May 2019 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] spyder-3.3.4-1.1 missing dependency python-spyder-kernels >= 0.4.3
by Franklin Titus 29 May '19

29 May '19

Factory 20190525 spyder-3.3.4-1.1 is missing dependency python-spyder-kernels >= 0.4.3. Here is zypper dup output: zypper dup Loading repository data... Reading installed packages... Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Computing distribution upgrade... 10 Problems: Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: Following actions will be done: deinstallation of spyder-3.3.2-1.2.noarch deinstallation of spyder-unittest-0.3.1-2.2.noarch Solution 2: keep obsolete spyder-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-breakpoints-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-breakpoints-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-dicom-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-dicom-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-hdf5-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-hdf5-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-lang-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-lang-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-profiler-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-profiler-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-pylint-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-pylint-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-pylint-lang-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-pylint-lang-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-profiler-lang-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-profiler-lang-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Problem: nothing provides python-spyder-kernels >= 0.4.3 needed by spyder-3.3.4-1.1.noarch Solution 1: deinstallation of spyder-breakpoints-lang-3.3.2-1.2.noarch Solution 2: keep obsolete spyder-breakpoints-lang-3.3.2-1.2.noarch Solution 3: break spyder-3.3.4-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): 1 Resolving dependencies... Computing distribution upgrade... The following 3 NEW packages are going to be installed: python2-nbconvert python2-notebook python2-qtconsole The following 14 packages are going to be REMOVED: python2-jupyter_nbconvert python2-jupyter_notebook python2-jupyter_qtconsole spyder spyder-breakpoints spyder-breakpoints-lang spyder-dicom spyder-hdf5 spyder-lang spyder-profiler spyder-profiler-lang spyder-pylint spyder-pylint-lang spyder-unittest 3 new packages to install, 14 to remove. Overall download size: 5.0 MiB. Already cached: 0 B. After the operation, 10.0 MiB will be freed. Continue? [y/n/v/...? shows all options] (y): n -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] openSUSE Leap 15.1 + SoundBlaster Zx (Core3D/ca0132)
by newsletter＠alex.steinhoefer.net 28 May '19

28 May '19

Hi all, first of all: I hope this is the right mailing list, if not please send me to the correct one Since I've read that some graphics and multimedia hardware sup- port has been backported from a newer Linux kernel, I just in- stalled Leap 15.1 to check if my SoundCard (a Creative Sound- Blaster Zx) now works, but alas it still doesn't produce any sound. I know that it works with Tumbleweed, but I'd rather use Leap for my main Workstation. Would it be possible to merge Connor McAdams' patches (applied by Suses Takashi Iwai: https://lkml.org/lkml/2018/10/2/1231) some- time in the future for Leap 15.1 or do you guys have any other ideas how I might convince Leap to play sound with this card? Thanks for your time and help! - Alex Steinhöfer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 6

[opensuse-factory] RPM compression in openSUSE for 201904
by Jan Engelhardt 28 May '19

28 May '19

Following up on https://lists.opensuse.org/opensuse-factory/2018-10/msg00111.html >Compression performance plots are often done with something like the >Silesia corpus. Linux distributions have rather different proportions >of file types […] a lot of machine code, and even more data files, and >probably not so much text and images. Since our data set is also 2.8 >orders of magnitude bigger, rerunning a compression shootout will give >more detail. >http://paste.opensuse.org/15790105 >http://inai.de/files/openSUSE-compression.ods http://paste.opensuse.org/view/26689667 (upload complete but viewer broken?) http://inai.de/files/openSUSE-compression-201904.ods The takeaway for 2019-04 (over 2018-10) is: * Distribution grew by 11% (uncomp.) * gzip lost a bit (no more than 2%) in speed * zstd lost ~7% in speed; has a large outlier -25% on z16/z17 * bzip2 lost ~15% in speed * xz wins up to 2% in speed * (therefore I would assume Spectre mitigations are not a factor) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] btrfs woes
by Erwin Van de Velde 28 May '19

