September 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Broken Packet with SLES Update
by Günther J. Niederwimmer 22 Sep '13

22 Sep '13

Hello, I like to inform, the last Kernel Update for SLES 11 SP3 have a broken Packet in the /extra Directory "kenel-xen-extra" Wrong md5 SUM ? -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] Terminal window in 13.1
by Basil Chupin 22 Sep '13

22 Sep '13

When I open a terminal there are 2 things present- 1. the Menubar and 2. a "Taskbar" - or whatever it's called - at the bottom of the window. I always deselect the Menubar but in 13.1 this deselection won't "stick" and the darn thing keeps reappearing the next time I open the terminal. I also always remove the bottom "Taskbar" as it is useless and only takes up screen space -- but I cannot find the place where I can remove it. I did it in 12.3 but forgot where this was done (in 12.2 it was part of the Edit Profile section but this was moved somewhere in 12.3). Could someone please tell me where to go to to remove this "Taskbar"? And re 1 above, anyone know how to make the removal of the Menubar "stick"? BC -- Using openSUSE 12.3, KDE 4.11.1 & kernel 3.11.1-3 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 6

[opensuse-factory] "multi-user.target" drops network connection (and more)
by Kyrill Detinov 22 Sep '13

22 Sep '13

Hello. Running the latest Factory x86_64 (it looks like 13.1 Beta 1). Changing runlevel to multi-user.target (init 3) drops my network connection: # runlevel N 5 # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:13:D3:A2:29:DF inet addr:172.31.1.3 Bcast:172.31.1.255 Mask:255.255.255.0 inet6 addr: fe80::213:d3ff:fea2:29df/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:71945 errors:0 dropped:0 overruns:0 frame:0 TX packets:28368 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:24891189 (23.7 Mb) TX bytes:3509001 (3.3 Mb) Interrupt:16 # systemctl status network.service network.service - LSB: Configure network interfaces and set up routing Loaded: loaded (/usr/lib/systemd/system/network.service; enabled) Active: active (exited) since Fri 2013-09-20 08:17:22 MSK; 14h ago Process: 710 ExecStart=/etc/init.d/network start (code=exited, status=0/SUCCESS) Sep 20 08:17:21 lazy network[710]: Setting up network interfaces: Sep 20 08:17:21 lazy network[710]: lo Sep 20 08:17:21 lazy network[710]: lo IP address: 127.0.0.1/8 Sep 20 08:17:22 lazy network[710]: ..done..done eth1 Startmode is 'off' -> skipping Sep 20 08:17:22 lazy ifup[1383]: eth1 Startmode is 'off' -> skipping Sep 20 08:17:22 lazy network[710]: ..skippedSetting up service network . . . . . . . . . . . . ...done Sep 20 08:17:22 lazy systemd[1]: Started LSB: Configure network interfaces and set up routing. This is the first strange thing: eth0 isn't displayed in the status. # systemctl isolate multi-user.target # runlevel 5 3 # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:13:D3:A2:29:DF BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:71955 errors:0 dropped:0 overruns:0 frame:0 TX packets:28384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:24893137 (23.7 Mb) TX bytes:3510177 (3.3 Mb) Interrupt:16 Network is down. gpm (console mouse) service has also get down. It was happened about a week ago, after some of systemd updates. -- WBR Kyrill

2 2

[opensuse-factory] Why cups shipped with openSUSE built without libusb support?
by Vitaliy Tomin 21 Sep '13

21 Sep '13

I've checked 12.3's and Factory cups packages and they built without libusb support enabled (--enable-libusb). Is there some reason to build it this way or this option missed by maintainers? Some simple printers/cups filters works fine only with libusb access, but not with usblp kernel module (currently only avaliable). I suppose to enable libusb support for cups in 13.1, to support more printers. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Mate in OpenSUSE 13.1
by denisart benjamin2 20 Sep '13

