November 2015 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] New Tumbleweed snapshot 20151106 ** nvidia install fails
by Patrick Shanahan 12 Nov '15

12 Nov '15

* Ludwig Nussel <ludwig.nussel(a)suse.de> [11-07-15 09:29]: > Changed packages: [...] > ==== kernel-default ==== > Version update (4.2.4 -> 4.3.0) > Subpackages: kernel-default-devel > > - rpm/kernel-binary.spec.in: sync with master > - commit 7b374a4 > - Update to 4.3-final. > - 1 patch eliminated. > - commit e20b856 > - rpm/kernel-binary.spec.in: really pass down %{?_smp_mflags} > - commit 273a7fb > - ALSA: hda - Disable 64bit address for Creative HDA controllers > (bnc#814440). > - commit 1b5a73d > - Linux 4.2.5. > - commit 27d2719 > - rpm/kernel-binary.spec.in: Use parallel make in all invocations > Also, remove the lengthy comment, since we are using a standard rpm > macro now. > - commit 4d6ba88 > - rpm/kernel-binary.spec.in: Delete one more DEBUG_SECTION_MISMATCH assignment > - commit fce45dc > - rpm/kernel-binary.spec.in: Do not explicitly set DEBUG_SECTION_MISMATCH > CONFIG_DEBUG_SECTION_MISMATCH is a selectable Kconfig option since > 2.6.39 and is enabled in our configs. > - commit 15aa4f8 Cannot install NVIDIA-Linux-x86_64-355.11.run with new kernel 4.3.0, had to revert to 4.2.4. Unfortunately I did not save the installer.log before reverting kernel. I see there is a new issue : NVIDIA-Linux-x86_64-358.09.run I will try it and will save installer logs this time. tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] Problem with osc
by Larry Finger 12 Nov '15

12 Nov '15

As many of you know, since a recent update of gdm, installing Tumbleweed in a VirtualBox VM results in a system that will not start. The same problem happened with Leap 42.1-RC1, and the workaround is the same as described in the "Most Annoying Bugs" page. Oracle has just released VirtualBox version 5.0.10, which is supposed to have a partial fix for this problem and I am trying to test the new code. My problem is that an osc build uses the 4.2.4 kernel while the TW 1106 snapshot comes with kernel 4.3.0, thus my newly created packages will not install. How do I force osc to use the newer kernel? Thanks, Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] apache restart in correct time
by Petr Gajdos 12 Nov '15

12 Nov '15

Hello! I am now working on resolution of bug 893659. You can read the details there and proposal in comment 5 complemented by comment 7. In short, during package update, restart happens in apache2 %postun, which means before upgrade of apache2-MPM package if apache2-MPM is upgraded after apache2. Restarting of instances doesn't work at all so far. The proposal summary is: For each package that wants restart apache during this package's update (apache2, apache2-MPM and module packages) 1. in %postun, set an appropriate flag, 2. in %posttrans, restart if the flag is set and remove the flag. This should ensure that apache is restarted at the end rpm/zypper transaction and each instance at most once. For module package, only these instances will be restared, which have the given module loaded (mentioned in appropriate sysconfig file). Packages Apache/apache2 and Apache:Modules/apache2-mod_{bmx,bw} are ready for testing, involved macros are in Apache/apache-rpm-macros-control. Petr -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Remove dvgrab from openSUSE
by Dave Plater 12 Nov '15

12 Nov '15

Hi, I've just noticed a delete request for multimedia:apps dvgrab. The comment stated that it's dropped from Factory. I've been out in the wild for a few years and haven't been able to read list mail so I've no idea why it was dropped. I have been actively maintaining multimedia and a few other packages in that time and still receiving notification mail. I've noticed submit requests for dvgrab at times so there must be some interest. The deleter should have sent a list notification but I can't find one. Regards Dave Plater -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Can anyone tell me the story with iPython?
by Greg Freemyer 12 Nov '15

12 Nov '15

All, I have a package that "requires iPython". I believe iPython was in factory 6 months ago (or maybe not?). Today, I don't see it. (It is in Leap and 13.2) https://build.opensuse.org/package/show/openSUSE:13.2/IPython https://build.opensuse.org/package/show?project=openSUSE%3ALeap%3A42.1&pack… Can someone tell me if there is a replacement for that functionality in factory? Thanks Greg -- Greg Freemyer www.IntelligentAvatar.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] New Tumbleweed snapshot 20151110 released!
by Ludwig Nussel 11 Nov '15

