May 2014 - openSUSE X.org - openSUSE Mailing Lists

[opensuse-xorg] 潍坊华宏钢结构工程有限公司
by 广杰不锈钢制品有限公司 29 May '14

29 May '14

收到附件，查看附件点预览

1 0

Re: [opensuse-xorg] dead i810 upstream problem?
by Egbert Eich 15 May '14

15 May '14

walter harms writes: > mmh, > if i remember correctly my notebook has a gfx chip of the 810 family (845?). > I works fine and i hesitate to change that with an (very long overdue update). > i845GM is more likely. I don't recall exactly since it's so long ago, but I don't think there was a mobile variant with the i810 gfx core. i845 is two generations newer than the i810 - the graphics core has changed a lot. There is KMS support for i845 - not so for i810. i845GM hardware was a lot faster already. Heck, my phone has a faster processor than the i810 box I had - and it's a lot quieter as well and consumes lot less power. Cheers, Egbert. > re, > wh > > > Am 15.05.2014 00:14, schrieb Egbert Eich: > > Felix Miata writes: > > > X won't run on xf86-video-intel-2.99.911.1-123.9 on i810E on either Factory with > > > X11:XOrg or Mageia's Cauldron. Is this a known problem upstream? I searched > > > bugzilla.kernel.org and bugs.freedesktop.org without seeing anything on 810 point. Is > > > > Maybe because you are the last one who possesses this hardware? > > There is very little we can do to help you here. All our i810 > > hardware we owned has died meanwhile. You may open at ticket on > > bugs.freedesktop.org and pester Intel about this. > > Your mileage may vary though as Intel may not have this hardware > > available for bug verification either. > > I'm afraid that once you own hardware that's not mainstream any > > more you are pretty much on your own - and you are most likely > > the only one who still cares about i810. > > So why don't you investigate this yourself and develop a fix? > > I'd be happy to review this - sorry I won't be able to test it, > > though. > > Otherwise - since you verified that the driver is broken and > > I'm positive that nobody else (except you?) will care for it > > any more - I should be able to safely drop it from openSUSE. > > > > > there a more general failure on other gfxchips I just haven't run into yet? Is the > > > 810 supposed to be running a different driver than intel post-13.1/1.14.x? > > > > Sorry, I cannot answer this. It's too long since I've looked at > > this driver. > > > > Cheers, > > Egbert. > -- > To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse-xorg+owner(a)opensuse.org -- Egbert Eich (Res. & Dev.) SUSE LINUX Products GmbH SUSE Labs KMS / DRM / X Window System Development Tel: +49 911-740 53 0 http://www.suse.de ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-xorg+owner(a)opensuse.org

2 1

Re: [opensuse-xorg] dead i810 upstream problem?
by Egbert Eich 15 May '14

15 May '14

Felix Miata writes: > X won't run on xf86-video-intel-2.99.911.1-123.9 on i810E on either Factory with > X11:XOrg or Mageia's Cauldron. Is this a known problem upstream? I searched > bugzilla.kernel.org and bugs.freedesktop.org without seeing anything on 810 point. Is Maybe because you are the last one who possesses this hardware? There is very little we can do to help you here. All our i810 hardware we owned has died meanwhile. You may open at ticket on bugs.freedesktop.org and pester Intel about this. Your mileage may vary though as Intel may not have this hardware available for bug verification either. I'm afraid that once you own hardware that's not mainstream any more you are pretty much on your own - and you are most likely the only one who still cares about i810. So why don't you investigate this yourself and develop a fix? I'd be happy to review this - sorry I won't be able to test it, though. Otherwise - since you verified that the driver is broken and I'm positive that nobody else (except you?) will care for it any more - I should be able to safely drop it from openSUSE. > there a more general failure on other gfxchips I just haven't run into yet? Is the > 810 supposed to be running a different driver than intel post-13.1/1.14.x? Sorry, I cannot answer this. It's too long since I've looked at this driver. Cheers, Egbert. -- Egbert Eich (Res. & Dev.) SUSE LINUX Products GmbH SUSE Labs KMS / DRM / X Window System Development Tel: +49 911-740 53 0 http://www.suse.de ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-xorg+owner(a)opensuse.org

3 4

[opensuse-xorg] dead i810 upstream problem?
by Felix Miata 14 May '14

14 May '14

X won't run on xf86-video-intel-2.99.911.1-123.9 on i810E on either Factory with X11:XOrg or Mageia's Cauldron. Is this a known problem upstream? I searched bugzilla.kernel.org and bugs.freedesktop.org without seeing anything on 810 point. Is there a more general failure on other gfxchips I just haven't run into yet? Is the 810 supposed to be running a different driver than intel post-13.1/1.14.x? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-xorg+owner(a)opensuse.org

1 0

[opensuse-xorg] making multihead and/or panning work; forcing DPI
by Felix Miata 13 May '14

13 May '14

"I've never been able to get dual screen working." "I haven't been able to get panning/virtual working since 11.4 or 12.1." "How can I force DPI/make everything on the desktop bigger?" Several such combinations work here in 12.3 & up. Xorg.conf still works to set them up if no panning or scaling are required, but since I often do, I often put http://fm.no-ip.com/Share/setup in /etc/X11/xinit/xinitrc.d/setup as 0755 with whichever line I want used uncommented for xrandr to perform the configuration as X loads instead of trying to use DE tools after the fact. Whether x is actually needed I never get around to testing. Same principles apply to setup multihead. http://fm.no-ip.com/Share/ contains several xorg.conf files that work to configure multihead with FOSS drivers for Intel, ATI & NVidia gfxchips. Latest KDE version users since mid-summer of 2013 have had krandr replaced with kscreen, which is supposed to have made multihead easy to setup without touching files in /etc/X11/. That's not something I've tried, since I'm happy to setup X globally in /etc/X11/ and disable kscreen in users' ~/.kde4/share/config/kdedrc with: [Module-kscreen] autoload=false Forcing DPI globally works same as always through xorg.conf, but may be overridden by the DE, either optionally (e.g. KDE) or not (Gnome3?). -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-xorg+owner(a)opensuse.org

1 0