May 2015 - openSUSE Factory - openSUSE Mailing Lists

Re: [opensuse-factory] gcc 5.0 and offload
by Richard Biener 29 May '15

29 May '15

On Wed, 20 May 2015, Alin Marin Elena wrote: > Hi Richard, > > Any progress or any need of help on this? There is still no hardware available where I could test anything so I'm currently not wasting time to figure out how to just get something compiled. If you'd like to help with this that would be great. I'd add offloading sub-packages to the gcc package (on selected host architectures only) and basically compile & install gcc multiple times. It's going to be interesting (eventually) to not mess up the already complicated spec file too much... Another approach would be to compile the offload compilers separately via the existing cross-spec.in machinery, adding another "variant". That would be more friendly to factory bootstrap times. We can add --enable-offload-targets=x86_64-intelmicemul-linux-gnu=$install_dir/usr to the main compiler (on some host architectures), but I'd prefer to install the offload compiler beyond %{libsubdir}. Richard. > regards, > Alin > > Without Questions there are no Answers! > ______________________________________________________________________ > Dr. Alin Marin ELENA > http://alin.elena.space/ <http://alin.elenaworld.net/> > ______________________________________________________________________ > > On 25 February 2015 at 09:28, Alin Marin Elena <alinm.elena(a)gmail.com> > wrote: > > > By the this is the way I built it. > > > > install_dir=/ichec/packages/gcc/5.0.0-s20150222 > > > > mkdir -p build-fionn-phi > > pushd build-fionn-phi > > rm -rf * > > ../configure --build=x86_64-intelmicemul-linux-gnu > > --host=x86_64-intelmicemul-linux-gnu \ > > --target=x86_64-intelmicemul-linux-gnu > > --enable-as-accelerator-for=x86_64-suse-linux \ > > --with-pkgversion=ichec --enable-languages=c,c++,fortran --disable-libgcj \ > > --enable-__cxa_atexit --enable-libstdcxx-allocator=new --prefix=/usr > > > > make -j40 > > make install DESTDIR=$install_dir > > popd > > > > mkdir -p build-fionn-host > > pushd build-fionn-host > > rm -rf * > > > > ../configure --enable-languages=c,c++,fortran \ > > --enable-__cxa_atexit --enable-libstdcxx-allocator=new > > --with-pkgversion=ichec \ > > --disable-libgcj --build=x86_64-suse-linux --host=x86_64-suse-linux \ > > --enable-offload-targets=x86_64-intelmicemul-linux-gnu=$install_dir/usr > > --prefix=/usr > > > > make -j 40 > > make install DESTDIR=$install_dir > > popd > > > > Without Questions there are no Answers! > > ______________________________________________________________________ > > Dr. Alin Marin ELENA > > http://alin.elenaworld.net/ > > ______________________________________________________________________ > > > > > > On 25 February 2015 at 09:24, Alin Marin Elena <alinm.elena(a)gmail.com> > > wrote: > > > Hi Richard, > > > > > > you are right, got a little bit fouled by the documentation. I have > > > built it on a machine with hardware but somehow I failed., to build > > > code... I may have messed up the paths. > > > > > > > > > [alin@fionn2:~]: gcc -o hello_v2.X > > > acratus/courses/xeonphi/hands/code/01-hello/c/hello_v2.c -fopenmp > > > mkoffload-intelmic: fatal error: offload compiler > > > x86_64-suse-linux-accel-x86_64-intelmicemul-linux-gnu-gcc not found > > > compilation terminated. > > > lto-wrapper: fatal error: > > > > > /ichec/home/packages/gcc/5.0.0-s20150222/usr/bin/../libexec/gcc/x86_64-suse-linux/5.0.0//accel/x86_64-intelmicemul-linux-gnu/mkofflo > > > ad returned 1 exit status > > > compilation terminated. > > > /usr/bin/ld: lto-wrapper failed > > > collect2: error: ld returned 1 exit status > > > > > > > > > My understanding is that at least the emulated bit shall work, xeon > > > phi, no idea about nvidia. > > > > > > regards, > > > Alin > > > Without Questions there are no Answers! > > > ______________________________________________________________________ > > > Dr. Alin Marin ELENA > > > http://alin.elenaworld.net/ > > > ______________________________________________________________________ > > > > > > > > > On 25 February 2015 at 09:13, Richard Biener <rguenther(a)suse.de> wrote: > > >> On Tue, 24 Feb 2015, Alin Marin Elena wrote: > > >> > > >>> Hi All, > > >>> > > >>> > > >>> gcc 5.0 supports offload nowadays... for xeon phi. > > >>> > > >>> https://gcc.gnu.org/wiki/Offloading > > >>> > > >>> is there any chance to get it into our gcc 5.0 package, the procedure > > >>> seems pretty straightforward? > > >> > > >> The procedure is exactly not pretty straightforward. I'm currently > > >> waiting for hardware to be able to test it and then, if time permits, > > >> try to package the offloading stuff (similar for NVPTX offloading). > > >> > > >> Richard. > > >> > > >> -- > > >> Richard Biener <rguenther(a)suse.de> > > >> SUSE LINUX GmbH, GF: Felix Imendoerffer, Jane Smithard, Jennifer Guild, > > >> Dilip Upmanyu, Graham Norton HRB 21284 (AG Nuernberg) > > > -- Richard Biener <rguenther(a)suse.de> SUSE LINUX GmbH, GF: Felix Imendoerffer, Jane Smithard, Dilip Upmanyu, Graham Norton, HRB 21284 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] your patches for bcache gc
by Oliver Neukum 28 May '15

28 May '15

Hi, I am sorry to touch this topic again, but I think something needs to be done. Your patches for bcache have been included in the OS kernel for months yet they don't go upstream. Would it be possible to bypass the maintainer? It seems to me we want at least the basic fixes in upstream and stable. Regards Oliver -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] New Tumbleweed snapshot 20150527 released!
by Ludwig Nussel 28 May '15

28 May '15

Changed packages: ==== e2fsprogs ==== Version update (1.42.12 -> 1.42.13) Subpackages: e2fsprogs-devel libcom_err-devel libcom_err2 libcom_err2-32bit libext2fs-devel libext2fs2 - Update to 1.42.13 * fix potential buffer overflow while closing a filesystem * fix deadlock which occurs when using systemd and e2fsck.conf's logging feature * make tune2fs clear journal superblock backup when removing journal * fix use after free bugs in resize2fs and e2fsck * fix endianity bugs in libext2fs ... - Remove e2fsck-fix-free-pointer-dereferences.patch: Merged upstream ==== kio_iso ==== Subpackages: krusader - Only suggest documentation, do not recommend it. ==== libmpd1 ==== Version update (0.20.0 -> 11.8.17) - Update to version 11.8.17 * ChangeLog has not been updated - Update home page Url - Use download Url as source - Update and unversion libmpd-0.20.0_glibc-2.20.patch > libmpd-glibc-2.20.patch - Removed libmpd-overflow.patch ==== perl-Config-General ==== Version update (2.56 -> 2.57) - updated to 2.57 see /usr/share/doc/packages/perl-Config-General/Changelog 2.57 - fix rt.cpan.org#104548, dont allow special chars like newline or < in keys, which leads to faile when saving. 2.56 - fix rt.cpan.org#95325 2.55 - fix rt.cpan.org#95314 ==== python3-smbc ==== Version update (1.0.15.3 -> 1.0.15.4) - update to version 1.0.15.4: * added some constants ==== libqpdf13 ==== Version update (5.1.2 -> 5.1.3) - Update to version 5.1.3 * Handle object streams with more than 255 objects * Security fixes courtesy of Google Security Team * Properly handle pages that have no content * Robustness fixes for invalid PDF files ==== yast2-ruby-bindings ==== Version update (3.1.32 -> 3.1.33) - add ability to test if scr is local (FATE#317900) - 3.1.33 Removed packages: kde4-l10n-ru-doc krusader-doc Added packages: -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Cannot connect to wifi (WPA enterprise, TTLS, PAP)
by Carlos Bessa 28 May '15

28 May '15

Hi all! ever since the Tumbleweed 20150503 update that I'm unable to connect to my University wireless network. It keeps prompting me for the password. Different combinations: TTLS/PAP, TTLS/MSCHAP, PEAP/MSCHAP also do not work (worked before). The 20150503 announcement mentions the following: ==== wpa_supplicant ==== Subpackages: wpa_supplicant-gui - 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch Fix CVE-2015-1863, memcpy overflow. - wpa_supplicant-alloc_size.patch: annotate two wrappers with attribute alloc_size, which may help warning us of bugs such as the above. I have update also to the 20150505 release but the problem remains. The announcement does not mention anything related to wpa. At the same time the IT department did replace some network equipment but my android phone, Windows install and Fedora livecd that I had laying around still connect to the network as usual. Tried connecting through wicked, configured through yast, but it does not connect as well. dmesg output shows: [ 1283.284035] cfg80211: Calling CRDA to update world regulatory domain [ 1289.261529] wlp3s0: authenticate with 00:1d:45:d3:1a:70 [ 1289.263255] wlp3s0: send auth to 00:1d:45:d3:1a:70 (try 1/3) [ 1289.265465] wlp3s0: authenticated [ 1289.267450] wlp3s0: associate with 00:1d:45:d3:1a:70 (try 1/3) [ 1289.271183] wlp3s0: RX AssocResp from 00:1d:45:d3:1a:70 (capab=0x431 status=0 aid=58) [ 1289.273398] wlp3s0: associated [ 1289.273540] cfg80211: Calling CRDA to update world regulatory domain [ 1289.306986] wlp3s0: Limiting TX power to 17 dBm as advertised by 00:1d:45:d3:1a:70 [ 1314.274841] wlp3s0: deauthenticating from 00:1d:45:d3:1a:70 by local choice (Reason: 3=DEAUTH_LEAVING) spa_supplicant.log shows: wlp3s0: SME: Trying to authenticate with 00:1d:45:d3:1a:70 (SSID='eduroam' freq=2462 MHz) wlp3s0: Trying to associate with 00:1d:45:d3:1a:70 (SSID='eduroam' freq=2462 MHz) wlp3s0: Associated with 00:1d:45:d3:1a:70 wlp3s0: CTRL-EVENT-EAP-STARTED EAP authentication started wlp3s0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 wlp3s0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected wlp3s0: CTRL-EVENT-EAP-PEER-CERT depth=3 subject='/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root' hash=687fa451382278fff0c8b11f8d43d576671c6eb2bceab413fb83d965d06d2ff2 wlp3s0: CTRL-EVENT-EAP-PEER-CERT depth=3 subject='/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root' hash=687fa451382278fff0c8b11f8d43d576671c6eb2bceab413fb83d965d06d2ff2 wlp3s0: CTRL-EVENT-EAP-PEER-CERT depth=2 subject='/C=US/ST=UT/L=Salt Lake City/O=The USERTRUST Network/OU=http://www.usertrust.com/CN=UTN-USERFirst-Hardware' hash=cd1ee37f0f4ac1aa3f6759f3cad998d1c581f7c1e039ba891c8244ef9e3ad9ce wlp3s0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=NL/O=TERENA/CN=TERENA SSL CA' hash=5c428b013b2e3f0d30abb5bebd92d066dc06dc223329eb0fc735609946cf8e1c wlp3s0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=PT/postalCode=4704-553 Braga/ST=Braga/L=Braga/street=Largo do Pa\xC3\xA7o/O=Universidade do Minho/OU=SCOM/CN=eduroam.uminho.pt' hash=f5284cf9b66a2fd98ece64d06a394e433d978a53be7b51fc4f7e469a331bc055 wlp3s0: CTRL-EVENT-EAP-PEER-ALT depth=0 DNS:eduroam.uminho.pt wlp3s0: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully nl80211: Unexpected encryption algorithm 5 wlp3s0: CTRL-EVENT-DISCONNECTED bssid=00:1d:45:d3:1a:70 reason=3 locally_generated=1 This discussion seems to be about the same problem: http://lists.shmoo.com/pipermail/hostap/2015-April/032685.html And this probably as well: https://bugs.gentoo.org/show_bug.cgi?id=548064 Going back to openSUSE 13.2 wpa_supplicant 2.2 package makes it work again. So, what to do now? thanks, Carlos Bessa -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 6

[opensuse-factory] Question on openQA and TW
by skylar McKindley 28 May '15

28 May '15

As I understand the testing process is in stages or rings(?) a stage for package submitting, a testing and one for openQA testing. I may have that wrong, but I'm not sure. Is there any way to set that first stage as a repo on a TW machine that has no other use to me? I understand that breakage is all too likely, but this machine had a SLE 12 install until I added the TW repos and converted it to TW, that alone was painful -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20150503 released!
by Ludwig Nussel 28 May '15

