November 2017 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] wifi issue with TW snapshot 20171119
by Robby Engelmann 20 Nov '17

20 Nov '17

Please find more information here: https://bugzilla.novell.com/show_bug.cgi? id=1068838 --

5 8

[opensuse-factory] Konsole cursor bug on Nvidia GTX 1050 Ti
by Bjoern Voigt 20 Nov '17

20 Nov '17

I upgraded my graphics card to a Nvidia GTX 1050 Ti on my TW system. I use the Nvidia driver 384.90 from the TW Nvidia repository. Unfortunately I can't use Konsole with Vi anymore. If I move the cursor fast, then the cursor image did not get cleaned correctly. You can see the problem here: https://paste.opensuse.org/46142803 The file is empty, but you see several "_" chars from the former cursor positions. I didn't had this problem with the Nvidia GTX 750 card. Any ideas how to fix or work-… [View More]

4 8

[opensuse-factory] KMPs fail to build lately
by Christos Gourdoupis 19 Nov '17

19 Nov '17

I have noticed that many kernel module packages fail to build after a recent (kernel?) update. The relevant message in the log is: /usr/src/linux-4.13.11-1/Makefile:942: *** "Cannot generate ORC metadata for CONFIG_ORC_UNWINDER=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel". Stop. What is the recommended course of action? insert 'BuildRequires libelf-devel' to spec or wait for %kernel_module_package_buildreqs to be updated? -- To unsubscribe, e-mail: opensuse-… [View More]

6 5

[opensuse-factory] iptables active while SuSEfirewall2 is stopped/disabled?
by Wayne Patton 19 Nov '17

19 Nov '17

I have two NAT networks (192.168.122.0 & 192.168.124.0) setup in KVM with a VM on each network. I can communicate between the VM's only one way and not the other, both ssh and ping. I found that after I reboot, I have iptables rules active even though systemctl status SuSEfirewall2 shows off/disabled. If I flush the rules (iptables -F) then the VM's can communicate both ways like I expect. If I start & stop SuSEfirewall2 then the iptables rules are gone, the same behavior as after I … [View More]flush the rules. However on reboot, the iptables rules are active again even though the firewall is disabled. Output below shows the rules after a boot, and the rules after turning the firewall on and off. How can I disable the rules all together? host:~ # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.124.0/24 ctstate RELATED,ESTABLISHED ACCEPT all -- 192.168.124.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject- with icmp-port-unreachable REJECT all -- anywhere anywhere reject- with icmp-port-unreachable ACCEPT all -- anywhere 192.168.122.0/24 ctstate RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject- with icmp-port-unreachable REJECT all -- anywhere anywhere reject- with icmp-port-unreachable ACCEPT all -- anywhere 192.168.126.0/24 ctstate RELATED,ESTABLISHED ACCEPT all -- 192.168.126.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject- with icmp-port-unreachable REJECT all -- anywhere anywhere reject- with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:bootpc ACCEPT udp -- anywhere anywhere udp dpt:bootpc ACCEPT udp -- anywhere anywhere udp dpt:bootpc host:~ # systemctl status SuSEfirewall2 ● SuSEfirewall2.service - SuSEfirewall2 phase 2 Loaded: loaded (/usr/lib/systemd/system/SuSEfirewall2.service; disabled; vendor preset: disabled) Active: inactive (dead) host:~ # systemctl start SuSEfirewall2 host:~ # systemctl stop SuSEfirewall2 host:~ # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination yoda:~ # [View Less]

3 4

[opensuse-factory] Firefox 57 High CPU Usage
by Frank Krüger 19 Nov '17

19 Nov '17

Hi there, Since a couple of days I am experiencing high CPU usage with Firefox 57 up to 100 %, even on "plain websites" and in Safe Mode. This did not happen before with the beta version. Anyone else seeing this issue? Regards, Frank -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] manpages.opensuse.org
by Cameron Seader 18 Nov '17

18 Nov '17

Greetings, Online Manual pages sure is a nice thing. Some widely known good ones are man.freebsd.org, die.net, manpagez.com, manpages.ubuntu.com. It would be nice if we had online man pages such as the ones like the ubuntu manpages. It helps in cases like the kubic project where the man pages are not installed into the MicroOS. There are many other examples of why this might be useful. This would also direct google searches over our way as well. Is there any way in which we could make … [View More]

2 1

[opensuse-factory] Missing kernel modules for VirtualBox
by Larry Finger 17 Nov '17

17 Nov '17

On 11/13/2017 12:20 PM, Dominique Leuenberger wrote: In the E-mail with subject "New Tumbleweed snapshot 20171112 released!", we see the following: > Packages changed: ... > kernel-source (4.13.11 -> 4.13.12) ... As noted, the kernel after updating will be 4.13.12; however, the VirtualBox kernel modules in the repos are for kernel 4.13.10. Accordingly, if you update either a Tumbleweed guest or host, the kernel modules will not be available. In a host, you will be unable to … [View More]

8 14

[opensuse-factory] New Tumbleweed snapshot 20171116 released!
by Dominique Leuenberger 17 Nov '17

17 Nov '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a … [View More]

1 0

[opensuse-factory] Tumbleweed - Review of the week 2017/46
by Dominique Leuenberger / DimStar 17 Nov '17

17 Nov '17

Dear Tumbleweed users and hackers, While a lot of people were having fun during openSUSE’s Hackweek 0x10 (Edition 16), Tumbleweed kept on rolling (mostly) – and I am sure we will soon see the various fruits from this hackweek. SUSE engineers having fun does not equate with fewer changes in Tumbleweed: there have been 7 snapshots released since my last review (1109, 1111, 1112, 1113, 1114, 1115 and 1116, which hit the mirrors just moments ago) The list of changes is as you expect: overwhelming.… [View More]

1 0

[opensuse-factory] Hackweek project: encrypted installation media
by Steffen Winterfeldt 17 Nov '17

17 Nov '17

Hi, - You’re still carrying around your precious autoyast config files on an unencrypted usb stick? - You have a customized installation disk that could reveal lots of personal details? - You use ad blockers, private browser tabs, or even tor but still carry around your install or rescue disk unencrypted for everyone to see? - You have your personal files and an openSUSE installation tree on the same partition just because you are lazy and can’t be bothered to tidy things up? … [View More]

1 0

[opensuse-factory] Noto font misses dot over Ukrainian і in interface
by Mykola Krachkovsky 17 Nov '17

17 Nov '17

Hi, After recent update all fonts of Noto family (Noto Sans, Noto Serif, etc) miss dot over Cyrillic і which is widely used in Ukrainian (and Belarusian) so text now looks ugly. And that problem present in interface of both Qt and Gtk applications, QtWebEngine, Chromium, FireFox and doesn't depend on text size. But if open font file (/usr/share/fonts/truetype/NotoSans-Regular.ttf) with FontForge or KFontView dot is where it should be. Other chars or fonts (Google and not) aren't affected … [View More]

3 5

[opensuse-factory] New Tumbleweed snapshot 20171115 released!
by Dominique Leuenberger 16 Nov '17

16 Nov '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a … [View More]specific problem. Packages changed: alsa-tools audit (2.7.7 -> 2.8.1) audit-secondary (2.7.7 -> 2.8.1) bzip2 glibc glibc icedtea-web make pam perl-MIME-Types (2.13 -> 2.14) python-ldap (2.4.45 -> 2.5.1) shadow === Details === ==== alsa-tools ==== - Eliminate a few rpmlint warnings: + ld10k-devel should require ld10k versioned. + Do not package empty ChangeLog files. - Update to alsa-tools 1.1.5: * echomixer: obsolete usage of dimension information * as10k1: Drop superfluous inline prefix ==== audit ==== Version update (2.7.7 -> 2.8.1) Subpackages: audit-devel libaudit1 libaudit1-32bit libauparse0 - Update to version 2.8.1 release (includes 2.8 and 2.7.8 changes) * many features added to auparse_normalize * cli option added to auditd and audispd for setting config dir * in auditd, restore the umask after creating a log file * option added to auditd for skipping email verification - Full changelog: http://people.redhat.com/sgrubb/audit/ChangeLog ==== audit-secondary ==== Version update (2.7.7 -> 2.8.1) - Rename python binding packages to match current python packaging standards - Update python build dependencies to resolve future split of python2/3 - Update to version 2.8.1. See audit.spec (libaudit1) for upstream changelog - Remove audit-implicit-writev.patch (fixed upstream across 2 commits) * 3b30db20ad983274989ce9a522120c3c225436b3 * 07132c22314e9abbe64d1031fd8734243285bb3f - Cleanup with spec-cleaner ==== bzip2 ==== Subpackages: libbz2-1 libbz2-1-32bit libbz2-devel - Fix build on Fedora and Mageia - Update bzip2-1.0.6-autoconfiscated.patch: * Bump version to 1.0.6. * Fix script symlinks on platforms with EXEEXT. ==== glibc ==== Subpackages: glibc-32bit glibc-locale-32bit - spawni-assert.patch: Fix improper assert in Linux posix_spawn (BZ [#22273]) - math-c++-compat.patch: Add more C++ compatibility (BZ #22296) - malloc-tcache-leak.patch: Fix tcache leak after thread destruction (BZ [#22111]) - falkor-memcpy-memmove.patch: Optimized implementation of memcpy/memmove for Qualcomm Falkor - aarch64-cpu-features.patch: Fix glibc.tune.cpu tunable handling - nss-files-large-buffers.patch: Avoid large buffers with many host addresses (BZ #22078) - sysconf-uio-maxiov.patch: Fix missing definition of UIO_MAXIOV (BZ [#22321]) - glob-tilde-overflow.patch: Fix buffer overflows with GLOB_TILDE (CVE-2017-15670, CVE-2017-15671, CVE-2017-15804, bsc#1064569. bsc#1064580, bsc#1064583, BZ #22320, BZ #22325, BZ #22332) - dl-runtime-resolve-xsave.patch: Use fxsave/xsave/xsavec in _dl_runtime_resolve (BZ #21265) ==== glibc ==== Subpackages: glibc-devel glibc-extra glibc-info glibc-locale nscd - spawni-assert.patch: Fix improper assert in Linux posix_spawn (BZ [#22273]) - math-c++-compat.patch: Add more C++ compatibility (BZ #22296) - malloc-tcache-leak.patch: Fix tcache leak after thread destruction (BZ [#22111]) - falkor-memcpy-memmove.patch: Optimized implementation of memcpy/memmove for Qualcomm Falkor - aarch64-cpu-features.patch: Fix glibc.tune.cpu tunable handling - nss-files-large-buffers.patch: Avoid large buffers with many host addresses (BZ #22078) - sysconf-uio-maxiov.patch: Fix missing definition of UIO_MAXIOV (BZ [#22321]) - glob-tilde-overflow.patch: Fix buffer overflows with GLOB_TILDE (CVE-2017-15670, CVE-2017-15671, CVE-2017-15804, bsc#1064569. bsc#1064580, bsc#1064583, BZ #22320, BZ #22325, BZ #22332) - dl-runtime-resolve-xsave.patch: Use fxsave/xsave/xsavec in _dl_runtime_resolve (BZ #21265) ==== icedtea-web ==== Subpackages: icedtea-web-javadoc - Bumped by mistake build requirement, bump it back. Build with java-devel >= 1.8 ==== make ==== Subpackages: make-lang - glob-lstat.patch: Do not assume glibc glob internals ==== pam ==== Subpackages: pam-32bit pam-devel - Prerequire group(shadow), user(root) ==== perl-MIME-Types ==== Version update (2.13 -> 2.14) - updated to 2.14 see /usr/share/doc/packages/perl-MIME-Types/ChangeLog version 2.14: Wed 8 Nov 17:45:22 CET 2017 Fixes: - MojoX should not die on missing types. rt.cpan.org#123298 [Dmitry Latin] ==== python-ldap ==== Version update (2.4.45 -> 2.5.1) - update to upstream release 2.5.1 - adjusted BuildRequires to match upstream prerequisites Changes since 2.4.45: Mandatory prerequisites: - Python 2.7.x - pyasn1 0.3.7+ and pyasn1_modules 0.1.5+ Modules/ * removed unused code schema.c Lib/ * ldap.__version__, ldap.__author__ and ldap.__license__ now imported from new sub-module ldap.pkginfo also to setup.py * Added safety assertion when importing _ldap: ldap.pkginfo.__version__ must match _ldap.__version__ * removed stand-alone module dsml * slapdtest.SlapdObject.restart() just restarts slapd without cleaning any data * Compability changes for pyasn1 0.3.x or newer (thanks to Ilya Etingof and Christian Heimes) * The methods SSSResponseControl.decodeControlValue() and VLVResponseControl.decodeControlValue() now follow the coding convention to use camel-cased ASN.1 name as class attribute name. The old class names are still set for back-ward compability but should not be used in new code because they might be removed in a later release. * removed SSSRequestControl from ldap.controls.KNOWN_RESPONSE_CONTROLS Tests/ * added explicit reconnect tests for ReconnectLDAPObject ==== shadow ==== - bsc#1061838: Revert: Requires: group(mail) Introduced circular dependency -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org [View Less]

