May 2000 - openSUSE Users - openSUSE Mailing Lists

RE: [SLE] Can't locate module synth0?
by kevin.jackson＠jhallpr.demon.co.uk 04 May '00

04 May '00

First up - trawl your /etc/modules.conf file and comment out that line (it will look similar to 'alias synth0 On' without the single quotes. Or... Secondly, did you recompile your kernel and get this message on bootup? If so make sure your System.map file is the right one for your kernel version. Kev > -----Original Message----- > From: Ole Kofoed Hansen [mailto:k01164@ko.sdu.dk] > Sent: 04 May 2000 10:47 > To: suse-linux-e(a)suse.com > Subject: Re: [SLE] Can't locate module synth0? > > > At 05:25 04-05-00, you wrote: > >Hello Linux folks, > >I've got this message in /var/log/warn: > >Can't locate module synth0 > >Could somebody tell me please what does it mean? > >What this is module for? > > I would guess that it is a module for using > FM-Synth with a MIDI sound device. > > I don't know exactly why it is complaining > or how to fix it though. > > Regards > > Ole Kofoed Hansen > okh(a)post.cybercity.dk > ICQ# 25773325 > > > -- > To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com > For additional commands send e-mail to > suse-linux-e-help(a)suse.com > Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ > -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

RE: [SLE] setting color depth with graphical login
by psims＠lombard.co.uk 04 May '00

04 May '00

Edit /etc/XF86Config and insert "DefaultColorDepth 16" for 16-bit (substitute24 or 32 if you want that) in the section for your X server - example below (from a SaX-generated file) Section "Screen" Driver "SVGA" Device "Primary card" Device "Primary-monitor" DefaultColorDepth 16 Subsection "Display" ........ On Thursday, May 04, 2000 9:12 AM, Damian Slavek [SMTP:damianks@netnet.net] wrote: > I am using kdm for logins on this 6.4 machine and it always defaults > to 8 bpp. I would like it to be started at 16 bpp ( 24 slows down performance a > bit ) and have the users sessions started at 16 bpp also. Is there a file I can > set this in? I have to set up X using xf86config and edit XF86Config > afterwards because I have an old monitor and a crappy vid card. I have tried > commenting out the 8 bpp section for my video card of XF86Config and also tried > setting the resolution higher than the vid card supports for 8 bpp color depth. > Both result in X not starting at all when I boot to run level three. I have > tried and X works if I start it from the command line using "startx -- -bpp > 16". It looks sweet BTW, I didn't know linux could look this good. I have > tried searches on man pages for this to no avail. > > I would like to thank everyone for the info on switching to OSS for my > CMI8330. That was easier than setting up any sound card I have done in > windows. > > damianks > > -- > To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com > For additional commands send e-mail to suse-linux-e-help(a)suse.com > Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ "WorldSecure Server <lombard.co.uk>" made the following annotations on 05/04/00 11:27:10 ------------------------------------------------------------------------------ The opinions expressed within this email represent those of the individual and not necessarily those of Lombard. The contents of this Email may be privileged and are confidential. It may not be disclosed to or used by anyone other than the addressee(s), nor copied in any way. If received in error, please advise the sender, then delete from your system. Should you wish to use Email as a mode of communication, Lombard North Central PLC are unable to guarantee the security of Email content outside of our own computer systems. Lombard North Central PLC Registered in England No 337004 Registered Office 3 Princess Way Redhill Surrey RH1 1NP A Member of the Royal Bank of Scotland Group ============================================================================== -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] U-160 SCSI
by cillana＠teleline.es 04 May '00

04 May '00

Hi, I've asked this question previously and I've not got any answer and so I don't know if there is anyone with the same problem or had got this problem. I'm a user of Suse 6.3 and waiting for the version 6.4 to be available by my provider (desesperatly waiting) and I'm buying a new computer with U-160 SCSI ADAPTEC adaptor (19160), but I've not seen it in your cdb.suse.de site and I don't know if it means that it is not supported by Linux or by Suse or if it can work as if it was another Adaptec card. ¿Is there any support for U-160 SCSI in Linux? Besides, what means, in the www.adaptec.com site, that they are thinking about give support in Linux. When? Thanx in advance Carlos -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] setting color depth with graphical login
by damianks＠netnet.net 04 May '00

04 May '00

I am using kdm for logins on this 6.4 machine and it always defaults to 8 bpp. I would like it to be started at 16 bpp ( 24 slows down performance a bit ) and have the users sessions started at 16 bpp also. Is there a file I can set this in? I have to set up X using xf86config and edit XF86Config afterwards because I have an old monitor and a crappy vid card. I have tried commenting out the 8 bpp section for my video card of XF86Config and also tried setting the resolution higher than the vid card supports for 8 bpp color depth. Both result in X not starting at all when I boot to run level three. I have tried and X works if I start it from the command line using "startx -- -bpp 16". It looks sweet BTW, I didn't know linux could look this good. I have tried searches on man pages for this to no avail. I would like to thank everyone for the info on switching to OSS for my CMI8330. That was easier than setting up any sound card I have done in windows. damianks -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

