August 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Cups >= 1.6
by Dimstar / Dominique Leuenberger 27 Aug '13

27 Aug '13

Hi all, GNOME 3.9.90 comes with a requirement for cups 1.6 (1.6.2 was released in March). The functionality offered: + Printers: - Poll remote CUPS servers for notifications. Is there a specific reason that we do still have cups 1.5.x in Factory? Any chance to update this? Best regards, Dominique -- Dimstar / Dominique Leuenberger <dimstar(a)opensuse.org> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] Failure to resume after entering sleep mode
by Thomas Taylor 27 Aug '13

27 Aug '13

OS 13.1-M4 w/KDE 4.11.00. After entering sleep mode the screen remains black (no video signal) upon attempting resume. The computer seems to resume as evidenced by hard disk activity but no video. I have not yet attempted to use hibernate mode but will try that tomorrow. The video card is an EVA GTX 550Ti (Nvidia 550 series) with default driver. Pertinent log files (messages, pm-suspend.log) are attached as Sleep.tar.bz2. The last time I attempted to install drivers from Nvidia website they would not compile against this kernel. I'll search bugzilla later and enter a new bug report if none is found. Any suggestions would be appreciated. Thanks, Tom -- Insight comes more often than not, from looking at what's been on the table all along. - David McCullough ^^ --... ...-- / -.- --. --... -.-. ..-. -.-. ^^^^ Tom Taylor - retired penguin - KG7CFC AMD Phenom II x4 955 -- 4GB RAM -- 2x1.5TB sata2 openSUSE 13.1_M4-x86_64 KDE 4.11.00, FF 22.0, claws-mail 3.9.2 registered linux user 263467

1 1

[opensuse-factory] Kscreen needs labelling for button functions in openSUSE 13.1
by Roman Bysh 26 Aug '13

26 Aug '13

Hello Listmates, Would anyone agree that Kscreen desperately requires labelling for the button functions? Can it be done in time for openSUSE 13.1? -- Cheers! Roman ------------------------------------------------------- openSUSE -- Get it! Discover it! Share it! ------------------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] Yast Modules: Summer Sale
by Lukas Ocilka 26 Aug '13

26 Aug '13

Hi, I've just announced the *Yast Summer Sale* at this blog: http://kobliha-suse.blogspot.cz/2013/08/yast-modules-summer-sale.html We are offering some great Yast modules for half the price now! :) If you are interested in having these modules in openSUSE and/or maintaining them, get in touch with us (here or at yast-devel) Thanks Lukas -- Lukas Ocilka, Cloud & Systems Management Department SUSE LINUX s.r.o., Praha -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 14

[opensuse-factory] MidnightCommander: long file-names in tar archives truncated
by dieter 25 Aug '13

25 Aug '13

Hello, I have noticed a problem of MidnightCommander in tar archives containing long file-names or long path-name + file-name, e.g. resulting from nested sub-directories. It seems the length of the path-name + file-name is limited to 100 characters, longer names are truncated. They are displayed truncated in the mc panel, and when the file (or its parent directory in the archive) is copied out of the archive with F5 it will have a truncated name. Therefore deeply nested tar archives can not safely be un-tarred with mc. For "current versions" of mc I could not find such a bug mentioned. steps to reproduce: mkdir testdir echo test > "testdir/testname_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789.txt" tar cJf testdir.tar.xz testdir start mc, enter testdir.tar.xz the filename is limited to testname_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123 The tar archive itself is correct and tar xf correctly restores the full file-names. If the same directory tree is zipped and the zip archive is entered with mc the filename is not truncated. The problem seems to be specific for the "utar://" vfs of mc. The problem is observed with the mc packages included in 12.3 (mc-4.8.1.4-2.1.2) and also with 13.1M4/factory (mc-4.8.9-2.2). Regards, Dieter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 28

[opensuse-factory] CMake Error | file RPATH_CHANGE could not write new RPATH
by Dmitriy Perlow 25 Aug '13

25 Aug '13

Hello. I found that Factory's cmake became incapable to build the package with rpath a month ago. See https://build.opensuse.org/package/live_build_log/home:DarkSS:stuff/plee-th… f.e. "-DCMAKE_SKIP_RPATH=ON" fixes the building process but the app became broken. Any ideas? -- Dmitriy DA(P).DarkneSS Perlow / Linux x64 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] lvm crypto workaround
by Peter Czanik 23 Aug '13

23 Aug '13

Hello, For those running into the problem, that lvm crypto is not working: remove splash=silent from boot parameters. This will show a text based console and password input, but at least works (and looks nicer for someone who started Linux on an i386 without graphics :-) ). Idea came from reading this bug report: https://bugzilla.novell.com/show_bug.cgi?id=834063 Now I can install factory on my company laptop, where policy requires encrypted HDD (but luckily does not rule out devel quality software :-) ). Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] URL for KDF repo?
by Thomas Taylor 22 Aug '13