28 May '19

Hi, You could try to mount it once with the clear_cache mount option. I know it helped me in the past (few years ago) when such a thing happened. btrfs-freespace should recalculate the actual free space. Aferwards, mount normally again. Kind regards, Erwin On Tue, May 28, 2019 at 1:53 PM Erwin Van de Velde <erwin.vandevelde(a)gmail.com> wrote: > > Hi, > > You could try to mount it once with the clear_cache mount option. I know it helped me in the past (few years ago) when such a thing happened. Aferwards, mount normally again. > > Kind regards, > Erwin > > > On Mon, May 27, 2019 at 6:59 PM Oliver Kurz <okurz(a)suse.de> wrote: >> >> On Monday, 27 May 2019 02.12.51 CEST Peter Suetterlin wrote: >> > Hi list, >> > >> > my laptop just died away while running. First thought it was an application >> > error (kstars/EKOS), as that one stoped updating, while e.g. my emacs still >> > worked. But after some 10 more seconds everything stoped responding, and I >> > finally had to press the power button. >> > >> > After that, the system boot would hang reproducably telling me it's waiting >> > for ridiculous stuff like saving the kill switch state, flushing the journal >> > to persistent storage and some 2 others I couldn't remember. >> > >> > After three unsuccessful trials, I booted from a rescue disk. Expecting bad >> > things, I tried mounting my root partition - but it did so without >> > complaints. >> > >> > To be sure, I ran an 'btrfs scrub start /mnt' that finished after some 1-2 >> > minutes. Not really having more ideas I rebooted, and now the system came >> > up fine. >> > >> > Looking at the last logfile entries I see it was running btrfsmainainance, >> > doing trim and balance. URL: http://paste.opensuse.org/24906643 >> > >> > Interesting cutouts are >> > May 27 00:02:10 woodstock.pitnet btrfs-balance.sh[17806]: /dev/sda2 >> > 73G 67G 5.6G 93% / .... >> > May 27 00:02:10 woodstock.pitnet kernel: BTRFS info (device sda2): balance: >> > start -musage=1 -susage=1 May 27 00:02:10 woodstock.pitnet kernel: BTRFS >> > info (device sda2): relocating block group 398848950272 flags metadata May >> > 27 00:02:10 woodstock.pitnet kernel: BTRFS info (device sda2): found 2 >> > extents May 27 00:02:10 woodstock.pitnet kernel: BTRFS info (device sda2): >> > 1 enospc errors during balance May 27 00:02:10 woodstock.pitnet kernel: >> > BTRFS info (device sda2): balance: ended with status: -28 May 27 00:02:10 >> > woodstock.pitnet btrfs-balance.sh[17806]: ERROR: error during balancing >> > '/': No space left on device ..... >> > May 27 00:02:10 woodstock.pitnet btrfs-balance.sh[17806]: Done, had to >> > relocate 1 out of 84 chunks May 27 00:02:10 woodstock.pitnet kernel: BTRFS >> > info (device sda2): balance: start -musage=10 -susage=10 May 27 00:02:10 >> > woodstock.pitnet kernel: BTRFS info (device sda2): relocating block group >> > 398848950272 flags system May 27 00:02:10 woodstock.pitnet kernel: BTRFS >> > info (device sda2): relocating block group 398815395840 flags metadata May >> > 27 00:02:10 woodstock.pitnet kernel: assertion failed: root, file: >> > fs/btrfs/relocation.c, line: 804 May 27 00:02:10 woodstock.pitnet kernel: >> > ------------[ cut here ]------------ May 27 00:02:10 woodstock.pitnet >> > kernel: kernel BUG at fs/btrfs/ctree.h:3518! >> > >> > That's where the log ends. >> > Not sure what to do with this. Why is it running out of space with 5.6G >> > left? what are those two last messages? >> >> I can not really answer both those questions however running into "out of >> space" myself even though there should be enough free space (and metadata >> space) I deleted more data until all subsequent balance runs with the >> increasing "-musage" and "-susage" numbers successfully finished. >> >> > Should this go to bugzilla? Even >> > without proper/complete error messages? >> >> I looked on bugzilla and did not find a report with the specific line >> "kernel BUG at fs/btrfs/ctree.h:3518!" so I recommend to report a bug. >> >> >> -- >> To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org >> To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org >> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] virtualbox autostart separation and systemd service order
by Hans-Peter Jansen 28 May '19

28 May '19

Hi, attempting to separate the virtualbox autostart feature from vboxdrv, because it bites me on every reboot... I run vboxes with user privilege, but that's an LDAP user, only available after openldap¹ and sssd is up and alive. Now, a lot more user databases exist, and I don't want to add all systemd deps specifically... Since systemd isn't the nicest player, when it comes to run services last, Type=idle seems to be the best way to delay its execution for me. Other ideas? The motivation for delaying the vbox autostart should be obvious, and is not limited to this specific constellation.. Needless to say, but the shutdown should happen *first* in the reboot/halt procedure. Can you point me to services with similar requirements? Thanks in advance, Pete ¹) during 13.2..15.0 upgrade, I tried migrating to ds389, but failed so far, even openLDAP wasn't that easy to reanimate... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] pdnsd package requires maintainance
by Dmitriy Perlow 28 May '19