11 Nov '15

Changed packages: ==== GraphicsMagick-devel ==== Version update (1.3.22 -> 1.3.23) Subpackages: libGraphicsMagick-Q16-3 libGraphicsMagick3-config libGraphicsMagickWand-Q16-2 - Update to version 1.3.23 * See included NEWS.txt for details ==== MozillaFirefox ==== Version update (41.0.2 -> 42.0) Subpackages: MozillaFirefox-translations-common - update to Firefox 42.0 (bnc#952810) * Private Browsing with Tracking Protection blocks certain Web elements that could be used to record your behavior across sites * Control Center that contains site security and privacy controls * Login Manager improvements * WebRTC improvements * Indicator added to tabs that play audio with one-click muting * Media Source Extension for HTML5 video available for all sites security fixes: * MFSA 2015-116/CVE-2015-4513/CVE-2015-4514 Miscellaneous memory safety hazards * MFSA 2015-117/CVE-2015-4515 (bmo#1046421) Information disclosure through NTLM authentication * MFSA 2015-118/CVE-2015-4518 (bmo#1182778, bmo#1136692) CSP bypass due to permissive Reader mode whitelist * MFSA 2015-119/CVE-2015-7185 (bmo#1149000) (Android only) Firefox for Android addressbar can be removed after fullscreen mode * MFSA 2015-120/CVE-2015-7186 (bmo#1193027) (Android only) Reading sensitive profile files through local HTML file on Android * MFSA 2015-121/CVE-2015-7187 (bmo#1195735) disabling scripts in Add-on SDK panels has no effect * MFSA 2015-122/CVE-2015-7188 (bmo#1199430) Trailing whitespace in IP address hostnames can bypass same-origin policy * MFSA 2015-123/CVE-2015-7189 (bmo#1205900) Buffer overflow during image interactions in canvas * MFSA 2015-124/CVE-2015-7190 (bmo#1208520) (Android only) Android intents can be used on Firefox for Android to open privileged files * MFSA 2015-125/CVE-2015-7191 (bmo#1208956) (Android only) XSS attack through intents on Firefox for Android * MFSA 2015-126/CVE-2015-7192 (bmo#1210023) (OS X only) Crash when accessing HTML tables with accessibility tools on OS X * MFSA 2015-127/CVE-2015-7193 (bmo#1210302) CORS preflight is bypassed when non-standard Content-Type headers are received * MFSA 2015-128/CVE-2015-7194 (bmo#1211262) Memory corruption in libjar through zip files * MFSA 2015-129/CVE-2015-7195 (bmo#1211871) Certain escaped characters in host of Location-header are being treated as non-escaped * MFSA 2015-130/CVE-2015-7196 (bmo#1140616) JavaScript garbage collection crash with Java applet * MFSA 2015-131/CVE-2015-7198/CVE-2015-7199/CVE-2015-7200 (bmo#1188010, bmo#1204061, bmo#1204155) Vulnerabilities found through code inspection * MFSA 2015-132/CVE-2015-7197 (bmo#1204269) Mixed content WebSocket policy bypass through workers * MFSA 2015-133/CVE-2015-7181/CVE-2015-7182/CVE-2015-7183 (bmo#1202868, bmo#1205157) NSS and NSPR memory corruption issues (fixed in mozilla-nspr and mozilla-nss packages) - requires NSPR >= 4.10.10 and NSS >= 3.19.4 - removed obsolete patches * mozilla-arm-disable-edsp.patch * mozilla-icu-strncat.patch * mozilla-skia-be-le.patch * toolkit-download-folder.patch - fixed build with enable-libproxy (bmo#1220399) * mozilla-libproxy.patch ==== anjuta ==== Version update (3.18.0 -> 3.18.2) Subpackages: anjuta-lang libanjuta-3-0 - Update to version 3.18.2: + bgo#756426: Anjuta shows "The file ... has been deleted on the disk" everytime upon file save. + Updated translations. - Drop anjuta-file-deleted-upon-save.patch: incorporated upstream. - Add anjuta-file-deleted-upon-save.patch to prevent showing "The file ... has been deleted on the disk" everytime upon file save (bgo#756426); patch taken from upstream master. ==== apache2 ==== Subpackages: apache2-devel apache2-doc apache2-example-pages apache2-prefork apache2-utils - 2.4.17-protocols.patch from upstream http2 module: * master conn_rec* addition to conn_rec * improved ALPN and Upgrade handling * allowing requests for servers whose TLS configuration is compatible to the SNI server ones * disabling TLS renegotiation for slave connections - LogLevel directive into correct config file, thanks Michael Calmer for the fix [bsc#953329] ==== btrfsprogs ==== Subpackages: libbtrfs0 - build btrfsprogs-static package for 13.2 and Factory, package with static versions of the utilities, aimed for rescue environments - update to 4.2.3 - subvol sync: make it actually work again - scanning: do not scan already discovered filesystems (minor optimization) - convert: better error message in case the filesystem is not finalized - restore: off-by-one symlink path check fix - update to 4.2.2 - fi label: use fallback if the label ioctl is not available - convert: check nodesize constraints against commandline features (-O) - scrub: report status 'running' until all devices are finished - device scanning might crash in some scenarios - fi usage: print summary for non-root users - update to 4.2.1 - fix an off-by-one error in cross-stripe boundary check - convert: don't write uninitialized data to image - image: don't loop with option -t0 - image: don't create threads if compression is not requested - Removed patches: * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch - make mkfs work with 64k nodesize again, notably fixes mkfs on ppc64 (bsc#945229) - Added patch: * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch - version 4.2 * enhancements: * mkfs: do not create extra single chunks on multiple devices * resize: try to guess the minimal size, 'inspect min-dev-size' * qgroup assign: add option to schedule rescan * chunk-recover: be more verbose about the scanning process * fixes: * check: * find stripes crossing stripe boundary -- created by convert * print correct range for file hole when there are no extents and learn how to fix it * replace: more sanity checks * convert: concurrency fixes related to reporting progress * find-root: option -a will not skip the current root anymore * subvol list: fix occasional crash * do not create stripes crossing stripe boundary * build: * fixes for musl libc * preliminary support for android (not working yet, more code changes needed) * new EXTRA_CFLAGS and EXTRA_LDFLAGS * other: * lots of cleanups * tests: lots of updates, new tests, framework improvements * documentation updates * debugging: print-tree shows stripe length - Removed patches (upstreamed): * 2104-get-min-size-for-resize.patch * 2105-move-min-resize-implementation-to-inspec.patch * 2106-inspect-add-command-min-dev-size.patch - add warning before full balance starts (bsc#940467, fate#319317) - Added patches: 2000-btrfs-full-balance-warning.diff - Add feature to get minimum size a filesystem can be resized to (FATE#317897). - Added patches: * 2104-get-min-size-for-resize.patch * 2105-move-min-resize-implementation-to-inspec.patch * 2106-inspect-add-command-min-dev-size.patch - version 4.1.2 - mkfs: bugfix, previous version does not create entierly correct filesystem (has to be recreated) - version 4.1.1 * bugfixes - defrag: threshold overflow fix - fsck: - check if items fit into the leaf space - fix wrong nbytes - mkfs: - create only desired block groups for single device - preparatory work for fix on multiple devices * enhancements - new alias for 'device delete': 'device remove' * other - fix compilation on old gcc (4.3) - documentation updates - debug-tree: print nbytes - test: image for corrupted nbytes - corupt-block: let it kill nbytes - spec: drop libacl dependency - version 4.1 * bugfixes - fsck.btrfs: no bash-isms - bugzilla 97171: invalid memory access (with tests) - receive: - cloning works with --chroot - capabilities not lost - mkfs: do not try to register bare file images - option --help accepted by the standalone utilities * enhancements - corrupt block: ability to remove csums - mkfs: - warn if metadata redundancy is lower than for data - options to make the output quiet (only errors) - mixed case names of raid profiles accepted - rework the output: - more comprehensive, 'key: value' format - subvol: - show: - print received uuid - update the output - new options to specify size units - sync: - grab all deleted ids and print them as they're removed, previous implementation only checked if there are any to be deleted - change in command semantics - scrub: print timestamps in days HMS format - receive: - can specify mount point, do not rely on /proc - can work inside subvolumes - send: - new option to send stream without data (NO_FILE_DATA) - convert: - specify incompat features on the new fs - qgroup: - show: distinguish no limits and 0 limit value - limit: ability to clear the limit - help for 'btrfs' is shorter, 1st level command overview - debug tree: print key names according to their C name * new - rescure zero-log - btrfsune: - rewrite uuid on a filesystem image - new option to turn on NO_HOLES incompat feature * deprecated - standalone btrfs-zero-log * other - testing framework updates - uuid rewrite test - btrfstune feature setting test - zero-log tests - more testing image formats - manual page updates - ioctl.h synced with current kernel uapi version - convert: preparatory works for more filesystems (reiserfs pending) - use static buffers for path handling where possible - add new helpers for send uilts that check memory allocations, switch all users, deprecate old helpers - Makefile: fix build dependency generation - map-logical: make it work again - Install bash completion for btrfs. - version 4.0 * resize: * don't accept file as an argument (it's confusing) * print better error message in case of an error * restore: optionally restore metadata (time, mode, uid/gid) * receive: optionally enforce chroot * new rescue subcommand 'zero-log', same as btrfs-zero-log, but now also part of the main utility * check: * free space checks match kernel, fixes incorrect reports * convert: fix setting of checksum bit if --no-datasum is used * fsck.btrfs: don't print messages * fix quota rescan on PPC64 (mangled ioctl number) * test updates * documentation: files renamed to .asciidoc, misc fixups - version 3.19.1 - convert: - new option to specify metadata block size - --no-progress actually works - restore: properly handle the page boundary corner case - build fixes: - missing macro from public header, BTRFS_BUILD_VERSION - wrong handling of --enable-convert - fi usage: reports correct space for degraded mounts - other: - mkfs: help string updates - completion: added 'usage' subcommands - cleanups in qgroup code, preparatory work - version 3.19 - btrfs-image - restore can now run in parallel threads - fixed restore of multiple image from multiple devices onto a single dev - introduced metadump v2 - check - make --init-csum-tree and --init-extent-tree work together - find-new - option to search through all metadata even if a root was already found - convert - show progress by default, can be turned off - corrupt-block - option to work on a specific root - bash completion script for all subcommands - spec: convert to autotools Removed patch 0169-btrfs-progs-Check-metadata-mirrors-in-find-root.patch - add COPYING - version 3.18.2 * qgroup show: print human readable sizes, options to say otherwise * check: new option to explicitly say no to writes * mkfs: message about trimming is not printed to stderr * fi show: fixed return value * tests: new infrastructure * btrfstune: force flag can be used together with seeding option * backtrace support is back * getopt cleanups * doc and help updates - version 3.18.1 - minor fixes - documentation updates - version 3.18 - mkfs - skinny-metadata feature is now on by default, first introduced in kernel 3.10 - filesystem usage - give an overview of fs usage in a way that's more comprehensible than existing 'fi df' - device usage - more detailed information about per-device allocations - check: - option to set a different tree root byte number - ability to link lost files to lost+found, caused by a recent kernel bug - repair of severely corrupted fs (use with care) - convert - option to show progress - subvol create - print the commit mode inline, print the global mode only if --verbose - other updates: musl-libc support, coverity bugfixes, new test images, documentation - Removed patches (upstreamed): * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - version 3.17.3 - convert: fix conversion of sparse ext* filesystems - show: resolve to the correct path - fsck: more verbose error for root dir problems - version 3.17.2 - check improvements - add ability to replace missing dir item/dir indexes - fix missing inode items - create missing root dirid - corrupt block: enhancements for testing fsck - zero-log: able to reset a fs with bogus log tree pointer (bko#72151) - package mkinitrd scripts conditionally (bsc#893577) - spec: minor updates - version 3.17.1 - fi df: argument handling - fix linking with libbtrfs - replace: better error reporting - fi show: fixed stall if run concurrently with balance - check: fixed argument parsing for --subvol-extents - fi df: SI prefixes corrected - Added patches: * fix-doc-build-on-SLE11SP3.diff - Removed patches: * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch - version 3.17 - check: --init-csum-tree acutally does something useful, rebuilds the whole csum tree - /dev scanning for btrfs devices is gone - /proc/partitions scanning is gone, blkid is used exclusively - new subcommand subvolume sync - filesystem df: new options to set unit format - convert: allow to copy label from the origin, or specify a new one - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - Added patches: * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Removed patches: * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0023-btrfs-progs-print-B-for-bytes.