22 Aug '13

Could someone supply me with the correct URL for KDF? The one I have doesn't get me to the correct location for KDE 4.11. Thanks, Tom -- Insight comes more often than not, from looking at what's been on the table all along. - David McCullough ^^ --... ...-- / -.- --. --... -.-. ..-. -.-. ^^^^ Tom Taylor - retired penguin - KG7CFC AMD Phenom II x4 955 -- 4GB RAM -- 2x1.5TB sata2 openSUSE 12.3-x86_64 KDE 4.10.00, FF 19.0, claws-mail 3.9.1 registered linux user 263467 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] gnome password dialog changes
by Marcus Rueckert 22 Aug '13

22 Aug '13

hi, recently gnome upstream changed the default to show the last character you typed into a password dialog. This is similar to what e.g. Android does. This didnt bother me because there was a setting to turn off that behavior: /etc/gtk-3.0/settings.ini gtk-entry-password-hint-timeout = 0 But with a new commit [1] they ignore that option now. I would like to ask to revert that last bit and leave the option intact for people who really dont want the new behavior. With kind regards, darix [1] https://mail.gnome.org/archives/commits-list/2013-July/msg03050.html -- openSUSE - SUSE Linux is my linux openSUSE is good for you www.opensuse.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 8

[opensuse-factory] librsvg downgraded in Factory
by Dominique Leuenberger a.k.a. Dimstar 22 Aug '13

22 Aug '13

Hi all, A few days ago, librsvg was updated to version 2.39.0; it is marked to address a security issue (allows to load random files from disk). The fix though seems a bit too restrictive, as it resulted in various applications not being able to load their files anymore (e.g. gnome-shell had no icons in the top panel, apps like evince missed their buttons). As a remediation, we reverted back to 2.37.0 (last release before). Note is to be given to the fact that 'zypper up' will not 'down'grade (it's in the name, no?) to 2.37.0 an would remain on the restrictive version. so if you already have the 'broken' librsvg version installed, either use 'zypper dup' (anyway, I'd say mostly advised in Factory), or take care yourself to install librsvg- So, as soon as Factory finishes building and publishing, you should really take care of that to enjoy your desktop. Cheers, and sorry for the trouble some of you might have had with this. Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] kernel error msg: No irq handler for vector (irq -1)
by Patrick Shanahan 21 Aug '13

21 Aug '13

Three times in last two days have received: Message from syslogd@Crash at Aug 21 14:53:29 ... kernel:[150387.099045] do_IRQ: 5.41 No irq handler for vector (irq -1) kernel-desktop-3.10.7-23.2.g771dec3.x86_64 other information req'd? bug report ??? -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Factory on susestudio
by Archie Cobbs 21 Aug '13

21 Aug '13

Dumb question... It seems like putting factory milestones on susestudio would really improve testing, because it would be so much easier for people to test their favorite program/configurations. The feature request was rejected however because it's "not really doable... the way Studio is set up" ... https://features.opensuse.org/309314 That seems a shame. Has there been any recent improvment in the "the way Studio is set up" that would make this more doable? -Archie -- Archie L. Cobbs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] need help mariadb error:ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
by doiggl＠velocitynet.com.au 21 Aug '13

21 Aug '13

Hello, How is this error fixed ? [1] Thanks Glenn [1] # mysql ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO) Steps I've done so far: # rpm -qa | grep -i mariadb | sort mariadb-5.5.32-1.2.x86_64 mariadb-bench-5.5.32-1.2.x86_64 mariadb-client-5.5.32-1.2.x86_64 mariadb-debug-version-5.5.32-1.2.x86_64 mariadb-errormessages-5.5.32-1.2.x86_64 mariadb-test-5.5.32-1.2.x86_64 mariadb-tools-5.5.32-1.2.x86_64 # /bin/systemctl restart mysql.service # /bin/systemctl status mysql.service mysql.service - LSB: Start the MySQL database server Loaded: loaded (/etc/init.d/mysql) Active: active (running) since Wed 2013-08-21 22:55:21 EST; 1min 12s ago Process: 18046 ExecStop=/etc/init.d/mysql stop (code=exited, status=0/SUCCESS) Process: 18272 ExecStart=/etc/init.d/mysql start (code=exited, status=0/SUCCESS) CGroup: /system.slice/mysql.service ├─18334 /bin/sh /usr/bin/mysqld_safe --mysqld=mysqld --user=mysql --pid-file=/var/run/mysql/mysqld.pid --socket=/var/run/mysql/mysql.sock --datadir=/var/lib/mysql └─18512 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/test.site.err --pid-file=/var/run/mysql/mysqld.pid --socket=/var/run/mysql/mysql.sock Aug 21 22:55:19 test.site systemd[1]: Starting LSB: Start the MySQL database server... Aug 21 22:55:21 test.site mysql[18272]: Starting service MySQL ..done Aug 21 22:55:21 test.site systemd[1]: Started LSB: Start the MySQL database server. # # ps -ef | grep -i mysql root 18334 1 0 22:55 ? 00:00:00 /bin/sh /usr/bin/mysqld_safe --mysqld=mysqld --user=mysql --pid-file=/var/run/mysql/mysqld.pid --socket=/var/run/mysql/mysql.sock --datadir=/var/lib/mysql mysql 18512 18334 0 22:55 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/test.site.err --pid-file=/var/run/mysql/mysqld.pid --socket=/var/run/mysql/mysql.sock root 18799 1566 0 23:00 pts/1 00:00:00 grep --color=auto -i mysql # -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] hanging login with gdm or auth subsystem
by Olaf Hering 21 Aug '13