28 May '19

Hi to all. pdnsd' SysV init scripts should be converted into native systemd services [1]. Afai see it is should not be a rocket science. However I had not have a time for a half of a year. Any help would be appreciated unless I will have to make a delete request from Factory. [1] https://bugzilla.suse.com/show_bug.cgi?id=1116030 -- Best regards, Dmitriy Perlow -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Where did "wheel" go? sudo and pam.d/su need
by David C. Rankin 28 May '19

28 May '19

All, Where did the 'wheel' system group (GID 10) go? Both sudo and pam.d/su rely on it being present. If wheel is "deprecated" it should still be there until it is "removed" which isn't likely. Even then, the "sudo" group (the undeprecated replacement) should be present, but it too is absent. Now with visudo, you have: ## Uncomment to allow members of group wheel to execute any command # %wheel ALL=(ALL) ALL ## Same thing without a password %wheel ALL=(ALL) NOPASSWD: ALL (but no wheel group in 15.1) And for /etc/pam.d/su in order for members of wheel to be able to su without a password you need: auth sufficient pam_wheel.so trust use_uid auth required pam_wheel.so use_uid (but no wheel group for pam_wheel.so -- which is present, and after manually adding a wheel group works as it is intended) So, where did the "wheel" group roll off to? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

13 38

[opensuse-factory] Heads-up: support for /etc/init.d/halt.local will be dropped in the next version of systemd (v243)
by Franck Bui 27 May '19

27 May '19

Hi, Please see: https://github.com/systemd/systemd/pull/12571 It seems that halt.local is very little used (one of the reasons might be because its lack of documentation) and systemd offers a better mechanism to run scripts at shutdown, see systemd-shutdown(8) man page. In order to follow upstream as close as possible, we would like to see the support of this script removed too. Therefore we will start deprecating the use of this script in the next update and remove it completely on the next version of systemd unless there are still many users of it and in this case we will go for a longer period of deprecation. Thanks. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] NetworkManager in LXQt AWOL in 15.1
by Felix Miata 27 May '19

27 May '19

I just installed NET on a 12 year old Vaio laptop. Extra details are in an unrelated bug report I filed: https://bugzilla.opensuse.org/show_bug.cgi?id=1135723 This was a NET installation started from Grub template that I forgot to delete fixed IP configuration on before beginning, of LXQt pattern. Now I need to switch to DHCP, but there's no NM in YaST or anywhere I can find in menus, or in system tray, and YaST is blocked from changes by NM. These are all the kmanag searched packages installed shown by YaST: NetworkManager-1.10.6-lp151.8.1.x86_64 NetworkManager-branding-openSUSE-42.1-lp151.3.2.noarch NetworkManager-lang-1.10.6-lp151.8.1.noarch libKF5NetworkManagerQt6-5.55.0-lp151.1.1.x86_64 libnm0-1.10.6-lp151.8.1.x86_64 libproxy1-networkmanager-0.4.15-lp151.3.5.x86_64 ## remainder of # rpm -qa | egrep -i 'kmanag|nm' | sort libopenmpt0-0.3.9-lp151.1.4.x86_64 libsnmp30-5.7.3-lp151.7.5.x86_64 net-snmp-5.7.3-lp151.7.5.x86_64 perl-SNMP-5.7.3-lp151.7.5.x86_64 plasma-nm5-5.12.8-lp151.1.1.x86_64 plasma-nm5-lang-5.12.8-lp151.1.1.noarch snmp-mibs-5.7.3-lp151.7.5.x86_64 typelib-1_0-NM-1_0-1.10.6-lp151.8.1.x86_64 What's missing? NetworkManager-applet, not installed, is described as GTK. Isn't there supposed to be something for NM not based upon GTK? -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 10

[opensuse-factory] New Tumbleweed snapshot 20190525 released!
by Dominique Leuenberger 27 May '19

