July 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] acpid requires systemd?
by Felix Miata 25 Apr '24

25 Apr '24

Can this be true? If so, why? Zypper won't let me upgrade acpid without breakage unless systemd is installed too. I have systemd locked out, as I'd rather test things I can understand in Factory, not major overhaul stuff. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

[opensuse-factory] receiving files via bluetooth fails
by Olaf Hering 24 Sep '17

24 Sep '17

Some months ago it was possible to receive files via bluetooth with TW. But since some weeks that fails for me. I waited for GNOME 3.20 and the new bluez in the hope it will fix itself, but the failure remains: Apr 05 18:01:28 probook obexd[3042]: CONNECT(0x0), (null)(0xffffffff) Apr 05 18:01:28 probook obexd[3042]: CONNECT(0x0), (null)(0x0) Apr 05 18:01:32 probook obexd[3042]: PUT(0x2), (null)(0xffffffff) Apr 05 18:01:32 probook obexd[3042]: open(/home/olaf/.cache/obexd/GSIBFY): No such file or directory (2) Apr 05 18:01:32 probook obexd[3042]: PUT(0x2), NOT_FOUND(0x44) Apr 05 18:01:32 probook obexd[3042]: DISCONNECT(0x1), (null)(0xffffffff) Apr 05 18:01:32 probook obexd[3042]: DISCONNECT(0x1), SUCCESS(0x20) Apr 05 18:01:32 probook bluetoothd[1520]: Unable to get io data for Object Push: getpeername: Transport endpoint is not connected (107) Apr 05 18:01:32 probook obexd[3042]: disconnected: Transport got disconnected Apr 05 18:02:42 probook obexd[3042]: CONNECT(0x0), (null)(0xffffffff) Apr 05 18:02:42 probook obexd[3042]: CONNECT(0x0), (null)(0x0) Apr 05 18:02:42 probook obexd[3042]: PUT(0x2), (null)(0xffffffff) Apr 05 18:02:42 probook obexd[3042]: open(/home/olaf/.cache/obexd/1OLQFY): Operation not permitted (1) Apr 05 18:02:42 probook obexd[3042]: PUT(0x2), FORBIDDEN(0x43) Apr 05 18:02:42 probook obexd[3042]: DISCONNECT(0x1), (null)(0xffffffff) Apr 05 18:02:42 probook obexd[3042]: DISCONNECT(0x1), SUCCESS(0x20) Apr 05 18:02:42 probook bluetoothd[1520]: Unable to get io data for Object Push: getpeername: Transport endpoint is not connected (107) Apr 05 18:02:42 probook obexd[3042]: disconnected: Transport got disconnected First I tried to remove /home/olaf/.cache/obexd, but nothing seems to feel responsible to create this dir as seen with the first error. Then I created it with mkdir -m07777, and that just gives the EPERM error as before. strace shows that it gets some "forbidden" from dbus. Is receiving files working for anyone else? Also the rfkill thing does not work reliable. NetworkManager finds the device according to syslog, but the GNOME bluetooth thing finds nothing. Something softblocks it: root@probook:~ # hciconfig -a hci0 reset Can't init device hci0: Operation not possible due to RF-kill (132) root@probook:~ # rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 4: hci0: Bluetooth Soft blocked: yes Hard blocked: no Need to run 'rfkill unblock 4' manually to get it going. Once that it done its appearently possible to use the UMTS, and sending a file works as well. Olaf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] add pam_faillock for factory, 42.2, SLES 12 SP2
by Jason Newton 02 Feb '17

02 Feb '17

I'd consider adding it as an update, too, to 42.1 and SP1, at least in aux repositories - preferably to updates :-). I've spoken with the author of pam_faillock and I believe it to be superior to pam_tally2, particularly concerning handling of screensaver handling. pam_faillock is part of the recommended RHEL configuration for secured computers and holding out for pam_tally2 also presents a nasty non-uniformity for nearly the same functionality (although, weaker). I've asked the author, Tomas Mraz, to make the patch available standalone - which he has provided here: http://people.redhat.com/tmraz/pam_faillock/ I would've have submitted my branch against factory pam incorporating the patch - but unfortunately I seem to be having some automake/libtool issues in the build that I cannot figure out - so I'm going to have to leave that effort to someone who knows those build tools better than I. I also intend to poke upstream to ask them to reconsider adding that patch into master. -Jason -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] How can calibre be allowed access through YaST firewall?
by Chan Ju Ping 24 Sep '16

24 Sep '16

Unlike rsync, or KDE Connect, there is no option to automatically allow the Calibre ebook manager to open ports so external devices can connect to it. So far, my solution has been to disable the firewall before connecting my device to Calibre via the Calibre Companion app on Android. For those unfamiliar with the process, Calibre Companion can sync ebooks from the desktop's library to the Android device's library, thus eliminating the need for wires and further organization of books. If I know I am using port 9090 for Calibre, is there a way to allow this connection in the Firewall? Has anyone else attempted this setup? Running netstat shows this additional parameter enabled when my tablet is connected to the computer. tcp 0 0 10.42.0.1%2457529:39858 10.42.0.250%328:sesi-lm ESTABLISHED