2 2

[opensuse-factory] Bulk renaming of "README.SuSE"
by Stefan Seyfried 16 Nov '17

16 Nov '17

Hi all, Dominique is cleaning up packages and renaming "README.SuSE" files to "README.SUSE". While this is of course warrented in principle, there is one case to consider. If the README.SuSE is hugely outdated, then the wrong spelling at least suggest that it is not new ;-) My example is the ifplugd package. I actually would not have expected anyone to still use this, but there was a bugreport, so I recently added a trivial patch to increase a netlink buffer size. Looking at README.SuSE (… [View More]

13 30

Re: [opensuse-factory] Leap 15 status update 20171110
by mrmazda＠earthlink.net 16 Nov '17

16 Nov '17

Basil Chupin composed on 12 Nov 2017 09:01:45 (+1100): > Felix Miata wrote: >> Very broken for me. No zypper is very bad: >> https://bugzilla.opensuse.org/show_bug.cgi?id=1067737 >> Is there any possibility to fix what I have rather than starting all over (and >> arriving in the same place unless first something is fixed)? > Zypper is working perfectly for me. On a freshly made upgrade from 42.x like I tried to do? If yes, with which DE(s)? I had to remove a … [View More]

18 44

Re: [opensuse-factory] kde apper / updater
by nicholas cunliffe 16 Nov '17

16 Nov '17

I agree that TW aware i.e. implement dup in updater, would be the best. Failing this however it should be installed but disabled. 1) i disagree that it is useful for notification of new packages, there are always (over the course of a few days) new packages on tumbleweed. Your trying to sell an icy conditions alerter for eskimos. 2) since apper is based on up, does it actually give the correct and complete list of pending updates? (i havn't checked) 3) i disagree that this is somehow the fault … [View More]

2 1

[opensuse-factory] New Tumbleweed snapshot 20171114 released!
by Dominique Leuenberger 15 Nov '17