21 Aug '13

With current Factory (I think it happend already last week) sometimes the autologin does not work. If that happens, even switching consoles does not work, no idea if systemd would allow it at this stage. ssh is already enabled, so this is what I see. Maybe the (null) in the gdm logfile name is part of the bug? Where should I start looking for the possible cause? I see no obvious errors in /var/log/messages. Olaf ... root 1405 0.0 0.0 0 0 ? S 17:00 0:00 \_ [kworker/2:0] root 1484 0.0 0.0 0 0 ? S 17:02 0:00 \_ [kworker/6:1] root 1497 0.0 0.0 0 0 ? S 17:05 0:00 \_ [kworker/1:2] root 1 0.0 0.0 51040 5924 ? Ss 16:47 0:01 /sbin/init showopts root 223 0.0 0.6 86816 50296 ? S 16:47 0:52 @usr/sbin/plymouthd --attach-to-session --pid-file /run/plymouth/pid root 318 0.0 0.1 525388 15212 ? Ss 16:47 0:00 /usr/lib/systemd/systemd-journald root 367 0.0 0.0 47892 2464 ? Ss 16:47 0:00 /usr/lib/systemd/systemd-udevd root 807 0.0 0.0 4256 852 ? Ss 16:48 0:00 /usr/sbin/acpid -n -f message+ 808 0.0 0.0 32972 2068 ? Ss 16:48 0:00 /bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation avahi 809 0.0 0.0 28100 1804 ? Ss 16:48 0:00 avahi-daemon: running [linux-423m.local] root 810 0.0 0.0 14892 1016 ? Ss 16:48 0:00 /usr/sbin/xinetd -stayalive -dontfork root 812 0.0 0.0 26396 2800 ? SLs 16:48 0:00 /usr/sbin/wickedd --debug all --foreground root 814 0.0 0.0 34780 1416 ? Ss 16:48 0:00 /sbin/rpcbind -w -f root 815 0.0 0.0 9368 3784 ? Ss 16:48 0:00 /usr/sbin/haveged -w 1024 -v 0 -F root 817 0.0 0.0 37116 1688 ? Ss 16:48 0:00 /usr/lib/systemd/systemd-logind root 824 0.0 0.0 265936 2460 ? Ssl 16:48 0:00 /usr/sbin/rsyslogd -n root 830 0.0 0.0 26264 2480 ? SLs 16:48 0:00 /usr/lib/wicked/bin/wickedd-auto4 --debug all --foreground root 831 0.0 0.0 26344 2504 ? SLs 16:48 0:00 /usr/lib/wicked/bin/wickedd-dhcp6 --debug all --foreground root 832 0.0 0.0 26312 2604 ? SLs 16:48 0:00 /usr/lib/wicked/bin/wickedd-dhcp4 --debug all --foreground root 866 0.0 0.0 27032 1600 ? Ss 16:48 0:00 /usr/sbin/cron -n root 869 0.0 0.1 360080 10812 ? Ssl 16:48 0:01 /usr/sbin/libvirtd --listen root 880 0.0 0.0 54824 2960 ? Ss 16:48 0:00 /usr/sbin/sshd -D root 1193 0.0 0.0 97264 4444 ? Ss 16:49 0:00 \_ sshd: root@pts/0 root 1222 0.0 0.0 23872 4544 pts/0 Ss 16:49 0:00 \_ -bash root 1281 0.0 0.0 20020 1144 pts/0 S+ 16:52 0:00 \_ screen root 1282 0.0 0.0 24068 5336 ? Ss 16:52 0:00 \_ SCREEN root 1283 0.0 0.0 24268 5092 pts/1 Ss 16:52 0:00 \_ /bin/bash root 1514 0.0 0.0 24316 1816 pts/1 R+ 17:06 0:00 \_ ps