28 May '15

Changed packages: ==== libdirectfb-1_7-7 ==== - CVE-2014-2977, CVE-2014-2978: added reference to patches proposal on upstream list ==== Mesa ==== Version update (10.5.3 -> 10.5.4) Subpackages: Mesa-32bit Mesa-devel Mesa-dri-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv1_CM-devel Mesa-libGLESv1_CM1 Mesa-libGLESv2-2 Mesa-libGLESv2-devel Mesa-libglapi-devel Mesa-libglapi0 Mesa-libglapi0-32bit libOSMesa-devel libOSMesa9 libOSMesa9-32bit libgbm-devel libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libwayland-egl-devel libwayland-egl1 libxatracker2 - Update to 10.5.4 * This release includes fixes for the mesa state-tracker used by all the gallium drivers, a drirc workaround for Second Life, plus i965 fixes. For the Android users out there, this release includes many compilation fixes with more to come shortly. ==== ModemManager ==== Version update (1.4.2 -> 1.4.8) Subpackages: libmm-glib0 - Update to version 1.4.8: + Build: avoid building DBus tests with GLib 2.32. + ZTE: support MF700. + Huawei: extend ^NDISSTATQRY parser with new response formats. + Blacklist: ignore devices from Access Interface Solutions. + Core: added ModemManager --version action. + Some other minor fixes. - Changes from version 1.4.6: + MBIM: by default use the new mbim-proxy setup. + Telit: new support for HE910, UE910 and UL865. + Location: avoid printing location info in syslog with info level. + Greylist: add Cypress USB<->RS232 adapters + QMI: avoid unref-ing arrays owned by the output bundles. + Some other minor fixes. - Changes from version 1.4.4: + Use 'DMS Set FCC Authentication' if online mode fails in QMI modems. This change requires bumping the libqmi version to 1.12.4, which is the stable release including the change. + Fix segfault when empty pdp type string is given. + Fix segfault when port driver is unknown. + Blacklist: ignore PalmOS devices driven by 'visor' ==== aaa_base ==== Version update (13.2+git20150309.be5760c -> 13.2+git20150428.4b7d6b6) Subpackages: aaa_base-extras - xdg-environment: reduce list in /opt/* to gnome,kde4,kde3 (bnc#910904) - add SOCKS5_SERVER and socks_proxy to proxy settings (bnc#928398) - Simplify version check ==== acpica ==== Version update (20140724 -> 20150410) - Update to acpica version 20150410 - Do not generate acpitools tarball from external kernel repo, but use kernel-source package inside the build service. * Added acpica_remove_date_macro.patch - > This patch got mainline in kernel version 4.0 and can be removed again at some point of time. ==== alsa-utils ==== - Backport upstream fixes, including the fix for alsa-info (boo#928394): 0001-amixer-Don-t-set-only-the-first-item-in-sset_enum.patch 0002-amixer-expand-local-storage-for-item-name-according-.patch 0003-alsa-info-Don-t-try-update-when-wget-isn-t-available.patch ==== apparmor-abstractions ==== Version update (2.9.1 -> 2.9.2) Subpackages: apparmor-docs apparmor-parser apparmor-profiles apparmor-utils libapparmor-devel libapparmor1 libapparmor1-32bit pam_apparmor pam_apparmor-32bit perl-apparmor python3-apparmor - update to AppArmor 2.9.2 (2.9 branch r2911) - lots of bugfixes in the parser and the aa-* tools (including boo#918787) - update dovecot and dnsmasq profiles and several abstractions (including boo#911001) - see http://wiki.apparmor.net/index.php/ReleaseNotes_2_9_2 for the full changelog - remove upstream(ed) patches apparmor-changes-since-2.9.1.diff and apparmor-fix-stl-ostream.diff - replace GPG key with new AppArmor GPG signing key, see https://launchpad.net/apparmor/+announcement/13404 ==== aria2 ==== Subpackages: aria2-lang - Add dependency on libuv for current Tumbleweed - Remove _DATE_ and _TIME_ ==== autoyast2 ==== Version update (3.1.72 -> 3.1.74) Subpackages: autoyast2-installation - New autoinst flag in general/mode section: activate_systemd_default_target. The default target of systemd will be activated in the second stage of autoyast installation. The default is "true" which is a backward compatible value. (bnc#923992) - 3.1.74 - Avoid ayast_probe module crashing when called from an installed system. (bnc#926241) - 3.1.73 ==== brasero ==== Version update (3.12.0 -> 3.12.1) Subpackages: brasero-nautilus libbrasero-burn3-1 libbrasero-media3-1 libbrasero-utils3-1 - Update to version 3.12.1: + Add a symbolic app icon. + Updated translations. ==== btrfsprogs ==== Version update (3.19.1 -> 4.0) Subpackages: libbtrfs0 - version 4.0 * resize: * don't accept file as an argument (it's confusing) * print better error message in case of an error * restore: optionally restore metadata (time, mode, uid/gid) * receive: optionally enforce chroot * new rescue subcommand 'zero-log', same as btrfs-zero-log, but now also part of the main utility * check: * free space checks match kernel, fixes incorrect reports * convert: fix setting of checksum bit if --no-datasum is used * fsck.btrfs: don't print messages * fix quota rescan on PPC64 (mangled ioctl number) * test updates * documentation: files renamed to .asciidoc, misc fixups ==== busybox ==== Version update (1.22.1 -> 1.23.2) - Update to 1.23.2 * for a full list of changes see http://www.busybox.net/news.html - Cleaned up spec file with spec-cleaner - Refreshed patches ==== calibre ==== Version update (2.25.0 -> 2.27.0) - Update to version 2.27.0: * New Features: - Edit metadata dialog: Add a clear button for the publisher. - DOCX Input: Add option to not insert page breaks between endnotes. - calibredb list: Allow outputting the book languages as well. - Italian translation of Quick Start Guide. - Embed metadata: When embedding metadata fails for some books, add an option to show the failed books in the book list. - Animate the main toolbar when a device is connected/dis- connected, to indicate that the contents of the toolbar have changed. * Bug Fixes: - E-book viewer: When printing, print to a PDF file instead of directly to the printer. This fixes printing not working on some systems. - AZW3 Input: Handle kindlegen produced azw3 files that do not use normal HTML anchors for linking. - Fix too many open files errors that could occur in a few places on OS X. - Do not allow user to hide all columns in book list via the context menu, as restoring them becomes difficult. - Update to version 2.26.0: * New Features: - Driver for the soon to be released Kobo Glo HD. * Bug Fixes: - Do not use a separate process to draw the splash screen. This might fix the issue of calibre randomly freezing on startup on a few windows systems. - MOBI Ouput: Fix :first-letter applied to elements containing a comment causing conversion to fail. - Properly display names of libraries containing the ampersand character. - When sorting filenames in comics treat the file extension as a secondary sort key. Fixes xyz.jpg sorting before xyz_1.jpg. - Fix a regression in 2.25 that broke the search & replace wizard in the conversion dialog when converting a book with multiple formats. - Content server: Fix errors when library contains enough virtual libraries to cause grouping. - Manage tags dialog: Fix setting a tag to empty causes an unhandled error. - E-book viewer: Fix a regression that caused the viewer to occasionally skip the last page in a chapter when displaying more than one pages per screen and scrolling by screen. - Edit Book: Fix open OPF file not being refreshed when deleting items from the file browser. * New news sources: - Discover Magazine Monthly by Michael Marotta * Improved news sources: - WirtschaftsWoche Online - Wired - CNN ==== cmpi-provider-register ==== - Do not put empty element (ie the current dir) in LD_LIBRARY_PATH if LD_LIBRARY_PATH is set but empty (bsc#642831) ==== curl ==== Version update (7.42.0 -> 7.42.1) Subpackages: libcurl-devel libcurl4 - update to 7.42.1 * fixes CVE-2015-3153 (bnc#928533) - sensitive HTTP server headers also sent to proxies - rename curl-devel to libcurl-devel in baselibs.conf ==== dnsmasq ==== - Move trust-anchors.conf into /etc/dnsmasq.d to be AppArmor conform. (bnc#908137) ==== docbook-xsl-stylesheets ==== - Fixed bsc#928753 (added missing template directory) - Slightly corrected file list ==== fonts-config ==== Version update (20141207 -> 20150424) - updated to 20150424: * introduce --remove-user-setting option - updated to 20150423: * hide local system family preference list when user's one is in action - updated to 20150421: * use mkpath instead of make_path [bnc#927968] * behave better when /usr/share/fontconfig/conf.avail/30-metric-aliases.conf not found - updated to 20150417: * added --user option ==== git ==== Version update (2.3.5 -> 2.3.7) Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - git 2.3.7: * An earlier update to the parser that disects a URL broke an address, followed by a colon, followed by an empty string (instead of the port number), e.g. ssh://example.com:/path/to/repo. * The completion script (in contrib/) contaminated global namespace and clobbered on a shell variable $x. * The "git push --signed" protocol extension did not limit what the "nonce" that is a server-chosen string can contain or how long it can be, which was unnecessarily lax. Limit both the length and the alphabet to a reasonably small space that can still have enough entropy. - git 2.3.6: * "diff-highlight" (in contrib/) multibyte character support ==== gnome-power-manager ==== Version update (3.16.0 -> 3.16.1) - Update to version 3.16.1: + Add a symbolic variant of the application icon. - Do not call %icon_theme_cache_post(un) macros in %post/%postun for the HighContrast icons, as they are removed. - Stop passing --disable-scrollkeeper to configure, no longer needed nor recognized. - Stop passing V=1 to make, clutters up the buildlog, and debugging is done locally anyway. - Remove conditional for obsolete versions of openSUSE. ==== gnome-shell-search-provider-gnome-weather ==== Version update (3.16.1 -> 3.16.2.1) Subpackages: gnome-weather - Update to version 3.16.2.1: + Provide a symbolic variant of the app icon (bgo#747189). - Update to version 3.16.2: + Honor 12/24 time format in city view (bgo#741533). ==== gnutls ==== Subpackages: libgnutls-devel libgnutls-openssl27 libgnutls30 libgnutls30-32bit - Disable buggy valgrind on armv7l ==== libgom-1_0-0 ==== Version update (0.3.0 -> 0.3.1) - Update to version 0.3.1: + Support g_autoptr() for all gom object types. + Add IS NULL and IS NOT NULL filters. + Add gom_resource_group_delete_[a]sync functions. + Fix crash on 64-bit systems with some compiler/compiler flags. + Fix saving a modified resource a second time. + Fix setting ID after calling gom_resource_group_write_*. - Add a %check section and pass %{__make} test to it. Actually run the already enabled tests. This adds quite a bit to build time, but all testing we can get is good. ==== gpart ==== - Cleanup spec file with spec-cleaner - Do not use url for download as mirrors are gone ==== gpm ==== Subpackages: libgpm2 - Update license: the only GPL3 parts found are in the scripts/ directory, which is not packaged. ==== gstreamer-0_10-plugins-bad ==== Subpackages: libgstbasecamerabinsrc-0_10-23 libgstbasevideo-0_10-23 libgstcodecparsers-0_10-23 libgstphotography-0_10-23 libgstsignalprocessor-0_10-23 libgstvdp-0_10-23 - Add baselibs.conf to sources. - Add gstreamer-0_10-plugins-bad-mp4-overflow.patch -- fix buffer overflow in mp4 parsing (bnc#927559 CVE-2015-0797). - Include libgstgsettingselements.so unconditionally ==== libgtksourceviewmm-3_0-0 ==== Version update (3.2.0 -> 3.12.0) - Update to version 3.12.0: + Deprecated some API because some of the C API was deprecated. + Fix the examples build with recent gtkmm versions. ==== htdig ==== - Cleanup spec file with spec-cleaner - Update dependencies - Update category for devel package - rename htdig-README.SuSE to htdig-README.SUSE ==== hyper-v ==== - Add runlevel script for fcopy daemon in SLE11 (bnc#926534) ==== libImlib2-1 ==== Version update (1.4.6 -> 1.4.7) - Update to 1.4.7 * Prevent division-by-zero crashes * imlib_conv: Use proper buffer size to prevent invalid write of size one * loader_gif: Don't read uninitilized memory in case of invalid input * loader_gif(): Abort gif parsing if DGifGetLine() fails * Fix segfault when opening input/queue/id:000007,src:000000, op:flip1,pos:51 with feh * Make IMAGE_DIMENSIONS_OK() more restrictive * load_pnm: Deal with fread() errors consistently * __imlib_LoadImage(): Additionally check loader_ret to detect loader failures * loader_tga: Abort file loading if the file obviously isn't large enough * imlib_save_image(): Check loader return code for errors * loader_tga.c: Properly signal if decoding uncompressed BGRA data failed * loader_tga.c: Properly signal if decoding RLE compressed data failed * imlib_save_image_with_error_return(): Check loader return code to prevent use of unitialized memor * load_gif: Make sure rows isn't used partly unitialized - Drop imlib2-giflib5.patch ==== install-initrd-openSUSE ==== - buildignore build-compare to avoid hangs ==== iputils ==== - Fix a bogus kernel version check (boo#927831): iputils-remove-bogus-check-required-for-2.4.9-kernels.patch ==== jhead ==== Version update (2.97 -> 3.00) - Update to version 3.00 * Make max comment size 16000 * Added "-zt" option to trim 32k of trailing zeroes from Nikon 1 J2 and J3 images. * Add ability to reset invalid rotation tag (from Moultrie game cameras) - Use url for source - Cleanup spec file with spec-cleaner ==== kdelibs4 ==== Version update (4.14.6 -> 4.14.7) Subpackages: kdelibs4-core kdelibs4-doc libkde4 libkde4-devel libkdecore4 libkdecore4-devel libksuseinstall-devel libksuseinstall1 - Update to 4.14.7 * KDE Applications 15.04.0 * See https://www.kde.org/announcements/announce-applications-15.04.0.php ==== akonadi ==== Version update (4.14.6 -> 4.14.7) Subpackages: akregator blogilo kaddressbook kalarm kdepim4 kjots