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch - version 3.16.2 - fsck: handle bad extent mapping - image: make it work on a balanced fs - btrfs-show-super: print flags in human readable way - documentation updates - version 3.16.1 - library version defines - subvol list: -R to print received UUID - fixed detection of multiple mounts on the same directory - restore: misc fixes - other fixes - Modified patches (sync with pending upstream versions): * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch - Removed patch: library-version-defines.patch (upstream) - send-stream API users updatd, drop the workaround - Removed patch: send-stream-api-wokaround.patch - workaround for send api breakage - Added patch: send-stream-api-wokaround.patch - add api versioning and package version.h (now 0.1.1) - Added patches: * library-version-defines.patch - version 3.16 - show-super: skip unrecognized sb, add option to force - debug-tree: print tree by id - mkfs: new option to specify UUID - receive: new option to limit number of errors - check: new option to verify quotas - check: reduced memory requirements - check: new option to print extent sharing - restore: check length before decompression - restore: more error handling - balance: new filter 'limit' - recover: allow to read all sb copies - restore: option to loop during restoring - mkfs: drop experimental notice - btrfstune: new option to force dangerous changes - documentation updates - Deleted patches (upstream): * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch * btrfs-progs-canonicalize-pathnames-for-device-commands - Refreshed patches: * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch - refresh references on the following patches: * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch - btrfs-progs: ignore orphaned qgroups by default - Added patch: * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch - btrfs-progs: show extent state for a subvolume (bnc#865621) - Added patch: * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch - btrfs-progs: canonicalize pathnames for device commands (bnc#880486). - Added patch: * btrfs-progs-canonicalize-pathnames-for-device-commands - fsck: fix checking on filesystems with large sectorsize (bnc#872286) - Added patches: * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch - Do not package btrfs-find-root and btrfs-select-super by default. - Removed printing byte number for every slot (bnc#872364). - Removed patch: * 0170-btrfs-progs-In-find-root-dump-bytenr-for-every-slot.patch - update to upstream 3.14.2 - man: separate pages for all subcommands - minor bugfixes - spec: removed upstreamed patches, update build dependencies - Added patches: * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch - Removed patches: * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch - add quota group verify patches, sent to list near end of the week starting 5/4/2014 - updates btrfsck with the ability to verify quota groups - Update the changelog with some sad version of diffstat output to meet requirements. - Added patches: * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch - add quota group verify patches, sent to list near end of the week starting 5/4/2014 - updates btrfsck with the ability to verify quota groups - update to upstream 3.14.1 - mkfs: - fix TRIM detection - do not zero-out end of device unconditionally - no crash with --features option - fsck: - clear log tree in repair mode - check reloc roots - btrfs - reworked space reporting (bnc#873106) - btrfs fi usage - new command - btrfs dev usage - new command - btrfs fi df - enhanced output with GlobalReserve - Removed patches: * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch - Added patches: * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0023-btrfs-progs-print-B-for-bytes.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - own mkinitrd directories - add missing symbol to library (bnc#873164) - add version dependency for devel package - Added patches: * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch - fsck: fixes and enahancements to --init-extent-tree mode - fsck: chunk-recover updates - scrub: add force option -f - send: check if subvolumes are read-only - subvol snapshot: add options to affect commit behaviour - btrfs: add properties command group - restore: add dry-run option - restore: fix restoring of compressed files - mkfs: support for no-holes feature - mkfs: option -r deals with hardlinks and relative paths - mkfs: discard phase is interruptible - documentation updates - cleaned spec file - Removed patches: * 0162-btrfs-progs-fix-loop-device-mount-checks.patch * 0165-Revert-btrfs-progs-update-options-in-find-root.c.patch * 0166-Btrfs-progs-add-some-verbose-output-to-find-root.patch - bump version to 3.12 - update tarball and remove upstreamed patches - fsck, image, restore: various improvements and fixes - btrfs: quota rescan (fate#312751) - fsck updates - more mkfs sanity checks - qgroup rescan wait - Added patches: * 0050-Btrfs-progs-commit-the-csum_root-if-we-do-init-csum-.patch * 0051-btrfs-progs-Fix-getopt-on-arm-ppc-platforms.patch * 0052-btrfs-progs-fix-duplicate-__-su-typedefs-on-ppc64.patch * 0053-btrfs-progs-use-reentrant-localtime.patch * 0054-btrfs-progs-don-t-have-to-report-ENOMEDIUM-error-dur.patch * 0055-Btrfs-progs-added-btrfs-quota-rescan-w-switch-wait.patch * 0056-btrfs-progs-fix-qgroup-realloc-inheritance.patch * 0057-Btrfs-progs-fix-restore-command-leaving-corrupted-fi.patch * 0058-btrfs-progs-avoid-write-to-the-disk-before-sure-to-c.patch * 0059-btrfs-progs-error-if-device-for-mkfs-is-too-small.patch * 0060-btrfs-progs-error-if-device-have-no-space-to-make-pr.patch * 0061-btrfs-progs-calculate-available-blocks-on-device-pro.patch * 0062-Btrfs-progs-keep-track-of-transid-failures-and-fix-t.patch - Change udev rule filename in setup-btrfs.sh to /usr/lib/udev/rules.d/64-btrfs.rules from from /usr/lib/udev/rules.d/80-btrfs.rules (bnc#839960 comment#7) - Remove udev rules file - udev packages one itself (bnc#839960). - update to upstream master (194aa4a1) - btrfs-restore: deal with NULL returns from read_node_slot - btrfs-restore: use the correct leafsize when reading the FS location - btrfs-find-root: Add options to control generation and level - btrfsck: fix incorrect casting on items in the corrupt_blocks tree - Btrfs-progs: fix closing of devices - Btrfs-progs: enhance btrfs-image to restore image onto multiple disks - Btrfs-progs: cleanup btrfs-image usage - Btrfs-progs: delete fs_devices itself from fs_uuid list before freeing - Btrfs-progs: skip open devices which is missing - Btrfs-progs: fix misuse of skinny metadata in btrfs-image - Btrfs-progs: recover raid0/raid10/raid5/raid6 metadata chunk - Btrfs-progs: Add chunk rebuild function for RAID1/SINGLE/DUP - Btrfs-progs: introduce list_{first, next}_entry/list_splice_tail{_init} - Btrfs-progs: Add chunk recover function - using old chunk items - Btrfs-progs: Add block group check funtion - Btrfs-progs: extend the extent cache for the device extent - Btrfs-progs: use rb-tree instead of extent cache tree for fs/file roots - Btrfs-progs: introduce common insert/search/delete functions for rb-tree - Btrfs-progs: cleanup similar code in open_ctree_* and close_ctree - Btrfs-progs: Don't free the devices when close the ctree - Btrfs-progs: don't close the file descriptor 0 when closing a device - Btrfs-progs: fix missing recow roots when making btrfs filesystem - Add fix for passing super_nr while opening ctree - btrfs-progs-mkfs-default-extref.diff: turn on extended refs by default, (aka hardlink count limtitation) (bnc#835695) - added 0040-btrfs-progs-fix-loop-device-mount-checks.patch: fix loop mount detection again (bnc#834173) - Simplify checks in mkinitrd scripts. They are always true because they come from the same package Use relative paths to binaries - Move udev rules to /usr. - Adjust rules to call binary from /usr - Simplify fsck.btrfs, its just a dummy until fixed - update to upstream master (f00dd8386a57d241d0f7c) - Make requirement on libattr-devel explicit - initrd support: add module (bnc#750185, bnc#727383) - set correct file mode if writing replacement fsck - fix build failure - add btrfs-debug-tree to initrd - adjust fs size to correct size (bnc#744593) - man page documentation updates - do not package obsolete utilities - mkfs: store correct size of device in superblock (bnc#730103) - updated restriper/balance commands to match kernel version - place binaries in /usr tree (UsrMerge project) - adjust mkinitrd scrippt accordingly - add btrfsck repair options for: - rebuild extent records - fix block group accounting - reset csums for rescue nodatasum mount - prune corrupt extent allocation tree blocks - device scanning fixes for dm and multipath (bnc#749540) - initrd support: move btrfs device scan after block device setup - documentation updates - add csize for file commpressed size - updated restore utility - patch license to follow spdx.org standard - btrfs-progs-fix-open_ctree_usage_segfaults.patch: fix segfaults from bnc#710486 due to unchecked usage of return value of open_ctree() [fixed compilation warnings] - pull upstream, replace existing patches, spec update - update 'restore' utility - lzo support - tools may now take earlies superblock when opening the fs - other fixes - pull integration-20111030 branch - mkfs: force mkfs if desired - other fixes - add btrfs-dump-super to mkinitrd - other fixes - skip non-existent devices or without media - documentation updates - scrubbing single device - graceful error handling when opening fs fails - updated mkinitrd script to scan devices before mount (bnc#727383) - add several tools to mkinitrd if root fs is btrfs - pull upstream branch and delete local patches - btrfsck: ignore -a (bnc#655906) - btrfsck: fix strerror value - Remove redundant tags/sections from specfile - Use %_smp_mflags for parallel build - add patch for local version override as we do not build from git, and avoid doubled "Btrfs" in output of 'btrfs' - reorder help for 'get-default' right after 'set-default' - add option -p to print parent subvolume - add subvolume 'get-default' subsubcommand - remove debugging printf from 0001-Btrfs-progs-add-a-btrfs-select-super-command-to-over.patch - add support for currently available kernel features: - add scrub subcommand - scan /proc/partitions by default (or use --all-devices for all) - mkfs fixes and improvements - documentation fixes - fix failing on deleted loop mounts (bnc#697671) - update from git: - add btrfs-select-super utility - add btrfs-label utility - allow mixed data+metadata (option --mixed) - allow populating new filesystem with files (option --rootdir) - allow discard support in mkfs - lzo support - deprecate 'btrfsctl' 'btrfs-vol' 'btrfs-show' - other bugfixes and documentation improvements - change to a hardlink - add link for fsck.btrfs (bnc#665899) - update to v0.19-35-g1b444cd: * used space accounting fix for the converter * Add btrfs-list for listing subvolumes * Add new util: 'btrfs' * multidevice support for check_mounted * check slash in deleting subvolumes * Add btrfsck option to select the super block copy * btrfs-debug-tree: add -d option to print only the device mapping - fix crash on creating filesystems (bnc#603620) - revert last change (bnc#599224#c3) - add hardlink from fsck.btrfs (bnc#599224) - fix memory leak (bnc#537633) - Updated to latest repo version. - used space accounting fix for the converter - btrfsctl: add snapshot/subvolume destroy ioctl - btrfsck: check root back/forward references - Add btrfs-map-logical program to map and read logical block numbers - build btfs-convert (bnc#572912) - enable parallel build - added Supplements - move apps to /sbin - update to 0.19: - build with rpm optflags - install man pages - fix leak in extends checking (bnc#523447) ==== cantarell-fonts ==== Version update (0.0.17.2 -> 0.0.18) - Update to version 0.0.18: + Respaced t, 4 and 7. + Bold accents fixes. + Consistent stem width and various improvements on E, H, B and S. + Harmonized o and c. + Improved capitals. + Superscript 123 fixes. + Extra glyps for gtk+ (arrows, openbox). ==== dracut ==== - Add dracut-rpmlintrc - Fix permissions of various scripts, as patch does not create executable files - Fix format of patch disablement - Add 0204-mkinitrd-fix-monster.patch: - Implement functionality of -A option - Without this patch, -A sets host_only=0, but host_only wasn't used - Translates into --no-host-only now - References boo#935993 - Add 0402-driver-fail-summary.patch: - Port 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch: Subject: Enable warning for failed kernel moduiles Enabled Warning for failed kernel modules per default and