15 Nov '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a … [View More]specific problem. Packages changed: Mesa (17.2.4 -> 17.2.5) babl (0.1.30 -> 0.1.34) build (20171023 -> 20171027) deltarpm doxygen enca (1.16 -> 1.19) expect (5.45 -> 5.45.3) fetchmail fontconfig (2.12.4 -> 2.12.6) gdb git glew (2.0.0 -> 2.1.0) gpg2 (2.2.1 -> 2.2.2) gpgme gstreamer-plugins-bad gtk4 (3.91.2 -> 3.92.1) hdf5 (1.10.0 -> 1.10.1) icedtea-web ifplugd installation-images-Kubic (14.339 -> 14.340) libinput (1.9.0 -> 1.9.1) liblogging libpsl (0.18.0 -> 0.19.1) libreoffice libserf libsmbios libxml2 (2.9.5 -> 2.9.7) libxslt (1.1.30 -> 1.1.32) libxslt-python (1.1.30 -> 1.1.32) lzop (1.03 -> 1.04) mercurial (4.4 -> 4.4.1) newt obs-service-set_version opencc opusfile (0.8 -> 0.9) parcellite (1.1.9 -> 1.2.1) patterns-base patterns-xfce (20170319 -> 20171113) pciutils (3.5.4 -> 3.5.5) perl-Crypt-SSLeay perl-Set-Object (1.36 -> 1.38) pesign-obs-integration poppler (0.57.0 -> 0.59.0) poppler-qt5 (0.57.0 -> 0.59.0) presage publicsuffix (20170910 -> 20171028) python-libxml2-python (2.9.5 -> 2.9.7) rdma-core re2c (1.0.2 -> 1.0.3) rp-pppoe samba (4.7.0+git.23.4e3f0fb9d15 -> 4.7.1+git.26.1ac2944c965) swig systemd-rpm-macros texlive tslib (1.11 -> 1.13) virtualbox wavpack (4.60.99 -> 5.1.0) xscreensaver yast2-python-bindings (3.1.1 -> 4.0.0) yp-tools ypbind === Details === ==== Mesa ==== Version update (17.2.4 -> 17.2.5) Subpackages: Mesa-dri-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libGL-devel Mesa-libGL1 Mesa-libglapi0 Mesa-libva libgbm1 libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_radeon libwayland-egl1 libxatracker2 - update to 17.2.5 * In Core, a GL error related to the ARB_ES3_1_compatibility spec noticed with the GFXBench 5 Aztec Ruins has been corrected. * The GLSL compiler is not giving a linker error for mismatching uniform precision with GLSL ES 1.00 any more. This enables, specially, several Android applications which violate this rule, e.g., Forge of Empires. * The SPIR-V compiler has corrected an assert triggered when support for the simple memory model was claimed. * NIR has also received a correction related with gl_SubGroupG{e,t}MaskARB. * Intel drivers, specially i965, got several fixes, including a plug for a memory leak and another one in the compiler to avoid GPU hangs on Broxton. * The gallium i915g driver for Intel has seen an important fix. * AMD drivers (mostly radv) have received several fixes, including a correction for a DCC corruption that was visible with Rust, breaking an endless loop in r600, avoiding a GPU hang with vulkan dota2 in VR mode and a plug for a memory leak. * Broadcom's vc4 gotten a fix to exclude some code that shouldn't be there in release builds. ==== babl ==== Version update (0.1.30 -> 0.1.34) - Update to version 0.1.34: + Brown paper bag release + Fix indexed / custom primaries conflict + Re-export a symbol used by old GEGL/GIMPs - Changes from version 0.1.32: + Added custom primaries and TRC support through ICC parsing + Improved float<->half performance + Rewrite of all conversions functions to adhere to new signature ==== build ==== Version update (20171023 -> 20171027) Subpackages: build-mkbaselibs build-mkdrpms - fixes syntax error fissile support - various container handling improvements - support new debian control.tar.xz files ==== deltarpm ==== - Correct provides/obsoletes for python2 subpackage - Build python3 bindings as well - Rename python2 subpackage to name consistent with current python packaging - Drop patch.sles8 - there does not seem to be any reason for it ==== doxygen ==== - Update licensing information - Explicitly require python2 for building - Use more cmake macros - Run spec-cleaner ==== enca ==== Version update (1.16 -> 1.19) - update to version 1.19 + fix possible memory leak + make utf-8 detection work even on one character - includes changes from 1.18 + fix installation of devhelp documentation - includes changes from 1.17 + Fixed conversion of GB2312 encoding with iconv + Fixed iconv conversion on OSX + Fixed execution of external converters with ACLs + Documentation improvements - cleanup with spec-cleaner - use %make_install macro - list binaries and man pages explicitly ==== expect ==== Version update (5.45 -> 5.45.3) - New version 5.45.3: * expect.c: On finding a full buffer during matching the sliding window mechanism slides too far, truncating the whole buffer and preventing matches across the boundary. Fix is shortening the slide distance (slide only one 1/3). * expect.c: Replaced a cc==0 check with proper Tcl_Eof() check. - Includes changes from 5.45.2: * configure: Extended Tcl header detection for OS X Mountain Lion. * expect.c: Replaced memcpy with memmove to properly handle overlapping memory. - Includes changes from 5.45.1: * exp_chan.c: Fix a problem when talking a tty where the writer dies. Some operating systems report the condition as EIO with nothing read, while this actually an EOF. Previously, returned data was incomplete due to the error causing data in buffers to be dropped. * exp_chan.c: Fix a problem with the iteration over the expect channel list where the loop code may modify the list, breaking the iterator. * Fixes for exp_chan.c and exp_command.h * expect.c: Convert #bytes information to #chars to prevent later code to fail when copying strings around and miscalculating how much to copy, for strings containing non-ASCII utf chars. * exp_inter.c: Hack access to TCL_REG_BOSONLY when not present, became private with Tcl 8.5 and higher. * expect.h: Remove the local fiddling with the memory allocation and panic macros. * example/unbuffer: Prevent unbuffer from swallowing exit code of the command it ran (regular mode only, not -p) * Various deduplications and cleanups - cleanup with spec-cleaner - use %make_install macro ==== fetchmail ==== - drop SSLv3 support to build with openssl 1.1 (bsc#1066940) * add fetchmail-openssl11.patch ==== fontconfig ==== Version update (2.12.4 -> 2.12.6) Subpackages: fontconfig-32bit fontconfig-devel - Update to 2.12.6: * conf.d: Drop aliases for (URW)++ fonts (upstreamed) * other minor fixes - Includes changes from 2.12.5: * update docs * Accept 4 digit script tag in FcLangNormalize(). * fc-blanks: fall back to the static data available in repo if downloaded data is corrupted * emoji related fixes * various cleanups * support listing named instances ==== gdb ==== - switch to Python 3 for Tumbleweed 1320 and up - Remove %clean section. ==== git ==== Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - Build with the external libsha1detectcoll (bsc#1042644) ==== glew ==== Version update (2.0.0 -> 2.1.0) - Update to 2.1.0 * Enhancements: + OpenGL 4.6 support added + Improved cmake build support + Improved Mac OSX build support * Bug fixes: + Resovled crash when glXGetCurrentDisplay() is NULL + CMake: only install PDB files with MSVC + wglGetProcAddress crash with NOGDI defined + Mac: using -Os rather than -O2 * 33 new extensions - move to github - new so_ver ==== gpg2 ==== Version update (2.2.1 -> 2.2.2) Subpackages: gpg2-lang - GnuPG 2.2.2: * gpg: Avoid duplicate key imports by concurrently running gpg processes * gpg: Fix creating on-disk subkey with on-card primary key * gpg: Fix validity retrieval for multiple keyrings * gpg: Fix --dry-run and import option show-only for secret keys * gpg: Print "sec" or "sbb" for secret keys with import option import-show * gpg: Make import less verbose * gpg: Add alias "Key-Grip" for parameter "Keygrip" and new parameter "Subkey-Grip" to unattended key generation * gpg: Improve "factory-reset" command for OpenPGP cards * gpg: Ease switching Gnuk tokens into ECC mode by using the magic keysize value 25519 * gpgsm: Fix --with-colon listing in crt records for fields > 12. * gpgsm: Do not expect X.509 keyids to be unique * agent: Fix stucked Pinentry when using --max-passphrase-days * agent: New option --s2k-count * dirmngr: Do not follow https-to-http redirects * dirmngr: Reduce default LDAP timeout from 100 to 15 seconds * gpgconf: Ignore non-installed components for commands - -apply-profile and --apply-defaults * Add configure option --enable-werror ==== gpgme ==== Subpackages: libgpgme-devel libgpgme11 libgpgmepp6 libqgpgme7 - Make python package naming consistent with python singlespec ==== gstreamer-plugins-bad ==== Subpackages: gstreamer-plugins-bad-lang libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbadbase-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstgl-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgsturidownloader-1_0-0 libgstwayland-1_0-0 - Disable %glib2_gsettings_schema_post/postun scriptlets on suse_version >= 1330: this functionality is now covered by file triggers and the macros expand to %nil. - Enable gobject introspection bindings: + Add gobject-introspection-devel BuildRequires: allow the build system to find the needed infrastructure. + Pass --enable-introspection to configure: enable the introspection support. + Split out new typelib- packages: - typelib-1_0-GstBadAllocators-1_0 - typelib-1_0-GstGL-1_0 - typelib-1_0-GstInsertBin-1_0 - typelib-1_0-GstMpegts-1_0 - typelib-1_0-GstPlayer-1_0 - Move pkgconfig(mjpegtools) BuildRequires to orig-addon: mplex without mpeg2enc support is pointless, so keep those two in the same build conditional. ==== gtk4 ==== Version update (3.91.2 -> 3.92.1) - Update to version 3.92.1: + Drop autotools support. Meson 0.42.1 is now required + Implement most of CSS3 font-variant + Add an Emoji chooser to GtkEntry + Add new input hints for Emoji input + Remaining widgets have been ported to GtkSnapshot + GtkLabel and GtkEntry have been ported to use GSK + Add a way for GtkOverlay to blur behind children. This is has a demo in gtk4-demo + Add support for native file choosers on older OS X versions + Add support for libcloudproviders in GtkPlacesSidebar + Non-windowed widgets are now allowed to have a size of 0x0 + Allow tiled windows to be resized. Under wayland, this uses version 2 of the gtk-shell protocol. Under X, it uses the _GTK_EDGE_CONSTRAINTS property + Input handling changes - GdkEvent has new accessors for fields - Traditional event signals (eg ::key-press-event) are now emitted from an event controller - Most widgets inside gtk have stopped using traditional event signals - GDK_SEAT_CAPABILITY_ALL_POINTING now includes touch events + Scrollbars allow middle-click to jump to a position again + Bugs fixed: bgo#639931, bgo#644248, bgo#701296, bgo#705640, bgo#728452, bgo#763517, bgo#766909, bgo#773299, bgo#775074, bgo#775126, bgo#778382, bgo#778811, bgo#780750, bgo#780758, bgo#781757, bgo#782981, bgo#783649, bgo#783669, bgo#784016, bgo#784421, bgo#785210, bgo#785306, bgo#785736, bgo#786144, bgo#786209, bgo#786400, bgo#786469, bgo#786485, bgo#786492, bgo#786553, bgo#786613, bgo#786673, bgo#786794, bgo#786885, bgo#786931, bgo#786932, bgo#786938, bgo#786940, bgo#786956, bgo#786960, bgo#786964, bgo#786966, bgo#787021, bgo#787103, bgo#787172, bgo#787279, bgo#787302, bgo#787303, bgo#787410, bgo#787416, bgo#787444, bgo#787531, bgo#787600, bgo#787669, bgo#787757, bgo#787866, bgo#788230, bgo#788458, bgo#788534, bgo#788573, bgo#788614, bgo#788787, bgo#788905. + Updated translations. - Add meson BuildRequires and replace configure/make/make_install calls with meson/meson_build and meson_install: follow upstreams port to meson as build system. - Add gcc-c++ BuildRequires: small parts of GTK+ now are written in C++. - Add gtk-doc BuildRequires: in order to build man-pages, documentation needs to be enabled, which in turn requires gtk-doc. In the past, we provided upstream shipped documentation. - Add gtk4-return-nonvoid.patch: Fix 'reaches end of non-void function without return value', taken from git. - Add rpmlintrc: multiple GTK4 libraries are not goint to be supported in parallel and the name will stabilize. ==== hdf5 ==== Version update (1.10.0 -> 1.10.1) - Update to 1.10.1: https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.1/src/hd… - Fix-warnings-for-missing-returns.patch: replace: hdf5-non_void_return.patch - PPC64LE-Fix-long-double-handling.patch: replace: hdf5-ldouble-ppc64le.patch - Disable-phdf5-tests.patch: replace: hdf5_disable_testphdf5.patch - Disabling validation tests for the MPI variant for now as they seem to cause issues in OBS. ==== icedtea-web ==== Subpackages: icedtea-web-javadoc - Added patch: * icedtea-web-jdk10.patch + Allow build/run with jdk10 ==== ifplugd ==== - Rename README.SuSE to README.SUSE, adhering to the correct spelling. - add ifplugd-nlapi-increase-packetsize.diff [bsc#1030382] - small spec-file cleanups to reduce rpmlint warnings ==== installation-images-Kubic ==== Version update (14.339 -> 14.340) - merge gh#openSUSE/installation-images#210 - include modules from kernel/drivers/phy (bsc#1064128) - 14.340 ==== libinput ==== Version update (1.9.0 -> 1.9.1) Subpackages: libinput-udev libinput10 - Update to version 1.9.1: + Stop a crash when a lid was opened/closed multiple times while typing. + Reduction of the palm edge zone to a maximum width of 8mm (this notably helps users of recent macs that have large touchpads) + Benjamin's fix to the device groups enables touch arbitration on the Dell Canvas 27 (still needs libwacom changes) - Remove name specification from %setup, not needed ==== liblogging ==== - Use python3 version of rst2man when available - Run spec-cleaner ==== libpsl ==== Version update (0.18.0 -> 0.19.1) - update to 0.19.1: * New function psl_free_string() * psl_make_dafsa now works with python2 and python3 * psl_*count() functions now return -1 if info is not available * Fixed unsigned integer overflow in _mem_is_ascii() * Add -fsanitize-address-use-after-scope to --enable-asan if available ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreofficekit - Disable the verbosity of the build again, getting complaints of build log is too long... - Switch to bundled gpgme on old distros where it is not possible to update - Rebase scp2-user-config-suse.diff to apply again - Fix pyuno paths wrt bsc#1059720 ==== libserf ==== Subpackages: libserf-1-1 libserf-devel - Add libserf-python3.patch and libserf-python3-2.patch to fix building with python3 ==== libsmbios ==== Subpackages: python-smbios smbios-utils-python - Do not store build logs in the package to make the package build result reproducible ==== libxml2 ==== Version update (2.9.5 -> 2.9.7) Subpackages: libxml2-2 libxml2-2-32bit libxml2-devel libxml2-tools - Version update to 2.9.7 release: * Bug Fixes: + xmlcatalog: restore ability to query system catalog easily + Fix comparison of nodesets to strings * Improvements: + Add Makefile rules to rebuild HTML man pages + Remove generated file python/setup.py from version control + Fix mixed decls and code in timsort.h + Rework handling of return values in thread tests + Fix unused variable warnings in testrecurse + Fix -Wimplicit-fallthrough warnings + Upgrade timsort.h to latest revision + Fix a couple of warnings in dict.c and threads.c + Fix unused variable warnings in nanohttp.c + Don't include winsock2.h in xmllint.c + Use __linux__ macro in generated code * Portability: + Add declaration for DllMain + Fix preprocessor conditional in threads.h + Fix macro redefinition warning + many Windows specific improvements * Documentation: + xmlcatalog: refresh man page wrt. quering system catalog easily - Includes bug fixes from 2.9.6: * Fix XPath stack frame logic * Report undefined XPath variable error message * Fix regression with librsvg * Handle more invalid entity values in recovery mode * Fix structured validation errors * Fix memory leak in LZMA decompressor * Set memory limit for LZMA decompression * Handle illegal entity values in recovery mode * Fix debug dump of streaming XPath expressions * Fix memory leak in nanoftp * Fix memory leaks in SAX1 parser - Drop libxml2-bug787941.patch * upstreamed in 3157cf4e53c03bc3da604472c015c63141907db8 ==== libxslt ==== Version update (1.1.30 -> 1.1.32) Subpackages: libxslt-devel libxslt-tools libxslt1 - Update to version 1.1.32 * fixes xml-config detection regression (boo#1066525) ==== libxslt-python ==== Version update (1.1.30 -> 1.1.32) - Update to version 1.1.32 * fixes xml-config detection regression (boo#1066525) ==== lzop ==== Version update (1.03 -> 1.04) - Use cmake for building - Run tests during build - update to 1.0.4: * Added CMake build support * Assorted minor updates - clean with spec-cleaner - remove patches * lzop-1.03-gcc5_ppc64.patch * lzop-1.03-gcc6.patch ==== mercurial ==== Version update (4.4 -> 4.4.1) Subpackages: mercurial-lang - Mercurial 4.4.1 1. Notable changes * Git and Subversion subrepos have been disabled by default to mitigate a potential security risk if