kmail knode knotes kontact korganizer ktimetracker ktnef libkdepim4 - Update to 4.14.7 * KDE Applications 15.04.0 * See https://www.kde.org/announcements/announce-applications-15.04.0.php ==== kdepim4-runtime ==== Version update (4.14.6 -> 4.14.7) - Update to 4.14.7 * KDE Applications 15.04.0 * See https://www.kde.org/announcements/announce-applications-15.04.0.php ==== kdepimlibs4 ==== Version update (4.14.6 -> 4.14.7) Subpackages: libakonadi4 libkdepimlibs4 libkdepimlibs4-devel - Update to 4.14.7 * KDE Applications 15.04.0 * See https://www.kde.org/announcements/announce-applications-15.04.0.php ==== kernel-default ==== Version update (3.19.4 -> 4.0.0) Subpackages: kernel-default-devel - ftrace/x86/xen: use kernel identity mapping only when really needed (bsc#873195, bsc#886272, bsc#903727, bsc#927725) - commit 63ed720 - scripts/refresh: Obsoleted by refresh_patch.sh - commit d1dd729 - rpm/kernel-obs-build.spec.in: Add .build.hostarch.kvm to the filelist - commit c65f3ca - Update Xen patches to 4.0-final. - commit eee4e07 - rpm/mkspec: Do not build kernel-obs-* on 32bit ppc The buildservice uses the ppc64 kernel-obs-build package for 32bit workers. - commit d1e0beb - create .build.hostarch.kvm for kernel-obs-build OBS needs to know hostarch, with ppc64/ppc64le this is not that easy. Lets create a marker file to help with it. See obs-build commit: e47399d738e51 - commit e5d9da9 ==== kernel-desktop ==== Version update (3.19.4 -> 4.0.0) Subpackages: kernel-desktop-devel - ftrace/x86/xen: use kernel identity mapping only when really needed (bsc#873195, bsc#886272, bsc#903727, bsc#927725) - commit 63ed720 - scripts/refresh: Obsoleted by refresh_patch.sh - commit d1dd729 - rpm/kernel-obs-build.spec.in: Add .build.hostarch.kvm to the filelist - commit c65f3ca - Update Xen patches to 4.0-final. - commit eee4e07 - rpm/mkspec: Do not build kernel-obs-* on 32bit ppc The buildservice uses the ppc64 kernel-obs-build package for 32bit workers. - commit d1e0beb - create .build.hostarch.kvm for kernel-obs-build OBS needs to know hostarch, with ppc64/ppc64le this is not that easy. Lets create a marker file to help with it. See obs-build commit: e47399d738e51 - commit e5d9da9 ==== kernel-docs ==== Version update (3.19.4 -> 4.0.0) - ftrace/x86/xen: use kernel identity mapping only when really needed (bsc#873195, bsc#886272, bsc#903727, bsc#927725) - commit 63ed720 - scripts/refresh: Obsoleted by refresh_patch.sh - commit d1dd729 - rpm/kernel-obs-build.spec.in: Add .build.hostarch.kvm to the filelist - commit c65f3ca - Update Xen patches to 4.0-final. - commit eee4e07 - rpm/mkspec: Do not build kernel-obs-* on 32bit ppc The buildservice uses the ppc64 kernel-obs-build package for 32bit workers. - commit d1e0beb - create .build.hostarch.kvm for kernel-obs-build OBS needs to know hostarch, with ppc64/ppc64le this is not that easy. Lets create a marker file to help with it. See obs-build commit: e47399d738e51 - commit e5d9da9 ==== kernel-pv-devel ==== Version update (3.19.4 -> 4.0.0) - ftrace/x86/xen: use kernel identity mapping only when really needed (bsc#873195, bsc#886272, bsc#903727, bsc#927725) - commit 63ed720 - scripts/refresh: Obsoleted by refresh_patch.sh - commit d1dd729 - rpm/kernel-obs-build.spec.in: Add .build.hostarch.kvm to the filelist - commit c65f3ca - Update Xen patches to 4.0-final. - commit eee4e07 - rpm/mkspec: Do not build kernel-obs-* on 32bit ppc The buildservice uses the ppc64 kernel-obs-build package for 32bit workers. - commit d1e0beb - create .build.hostarch.kvm for kernel-obs-build OBS needs to know hostarch, with ppc64/ppc64le this is not that easy. Lets create a marker file to help with it. See obs-build commit: e47399d738e51 - commit e5d9da9 ==== kernel-devel ==== Version update (3.19.4 -> 4.0.0) Subpackages: kernel-macros kernel-source - ftrace/x86/xen: use kernel identity mapping only when really needed (bsc#873195, bsc#886272, bsc#903727, bsc#927725) - commit 63ed720 - scripts/refresh: Obsoleted by refresh_patch.sh - commit d1dd729 - rpm/kernel-obs-build.spec.in: Add .build.hostarch.kvm to the filelist - commit c65f3ca - Update Xen patches to 4.0-final. - commit eee4e07 - rpm/mkspec: Do not build kernel-obs-* on 32bit ppc The buildservice uses the ppc64 kernel-obs-build package for 32bit workers. - commit d1e0beb - create .build.hostarch.kvm for kernel-obs-build OBS needs to know hostarch, with ppc64/ppc64le this is not that easy. Lets create a marker file to help with it. See obs-build commit: e47399d738e51 - commit e5d9da9 ==== kernel-syms ==== Version update (3.19.4 -> 4.0.0) - ftrace/x86/xen: use kernel identity mapping only when really needed (bsc#873195, bsc#886272, bsc#903727, bsc#927725) - commit 63ed720 - scripts/refresh: Obsoleted by refresh_patch.sh - commit d1dd729 - rpm/kernel-obs-build.spec.in: Add .build.hostarch.kvm to the filelist - commit c65f3ca - Update Xen patches to 4.0-final. - commit eee4e07 - rpm/mkspec: Do not build kernel-obs-* on 32bit ppc The buildservice uses the ppc64 kernel-obs-build package for 32bit workers. - commit d1e0beb - create .build.hostarch.kvm for kernel-obs-build OBS needs to know hostarch, with ppc64/ppc64le this is not that easy. Lets create a marker file to help with it. See obs-build commit: e47399d738e51 - commit e5d9da9 ==== kernel-xen ==== Version update (3.19.4 -> 4.0.0) Subpackages: kernel-xen-devel - ftrace/x86/xen: use kernel identity mapping only when really needed (bsc#873195, bsc#886272, bsc#903727, bsc#927725) - commit 63ed720 - scripts/refresh: Obsoleted by refresh_patch.sh - commit d1dd729 - rpm/kernel-obs-build.spec.in: Add .build.hostarch.kvm to the filelist - commit c65f3ca - Update Xen patches to 4.0-final. - commit eee4e07 - rpm/mkspec: Do not build kernel-obs-* on 32bit ppc The buildservice uses the ppc64 kernel-obs-build package for 32bit workers. - commit d1e0beb - create .build.hostarch.kvm for kernel-obs-build OBS needs to know hostarch, with ppc64/ppc64le this is not that easy. Lets create a marker file to help with it. See obs-build commit: e47399d738e51 - commit e5d9da9 ==== kmod ==== Version update (19 -> 20) Subpackages: kmod-compat libkmod2 - Update to kmod 20 * More robust ELF parsing * To fix a race, modprobe only looks at modules.builtin to determine a builtin module, so e.g. 'modprobe vt' will no longer work. * Other fixes * Testsuite moved to a separate package, since it is now building the test modules from sources, which requires the kernel package. * dropped kmod-blacklist-fixtest.patch (merged upstream) ==== libcacard0 ==== Version update (2.2.0 -> 2.3.0) - Update to v2.3.0: See http://wiki.qemu-project.org/ChangeLog/2.3 - Update to v2.3.0-rc4: See http://wiki.qemu-project.org/ChangeLog/2.3 - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches added: 0039-s390x-Fix-stoc-direction.patch - Update to v2.3.0-rc3: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped (applied upstream): 0037-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch * Patches renamed: 0038-linux-user-Allocate-thunk-size-dyna.patch -> 0037-linux-user-Allocate-thunk-size-dyna.patch * Patches added: 0038-Revert-Revert-seccomp-tests-that-al.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 - Fix qemu-linux-user on powerpc * Patches added: 0038-linux-user-Allocate-thunk-size-dyna.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped: 0030-net-Warn-about-default-MAC-address.patch * Patches renamed: 0031-console-add-question-mark-escape-op.patch -> 0030-console-add-question-mark-escape-op.patch 0032-Make-char-muxer-more-robust-wrt-sma.patch -> 0031-Make-char-muxer-more-robust-wrt-sma.patch 0033-linux-user-lseek-explicitly-cast-no.patch -> 0032-linux-user-lseek-explicitly-cast-no.patch 0034-virtfs-proxy-helper-Provide-__u64-f.patch -> 0033-virtfs-proxy-helper-Provide-__u64-f.patch 0035-configure-Enable-PIE-for-ppc-and-pp.patch -> 0034-configure-Enable-PIE-for-ppc-and-pp.patch 0036-qtest-Increase-socket-timeout.patch -> 0035-qtest-Increase-socket-timeout.patch 0037-AIO-Reduce-number-of-threads-for-32.patch -> 0036-AIO-Reduce-number-of-threads-for-32.patch 0038-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch -> 0037-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches added: 0038-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch - Update to v2.3.0-rc2: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped: 0038-fw_cfg-test-Fix-test-path-to-includ.patch 0039-rcu-tests-fix-compilation-on-32-bit.patch - Update to v2.3.0-rc1: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped (upstreamed): 0038-linux-user-Fix-emulation-of-splice-.patch 0039-ide-fix-cmd_write_pio-when-nsectors.patch 0040-ide-fix-cmd_read_pio-when-nsectors-.patch 0041-ahci-Fix-sglist-offset-manipulation.patch 0042-ahci-test-improve-rw-buffer-pattern.patch 0045-linux-user-fix-broken-cpu_copy.patch * Patches renamed: 0043-fw_cfg-test-Fix-test-path-to-includ.patch -> 0038-fw_cfg-test-Fix-test-path-to-includ.patch 0044-rcu-tests-fix-compilation-on-32-bit.patch -> 0039-rcu-tests-fix-compilation-on-32-bit.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches added: 0045-linux-user-fix-broken-cpu_copy.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped: 0044-rcutorture-fix-compilation-on-32-bi.patch * Patches added: 0044-rcu-tests-fix-compilation-on-32-bit.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches added: 0043-fw_cfg-test-Fix-test-path-to-includ.patch 0044-rcutorture-fix-compilation-on-32-bi.patch - Update to v2.3.0-rc0: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped: 0030-Legacy-Patch-kvm-qemu-preXX-report-.patch * Patches added: 0030-net-Warn-about-default-MAC-address.patch 0039-ide-fix-cmd_write_pio-when-nsectors.patch 0040-ide-fix-cmd_read_pio-when-nsectors-.patch 0041-ahci-Fix-sglist-offset-manipulation.patch 0042-ahci-test-improve-rw-buffer-pattern.patch ==== libdrm-devel ==== Subpackages: libdrm2 libdrm2-32bit libdrm_intel1 libdrm_intel1-32bit libdrm_nouveau2 libdrm_nouveau2-32bit libdrm_radeon1 libdrm_radeon1-32bit libkms1 - U_nouveau-Do-not-add-most-bo-s-to-the-global-bo-list.patch U_nouveau-make-nouveau-importing-global-buffers-comple.patch * reverse apply these patches in order to fix a regression in 2.4.60 triggered by new legacy tray in GNOME 3.16.0 (fdo#89842) ==== libinput-devel ==== Version update (0.13 -> 0.14) Subpackages: libinput-udev libinput10 - Update to version 0.14.1: * libinput now provides middle button emulation for physical buttons and, for some devices, a configuration interface to enable said emulation. * A new tool "libinput-list-devices" was added. This tool lists the locally recognised devices and their respective configuration options and configuration defaults. Note that due to the design of libinput, this tool can only show the _default_ configurations, not the _current_ configuration of each device. * The pointer acceleration range has been widened to allow for greater deceleration and greater acceleration. Since we retain the [-1, 1] range, you may see a slight slowdown or speedup. To get the previous behaviour, use the value: current setting * 2.0/3.0. * Five (or more) finger tapping is now handled correctly, though note we only send events for up to three fingers. libinput now supports multi-tap and drag, so e.g. three taps will execute a triple-click. * Palm detection now avoids accidental tapping, see http://wayland.freedesktop.org/libinput/doc/latest/palm_detection.html * And of course the usual bugfixing, including letting libinput handle more devices such as keyboards with scroll wheels or devices that only consist of a wheel. - Add tool subpackage. ==== libmng-devel ==== Version update (2.0.2 -> 2.0.3) Subpackages: libmng2 libmng2-32bit - Update to 2.0.3 * More changes to libmng_types.h. - Cleanup spec file with spec-cleaner - Remove old obsolete/provide - Use %cmake macro when building - Remove no longer needed fix-header-include.patch ==== libmtp-devel ==== Subpackages: libmtp9 - Package whole udev related dirs to avoid build failures ==== libhogweed4 ==== Version update (3.1 -> 3.1.1) Subpackages: libhogweed4-32bit libnettle-devel libnettle6 libnettle6-32bit - nettle 3.1.1 Non-critical bugfix release, binary compatible to 3.1 * By accident, nettle-3.1 disabled the assembly code for the secp_224r1 and secp_521r1 elliptic curves on all x86_64 configurations, making signature operations on those curves 10%-30% slower. This code is now re-enabled. * The x86_64 assembly implementation of gcm hashing has been fixed to work with the Sun/Oracle assembler. ==== gstreamer-0_10-libnice ==== Version update (0.1.11 -> 0.1.12) Subpackages: gstreamer-libnice libnice10 - Update to version 0.1.12: + Fix regression in SDP parser. + Make examples work on Windows. + Bug fixes on nicesrc. ==== libpcap1 ==== Version update (1.7.2 -> 1.7.3) Subpackages: libpcap1-32bit - libpcap 1.7.3: * work around a Linux bonding driver bug. ==== libltdl7 ==== Version update (2.4.2 -> 2.4.6) Subpackages: libltdl7-32bit libtool - Remove empty entry. - Use url for signature - Add keyring file for automatic verification of signature - Cleanup spec file with spec-cleaner - Remove old ppc/ppc64 obsolete/provides - Update info pre/post requires and replace postun with preun - Update to 2.4.6: Noteworthy changes in release 2.4.6 (2015-02-15) [stable] * New features: - LT_SYS_LIBRARY_PATH can be set in config.site, or at configure time and persists correctly in the generated libtool script. * Bug fixes: - Fix a race condition in ltdl dryrun test that would cause spurious random failures of that test. - LT_SYS_DLSEARCH_PATH is munged correctly. - Add tarball signature. - Add libtool-no_host_name.patch to remove the host name from generated scripts (bnc#916268). - Update to libtool 2.4.5 New features: - Libtoolize searches for the best available M4 on the user PATH at runtime, rather