faxu root 895 0.0 0.0 23376 408 ? Ss 16:48 0:00 /usr/sbin/rpc.idmapd statd 915 0.0 0.0 17228 1332 ? Ss 16:48 0:00 /usr/sbin/rpc.statd --no-notify ntp 1010 0.0 0.0 33476 2148 ? Ss 16:48 0:00 /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -c /etc/ntp.conf root 1092 0.0 0.0 12668 876 tty1 Ss+ 16:48 0:00 /sbin/agetty --noclear tty1 root 1105 0.0 0.0 200920 3200 ? Sl 16:48 0:00 /usr/sbin/gdm root 1109 0.0 0.0 273784 3212 ? Sl 16:48 0:00 \_ /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0 root 1213 0.0 0.0 106628 3920 tty2 Ss+ 16:49 0:00 \_ /usr/bin/Xorg root 1196 0.0 0.0 25056 1556 ? Ss 16:49 0:00 /usr/lib/postfix/master postfix 1202 0.0 0.0 27124 1564 ? S 16:49 0:00 \_ pickup -l -t fifo -u postfix 1203 0.0 0.0 27172 1588 ? S 16:49 0:00 \_ qmgr -l -t fifo -u root 1219 0.0 0.0 267160 5496 ? Ssl 16:49 0:00 /usr/lib/accounts-daemon polkitd 1229 0.0 0.1 514160 11824 ? Ssl 16:49 0:00 /usr/lib/polkit-1/polkitd --no-debug root@linux-423m:~ # l -t /var/log/gdm/* -rw-r--r-- 1 root root 2199 Aug 20 16:49 /var/log/gdm/(null).log -rw-r--r-- 1 root root 42627 Aug 20 15:18 /var/log/gdm/:1.log -rw-r--r-- 1 root root 2451 Aug 20 14:53 /var/log/gdm/(null).log.1 -rw-r--r-- 1 root root 249 Aug 20 14:53 /var/log/gdm/:0.log -rw-r--r-- 1 root root 2191 Aug 20 11:25 /var/log/gdm/(null).log.2 -rw-r--r-- 1 root root 2191 Aug 20 09:56 /var/log/gdm/(null).log.3 -rw-r--r-- 1 root root 42296 Aug 19 18:06 /var/log/gdm/:1.log.1 -rw-r--r-- 1 root root 2447 Aug 19 18:03 /var/log/gdm/(null).log.4 -rw-r--r-- 1 root root 42242 Aug 19 15:32 /var/log/gdm/:0.log.1 -rw-r--r-- 1 root root 42623 Aug 19 15:20 /var/log/gdm/:0.log.2 -rw-r--r-- 1 root root 42626 Aug 19 14:58 /var/log/gdm/:1.log.2 -rw-r--r-- 1 root root 42623 Aug 16 17:40 /var/log/gdm/:0.log.3 -rw-r--r-- 1 root root 48466 Aug 16 16:54 /var/log/gdm/:0.log.4 -rw-r--r-- 1 root root 0 Jul 12 19:27 /var/log/gdm/:0-slave.log -rw-r--r-- 1 root root 138 Jan 25 2013 /var/log/gdm/:0-slave.log.1 -rw-r--r-- 1 root root 0 Nov 25 2012 /var/log/gdm/:0-slave.log.2 -rw-r--r-- 1 root root 0 Nov 25 2012 /var/log/gdm/:0-slave.log.3 -rw-r--r-- 1 root root 0 Nov 25 2012 /var/log/gdm/:0-slave.log.4 -rw-r--r-- 1 gdm gdm 28718 Aug 31 2012 /var/log/gdm/:0-greeter.log -rw-r--r-- 1 gdm gdm 21538 Aug 31 2012 /var/log/gdm/::1:1-greeter.log -rw-r--r-- 1 root root 176 Aug 31 2012 /var/log/gdm/::1:1-slave.log root@linux-423m:~ # -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] video= missing on https://en.opensuse.org/Linuxrc
by Felix Miata 21 Aug '13