files overlapping with a subrepo managed to be committed to a repository. * Subrepos are now more paranoid about symlink traversal. * The share extension handles drive letters on Windows better. It is possible that a specially malformed repository can cause Git subrepositories to run arbitrary code in the form of a .git/hooks/post-update script checked in to the repository in Mercurial 4.4 and earlier. Typical use of Mercurial prevents construction of such repositories, but they can be created programmatically. ==== newt ==== - Use current factory dependencies - Always build python3 bindings - Small cleanup with spec-clenaer ==== obs-service-set_version ==== - add requires to python3, since Leap 15.0 still does not have the fileprovides - Update to version 0.5.7: * added gitignore * added target 'clean' in Makefile * Added new target 'test' to Makefile * fix flake8 error 'do not use bare except' * Reverting patch for setlocale as it breaks in containers ==== opencc ==== Subpackages: libopencc2 opencc-data - Cleanup spec file a bit - Use more of cmake macros ==== opusfile ==== Version update (0.8 -> 0.9) - Update to version 0.9: + Fix an invalid free with tag handling. + Improve handling of corrupt streams. + Improve performance on streams with many chain segments. + Improve TLS host validation. + Align op_raw_total to work better with op_raw_seek. + Documentation and build improvements. ==== parcellite ==== Version update (1.1.9 -> 1.2.1) - new upstream version 1.2.1 * Implemented patch from Christopher Oliver that fixes a memory access bug on history clear. * Fixed minor missing fclose bug in save_history credits dcb. * Fixed bug 144, Clipboard text quoted for action commands. - changelog from 1.1.9 to 1.2.0 * Removed -d option. * Fixed bug 151, history clear not working. * Fixed bug 150, Command line examples not working. Note: parcellite must be running already. * Fixed bug 147, resource leak on history file. * Fixed bug 144, Clipboard text quoted for action commands. * Fixed bug 143, Parcellite fails to start as daemon. Also fixes Debian bug 785472. * Added TW_zh .po file. ==== patterns-base ==== Subpackages: patterns-base-apparmor patterns-base-apparmor_opt patterns-base-base patterns-base-basesystem patterns-base-console patterns-base-enhanced_base patterns-base-enhanced_base_opt patterns-base-minimal_base patterns-base-minimal_base_conflicts patterns-base-sw_management patterns-base-x11 patterns-base-x11_opt patterns-base-x86 - move plymouth from base to X11. No need to have a fancy boot splash that pulls in extra deps for a text console (boo#1066510) ==== patterns-xfce ==== Version update (20170319 -> 20171113) Subpackages: patterns-xfce-xfce patterns-xfce-xfce_basis patterns-xfce-xfce_laptop patterns-xfce-xfce_office - recommend polkit-gnome (bnc#1047500) ==== pciutils ==== Version update (3.5.4 -> 3.5.5) Subpackages: libpci3 pciutils-devel - Update to version 3.5.5 * Better decoding of AER capability. * "Slot Implemented" flag is decoded for PCI/PCI-X to PCIe bridges. * Minor fixes of decoding other capabilities. * As usual, updated pci.ids to the current snapshot of the database. - cleanup with spec-cleaner - switch from ftp to https - track signature ==== perl-Crypt-SSLeay ==== - Disable SSLv2/3 to fix build with OpenSSL 1.1 (bsc#1067188) * add Crypt-SSLeay-use_TLS_instead_of_SSL.patch ==== perl-Set-Object ==== Version update (1.36 -> 1.38) - updated to 1.38 see /usr/share/doc/packages/perl-Set-Object/Changes.pod =head1 1.38, 2017-11-11 =over =item * Add test_cover and release targets =back =head1 1.37, 2017-11-11 =over =item * Test fixes for -Ddefault_inc_excludes_dot, RT #120540 =item * Skip failing threads test <= 5.10.0 =item * Add CI hooks =back ==== pesign-obs-integration ==== - Modified modsign-repackage, using certificate to try to decrypt the signature of kernel module. It can be used to verify the integrity of signature. ==== poppler ==== Version update (0.57.0 -> 0.59.0) Subpackages: libpoppler-cpp0 libpoppler-devel libpoppler-glib8 poppler-tools - Update package summaries and RPM categorizations. - Drop some idempotent %if..%endif markers whose presence has no effect on the files being output. - Apply CVE-2017-14517.patch from upstream to fix a NULL pointer dereference in the XRef::parseEntry() function that may have lead to potential denial-of-service attack when handling malicious PDF files. [CVE-2017-14517, bsc#1059066] - Apply CVE-2017-14518.patch to remedy a floating point exception in Splash.cc that could have been exploited using a specially crafted PDF document. [CVE-2017-14518, bsc#1059101] - Update to version 0.59.0: + core: Fix infinite recursion in NameTree parsing in broken files. + utils: - pdfunite: Fix API porting error that caused abort in some cases. - pdfinfo: . Fix crashes and memory leaks when using -dests. . Use GooString.append instead of sprintf/strcat. - pdfimages: Fix warning when compiling with cygwin. + build system: - Fix cygwin 32-bit compile. - Cmake tweaks. - Bump soversion following upstream changes. - Update to version 0.58.0: + core: - CairoOutputDev: cairo 1.14 now has high quality downscaling. - Signature related improvements (fdo#99271). - Tweak which cmap we use (fdo#101855). - Memory leak fixes. - Substantial rework of the internals. - win32: call ANSI functions directly (fdo#100312). - Add some documentation. + qt5: - Expose signature information. - ArthurOutputDev: initialize the image with the paper color (fdo#102129). - Fix copy'n'paste bugs: Qt4 -> Qt5. - ArthurOutputDev: Properly set the QPainter transformation. - ArthurOutputDev: Use Qt::SvgMiterJoin instead of Qt::MiterJoin (fdo#102356). + utils: - pdfinfo: add -dests option to print named destinations (fdo#97262). - pdftocairo: add -jpegopt for setting jpeg compression parameters (fdo#45727). - pdftoppm: add -jpegopt for setting jpeg compression parameters (fdo#45727). - pdfimages: support listing/extracting inline images (fdo#25625). + build system: - cmake: Various Windows fixes. - cmake: Use -std=c++11 instead of -std=gnu++11. + cpp: Fix page.text() not taking page orientation into account (fdo#94517). - Bump soversion following upstream changes. ==== poppler-qt5 ==== Version update (0.57.0 -> 0.59.0) Subpackages: libpoppler-qt5-1 libpoppler-qt5-devel - Update package summaries and RPM categorizations. - Drop some idempotent %if..%endif markers whose presence has no effect on the files being output. - Apply CVE-2017-14517.patch from upstream to fix a NULL pointer dereference in the XRef::parseEntry() function that may have lead to potential denial-of-service attack when handling malicious PDF files. [CVE-2017-14517, bsc#1059066] - Apply CVE-2017-14518.patch to remedy a floating point exception in Splash.cc that could have been exploited using a specially crafted PDF document. [CVE-2017-14518, bsc#1059101] - Update to version 0.59.0: + core: Fix infinite recursion in NameTree parsing in broken files. + utils: - pdfunite: Fix API porting error that caused abort in some cases. - pdfinfo: . Fix crashes and memory leaks when using -dests. . Use GooString.append instead of sprintf/strcat. - pdfimages: Fix warning when compiling with cygwin. + build system: - Fix cygwin 32-bit compile. - Cmake tweaks. - Bump soversion following upstream changes. - Update to version 0.58.0: + core: - CairoOutputDev: cairo 1.14 now has high quality downscaling. - Signature related improvements (fdo#99271). - Tweak which cmap we use (fdo#101855). - Memory leak fixes. - Substantial rework of the internals. - win32: call ANSI functions directly (fdo#100312). - Add some documentation. + qt5: - Expose signature information. - ArthurOutputDev: initialize the image with the paper color (fdo#102129). - Fix copy'n'paste bugs: Qt4 -> Qt5. - ArthurOutputDev: Properly set the QPainter transformation. - ArthurOutputDev: Use Qt::SvgMiterJoin instead of Qt::MiterJoin (fdo#102356). + utils: - pdfinfo: add -dests option to print named destinations (fdo#97262). - pdftocairo: add -jpegopt for setting jpeg compression parameters (fdo#45727). - pdftoppm: add -jpegopt for setting jpeg compression parameters (fdo#45727). - pdfimages: support listing/extracting inline images (fdo#25625). + build system: - cmake: Various Windows fixes. - cmake: Use -std=c++11 instead of -std=gnu++11. + cpp: Fix page.text() not taking page orientation into account (fdo#94517). - Bump soversion following upstream changes. ==== presage ==== Subpackages: libpresage1 presage-data - Drop obsolete and unused libgnome-devel BuildRequires: No longer needed. ==== publicsuffix ==== Version update (20170910 -> 20171028) - Update to version 20171028: * remove .htc TLD (#548) * Delete "REMOVED" TLDs (#536) * .br updated - 19 new 2nd level city domains (#546) ==== python-libxml2-python ==== Version update (2.9.5 -> 2.9.7) - clean with spec-cleaner ==== rdma-core ==== Subpackages: libibcm1 libibumad3 libibverbs libibverbs1 libmlx4-1 libmlx5-1 librdmacm1 rdma-core-devel rsocket - Backport upstream patches * bnxt_re-lib-fix-the-memory-barrier-call-during-poll-cq.patch Fix memory ordering issue * bnxt_re-lib-increment-psn-in-case-of-0-length-packets.patch Fix PSN getting out of sync when sending 0 length packet * verbs-Do-not-block-QP-attr_masks-used-by-older-kernels.patch Fix bits detection to allow RDMA CM to work on older kernsl - Refresh older patches to include commit logs: * ibacm-Incorrect-list-used-for-subnet-list-causes-a-segfault.patch * ibacm-Incorrect-usage-of-BE-byte-order-of-MLID-attach-detach_mcast.patch * libibumad-umad.c-In-get_port-ignore-sysfs-rate-file-errors.patch * libqedr-fix-inline-data-copy.patch - Add libibumad-umad.c-In-get_port-ignore-sysfs-rate-file-errors.patch * Fix issue with umad when QSFP is not plugged in (bnc#1058539) ==== re2c ==== Version update (1.0.2 -> 1.0.3) - Update to version 1.0.3: * Fixes build failure on Mac OS X 10.5.8 with gcc 4.2.1 * Documentation fix * 2 examples removed ==== rp-pppoe ==== - Refresh pppoe.spec via spec-cleaner. ==== samba ==== Version update (4.7.0+git.23.4e3f0fb9d15 -> 4.7.1+git.26.1ac2944c965) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr0 libndr0-32bit libnetapi0 libnetapi0-32bit libsamba-credentials0 libsamba-credentials0-32bit libsamba-errors0 libsamba-errors0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-policy0 libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient-devel libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap2 libsmbldap2-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-client samba-client-32bit samba-doc samba-dsdb-modules samba-kdc samba-kdc-32bit samba-libs samba-libs-32bit samba-python samba-winbind samba-winbind-32bit - Run all daemons in the foreground and let systemd handle it; (bsc#1065551). - Update to 4.7.1; + Fix exporting subdirs with shadow_copy2; (bso#13091); + Currently if getwd() fails after a chdir(), we panic; (bso#13027); + Ensure default SMB_VFS_GETWD() call can't return a partially completed struct smb_filename; (bso#13068); + sys_getwd() can leak memory or possibly return the wrong errno on older systems; (bso#13069); + smbclient doesn't correctly canonicalize all local names before use; (bso#13093); + Fix broken linked attribute handling; (bso#13095); + Missing LDAP query escapes in DNS rpc server; (bso#12994); + Link to -lbsd when building replace.c by hand; (bso#13087); + Cannot delete non-ACL files on Solaris/ZFS/NFSv4 ACL filesystem; (bso#6133); + Map SYNCHRONIZE acl permission statically in zfs_acl vfs module; (bso#7909); + Samba fails to honor SEC_STD_WRITE_OWNER bit with the acl_xattr module; (bso#7933); + Missing assignment in sl_pack_float; (bso#12991); + Wrong Samba access checks when changing DOS attributes; (bso#12995); + samba_runcmd_send() leaves zombie processes on timeout; (bso#13062); + groupmap cleanup should not delete BUILTIN mappings; (bso#13065); + Enabling vfs_fruit results in loss of Finder tags and other xattrs; (bso#13076); + man pages: Properly ident lists; (bso#9613); + smb.conf.5: Sort parameters alphabetically; (bso#13081); + Fix GUID string format on GetPrinter info; (bso#12993); + Remote serverid check doesn't check for the unique id; (bso#13042); + CTDB starts consuming memory if there are dead nodes in the cluster; (bso#13056); + ctdb-common: Ignore event scripts with multiple '.'s; (bso#13070); + libgpo doesn't sort the GPOs in the correct order; (bso#13046); + Remote serverid check doesn't check for the unique id; (bso#13042); + vfs_catia: Fix a potential memleak; (bso#13090); + Fix file change notification for renames; (bso#12903); + Samba DNS server does not honour wildcards; (bso#12952); + Can't change password in samba from a Windows client if Samba runs on IPv6 only interface; (bso#13079); + vfs_fruit: Replace closedir() by SMB_VFS_CLOSEDIR; (bso#13086); + Apple client can't cope with SMB2 async replies when creating symlinks; (bso#13047); + s4:rpc_server:backupkey: Move variable into scope; (bso#12959); + Fix ntstatus_gen.h generation on 32bit; (bso#13099); + Fix a double free in vfs_gluster_getwd(); (bso#13100); + Fix resouce leaks and pointer issues; (bso#13101); + vfs_solarisacl: Fix build for samba 4.7 and up; (bso#13049); ==== swig ==== - Run python2 and python3 tests for Factory ==== systemd-rpm-macros ==== - Remove a useless test in %service_add_pre() The test was placed where the condition '[ "$FIRST_ARG" -gt 1 ]' was always true. ==== texlive ==== - Add yet an other patch source-poppler-0.59.1.dif for poppler 0.59 and up (boo#1060652) ==== tslib ==== Version update (1.11 -> 1.13) - Update to version 1.13: * This release includes libts version 0.8.0 and the following changes: - Added ts_open_restricted() and ts_close_restricted() API - Added TSLIB_MT_VALID bit definition for ts_sample_mt's valid flag - module_raw galax is now disabled in the default configuration. Please use module_raw input instead. * Bugfixes - Changes for version 1.12: * This release includes libts version 0.7.2 and the following changes: - Generate a tracking ID value for multitouch type A devices - Add experimental --with-sdl2 configuration option for ts_calibrate and ts_test_mt * Bugfix ==== virtualbox ==== Subpackages: virtualbox-host-kmp-default virtualbox-qt - Update "fixes_for_leap15.patch" for wait queue API changes. - Add file "fixes_for_python.patch". - Modify "fixes_for_leap15.patch" to handle SKB_GSO_UDP API change. - Addresses VUL-0: CVE-2017-10392,CVE-2017-10407,CVE-2017-10408,CVE-2017-3733,CVE-2017-10428 as noted in bsc #1064200 ==== wavpack ==== Version update (4.60.99 -> 5.1.0) - Update to version 5.1.0 * new: command-line tagging utility (wvtag) * added: option to import ID3v2.3 tags from Sony DSF files * fixed: fuzz test failures from AFL reported on SourceForge * improved: DSD decimation filter (less HF rolloff & CPU use) * fixed: non-byte audio depths (12-bit, 20-bit) not showing * fixed: rare case of noise-shaping triggering a lossy mute * fixed: recognize UTF-8 BOM when reading text files * fixed: a few portability issues - Includes changes from 5.0.0: * new: input formats (RF64, Wave64, and CAF) * removed: support for legacy WavPack files (< 4.0) * added: lossless DSD audio in Philips DSDIFF and Sony DSF files * fixed: seeking in > 2GB WavPack files (new stream reader) * fixed: accept > 4GB source audio files (all formats) * improved: increase maximum samples from 2^32 to 2^40 * added: block checksums for robustness to corruption * added: support for non-standard channel identities * added: block decoder for streaming applications * added: new pdf documentation - For other changes, see upstream: * https://github.com/dbry/WavPack/blob/master/ChangeLog - cleanup with spec-cleaner - remove wavpack-fix_pkgconfig.patch, fixed upstream in: * d440649aa113797a50e94285c8c037dc2ad7a5a9 * 779a2e62783acc6a46f75dd89359e95079ef708a * 7846e95eb1c3fa97da41dfe96de532c2df5ad281 - remove license.txt, use upstream copying file instead - Drop Requires, Provides and Obsoletes, as the SUSE versions they were needed for are now EOL. ==== xscreensaver ==== Subpackages: xscreensaver-data xscreensaver-data-extra xscreensaver-lang - Fix requires for /sbin/unix2_chkpwd [bsc#1067103] ==== yast2-python-bindings ==== Version update (3.1.1 -> 4.0.0) - Rewrite the python bindings using swig fate#324146 ==== yp-tools ==== - Cleanup dangling symlinks after de-installation - Prepare for transactional update and read-only root filesystem - create /var/yp with tmpfiles.d ==== ypbind ==== - Fix cleanup of /var/yp/binding dirctory on de-installation - Use tmpfiles.d for /var/yp hierachy in preparation of read-only root filesystem and transactional-updates -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org [View Less]

