July 2024 - openSUSE Factory - openSUSE Mailing Lists

How to file bugs
by Ed Goforth 05 Dec '24

05 Dec '24

Whenever I try to log in to https://bugzilla.opensuse.org I get themessage "There is already an account with the login name sh33p(a)blisteringsheep.com."

4 3

Issues with suspend not actually suspending?
by Johannes Kastl 20 Nov '24

20 Nov '24

Hi all, did/does anyone else experience issues with suspending on Tumbleweed/MicroOS/Kalpa? Normally I can suspend my laptop by using the suspend buttons in Plasma6 or by issuing "systemctl suspend". Now it only works every third or fourth time. I works more reliably if I shut programs like Firefox and Thunderbird, but it still is not bullet-proof 100% working. It shows the look screen, freezes from some (20) seconds and then the login screen is shown again and the mouse responds again. I think it might have started Thursday a week ago. Two laptops, one Tumbleweed and one Kalpa immutable, both with Plasma6. Thinkpad T460s and Thinkpad T14 G2. Both updated almost daily to the latest snapshot. (This started before Plasma 6.1, so that should not be the reason.) Kind Regards, Johannes

5 15

Disabling /dev/fb0 on TW
by Thomas Zimmermann 23 Oct '24

23 Oct '24

tl;dr: Disable fbdev userspace interfaces on TW Hi, the upcoming Linux kernel v6.6 will contain the option to disable fbdev userspace interfaces in the kernel configuration. [1] I intent to enable this and thereby switch off /dev/fb0 et al. The tracker bug is boo#1212947. [2] * Why? The old fbdev subsystem is an endless source of bugs. For example, we recently had an out-of-bounds access in the fbdev emulation, where userspace could write beyond the end of the framebuffer memory. [3] Fbdev is under-maintained. I've been doing improvements in recent kernel releases, but only where it benefits the DRM subsystem. Disabling fbdev userspace interfaces will also help weeding out any programs that still contain hard dependencies on them. * What changes? Enabling the new kernel option disables all fbdev userspace interfaces. These are * the device files, such as /dev/fb0 * the sys files under /sys/class/graphics/fb[0-9]+ * /proc/fb * What are the effects on userspace programs? Userspace applications run on the desktop via Wayland or X. There will be no change to them. Xorg and Wayland compositors run on DRM interfaces. A few programs run on SDL, which has no dependency on fbdev either. Any fbdev support in these mid-layer components should be disabled as well. There's one known affected program: TW's text-mode installer can use the tool fbiterm to display CJK symbols during installation. This comes from a time when some low-end systems where not able to boot graphics installation. fbiterm has been unmaintained for >15 years and is ready for retirement. But there's no good drop-in replacement. I propose to simply remove fbiterm and let the graphics installer handle CJK. * What about the framebuffer console? The kernel-provided framebuffer console does not change. The kernel will still show the regular console. Userspace interfaces in /sys/class/graphics/fbcon are still available. For questions and discussion, please comment here or in boo#1212947. Best regards Thomas [1] https://elixir.bootlin.com/linux/v6.6-rc1/source/drivers/video/fbdev/core/K… [2] https://bugzilla.opensuse.org/show_bug.cgi?id=1212947 [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg)

12 35

Plan to delete vagrant & Virtualization:vagrant by the end of November
by Dan Čermák 18 Oct '24

18 Oct '24

Dear all, due to Hashicorp changing the license of vagrant to the BUSL, we can no longer update vagrant in openSUSE. I don't have the cycles to maintain vagrant myself indefinitely and plan to send a delete request at the end of November to Factory. Once that goes in, I also plan to remove the Virtualization:vagrant project to reduce the number of rubygems we have in openSUSE. If you don't like this plan and decide to scream at me, please scream an actionable plan that involves you :-) Cheers, Dan -- Dan Čermák <dcermak(a)suse.com> Software Engineer Development tools SUSE Software Solutions Germany GmbH Frankenstr. 146 90461 Nürnberg Germany www.suse.com Geschäftsführer: Ivo Totev, Andrew McDonald, Werner Knoblich (HRB 36809, AG Nürnberg)

