August 2001 - openSUSE PPC - openSUSE Mailing Lists

Still no news
by mark grewar 12 Aug '01

12 Aug '01

I still cannot load SuSE 7.1 on my iMac, even though going by the manual and by experts advice, Why?! Surely, its not much to ask for - the EXACT things to type into the firmware to allow a bootup into SuSE. Its not that SuSE is not working, Its just that it won't boot on its own!! Why should I use a CD1 to boot when I don't even want mac on my ppc?? Can anyone help me? The SuSE people can't! - and don't ask me why yaboot and chooser don't work - they were done properly on OS9.1 and I prefer to use OS X as a partition, but no one seems to know how to just use OS X and SuSE 7.1 on the same hard drive. Many thanks, Mark

1 0

Unwanted attachments
by John A Ure 09 Aug '01

09 Aug '01

I won't be the only one to complain about this - but if any other unthinking subscriber sends out a 1.7 mb attachment (or any attachment for that matter) to everyone on this list, then that's the end of my involvement. -- John A. Ure (john(a)jaure.demon.co.uk) Fax(UK): 0870 056 8174; Fax(Outside UK): +44 870 056 8174

1 0

Re: [suse-ppc] suse linux and new power mac G4
by Jean-Francois Donati 09 Aug '01

09 Aug '01

Thanks for the trick about the oschooser. It works well now. It was really a pain having to go through the openfirmware each time. The modem works as well, but only when the new ppp rmp (ie ppp-2.4.0-3.ppc.rpm) is installed. This is a good point. I still get the `eth0 PHY reset timeout !` each time i boot, but it does not look to be fatal. Sound does NOT work. I installed the modules-alsa.conf, included the line in the module.conf file (at the same location as in the example module.conf file posted on your web site). I did rcalsaound start as root and got the alsa sound driver started (driver name: snd-card-awacs). I am not too sure about alsamixer: i cannot toggle between the various channels. I used the kde mixer instead (and checked that unmuting channels with the kde mixer unmuted channels in the alsamixer as well) and unmuted all channels that could be unmuted. In particular, I unmuted headphone, which seems to be the channel that controls the volume of the internal speaker (this is the one to move to control the sound on the pismo at least). But nothing happens. I don't even get the system beep. Color table is just as POOR. I tried to remove the `video=ofonly' kernel argument, and it makes no difference at all. I tried to run sax2 -a and it essentially rebooted the x server (i'm not too sure whether it did something else: it did not update the /etc/XF86Config file in any case. Note that I'm still in XFree86 3.3. I need a proper XF86Config file (new version, the one that goes in /etc/X11) to switch to 4.0.1. I tried to make one that include the Screen section you suggested, but it need also a Device section that contains more than what i have at the moment (Identifier "Primary-Card"). I've read somewhere that there is a nvidia driver called nv, even for ppc, but that this driver does not work very well for the geforce2 mx. May be it does not work for acceleration, but it may help for the colors (it's really the x11 colors that don't work, the colors in console mode - init 2 - seem ok). Is this right?? I don't have this driver on the suse7.0ppc disc, and I have no idea of what i need to specify for the kernel arguments and for the XF86Config Device section (in particular BoardName, BusID, Option). Would you have it somewhere, or at least some idea of where i could find it?? Any help would be very welcome. Thanks again.

1 0

Fwd: GXT2000p adapter + suse 7.1
by Alberto Da Milano 09 Aug '01

09 Aug '01

Hi experts, yesterday I read in Suse support DB that there is a new adapter supported in IBM RS/6k env. It seems that it is necessary to have a recent kernel (2.4.6 ) and an openfirmware driver : I suppose it means I have to download the latest microcode for the workstation I want to install. The URL is http://sdb.suse.de/sdb/en/html/olh_ppc_hardware_ibm.html (this is the whole line of info): GXT 2000P (requires kernel 2.4.6 and newer, OpenFirmware driver) Is there someone who can kindly suggest me how to configure the last kernel in order to have the support for this adapter? ( for example if I have to activate fb for MATROX (???) or else...) or better if is there a precompiled kernel I can download? And what is exactly an openfirmware driver? Thanks in advance and best regards Alberto bat21(a)libero.it -------------------------------------------------------

2 2

Still cannot get SuSE 7.1 to boot without cd1
by Mark Grewar 08 Aug '01

08 Aug '01

Hello SuSE People. Thank you all for your help the last week. I Still cannot get SuSE 7.1 to boot without cd1, I did ALL the correct things - only one thing was different from others; My /etc/fstab had the /dev/hda9 /mac/MacOS9.1 hfs as ro and not rw! I could not work out hot to fix this. I really would like to use only linux on my iMac, so, is there a magic formula i can type into the firmware to finally allow an install of SuSE 7.1 to bot on powering up? (my firmware crashed after doing last installs as per manual many thanks again Mark.