21 Aug '13

Is there some other reference with more cmdline options for starting installation? KMS obeys valid video= on cmdline, but X ignores it. As you can see on http://fm.no-ip.com/Tmp/SUSE/Factory/xorg.0.log-t2240i845G-os131m4inst.txt I have video=1152x864@70 on 13.1m4+ installation cmdline, which the display is adjusted correctly WRT size and position to use, and which the framebuffer ttys are using. YaST via the modesetting driver, which apparently insists on using the EDID preferred mode, consistently if the connected gfxchip is any of several onboard Intel models puts the right side of the output offscreen, which means I never get to see the rightmost scrollbar in software selection, and the scrollbar on the summary screen, precisely the places where scrollbars most needed. The display is correctly adjusted for all modes I use on purpose, so I don't want to disturb the sleeping dog by adjusting it for a mode I don't even want used, likely stealing the little memory it has allocated for the modes I do use. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 12

[opensuse-factory] anyone tested rsh/rlogin? Do they work for anyone?
by Linda Walsh 21 Aug '13

21 Aug '13

I setup rsh/rlogin to work between my win box and linux box, as well as setting it up to allow rsh localhost more as a debug/proof thing than needing it, but it does the same thing. When I try to login to opensuse using rsh or rlogin, into rsh-0.17-726.1.x86_64 from factory, Using 2 clients from win: rsh and secureCRT (has a rsh option), or when I use rsh localhost. I get something equivalent to > rsh ishtar bash: linux/38400: No such file or directory rlogin: connection closed. --(or)--- > rsh ishtar bash: cygwin/38400: No such file or directory rlogin: connection closed. === seccrt does something similar... a ttyname/speed fed into bash as a command to be executed. That's rsh on SuSE localhost (so openfactory) and rsh on cygwin windows and securecrt -- all providing a param for a ttytype and nominal speed -- but in.rshd isn't swallowing it. I can't see how this would ever work -- tried with rlogin, tried with alternate username specs alternate commands... they all do the same. Ideas about where I should look in.rshd to fix this? Looks like last couple of patches /builders were: (Bcc'd) vcizek@suse(com), tiwai@suse(de), jengelh@medozas(de), anosek@suse(cz), werner@suse(de), crrodriguez@suse(de) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Well that was a complete waste of resources
by Basil Chupin 20 Aug '13

20 Aug '13

Downloaded Milestone 4 DVD, burnt it to disc, tried to update 13.1 Milestone 3 using this DVD but the whole effort was wasted because grub2-mkconfig does not function and the upgrade failed miserably. Same for a clean, new install of Milestone 4 - grub.cfg not generated and 13.1 won't boot. I caught one of several error messages during the upgrade from Milestone #3 and it was: "Can't use an undefined value as an ARRAY reference as /usr/lib/perl5/vendor_perl/5.18.0/Bootloader/Tools.pm line 431". (BTW, suddenly I cannot even use grub2-mkconfig in 12.3 - see my post in HELP named 'What is this nonsense?!') BC -- Using openSUSE 12.3, KDE 4.11.0 & kernel 3.10.5-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

Re: [opensuse-factory] KDE 4.11 in Tumbleweed testers wanted
by Ronan Chagas 20 Aug '13

20 Aug '13

Hi Greg, First, thanks for KDE 4.11. It works perfectly. The only problem I had in the update was related to some branding packages that was fixed by removing them. By the way, KDE 4.11 has an annoying bug that prevents the user to change some file type association (see bug https://bugs.kde.org/show_bug.cgi?id=321706). It seems that the patch attached to aforementioned bug solves this problem. Is it possible to build KDE for Tumbleweed with this patch or do we need to wait until the next official release? Best regards, Ronan 2013/8/20 Ronan Chagas <ronisbr(a)gmail.com>: > Hi Greg, > > First, thanks for KDE 4.11. It works perfectly. The only problem I had in > the update was related to some branding packages that was fixed by removing > them. > > By the way, KDE 4.11 has an annoying bug that prevents the user to change > some file type association (see bug > https://bugs.kde.org/show_bug.cgi?id=321706). > It seems that the patch attached to aforementioned bug solves this problem. > My question is if it is possible to build KDE for Tumbleweed with this patch > or if we need to wait until the next official release. > > Best regards, > Ronan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] ULONG_MAX=-1
by Marek Paśnikowski 20 Aug '13

20 Aug '13

Hello. I am learning C. For current exercise I need to use the ULONG_MAX from limits.h . I have the >>current milestone of OpenSUSE<< installed. In the code I have, with nothing else in between: unsigned long int var; var=ULONG_MAX; printf("%ld",var); When executed, the last statement of the three prints out "-1" . gcc -ansi -Wall gives no output at all for this revision of the program. Though I have hardware capable of virtualization, I don't have the space to install a VM. I suspect it's a bug in OpenSUSE (maybe even quite old), so can someone, please, do quick check on a stable release of OpenSUSE, what value does the ULONG_MAX take? When I examined /usr/lib64/gcc/x86_64-suse-linux/4.8/include-fixed/limits.h and /usr/include/linux/limits.h , for me it looks like a third header with __LONG_MAX__ is needed. I have had installed the devel_basis, devel_kernel and devel_C_C++ patterns. To make it easier, here's the code to check the value: #include<stdio.h> #include<limits.h> int main (void) { unsigned long int var; var=ULONG_MAX; printf("%ld",var); return 0; } -- Marek Paśnikowski -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] Fwd: [kbd] [ANNOUNCE] kbd-2.0.0 (stable)
by Dmitriy Perlow 19 Aug '13

