September 2005 - openSUSE X.org - openSUSE Mailing Lists

ATI mobility radeon 9600 & suse 9.2 problems
by Yiannis Georgiadis 07 Oct '05

07 Oct '05

Hi, I have a notebook with ATI mobility Radeon 9600 and i installed suse 9.2 linux with Xorg 6.8.1 I also applied fglrx 8.16.20 package from ATI 's website and then I tried with fglrxconfig ... but X cannot start ... seems grey, the basic KDE window appears and then all are become grey again .. my xorg.log gives some getmodelines at the end ... May I practise with fglrxconfig monitor syncs or I need other basic packages ? kernel, Xorg ... ? Thanks in advance Yiannis

4 3

X.org 6.9/7.0
by Rainer Klier 05 Oct '05

05 Oct '05

hi, does anybody know, when there will be a X.org 6.9/7.0 for suse9.3? or at least a new version of 6.8.2 for suse9.3? with the 6.8.2 included in suse9.3 there is a problem: with an Intel(r)865G Graphics Controller and an hp p930 19" monitor i only get 74hz@1600*1200 whereas with 6.8.2rc2 (and all former releases) i get 85hz@1600*1200 with the same hardware. -- einen schönen Tag noch DI Rainer Klier Abteilung IT - Entwicklung ECOLOG Logistiksysteme GmbH Bauernstraße 11, A-4600 Wels Tel. ++43/7242/66200 Fax ++43/7242/66200-200 mailto:kra@ecolog.at http://www.ecolog.at

4 3

ATI DVI to VGA problem
by Wieland 13 Sep '05

13 Sep '05

Hi I bought a ATEN (http://www.aten.com.tw) multimonitor switch in order to have multiple PCs on one screen. Then I connected my Suse 9.3 box , which was connected over the DVI port of the grafics card, to the switch an the trouble began. The Mouse and keyboard are recognised as follows. input: USB HID v1.00 Keyboard [ATEN CS-1734A V1.2.113] on usb-0000:00:10.1-2.1 input: USB HID v1.00 Mouse [ATEN CS-1734A V1.2.113] on usb-0000:00:10.1-2.1 Some facts: a) If I boot and the LCD is only connected over the VGA port. 1) Its still possible to use Virtual Text consoles over the kb/mouse/monitor switch. 2) virtual console 7 is just blank over VGA cable (which should the xdm login) b) If i boot and the LCD is connected over the DVI Port everything is fine. So the question is: *What is nec. in order to get X11 working over the analog port ? A new configuration was tried several times over init level 3 and with a sax2 -r* ---------------------------------------------------------------------------------- xorg.conf # /.../ # SaX generated X11 config file # Created on: 2005-09-11T13:00:04+0200. # # Version: 4.8 # Contact: Marcus Schaefer <sax(a)suse.de>, 2002 # # Automatically generated by [SaX2] (4.8) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/kwintv" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/xtest" FontPath "/opt/kde3/share/fonts" InputDevices "/dev/ttyS0" InputDevices "/dev/ttyS1" InputDevices "/dev/ttyS2" InputDevices "/dev/ttyS3" InputDevices "/dev/ttyS4" InputDevices "/dev/ttyS5" InputDevices "/dev/ttyS6" InputDevices "/dev/ttyS7" InputDevices "/dev/ttyS8" InputDevices "/dev/psaux" InputDevices "/dev/logibm" InputDevices "/dev/sunmouse" InputDevices "/dev/atibm" InputDevices "/dev/amigamouse" InputDevices "/dev/atarimouse" InputDevices "/dev/inportbm" InputDevices "/dev/gpmdata" InputDevices "/dev/mouse" InputDevices "/dev/usbmouse" InputDevices "/dev/adbmouse" InputDevices "/dev/input/mice" InputDevices "/dev/input/event0" InputDevices "/dev/pointer0" InputDevices "/dev/pointer1" InputDevices "/dev/pointer2" InputDevices "/dev/pointer3" EndSection Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "glx" Load "v4l" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "pc104" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "7" Option "Device" "/dev/input/mice" Option "Name" "ATEN International CS-1734A V1.2.113" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" DisplaySize 340 270 HorizSync 31-48 Identifier "Monitor[0]" ModelName "SYNCMASTER 4S" Option "DPMS" VendorName "SAMSUNG" VertRefresh 43-75 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x1024" 77.62 1280 1344 1480 1680 1024 1025 1028 1050 Modeline "1024x768" 63.04 1024 1080 1184 1344 768 769 772 795 Modeline "800x600" 47.53 800 840 920 1040 600 601 604 626 Modeline "640x480" 29.84 640 664 728 816 480 481 484 501 EndSection Section "Device" BoardName "RV280 5960" BusID "1:0:0" Driver "radeon" Identifier "Device[0]" VendorName "ATI" EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection

2 1

ATI fglrx
by Alexandru Codilean 07 Sep '05

07 Sep '05

Dear All, I am currently running SuSE 9.1 on a Thinkpad R50p using the ATI fglrx driver downloaded from a SuSE mirror FTP. In case I upgrade to version 9.3 (using the upgrade option instead of the new install one) do I need to reinstall and reconfigure these drivers, or Yast will do it automatically? I am guessing that I have to download and reconfigure. Thanks Tibi ____________________________________________________ Alexandru Tiberiu CODILEAN PhD Candidate Department of Geographical and Earth Sciences East Quadrangle, Room 309 University Avenue University of Glasgow Glasgow G12 8QQ UK Tel: +44 (0) 141 330 4872 ext. 0935 Fax: +44 (0) 141 330 4894 Email: tcodilean(a)ges.gla.ac.uk Web: http://web.ges.gla.ac.uk/~tcodilean/ A gleekzorp without a tornpee is like a quop without a fertsneet (sort of)

2 1

Test
by Colin Carter 06 Sep '05

06 Sep '05

Sorry fellas, but I'm not getting any mail, so this is just a test to see if the list is active. Regards, Colin

3 2