27 May '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: acpica (20190405 -> 20190509) ceph (14.2.1.431+gd032e5dd80 -> 14.2.1.448+g1bd10a856f) curl (7.64.1 -> 7.65.0) fwupd (1.2.3 -> 1.2.8) gcc (8 -> 9) gcc7 gcc9 (9.0.1+r270591 -> 9.1.1+r271393) gdb hwinfo (21.64 -> 21.66) insserv-compat libimagequant libreoffice libssh libvirt perl-Mojolicious (8.16 -> 8.17) pmdk (1.5 -> 1.6) python-ipy (0.83 -> 1.00) python-pycryptodome === Details === ==== acpica ==== Version update (20190405 -> 20190509) - Update to version 20190509 Includes a fix that breaks VirtualBox https://github.com/acpica/acpica/issues/462 ==== ceph ==== Version update (14.2.1.431+gd032e5dd80 -> 14.2.1.448+g1bd10a856f) Subpackages: librados2 librbd1 - Update to 14.2.1-448-g1bd10a856f: + monitoring: update Grafana dashboards + mgr/dashboard: fix some performance data are not displayed + monitoring: SNMP OID per every Prometheus alert rule + mgr/dashboard: Validate if any client belongs to more than one group + mgr/dashboard: Admin resource not honored + mgr/dashboard: Unable to see tcmu-runner perf counters + mgr/dashboard: iSCSI form does not support IPv6 - Update to 14.2.1-440-g0ac6920288: + rebase on top of upstream nautilus branch, SHA1 1dc43a036fcc0121e3a0c1fe7ca6cd77cde1bf60 + client: fix vxattr nanosecond field padding (bsc#1135219, bsc#1135221) ==== curl ==== Version update (7.64.1 -> 7.65.0) Subpackages: libcurl4 - Update to 7.65.0 [bsc#1135176, CVE-2019-5435][bsc#1135170, CVE-2019-5436] * Changes: - CURLOPT_DNS_USE_GLOBAL_CACHE: removed - CURLOPT_MAXAGE_CONN: set the maximum allowed age for conn reuse - pipelining: removed * Bugfixes: - CVE-2019-5435: Integer overflows in curl_url_set - CVE-2019-5436: tftp: use the current blksize for recvfrom() - --config: clarify that initial : and = might need quoting - CURLMOPT_TIMERFUNCTION.3: warn about the recursive risk - CURLOPT_ADDRESS_SCOPE: fix range check and more - CURLOPT_CHUNK_BGN_FUNCTION.3: document the struct and time value - CURLOPT_READFUNCTION.3: see also CURLOPT_UPLOAD_BUFFERSIZE - CURL_MAX_INPUT_LENGTH: largest acceptable string input size - Curl_disconnect: treat all CONNECT_ONLY connections as "dead" - OS400/ccsidcurl: replace use of Curl_vsetopt - OpenSSL: Report -fips in version if OpenSSL is built with FIPS - WRITEFUNCTION: add missing set_in_callback around callback - altsvc: Fix building with cookies disabled - auth: Rename the various authentication clean up functions - base64: build conditionally if there are users - cmake: avoid linking executable for some tests with cmake 3.6+ - cmake: clear CMAKE_REQUIRED_LIBRARIES after each use - cmake: set SSL_BACKENDS - configure: avoid unportable '==' test(1) operator - configure: error out if OpenSSL wasn't detected when asked for - configure: fix default location for fish completions - cookie: Guard against possible NULL ptr deref - curl: make code work with protocol-disabled libcurl - curl: report error for "--no-" on non-boolean options - curlver.h: use parenthesis in CURL_VERSION_BITS macro - docs/INSTALL: fix broken link - doh: acknowledge CURL_DISABLE_DOH - doh: disable DOH for the cases it doesn't work - examples: remove unused variables - ftplistparser: fix LGTM alert "Empty block without comment" - hostip: acknowledge CURL_DISABLE_SHUFFLE_DNS - http: Ignore HTTP/2 prior knowledge setting for HTTP proxies - http: acknowledge CURL_DISABLE_HTTP_AUTH - http: mark bundle as not for multiuse on < HTTP/2 response - http_digest: Don't expose functions when HTTP and Crypto Auth are disabled - http_negotiate: do not treat failure of gss_init_sec_context() as fatal - http_ntlm: Corrected the name of the include guard - http_ntlm_wb: Handle auth for only a single request - http_ntlm_wb: Return the correct error on receiving an empty auth message - lib509: add missing include for strdup - lib557: initialize variables - mbedtls: enable use of EC keys - mime: acknowledge CURL_DISABLE_MIME - multi: improved HTTP_1_1_REQUIRED handling - netrc: acknowledge CURL_DISABLE_NETRC - nss: allow fifos and character devices for certificates - nss: provide more specific error messages on failed init - ntlm: Fix misaligned function comments for Curl_auth_ntlm_cleanup - ntlm: Support the NT response in the type-3 when OpenSSL doesn't include MD4 - openssl: mark connection for close on TLS close_notify - openvms: Remove pre-processor for SecureTransport - parse_proxy: use the URL parser API - parsedate: disabled on CURL_DISABLE_PARSEDATE - pingpong: disable more when no pingpong protocols are