openSUSE PPC May 2012

ppc@lists.opensuse.org

2 participants
3 discussions

[opensuse-ppc] lspci errors
by Andreas Färber 28 Nov '12

28 Nov '12

Hi, I'm seeing the following errors from lspci: pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8 pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8 pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0 pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0 pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8 My box has an IBM GXT6500P DVI graphics card plugged into PCI-X. After removing that card physically, I got an additional error: pcilib: sysfs_fill_slots: Couldn't parse entry address 0000:00 pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8 pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8 pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0 pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0 pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8 The stdout output is identical between both, according to diff(1): 0001:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0001:cc:01.0 Mass storage controller: Promise Technology, Inc. 20275 (rev 01) 0001:d0:01.0 SCSI storage controller: Mylex Corporation AcceleRAID 600/500/400/Sapphire support Device (rev 04) 0002:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03) 0002:cc:01.0 USB controller: NEC Corporation USB (rev 43) 0002:cc:01.1 USB controller: NEC Corporation USB (rev 43) 0002:cc:01.2 USB controller: NEC Corporation USB 2.0 (rev 04) 0002:d0:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) 0002:d0:01.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03) Is this a bug in pcilib? A hardware defect? How to verify? Thanks, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org

1 1

[opensuse-ppc] Solved: osc on minimal server install
by Andreas Färber 31 May '12

31 May '12

Hi, I had been having problems installing osc due to its python-urlgrabber dependency. This problem persisted now that finally a new set of packages got published to powerpc.opensuse.org. It turned out, python-urlgrabber had a dependency on python = 2.7, which conflicted with patterns-openSUSE-minimal_base-conflicts. Uninstalling the latter resolved the issue. Where does that package come from, why doesn't it like python 2.7, and can we fix this properly? There is a similar report for 12.1 x86_64 [1]. Regards, Andreas [1] http://www.howtoforge.com/perfect-server-opensuse-12.1-x86_64-with-apache2-… -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org

2 1

[opensuse-ppc] Re: [opensuse-arm] xorg install problems
by Andreas Färber 30 May '12

30 May '12

Am 30.05.2012 10:45, schrieb Stefan Dirsch: > On Wed, May 30, 2012 at 10:38:45AM +0200, Alexander Graf wrote: >> >> On 30.05.2012, at 10:35, Stefan Dirsch wrote: >> >>> On Wed, May 30, 2012 at 10:15:08AM +0200, Alexander Graf wrote: >>>>> [...] Then I got the following missing requirements: Problem: nothing >>>>> provides xf86-input-vmmouse needed by >>>>> xorg-x11-driver-input-7.6_1-1.1.noarch Problem: >>> >>> Seems this package has not been built (yet) on ARM. But nevertheless it makes >>> sense to change this Requires to a Recommends, since it's only needed by >>> VMWARE anyway. >> >> Heh, last time I checked the vmmouse driver had x86 assembly code >> inside. I'm fairly sure that's hard to compile on ARM :). > > Oops. In that case also the build should be disabled. Could somebody please > verify that the build fails? > > --> obs:://X11:XOrg/xf86-input-vmmouse > >>>>> nothing provides intel-gpu-tools needed by >>>>> xorg-x11-driver-video-7.6_1-2.1.noarch I guess, my install will be >>>>> functional without these :) Once checked, what is the preferred way of >>>>> fixing it? >>> >>> That one should also be changed to a Recommends. >> >> Great! I'm surprised nobody saw this for PowerPC yet. > > I guess ARM is meanwhile better tested than PPC. ;-) Personally I've been doing more testing on ppc than on arm, but on arm apparently the packages are published more frequently. Took about a month to get new packages to the ppc repositories. ;-) Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org

1 0

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

openSUSE PPC May 2012