1 0

[opensuse-factory] kde apper / updater
by nicholas cunliffe 15 Nov '17

15 Nov '17

can we 'por el amor de dios' get rid of the updater on TW? I have read at least 2 threads on the forums this week alone where people have broken systems because of this. It is useless and misleading. a gui is not just a graphical environment, it is a 'cue based system of interaction'. the updater is *actively* misleading users. it can easily be disabled in 'system tray settings' which i assume is a single flag in a config. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.… [View More]

4 3

[opensuse-factory] New Tumbleweed snapshot 20171112 released!
by Dominique Leuenberger 15 Nov '17

15 Nov '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a … [View More]specific problem. Packages changed: ModemManager aria2 (1.32.0 -> 1.33.0) caribou glib2-branding-openSUSE gobject-introspection hwdata (0.305 -> 0.306) hylafax+ kernel-source (4.13.11 -> 4.13.12) libostree (2017.10 -> 2017.12) libpwquality perl-DateTime-Locale (1.160000 -> 1.170000) perl-DateTime-TimeZone (2.14 -> 2.15) perl-Role-Tiny (2.000005 -> 2.000006) perl-Specio (0.40 -> 0.42) perl-Variable-Magic (0.61 -> 0.62) perl-YAML (1.23 -> 1.24) perl-libwww-perl (6.27 -> 6.29) python-Twisted (17.5.0 -> 17.9.0) python-attrs (17.2.0 -> 17.3.0) python-cffi (1.11.1 -> 1.11.2) python-cryptography (2.1.1 -> 2.1.3) python-idna (2.5 -> 2.6) python-libvirt-python (3.8.0 -> 3.9.0) vinagre xfce4-panel-plugin-genmon (4.0.0 -> 4.0.1) xfce4-panel-plugin-weather (0.8.9 -> 0.8.10) === Details === ==== ModemManager ==== Subpackages: ModemManager-bash-completion ModemManager-devel libmm-glib0 typelib-1_0-ModemManager-1_0 - Avoid using "systemctl enable" in spec file (bsc#1038402). ==== aria2 ==== Version update (1.32.0 -> 1.33.0) Subpackages: aria2-lang libaria2-0 - Update to version 1.33.0: * libaria2: Return last error code from DownloadHandle::getErrorCode * libuv: use pkg-config * Add --peer-agent option * Add --bt-load-saved-metadata option * Don't save control file if --auto-save-interval is 0. * Fix infinite loop bug when file is not found ==== caribou ==== Subpackages: caribou-common caribou-gtk-module-common caribou-gtk2-module caribou-gtk3-module caribou-lang libcaribou0 typelib-1_0-Caribou-1_0 - Switch build to python3. - Remove glib2_gsettings_schema macros calls in post/postun, not needed anymore with filetriggers. ==== glib2-branding-openSUSE ==== - Update SLE version to 15. - Remove post/postun scripts, no longer needed with file triggers. - Update favorites applications on SLE15, we switched to pidgin and gnome-photos. ==== gobject-introspection ==== Subpackages: girepository-1_0 libgirepository-1_0-1 - Switch to python3 - Cleanup with spec-cleaner - Run tests during build ==== hwdata ==== Version update (0.305 -> 0.306) - Update to version 0.306: * Updated pci, usb and vendor ids. ==== hylafax+ ==== Subpackages: hylafax+-client libfaxutil5_5_9 - bnc1052195 localized Email notification chops german Umlauts correction in bin/notify common_functions dictionary * notification.diff ==== kernel-source ==== Version update (4.13.11 -> 4.13.12) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - media: dib0700: fix invalid dvb_detach argument (CVE-2017-16646 bsc#1067105). - commit 9151c66 - Input: ims-psu - check if CDC union descriptor is sane (CVE-2017-16645 bsc#1067132). - commit 0cfe4b6 - net: usb: asix: fill null-ptr-deref in asix_suspend (CVE-2017-16647 bsc#1067102). - commit a088160 - Linux 4.13.12 (bnc#1012628). - irqchip/irq-mvebu-gicp: Add missing spin_lock init (bnc#1012628). - x86/mcelog: Get rid of RCU remnants (bnc#1012628). - perf/cgroup: Fix perf cgroup hierarchy support (bnc#1012628). - futex: Fix more put_pi_state() vs. exit_pi_state_list() races (bnc#1012628). - powerpc/kprobes: Dereference function pointers only if the address does not belong to kernel text (bnc#1012628). - x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo (bnc#1012628). - Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"" (bnc#1012628). - MIPS: SMP: Fix deadlock & online race (bnc#1012628). - MIPS: microMIPS: Fix incorrect mask in insn_table_MM (bnc#1012628). - MIPS: smp-cmp: Use right include for task_struct (bnc#1012628). - MIPS: bpf: Fix a typo in build_one_insn() (bnc#1012628). - Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols" (bnc#1012628). - drm/i915/edp: read edp display control registers unconditionally (bnc#1012628). - drm/i915: Do not rely on wm preservation for ILK watermarks (bnc#1012628). - mm, swap: fix race between swap count continuation operations (bnc#1012628). - fs/hugetlbfs/inode.c: fix hwpoison reserve accounting (bnc#1012628). - ocfs2: fstrim: Fix start offset of first cluster group during fstrim (bnc#1012628). - userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_size (bnc#1012628). - drm/amdgpu: allow harvesting check for Polaris VCE (bnc#1012628). - drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting (bnc#1012628). - ARM: 8715/1: add a private asm/unaligned.h (bnc#1012628). - ARM: dts: mvebu: pl310-cache disable double-linefill (bnc#1012628). - arm/arm64: kvm: Disable branch profiling in HYP code (bnc#1012628). - arm/arm64: KVM: set right LR register value for 32 bit guest when inject abort (bnc#1012628). - KVM: arm64: its: Fix missing dynamic allocation check in scan_its_table (bnc#1012628). - arm64: ensure __dump_instr() checks addr_limit (bnc#1012628). - virtio_blk: Fix an SG_IO regression (bnc#1012628). - ASoC: adau17x1: Workaround for noise bug in ADC (bnc#1012628). - KEYS: fix out-of-bounds read during ASN.1 parsing (bnc#1012628). - KEYS: trusted: fix writing past end of buffer in trusted_read() (bnc#1012628). - KEYS: return full count in keyring_read() if buffer is too small (bnc#1012628). - cifs: check MaxPathNameComponentLength != 0 before using it (bnc#1012628). - ALSA: seq: Fix nested rwsem annotation for lockdep splat (bnc#1012628). - ALSA: timer: Add missing mutex lock for compat ioctls (bnc#1012628). - commit 19cf938 - media: imon: Fix null-ptr-deref in imon_probe (CVE-2017-16537 bsc#1066573). - [media] cx231xx-cards: fix NULL-deref on missing association descriptor (CVE-2017-16536 bsc#1066606). - commit c9a1bf3 ==== libostree ==== Version update (2017.10 -> 2017.12) Subpackages: libostree-1-1 - Update to version 2017.12: + Quite a lot in this release. First, on the notable bugfix side, we fixed an issue where background threads could remain alive after an error was encountered during pulls. Particularly for projects like flatpak that do multiple pulls in process, this is an important fix. + Another important change related to pulls is that libostree now performs checksums when mirroring again. The intent here was to speed up mirroring, but it led to a confusing security story. Now it's easier to explain: for HTTP pulls we verify checksums (and this can be disabled), for local filesystem pulls we don't, (but it can be enabled). We've always verified checksums by default when pulling from an archive repository into a non-archive. + Anton Gerasimov contributed a change to the libcurl backend to support PKCS#11 URIs, useful for storing certificates in a hardware or software enclave. + The schema for the experimental OstreeRepoFinderMount API to find OSTree repos on removable media has changed incompatibly, so that the media doesn?t need to contain two similar lists of refs. It will now look in .ostree/repos.d, .ostree/repo, ostree/repo and var/lib/flatpak paths on removable media. + Similarly, the experimental ostree_repo_resolve_keyring_for_collection() API has changed to return an OstreeRemote containing the keyring, rather than just the keyring, making it more generally useful. + The bloom filter used when finding refs from remote peers has been fixed to work correctly on 32-bit architectures (such as ARM). This doesn?t change the bloom filter format, but will require bloom filters created on 32-bit architectures to be regenerated in order for advertisements from those machines to work. + Repositories which have a collection ID set will now put their repository metadata in an ostree-metadata ref when ostree summary --update is run, in addition to putting it in the summary file. This is part of a plan to securely allow unsigned summary files for peer-to-peer pulling of refs. This won?t happen for repositories which don?t have a collection ID set, or if --enable-experimental-api is not configured. + A new ostree create-usb command has been added (if configured with --enable-experimental-api) which can be used to put refs from repositories onto removable media in a format which can be detected by OstreeRepoFinderMount. For example, to allow easy sharing of flatpaks or OS updates between offline machines. + OstreeRepo has gained hash() and equal() methods, so it can now easily be used in a hash table based on its device number and inode, rather than using its path. + A minor bug was fixed in rofiles-fuse, which would cause files to be created with random mode bits if called for O_RDONLY. + For clients that use OstreeRepoDevInoCache, a bug was fixed which caused libostree to ignore callbacks that allow modifying file modes, ownership, and extended attributes. + libostree now supports --with-crypto=gnutls. Like the OpenSSL support, this is currently just checksums, but we are driving this towards making the GPG dependency optional and supporting other signature methods. + In previous releases, libostree learned how to make hardlinks for local pulls. But if we couldn't hardlink (e.g. the devices were separate), the local pull code went through a much slower generic path that included re-checksumming objects. Now there's a copy/reflink fast path that uses FICLONE/copy_file_range() directly if possible. This can be substantially faster. + ostree prune learned a new --only-branch option. This can be a lot more convenient for release engineering tasks. + As usual, more work was done to improve the testsuite. It should now be able to better detect tmpfs/overlayfs environments. The upstream CI now also runs tests in a non-overlayfs environment for better coverage. - Changes from version 2017.11: + This release has a few new features, some UX improvements for the command line, and a variety of bugfixes. + The project is now more canonically called "libostree", though "OSTree" and "ostree" are also fine. + The most important bugfix for anyone using rofiles-fuse (typically build systems, rpm-ostree also uses it) is: - rofiles-fuse: Fix lchown() and hardlink verification for symlinks. + On the features side, we've added a few new APIs to the libarchive importing and checkout path that will be used by rpm-ostree. This should be of interest to anyone using libostree for build systems or underlying a hybrid image/package system like rpm-ostree. + Also on the host system side, there is a new (canonical) place for build systems to put the kernel/initramfs: /usr/lib/modules/$kver. + Make all of the deployments show up in the uboot configuration, to help enable automatic fallback if a new OS fails to boot. + Lots of style cleanups, some "error prefixing" work to ensure we produce understandable errors in more situations, and one other notable cleanup: add a tmpfiles.d snippet to clean up /var/tmp/ostree-ovl.XXX. This should be nice for anyone who uses ostree admin unlock frequently. + Improve the management of configuration for remotes. + Lots of cleanup in the command line parsing and fixes for - -help, and also helped with the new --selinux-label option for ostree commit. + Fix the handling of GPG keys that have subkeys. + Fix the build system and tests. ==== libpwquality ==== Subpackages: libpwquality-lang libpwquality1 - Build python3 version of bindings as well ==== perl-DateTime-Locale ==== Version update (1.160000 -> 1.170000) - updated to 1.17 see /usr/share/doc/packages/perl-DateTime-Locale/Changes 1.17 2017-11-04 - Rebuilt all locale data with CLDR 32, released on 2017-11-01. ==== perl-DateTime-TimeZone ==== Version update (2.14 -> 2.15) - updated to 2.15 see /usr/share/doc/packages/perl-DateTime-TimeZone/Changes 2.15 2017-11-04 - Make the local zone lookup code handle the case where /usr/share/zoneinfo is a symlink, as it apparently is on recent versions of macOS (10.13). Fixed by Tom Wyant. GH #22 and #23. ==== perl-Role-Tiny ==== Version update (2.000005 -> 2.000006) - updated to 2.000006 see /usr/share/doc/packages/perl-Role-Tiny/Changes 2.000006 - 2017-11-08 - account for code references stored directly in stash (for perl 5.28) - work around hint leakage when loading modules in perl 5.8 and 5.10.1 ==== perl-Specio ==== Version update (0.40 -> 0.42) - updated to 0.42 see /usr/share/doc/packages/perl-Specio/Changes 0.42 2017-11-04 - The Perl library claimed it provided types named LaxVersionStr and StrictVersionStr but they were really named LaxVersion and StrictVersion. The names have now been fixed to match the documentation, so they are LaxVersionStr and StrictVersionStr. 0.41 2017-11-04 - Fixed checks for whether a class is loaded in light of upcoming optimization in Perl 5.28. Fixed by Sprout (GH #12). ==== perl-Variable-Magic ==== Version update (0.61 -> 0.62) - updated to 0.62 see /usr/share/doc/packages/perl-Variable-Magic/Changes 0.62 2017-11-04 16:35 UTC + Fix : [RT #123314] : Compatibility with CV-in-stash optimisation Thanks Father Chrysostomos for reporting and contributing a patch. ==== perl-YAML ==== Version update (1.23 -> 1.24) - updated to 1.24 see /usr/share/doc/packages/perl-YAML/Changes 1.24 Mon Oct 30 20:31:53 CET 2017 - Fix $LoadCode (PR#180, PR#181, PR#182 by @mohawk2++) ==== perl-libwww-perl ==== Version update (6.27 -> 6.29) - updated to 6.29 see /usr/share/doc/packages/perl-libwww-perl/Changes 6.29 2017-11-06 - Fix some version numbers 6.28 2017-11-06 - Remove last use of Geopt::Std (Sergey Remanov) (GH #267) - Include unmatched connect error in status string (Patrik Lundin) (GH #269) - Fix insecure open FILEHANDLE,EXPR (Takumi Akiyama) (GH #270) ==== python-Twisted ==== Version update (17.5.0 -> 17.9.0) - update to 17.9.0 For full list of changes please see: https://github.com/twisted/twisted/blob/twisted-17.9.0/NEWS.rst * mailman is only in python2 package ==== python-attrs ==== Version update (17.2.0 -> 17.3.0) - update to version 17.3.0: * Backward-incompatible Changes + Attributes are not defined on the class body anymore. This means that if you define a class "C" with an attribute "x", the class will *not* have an attribute "x" for introspection anymore. Instead of "C.x", use "attr.fields(C).x" or look at "C.