July 2010 - openSUSE Factory - openSUSE Mailing Lists

Re: [opensuse-factory] KDE logging out on its own as I try to work?
by Greg Freemyer 13 Jul '10

13 Jul '10

On Mon, Jul 12, 2010 at 1:54 PM, Bernhard M. Wiedemann <bernhardout(a)lsmod.de> wrote: > Am 11.07.2010 23:09, schrieb Greg Freemyer: >> All, >> >> I've been occasionally using my laptop today and 3 or 4 times, as I'm >> working with firefox, it just logs me out. >> >> Is this a known bug? Or am I the lucky one. >> >> note: I did enable the 11.3 packman repo recently, so it could be >> something I brought in from there. >> >> Greg >> > also had sporadic unprovoked Xorg crashes since RC2. > https://bugzilla.novell.com/show_bug.cgi?id=620385 > > IIRC packman usually does not replace X stuff > you can check for installed packman packages with > rpm -qa|grep '\.pm\.' > > Bernhard M. > I filed a bug and assigned it to Stephen Dirsch. Unfortunately I can't reproduce it right now and my log doesn't look like it captured the crash to me. (I've rebooted at least once since the last crash.) https://bugzilla.novell.com/show_bug.cgi?id=621754 None of my PM stuff looks like its related: # rpm -qa|grep '\.pm\.' warning: waiting for shared lock on /var/lib/rpm/Packages hddtemp-0.3_beta15-10.pm.11.1.i586 libfaad2-2.7-1.pm.6.1.i586 libtheoradec1-1.1.0-0.pm.1.1.i586 libfaac0-1.28-1.pm.3.11.i586 libxine1-codecs-1.1.18.1-1.pm.39.4.i586 libx264-78-0.0svn20091023-0.pm.1.4.i586 libx264-84-0.0svn20100205-0.pm.1.1.i586 libopencore-amrnb0-0.1.2-0.pm.2.14.i586 libamrnb3-7.0.0.2-0.pm.2.11.i586 libcaca0-0.99.beta17-0.pm.1.1.i586 libxvidcore4-1.2.2-3.pm.4.15.i586 liboil-0_3-0-0.3.17-0.pm.2.52.i586 wxWidgets-2.8.10.1-2.pm.3.1.i586 libmp3lame0-3.98.4-1.pm.2.3.i586 libopencore-amrwb0-0.1.2-0.pm.2.14.i586 libtheoraenc1-1.1.0-0.pm.1.1.i586 libavutil50-0.5.23289svn-0.pm.6.1.i586 libavcodec52-0.5.23289svn-0.pm.6.1.i586 rails-1.1.1-0.pm.1.1.noarch libamrwb3-7.0.0.3-0.pm.2.13.i586 libtwolame0-0.3.12-1.pm.4.14.i586 libdca0-0.0.5-1.pm.3.16.i586 libx264-75-0.0svn20090922-0.pm.1.1.i586 libx264-95-0.95svn20100517-0.pm.2.6.i586 libpostproc51-0.5.23289svn-0.pm.6.1.i586 I'm upgrading now to the real 11.3 repo. I doubt it helps, but who knows. Greg -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Status: distribution
by Stephan Kulow 12 Jul '10

12 Jul '10

Hi, Just to let you know: I removed the 11.3 redirect. So if you have RC2, you can use zypper dup to update to GM. Good luck :) Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] KDE logging out on its own as I try to work?
by Greg Freemyer 12 Jul '10

12 Jul '10

All, I've been occasionally using my laptop today and 3 or 4 times, as I'm working with firefox, it just logs me out. Is this a known bug? Or am I the lucky one. note: I did enable the 11.3 packman repo recently, so it could be something I brought in from there. Greg -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

[opensuse-factory] Removing extracting cracklib library pop up message during installation in future revisions
by Roman Bysh 11 Jul '10

11 Jul '10

Hi all, During the initial installation, when I fill out my name and password, and clicking on the OK or Accept button. We keep getting a pop up message: "Extracting cracklib library" or something very similar. Can we look at suppressing this pop up in the future? Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] KDE live CD (build 0694) broken
by R. Tyler Ballance 11 Jul '10

11 Jul '10

I've been trying to get the KDE live CD ot cooperate in VirtualBox for some reviewing and the .iso just seems busted. I can neither get to the default KDE4 desktop nor execute an installation with the CD (there's an error creating partitions, the exact error I don't have handy at the moment). Wondering what steps I should be following to get a corrected Live CD built? Cheers, -R. Tyler Ballance -------------------------------------- Jabber: rtyler(a)jabber.org GitHub: http://github.com/rtyler Identica: http://identi.ca/dero Twitter: http://twitter.com/agentdero Blog: http://unethicalblogger.com