19 Aug '13

Hi. I've updated kbd package at my home repo to the latest stable release: https://build.opensuse.org/package/show/home:DarkSS/kbd . I've been already testing it from the first development pre-release and I haven't got any issues with it. But there is a problem with dumpkeys rewritten: kbd-1.15.2-dumpkeys-C-opt.patch & kbd-1.15.2-dumpkeys-ppc.patch became broken and I failed to fix it. So I don't really know if I should submit anywhere. Let's discussion begin! Here it is a release announce: ------- ------- "Alexey Gladkov" "Linux console tools development discussion" <kbd(a)lists.altlinux.org> [kbd] [ANNOUNCE] kbd-2.0.0 (stable) Mon, 19 Aug 2013 09:36:43 +0300 kbd 2.0.0 Release Notes ========================== The kbd-2.0.0 is available at ftp://ftp.altlinux.org/pub/people/legion/kbd/ ftp://ftp.kernel.org/pub/linux/utils/kbd/ Git repository: git://git.altlinux.org/people/legion/packages/kbd.git git://git.kernel.org/pub/scm/linux/kernel/git/legion/kbd.git Feedback and bug reports, as always, are welcomed. Full changelog is too long. Changelog ---------- - Add bepo keyboard layout; - Add libkeymap; - The loadkeys and dumpkeys always use the libkeymap; -- Dmitriy DA(P).DarkneSS Perlow / Linux x64 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Query on pam_ldap, nss_ldap dependency
by Krishna Prasad 19 Aug '13

19 Aug '13

Hello, I am new to this group & subject. I have some query on pam_ldap, nss_ldap I downloaded the latest openpam-20120526, openldap-2.4.35, pam_ldap-186, nss_ldap-265 (from PADL.com) I want to enable PAM with authentication from remote LDAP server. I am not clear of minimum package requirement, full flow, configurations and whether some deamon is involved. >From README of pam_ldap-186: Here are some possible deployment scenarios: o pam_ldap with account information in /etc flat files, kept manually in sync with LDAP o pam_ldap with account information in LDAP, using nss_ldap o pam_ldap with account information in NIS, using ypldapd It looks like PAM is coupled with NSS. For “pam_ldap” to work with LDAP, nss_ldap is needed. On Ubuntu synaptic also, I found that both pam_ldap, nss_ldap packages have to be installed or removed together. I browsed the source code of pam_ldap and it was directly using openldap APIs. Did not find pam_ldap directly using nss_ldap APIs. I want PAM LDAP functionality, without NSS, unless nss_ldap is mandated by pam_ldap. Is pam_ldap using nss_ldap at runtime? Is some deamon like nslcd or nscd created by nss_ldap to serve NSS LDAP requests? Is the deamon needed? Can the PAM LDAP functionality work without nss_ldap or deamon nslcd? Also which package or deamon reads nsswitch.conf? Opennss? How is the flow from pam_ldap to nss_ldap? Is the below flow correct? openpam -> pam.d -> pam_ldap -> nss_ldap -> nslcd -> nsswitch.conf -> openldap -> ldap.conf Can we remove nss_ldap or kill nslcd and make pam_ldap work with openldap? Please let me know if some information is not clear. Thank you very much in advance, Krishna -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] I need help to apache2 going on 13.1 milestone 4 new install.
by doiggl＠velocitynet.com.au 19 Aug '13