20 Sep '13

Hello everyone ! I hoped to be able to submit Mate packages to Factory for OpenSuse 13.1, but security review is not done. Only two services files need a review again, /etc/dbus-1/system.d/org.mate.SettingsDaemon.DateTimeMechanism.conf and /usr/share/dbus-1/system-services/org.mate.SettingsDaemon.DateTimeMechanism.service from mate-settings-daemon. Can someone do something about it ? Thanks. Regards. Benjamin Denisart -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] E: badness 20000 exceeds threshold 1000, aborting.
by Andrey Borzenkov 20 Sep '13

20 Sep '13

I try to rebuild mailman with htdig patch but I get [ 149s] (none): E: badness 20000 exceeds threshold 1000, aborting. I compared build logs with devel project and it has the same amount of warnings; the only difference is /proc warnings [ 140s] warning: Failed to read auxiliary vector, /proc not mounted? [ 140s] warning: Failed to read auxiliary vector, /proc not mounted? but I normally always see them in build logs and so far they did not cause any harm. Could someone explain where this badness comes from? https://build.opensuse.org/package/rawlog/home:arvidjaar:branches:server:ma… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] swap isn't activated
by Kyrill Detinov 20 Sep '13

20 Sep '13

Hello. After recent Factory update I see that swap partition isn't activated at boot. 20:42 root@lazy ~ # grep swap /etc/fstab /dev/disk/by-id/ata-ST340016A_3HS2P9CK-part4 swap swap defaults 0 0 20:42 root@lazy ~ # free total used free shared buffers cached Mem: 3346984 731144 2615840 0 55796 229264 -/+ buffers/cache: 446084 2900900 Swap: 0 0 0 I do it manually. 20:43 root@lazy ~ # swapon /dev/disk/by-id/ata-ST340016A_3HS2P9CK-part4 20:43 root@lazy ~ # free total used free shared buffers cached Mem: 3346984 735816 2611168 0 55812 229464 -/+ buffers/cache: 450540 2896444 Swap: 4372476 0 4372476 openSUSE Factory x86_64. -- WBR Kyrill

2 6

[opensuse-factory] Fwd: New DE : Mate
by Benjamin Denisart 20 Sep '13

20 Sep '13

Hello everyone ! As you probably all know, Stefano Karapetsas has introduce Mate during the OSC. I will quickly summarize it : MATE is a fork of GNOME 2. It provides an intuitive and attractive desktop to Linux users using traditional metaphors. he MATE Desktop Project is dedicated to keeping alive the traditional GNOME2 desktop metaphor. Many users liked this desktop, and found it simple, configurable, and comfortable to use. Our goal is to continue the development of this desktop environment, adding new features, fixing bugs, and improving the software as support libraries and other dependent software improved and changes. Differences between Gnome2 and Mate : - Removed obsolete technologies and replaced it with modern one - Some new features - Bugfixes - GTK3 themes support Future of Mate - Support GTK3 and Wayland - Complete support for systemd - Support GStreamer 1.0 - Support AccountsService - Window snapping in window manager - Plugin system for file manager - Remove useless forks and use GNOME equivalent ( gnome-keyring, gweather, yelp-tools, libwnck, etc.) I think you all agree to say that MATE is become very popular, maybe essential for every Linux distribution, and that the case for the most popular distributions, I think MATE must be include into OpenSUSE. The question is, of course : Do we wan't MATE in OpenSUSE ? Thanks in advance. Best regards. Benjamin Denisart -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

12 20

[opensuse-factory] New pattern(s) | LeechCraft
by Dmitriy Perlow 20 Sep '13

20 Sep '13

Hello! LeechCraft is a modular live environment. It provides lots of features such as IM, blogging, browser, player and many other: http://leechcraft.org/ Is it possible to add a set of patterns for leechcraft to openSUSE Factory and/or 13.1? If yes, could you please give me a link how to do it? -- Dmitriy DA(P).DarkneSS Perlow / Linux x64 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] B1 in qemu-kvm is dead after host suspend/resume
by Andrey Borzenkov 20 Sep '13

20 Sep '13

I do not know if it is supposed to work, but it mostly worked with 12.3 guest. Start qemu-kvm, suspend host, resume. With 12.3 guest continued to run. With B1 guest is dead, I have to kill it. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0