added summary of those to the end of dracut output References: bnc#886839 - Disable inline warnings in favour of summary - Add 0203-no-fail-builtin-module.patch: Don't let inst1mod fail if module is built-in - Fixes bsc#935563 ==== four-in-a-row ==== Version update (3.18.1 -> 3.18.2) Subpackages: four-in-a-row-lang - Update to version 3.18.2: + Updated translations. ==== gcin-branding-openSUSE ==== - fix changelog style - Rename gcin-tray.png to gcin_tray.png (Upstream change) - Add missing icons (using upstream icons) - Remove size 30 dir ==== geoclue2 ==== - Correct geoclue2-permit-gnome-maps.patch to include system=false, all services are supposed to have a system section. Fixes (boo#953865). ==== gnome-klotski ==== Version update (3.18.1 -> 3.18.2) Subpackages: gnome-klotski-lang - Update to version 3.18.2: + Updated translations. ==== gnome-robots ==== Version update (3.18.0 -> 3.18.1) Subpackages: gnome-robots-lang - Update to version 3.18.1: + Updated translations. ==== gnome-shell ==== Subpackages: gnome-shell-browser-plugin gnome-shell-calendar gnome-shell-wayland - Drop fortune recommends: Wanda has been removed with GNOME 3.12. ==== gnome-software ==== Version update (3.18.2 -> 3.18.3) Subpackages: gnome-software-lang - Update to version 3.18.3: + Use the correct user agent string when downloading firmware. + Fix a crash in the limba plugin. + Fix installing web applications. + Updated translations. ==== gnome-sudoku ==== Version update (3.18.1 -> 3.18.2) - Update to version 3.18.2: + Updated translations. ==== grep ==== Version update (2.21 -> 2.22) - testsuite.patch: disable unreliable test mb-non-UTF8-performance - GNU grep 2.22: * Improve performance for patterns containing very long strings * Output and pattern matching bug fixes - drop add gnulib-perl522.patch, changed upstream - drop grep-F-heap-overrun.patch, included upstream ==== laptop-mode-tools ==== Version update (1.64 -> 1.67) - Update to version 1.67: + Relax minimum window size to accomodate low res screens. + Fix variable name to comply with our "constants" assuptions. + Get more aggressive in power saving for Intel HD Audio. + Account Device Mapper devices. + Add swsusp freeze support. + Switch battery-level-polling default to True. + Detect ethernet carrier, early and relibaly. + Changes the boolean setting *_ACTIVATE_SATA_POWER to a customizable *_SATA_POLICY, with backward-compatible defaults and documentation. - Changes from version 1.66: + Handle device names with whitespaces. + Detach reliably closing all descriptors. + Add new Radeon power saving module. + Don't run LMT if it is disabled in config file. + GUI Tool refactoring. - Changes from version 1.65: + Fix grep error on missing $device/uevent. + ethernet: replace sysfs/enabled by 'ip link down'. + wireless-iwl-power: sysfs attr enbable -> enabled. + wireless-iwl-power: Add iwlwifi support. + Use Runtime Power Managemet Framework is more robust now. Deprecates module usb-autosuspend. + Fix multiple hibernate issue. + When resuming, run LMT in force initialization mode. + Add module for Intel PState driver. + GUI: Implement suspend/hibernate interface. - Rebase laptop-mode-1.49-new-dirty-ratio-defaults.diff. - Package new module-helper pm-freeze. ==== libldb1 ==== Subpackages: libldb1-32bit - Add doxygen at build time to add the development documentation. - Disable rpath-install and silent-rules while configure. ==== libassuan-devel ==== Version update (2.3.0 -> 2.4.0) Subpackages: libassuan0 - libassuan 2.4.0: * New flags "socks" and "tor-mode" for assuan_sock_{set,get}_flag. * New function assuan_sock_connect_byname. * Require at least libgpg-error 1.17. * Interface changes relative to the 2.3.0 release: assuan_sock_connect_byname NEW. ASSUAN_SOCK_TOR NEW. ASSUAN_SOCK_SOCKS NEW. assuan_sock_set_flag EXTENDED. assuan_sock_get_flag EXTENDED. ==== libbluray1 ==== Version update (0.9.0 -> 0.9.1) - Update to version 0.9.1 + Improved BD-J security. + Improved error resilience. + Improved seeking (avoid skipping PAT/PMT/PCR). + Fix UO mask check when bd_play_title() is used for Top Menu. + Fix re-starting of title bound Xlets when title changes. + Fix loading classes with invalid debug info. ==== canberra-gtk-play ==== Subpackages: libcanberra-devel libcanberra-gtk-module-common libcanberra-gtk0 libcanberra-gtk0-32bit libcanberra-gtk2-module libcanberra-gtk2-module-32bit libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra0 libcanberra0-32bit - Split out a new sub-package canberra-gtk-play-gnome: Currently there are no desktop-login, desktop-logout or session-ready sounds in the freedesktop sound theme, so installing this will require a different sound-theme for it to be operational. Having this in a own sub-package will avoid logspam about missing files. Fixes boo#953862. ==== libsndfile-devel ==== Subpackages: libsndfile1 libsndfile1-32bit - VUL-0: libsndfile 1.0.25 heap overflow (CVE-2015-7805, bsc#953516) libsndfile-src-common.c-Fix-a-header-parsing-bug.patch libsndfile-fix-header-read-CVE-2015-7805.patch - VUL-0: libsndfile 1.0.25 heap overflow (CVE-2015-8075, bsc#953519) libsndfile-psf_strlcpy_crlf-fix-CVE-2015-8075.patch - Fix the build with SLE11-SP3 due to AM_SILENT_RULE macro - VUL-1: libsndfile DoS/divide-by-zero (CVE-2014-9756, bsc#953521): libsndfile-src-file_io.c-Prevent-potential-divide-by-zero.patch ==== libspectre-devel ==== Subpackages: libspectre1 - Replace the logic in the prep section to use zypper in order to verify the version. The previous version had issues on openSUSE 13.2. - Add libspectre-gs-9.18.patch: Fix building with ghostscript 9.18; patch only applied when building against GS 9.18+ (boo#953149). ==== mozilla-nspr ==== Version update (4.10.9 -> 4.10.10) Subpackages: mozilla-nspr-devel - update to version 4.10.10 (bnc#952810) * MFSA 2015-133/CVE-2015-7183 (bmo#1205157) memory corruption issues ==== libfreebl3 ==== Version update (3.20 -> 3.20.1) Subpackages: libsoftokn3 mozilla-nss mozilla-nss-certs mozilla-nss-devel mozilla-nss-tools - update to NSS 4.20.1 (bnc#952810) * requires NSPR 4.10.10 * MFSA 2015-133/CVE-2015-7181/CVE-2015-7182 (bmo#1192028, bmo#1202868) memory corruption issues ==== nemiver ==== Subpackages: nemiver-lang - Own dirs to fix build for openSUSE 13.2. ==== perl-DateTime-Locale ==== Version update (0.920000 -> 1.010000) - updated to 1.01 see /usr/share/doc/packages/perl-DateTime-Locale/Changes 1.01 2015-11-07 - Prevent CPAN from indexing the tools directory, which is just for the author's use. 1.00 2015-11-07 * All of these changes were originally released in previous trial releases, but