than settling for the first one found. - Support munging sys_lib_dlsearch_path_spec with LT_SYS_LIBRARY_PATH environment variable. Bug fixes: - Bail out at configure time if the installed M4 is not sufficient for the purposes of libtoolize. - freebsd-elf library versioning was upgraded incorrectly in 2.4.4, but now works properly again. - Fix a 2.4.4 regression so that libltdl subprojects do not warn about missing libltdl/libltdl directory as in prior releases. - When using Sun C++ on Solaris or GNU/Linux we used to set libtool's postdeps permanently, based on the contents of $CXX and $CXXFLAGS at configure time, which was brittle and error-prone. Now, we no longer check for a SunCC ABI at configure time, but augment the postdeps at libtool time based on the current invocation flags on each call. Changes in supported systems or compilers: - /usr/local prefixed rpaths are now added to the link-line on ia64-hp-hpux*, because the default system runtime loader path does not contain them. - Previously, when using Sun C++ on Solaris or GNU/Linux, `-Cstd -Crun` flags were added to $postdeps unless CXX or CXXFLAGS contained `-library=stlport4`. Newer releases have added other compiler flags that are also incompatible with `-Cstd -Crun`, so now we don't add them if any of `-std=c++[0-9][0-9]`, `-library=stdcxx4` or `-compat=g` were found in CXX or CXXFLAGS when the Sun C++ compiler is detected. - Require M4 as libtool's libtoolize requires it since 2.4.3 - Drop patch libtool-dont_delete_gnulib_files.patch which is included in 2.4.4 - Update to libtool 2.4.4 * * New features: - Libltdl maintains its own fork of argz, with macros and files in the LT_ and lt__ namespaces (resp.) where they cannot clash with client projects' use of gnulib argz. * * Bug fixes: - Installation of 'libtoolize' once again obeys '--program-prefix', '--program-suffix' and '--program-transform-name' configure options. - `libtoolize` doesn't remove any files that it can't reinstall, including old versions of the snippet directory, and gnulib's version of the argz module and supporting files. - LT_FUNC_DLYSM_USCORE now works correctly on systems that don't support self dlopen()ing. * * Important incompatible changes: - LT_LIB_DLLOAD no longer prepends -ldl or -ldld to LIBS, causing duplicate occurrences in libltdl link lines. If you need to add a library for dlopen() or shl_load() in your Makefile, then use $(LIBADD_DLOPEN) or $(LIBADD_SHL_LOAD) respectively. If you are using libltdl, this all happens automatically, and the only difference you'll see is no more duplicated library names in the verbose link line. * * Changes in supported systems or compilers: - Preliminary support for tcc on linux*. Although it already worked sometimes in previous releases, making sure to set LD correctly now avoids mis-matching GNU ld with tcc: ./configure CC=tcc LD=tcc - Added -os2dllname option to work around 8 character base name limit on OS/2. The option has no effect on other systems. - Support for DLL versioning, -export-symbols and -export-symbols-regex on OS/2. - Support filename-based shared library versioning on AIX. See manual for details. - - Add libtool-dont_delete_gnulib_files.patch that prevents deletion of files from gnulib to be deleted by libtoolize. - BuildRequire help2man. - Remove unneeded clean section. - Use rpm macros where possible. - Pass V=1 to make to make compilation verbose. - Drop patch config-guess-sub-update.patch for libltdl/config as the folder no longer exists. - Drop patch libtool-ppc64le.patch for ppc handling as it is already part of v2.4.3 - Update to libtool 2.4.3 * * New features: - Moved to gnulib release infrastructure. - M4 is now used for scanning the M4 macros in your configure.ac that 'libtoolize' looks at to determine what files you want, and where you would like them installed. This means that you can compose your version number or any other argument that Libtoolize needs to know at M4 time using git-version-gen from gnulib, for example. - Invoking 'libtoolize --ltdl' no longer maintains a separate autoconf macro directory in the libltdl tree, but automatically adjusts the installed libltdl configuration files to share whatever macro directory is declared by the parent project. (Note: if you were already sharing a macro directory with AC_CONFIG_MACRO_DIR(ltdl/m4) or similar, that still works as does any other directory choice). - Invoking 'libtoolize --ltdl' no longer maintains a separate auxiliary scripts directory in the libltdl tree, but automatically adjusts the installed libltdl configuration files to share whatever auxiliary scripts directory is declared by the parent project. (Note: if you were already sharing an auxiliary directory with subproject libltdl using AC_CONFIG_AUX_DIR(ltdl/config) or similar, that still works as does any other directory choice). - The legacy tests have all been migrated to the Autotest harness. - The Autotest testsuite can be run without the especially time consuming tests with: make check-local TESTSUITEFLAGS='-k "!expensive"' * * Bug fixes: - Fix a long-standing latent bug in autom4te include path for autotests with VPATH builds. - Fix a long-standing latent bug in libtoolize that could delete lines from libltdl/Makefile.am in recursive mode due to underquoting in a sed script. - Fix a long-standing bug in libtoolize, by outputting the 'putting auxiliary files in' header with 'libtoolize --ltdl --subproject'. - Fix a long-standing bug in libtoolize subproject installation, by not installing a set of autoconf macro files into the parent project if there is no configure.ac present to use them. - The libtoolize subproject mode selector is now named '--subproject' and is equivalent to the implied '--subproject' mode when no other mode is selected; '--standalone' never worked, and is no longer accepted. - Libtool and libtoolize no longer choke on paths with a comma in them. - In the case where $SHELL does not have the same enhanced features (e.g. the ability to parse 'var+=append') as $CONFIG_SHELL, libtool will now correctly fallback to using only vanilla shell features instead of failing with a parse at startup. - Correctly recognize import libraries when Microsoft dumpbin is used as the name lister and extend the dumpbin wrapper to find symbols in import libraries using the -headers option of dumpbin. Also fix a bug in the dumpbin wrapper that could lead to broken symbol listings in some corner cases. - Use the improved Microsoft dumpbin support to mend preloading of import libraries for Microsoft Visual C/C++. - No longer mangle module-definition (.def) files when feeding them to the Microsoft Visual C/C++ linker via the -export-symbols argument to the libtool script, thus matching how .def files are handled when using GNU tools. - Recognize more variants (e.g. those starting with a LIBRARY statement) of module-definitions (.def) files when using them instead of a raw list of symbols to export. - Fix a long-standing bug when using libtoolize without automake; we no longer remove install-sh with --force, since it's not a file libtoolize will reinstall without --install.. * * Important incompatible changes: - GNU M4 is required to run libtoolize in a directory with a 'configure.ac' (or 'configure.in') that needs tracing to determine what modes and directories have been specified. - The use of the idiosyncratically named 'Makefile.inc' in nonrecursive libltdl builds is deprecated, although it will be supported for one more year or until the next release, whichever takes longer. Please upgrade to the more standard naming of 'ltdl.mk' in keeping with other GNU projects. - libtoolize now behaves consistenty in respect of multiple directory arguments to ACLOCAL_AMFLAGS and multiple invocations of AC_CONFIG- _MACRO_DIRS, where the first directory is always selected. Previous releases took the first ACLOCAL_AMFLAGS argument, but the last invocation of AC_CONFIG_MACRO_DIRS. - The libtoolize program now advises use of the new Autoconf AC_CONFIG_MACRO_DIRS declaration. If you follow that advice, all your developers will need at least autoconf-2.70 and automake-1.13 to rebootstrap your probject. If you still need to support bootstrap with older Autotools, then you should add the following to your configure.ac file: m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_define([AC_CONFIG_MACRO_DIRS], m4_defn([AC_CONFIG_MACRO_DIR]))]) - Overhead of probing for a non-backslash crippled echo equivalent during initialization of every script has been removed in favor of trusting that "printf %s\n" works out of the box on all non-museum host architectures. Manually setting ECHO appropriately in the build environment will be necessary on some ancient architectures. * * Changes in supported systems or compilers: - Support for bitrig (*-*-bitrig*). - Solaris 7 and earlier requires ECHO=/usr/ucb/echo in the build environment, to build and use libtool. ==== libwacom-data ==== Version update (0.12 -> 0.13) Subpackages: libwacom2 - Update to version 0.13: + New devices: - DTU-1141. - Huion H610 Pro. + Several memory leak fixes. + Added libwacom_match_get_name() to allow data-file matching on the name as well as the pid/vid. ==== libyajl2 ==== - Use correct url for download - Add dependency on doxygen for doc generation - Cleanup spec file with spec-clener ==== linux-glibc-devel ==== Version update (3.17 -> 4.0) - Update to kernel headers 4.0 ==== libLLVM ==== Version update (3.5.0 -> 3.6.0) Subpackages: libLLVM-32bit - Add llvm-fix-parsearmarch.patch to fix parsing armv{6,7}hl archs. - Update to version 3.6.0 * See http://llvm.org/releases/3.6.0/docs/ReleaseNotes.html - Add python-xml dependency for regression tests - Removed the following patches, fixed upstream: * arm-remove-xfails.diff * libcxx-libdir.patch * llvm-config-lib64.patch * llvm-fix-intrusiverefcntptr.patch ==== libmysqlclient-devel ==== Version update (10.0.14 -> 10.0.17) Subpackages: libmysqlclient18 libmysqlclient18-32bit libmysqlclient_r18 libmysqld18 mariadb mariadb-client mariadb-errormessages - fix parent directory has insecure permissions error - disable optional features for mariadb * still possible to use them from mariadb_100 package - Adjust _constraints. 11GB is not enough for ppc64 builds, increase to 13GB - Updated to the version 10.0.17 * Release notes: http://kb.askmonty.org/v/mariadb-10017-release-notes * Changelog: http://kb.askmonty.org/v/mariadb-10017-changelog - merged patches to packaging git and regenerated * few fixes mainly to upgrades - README.SuSE is now README.SUSE; fix name in some places. - Fix undefined initial status in systemd script (boo #914370) - Fix include dir in alternative cnf files (bnc #859345) - run spec cleaner on spec - update to 10.0.15 * Release notes: http://kb.askmonty.org/v/mariadb-10015-release-notes * Changelog: http://kb.askmonty.org/v/mariadb-10015-changelog - conditionally enable more storage engines - updated packaging to the latest templates ==== myspell-cs_CZ ==== Subpackages: myspell-da_DK myspell-de myspell-de_DE myspell-dictionaries myspell-el_GR myspell-en myspell-en_GB myspell-en_US myspell-es myspell-es_ES myspell-fr_FR myspell-hu_HU myspell-it_IT myspell-lightproof-en myspell-lightproof-hu_HU myspell-lightproof-pt_BR myspell-lightproof-ru_RU myspell-pl_PL myspell-pt_BR myspell-ru_RU - fix build for 11sp3 - remove Obsoletes: bits from myspell-dictionaries rpm which we provide in language sub-subpackages ==== obs-service-source_validator ==== Version update (0.5 -> 0.5+git20150420.23830c1) - Update to version 0.5+git20150420.23830c1: + Verify if the packages referenced by baselibs.conf are actually being built. + Check for disallowed services before missing files (#16) + add support for %autosetup and %autopatch - use proper versioning in _service file and generate changes entry ==== libopenal1 ==== Subpackages: libopenal1-32bit openal-soft - Use %cmake_install macro - Add dependency on pkg-config - Remove missingok from ghost file, it should not be needed ==== openmpi-libs ==== - don't package test suite logs - noone reads them anyway and it would require latest automake - don't autogen.sh - upstream tar should be enough for anyone (fixes build with latest libtool) ==== optipng ==== - Cleanup spec file with spec-clener - Update dependencies - Enable checks ==== osc ==== - Recommend sudo (needed for osc build) ==== perl-Bootloader ==== Version update (0.832 -> 0.833) Subpackages: perl-Bootloader-YAML - Escape/unescape special characters on write/read (bsc#831791) - 0.833 ==== perl-ExtUtils-PkgConfig ==== Version update (1.15 -> 1.150000) - extend version to 6 digits to avoid problems with >= 1.121 ==== exiftool ==== Version update (9.92 -> 9.93) Subpackages: perl-File-RandomAccess perl-Image-ExifTool - Update to 9.93: - Add FileTypeExtension tag. - Add a few new CanonModelID values. - Add a new Olympus CameraType. - Add a few new Minolta/Sony lenses. - Update arg_files/iptcCore.args for IPTC Extension version 1.2 tags. - Improve VCard parsing/decoding. - Improve -fast3 file identification logic. - Remove "px" string from SVG ImageWidth/Height tags. - Change DOF calculation to use ApproximateFocusDistance. - Fix missing FileType for MOI files. - Fix potential "Internal Error" bug when writing XMP structures. ==== perl-MIME-tools ==== Version update (5.504 -> 5.506) - updated to 5.506 see /usr/share/doc/packages/perl-MIME-tools/ChangeLog ==== perl-PPI ==== Version update (1.218 -> 1.220) - ignore File::Spec - it's tricky - updated to 1.220 see /usr/share/doc/packages/perl-PPI/Changes 1.220 Tue 11 Nov 2014 Summary: - incompatible behavior fixes on PPI::Statement::Sub->prototype - improved parsing of various syntax elements - code quality improvements - various small documentation fixes Details: - {} is now recognized as anonymous hash