enabled - polarssl_threadlock: remove conditionally unused code - progress: acknowledge CURL_DISABLE_PROGRESS_METER - proxy: acknowledge DISABLE_PROXY more - resolve: apply Happy Eyeballs philosophy to parallel c-ares queries - revert "multi: support verbose conncache closure handle" - sasl: Don't send authcid as authzid for the PLAIN mechanism as per RFC 4616 - sasl: only enable if there's a protocol enabled using it - singleipconnect: show port in the verbose "Trying ..." message - socks5: user name and passwords must be shorter than 256 - socks: fix error message - socksd: new SOCKS 4+5 server for tests - spnego_gssapi: fix return code on gss_init_sec_context() failure - ssh-libssh: remove unused variable - ssh: define USE_SSH if SSH is enabled (any backend) - ssh: move variable declaration to where it's used - test1002: correct the name - test2100: Fix typos in test description - tests: Run global cleanup at end of tests - tests: make Impacket (SMB server) Python 3 compatible - tool_cb_wrt: fix bad-function-cast warning - tool_formparse: remove redundant assignment - tool_help: Warn if curl and libcurl versions do not match - tool_help: include for strcasecmp - url: always clone the CUROPT_CURLU handle - url: convert the zone id from a IPv6 URL to correct scope id - urlapi: add CURLUPART_ZONEID to set and get - urlapi: increase supported scheme length to 40 bytes - urlapi: require a non-zero host name length when parsing URL - urlapi: stricter CURLUPART_PORT parsing - urlapi: strip off zone id from numerical IPv6 addresses - urlapi: urlencode characters above 0x7f correctly - vauth/cleartext: update the PLAIN login to match RFC 4616 - vauth/oauth2: Fix OAUTHBEARER token generation - vauth: Fix incorrect function description for Curl_auth_user_contains_domain - vtls: fix potential ssl_buffer stack overflow - wildcard: disable from build when FTP isn't present - xattr: skip unittest on unsupported platforms ==== fwupd ==== Version update (1.2.3 -> 1.2.8) Subpackages: fwupd-lang libfwupd2 - Update to version 1.2.8: * Don't upload reports when the user has configured their system in a broken way * Allow setting the daemon verbose domains at runtime * Allow fwupdmgr to modify the daemon config * Do not compare version formats when the release format is unknown * Do not fall back integers to a plain version format * Use the device version format when converting the release version * Set the VersionFormat using the metadata or the UEFI quirk - Changes from version 1.2.7: * l10n: Create Lithuanian translation file * l10n: Update LINGUAS * Updated: Add support for 8BitDo M30. * modem-manager: increase the timeout to wait for modem after uninhibited * modem-manager: implement qmi pdc active config selection as attach() * fu-engine: When removing activation flag match the correct version * Require --force to install a release with a different version format * Match the old or new version number when setting NEEDS_REBOOT * Make an error message clearer when there are no updates available * Add support for the not-child extension from Logitech * thunderbolt: Set require-ac for Thunderbolt devices (Fixes: gh#hughsie/fwupd#1142) * Fix some typos spotted using codespell * Add a component categories to express the firmware type * fu-tool: Port get-history command to fwupdtool * Recreate the history database if migration failed * Move the core built-in 'fwupd' remote over to the dell-esrt plugin * snap: Add a custom systemd unit to call activation on shutdown (Fixes: gh#hughsie/fwupd#1125) * ata: Flush cache before standby and activate * synapticsmst: blacklist plugin when using amdgpu (Fixes: gh#hughsie/fwupd#1121) * uefi: add a new option to specify the os name * Return the newest device when using fu_history_get_device_by_id() * uefi: More carefully check the output from tpm2_pcrlist * uefi: Don't overwrite CustomFlags if set from a quirk * Shut down the daemon if the on-disk binary is replaced * ata: Correct activation functionality * Fix version comparisons after reboot for some formats * fu-tool: save history from stuff installed with `fwupdtool` - Changes from version 1.2.6: * ata: send ATA standby immediate when activating firmware * offline: Be more graceful when dealing with Plymouth failures * Save the new version in the history database for offline updates * Show the DeviceID when showing the updates list * Allow forcing an offline-only update on a live system using --force * Do not schedule an update on battery power if it requires AC power * superio: Add