19 Aug '13

Hello, I need help to apache2 going on 13.1 milestone 4 new install. What am I missing ? -- Thanks Glenn Rpms installed: Here is what I found so far: # rpm -qa | grep -i apache2 | sort apache2-2.4.6-3.2.x86_64 apache2-devel-2.4.6-3.2.x86_64 apache2-doc-2.4.6-3.2.noarch apache2-event-2.4.6-3.2.x86_64 apache2-example-pages-2.4.6-3.2.x86_64 apache2-icons-oxygen-1.0.0-13.2.noarch apache2-mod_apparmor-2.8.1-7.4.x86_64 apache2-mod_auth_ntlm_winbind-0.0.0.lorikeet_svn_682-190.4.x86_64 apache2-mod_dnssd-0.6-19.4.x86_64 apache2-mod_evasive-1.10.1-4.4.x86_64 apache2-mod_fcgid-2.3.7-1.3.x86_64 apache2-mod_jk-1.2.37-1.6.x86_64 apache2-mod_mono-2.10-13.4.x86_64 apache2-mod_nss-1.0.8-5.1.x86_64 apache2-mod_perl-2.0.8-2.1.x86_64 apache2-mod_perl-devel-2.0.8-2.1.x86_64 apache2-mod_php5-5.4.17-3.1.x86_64 apache2-mod_scgi-1.14-1.3.x86_64 apache2-mod_security2-2.6.7-3.4.x86_64 apache2-mod_tidy-0.5.5-224.4.x86_64 apache2-mod_wsgi-3.4-1.3.x86_64 apache2-prefork-2.4.6-3.2.x86_64 apache2-utils-2.4.6-3.2.x86_64 apache2-worker-2.4.6-3.2.x86_64 perl-Apache2-AuthCookieDBI-2.17-1.3.noarch rubygem-passenger-apache2-4.0.10-1.2.x86_64 # errors found: # systemctl start apache2.services Failed to issue method call: Unit apache2.services.service failed to load: No such file or directory. See system logs and 'systemctl status apache2.services.service' for details. # # systemctl status apache2.service apache2.service - The Apache Webserver Loaded: loaded (/usr/lib/systemd/system/apache2.service; disabled) Active: failed (Result: exit-code) since Wed 2013-08-14 16:15:47 EST; 38min ago Process: 2963 ExecStop=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k graceful-stop (code=exited, status=1/FAILURE) Process: 2943 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k start (code=exited, status=1/FAILURE) Main PID: 2943 (code=exited, status=1/FAILURE) CGroup: /system.slice/apache2.service Aug 14 16:15:47 test.site start_apache2[2943]: httpd2-prefork: Syntax error on line 180 of /etc/apache2/httpd.conf: Syntax error on line 102 of /etc/apache2/d... directory Aug 14 16:15:47 test.site systemd[1]: apache2.service: main process exited, code=exited, status=1/FAILURE Aug 14 16:15:47 test.site start_apache2[2963]: httpd2-prefork: Syntax error on line 180 of /etc/apache2/httpd.conf: Syntax error on line 102 of /etc/apache2/d... directory Aug 14 16:15:47 test.site systemd[1]: apache2.service: control process exited, code=exited status=1 Aug 14 16:15:47 test.site systemd[1]: Failed to start The Apache Webserver. Aug 14 16:15:47 test.site systemd[1]: Unit apache2.service entered failed state. # head -180 /etc/apache2/httpd.conf |tail -2 # Include /etc/apache2/default-server.conf ## # head -102 /etc/apache2/default-server.conf |tail -2 # Include /etc/apache2/conf.d/*.conf ## # ls /etc/apache2/conf.d/*.conf /etc/apache2/conf.d/manual.conf /etc/apache2/conf.d/mod_mono.conf /etc/apache2/conf.d/mod_security2.conf /etc/apache2/conf.d/mod_evasive.conf /etc/apache2/conf.d/mod_passenger.conf /etc/apache2/conf.d/nss.conf /etc/apache2/conf.d/mod_fcgid.conf /etc/apache2/conf.d/mod_perl.conf /etc/apache2/conf.d/php5.conf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 11

[opensuse-factory] Long live GitHub, clean up jour old mess!
by Michal Hrusecky 19 Aug '13

19 Aug '13

Hi everybody, As you probably all kinda know, most (all?) openSUSE relevant projects are hosted on GitHub in openSUSE project[1]. But unfortunately, we still have plenty of old projects at gitorious[2] and some projects even have sourceforge page/google code page. If you are maintainer of some repository, please take a look and try to take down old obsolete repos. Admins[3] can help you! If you are still using gitorious (or anything else), please consider moving your project to be together with the rest of the openSUSE folks. Why should you care? People will more easily find where your project lives! a) they actually can use it/contribute b) they don't think you are dead Thanks for cleaning up your stuff openSUSE Team [1] https://github.com/opensuse [2] http://gitorious.org/opensuse [3] admin(a)opensuse.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 10

[opensuse-factory] YaST module for configuration of a http server crashes
by Freek de Kruijf 19 Aug '13