constructor instead of a code block after these operators: &&= //= || && // ? : (GitHub #36) (MOREGAN) - regex capture variables greater than $9 are now parsed completely, instead of being parsed as single digit captures with numbers after them (GitHub #38) (MOREGAN) - DESTROY and AUTOLOAD subs are now parsed even without the sub keyword (GitHub #39) (MOREGAN) - PPI::Statement::Sub->prototype behavior now matches its documentation, instead of returning the prototype string unchanged and still including the parens (GitHub #56) (MOREGAN) - PPI::Statement::Sub->prototype now returns undef on subs without a prototype, instead of returning an empty string (GitHub #56) (MOREGAN) - list of keywords which are not parsed as packages when followed by the Perl4 package separator ' has been increased (GitHub #77) (MOREGAN) - application of a number of Perl::Critic policies and documentation fixes (GitHub #53) (MOREGAN, MITHALDU) - automation of README.md generation for git (GitHub #86) (COWENS) - various small documentation fixes (Github #96) (MOREGAN) ==== perl-Test-Exception ==== Version update (0.38 -> 0.380000) - extend version to 6 digits to avoid problems with > 0.331 ==== perl-Time-Duration ==== Version update (1.1 -> 1.200000) - updated to 1.20 see /usr/share/doc/packages/perl-Time-Duration/Changes - extend the version to 6 digits to avoid >= 1.06 not matching 1.1 ==== perl-XML-LibXML ==== Version update (2.0116 -> 2.0119) - updated to 2.0119 see /usr/share/doc/packages/perl-XML-LibXML/Changes 2.0119 2015-04-23 - Preserve unset options after a _clone() call (e.g: in load_xml()). - This caused expand_entities(0) to not be preserved/etc. - Thanks to Tilmann Haak from xing.com for the report. - updated to 2.0118 see /usr/share/doc/packages/perl-XML-LibXML/Changes 2.0118 2015-02-05 - Add $Config{incpath} to the include paths on Win32. - Fixes https://rt.cpan.org/Ticket/Display.html?id=101944 - Thanks to Marek for the report and propsed fix. 2.0117 2014-10-26 - Support libxml2 builds with disabled xmlReader - Makefile.PL : don't require a recentish ExtUtils::MakeMaker. - https://rt.cpan.org/Ticket/Display.html?id=83322 - Thanks to Slaven Rezic for the report. - Fix broken t/02parse.t with non-English locale with recent perls. - https://rt.cpan.org/Public/Bug/Display.html?id=97805 - Thanks to Slaven Rezic for the report. ==== perl-YAML ==== Version update (0.97 -> 1.15) - updated to 1.15 see /usr/share/doc/packages/perl-YAML/Changes 1.15 Sat Apr 18 17:03:09 CEST 2015 - Fix Issue - Don't require newlines at end of YAML. - updated to 1.14 see /usr/share/doc/packages/perl-YAML/Changes 1.14 Sat Jan 17 15:32:18 PST 2015 - Apply PR/145 from @kentnl++ - Support for QuoteNumericStrings Global Setting 1.13 Sat Oct 11 18:05:45 CEST 2014 - Apply PR/140 from @nfg++ - Disable some warnings in YAML::Any 1.12 Mon Sep 22 08:24:43 PDT 2014 - Fix https://rt.cpan.org/Ticket/Display.html?id=97870 1.11 Fri Aug 29 20:08:20 PDT 2014 - Apply PR/139. @ehuelsmann++ 1.10 Thu Aug 28 22:53:26 PDT 2014 - Apply PR/138. @ehuelsmann++ 1.09 Tue Aug 19 16:41:13 PDT 2014 - Replace tabs with spaces 1.08 Mon Aug 18 10:21:48 PDT 2014 - Dep on Test::YAML 1.05 1.07 Mon Aug 18 08:40:01 PDT 2014 - Apply PR/8 from shlomif++. Add doc examples for YAML::Any. 1.06 Sat Aug 16 16:51:08 PDT 2014 - Change testdir to t 1.05 Sat Aug 16 13:03:28 PDT 2014 - Meta 0.0.2 1.04 Sat Aug 16 04:28:10 PDT 2014 - Eliminate spurious trailing whitespace 1.03 Sat Aug 16 03:32:35 PDT 2014 - Eliminate File::Basename from test/ 1.02 Fri Aug 15 21:09:54 PDT 2014 - Add t/000-compile-modules.t 1.01 Thu Aug 7 14:48:24 PDT 2014 - Dep on patched Test::YAML 1.00 Thu Aug 7 00:35:21 PDT 2014 - Fix bad encoding in Pod 0.99 Wed Aug 6 17:55:42 PDT 2014 - Switch to external Test::Base 0.98 Wed Jul 30 12:32:25 PDT 2014 - Fix indexing of YAML::Any - Change IRC to irc.perl.org#yaml ==== postfix ==== Version update (2.11.4 -> 2.11.5) Subpackages: postfix-doc - added postfix-2.11.5_linux4.patch: Allow building on kernel 4. Patch taken from: https://groups.google.com/forum/#!topic/mailing.postfix.users/fufS22sMGWY - update to postfix 2.11.5 - Bugfix (introduced: Postfix 2.6): sender_dependent_relayhost_maps ignored the relayhost setting in the case of a DUNNO lookup result. It would use the recipient domain instead. Viktor Dukhovni. Wietse took the pieces of code that enforce the precedence of a sender-dependent relayhost, the global relayhost, and the recipient domain, and put that code together in once place so that it is easier to maintain. File: trivial-rewrite/resolve.c. - Bitrot: prepare for future changes in OpenSSL API. Viktor Dukhovni. File: tls_dane.c. - Incompatibility: specifying "make makefiles" with "CC=command" will no longer override the default WARN setting. ==== powertop ==== Subpackages: powertop-lang - Exchange xterm for xterm-bin Requires, as the xterm.desktop file is not needed. ==== python-boto ==== Version update (2.34.0 -> 2.38.0) - update to version 2.38.0: * Add support for Amazon Machine Learning * Fix issue with modify reserved instances for modifying instance type - additional changes from version 2.37.0: * Update AWS CloudTrail to the latest API. * Add support for UsePreviousValue to CloudFormation UpdateStack. * Fix BOTH_PATH to work with Windows drives * Fix division calculation in S3 docs. * Add Boto 3 link in README. * Add more regions for configservice * Add ``eu-central-1`` endpoints (Frankfurt region) for IAM and Route53 * Fix unit tests from hanging * Fixed wording in dynamodb tutorial * Update SWF objects to keep a consistent region name. * Print archive ID in glacier upload script. * Add some minor documentation for Route53 tutorial. * Add Amazon DynamoDB online indexing support on High level API * Ensure Content-Length header is a string. * Correct docs around overriding SGs on ELBs * Fix DynamoDB tests. * Fix region bug. * Fix import for ``boto.cloudhsm.layer1.CloudHSMConnection``. - additional changes from version 2.36.0: * Add Amazon DynamoDB online indexing support. * Allow for binary to be passed to sqs message * Kinesis update * Fixed spelling of boto.awslambda package. * Add support for Amazon EC2 Container Service * Add support for CloudHSM * Add support for AWS Config * Add support for AWS CodeDeploy * Add support for AWS Lambda * Update both Cognito's to the latest APIs * Add sts for eu-central-1. * Update opsworks to latest API * Add AWS Key Managment Support - additional changes from version 2.35.2: * Add support for new data types in DynamoDB. * Expose cloudformation `UsePreviousTemplate` parameter. * Fix documentation around using custom connections for DynamoDB tables. * Fixed bug that unable call query_2 after call describe method on dynamodb2 module. - additional changes from version 2.35.1: * Check for results left after computing self._keys_left - additional changes from version 2.35.0: * Add Amazon EC2 Classic Link support * Add query string to body for anon STS POST * Fix bug that prevented initializing a dynamo item from existing item * switchover-sigv4: Add integ tests for sigv4 switchover Switch elb/ec2 over to signature version 4 * Return SetStackPolicyResponse * Added ELB Attributes to docs. * Fix bug by using correct string joining syntax. * Fix SES get_identity_dkim_attributes when input length > 1. * DynamoDB table batch_get fails to process all remaining results if single batch result is empty. * Added suppport for additional fields in EMR objects. * Pass version_id in copy if key is versioned. * Add support for SQS PurgeQueue operation. * Update documentation for launchconfig. * Remove unimplemented config param. * Add support for private hosted zones. * Fix Key.change_storage_class so that it obeys dst_bucket. * Fix for s3put host specification. * Improve handling of Glacier HTTP 204 responses. * Fix raising exception syntax in Python 3. * Privatezone: Adding unit/integration test coverage * Minor documentation/pep8 fixes. * Correct argument type in doc string. * Use exclusive start key to get all items from DynamoDB query. * Updated link to current config documentation. * Fix the SQS certificate error for region cn-north-1. * Adds support for getting health checker IP ranges from Route53. * fix: snap.create_volume documentation lists general purpose ssd Fixes @2774. * Fixed param type in get_contents_to_filename docstring. * Update DynamoDB local example to include fake access key id. * Added 'end' attribute to ReservedInstance. * Parse ClusterStatus?s StateChangeReason. * Adds SupportedProducts field to EMR JobFlow objects. * Fix EMR endpoint. * Detect old-style S3 URL for auto-sigv4. * Throw host warning for cloudsearch domain * Fix CloudSearch2 to work with IAM-based search and upload requests * iam: add support for Account Password Policy APIs * Handle sigv4 non-string header values properly * Url encode query string for pure query - update project URL - point source URL to pypi - build python-boto-doc as a subpackage: * delete separate spec and changes file * merge entries of python-boto-doc.changes in python-boto.changes * add python-Sphinx as BuildRequires * break the dependency between the doc generation and boto by modifying Sphinx configuration file - delete shebang of python file instead of setting them executable ==== python-setuptools ==== Version update (5.4.1 -> 15.1) - Disable testsuite as this causes build cycle - update to 15.1: * Updated Packaging to 15.1 to address Packaging #28. * Fix ``setuptools.sandbox._execfile()`` with Python 3.1. - Remove fix-type-error.patch . Applied upstream - openSUSE versions up to 12.2 are affected as well from: AssertionError: error: must supply either home or prefix/exec-prefix -- not both raise version check of applying fix-sle11-test-failure.patch accordingly - update to 15.0: * Pull Request #126: DistributionNotFound message now lists the package or packages that required it. E.g.:: pkg_resources.DistributionNotFound: The 'colorama>=0.3.1' distribution was not found and is required by smlib.log. Note that zc.buildout once dependended on the string rendering of this message to determine the package that was not found. This expectation has since been changed, but older versions of buildout may experience problems. See Buildout #242 for details. * Issue #307: Removed PEP-440 warning during parsing of versions in ``pkg_resources.Distribution``. * Issue #364: Replace deprecated usage with recommended usage of ``EntryPoint.load``. * Issue #254: When creating temporary egg cache on Unix, use mode 755 for creating the directory to avoid the subsequent warning if the directory is group writable. * Issue #137: Update ``Distribution.hashcmp`` so that Distributions with None for pyversion or platform can be compared against Distributions defining those attributes. * Issue #360: Removed undesirable behavior from test runs, preventing write tests and installation to system site packages. * Pull Request #125: Add ``__ne__`` to Requirement class. * Various refactoring of easy_install. * Bootstrap script now accepts ``--to-dir`` to customize save directory or allow for re-use of existing repository of setuptools versions. See Pull Request #112 for background. * Issue #285: ``easy_install`` no longer will default to installing packages to the "user site packages" directory if it is itself installed there. Instead, the user must pass ``--user`` in all cases to install packages to the user site packages. This behavior now matches that of "pip install". To configure an environment to always install to the user site packages, consider using the "install-dir" and "scripts-dir" parameters to easy_install through an appropriate distutils config file. * Issue #359: Include pytest.ini in the sdist so invocation of py.test on the sdist honors the pytest configuration. Re-release of 13.0. Intermittent connectivity issues caused the release process to fail and PyPI uploads no longer accept files for 13.0. * Issue #356: Back out Pull Request #119 as it requires Setuptools 10 or later as the source during an upgrade. * Removed build_py class from setup.py. According to 892f439d216e, this functionality was added to support upgrades from old Distribute versions, 0.6.5 and 0.6.6. * Pull Request #119: Restore writing of ``setup_requires`` to metadata (previously added in 8.4 and removed in 9.0). * Documentation is now linked using the rst.linker package. * Fix ``setuptools.command.easy_install.extract_wininst_cfg()`` with Python 2.6 and 2.7. * Issue #354. Added documentation on building setuptools documentation. * Issue #345: Unload all modules under pkg_resources during ``ez_setup.use_setuptools()``. * Issue #336: Removed deprecation from ``ez_setup.use_setuptools``, as it is clearly still used by buildout's bootstrap. ``ez_setup`` remains deprecated for use by individual packages. * Simplified implementation of ``ez_setup.use_setuptools``. * Pull Request #118: Soften warning for non-normalized versions in Distribution. * Issue #339: Correct Attribute reference in ``cant_write_to_target``. * Issue #336: Deprecated ``ez_setup.use_setuptools``. * Issue #335: Fix script header generation on Windows. * Fixed incorrect class attribute in ``install_scripts``. Tests would be nice. * Issue #331: Fixed ``install_scripts`` command on Windows systems corrupting the header. * Restore ``setuptools.command.easy_install.sys_executable`` for pbr compatibility. For the future, tools should construct a CommandSpec explicitly. * Issue #188: Setuptools now support multiple entities in the value for ``build.executable``, such that an executable of "/usr/bin/env my-python" may be specified. This means that systems with a specified executable whose name has spaces in the path must be updated to escape or quote that value. * Deprecated ``easy_install.ScriptWriter.get_writer``, replaced by ``.best()`` with