InstallDuration default value * superio: Add support for writing new e-flash contents * superio: Fix reading the attestation checksum * superio: Add support for reading the device checksum * superio: Use the chipset ID in the device name * superio: Move the device flush before getting the register map * superio: Move all the IT89xx code to a subclassed device object * superio: Move all the IT85xx code to a subclassed device object * superio: Split and export fu_superio_device_ec_writeX() * superio: Remove the port from fu_superio_device_ec_read() * superio: Move the register read/write into the FuSuperioDevice object * superio: Check the IOBAD0 is usable during setup * superio: Use fu_device_set_firmware_size() * superio: Move some constants out to the common header * superio: Use GObject properties in FuSuperioDevice * superio: Convert FuSuperioDevice to be derivable * Update Plymouth when updating pending firmware * Ask to reboot after scheduling an offline firmware update * Do not fail when scheduling more than one update to be run offline * Allow running offline updates when in system-update.target * Fix the location of fwupdoffline in the service file * Add optional vfuncs to allow detaching and attaching verify() * superio: Add list of SPI commands for future usage * Add a verify-update command to fwupdtool * uefi: Actually upload the UPDATE_INFO entry for the UX capsule * superio: Get the chip size from the EC rather than hardcoding * uefi: Check the error code of QueryCapsuleCapabilities() correctly * Update the UEFI UX Capsule Header checksum when needed. * uefi: Copy the shimx64.efi binary for known broken firmware * Correctly get the check the new version for devices that replug * Add a simple script to add a capsule header * Ensure the PKCS-7 client certificate exists at startup * fix makecab directive options * fwpup.service: use display-manager.service instead of gdm.service * Allow signing the fwupd report with the client certificate * Add a D-Bus method to generate a signature using the self-signed client certificate * Allow signing and verifying data using a PKCS-7 self-signed client certificate * Fix a critical warning when loading a PKCS-7 certificate with no DN * Include all device checksums in the LVFS report * modem-manager: Fix a trivial build warning * superio: Fix a trivial build warning * Move out the offline update functionality to a new binary * Do not reboot when failing to start fwupd during offline updates * Do not write the schema version to the db when loading * Do not recreate XbSilo caches when running on a readonly filesystem * Add the fwupdagent binary for use in shell scripts * Allow restricting firmware updates for enterprise use * standalone-installer: new --allow-older and --allow-reinstall options * Show the upgrade and downgrade flags when getting releases for a device * Rename FwupdRelease:trust-flags to FwupdRelease:flags * fu-tool: Save device state to @LOCALSTATEDIR@/lib/fwupd/state.json on actions * modem-manager: implement support for qmi-pdc * Add a plugin to support ModemManager hardware * fu-tool: Don't let failing to find dbus prevent engine from starting * ata: Support delayed activation * dell-dock: Use activation when calling fwupdtool activate * Add a support for delayed activation * uefi: Fix the self tests when running on Fedora SilverBlue * Do not fail to start the daemon if tpm2_pcrlist hangs * po/make-images.sh: quote LOCALEDIR and PYTHON3 * meson: print stderr of python3 command instead of stdout * Revert "contrib/debian: Switch to debian unstable" * Add elogind support - Changes from version 1.2.5: * uefi: fix segfault in fwup_set_update_statuses * Show in Flathub correctly * debian: explicitly depend on shared-mime-info * superio: Implement detach() and attach() * superio: Correct the names of some constants and improve debugging support * dell-dock: Filter the last supported payloads of certain board 4 SKUs * circleci: Manage the lifecycle of the snap * Add support to run snap build in CircleCI * wacom-usb: Use the correct buffer format for the touch module * wacom-usb: Set the install duration for each device type * wacom-usb: Return with an error if there were too many retries * wacom-usb: Make updating less verbose * Convert all child instance IDs when converting the parent * uefi: Allow devices to create more complete fake UEFI devices * unifying: Fix regression when recovering from failed flash * Ensure libxmlb dir exists for LGTM.com * Add C build configuration for LGTM.com * Use G_BEGIN_DECLS