__attrs_attrs__". The old behavior has been deprecated since version 16.1. (`#253 <https://github.com/python-attrs/attrs/issues/253>`_) * Changes + "super()" and "__class__" now work on Python 3 when "slots=True". (`#102 <https://github.com/python-attrs/attrs/issues/102>`_, `#226 <https://github.com/python-attrs/attrs/issues/226>`_, `#269 <https://github.com/python-attrs/attrs/issues/269>`_, `#270 <https://github.com/python-attrs/attrs/issues/270>`_, `#272 <https://github.com/python-attrs/attrs/issues/272>`_)- Added "type" argument to "attr.ib()" and corresponding "type" attribute to "attr.Attribute". This change paves the way for automatic type checking and serialization (though as of this release "attrs" does not make use of it). In Python 3.6 or higher, the value of "attr.Attribute.type" can alternately be set using variable type annotations (see `PEP 526 <https://www.python.org/dev/peps/pep-0526/>`_). (`#151 <https://github.com/python-attrs/attrs/issues/151>`_, `#214 <https://github.com/python-attrs/attrs/issues/214>`_, `#215 <https://github.com/python-attrs/attrs/issues/215>`_, `#239 <https://github.com/python-attrs/attrs/issues/239>`_) + The combination of "str=True" and "slots=True" now works on Python 2. (`#198 <https://github.com/python-attrs/attrs/issues/198>`_) + "attr.Factory" is hashable again. (`#204 <https://github.com/python-attrs/attrs/issues/204>`_) + Subclasses now can overwrite attribute definitions of their superclass. That means that you can -- for example -- change the default value for an attribute by redefining it. (`#221 <https://github.com/python-attrs/attrs/issues/221>`_, `#229 <https://github.com/python-attrs/attrs/issues/229>`_) + Added new option "auto_attribs" to "@attr.s" that allows to collect annotated fields without setting them to "attr.ib()". Setting a field to an "attr.ib()" is still possible to supply options like validators. Setting it to any other value is treated like it was passed as "attr.ib(default=value)" -- passing an instance of "attr.Factory" also works as expected. (`#262 <https://github.com/python-attrs/attrs/issues/262>`_, `#277 <https://github.com/python-attrs/attrs/issues/277>`_) + Instances of classes created using "attr.make_class()" can now be pickled. (`#282 <https://github.com/python-attrs/attrs/issues/282>`_) ==== python-cffi ==== Version update (1.11.1 -> 1.11.2) Subpackages: python2-cffi python3-cffi - update to version 1.11.2: * Fix Windows issue with managing the thread-state on CPython 3.0 to 3.5 ==== python-cryptography ==== Version update (2.1.1 -> 2.1.3) Subpackages: python2-cryptography python3-cryptography - update to version 2.1.3: * Updated Windows, macOS, and manylinux1 wheels to be compiled with OpenSSL 1.1.0g. - update to version 2.1.2: * Corrected a bug with the manylinux1 wheels where OpenSSL?s stack was marked executable. ==== python-idna ==== Version update (2.5 -> 2.6) Subpackages: python2-idna python3-idna - update to version 2.6: * Allows generation of IDNA and UTS 46 table data for different versions of Unicode, by deriving properties directly from Unicode data. * Ability to generate RFC 5892/IANA-style table data * Diagnostic output of IDNA-related Unicode properties and derived calculations for a given codepoint * Support for idna.__version__ to report version * Support for idna.idnadata.__version__ and idna.uts46data.__version__ to report Unicode version of underlying IDNA and UTS 46 data respectively. ==== python-libvirt-python ==== Version update (3.8.0 -> 3.9.0) - Update to 3.9.0 - Add all new APIs and constants in libvirt 3.9.0 ==== vinagre ==== Subpackages: vinagre-lang - Update vinagre-freerdp2.patch with patch from bgo#775616. Fix build with even later versions of freerdp. - Add -Wno-error=format-nonliteral to CFLAGS: fix build with gcc 7 (boo#1031342). - Add vinagre-cert-validation-api.patch: Fix certificate validation callback incompatibilities with freerdp 1.2 that causes rdp connections to abort (bgo#774473, boo#1002350). - Update to version 3.22.0: + No changes. - Update to version 3.21.92: + Improve FreeRDP authentication failure handling. + Correctly handle extended scancodes for RDP. + Updated translations. - Update to version 3.21.3: + Updated translations. - Enable rdp by default, since we now have the 2.0 branch in factory. Switch bcond_with rdp to bcond_without rdp. - Add vinagre-freerdp2.patch: make configure check for freerdp2, rather than just freerdp (bgo#765444). - Following the above patch: Replace pkgconfig(freerdp) for pkgconfig(freerdp2). Also add gnome-common BuildRequires and pass autreconf as the patch touches the buildsystem. Further add pkgconfig(appstream-glib) BuildRequires, new dependency after the port to freerdp2. - Update to GNOME 3.20.2 Fate#318572 - Update to version 3.20.2: + Updated translations. - Sync with Factory for new libvte support bsc#978804 - Drop vinagre-bnc874407-add-advanced-options.patch, rdp support is disabled. - Update to version 3.20.1: + Updated translations. - Update to version 3.20.0: + Don't capture key events of other tabs. + Give focus to new RDP tab. + Allow different logins to the same host. + Show correct tooltip for RDP tab. + Updated translations. - Disable RDP support (using bcond_with, so it can easily be toggled). If not building with rdp support, do not: - pass --enable-rdp to configure - BuildRequire pkgconfig(freerdp) - Drop vinagre-revert-freerdp-versionbump.patch and vinagre-revert-font-smoothing.patch: they are no longer sufficient. FreeRDP started 1.1 and 1.2 branches but refuses to create releases. GNOME makes use of features found in the 1.1 branch. - Update to version 3.19.2: + Store credentials for RDP (bgo#753355). + Handle domain when looking for credentials (bgo#753355). + Add minimize button to the fullscreen toolbar (bgo#753626). + Fix build against recent versions of FreeRDP. + Updated translations. - Rebase vinagre-revert-freerdp-versionbump.patch and vinagre-revert-font-smoothing.patch. - Update to version 3.18.2: + Revert "Accept IPv6 addresses". + Updated translations. - Update to version 3.18.1: + Enabled font smoothing by default in RDP plugin. + Accept IPv6 addresses. + Updated translations. - Add vinagre-revert-font-smoothing.patch: Revert the font smoothing as this relies on a new version of freerdp we do not yet have in openSUSE. - Update to version 3.18.0: + Allow scaling of RDP sessions. + Updated translations. - Update to version 3.17.91: + Use cached session size for RDP. + Fix selection rectangle when user leaves window. + Updated translations. - Update to version 3.17.2: + Trivial const-correctness fix. + Fix building against newer FreeRDP versions. + Updated translations. - Add vinagre-revert-freerdp-versionbump.patch: Revert upstreams adoptation to newer versions of freerdp (bgo#749124). - Update to version 3.16.1: + BSD: fix a couple of implicit declarations. + Change SPICE passwords limited to 60 characters. + Updated translations. - Update to version 3.16.0: + Updated translations. - Update to version 3.15.92: + Updated translations. - Update to version 3.15.91: + Update screenshot in help for 3.16. + Fix distcheck with Automake 1.15. + Bugs fixed: bgo#700353. + Updated translations. - Update to version 3.15.3: + Fix RDP initialization with recent FreeRDP. + Updated translations. - Update to version 3.15.2: + Remove bashism from configure.ac. + Add name and summary elements to AppData. + Detect RDP hosts via Avahi. + Updated translations. - Update to version 3.14.3: + Fix freeing of RDP events during dispose. + Updated translations. - Update to version 3.14.2: + Remove bashism from configure.ac. + Add name and summary elements to AppData. + Detect RDP hosts via Avahi. - Update to version 3.14.1: + Updated translations. - Update to version 3.14.0: + Updated translations. - Update to version 3.13.92: + Use APPSTREAM_XML instead of APPDATA_XML. + Updated translations. - Update to version 3.13.90: + Request RDP certificate verification if needed. + Avoid yes-no buttons in certificate dialogs. + Updated translations. - Update to version 3.13.4: + Enable RDP support during distcheck. + Fix some language in tooltip strings. + Use FreeRDP API in RDP plugin. + Updated translations. - Add pkgconfig(freerdp) and pkgconfig(x11) BuildRequires: new dependecies for RDP support. - Pass --enable-rdp to configure to ensure we build the support. - Drop freerdp Recommends: we now rely on the library/API. - Remove language handling for obsolete openSUSE versions. - Add adwaita-icon-theme BuildRequires: on an installed system, libgtk-3-0 requires it. On build though, it is exlucded to avoid a cycle. - Drop gnome-icon-theme Requires too, not needed nor wanted anymore. - Update vinagre-bnc874407-add-advanced-options.patch: When calling xfreerdp, add advanced options before the host/port (bnc#874407). - Update to version 3.13.2: + Port to vte-2.91 API. + Drop gnome-icon-theme dependency. + Updated translations. - Drop gnome-icon-theme BuildRequires: no longer required. - Replace pkgconfig(vte-2.90) BuildRequires with pkgconfig(vte-2.91), following upstreams port. - Add vinagre-bnc874407-add-advanced-options.patch: allow custom options to be passed to xfreerdp (bnc#874407). - Update to version 3.12.2: + Updated translations. - Update to version 3.12.1: + Updated translations. - Update to version 3.12.0: + Misc fixes. + Updated translations. - Update to version 3.11.92: + Add AppData (bgo#722893). + Add icon to help and add license. + Don't close connect dialog when showing help. + Updated translations. - Update to version 3.11.5: + Fix Spice plugin auto-clipboard property enum. + Updated translations. - Update to version 3.10.2 (bnc#849913): + Updated translations. - Update to version 3.10.1: + Updated translations. - Update to version 3.10.0: + Updated translations. - Update to version 3.9.90: + Implement get_dimensions() virtual function for VNC and RDP. + Updated translations. - Update to version 3.9.5: + Fix a logic bug in utils.show_many_errors(). + Add recognize_file() API to VinagreProtocol interface. + Fill the right ipv6 notation when using avahi dialog. + Make the BookmarksTree widget smaller. + Bugs fixed: bgo#704744, bgo#648008. + Updated translations. - Update to version 3.9.4: + VinagreTab: don't crash on screenshot. + Use xfreerdp for RDP support. + Show correct title in error dialog. + Updated translations. - Change rdesktop Recommends to freerdp, following upstreams choice to use xfreerdp for RDP support. - Update to version 3.9.2: + Allow to customize desktop size for RDP protocol. + Updated translations. - Update to version 3.8.2: + Fix help link in reverse connections (bgo#700014). + Updated translations. - Update to version 3.8.1: + Updated translations. - Update to version 3.8.0: + Updated translations. - Update to version 3.7.92: + Updated translations. - Update to version 3.7.91: + Updated translations. - Update to version 3.7.90: + Fix value of save_in_keyring output parameter. + Updated translations. - Update to version 3.7.4: + Use GPollableInputStream when checking SSH errors. + Updated translations. - Update to version 3.7.3: + Updated translations. - Update to version 3.6.2: + Do not use NULL attributes with libsecret (bgo#685041). + Fix missing prototypes warnings. - Update to version 3.6.1: + Updated translations. - Update to version 3.6.0: + Updated translations. - Update to version 3.5.92: + Updated translations. - Update to version 3.5.90: + Fix up handling of commandline options + Migrate from libgnome-keyring to libsecret + Updated translations. - Drop vinagre-cmdline-parsing.patch: fixed upstream - Replace pkgconfig(gnome-keyring-1) BuildRequires with pkgconfig(libsecret-1), following upstreams port to libsecret. - Drop xz BuildRequires as it now comes for free in the build system. - Update to version 3.5.2: + Depend on intltool 0.50 for GSettings translations + Updated translations. - Update to version 3.5.1: + Updated translations. - Add vinagre-cmdline-parsing.patch: Fix up handling of commandline options (bnc#722709, bgo#662586) - Update to version 3.4.2: + Updated translations. - Update to version 3.4.1: + Use example.com in address examples (bgo#672238) + Updated translations. - Update to version 3.4.0: + Fixed help/Makefile.am. + Updated translations. - Remove hack to find localized help: this has been fixed in find-lang.sh. - Update to version 3.3.92: + Minor bugfixes. + Updated translations. - Enable spice support: - add pkgconfig(spice-client-gtk-3.0) BuildRequires - pass --enable-spice to configure instead of --disable-spice - Update to version 3.3.4: + Make host text entry editable in connect dialog + Improved documentation. + Updated translations. - Update to version 3.3.3: + Set the window on the reverse VNC listener + Remove spurious n-rows and n-columns properties + Fix some pointer type mismatch warnings + Link plugins into the vinagre binary (bgo#653558) + Switch help to build with yelp-tools (bgo#657669) + Build fixes (including bgo#660531, bgo#665368) + Updated translations. - Add xz BuildRequires because we can't build a package for a xz-compressed tarball without explicitly specifying that... See bnc#697467 for more details. - Change gnome-doc-utils-devel BuildRequires to yelp-tools, following