[SLE] Can't locate module synth0?
by alex＠daniloff.com 04 May '00

04 May '00

Hello Linux folks, I've got this message in /var/log/warn: Can't locate module synth0 Could somebody tell me please what does it mean? What this is module for? Thanks in advance, Alex -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

[SLE] software-raid
by sander.van.vugt＠azlan.nl 04 May '00

04 May '00

Hi there, Is it possible to configure a software-RAID during installation? If not, is there any easier way than editing /etc/raidtab etc. on SuSE Linux? thanks, Sander ********************************************************************** Disclaimer This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the Azlan Holdings bv and/or subsidiary. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200. ********************************************************************** -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

Re: [SLE] Going from analog to dsl modem... now what?
by creimer＠rahul.net 04 May '00

04 May '00

----- Original Message ----- > Here is my dhclient.conf. > Hope it helps. <snip> I can't say whether it works or not. My mucking about the system had unearthed some problems that had previously laid undisturbed. I will probably be re-installing Linux again on this machine before I can make another attempt at getting the DSL modem to work. Thanks! Christopher Reimer -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] Sportster 128k ISDN
by pc_circus＠yahoo.com 04 May '00

04 May '00

Hello, I currently am trying to get my Sportster 128k ISDN / internal ISA device to work. I keep getting errors like: Loading ISDN drivers ... /dev/isdnctrl: No such device ok... /dev # ls isdnc* isdnctrl isdnctrl10 isdnctrl13 isdnctrl2 isdnctrl5 isdnctrl8 isdnctrl0 isdnctrl11 isdnctrl14 isdnctrl3 isdnctrl6 isdnctrl9 isdnctrl1 isdnctrl12 isdnctrl15 isdnctrl4 isdnctrl7 Or errors that say I don't have ippp0 .. /dev # ls ippp* ippp0 ippp10 ippp12 ippp14 ippp2 ippp4 ippp6 ippp8 ippp1 ippp11 ippp13 ippp15 ippp3 ippp5 ippp7 ippp9 Is there a "wvdial" program that will help probe for this device? I am using SuSE6.4 / 2.2.14 If anyone has this device configured and running successfully in the USA, please fill me in on the secret and any settings programs you may have used that helped get the most out of this device. Thanks John ===== "Do the world a favor and install Linux for a "Linux Buddy" today!" ...Where do you want to go NOW! __________________________________________________ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] netscape and true type fonts
by neonatus＠udba.org 04 May '00

04 May '00

Hi! I have just installed xfsft couse I wanted to see pages on the net as they are supposed to look. Can someone tell me what all has to be done in order to actually view the true type fonts in netscape. Or to give me some URL's to some pages that use some standard TT fonts. THX in advance! Bostjan -- Bo¹tjan Müller [NEONATUS], neonatus(a)gimp.thz.net, http://surf.to/NEONATUS For my PGP key finger: neonatus(a)gimp.thz.net, RSA id: 0x90178DBD, ICQ #:7506644 Celular: +386(0)41243189, Powered by S.u.S.E. Linux 6.2, Student of VFUL Speak softly and carry a cellular phone. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 3

RE: [SLE] [Waaay OT] I'm back :)
by kevin.jackson＠jhallpr.demon.co.uk 04 May '00

04 May '00

What a damned fine day to be born on - 25th April! I will have to say a bigger Congratulations now! Kev > -----Original Message----- > From: Jon Pennington [mailto:jpennington@atipa.com] > Sent: 03 May 2000 15:49 > To: suse-linux-e(a)suse.com > Subject: Re: [SLE] [Waaay OT] I'm back :) > > > On Wed, May 03, 2000 at 09:42:03AM -0500, Jon Pennington wrote: > > > Caitlin Rosalie Pennington was born at 9:06 PM, CST; she, > her mother, > > Whoops; meant to specify that she was born on Tuesday, April 25, as > noted in some of the pictures' date-stamp ;). > > -- > -=|JP|=- > Jon Pennington | Atipa Linux Solutions -o) > jpennington(a)atipa.com | http://www.atipa.com /\\ > Kansas City, MO, USA | 816-241-2641 x121 _\_V > > 6D04 39E0 CAE9 9ADA 2CA3 2EBE 898A 6C37 CA1E A29C > > -- > To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com > For additional commands send e-mail to > suse-linux-e-help(a)suse.com > Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ > -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0