Hi,
For those who is interested in the next openSUSE stable release which
would be named Leap, found it's new home.
I'm moving from my own home project home:k0da:Power42 into
"official" ports project openSUSE:Leap:Ports
Repository for Power is images_ppc, the rest is the ARM guys playground.
JFYI.
Have fun,
Dinar
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
-----Original Message-----
From: Marcus Meissner <meissner(a)suse.de>
On Thu, Dec 03, 2015 at 09:34:59PM -0500, larrystotler(a)netscape.net wrote:
>> I tried sending this email twice from my gmail account. Is this list down?
>No, it was received and replied I think.
Hmmm. Well, I saw this one go to the list, but not the other I sent. So I never got to see the reply.........
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
I tried sending this email twice from my gmail account. Is this list down?
I recently acquired an original Powermac G5 (7,2) dual 2.0Ghz system.
Ram has been upgraded to 8GB. I have a 250GB hard drive installed.
I have been unable to install a working system. YaST originally
refused to partition my disk because it had a GPT table. So I used
this guide:
https://en.opensuse.org/SDB:Install_openSUSE_on_an_Apple_PPC_computer
pdisk reports 5 partitions:
1. Apple_partition_Map
2. Apple_bootstrap
3. Linux (/boot)
4. Linux_Swap
5. Linux (/)
However, I get a segmentation fault when I run pdisk -l
When I edit the partition setup in YaST after creating it in pdisk as directed by the about guide, I get the following error:
Warning: Some subvolumes of the root filesystem are shadowed by mount
points of other filesystem. This could lead to problems.
Evidently, it creates a subvolume boot/grub2/powerpc-ieee1275 on
device /dev/sda5
When I get to the installation Settings screen I get the following error:
Error
Internal error. Please report a bug report with logs.
Details: there is no prep partition
Caller: /usr/share/YaST2/lib/bootloader/stage1.rb:97.in 'propose_ppc'
Error
Internal error. Please report a bug with logs.
Details: undefined method '[]' for false:FalseClass
Caller: /user/share/YaST2/lib/installation/proposal_runner.rb:437:in
'block in make_proposal'
Calling the YaST modeule inst_proposal has failed
More information can be found near the end of the 'var/log/YaST2/' directory
This is worth reporting a bug at http://bugzilla.suse.com/.
Please, attach also all YaST logs stored in the 'var/log/YaST2/' directory
See http://en.opensuse.org/Bugs/YaST for more information about YaST logs.
Any suggestions?
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
I recently acquired an original Powermac G5 (7,2) dual 2.0Ghz system.
Ram has been upgraded to 8GB. I have a 250GB hard drive installed.
I have been unable to install a working system. YaST originally
refused to partition my disk because it had a GPT table. So I used
this guide:
https://en.opensuse.org/SDB:Install_openSUSE_on_an_Apple_PPC_computer
pdisk reports 5 partitions:
1. Apple_partition_Map
2. Apple_bootstrap
3. Linux (/boot)
4. Linux_Swap
5. Linux (/)
However, I get a segmentation fault when I run pdisk -l
When I edit the partition setup in YaST, I get the following error:
Warning: Some subvolumes of the root filesystem are shadowed by mount
points of other filesystem. This could lead to problems.
Evidently, it creates a subvolume boot/grub2/powerpc-ieee1275 on
device /dev/sda5
When I get to the installation Settings screen I get the following error:
Error
Internal error. Please report a bug report with logs.
Details: there is no prep partition
Caller: /usr/share/YaST2/lib/bootloader/stage1.rb:97.in 'propose_ppc'
Error
Internal error. Please report a bug with logs.
Details: undefined method '[]' for false:FalseClass
Caller: /user/share/YaST2/lib/installation/proposal_runner.rb:437:in
'block in make_proposal'
Calling the YaST modeule inst_proposal has failed
More information can be found near the end of the 'var/log/YaST2/' directory
This is worth reporting a bug at http://bugzilla.suse.com/.
Please, attach also all YaST logs stored in the 'var/log/YaST2/' directory
See http://en.opensuse.org/Bugs/YaST for more information about YaST logs.
Any suggestions?
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
I recently acquired an original Powermac G5 (7,2) dual 2.0Ghz system.
Ram has been upgraded to 8GB. I have a 250GB hard drive installed.
I have been unable to install a working system. YaST originally
refused to partition my disk because it had a GPT table. So I used
this guide:
https://en.opensuse.org/SDB:Install_openSUSE_on_an_Apple_PPC_computer
pdisk reports 5 partitions:
1. Apple_partition_Map
2. Apple_bootstrap
3. Linux (/boot)
4. Linux_Swap
5. Linux (/)
However, I get a segmentation fault when I run pdisk -l
When I edit the partition setup in YaST, I get the following error:
Warning: Some subvolumes of the root filesystem are shadowed by mount
points of other filesystem. This could lead to problems.
Evidently, it creates a subvolume boot/grub2/powerpc-ieee1275 on
device /dev/sda5
When I get to the installation Settings screen I get the following error:
Error
Internal error. Please report a bug report with logs.
Details: there is no prep partition
Caller: /usr/share/YaST2/lib/bootloader/stage1.rb:97.in 'propose_ppc'
Error
Internal error. Please report a bug with logs.
Details: undefined method '[]' for false:FalseClass
Caller: /user/share/YaST2/lib/installation/proposal_runner.rb:437:in
'block in make_proposal'
Calling the YaST modeule inst_proposal has failed
More information can be found near the end of the 'var/log/YaST2/' directory
This is worth reporting a bug at http://bugzilla.suse.com/.
Please, attach also all YaST logs stored in the 'var/log/YaST2/' directory
See http://en.opensuse.org/Bugs/YaST for more information about YaST logs.
Any suggestions?
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org