upstream change. - Drop vinagre-fix-missing-header.patch: fixed upstream. - Remove the custom CFLAGS we had in %build as bgo#653558 was fixed. - Update to version 3.3.2: + Change the group names from lowercase to CamelCase + Use a button-sized image on "Authentication" button + Use GtkGrid rather than deprecated GtkTable + Updated translations. - Update to version 3.3.1: + Integrate fixes from 3.2.1. + Hold the slave PTY open so that SSH does not fail + Fix a truncated string marked for translation + Updated translations. - Update to version 3.2.1: + Fix implicit declaration in vinagre-tube-handler.c + Do not use deprecated gtk_widget_modify_bg() + Add range to history-size GSettings key + Display correct application icon in about dialog + Add missing includes to fix build on OpenBSD + Updated translations. - Add -wl,--no-as-needed to CFLAGS during the build in order to work arund bgo#653558: the plugins are not correctly dynamically loaded but are linked into the main binary. - Add explicit shared-mime-info BuildRequires since we use the %mime_database_* macros. - Update to version 3.2.0: + Remove tab close button minimum size hacks + Remove deprecated GTK+ API usage + Updated translations. - Stop passing --disable-maintainer-mode to configure: this is not needed anymore since usage of deprecated API got removed. - Update to version 3.1.92: + Fix a few trivial compiler warnings + Updated translations. - Pass --disable-maintainer-mode to configure as a workaround: this lets use deprecated GTK+ API for now. We should not keep this flag in the long term, though. - Update to version 3.1.91: + Use correct compiler warning flags variable + Fixed bad wording in connect help + Updated translations. - Update to version 3.1.90: + Do not set empty text on the credential entry + Use a string constant for the help module name + Add help button to connect dialog + Updated translations. - Update to version 3.1.5: + Connect the bookmark menu item "activate" signal + Disable Ctrl-Alt-Del action in view-only mode + Port from Gtk[H|V]Box to GtkBox + Rework the first-run keyboard shortcut message + Update first-run help button target + Default to 8 bit color depth for Telepathy tubes + Improve the help + Bugs fixed: bgo#614774 + Updated translations. - Rebase vinagre-fix-missing-header.patch. - Update to version 3.1.4: + Add GConf to GSettings convert file + Remove the unused dummy plugin source files + Move about dialog text to GtkBuilder XML + Updated translations. - Rebuild the vala sources before building the code: vinagre-fix-missing-header.patch introduces a new file that needs to be generated. When the proper fix will be upstream, the file will be in the tarball and we won't need this step anymore. - Update to version 3.1.3: + Allow the main notebook to expand. + Convert some code to Vala. + Avoid NULL dereference if a URI has no hostname. + Distribute the config VAPI file. + Code improvements and cleanups. + Build fixes. + Updated documentation. + Updated translations. - Update vinagre-fix-missing-header.patch with patch suggested by upstream. - Add vala BuildRequires, needed for the patch. - Update to version 3.1.2: + Add static extension support, and convert plugins to this. + Integrate reverse-vnc plugin directly. + Remove the bookmarks side panel. + Remove the im-status plugin. + Remove libpeas and gobject-introspection support. + Documentation improvements. + Code cleanups. + Build fixes. + Updated translations. - Remove now unneeded pkgconfig(libpeas-gtk-1.0) BuildRequires. - Remove unneeded pkgconfig(libpanelapplet-4.0) BuildRequires: the applet was removed in 3.1.1. - Remove devel subpackage, as there is no support for external plugins anymore, and add Obsoletes for vinagre-devel to main package for smooth upgrades. - Add vinagre-fix-missing-header.patch: fix the build by adding the missing header not generated by vala. - Update to version 3.1.1: + Remove panel applet + Use ?remote desktop? rather than ?machine? + Mark only the connect action as being important + Make it possible to focus the hostname GtkEntry + Correct some UI strings and stock icon usage + Capitalise Vinagre in command-line option help + Fix help button in reverse connection dialog + Replace old DocBook help with Mallard help + Code improvements. + bgo#597110: Add help page for reverse connections + bgo#599690: Many UI and string changes + bgo#640082: Add X geometry command-line option - Move *.gir file to devel subpackage. - Remove explicit Requires for gtk2-devel and libxml2-devel in devel subpackage: they will automatically be added the pkgconfig() way. - Update to version 3.0.1: + Leave initial focus set to the primary toolbar + Check for gnome-icon-theme during configure + Fix reverse-vnc GtkBuilder file search path + Minor updates to the man page + bgo#647497: fix the SSH plugin build. - Drop vinagre-ssh.patch: fixed upstream. - Remove gnome-common from BuildRequires and call to gnome-autogen.sh: not needed anymore now that patch is gone. - Change Group of devel subpackage to Development/Libraries/GNOME (from Productivity/Networking/Remote Desktop) to fix a rpmlint warning. - Add vinagre-ssh.patch: Fix building of ssh plugin, bgo#647497. - Add gnome-common BuildRequires and call gnome-autogen.sh in setup, and re-enable ssh plugin. - Update to version 3.0.0: + Bump VINAGRE_ABI_VERSION to 3.0 + Updated translations - Update to version 2.91.93: + Add some style classes and junctions to make vinagre look better. + Updated translations - Changes from version 2.91.92: + Remove broken gtk-vnc log handler, bgo#632711 + Port applet to new libpanel-applet API. + Build fixes. + Updated translations. - Changes from version 2.91.91: + Features - Make GSettings schema translatable + Fixes - Overhaul configure script - Make the build partially non-recursive - Fix the build with introspection enabled - Adapt to GtkObject removal in GTK+ 3 - Replace gdk_draw_* with cairo* in panel applet - Avoid NULL pointer dereference in plugins if introspection is disabled - Partially fix introspection build + Updated translations. - Changes from version 2.91.8: + Add a Spice plugin. + Fix reverse VNC plugin + Complete the GSettings migration + Various build fixes - Changes from version 2.91.7: + Build with GTK+ 3 + Use GtkApplication + Use libpeas for plugins - Changes from version 2.31.5: + Build with GTK+ 3 + Updated translations. - Changes from version 2.31.4: + Added basic RDP support + Allows using of an alternative ssh port when doing tunnel + Build with GSEAL + Removed password length limit for SSH connections + Minor fixes + Updated translations. - Disable ssh support until it is fixed upstream. - Move to pkgconfig()-style BuildRequires and GNOME 3: + Old ones: gnome-panel-devel, gtk-vnc-devel, gtk2-devel,, libavahi-gobject-devel, libgnome-keyring-devel, telepathy-glib-devel, vte-devel. + New ones: avahi-gobject, avahi-ui-gtk3, gnome-keyring-1, gtk+-3.0, gtk-vnc-2.0, libpanelapplet-4.0, libxml-2.0, telepathy-glib, vte-2.90. - Add pkgconfig(libpeas-gtk-1.0) BuildRequires. - Add gnome-icon-theme Requires as we need icons from there at runtime. - Disable spice support with --disable-spice configure flag, until we have spice packages in Factory. - Remove --enable-avahi configure flag, as autodetection is used in configure. - Replace GConf2 schemas handling with GSettings schemas handling, with %glib2_gsettings_schema_* macros. - Add "Remote Desktop Viewer" generic name to vinagre.desktop. - Add symlink for preferences-desktop-remote-desktop from gnome-icon-theme to allow package check to pass. - Added support for translation-update-upstream. - Call relevant macros in %post/%postun: + %desktop_database_post/postun because the package ships at least one desktop file. + %icon_theme_cache_post/postun because the package ships themed icons. + %mime_database_post/postun because the package ships a mime type definition. - Pass %{?no_lang_C} to %find_lang so that english documentation can be packaged with the program, and not in the lang subpackage. - Change Requires of lang subpackage to Recommends, since the english documentation is not there anymore. - Go back to 2.30.3, since the 2.31 release cycle is used with 3.0 as target in April, for vinagre, and we want something that is stable. - Changes between 2.30.2 and 2.30.3: + Updated translations. - Add rdesktop Recommends for the RDP support. - Change group to Productivity/Networking/Other since Productivity/Networking/Remote Desktop doesn't exist. - Update to version 2.31.4: + Added basic RDP support + Allows using of an alternative ssh port when doing tunnel + Build with GSEAL + Removed password length limit for SSH connections + Minor fixes + Updated translations. - Update to version 2.30.2: + Removed password length limit for SSH connections + Allows using of an alternative ssh port when doing tunnel + Updated translations. - Update to version 2.30.1: + Fix a crash when using SSH tunneling due to a not exported symbol + Added various comments for translators + Bump telepathy minimum version to 0.9.0 + Fix SSH username saving in bookmarks + Make sure we use system ifaddrs.h thus showing the correct IP address in the Reverse Connections dialog + Updated translations. - Update to version 2.30.0: + Updated translations. - Update to version 2.29.92: + Updated translations. - Update to version 2.29.91: + Updated translations. - Update to version 2.29.90: + Features - Improved SSH tunneling. - Show a message in the first run explaining menu accelerators and keyboard shortcuts behavior in Vinagre - Store window size, position, panel state, etc in the XDG_CACHE_DIR instead of GConf - Enable the username field for SSH connections - Option to keep the aspect ratio when using scaling - Modernize autotools - SSH plugin uses the username provided from mdns (Avahi) + Fixes - Fix build on Solaris - Drop 1px line at toolbar in fullscreen mode - Minor fixes + Translation updates - Add gcc-c++ to BuildRequires: configure script now requires it. - Remove en@shaw translation on openSUSE 11.2 and earlier. - Update to version 2.29.6: + Added basic support to SSH tunneling, to be polished in next release + Updated Telepathy support to the new API + Translation updates - Change gnome-keyring-devel BuildRequires to libgnome-keyring-devel, following the module split upstream. - Update to version 2.29.1: + Added a listener mode (similar to vncviewer -listen) + Added ability to request an screen update + Added ability to change depth color + Added ability to use JPEG compression (lossy encoding) + Added an toolbar in bookmarks panel + Use AM_SILENT_RULES if available + Requires gtk-vnc 0.3.10 + Fix warnings and crashes activating bookmarks + Keep the aspect ratio when using scaling mode + Updated translations. - Update to version 2.28.0.1: + Fix build + Fix warnings activating mDNS bookmarks + Updated translations. - Add gtk2- and libxml2-devel to -devel Requires. - Update to version 2.27.92: + Removed duplicated names in the UI file, avoiding crashes + Show IP addresses of avahi-discovered machines instead of names + Handle GConf errors in preferences + Updated translations. - Update to version 2.27.91: + Updated Unix man page. + Improvements in Telepathy tubes. + Toolbar in full screen mode is now centralized. + Updated documentation (help). + Updated translations. - Update to version 2.27.90: + Features and Fixes - Use GtkBuilder instead of Glade. - Added a *very basic* SSH plugin. Enable it with --enable-ssh in configure. - Panel applet is now optional. Disable it with - -disable-applet. - Toolbar in fullscreen mode is now centralized. - Screenshot can be saved in various formats. - New fullscreen command-line option. - New scaled command-line option. - If the server is omitted in the command line, 'localhost' is assumed. - Clipboard operations work even with special chars. + Updated translations. - Drop vinagre-linking-order.patch: fixed upstream. - Drop vinagre-build-fix.patch: fixed upstream. - Remove call to gnome-autogen.sh, and gnome-common BuildRequires. - Remove libglade2-devel BuildRequires. - Pass --enable-ssh to configure, and add vte-devel to BuildRequires. - Remove workaround to move a file that was not in the right directory (vinagre-plugin.png). - Update to version 2.27.5: + New plugin system. All protocols should be implemented as a plugin. Initially we have only VNC plugin. + Telepathy tubes support. This allows you to access a screen of an IM contact. + Lots of minor fixes. + Updated translations. - Add gnome-keyring-devel, telepathy-glib-devel BuildRequires. - Add vinagre-linking-order.patch and vinagre-build-fix.patch to fix build. - Add devel package, for development files needed to create plugins. - Use libexecdir instead of libdir in the file list to fix build. - Do not package omf files twice. - Update to version 2.26.2: + Updated translations. - Update to version 2.26.1: + bgo#574134 ? Don't allow items name duplicated on bookmarks. + Updated translations. - Update to version 2.26.0: + Updated translations. - Remove AutoReqProv: it's default now. - Update to version 2.25.92: + Improved the authentication dialog + Allow IPv6 address in command line as well in the connection dialog. The address must be enclosed by square braces, for instance: [::a:b:c:d]. This is the same syntax used by RealVNC + Translation updates ==== xfce4-panel-plugin-genmon ==== Version update (4.0.0 -> 4.0.1) Subpackages: xfce4-panel-plugin-genmon-lang - update to version 4.0.1 - Allow pango markup in tooltip as well - Fix progressbar wrong direction ==== xfce4-panel-plugin-weather ==== Version update (0.8.9 -> 0.8.10) Subpackages: xfce4-panel-plugin-weather-lang - update to version 0.8.10 - Set USER_AGENT for nominatim search (bxo#13877) - Fix showing times in UTC instead of local time on FreeBSD (bxo#13358) - Translation updates -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org [View Less]