slightly different semantics (no force_windows flag). * Issue #327: Formalize and restore support for any printable character in an entry point name. * Expose ``EntryPoint.resolve`` in place of EntryPoint._load, implementing the simple, non-requiring load. Deprecated all uses of ``EntryPoint._load`` except for calling with no parameters, which is just a shortcut for ``ep.require(); ep.resolve();``. Apps currently invoking ``ep.load(require=False)`` should instead do the following if wanting to avoid the deprecating warning:: getattr(ep, "resolve", lambda: ep.load(require=False))() * Pip #2326: Report deprecation warning at stacklevel 2 for easier diagnosis. * Issue #281: Since Setuptools 6.1 (Issue #268), a ValueError would be raised in certain cases where VersionConflict was raised with two arguments, which occurred in ``pkg_resources.WorkingSet.find``. This release adds support for indicating the dependent packages while maintaining support for a VersionConflict when no dependent package context is known. New unit tests now capture the expected interface. * Interop #3: Upgrade to Packaging 15.0; updates to PEP 440 so that >1.7 does not exclude 1.7.1 but does exclude 1.7.0 and 1.7.0.post1. * Issue #323: Fix regression in entry point name parsing. * Deprecated use of EntryPoint.load(require=False). Passing a boolean to a function to select behavior is an anti-pattern. Instead use ``Entrypoint._load()``. * Substantial refactoring of all unit tests. Tests are now much leaner and re-use a lot of fixtures and contexts for better clarity of purpose. * Issue #320: Added a compatibility implementation of ``sdist._default_revctrl`` so that systems relying on that interface do not fail (namely, Ubuntu 12.04 and similar Debian releases). * Issue #319: Fixed issue installing pure distutils packages. * Issue #313: Removed built-in support for subversion. Projects wishing to retain support for subversion will need to use a third party library. The extant implementation is being ported to `setuptools_svn <https://pypi.python.org/pypi/setuptools_svn>`_. * Issue #315: Updated setuptools to hide its own loaded modules during installation of another package. This change will enable setuptools to upgrade (or downgrade) itself even when its own metadata and implementation change. * Prefer vendored packaging library `as recommended <https://github.com/jaraco/setuptools/commit/170657b68f4b92e7e1bf82f5e19a831… 44af67#commitcomment-9109448>`_. * Issue #312: Restored presence of pkg_resources API tests (doctest) to sdist. * Issue #314: Disabled support for ``setup_requires`` metadata to avoid issue where Setuptools was unable to upgrade over earlier versions. * Pull Request #106: Now write ``setup_requires`` metadata. * Issue #311: Decoupled pkg_resources from setuptools once again. ``pkg_resources`` is now a package instead of a module. * Issue #306: Suppress warnings about Version format except in select scenarios (such as installation). * Pull Request #85: Search egg-base when adding egg-info to manifest. * Upgrade ``packaging`` to 14.5, giving preference to "rc" as designator for release candidates over "c". * PEP-440 warnings are now raised as their own class, ``pkg_resources.PEP440Warning``, instead of RuntimeWarning. * Disabled warnings on empty versions. * Upgrade ``packaging`` to 14.4, fixing an error where there is a different result for if 2.0.5 is contained within >2.0dev and >2.0.dev even though normalization rules should have made them equal. * Issue #296: Add warning when a version is parsed as legacy. This warning will make it easier for developers to recognize deprecated version numbers. * Issue #296: Restored support for ``__hash__`` on parse_version results. * Issue #296: Restored support for ``__getitem__`` and sort operations on parse_version result. * Issue #296: Restore support for iteration over parse_version result, but deprecated that usage with a warning. Fixes failure with buildout. * Implement `PEP 440 <http://legacy.python.org/dev/peps/pep-0440/>`_ within pkg_resources and setuptools. This change deprecates some version numbers such that they will no longer be installable without using the ``===`` escape hatch. See `the changes to test_resources <https://bitbucket.org/pypa/setuptools/commits/dcd552da643c4448056de84c73d56… d70769d5#chg-setuptools/tests/test_resources.py>`_ for specific examples of version numbers and specifiers that are no longer supported. Setuptools now "vendors" the `packaging <https://github.com/pypa/packaging>`_ library. * Issue #80, Issue #209: Eggs that are downloaded for ``setup_requires``, ``test_requires``, etc. are now placed in a ``./.eggs`` directory instead of directly in the current directory. This choice of location means the files can be readily managed (removed, ignored). Additionally, later phases or invocations of setuptools will not detect the package as already installed and ignore it for permanent install (See #209). This change is indicated as backward-incompatible as installations that depend on the installation in the current directory will need to account for the new location. Systems that ignore ``*.egg`` will probably need to be adapted to ignore ``.eggs``. The files will need to be manually moved or will be retrieved again. Most use cases will require no attention. * Issue #268: When resolving package versions, a VersionConflict now reports which package previously required the conflicting version. * Issue #262: Fixed regression in pip install due to egg-info directories being omitted. Re-opens Issue #118. * Issue #259: Fixed regression with namespace package handling on ``single version, externally managed`` installs. * Issue #100: When building a distribution, Setuptools will no longer match default files using platform-dependent case sensitivity, but rather will only match the files if their case matches exactly. As a result, on Windows and other case-insensitive file systems, files with names such as 'readme.txt' or 'README.TXT' will be omitted from the distribution and a warning will be issued indicating that 'README.txt' was not found. Other filenames affected are: - README.rst - README - setup.cfg - setup.py (or the script name) - test/test*.py Any users producing distributions with filenames that match those above case-insensitively, but not case-sensitively, should rename those files in their repository for better portability. * Pull Request #72: When using ``single_version_externally_managed``, the exclusion list now includes Python 3.2 ``__pycache__`` entries. * Pull Request #76 and Pull Request #78: lines in top_level.txt are now ordered deterministically. * Issue #118: The egg-info directory is now no longer included in the list of outputs. * Issue #258: Setuptools now patches distutils msvc9compiler to recognize the specially-packaged compiler package for easy extension module support on Python 2.6, 2.7, and 3.2. * Issue #237: ``pkg_resources`` now uses explicit detection of Python 2 vs. Python 3, supporting environments where builtins have been patched to make Python 3 look more like Python 2. * Issue #240: Based on real-world performance measures against 5.4, zip manifests are now cached in all circumstances. The ``PKG_RESOURCES_CACHE_ZIP_MANIFESTS`` environment variable is no longer relevant. The observed "memory increase" referenced in the 5.4 release notes and detailed in Issue #154 was likely not an increase over the status quo, but rather only an increase over not storing the zip info at all. * Issue #242: Use absolute imports in svn_utils to avoid issues if the installing package adds an xml module to the path. * Issue #239: Fix typo in 5.5 such that fix did not take. * Issue #239: Setuptools now includes the setup_requires directive on Distribution objects and validates the syntax just like install_requires and tests_require directives. * Issue #236: Corrected regression in execfile implementation for Python 2.6. - Enable testsuite run during build. Added BuildRequires needed for that - Refresh setuptools-5.4.1-create-sitedir.patch - Add fix-type-error.patch: Fix error during test run - Add fix-sle11-test-failure.patch: Fix error during test run on SLE11SP3 ==== python3-setuptools ==== Version update (15.1 -> 15.2) - update to version 15.2: * Issue #373: Provisionally expose "pkg_resources._initialize_master_working_set", allowing for imperative re-initialization of the master working set. ==== qemu ==== Version update (2.2.0 -> 2.3.0) Subpackages: qemu-arm qemu-block-curl qemu-extra qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-ppc qemu-s390 qemu-seabios qemu-sgabios qemu-tools qemu-vgabios qemu-x86 - Update to v2.3.0: See http://wiki.qemu-project.org/ChangeLog/2.3 - Disable iotests for now - Update to v2.3.0-rc4: See http://wiki.qemu-project.org/ChangeLog/2.3 - Update seabios_avoid_smbios_signature_string.patch with version applied upstream - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 - Fix s390x stoc instructions 0039-s390x-Fix-stoc-direction.patch - Update to v2.3.0-rc3: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped (applied upstream): 0037-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch * Patches renamed: 0038-linux-user-Allocate-thunk-size-dyna.patch -> 0037-linux-user-Allocate-thunk-size-dyna.patch * Revert -rc3 change to disable seccomp on non-x86 architectures 0038-Revert-Revert-seccomp-tests-that-al.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 - Fix qemu-linux-user on powerpc * Patches added: 0038-linux-user-Allocate-thunk-size-dyna.patch - Split off qemu-testsuite.spec * Package check-report.html and check-report.xml * Enable quick iotests - Dropped 0030-net-Warn-about-default-MAC-address.patch The warning is relevant only for bridged setups, not for the default SLIRP based -net user / -netdev user setup, and it breaks output expectations of some iotests. * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches renamed: 0031-console-add-question-mark-escape-op.patch -> 0030-console-add-question-mark-escape-op.patch 0032-Make-char-muxer-more-robust-wrt-sma.patch -> 0031-Make-char-muxer-more-robust-wrt-sma.patch 0033-linux-user-lseek-explicitly-cast-no.patch -> 0032-linux-user-lseek-explicitly-cast-no.patch 0034-virtfs-proxy-helper-Provide-__u64-f.patch -> 0033-virtfs-proxy-helper-Provide-__u64-f.patch 0035-configure-Enable-PIE-for-ppc-and-pp.patch -> 0034-configure-Enable-PIE-for-ppc-and-pp.patch 0036-qtest-Increase-socket-timeout.patch -> 0035-qtest-Increase-socket-timeout.patch 0037-AIO-Reduce-number-of-threads-for-32.patch -> 0036-AIO-Reduce-number-of-threads-for-32.patch 0038-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch -> 0037-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch - Re-enable glusterfs on Factory (updated from v3.6.1 to v3.6.2) - Re-enable seccomp for armv7l (libseccomp submission pending) - Suppress seccomp for Factory armv7l (broken in libseccomp v2.2.0) - Disable glusterfs explicitly on Factory, SLE12 and before 13.1 - Enable glusterfs and package as qemu-block-gluster glusterfs post-v3.5.3 and v3.6.1/v3.6.2 have switched the glusterfs-api.pc version incompatibly, so only 13.1+13.2 for now - Use macro for module Conflicts - Tidy configure options: * Move --enable-modules to build options * Sort libusb alphabetically * Explicitly enable attr, bluez, fdt, lzo, tpm, vhdx, vhost-net, vnc, xen-pci-passthrough * Enable bzip2 * Enable libssh2 where possible and package as qemu-block-ssh * Enable numa where a compatible numactl is available * Enable quorum where a compatible gnutls is available * Enable snappy where possible * Prepare to enable glusterfs * Explicitly enable the nop tracing backend (to be revisited) * Explicitly disable Archipelago, as we don't have libxseg and it's incompatibly GPL-3.0+ * Explicitly disable libiscsi, libnfs, netmap and rbd as we don't have packages * Drop deprecated --enable-virtio-blk-data-plane (now default) - Fix 64-bit TCG stores on 32-bit Big Endian hosts (ppc) 0038-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 - Update to v2.3.0-rc2: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped (upstreamed): 0038-fw_cfg-test-Fix-test-path-to-includ.patch 0039-rcu-tests-fix-compilation-on-32-bit.patch - make check was failing due to a bogus SMBIOS signature being encountered within SeaBIOS. Avoid having that signature stored randomly within the SeaBIOS image. * seabios_avoid_smbios_signature_string.patch - Build x86 firmware only from 13.1 on (11.4 was broken, surpassing 128 KB) - Update to v2.3.0-rc1: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped (upstreamed): 0038-linux-user-Fix-emulation-of-splice-.patch 0039-ide-fix-cmd_write_pio-when-nsectors.patch 0040-ide-fix-cmd_read_pio-when-nsectors-.patch 0041-ahci-Fix-sglist-offset-manipulation.patch 0042-ahci-test-improve-rw-buffer-pattern.patch 0045-linux-user-fix-broken-cpu_copy.patch * Patches renamed: 0043-fw_cfg-test-Fix-test-path-to-includ.patch -> 0038-fw_cfg-test-Fix-test-path-to-includ.patch 0044-rcu-tests-fix-compilation-on-32-bit.patch -> 0039-rcu-tests-fix-compilation-on-32-bit.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches added: 0045-linux-user-fix-broken-cpu_copy.