correctly for internal headers * standalone-installer: Fix issue found by LGTM * Use '#pragma once' to avoid a lot of boilerplate * Force LGTM to see Python 3 * fwupd: Hide firmware-packager behind meson option` * fu-common-cab: Correct handling of CAB files w/ nested directories and older libgcab * Fix a regression in using the InstanceIDs for quirk matching * thunderbolt: Convert the instance IDs as we never open the device * udev: Manally call fu_device_setup() to convert the instance IDs * fu-tool: Correct a crash caused by calling fwupdtool update * fu-tool: Don't fail if dbus is unavailable * contrib/debian: Switch to debian unstable * wacom-usb: Record the block number when failing * wacom-usb: The touch address is big endian * wacom-usb: Accept a non-binary IHEX file for the touch update * wacom-usb: Only poll when the device status is 'busy' * wacom-usb: Only reboot the device when all composite devices have been updated * wacom-usb: Fix flashing failure with latest Intuos Pro tablet * dfu: Fill holes when reading SREC files * Add fwupd_guid_from_string() to drop dep on uuid * wacom-raw: Check the InstanceID rather than GUID * Defer the InstanceID->GUID hashing until after setup * ata: Check for USB enclosures as well * Do not use efivar just to print a mixed endian GUID * Add fu_device_add_instance_id() and prefer explicit conversion * Report the DeviceInstanceIDs to `fwupdmgr get-updates` * Export some of the GUID functionality * Allow a plugin to set _ANOTHER_WRITE_REQUIRED to run more than one plugin * nvme: Add an extra check for Dell plugins to avoid false positives * ata: Add support for detecting Dell GUIDs * Fix the self tests when using glib2 >=2.59.0 * Add support to call composite prepare and cleanup using fwupdtool * uefi: Disable -Wno-address-of-packed-member * uefi: Don't unconditionally enable Werror for the EFI binary * Disable -Wno-address-of-packed-member - Changes from version 1.2.4: * Remove the autogenerated headers in the gettext files * ata: Default to the non-activation 0xE subcommand * fastboot: Use a much longer timeout as the removal delay * fu-progressbar: be more quiet when running non-interactive * fu-tool: Show UpdateMessage if applicable for install command * dfu: Simplify the SREC parser to avoid a crash with an invalid file * wacom-raw: Use the correct error codes when the panel is not supported * wacom-usb: Add some more information to the README * fu-keyring-utils: Don't fail missing PKI directory when compiled with GPG/PKCS7 * dell: Check that the flash interface command is available * wacom-usb: Fix the plugin name to allow devices to be updated * fastboot: flash the partition after downloading the file * uefi: Add a quirk to use the legacy bootmgr description * ata: Mark all devices as needing a reboot * ata: Add a new plugin to upgrade firmware on ATA/ATAPI hardware * udev-device: Add a utility function for debugging * udev-device: Set the firmware revision automatically * udev-device: Set the serial number automatically * udev-device: Fall back to non-database model and vendor values * udev-device: Fix critical warning if the device has no parent * dell-dock: Add support for a passive flow * Add support for an `UpdateMessage` and display it in tools * fu-tool: Port the `get-updates` command over * When using `directory` remote type automatically generate metadata * libfwupd: Add support for new remote type "directory" * Ensure cabinet archives always have a container checksum * Add support for a per-release source and details URL * When generating a CAB Silo use the prefix "components" * uefi: Add a trivial debugging statement to debug a UX capsule failure * uefi: Use fwup_new0() to allocate the updates table array * nitrokey: Correct Nitrokey Storage invalid firmware version read * dell-dock: Add support for flashing Thunderbolt over I2C * wacom-raw: Add a plugin to update Wacom embedded EMR and AES panels * fu-util/fu-tool: sync up reboot and shutdown behavior * dfu: Ignore the SUB ASCII value * dfu: Fix the parser to support extended segment addresses * dfu: Support ihex files with leading comments don't show an error * uefi: Correct a boot order creation bug (Fixes: gh#hughsie/fwupd#956) * uefi: Remove all variable length arrays * uefi: Fix a logic bug in fwup_search_file() * uefi: Use _cleanup_free in one more place * uefi: Do not pass required attrs to fwup_delete_variable() * uefi: Delete the old Linux-Firmware-Updater boot entry * uefi: Use the GNU-EFI BOOL type * Check if plugin changed after