- openSUSE X.org

X freezes since upgrade to SuSe 9.0
by Stefan Neupert 16 Dec '03

16 Dec '03

Hi all, Since I upgraded to Suse 9 my X environment freezes regularly. Of course my first thought was that NVIDIA's driver might be faulty but discussions in their mailinglist show that it's restrictd to Suse 9 users. Obviously it's a problem to 9's Xfree version used. Is Suse aware of this? Stefan -- ''~`` ( o o ) +----------------------------.oooO--(_)--Oooo.+ | mailto:stefan.neupert@gmx.com | | Stefan Neupert +41 56 6229024 | | Dammweg 13 .oooO | | CH-5610 Wohlen ( ) Oooo. | +--------------------------------\ (---( )--+ \_) ) / (_/

1 0

X on Acer Aspire 1355LM
by Henning 15 Dec '03

15 Dec '03

hi there, a friend of mine got a problem with his acer aspire 1355LM Notebook.. after installation of suse 9, the x-server is not correctly recognized by the system. the fonts displayed are far to big as is the whole screen resolution.. think the system uses S3 ProSavage8 chipset with AGP support 64MB RAM on VIA ProSavage? KN400 Chipsatz + VT8235 *btw. didn´t manage to yet install the radeon driver on my comp. with nforce2 mainboard and suse linux 9, so i contacted suse support. i´ve been told that, installing onto this system just makes 2D use possible.. greets henning -- Henning Dey mailto:hdey-homeoffice@gmx.net

1 0

X crashes under 9.0
by Eric Pierce 15 Dec '03

15 Dec '03

Hey all, I'm having some problems with my new SuSE 9.0 network install. The install went fine. However, X will load up and freeze under a minute. I can swirl around the mouse for 10-20 seconds then everything freezes up. I'm unable to jump to other terminals at this point. The kernel, however, is still purring along. I can ssh into the machine. But killing X remotely doesn't give me back any control over said machine. I've tried quite a few things to figure this out, but to no avail. I deleted the XF86Config to get a fresh start and ran Sax2. Sax2 crashes in less than a minute after X is up. I also tried using my working XF86Config file from SuSE 8.2, but that didn't help any (ie., X still froze). I have 2 devices that are getting different IRQ assignments under SuSE 9.0 than what they got under 8.2. 8.2 had: 10: 2 XT-PIC ohci1394, Intel 82801BA-ICH2 11: 30 XT-PIC eth0 9.0 had: 5: 25 XT-PIC eth0, ohci1394 Everything is the same except for these 2 devices grabbing IRQ 5 (they had 10 & 11 under SuSE 8.2). I'm not so sure if this IRQ reassignment under 9.0 is really the problem anyhow. I popped out the firewire card (ohci1394 above) so eth0 could grab IRQ 5 all for itself, but X still dies. I don't see anywhere in BIOS to reassign these particular IRQs. Not knowing exactly what I'm doing, I also tried setpci -s 02:08.8 INTERRUPT_LINE=11 (11 was what SuSE 8.2 put eth0 at). That went in quietly. I also did setpci -s 02:08.8 INTERRUPT_PIN=11 which went in quietly too. I reassigned the firewire card as SuSE8.2 had it as well, but I saw no change when doing 'cat /proc/interrupts'. I don't see any errors in /var/log/XFree86.0.log either. A few Warnings, but nothing that looks detrimental. I also tried pci=noacpi at bootup. When I 'dmesg' it suggested that I try this. Still no go. My video card is a NVidia TNT2 32MB / AGP. It more or less worked find with SuSE 8.2. I'm truly stumped on this one. Anyone have any ideas? Anyway, thanks for reading! Eric Pierce __________________________________ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/

2 1

Suse 9.0 On Dell GX270
by IS Department 14 Dec '03

14 Dec '03

I want to install Suse 9.0 on a brand new Dell GX270. It has the integrated Intel 82865G network card. I have tried everything I can think of and still can only get 640X480 resloution. I really think it is an issue with the Intel card. Does anybody out there have any suggestions? Thanks.....

2 1

XServer fails after Yast Online Update
by Peter Niessen 13 Dec '03

13 Dec '03

Dear list, I've upgraded my SuSE 8.0 through the Yast2 YOU tool. Source was ftp.leo.org. Apart from nicely insatlling all the new safety patches, it also messed with my XFree86 System and I'm back to 80s style text mode. Checking the package versions (which contain xfree86 in their description) reveals: Package Version isax 1.3-343 (XFree 3.X stuff) mesa 4.0.1-74 sax 2.9-450 (XFree 3.X stuff) sax2 4.3-408 xdevel 4.2.0-64 xf86 4.2.0.64 xf86_3x 3.3.6-375 (XFree 3.X stuff) xf86tools 0.1-221 xfntscl 4.2.0-64 xloader 4.2.0-64 xman 4.2.0-64 xmods_3x 3.3.6-375 (XFree 3.X stuff) xmodules 4.2.0-64 (Weird enough, Index of ftp://ftp.leo.org/pub/suse/i386/8.0/suse/x1 shows xf86 version numbers 4.2.0-107) My XF86Config and the log file from the attempted server startup is found at http://www-zeuthen.desy.de/~niessen/XFree86.0.log http://www-zeuthen.desy.de/~niessen/XF86Config I'm running this on an ACER (TM) Travelmate 260 with an Intel (TM) i830M chipset. In Yast2 itself, the system detects Current Settings: 1024x768, 16 bit / 65536 colo(u)rs Refresh rate: 60 Hz 3D acceleration disabled Monitor: LCD XGA 1024X768@60HZ: ,,Probe Hardware'' actually switches into graphics mode, and I see some remains of past sessions, but the it comes back and says it could not write the configuration. Grateful for any clues what's going on. Cheers, Peter. Peter Nießen (Peter Niessen for special character challenged displays) Bartol Research Institute University of Delaware Newark, DE 19716-4793 U.S. of America Tel (+1)302/831-8700 Fax (+1)302/831-1843 e-mail niessen(a)ifh.de www http://www.ifh.de/~niessen /"\ ASCII ribbon campaign \ / --------------------- X against HTML mail / \ and postings pgp public key at http://www.ifh.de/www_users/amanda/niessen/www/pgp_pubkey.asc