3 8

[opensuse-factory] Gstreamer*0.10* for sale!
by Bjørn Lie 07 Sep '16

07 Sep '16

More than 3 years ago upstream said enough is enough and pulled the plug on gst-0_10 branch, and ever since then we the gnome-maintainers have been carrying around the abandoned packages, both because we care and at the time of upstreams kill-off point we had a lot of packages depending on them. Since then we have quietly been porting the ones we care about or dropping them from Tumbleweed. We have however now reached a point where we can not in good conscious say that we care for gst-0_10 at all anymore, and would as a result offer up maintainership of said packages for those that still depend on them / want them to stay in Tumbleweed. Currently osc whatdependson openSUSE:Factory gstreamer-0_10 standard x86_64 gives this list [see end of email] of depending packages. If you as a maintainer are affected, please consider stepping up and requesting maintainer via obs or email. The above said, maintenance burden is not very high currently, so don't fear taking responsibility, it mainly consists of tweaking packages to ensure their continued build. As a maintainer though I'd prefer that we could drop gst-0_10 from TW all the way, but acknowledge that this is not currently possible, but if everyone who have packages still depend on gst-0_10* do a real push to port or drop packages still dependent we could perhaps take the easy route out and just drop gstreamer-0_10. //Bjørn - on behalf of openSUSE GNOME maintainers. LIST: osc whatdependson openSUSE:Factory gstreamer-0_10 standard x86_64 gstreamer-0_10 : aegisub audacity boinc-client codelite e17 e_dbus echievements elementary elemines emotion-generic-players enlightenment eperiodique epymc erlang espeakedit etrophy evas-generic-loaders filezilla fityk flamerobin freqtweak gcompris gnuplot gnuradio gstreamer-0_10-plugin-crystalhd gstreamer-0_10-plugins-bad gstreamer-0_10-plugins-base gstreamer-0_10-plugins-gl gstreamer-0_10-plugins-good gstreamer-0_10-plugins-ugly hugin ignuit kde3-amarok kde3-kaffeine kdemultimedia3 kicad lekha libucil mathgl meson moodbar morituri perl-Alien-wxWidgets perl-Wx pgadmin3 plplot poedit presage psi+-plugins-psimediaplugin python-efl python-gstreamer-0_10 python-matplotlib python-wxWidgets python-wxWidgets-3_0 rage sffview shellementary terminology tintii urbanlightscape usbprog wammu wxGTK3-3_0 wxMaxima wxWidgets wxWidgets-3_0 wxWidgets-ansi wxWidgets-wxcontainer wxWidgets-wxcontainer24c wxhexeditor xchm xfce4-mixer xfce4-volumed xylib -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 11

[opensuse-factory] slow libreoffice
by Michal Hlavac 03 Sep '16

03 Sep '16

hi, using latest tumbleweed snapshot (nvidia driver 367.27) and libreoffice is very slow (e.g. switch between sheets in oocalc is about 2 - 3 seconds). And it looks like problem with UI drawing. And also I noticed that main menu is blinking when mouse moves over it. thanks, miso -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] Patch for Nvidia driver 367.35 on Kernel 4.7
by Bjoern Voigt 16 Aug '16

16 Aug '16

Users with Kernel 4.7 e.g. from Kernel_stable repository currently need a patch for most recent stable Nvidia driver 367.35. I attached the patch for interested users. The idea comes from: NVIDIA – Possible Kernel 4.7 Fix for 361.45.11 and 367.18.. Posted on May 31, 2016 by RG http://rglinuxtech.com/?p=1750 Greetings, Björn

3 2

[opensuse-factory] Gpg key expiring
by ianseeks 10 Aug '16

10 Aug '16

Hi Just got this message (see below) during a "zypper dup" - not sure if its significant but I just thought i'd post it as a reminder. Regards Ian Retrieving repository 'Printing' metadata ------------------------------------------------------------------------------------------------------------------------------------------- [\] The gpg key signing file 'repomd.xml' will expire in 14 days. Repository: Printing Key Name: Printing OBS Project <Printing(a)build.opensuse.org> Key Fingerprint: 7C8A8DA1 722FC4DF DA9FF1EF 669DEC9F 98C4529D Key Created: Tue 22 Jan 2008 20:46:28 GMT Key Expires: Sat 30 Jul 2016 13:07:15 BST (expires in 14 days) Rpm Name: gpg-pubkey-98c4529d-47965624 -- Qt: 5.6.1 KDE Frameworks: 5.24.0 kf5-config: 1.0 KDE Plasma: 5.7.1 Kernel: 4.6.3-1-default "openSUSE Tumbleweed (20160714) (x86_64)" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 22

[opensuse-factory] Leap 42.2 failed/unresolvable packages
by dieter 04 Aug '16

04 Aug '16

Hello, [1] provides a list of packages which are not building for Leap 42.2, e.g. due to unsatisfied dependencies. For some(most) of these a package for Tumbleweed exists and it seems mainly an issue of updating the package for Leap 42.2 e.g. on this list the reason given for kdevelop4 is "nothing provides kscreen < 5.3.0 needed by kdebase4-workspace". The current Leap 42.2 snapshot contains kscreen5-5.7.0-1.2 The current Tumbleweed snapshot contains kscreen5-5.7.0-1.1, and it contains kdevelop4-4.7.3-3.1. I just want to point this out in order to avoid accidental gaps in the final release. If there is a plan to perform these updates at a later time please ignore this post. Regards, Dieter [1] https://build.opensuse.org/project/monitor?commit=Filter%3A&failed=1&unreso… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] Leap desktop selection screen
by Ludwig Nussel 03 Aug '16

03 Aug '16

Hi, In the thread about lxdm we learned that we don't seem to have LXDE maintainers anymore. Yet we have LXDE on the DVD and offer it very prominently in the installer: https://openqa.opensuse.org/tests/230205#step/installer_desktopselection/6 So I wonder if putting LXDE in the spotlight like that still makes sense? Also, I wonder whether the minimal X selection adds much value. Those who want to use a different window manager could start off from text mode just as well, right? cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.com/ SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

13 20