the device attaches or detaches * uefi: Refactor and simplify the EFI loader * Show a console warning if loading an out-of-tree plugin * UEFI: Do the UX checksum calculation in fwupd * wacom-usb: Add two more Intuos tablets * nvme: Add the needs-shutdown quirk to Phison NVMe drives * Add _NEEDS_SHUTDOWN flag for devices * Use GCC __cleanup__ features in the EFI loader * nvme: Add flag to support manually aligning the firmware to the FWUG value * nvme: Support FGUID to get the SKU GUID * nvme: Support FWUG to get the write block size * nvme: Add trivial comment to clarify address bitshifting * uefi: Do not check the BGRT status before uploading a UX capsule * dfu: Fix flashing various Jabra devices * upower: Add support for checking battery percentage * nvme: Check the return code of the admin passthru ioctl * fu-tool: Add support for an 'update' command to fwupdtool * dell-dock: Set minimum board to board 4 * dell-dock: Workaround a manufacturing bug for board level 4 * dell-dock: Wait longer for re-enumeration on TBT SKU * superio: Support IT89xx devices * fu-main: remove incompatible locale error message * Add a new plugin checklist (Fixes: gh#hughsie/fwupd#899) - Dropped obsolete patch: fwupd-bsc1130056-change-esp-os-name.patch (upstream PR: gh#hughsie/fwupd#1119 - Fixed fwupd-bsc1130056-change-shim-path.patch so that it works with the new files - Cleaned up changelog ==== gcc ==== Version update (8 -> 9) Subpackages: cpp gcc-c++ gcc-fortran gcc-info gcc-objc libstdc++-devel - Add ada links on riscv64 - Package default D compiler. - Switch gcc to default 9. ==== gcc7 ==== - Strip -flto from $optflags. ==== gcc9 ==== Version update (9.0.1+r270591 -> 9.1.1+r271393) Subpackages: libasan5 libatomic1 libgcc_s1 libgcc_s1-32bit libgfortran5 libgomp1 libitm1 liblsan0 libobjc4 libquadmath0 libstdc++6 libstdc++6-32bit libstdc++6-locale libtsan0 libubsan1 - Update to gcc-9-branch head (r271393). - Always use ISL for crosses like for native compilers. - Update to gcc-9-branch head (r271050). - Strip -flto from $optflags as we use LTO bootstrap config. - Update to GCC 9.1.0 release. - Update to gcc-9-branch head (r270796). - Enable D for s390x. - Enable D for aarch64 and riscv64 - Update to gcc-9-branch head (r270689). * GCC 9.1 RC2. ==== gdb ==== - Add gdb-gcc9-fix-build-with-latest-GCC-9.0-tree.patch and gdb-gcc9-warning-on-elf32-arm.c-elf32_arm_final_link.patch in order to fix build with GCC9. ==== hwinfo ==== Version update (21.64 -> 21.66) - merge gh#openSUSE/hwinfo#80 - fix Makefile and allow building for old distros - 21.66 - merge gh#openSUSE/hwinfo#79 - return BIOS UUID in decoded (with '-'s) form (bsc#1135819) - 21.65 ==== insserv-compat ==== - fix handling of ,start= parameters (bsc#1133306) ==== libimagequant ==== - Add gcc9-Update-const-var-openmp-const-var-handling.patch in order to handle boo#1134979. ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-base-drivers-firebird libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit - If there is no firebird engine we still need java to run hsqldb bsc#1135189 - LO-L3: PPTX: Rectangle turns from green to blue and loses transparency when transparency is set * bsc1135228.patch ==== libssh ==== - Add support for new AES-GCM encryption types; (bsc#1134193) * Add 0001-libcrypto-Implement-OpenSSH-compatible-AES-GCM-ciphe.patch * Add 0001-libgcrypt-Implement-OpenSSH-compatible-AES-GCM-ciphe.patch * Add 0001-tests-Add-aes-gcm-ciphers-tests.patch ==== libvirt ==== Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-gluster libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - spec: add systemd-container dependency to qemu and lxc drivers bsc#1136109 ==== perl-Mojolicious ==== Version update (8.16 -> 8.17) - updated to 8.17 see /usr/share/doc/packages/perl-Mojolicious/Changes 8.17 2019-05-23 - Fixed a bug in Mojo::UserAgent where the request timeout would not work for keep-alive requests. (ilmari) ==== pmdk ==== Version update (1.5 -> 1.6) Subpackages: libpmem1 - Disable Werror to deal with a new GCC 9 warning. - Update to PMDK 1.6 (jsc#SLE-5400) - See ChangeLog for details ==== python-ipy ==== Version update (0.83 -> 1.00) - version update to 1.00 * Fix IPv6 string interpretation for small ints * Various Python3 language fixes * consider 127.0 range LOOPBACK not PRIVATE ==== python-pycryptodome ==== Subpackages: python2-pycryptodome python3-pycryptodome - Use -fno-strict-aliasing in order to bypass: https://github.com/Legrandin/pycryptodome/issues/291. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0