2 1

Re: [suse-ppc] suse linux and new power mac G4
by Jean-Francois Donati 08 Aug '01

08 Aug '01

You can find below the files you requested. The first one is the output from Display Name Registry 1.1, the second one from dmesg and the third one the gzipped tar file produced by suse_hw_info.sh. It corresponds to a linux suse 7.0 implementation updated with kernel-benh.rpm. Not working at the moment is: the colour map in X11 is complete rubbish (eg the standard Konsole setup gives black text on black background, but using the `System colors' of the Schema option gives you black on white. But still, you get colour problems with many apps. Do you have any ideas of how to fix this issue?? the accelerated video card support does not work. I did not try to update to xfree 4.1 yet (i'm still in 3, ie the basic 7.0 setup). Shall i try, and in which case, which XF86Config is expected to give me the best results?? ethernet does not work. I get the `eth0 can't locate modprobe module' error. It looks as if i don't even have the gmac module. Would this fix the problem?? Where should i find it?? sound does not work either. yast2 does not detect any problem and tells me that it should work (the sound card is an awacs card if i remember correctly). modem probably works but i did not try yet. As far as yaboot is concerned, i can boot using yaboot, but only by typing: boot ultra1:8,\\yaboot in the open firmware enviromnent. The oschooser (supposed to send this message to the open firmware) does not work. Is there a way to make this work, and in particular the use of the space bar to toggle between macos and linux, which i find very convenient ?? Thanks again very much for your help. jean-francois.

4 3

Drucker an der seriellen Schnittstelle
by Ritchie-W＠t-online.de 08 Aug '01

08 Aug '01

hallo, ich versuche derzeit meinen Postscript Drucker an der seriellen Druckerschnittstelle von meinem Powerbook anzuschliessen. Unter MacOS kein Problem, jedoch habe ich bis jetzt noch kein Erfolg auf der Linux Seite. Das Problem ist, das ich nicht weiss, welches Device die Modem Drucker Schnittstelle vom Mac verwendet. Ein Blick in die Boot-og Datei zeigt mir folgende Zeilen <4>PowerMac Z8530 serial driver version 2.0 <4>ttyS0 at 0xcb809020 (irq = 15) is a Z8530 ESCC, port = modem-printer <4>ttyS1 at 0xcb810000 (irq = 16) is a Z8530 ESCC, port = infrared (IrDA) <4>ttyS2 at 0xcb816020 (irq = 79) is a Z8530 ESCC, port = internal-modem ( Ich vermute daher das ttyS0 der Modem-Drucker darstellt. jedoch hat folgendes Kommando keine Wirkung gezeigt. echo -en "Dies ist eine Testzeile /f" > /dev/ttyS0 Wie kann ich unter Linux die Baudrate, parity, etc.. aendern. Und noch besser waere, wie ist die Einstellung einer Apple-tal Verbindung und wie bekomme ich das Protokoll auf diese Schnittstelle ? Viele Grüße Richard

2 1

Re: [suse-ppc] suse linux and new power mac G4
by Jean-Francois Donati 07 Aug '01