I'm repeating them here for clarity. [ENHANCEMENTS] - This release uses the locale data from CLDR version 28. The last major update of the locale data used CLDR 1.7.1, released in 2009, so this is a big change. Many things have changed in terms of locale data. - Some locales are no longer available because they are not in the CLDR data. - The CLDR data no longer includes default date and time format lengths. This is now "medium" for every locale, simply to provide some level of backwards compatibility. - Loading DateTime::Locale itself is now quite a bit faster. The whole locale registration system has been removed entirely, except for custom locales. This fixes RT #78794. Requested by Michael Conrad. - A long-standing issue with the Austrian locale not using the Austrian name for January has been fixed. RT #52337. Reported by Thomas Klausner. [BACKWARDS INCOMPATIBILITIES] - This is a big new release, and includes a number of backwards-incompatible changes. However, most users should be unaffected by this change. If you only use this module via DateTime.pm, you are unlikely to notice any changes other than changes to the locale data. - The old API deprecated since 0.40 has been removed (almost) entirely. - We now refer to things as "code" in the docs and method names where we used to call them ids. This includes locale, language, script, territory, and variant codes. This is more in line with the various ISO standards and the CLDR packages. - All the $locale->*_id methods (including $locale->id) are deprecated. Use the relevant $locale->*_code method instead. - The canonical form of the locale codes now uses dashes (-) instead of underscores (_). Loading a locale with an underscore in the name (e.g. en_US) still works. - The way that locale data is packaged has changed quite a bit. We no longer package each locale in its own class. Instead, all locale data is in a single module (mostly in a __DATA__ section) and loaded into memory as needed. If you have any code that checks $locale->isa, that code may break. - Locales are no longer subclasses of DateTime::Locale::Base. This module is still included in the distribution in case someone has a custom locale that inherits from this module. However, this module will go away in a future release. z - The "ii-*" aliases for the "he-*" locales have been removed. - The "no-*" aliases for the "nn-*" locales have been removed. - The value of $locale->code no longer reflects the value passed to DateTime::Locale->load. This only affects aliases and non-canonical forms of the code. For example, if you load "en_US" then $locale->code will return "en-US". If you load "C" or "POSIX" the returned code will be "en-US-POSIX". - All of the documentation related to creating aliases and registering custom locales has been removed. All of these methods still work, but I don't think this system got much use, so I don't want to emphasize it in the docs. (But let me know if you are using this and want to see these docs restored). 0.96 2015-10-04 (TRIAL RELEASE) - Locale data with characters in the 0x80-0xFF range was not marked as UTF-8 by Perl. This could cause all sorts of weirdness and was generally bad. 0.95 2015-09-30 (TRIAL RELEASE) - Added .pod files for each locale that document the data for that locale. 0.94 2015-09-30 (TRIAL RELEASE) - Restored the datetime_format method to individual locale objects for backwards compatibility. 0.93 2015-09-28 (TRIAL RELEASE) - Really release a trial release this time. I'm not kidding. See 0.90 for the interesting changes. ==== perl-Moose ==== Version update (2.1603 -> 2.1604) - updated to 2.1604 see /usr/share/doc/packages/perl-Moose/Changes 2.1604 2015-11-07 [OTHER] - minimum perl requirement is now set in configure-requires, as well as runtime-requires, to ensure that smokers bail out early enough to declare the installation N/A rather than FAIL. ==== rsyslog ==== Version update (8.13.0 -> 8.14.0) - rsyslog 8.14.0: * add property "rawmsg-after-pri" * bugfix: potential misadresseing in imfile * bugfix: re_extract RainerScript function did not work ==== squashfs ==== - add patches to fix eventual file corruption (boo#953723) 0001-mksquashfs-fix-rare-race-in-fragment-waiting-in-file.patch 0002-Fix-2GB-limit-of-the-is_fragment-.-function.patch ==== libtalloc2 ==== Subpackages: libtalloc2-32bit python-talloc python-talloc-32bit - Point LD_LIBRARY_PATH to the just-built libraries while calling make test. - Create a 2nd talloc-man spec-file to avoid a build cycle. - Recommend to install talloc-man from libtalloc-devel. - Add doxygen at build time to add the development documentation. - Disable rpath-install and silent-rules while configure. ==== libtdb1 ==== Subpackages: libtdb1-32bit - Add doxygen at build time to add the development documentation. - Disable rpath-install and silent-rules while configure. ==== libtevent0 ==== Subpackages: libtevent0-32bit - Disable rpath-install and silent-rules while configure. ==== translation-update ==== Version update (12.3 -> 13.2) - Obsolete all language packages that are no longer distributed (boo#952855#c41) and add support for it in supplementary scripts (translation-update-spec-generate-lang-list.sh, translation-update-spec-reset-lang-list.sh). - Reset translation-update-from-translation-update-upstream-20140905.tar.bz2. * all language subpackages disappear - translation-update-spec-generate-lang-list.sh: Prefer X-Poedit-Language for spec file summary. ==== xdm ==== - rename SuSEconfig.xdm * /etc/X11/xdm/SuSEconfig.xdm -> /etc/X11/xdm/SUSEconfig.xdm * created a symlink for the old file (bsc#953563). ==== yast2 ==== Version update (3.1.155 -> 3.1.156) Subpackages: yast2-devel-doc - Fixed clipped dialog label (bsc#948381) - 3.1.156 ==== yast2-kdump ==== Version update (3.1.33 -> 3.1.34) - manage the value of the fadump kernel param (bsc#951212) - 3.1.34 ==== zsh ==== - Remove -Wl,-z,now it breaks module loading rh#1277996 Removed packages: fortune python3-xdg translation-update-cs > translation-update-da > translation-update-de > translation-update-el > translation-update-en_GB > translation-update-en_US > translation-update-es > translation-update-fr > translation-update-hu > translation-update-it > translation-update-ja > translation-update-pl > translation-update-pt > translation-update-pt_BR > translation-update-ru > translation-update-zh_CN > translation-update-zh_TW Added packages: perl-Text-Soundex python3-pyxdg xf86-video-amdgpu zisofs-tools -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed starts slowly without the installation stick
by Albert Kapune 11 Nov '15