1 0

Re: [opensuse-factory] No Wifi after RC2 install
by A. den Oudsten 11 Jul '10

11 Jul '10

Op 08-07-10 17:35, Larry Finger schreef: > On 07/08/2010 09:52 AM, A. den Oudsten wrote: >> >> I have not sufficient knowledge to be able to choose between 'bad' and >> 'not bad' > > A bad one does not have a line that starts with "nameserver". >> >> After configuration SSID SpeedTouch D17287 with the WPA PSK code I got >> from the provider and where I found that kernel module ath5K played a >> role I got from iwconfig: >> >> lo no wireless extensions. >> >> eth0 no wireless extensions. >> >> wlan0 IEEE 802.11bg ESSID:off/any >> >> Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm >> >> Retry long limit:7 RTS thr:off Fragment thr:off >> >> Encryption key:off >> >> Power Management:off >> >> >> >> I have the feeling that I'm still missing some smal trick > > You have not associated/authenticated with the Access Point. My > suggestion about resolv.conf assumed that you had. Please check the > output of dmesg for messages regarding your wireless device. Does it > need firmware? Please post the section of the output of 'lspci -nnk' > that describes your device. > > I do not understand your comments about WPA PSK code from the > manufacturer and then ath5k. > Dmesg [ 14.060501] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 39.849914] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 90.783406] ADDRCONF(NETDEV_UP): wlan0: link is not ready lspci -nnk 05:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0136] Kernel driver in use: tg3 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01) Subsystem: AMBIT Microsystem Corp. AR5BXB63 802.11bg NIC [1468:0428] Kernel driver in use: ath5k This is what I could find. André -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] erroneous firefox message
by Thomas Taylor 11 Jul '10

11 Jul '10

I keep getting a message when starting firefox as user about an instance of firefox already running but not responding. When I run ps several times in a succession, the process number keeps changing as shown below: tom@laptop= / $ ps aux | grep firefox tom 8561 0.0 0.0 7664 808 pts/0 S+ 16:31 0:00 grep firefox tom@laptop= / $ ps aux | grep firefox tom 8565 0.0 0.0 7664 808 pts/0 S+ 16:32 0:00 grep firefox tom@laptop= / $ ps aux | grep firefox tom 8569 0.0 0.0 7664 808 pts/0 S+ 16:32 0:00 grep firefox tom@laptop= / $ ps aux | grep firefox tom 8573 0.0 0.0 7664 812 pts/0 S+ 16:32 0:00 grep firefox tom@laptop= / $ When I try to kill it with each of the process numbers it says the process does not exist. It doesn't seem to affect firefox which still starts and performs normally. Anyone else experience this behavior? Tom -- Tom Taylor - retired penguin openSuSE 11.3-RC2 x86_64 Fedora 13 KDE 4.4.3, FF 3.6.4 claws-mail 3.7.6 registered linux user 263467 linxt-At-comcast-DoT-net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Strange crash 11.3
by Cristian Rodríguez 10 Jul '10

10 Jul '10

Hi: In my workstation, the following odd situation happends with 11.3 Sometimes it randomly freezes. 1) Keyboard does not respond. 2) Sounds continue playing as normal 3) mouse only moves correctly 4) The desktop enviroment, looks fine, but clicking on the mouse makes no action whatsoever. 5) screen gets minimally garbled randomly in the right corner. I use an nvidia video card with the noveau driver. there is no evidence in the logs whatsoever. question is, where I can start looking ?

3 2

[opensuse-factory] using osc maintainer to bypass need for initial bug triage
by Felix Miata 10 Jul '10

10 Jul '10

On 2010/07/10 10:45 (GMT-0400) Cristian Morales Vega composed: > Patrick Shanahan composed: >> Stefan Seyfried composed: >>> Andreas Jaeger composed: >>> > bugowner of server:mail/mutt : >>> > WernerFink >>> > maintainer of server:mail/mutt : >>> > darix >>> This information is useless in bugzilla context - unless you know the >>> people already. External users have no way of searching for email adresses >>> in bugzilla, only novell internal users have this capability IIUC. >>> And even then, OBS usernames do not need to resemble anything that's also >>> present in bugzilla. >> revealed by "osc maintainer --help" >> Â Â -e, --email Â Â Â Â show email addresses instead of user names >> 08:56 wahoo:~ > osc maintainer server:mail mutt -e >> bugowner of server:mail/mutt : >> werner(a)novell.com >> maintainer of server:mail/mutt : >> mrueckert(a)novell.com > To summarize. To know to who you must assign a bug: > - The classic way > rpm -q --changelog <package> (or look at it from YaST sw_single) and > look at the most common emails from the top. > - Since the OBS > osc maintainer -e <project> <package> > - Since the new OBS web interface with anonymous access > There is a bug icon in the main window of each package. If you click > on it you are redirected to bugzilla with the Assign To field > correctly filled. > - In the future > Have that bug icon in the Software Portal, where users are expected to > look? (you can't expect users to know about the OBS or osc) Meanwhile > all this perhaps should be added to > http://wiki.opensuse.org/openSUSE:Bug_reporting_FAQ ?) Nothing above directly related to the original topic/thread. (antique Midnight Commander) -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] GM Candidat SoftRaid 5
by Günther J. Niederwimmer 10 Jul '10

10 Jul '10

Hello, have any tested to install the 702 on a new clear softRaid 5 Intel Matrix Storage System on my system the installation hang? The last message is, search for Linux Partitions? -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0