openSUSE X.org April 2005

xorg@lists.opensuse.org

17 participants
15 discussions

by Dieter Jurzitza

Dear listmembers, using a "logitech optical mouse" at the PS/2 port of my computer (Tyan Tiger 2460 SMP), the mouse wheel does not work any more with SuSE 9.3 (but *did* perfectly with the identical mouse at the same computer using SuSE 9.2 + xorg 6.8.2). (I only upgraded the software and did not change any hardware!). Reconfiguration using sax2 -r doesn't help. The mouse wheel is disfunctional within sax2; I do not know whether this is a X issue or a sax2 issue. Moving this mouse to the USB-connector (it is usually connected to the PS/2 port via an adapter) the wheel is functional. summarizing: mouse (PS2)+SuSE9.3 -> no mouse wheel mouse (PS2)+SuSE9.2+xorg 6.8.2 -> mouse wheel functional mouse (USB+SuSE9.3) -> mouse wheel functional however, I need the mouse to run on the PS2/port because I need both USB-ports for other purposes. Are there any options to fix this? Modifying the settings in /etc/X11/xorg.conf has no impact. Many thanks for any advice, take care Dieter Jurzitza -- ----------------------------------------------------------- | \ /\_/\ | | ~x~ |/-----\ / \ /- \_/ ^^__ _ / _ ____ / <��__ \- \_/ | |/ | | || || _| _| _| _| if you really want to see the pictures above - use some font with constant spacing like courier! :-) -----------------------------------------------------------

16 years, 5 months

Re: [suse-xfree86] video out with suse 9.3

by walter harms

hi list, attached is my xorg.conf this one works fine with virtual. removing it (using the same line as in 24 e.g. causes the external output to the beamer to use higher not useable resolution) removing 1280x1024 from the list works also (off cause) but the beamer is actualy supporting this resolution but i did not get X11 to use a suitable frequence. The most simply way imho is to add an option to configure the external-out to some value, effectivly using it like a second card. (multihead with clone if you like). SubSection "Display" Depth 16 Modes "1024x768" "1280x1024" "800x600" "768x576" "640x480" Virtual 1024 768 EndSubSection

16 years, 6 months

video out with suse 9.3

by walter harms

hi list, I have installed the new SuSE 9.3 on a dell latitude 840c. I can use the external beamer upto a resolution of 1024x768. The display can more but the external video gets initialised with the max resolution of the display, causing havoc. When i have any higher resolution that 1024x768 in the list it does not work. strangely when i switch size there is no change on the beamer display. i guess they use the virtual display instead of the real one. is this a configuration option ? any hints ? re, walter

16 years, 6 months

Re: [suse-xfree86] VNC issues on suse 9.2

by Jake Sallee

On Thu, April 14, 2005 2:43 pm, Stephen Boddy said: > Complete shot in the dark, but have you tried setting > DISPLAYMANAGER_REMOTE_ACCESS to yes in the YaST /etc/sysconfig module? > -- > Steve Boddy Thanks for the tip. I looked at that and it was set to "no". I've enabled that but unfortunately there is no change. It doesn't matter if I use VNC, VNC java client, or FreeNX. All of them do not work. I still get a black screen with an X cursor. So this tells me it's an issue with kdm or xorg. i wonder what would be stopping X or kdm from displaying remotely..... verified virus free by Usermail.com

16 years, 6 months

VNC issues on suse 9.2

by Jake Sallee

I'm having a problem running VNC on SuSE 9.2 with xorg 6.8.2 and KDE 3.4. I've tried enabling VNC through Yast and sax2. VNC is running, and I can connect to the server, but kdm login screen never shows up. I get the X cursor but all that is ever displayed is the grey background before kdm. Eventually the session will disconnect. After successful authentication over the java web gui, vnc does the same thing, grey screen, no kdm. I've tried recompiling xorg 6.8.2 from source but this hasn't cleared up the problem. I'm at a loss here as this is a fresh install. Any ideas? Thank you. Jake verified virus free by Usermail.com

16 years, 6 months

Re: [suse-xfree86] VNC issues on suse 9.2

by Jake Sallee

On Wednesday 13 April 2005 08:56, Jack Schneider wrote: > Jake Sallee wrote: > >On Monday 11 April 2005 15:59, Sami A. Hassanein wrote: > >>On Monday 11 April 2005 18:45, Jake Sallee wrote: > >>>I'm having a problem running VNC on SuSE 9.2 with xorg 6.8.2 and KDE > >>> 3.4. > >> > >>try FreeNX, it works much faster and just better. > >> > >> > >>-- > >>Regards, > >>Sami > > > >Ok. I've tried Free NX now, i get the same thing. I never receive a > > login screen. Just a grey screen with an X cursor. Any tips would be > > appreciated. > > Hi, > > I have the same problem with managing my Comm server. SSH works fine for > console mode but cannot get the login screen on VNC, just the window with a > crosshatched pattern.. > > Let me know if you find an answer.. > > Jack Not a problem. You should send this to the list, though. -- Jake Sallee spark(a)breathdedeeply.com www.breathedeeply.com Registered Linux User #358012 http://counter.li.org Novell SuSE Linux Pro 9.2 http://www.suse.com K Desktop Environment 3.4 http://www.kde.org Linux Kernel 2.6.8 http://www.kernel.org Firefox 1.0.2 Web Browser http://www.getfirefox.com