11 Nov '15

Hello, I made a fresh install of openSuSE Tumbleweed from an USB stick and everything went ok so far. As long as the stick is plugged into the computer Tumbleweed performs a quick boot within one minute. However, if the stick is removed Tumbleweed takes about four to five minutes to boot; when finally ready it works at normal speed. The fstab does not contain any stick entries. Any ideas? Thank you and kind regards Albert -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Possible trademark violation with new Tumbleweed Logo
by Jon Grossart 11 Nov '15

11 Nov '15

Since I saw that it's being used more officially now than just the mockups for the new page (and selling merchandise), there is a potential trademark issue with the new TW logo. It's basically just a flipped version of the registered trademark for Terracycle. https://www.terracycle.com/ Plus, there are similar corporate colors and even sort of similar theme (recycling keeps things moving forward/renewed). However, it is a different industry, so depending on their trademark status, may be different enough. Jon -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Install DVD ISO Leap Tumbleweed
by Günther J. Niederwimmer 11 Nov '15

11 Nov '15

Hello, last weekend i like to install a new Version of Leap and later Tumbleweed but this is not possible ? I download the ISO's three Times and control the checksum and change the computer for burning, but it is NOT possible to install this versions in EFI Mode. With the 13.2 ISO I have no Problems? are the new Leap and tumbleweed ISO broken ? -- mit freundlichen Grüßen / best regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 12

[opensuse-factory] [Tumbleweed-i586-20151106 KO] Failed to create mount unit file /run/systemd/generator/sysroot.mount when installing
by James PEARSON 11 Nov '15

11 Nov '15

Hello all I did a "zypper dup" on the girl friends i586 machine this morning before going to work and to my surprise things didn't work out right. One of the error messages follows: [ 4.033715 systemd-fstab-generator[56]: Failed to create mount unit file /run/systemd/generator/sysroot.mount, as it already exists. Duplicate entry in /etc/fstab? I decided to do a fresh install as per usual to calm matters at home this evening so I downloaded and installed openSUSE-Tumbleweed-DVD-i586-Snapshot20151106-Media.iso media I also got the above message when installing regardless of whether the media was burnt to a usb key or a DVD. Remark 1 : The sha256sum checked OK Remark 2 : I chrooted the unsuccessfully installed i586 system and checked /etc/fstab file and found no duplicate entries. I also downloaded and installed Tumbleweed using the openSUSE-Tumbleweed-NET-i586-Snapshot20151106-Media.iso media. The installation went fine but I had the same error message when I rebooted. Things could be worst. VMware Workstation is up and running on my main machine using new the 4.3.0-1-default kernel on Tumbleweed 64-bit architecture :) Home:/ # uname -a Linux Home 4.3.0-1-default #1 SMP PREEMPT Mon Nov 2 15:35:09 UTC 2015 (7b374a4) x86_64 x86_64 x86_64 GNU/Linux Any and all comments however on how I can get the girlfriend i586 system up and running again would be greatly appreciated! Many thanks in advance Regards James -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4