19 Aug '13

When I start the YaST module for configuration of a http server, a first screen appears, but shortly after that it disappears. In /var/log/YaST/y2log I found: 2013-08-17 17:43:12 <1> eik131(5314) [Ruby] modules/HttpServer.rb:358 Mapping of IP addresses and network devices: $["127.0.0.1":"loopback", "192.168.178.35":"enp 1s0"] 2013-08-17 17:43:12 <3> eik131(5314) [Ruby] yast/wfm.rb:86 Client call failed with undefined method `WizardSequence1' for #<Yast::HttpServerClient:0x00000002c359b 8> and backtrace ["/usr/share/YaST2/include/http-server/wizards.rb:105:in `block in WizardSequence'", "/usr/lib64/ruby/vendor_ruby/2.0.0/yast/builtins.rb:535:in ` call'", "/usr/lib64/ruby/vendor_ruby/2.0.0/yast/builtins.rb:535:in `eval'", "/usr/share/YaST2/modules/Sequencer.rb:268:in `WS_run'", "/usr/share/YaST2/modules/Seq uencer.rb:340:in `Run'", "/usr/share/YaST2/include/http- server/wizards.rb:160:in `WizardSequence'", "/usr/share/YaST2/include/http- server/wizards.rb:170:in `block in HttpServerSequence'", "/usr/lib64/ruby/vendor_ruby/2.0.0/yast/builtins.rb:535:in `call'", "/usr/lib64/ruby/vendor_ruby/2.0.0/yast/builtins.rb:535:in `eval'", "/usr/share/YaST2/modules/Sequencer.rb:268:in `WS_run'", "/usr/share/YaST2/modules/Sequencer.rb:340:in `Run'", "/usr/share/YaST2/include/http-server/wizards.rb:18 8:in `HttpServerSequence'", "/usr/lib64/ruby/vendor_ruby/2.0.0/yast/fun_ref.rb:33:in `call'", "/usr/lib64/ruby/vendor_ruby/2.0.0/yast/fun_ref.rb:33:in `call'", "/ usr/share/YaST2/modules/CommandLine.rb:1590:in `Run'", "/usr/share/YaST2/clients/http-server.rb:214:in `main'", "/usr/share/YaST2/clients/http-server.rb:585:in `< top (required)>'", "/usr/lib64/ruby/vendor_ruby/2.0.0/yast/wfm.rb:84:in `eval'", "/usr/lib64/ruby/vendor_ruby/2.0.0/yast/wfm.rb:84:in `run_client'"] -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] openqa/factory lamp testing question
by doiggl＠velocitynet.com.au 19 Aug '13

19 Aug '13

Hello, I have a openqa/factory question:Perhaps for Bernhard. Can a test LAMP[1] be included in the openqa tests,to test the lamp software stack works with some software which uses all these components, see example see[2], The install output listed at[3] I have not tested the configuration settings yet as I have not been able to get apache2 part going yet. Thanks Glenn [1] definition Linux (operating system), Apache HTTP Server, MySQL (database software), and PHP, Perl or Python http://en.wikipedia.org/wiki/LAMP_%28software_bundle%29 [2] LAMP_setup and software setup - http://en.opensuse.org/SDB:LAMP_setup - http://en.opensuse.org/Cacti changed/updated instructions to suit newer version of cacti. zypper ar http://download.opensuse.org/repositories/server:/monitoring/openSUSE_Facto… server:monitoring zypper in cacti cacti-plugin-autom8 cacti-plugin-boost cacti-plugin-clog cacti-plugin-cycle cacti-plugin-discovery cacti-plugin-docs cacti-plugin-flowview cacti-plugin-hostinfo cacti-plugin-loginmod cacti-plugin-mactrack cacti-plugin-monitor cacti-plugin-npc cacti-plugin-ntop cacti-plugin-realtime cacti-plugin-routerconfigs cacti-plugin-settings cacti-plugin-ssl cacti-plugin-syslog cacti-plugin-thold cacti-plugin-tools cacti-plugin-update cacti-plugin-weathermap [3] install output Loading repository data.. Reading installed packages.. Resolving package dependencies.. The following NEW packages are going to be installed: cacti cacti-plugin-autom8 cacti-plugin-boost cacti-plugin-clog cacti-plugin-cycle cacti-plugin-discovery cacti-plugin-docs cacti-plugin-flowview cacti-plugin-hostinfo cacti-plugin-loginmod cacti-plugin-mactrack cacti-plugin-monitor cacti-plugin-npc cacti-plugin-ntop cacti-plugin-realtime cacti-plugin-routerconfigs cacti-plugin-settings cacti-plugin-ssl cacti-plugin-syslog cacti-plugin-thold cacti-plugin-tools cacti-plugin-update 22 new packages to install. Overall download size: 7.7 MiB. After the operation, additional 22.5 MiB will be used. Continue? [y/n/?] (y): Retrieving package cacti-0.8.8a-14.2.noarch Installing: cacti-plugin-boost-5.1-2.3 ............................................................[done] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 14