16 years, 6 months

Re: [suse-xfree86] ATI Driver (fglrx) won't direct render

by Markus Kossmann

Am Dienstag, 12. April 2005 16:18 schrieb aga: > On Tuesday 12 April 2005 03:34, Markus Kossmann wrote: > > Am Dienstag, 12. April 2005 01:45 schrieb aga: > > > I've spent a lot of time trying to get direct rendering enabled, but > > > configuration keeps failing with (from sax.log):- > > > (II) fglrx(0): doing DRIScreenInit > > > drmOpenDevice: node name is /dev/dri/card0 > > > drmOpenDevice: open result is -1, (Unknown error 999) > > > drmOpenDevice: open result is -1, (Unknown error 999) > > > drmOpenDevice: Open failed > > > drmOpenDevice: node name is /dev/dri/card0 > > > drmOpenDevice: open result is -1, (Unknown error 999) > > > drmOpenDevice: open result is -1, (Unknown error 999) > > > drmOpenDevice: Open failed > > > FATAL: Error inserting fglrx > > > (/lib/modules/2.6.8-24.14-default/kernel/drivers/char/drm/fglrx.ko): No > > > such device > > > [drm] failed to load kernel module "fglrx" > > > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > You probably need to (re)compile the kernel module from sources to get a > > matching version for your updated kernel version. > > Hi Marcus > > Thanks. If I've downloaded the kernel and the matching kernel-source, I > was assuming that I didn't need to recompile. Am I wrong here, then? > The error message says that the kernel-module fglrx couldn't be loaded. Can you load it manually with modprobe ? Which version of the fglrx driver are you running ? If you did update fglrx to a newer version than shipped with SuSE-9.2 you will have to recompile the kernel module coming as part of that driver from sources everytime you update the kernel, because SuSE can ship only the precompiled kernel module matching to the shipped version of the driver in the SuSE release.

16 years, 6 months

ATI Driver (fglrx) won't direct render

by aga

I've spent a lot of time trying to get direct rendering enabled, but configuration keeps failing with (from sax.log):- (II) fglrx(0): doing DRIScreenInit drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: Open failed FATAL: Error inserting fglrx (/lib/modules/2.6.8-24.14-default/kernel/drivers/char/drm/fglrx.ko): No such device [drm] failed to load kernel module "fglrx" >>>>>>>>>>>>>>>>>>>>>>> Here's the XF86Config (apologies for its size) # /.../ # SaX generated X11 config file # Created on: 2005-04-11T00:15:50+0100. # # Version: 4.8 # Contact: Marcus Schaefer <sax(a)suse.de>, 2002 # # Automatically generated by [SaX2] (4.8) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" <snip other fonts> FontPath "/opt/kde3/share/fonts" InputDevices "/dev/ttyS0" InputDevices "/dev/ttyS1" InputDevices "/dev/ttyS2" InputDevices "/dev/ttyS3" InputDevices "/dev/ttyS4" InputDevices "/dev/ttyS5" InputDevices "/dev/ttyS6" InputDevices "/dev/ttyS7" InputDevices "/dev/ttyS8" InputDevices "/dev/psaux" InputDevices "/dev/logibm" InputDevices "/dev/sunmouse" InputDevices "/dev/atibm" InputDevices "/dev/amigamouse" InputDevices "/dev/atarimouse" InputDevices "/dev/inportbm" InputDevices "/dev/gpmdata" InputDevices "/dev/mouse" InputDevices "/dev/usbmouse" InputDevices "/dev/adbmouse" InputDevices "/dev/input/mice" InputDevices "/dev/input/event0" InputDevices "/dev/pointer0" InputDevices "/dev/pointer1" InputDevices "/dev/pointer2" InputDevices "/dev/pointer3" EndSection Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "/usr/X11R6/lib/modules/extensions/libglx.a" Load "v4l" Load "/usr/X11R6/lib/modules/extensions/libdri.a" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "gb" Option "XkbModel" "pc105" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "7" Option "Device" "/dev/input/mice" Option "Name" "ImExPS/2 Generic Explorer Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" DisplaySize 340 270 HorizSync 30-82 Identifier "Monitor[0]" ModelName "VIEWSONIC VX715" Option "DPMS" VendorName "VSC" VertRefresh 43-85 UseModes "Modes[0]" EndSection Section "Monitor" Identifier "Monitor[1]" VendorName "Unknown" UseModes "Modes[1]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x1024" 134.72 1280 1368 1504 1728 1024 1025 1028 1068 Modeline "1280x1024" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 Modeline "1152x864" 102.08 1152 1224 1352 1552 864 865 868 901 Modeline "1152x864" 116.71 1152 1224 1352 1552 864 865 868 906 Modeline "1024x768" 79.52 1024 1080 1192 1360 768 769 772 801 Modeline "1024x768" 92.05 1024 1088 1200 1376 768 769 772 806 Modeline "800x600" 47.53 800 840 920 1040 600 601 604 626 Modeline "800x600" 55.22 800 840 928 1056 600 601 604 630 Modeline "640x480" 29.84 640 664 728 816 480 481 484 501 Modeline "640x480" 34.80 640 672 736 832 480 481 484 504 EndSection Section "Modes" Identifier "Modes[1]" EndSection Section "Device" BoardName "X800" BusID "PCI:5:00:0" ChipID 0x5d57 Driver "fglrx" Identifier "Device[0]" Option "hwcursor" "off" Option "UseInternalAGPGART" "no" Screen 0 VendorName "ATI" EndSection Section "Device" BoardName "X800" BusID "PCI:5:00:0" Driver "fglrx" Identifier "Device[1]" Screen 1 VendorName "ATI" EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Screen" DefaultDepth 24 Device "Device[1]" Identifier "Screen[1]" Monitor "Monitor[1]" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Screen "Screen[0]" Screen "Screen[1]" RightOf "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection The board is ATI X800 PCIE (pro) which wasn't recognised so I've forced the ChipID, which allows it to be used. Mother board is MSI K8N Neo4 with Nvidia nforce 4 chipset. I'm presently only using 32-bit. I thought I'd get that working before trying 64-bit, and haven't got that far. Suse 9.2, X11 6.8.2, also tried 6.8.1-15.5, now on 6.8.1-15.1. fglrx 8.12.10, before that 8.10.19, all without any apparent change in symptoms. I'm confused about agp and agpgart. I've tried both internal and external, but am not sure about which external I should try. As it's Nvidia chipset, should it be that? I can't see any mention of nforce 4, only nforce 2. Can anyone help, please? I'm a newbie here. Allan