07 Aug '01

> > I dont think you will see much performace difference in Linux and > rage128 are well supported. > No idea if nvidia will ever provide ppc drivers, where did you see a ppc > driver on the xfree86 site? > I haven't seen a driver on the xfree86 site, just a file mentionning that XF86 version 4.1 supports the nvidia card. And they have a ppc version, not of the driver, but of xfree86 4.1. And they don't mention explicitely that the ppc version of xfree86 doesn't support the nvidia card in accelerated mode. May be it's just incomplete information about their packages. > > At first, make sure you can always boot into Linux with a kernel that is > know to work. Booting via CD would be an option. > > You can find newer kernels here: > /mirror/SuSE/ftp.suse.com/pub/suse/ppc/kernel/BETA/sleep/ > There is a kernel-benh.rpm, it installs /boot/vmlinux-benh, configure > lilo to boot that kernel, you still need "video=ofonly" > Boot that kernel and send me the "dmesg" output. > There is a script to collect needed infos from the /proc filesystem: > /mounts/mirror/SuSE/ftp.suse.com/pub/suse/ppc/update/BETA/suse_hw_info.sh > But it can hang your machine. > I booted from a 2.4 ppc kernel that i got from the web. But i didnot have the corresponding system map nor the set of modules. Meanwhile, i dowloaded benh kernel 2.4.6 with system map AND modules. Is this one ok?? Or should i use the 2.4.7-pre6 that you have on the suse/ppc/kernel/BETA/sleep ftp area (there is no specific set of modules available though)? By the way, I'm not too sure of what I actually need to do to properly upgrade suse7.0 to the 2.4.6 kernel. I tried this on my pismo (where i had a a working suse7.0 config with xfree4.0 activated, with an upgrade to kernel 2.2.17pre20-ben3, which works nice except for firewire, sound, sleep and dvd drive). Although it booted correctly, trackpad was no longer active (/usr/bin/trackpad was giving the message "no trackpad!" at boot). I tried to install several additional rpm's (in particular devs-2001.1.2-11.ppc.rpm and modutils-2.4.2-11.ppc.rpm) but it did not improve the situation. Also, sleep was behaving strangely: the pismo went to sleep at bizarre times, even while i was typing. When waking up, strangely enough the trackpad was active although i did nothing specific in that aim (the `trackpad notap' setting seems to be lost each at each wake up though). The copy/paste mouse utility was no longer active with the 2.4.6 kernel, while it was working ok with the 2.2.17 one. Obviously, I missed some crucial steps in the upgrade. Any ideas of what it can be?? I usually don't use lilo to boot, but rather yaboot (using the space bar to toggle between macos and linux). It looks as if it does not work on the G4. As if the open firmware did not get the message from the os-chooser. I have to boot in the open firmware enviroment, and mention explicitely that i need to boot using yaboot. Any ideas of what is causing this?? The normal procedure works perfectly with the pismo, but not with the G4. Is this due to a newer openfirmware?? I don't have the G4 here, but will bring it back tomorrow for new tests. I tried the suse_hw_info.sh script on my pismo and it worked fine, so hopefully,it will work for the G4 as well. I will send you all the information tomorrow. > If you have OS9 installed, download the PCI DDK 3.0 from > http://developer.apple.com/sdk/: > ftp://ftp.apple.com/developer/Development_Kits/PCI_DDK_3.0.sit.hqx > There is a tool Display Name Registry 1.1, start that, go to > "file, save as.." activate "save all entries" and send me the file. > > I'm not sure how to solve the black text on black background bug, you > could try to activate 256 colors in MacOS, the OF driver will use that. > I also downloaded PCI_DDK_3.0 ok, tried Display Name Registry 1.1 on the pismo and it seems to work fine. I'll do all this on the G4 and will send you the output tomorrow. Meanwhile, any info you can have on upgrading the pismo to the 2.4.6 benh kernel is welcome. The simplest way is probably to buy suse7.1ppc, and i may do it if suse7.3ppc is not expected before a while ;o) ... Thanks again very much for your help!! > > > Gruss Olaf > > -- > $ man clone > > BUGS > Main feature not yet implemented... >

2 1

Suse 7.1 PPC and Ximian Gnome
by Janus Sandsgaard 07 Aug '01

07 Aug '01

Hi Are people at Suse helping Ximian to bring Red Carpet to Suse 7.1 PPC? I would love to see Red Carpet on my Pismo; the perfect tool for keeping your system up to date; The only thing I miss at PPC compared to my x86-system. -j -- Netcetera Aps Men are from Earth. Brolaeggerstraede 4 Women are from Earth. DK - 1211 Koebenhavn K Deal with it!

2 1

Gnome update?
by BillT＠Mahagonny.com 07 Aug '01

07 Aug '01

Has anyone installed the GNOME update for ppc 7.1 that is on the ftp site? Is there an easier way to do it than selecting each file individually with Yast? Thanks, -- BillT(a)Mahagonny.com PGP KeyID#: 0xFB966670

2 1