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Make test path for fw_cfg-test unique (including architecture) 0043-fw_cfg-test-Fix-test-path-to-includ.patch * Fix rcu tests build on ppc (undefined reference to `__sync_fetch_and_add_8') 0044-rcu-tests-fix-compilation-on-32-bit.patch - Fix typo in SeaBIOS size check seabios_checkrom_typo.patch - Update to v2.3.0-rc0: See http://wiki.qemu-project.org/ChangeLog/2.3 * Updated update_git.sh accordingly * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * seabios_128kb.patch: Added patch to squeeze SeaBIOS into 128 KB with our gcc 4.8.3 (brogers(a)suse.com) - Renamed 0030-Legacy-Patch-kvm-qemu-preXX-report-.patch to 0030-net-Warn-about-default-MAC-address.patch: Suppress warning for accel=qtest, to sanitize make check results. - Added patches to fix ahci-test: 0039-ide-fix-cmd_write_pio-when-nsectors.patch 0040-ide-fix-cmd_read_pio-when-nsectors-.patch 0041-ahci-Fix-sglist-offset-manipulation.patch 0042-ahci-test-improve-rw-buffer-pattern.patch ==== qemu-linux-user ==== Version update (2.2.0 -> 2.3.0) - Update to v2.3.0: See http://wiki.qemu-project.org/ChangeLog/2.3 - Update to v2.3.0-rc4: See http://wiki.qemu-project.org/ChangeLog/2.3 - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 - Fix s390x stoc instructions 0039-s390x-Fix-stoc-direction.patch - Update to v2.3.0-rc3: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped (applied upstream): 0037-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch * Patches renamed: 0038-linux-user-Allocate-thunk-size-dyna.patch -> 0037-linux-user-Allocate-thunk-size-dyna.patch * Patches added: 0038-Revert-Revert-seccomp-tests-that-al.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 - Fix qemu-linux-user on powerpc * Patches added: 0038-linux-user-Allocate-thunk-size-dyna.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped: 0030-net-Warn-about-default-MAC-address.patch * Patches renamed: 0031-console-add-question-mark-escape-op.patch -> 0030-console-add-question-mark-escape-op.patch 0032-Make-char-muxer-more-robust-wrt-sma.patch -> 0031-Make-char-muxer-more-robust-wrt-sma.patch 0033-linux-user-lseek-explicitly-cast-no.patch -> 0032-linux-user-lseek-explicitly-cast-no.patch 0034-virtfs-proxy-helper-Provide-__u64-f.patch -> 0033-virtfs-proxy-helper-Provide-__u64-f.patch 0035-configure-Enable-PIE-for-ppc-and-pp.patch -> 0034-configure-Enable-PIE-for-ppc-and-pp.patch 0036-qtest-Increase-socket-timeout.patch -> 0035-qtest-Increase-socket-timeout.patch 0037-AIO-Reduce-number-of-threads-for-32.patch -> 0036-AIO-Reduce-number-of-threads-for-32.patch 0038-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch -> 0037-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch - Fix 64-bit TCG stores on 32-bit Big Endian hosts (ppc) 0038-tcg-tcg-op.c-Fix-ld-st-of-64-bit-va.patch * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 - Update to v2.3.0-rc2: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped: 0038-fw_cfg-test-Fix-test-path-to-includ.patch 0039-rcu-tests-fix-compilation-on-32-bit.patch - Update to v2.3.0-rc1: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped (upstreamed): 0038-linux-user-Fix-emulation-of-splice-.patch 0039-ide-fix-cmd_write_pio-when-nsectors.patch 0040-ide-fix-cmd_read_pio-when-nsectors-.patch 0041-ahci-Fix-sglist-offset-manipulation.patch 0042-ahci-test-improve-rw-buffer-pattern.patch 0045-linux-user-fix-broken-cpu_copy.patch * Patches renamed: 0043-fw_cfg-test-Fix-test-path-to-includ.patch -> 0038-fw_cfg-test-Fix-test-path-to-includ.patch 0044-rcu-tests-fix-compilation-on-32-bit.patch -> 0039-rcu-tests-fix-compilation-on-32-bit.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 - Fix cpu_copy() not actually copying the CPU state 0045-linux-user-fix-broken-cpu_copy.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped: 0044-rcutorture-fix-compilation-on-32-bi.patch * Patches added: 0044-rcu-tests-fix-compilation-on-32-bit.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches added: 0043-fw_cfg-test-Fix-test-path-to-includ.patch 0044-rcutorture-fix-compilation-on-32-bi.patch - Update to v2.3.0-rc0: See http://wiki.qemu-project.org/ChangeLog/2.3 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.3 * Patches dropped: 0030-Legacy-Patch-kvm-qemu-preXX-report-.patch * Patches added: 0030-net-Warn-about-default-MAC-address.patch 0039-ide-fix-cmd_write_pio-when-nsectors.patch 0040-ide-fix-cmd_read_pio-when-nsectors-.patch 0041-ahci-Fix-sglist-offset-manipulation.patch 0042-ahci-test-improve-rw-buffer-pattern.patch ==== libraptor-devel ==== Subpackages: libraptor2-0 raptor - Add gpg signature - Update dependencies ==== setxkbmap ==== Version update (1.3.0 -> 1.3.1) - Update to version 1.3.1: * Move global rules variable into applyRules, the only function that uses it * Make len a size_t instead of converting back & forth to an int * Use C99 struct initializer for cmdNames in applyComponentNames * config: Add missing AC_CONFIG_SRCDIR * configure: Drop AM_MAINTAINER_MODE * autogen.sh: Honor NOCONFIGURE=1 * Printing the program's version number on -version. * Fixing a small mistake in the man page -- s/comp/map/. * Ensure consistency between the manpage and the output of the -h option ==== squid ==== Version update (3.4.11 -> 3.5.3) - Fix update from 3.4 to 3.5 - Fix SLE 11 build with older kerberos libraries * squid-old-kerberos.patch - Update to 3.5.3 * Regression Bug 4213: negotiate_kerberos_auth: freeing non-dynamic memory * Regression Bug 4206: Incorrect connection close on expect:100-continue * Bug 4204: ./configure does not abort when required helpers cannot be built * Bug 3805: support shared memory on MacOS X in Mem::IPC::Segment * Bug 2907: high CPU usage on CONNECT when using delay pools * basic_getpwnam_auth: fail authentication on crypt() failures * basic_nis_auth: fail authentication on crypt() failures * ext_kerberos_ldap_group_acl: Heimdal support improvements * ext_wbinfo_group_acl: Perl 5.20 support * ... and several compile issues - Use xz compressed source - Update to 3.5.2 * Regression Bug 4176: Digest auth too many helper lookups * Regression Bug 4180: not-fully-initialized data member in ACLUserData * Bug 4172: Solaris broken krb5-config * Bug 4073: Cygwin compile errors * Bug 3919: remove several never-true / never-false comparisons * HTTPS: Add missing root CAs when validating chains that passed internal checks * Fix some cbdataFree related memory leaks * Quieten CBDATA 'leak' messages * Set SNI information in transparent bumping mode * negotiate_kerberos_auth: fix krb5.conf backward compatibility * Fix memory leaks in cachemgr.cgi URL parser * Fix sslproxy_options in peek-and-splice mode * ... and fix several portability and build issues * ... and some documentation updates * ... and all fixes from squid 3.4.11 - Update to 3.5.1 (13 Jan 2015): * Fix handling of invalid SSL server certificates when splicing connections * basic_smb_lm_auth: Simplified MSNT basic auth helper * squidclient: Fix -A and -P options * ... and several portability fixes * ... and all fixes from squid 3.4.11 * ... and a lot of documentation updates - removed obsolete patch * squid-compiled_without_RPM_OPT_FLAGS.patch - rebased patches * squid-config.patch * squid-nobuilddates.patch * squid-brokenad.patch - replace configure option * --enable-ssl > --with-openssl ==== libgudev-1_0-0 ==== Subpackages: libgudev-1_0-devel libudev-devel libudev1 libudev1-32bit systemd systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit typelib-1_0-GUdev-1_0 udev - Add upstream patch 0001-core-don-t-change-removed-devices-to-state-tentative.patch to fix the fix of the last backport (bsc#921898) ==== tcpdump ==== Version update (4.7.3 -> 4.7.4) - tcpdump 4.7.4: * PPKI to Router Protocol: Fix Segmentation Faults and other problems * RPKI to Router Protocol: print strings with fn_printn() * wb: fix some bounds checks (previously patched in, removed CVE-2015-3138.patch) ==== tigervnc ==== Subpackages: xorg-x11-Xvnc - u_syslog.patch, vnc.xinetd * Add logging to syslog. ==== timezone ==== Version update (2015b -> 2015c) - Revert initrd generation updates, they add a new build cycle. - timezone update 2015c [boo#927029] * correct Egypt 2015 DST transition from April 24 to April 30 * Changes affecting past time stamps and historic DST changes * time zones turned into links where this affects UTC offsets in pre-1970 time stamps only: America/Montreal - BuildRequire suse-module-tools otherwise initrd macros are never defined. - we should regenerate the initrd when the timezone package is updated, as the timezone selected by the user plus UTC is nowadays required by SUSE-specific "warpclock" dracut module. ==== timezone-java ==== Version update (2015b -> 2015c) - Revert initrd generation updates, they add a new build cycle. - timezone update 2015c [boo#927029] * correct Egypt 2015 DST transition from April 24 to April 30 * Changes affecting past time stamps and historic DST changes * time zones turned into links where this affects UTC offsets in pre-1970 time stamps only: America/Montreal - BuildRequire suse-module-tools otherwise initrd macros are never defined. - we should regenerate the initrd when the timezone package is updated, as the timezone selected by the user plus UTC is nowadays required by SUSE-specific "warpclock" dracut module. ==== usb_modeswitch ==== Subpackages: usb_modeswitch-data - use pkgconfig to detect udev install directory to avoid problems during bootstrap ==== valgrind ==== Subpackages: valgrind-devel - Add valgrind-linux-4.0.patch: Fix build with linux kernel 4.0+. Taken from svn, rev 14955. ==== virt-install ==== Subpackages: virt-manager virt-manager-common - Remove bad dependency on gtk-vnc2. It is provided by the Gtk2 version of GtkVnc, the Gtk3 version provides gtk-vnc. The right dependency is picked up by the autorequires. ==== libwicked-0-6 ==== Version update (0.6.17 -> 0.6.18) Subpackages: wicked wicked-service - version 0.6.18 - initial pre/post-up/down script and systemd service start support (bsc#920070,boo#907215) - fixed lease address owner and lifetime tracking to update address lifetimes on dhcp6 renewal, correctly drop (requesting/deferred) leases in wickedd not (yet) existing as lease in dhcp supplicants and avoid address exists error messages (bsc#920889,bsc#907694) - add missed wpa_supplicant's wireless mode names (bsc#927616) - schema: require macvlan lower device same as vlan (bsc#927065) - fixes to use only ready devices by name to avoid dependency confusion mapping config to wrong device, event races and wrong use of the link-up instead of the wireless link-associated event (bsc#918662,bsc#921218). ==== wine ==== Version update (1.7.41 -> 1.7.42) Subpackages: wine-32bit - Updated to 1.7.42 development snapshot - Support for dynamic timezone information. - Initial desktop shell window support. - Some more Direct2D support. - Various bug fixes. - updated winetricks ==== wireshark ==== Subpackages: wireshark-ui-gtk - Build the qt frontend against QT5 in Factory (only). ==== wpa_supplicant ==== Subpackages: wpa_supplicant-gui - 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch Fix CVE-2015-1863, memcpy overflow. - wpa_supplicant-alloc_size.patch: annotate two wrappers with attribute alloc_size, which may help warning us of bugs such as the above. ==== xdpyinfo ==== Version update (1.3.1 -> 1.3.2) - Update to version 1.3.2: * Print which option was in error along with usage message * Sprinkle consts in StrCmp to quiet cast warnings * config: Add missing AC_CONFIG_SRCDIR * configure: Drop AM_MAINTAINER_MODE * autogen.sh: Honor NOCONFIGURE=1 * Mark required arguments to Xlib error handler as unused * Delete unused NULLSTR macro ==== xf86-input-void ==== Version update (1.4.0 -> 1.4.1) - Release 1.4.1: * A few cleanup patches that have been sitting on the branch for almost a year. ==== xhost ==== Version update (1.0.6 -> 1.0.7) - Update to version 1.0.7: * Add AC_USE_SYSTEM_EXTENSIONS to expose non-standard extensions * configure: Drop AM_MAINTAINER_MODE * autogen.sh: Honor NOCONFIGURE=1 ==== xmodmap ==== Version update (1.0.8 -> 1.0.9) - Update to version 1.0.9: * configure: Drop AM_MAINTAINER_MODE * autogen.sh: Honor NOCONFIGURE=1 * Add -version option to print program version * Print which option was in error along with usage message * Avoid null pointer use if malloc() fails * Remove unneeded casts on malloc, realloc, and free calls ==== xorg-x11-server ==== Subpackages: xorg-x11-server-extra xorg-x11-server-sdk - Add xorg-x11-server-byte-order.patch to correctly set X_BYTE_ORDER when compiling tigervnc on ppc64 architecture. Related to bnc#926201 ==== yast2-installation ==== Version update (3.1.140 -> 3.1.141) - Fixed an error preventing the VNC connection during second installation stage of AutoYaST when using VNC=1 (bnc#923901) - 3.1.141 ==== yast2-packager ==== Version update (3.1.66 -> 3.1.67) - register addons from media (FATE#318505) - 3.1.67 ==== yast2-proxy ==== Version update (3.1.3 -> 3.1.4) - Write also --noproxy to .curlrc otherwise it is ignored even if set in the environment (bsc#923788). - 3.1.4 ==== yast2-trans-af ==== Subpackages: yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-en_US yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Updated languages: af am ar be bg bn bs ca cs cy da de el eo es et eu fa fi fr gl gu he hi hr hu id it ja jv ka km kn ko ku lo lt mk mr ms my nb nl nn pa pl pt ro ru si sk sl sr sv sw ta tg th tk tr uk vi wa xh zu en_GB en_US pt_BR zh_CN zh_TW ast nds. ==== ypbind ==== Version update (2.0 -> 2.2) - Update to ypbind-2.2 - fix handling of not reacheable NIS server - check that the port of the NIS server hasn't changed - Update to ypbind-2.1 - remove references to obsolete dbus feature - use shorter timeouts Removed packages: libgtk-vnc-1_0-0 vmware-guest-kmp-default > vmware-guest-kmp-desktop Added packages: aqbanking > aqbanking-devel > aqbanking-lang libFOX-1_6-0 gnucash > gnucash-lang guile1 > libguile-srfi-srfi-1-v-3-3 > libguile-srfi-srfi-13-14-v-3-3 > libguile-srfi-srfi-4-v-3-3 > libguile-srfi-srfi-60-v-2-2 > libguile17 > libguilereadline-v-17-17 gwenhywfar > gwenhywfar-devel > gwenhywfar-lang > libgwengui-cpp0 > libgwengui-fox16-0 > libgwengui-gtk2-0 > libgwengui-qt4-0 > libgwenhywfar60 > libgwenhywfar60-plugins libdbi3 libuv-devel > libuv1 perl-Finance-Quote perl-HTML-Element-Extended perl-HTML-TableExtract slib -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 15