16 years, 6 months

Howto build the km_drm-6.8.2-0.1.i586.rpm @ kernel 2.6.11 / SuSE 9.2

by Dieter Jurzitza

Dear listmembers, trying to build the drm - modules after having installed kernel 2.6.11 on SuSE 9.2 always fails for me, though using the commands that used to work with the kernel 2.6.8: script in use: ******************************************************************************* #!/bin/sh pushd /usr/src/linux; rm -f .config; make cloneconfig; make prepare-all; popd pushd /usr/src/kernel-modules/drm KERNEL_SOURCE=/usr/src/linux make modules KERNEL_SOURCE=/usr/src/linux make install popd ******************************************************************************* I always get compiler errors: ********* make[1]: Entering directory `/usr/src/linux-2.6.11.3-2' CC [M] /usr/src/kernel-modules/drm/i810_drv.o In file included from /usr/src/kernel-modules/drm/i810_drv.c:40: /usr/src/kernel-modules/drm/drm_agpsupport.h:47: error: parse error before '*' token /usr/src/kernel-modules/drm/drm_agpsupport.h:47: warning: type defaults to `int' in declaration of `drm_agp' /usr/src/kernel-modules/drm/drm_agpsupport.h:47: warning: data definition has no type or storage class /usr/src/kernel-modules/drm/drm_agpsupport.h: In function `i810_agp_info': /usr/src/kernel-modules/drm/drm_agpsupport.h:69: error: request for member `copy_info' in something not a structure or union /usr/src/kernel-modules/drm/drm_agpsupport.h: In function `i810_agp_acquire': /usr/src/kernel-modules/drm/drm_agpsupport.h:111: error: request for member `acquire' in something not a structure or union /usr/src/kernel-modules/drm/drm_agpsupport.h:117: error: request for member `acquire' in something not a structure or union ****** and so on and so forth; anyone having an idea how this could be solved? Many thanks for helping, take care Dieter Jurzitza -- ----------------------------------------------------------- | \ /\_/\ | | ~x~ |/-----\ / \ /- \_/ ^^__ _ / _ ____ / <°°__ \- \_/ | |/ | | || || _| _| _| _| if you really want to see the pictures above - use some font with constant spacing like courier! :-) -----------------------------------------------------------

16 years, 6 months

vncviewer cannot connect to server after the sever reset

by zhen zhang

Hello guys, I had an IBM machine running SuSe 8.1 and tried to connect to a vnc server through the command: vncviewer xxx.xxx.xxx.xxx. It can work at the first time. But as soon as the server reset and I ran the commmand again, nothing happens. the viewer cannot connect anymore. the message I always got is like: "authentication suceessfully. the server closed connection" Got any idea why this happens and how to fix it? Thanks in advance. Eric

16 years, 6 months

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

openSUSE X.org April 2005