June 2008 - openSUSE X.org - openSUSE Mailing Lists

[opensuse-xorg] xinerama not working with 10.3/64-bit
by vinai 22 Jun '08

22 Jun '08

Hi all, I'm new to this list, though I've run Suse and opensuse for a couple of years now, and linux for much longer than that. I manage a small cluster of machines that ran a mix of suse 9.1 to 10.1. I finally was able to successfully bring them all up to x86-64 opensuse 10.3. The last machine I worked on was originally a 32-bit installation. The CPU was upgraded to 64 bit. Up till this point, I was able to drive a pair of viewsonis vp 181s with a matrox 450 with Xinerama in "clone off" mode, to esssentially give an extended desktop. With 10.3, I am unable to re-create that setup. I am stuck with X in clone/mirror mode. Below are the relevant parts of the xorg.conf. Am I missing something, or should I file a bug report ? Thanks much folks. cheers vinai ----- xorg.conf ----- ... Section "Modes" Identifier "Modes[0]" Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 EndSection Section "Monitor" DisplaySize 357 268 HorizSync 30-95 Identifier "Monitor[0]" ModelName "VIEWSONIC VP181" Option "DPMS" VendorName "VSC" VertRefresh 43-87 UseModes "Modes[0]" EndSection Section "Monitor" DisplaySize 357 268 HorizSync 30-95 Identifier "Monitor[1]" ModelName "VIEWSONIC VP181" Option "DPMS" VendorName "VSC" VertRefresh 43-87 UseModes "Modes[0]" EndSection Section "Device" BoardName "Matrox Graphics, Inc. MGA G400 AGP 0" BusID "PCI:1:0:0" Driver "mga" Identifier "Device[0]" Screen 0 EndSection Section "Device" BoardName "Matrox Graphics, Inc. MGA G400 AGP 1" BusID "PCI:1:0:0" Driver "mga" Identifier "Device[1]" Screen 1 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection Device "Device[1]" Identifier "Screen[1]" Monitor "Monitor[1]" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "on" Screen "Screen[0]" Screen "Screen[1]" RightOf "Screen[0]" EndSection Section "ServerFlags" Option "Xinerama" "true" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" EndSection -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-xorg+help(a)opensuse.org

2 2

[opensuse-xorg] wrong modelines for DELL2407WFPHC
by walter harms 20 Jun '08

20 Jun '08

hi list, i had the opportunity to test the new 11.0 on a system and found that xorg still gets wrong modelines for the DELL2407WFPHC TTF. please note the odd place for "1920x1200" only the last line seems to work properly. the problem is annoying because you are left with non working display after install. re wh Section "Modes" Identifier "Modes[0]" # Modeline "1920x1200" 151.63 1920 2032 2240 2560 1200 1201 1204 1234 # Modeline "1920x1200" 119.75 1920 1968 2000 2080 1200 1203 1209 1227 +HSync -Vsync Modeline "1600x1200" 152.67 1600 1704 1880 2160 1200 1201 1204 1240 Modeline "1600x1200" 121.25 1600 1648 1680 1760 1200 1203 1207 1232 +HSync -Vsync Modeline "1280x1024" 141.82 1280 1376 1512 1744 1024 1025 1028 1070 Modeline "1280x1024" 130.17 1280 1368 1504 1728 1024 1025 1028 1066 Modeline "1280x1024" 120.01 1280 1368 1504 1728 1024 1025 1028 1063 Modeline "1280x1024" 114.50 1280 1328 1360 1440 1024 1027 1034 1061 +HSync -Vsync Modeline "1280x1024" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 Modeline "1152x864" 106.51 1152 1224 1352 1552 864 865 868 903 Modeline "1152x864" 97.69 1152 1224 1344 1536 864 865 868 900 Modeline "1152x864" 90.02 1152 1224 1344 1536 864 865 868 897 Modeline "1152x864" 88.00 1152 1200 1232 1312 864 867 871 895 +HSync -Vsync Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 Modeline "1024x768" 83.00 1024 1080 1192 1360 768 769 772 803 Modeline "1024x768" 76.89 1024 1080 1192 1360 768 769 772 800 Modeline "1024x768" 70.50 1024 1072 1104 1184 768 771 775 796 +HSync -Vsync Modeline "1024x768" 70.07 1024 1080 1184 1344 768 769 772 798 Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795 Modeline "800x600" 50.32 800 840 928 1056 600 601 604 627 Modeline "800x600" 45.93 800 840 920 1040 600 601 604 625 Modeline "800x600" 44.75 800 848 880 960 600 603 607 622 +HSync -Vsync Modeline "800x600" 42.33 800 840 920 1040 600 601 604 623 Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622 Modeline "1920x1200" 154 1920 1968 2000 2080 1200 1203 1209 1235 -hsync +vsync EndSection -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-xorg+help(a)opensuse.org

2 2

[opensuse-xorg] Latest ATI graphics driver - to whom it might concern ...
by Dieter Jurzitza 18 Jun '08

18 Jun '08

Dear listmembers, after about half a year of waiting I can state that they've arrived where I hoped them to arrive for quite a while now: the latest fglrx-driver supports YUY2! So, tvtime is back to functionality again. So, apart from the fact that yast (opensuse 10.3) writes parameters into xorg.conf that make my monitor fail (too high resolution for Elsa Ecomo 750, 1900x1600 or something similar, the largest acceptable resolution is 1600x1200) everything seems to be up and running now. Only to let you know! Thanks ATI and everybody who has been spending lots of time with this driver! Take care Dieter Jurzitza -- ----------------------------------------------------------- | \ /\_/\ | | ~x~ |/-----\ / \ /- \_/ ^^__ _ / _ ____ / <°°__ \- \_/ | |/ | | || || _| _| _| _| if you really want to see the pictures above - use some font with constant spacing like courier! :-) ----------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-xorg+help(a)opensuse.org

1 0

[opensuse-xorg] motif problem ?
by walter harms 12 Jun '08

12 Jun '08

hi list, i am not sure where the problem originates (Xorg or Motif) but these are the symtomes: Programms using Motif on 10.3 (OpenMotif 2.3.0-23) are terrible slow because they refresh very often (you can see the lines drawn) using OpenMotif 2.2.3-11 (OS 9.3) solves the problem. is anyone aware of this problem ? re, wh -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-xorg+help(a)opensuse.org

1 0

[opensuse-xorg] X+nvidia+bzflag
by TooMany Secrets 12 Jun '08

12 Jun '08

Hi! Please, first excuse me if this isn't the right place to make this question, and second about my bad english... I have a machine with opensuse 11 updated up yesterday. The nvidia driver is the latest 173.14.05 for i386. My vga a Nvidia Quadro FX 540. I like to play with Bzflag, but since I upgraded the last 10.3 system to 11, is impossible because no brigth in the game... How I could say... All is dark. I could see something fixating a lot my eyes, but all in general is very very dark. And the Bright function in the game Bzflag is not working (when I move to "more bright" nothing happens). The rest of X system is working and looking very right (kde4 is really wonderful). Here is an "lspci" of this machine: 00:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub 00:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev01) 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation NV43GL [Quadro FX 540] (rev a2) 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) 05:04.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01) Also, attached to this mail are the Xorg.0.log file and the /etc/X11/xorg.conf file. Note that "xorg.conf" have commented the monitor refresh lines. Thank you very much. -- Have a nice day ;-) TooManySecrets ============================ Dijo Confucio: "Exígete mucho a ti mismo y espera poco de los demás. Así te ahorrarás disgustos." ============================

1 0