1 1

Video card and monitor frequency problems
by Carlos Vieira 12 Dec '03

12 Dec '03

Hi, I have installed SuSE 9.0, but in the start of the installation i have an option to select the resolution and i selected 1280x1024, and after the installation of all the system without any problems, when starting X, i stay with no image in the monitor. Just get the message from monitor (not linux) saying that the frequency is too high for the monitor. I understand that! but when i try to change the resolution and frequency with YaST2 or SaX, i have the same problem... when i click the button to allow modifications of that kind the monitor stays black and saying that frequency message. How can i modify frequency and resolution without having this problem? Any ideas Thanks in advance Carlos Vieira

1 0

Could not find XOpenDisplay in -lX11
by Patrick Heffernan 11 Dec '03

11 Dec '03

Hello all Hopefully someone can help me here. I'm running SuSE 8.2 with Xfree 4.3.0-111 (development packages installed) I'm trying to compile fluxbox-0.9.6 window manager and when I run configure it stops at the following - checking for XOpenDisplay in -lX11... no configure: error: Could not find XOpenDisplay in -lX11. Does anyone know how to fix this? Thankyou -- Patrick Heffernan Maryvale Computer Service Phone: +61 7 4661 9006 ---------------------------------------------------------------- "Is" is the verb for when you don't want a verb.

2 2

ATI Driver
by Frédéric Poulet 08 Dec '03

08 Dec '03

Hi, I installed suse's driver for my radeon 8500, no problem. But i don't use TV-out, why ? but i use fglrxconfig. I have radeon 8500 and SuSE 9.0. ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com

3 3

Radeon 8500 + Tv out
by Frédéric Poulet 06 Dec '03

06 Dec '03

Hi, When i install ATI driver, i have errors : # rpm -i --force fglrx-glc22-4.3.0-3.2.8.i586.rpm *** Trying to install a precompiled kernel module. *** WARNING *** Tailored kernel module for fglrx not present in your system. You must go to /lib/modules/fglrx/build_mod subdir and execute './make.sh' to build a fully customed kernel module. Afterwards go to /lib/modules/fglrx and run './make_install.sh' in order to install the module into your kernel's module repository. (see readme.txt for more details.) As of now you can still run your XServer in 2D, but hardware acclerated OpenGL will not work and 2D graphics will lack performance. failed. *** Found kernel module build environment, generating kernel module now. ATI module generator V 2.0 ========================== initializing... Error: XFree86 drm includes at /lib/modules/2.4.21-144-smp4G/build/include/../drivers/char/drm do not fit this driver. This driver is designed to only work with X4.1.0 or higher. You can match this by getting Linux kernel 2.4.8 or higher. *** WARNING *** Tailored kernel module for fglrx not present in your system. You must go to /lib/modules/fglrx/build_mod subdir and execute './make.sh' to build a fully customed kernel module. Afterwards go to /lib/modules/fglrx and run './make_install.sh' in order to install the module into your kernel's module repository. (see readme.txt for more details.) As of now you can still run your XServer in 2D, but hardware acclerated OpenGL will not work and 2D graphics will lack performance. failed. /sbin/ldconfig: File /usr/X11R6/lib/FGL.renamed.libGL.so.1.2 is too small, not checked. Installed: qt3 (gcc 3.2) based control panel application === ATI display drivers successfully installed please run 'fglrxconfig' now === What's the problem ?? ____________________________________________________________________________________ Do You Yahoo!? -- Avec Yahoo! soyez au coeur de la récolte de dons pour le Téléthon. http://fr.promotions.yahoo.com/caritatif/

1 0

3D support for ATI 9600 with fglrx and DRI doesn't work
by Ricardo Olympio de Freitas 06 Dec '03

06 Dec '03

Hi, I have ATI RADEON 9600 with 256MB runing on Epox 8RDA3+ motherboard (NForce2) and SuSe 9.0. I downloaded fglrx (3.2.8) from suse's ftp and follow all instrutions on README. Including put "Load 'dri'" on XFree86 file. But 3D doesn't work. Whem I run "fgl_glxgears" the message "Error: couldn't get fbconfig" shows on screen. And whem I run any 3D program, like TUXRACER a warning message shows on screen: "3D hardware support not available No 3D graphics card available or 3D support not configured yet..." What I have to do ???????? Someone can help me, please ?????? Atenciosamente, Ricardo Olympio de Freitas Minas Gerais - BRAZIL olympio(a)ig.com.br Clube Atletico Mineiro is the greatest soccer team of world. _________________________________________________________ Quer ter um Big Mail? Clique aqui: http://registro.ig.com.br/bigmail/

1 0