[opensuse-factory] apache -- align binary names to upstream ones
by Petr Gajdos 28 May '15

28 May '15

Hello list, I think the best resolution of bug 873674[0] would be to deprecate/remove binary names like apache2ctl, split-logfile2 and even logresolve.pl2. Please find proposal in sr#308904[1] and file list diff in the attachement. Note that for deprecated names we provide compat symlinks there, but not for all of removed names. If you think there should be more compat symlinks, please let me know. Thanks! Petr [0] https://bugzilla.suse.com/show_bug.cgi?id=873674 [1] https://build.opensuse.org/request/show/308904

3 6

[opensuse-factory] New Tumbleweed snapshot 20150526 released!
by Ludwig Nussel 28 May '15

28 May '15

Changed packages: ==== ctags ==== - Fix endless loop in javascript parser (bnc#899486, CVE-2014-7204) - Added CVE-2014-7204.patch ==== exo-lang ==== Version update (0.10.4 -> 0.10.6) Subpackages: exo-tools libexo-1-0 - update to version 0.10.6 - Close fd with error state goto (CID 30797), extension of previous fix "File descriptor was never opened if < 0 (CID #85387)" - update to version 0.10.5 - Added --disable-debug to distcheck rules, this will allow building with autogen.sh --disable-debug on newer systems (bxo#11556) - Do not use x-scheme-handler/file mimetype (bxo#7257) - Escape URIs for exo-open (bxo#9912) - File descriptor was never opened if < 0 (CID #85387) - Reverted patches that broke window focus on startup (bxo#11743) - Fix StartupNotify (bxo#9570) - Fix implicit declaration of function 'xfce_spawn_on_screen' (bxo#11655) - Translation updates ==== gawk ==== Version update (4.1.2 -> 4.1.3) - GNU awk 4.1.3: * Regexp parsing with extra brackets should now be working again. * Updated to latest config.guess and config.sub. * bug fixes ==== yast2 ==== Version update (3.1.124 -> 3.1.125) Subpackages: yast2-devel-doc - Fixed proposal to open fallback ports for services (bsc#916376) - Removed opening iSCSI ports from firewall proposal (bsc#916376) - 3.1.125 Removed packages: Added packages: -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 5

[opensuse-factory] KDE5: display problem after upgrade
by Markus Schauler 27 May '15

27 May '15

Hi, I did a "zypper dup" to upgrade to the latest snapshot. Zypper did update these packages, which look harmless: akonadi akregator bundle-lang-gnome-de bundle-lang-gnome-en dolphin gawk gstreamer-plugins-qt kaddressbook kdebase4-libkonq kdebase4-nsplugin kdepasswd kdepim4 kdialog keditbookmarks kmail knotes konqueror konqueror-plugins kontact korganizer libavcodec56 libavformat56 libavutil54 libdca0 libjack0 libkdepim4 libkonq5 libmad0 libmpeg2-0 libpackagekit-glib2-18 libpostproc53 libsqlite3-0 libswresample1 libswscale3 libyui-ncurses-pkg6 libyui-qt-pkg6 libzypp openSUSE-release openSUSE-release-ftp PackageKit PackageKit-backend-zypp PackageKit-browser-plugin PackageKit-gstreamer-plugin PackageKit-gtk3-module phonon4qt5-backend-gstreamer plasmoid-folderview python3-setuptools python-pycurl sqlite3 sqlite3-devel typelib-1_0-PackageKitGlib-1_0 virtualbox-guest-tools virtualbox-guest-x11 yast2 yast2-pkg-bindings zypper zypper-aptitude zypper-log However, after the update, I had massive display problems with KDE5: when firefox was open and the firefox window was covered by another window (konsole), screen started to flicker and moving the windows around was "jumpy". I resolved the problem by rolling back to the "pre-zypper" snapshot. Thanks, snapper! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Plasma5: constant plasmashell hangs or crashes (boo#931172)
by Lars Müller 27 May '15

27 May '15

Hi, I'm running 20150525 Tumbleweed x86_64 and see constant crashes of plasmashell since I moved to KDE 5. The system in question got initially installed as openSUSE 13.1, upgraded to 13.2. Since half a year the main Tumbleweed (debug, non-oss, oss) and some some additional repositories (all non gui and in particular non KDE) are configured. I'll update the system by calling zypper up and am faced since KDE 5 got push out to the Tumbleweed users by https://bugzilla.opensuse.org/show_bug.cgi?id=931172 The defect report has a backtrace attached. I suspect there is something remaining from KDE 4 installed and might interfere somehow. Any hints or suggestions how to push this issue forward are welcome. Cheers, Lars -- Lars Müller [ˈlaː(r)z ˈmʏlɐ] Samba Team + SUSE Labs SUSE Linux, Maxfeldstraße 5, 90409 Nürnberg, Germany

2 1