7 13

[opensuse-factory] New Tumbleweed snapshot 20171113 released!
by Dominique Leuenberger 14 Nov '17

14 Nov '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a … [View More]

1 0

[opensuse-factory] VLC
by James Bunnell 14 Nov '17

14 Nov '17

Lately when I do zypper dup it has been alerting me to the VLC repo: Retrieving repository 'VLC' metadata ----------------------------------------[\] The gpg key signing file 'repomd.xml' will expire in 9 days. Repository: VLC Key Name: Dominique Leuenberger (VLC openSUSE Repository) <dominique-vlc.suse(a)leuenberger.net> Key Fingerprint: BC8D780D E3308581 B2E07085 33DE8FB7 C8DA93D2 Key Created: Tue 24 Nov 2015 11:27:08 AM EST Key Expires: Thu 23 Nov … [View More]

2 1

[opensuse-factory] devel:tools publishing disabled?
by Martin Herkt 14 Nov '17

14 Nov '17

I’m just wondering why publishing has been disabled for the devel:tools project. Maybe this could be explained in a comment on the project page?

2 1

[opensuse-factory] Nvidia driver has been fixed
by Roman Bysh 14 Nov '17

14 Nov '17

Hi all, I was just informed by Jiri that it has been fixed by cad1ef90ba8c995bf863e0bfc0bacff55f904410 already. -- Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] TW 20171109 iftop broken again
by Bruno Friedmann 13 Nov '17

13 Nov '17

Since at least 20171109 or previous one (didn't use iftop during 7 last days) it appear to be broken again Same symptom when last ncurse update occurs few month ago. Is it just a question of time, or it need a rebuild nor triggered automagically ? btw, mc, htop seem to be all ok... -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch Bareos Partner, openSUSE Member, fsfe fellowship GPG KEY : D5C9B751C4653227 irc: tigerfoot -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)… [View More]

2 2

[opensuse-factory] Leap 15 status update 20171110
by Ludwig Nussel 13 Nov '17

13 Nov '17

Hi, Two months after my last status update¹ Leap 15 is almost rolling. Following SLE 15 I'd like to aim for a release in April. Current status - The project builds with only a few unresolvable/failed². Right now Leap 15 is more or less only the base system from SLE with GNOME plus KDE though. - Staging projects are up and working³ - openQA tests the builds⁴. Builds would even be released automatically if they were more green. - The leaper bot and update crawler keep Leap 15 in sync … [View More]with SLE and Factory - online repos are available on download.opensuse.org and there are even installable ISOs (manually released bypassing openQA). If you followed the links you see lots of red, main reasons are - yast switched to a new partitioning backing ("storage-ng") which is not complete yet and some openQA tests are not yet adopted either. That's why the RAID test fails in staging. - Pattern or package dependency changes pull in X in a server install and the minimalX install installs GNOME (boo#1067477). - The way kiwi files for DVD builds are generated has changed. Rather than a mechanism built into OBS it's now an external service (obs-service-product_converter). The scripts around that are not finished yet⁵, so the DVD lacks packages, supplements are not handled yet and neither are localization packages. Also, dropped packages are not yet listed as obsolete in the metadata so upgrades don't work properly. Overall Leap 15 doesn't look broken though. Since I know of at least one person who installed 15 already on his Laptop, I'd call this Alpha state :-) Next steps - Fix the openQA test failures. Means adjust test case and submit missing packages. Help appreciated with that. - Submit all packages that were in 42, are still in Factory and build for 15 from Factory to 15 (up to ~7500 packages). A script will do that when we're green enough. In order to avoid spamming too much there will be no explicit maintainer ACK. It will still be possible to file delete requests afterwards. - Submit all remaining packages that build for 15 from Factory (up to ~1700 packages). Same mechanism as with 42. Package resp devel project maintainers will need to give their ok via reviews in the submit requests. - Integrate a new Leap 15 branding. Right now we still have the Tumbleweed one. - Maintainers of ports to architectures other than x86_64 may want to start looking into Leap 15. cu Ludwig [1] https://lists.opensuse.org/opensuse-factory/2017-09/msg00140.html [2] https://build.opensuse.org/project/status/openSUSE:Leap:15.0 https://build.opensuse.org/project/monitor/openSUSE:Leap:15.0 [3] https://build.opensuse.org/project/dashboard/openSUSE:Leap:15.0 [4] https://openqa.opensuse.org/group_overview/50 [5] https://github.com/openSUSE/osc-plugin-factory/blob/master/pkglistgen.py -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.com/ SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org [View Less]

10 14

Re: [opensuse-factory] FF56 Flash Player - Working on Windows 10 not working on Tumbleweed
by Stefan Knorr 13 Nov '17

13 Nov '17

Hi On Tue, Oct 31, 2017 at 2:16 PM, Marco Calistri <mcalistri(a)hotmail.com> wrote: >> If that doesn't help, you could also try with freshplayerplugin and >> flash- player-ppapi installed and flash-player removed. > Already attempted without success! It can't work on Firefox 56* -- NPAPI now only works for the original NPAPI Flash. All other NPAPI plugins, like Java, Silverlight, are blocked. Freshplayer is some sort of PPAPI-NPAPI translation layer. Hence, Firefox now … [View More]

3 5