6 14

Re: Snapshot 20240622 again broke my system
by ASSI 05 Oct '24

05 Oct '24

ASSI writes: > ASSI writes: > Had it happen again: the process that hangs is > plasma-fallback-session-save. This is on a machine where I only use a > manually saved session, so really it should not even try to save > something when I shutdown (via a hotkey I should add, I'll try to use > the session menu tomorrow). The other machine where it doesn't happen > has whatever the default session setup is and since I have not set up a > hotkey there I shut it down via the session menu. Of my four Tumbleweed installations, three have this problem and one does not. The one that works as expected is an installation from just one month ago, while the other ones are older. The hotkey setup is by now identical on all of them, so the failure to leave the plasma session in any way (and have plasma-fallback-session-save hang) must be with some other setting that was most likely converted from Plasma 5 and does not work correctly anymore. The whole shutdown procedure looks totally normal and leaves no errors in the system log until it stops doing anything, then killing the hanging process (expectedly) gives: --8<---------------cut here---------------start------------->8--- Jun 29 21:21:37 Gerda plasma-shutdown[18023]: org.kde.plasma.shutdown: plasma-fallback-session-save failed with return code -1 --8<---------------cut here---------------end--------------->8--- The rest of the shutdown does not show any errors other than a few that seem to be connected to me force-ending this process: --8<---------------cut here---------------start------------->8--- Jun 29 21:21:37 Gerda startplasma-x11[2129]: org.kde.startup: "kdeinit5_shutdown" QList() exited with code 255 Jun 29 21:21:37 Gerda kded6[2280]: XIO: fatal IO error 4 (Interrupted system call) on X server ":0" Jun 29 21:21:37 Gerda kded6[2280]: after 695 requests (695 known processed) with 0 events remaining. Jun 29 21:21:37 Gerda kwalletd6[2128]: The X11 connection broke (error 1). Did the X11 server die? Jun 29 21:21:37 Gerda kded6[2280]: The X11 connection broke: I/O error (code 1) Jun 29 21:21:37 Gerda kded6[2280]: org.kde.pulseaudio: No object for name "alsa_output.pci-0000_34_00.1.hdmi-stereo-extra1" Jun 29 21:21:37 Gerda kded6[2280]: org.kde.pulseaudio: No object for name "alsa_output.pci-0000_34_00.1.hdmi-stereo-extra1" Jun 29 21:21:37 Gerda kded6[2280]: org.kde.pulseaudio: No object for name "alsa_output.pci-0000_34_00.1.hdmi-stereo-extra1" Jun 29 21:21:37 Gerda systemd[2113]: xdg-desktop-portal-gtk.service: Main process exited, code=exited, status=1/FAILURE Jun 29 21:21:37 Gerda systemd[2113]: xdg-desktop-portal-gtk.service: Failed with result 'exit-code'. Jun 29 21:21:37 Gerda systemd[2113]: plasma-kwin_x11.service: Main process exited, code=exited, status=15/n/a Jun 29 21:21:37 Gerda systemd[2113]: plasma-kwin_x11.service: Failed with result 'exit-code'. Jun 29 21:21:37 Gerda systemd[2113]: Stopped KDE Window Manager. Jun 29 21:21:37 Gerda systemd[2113]: plasma-kwin_x11.service: Consumed 2min 19.383s CPU time. Jun 29 21:21:37 Gerda systemd[2113]: Stopped KDE Session Management Server. Jun 29 21:21:37 Gerda systemd[2113]: plasma-kded6.service: Main process exited, code=exited, status=1/FAILURE Jun 29 21:21:37 Gerda systemd[2113]: plasma-kded6.service: Failed with result 'exit-code'. --8<---------------cut here---------------end--------------->8--- Does anybody have an idea of where else to look? I notice that the whole thing now goes through systemd units/services, so possibly there might be a dependency problem as well. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

1 1

Glitches in Plasma6
by Jogchum Reitsma 18 Aug '24

18 Aug '24

Hi, I've posted this messages March 18, but while I see it in the archive, apparently it did not make it to my mailbox- no idea how that is possible. I'll give it try here again, slightly modified: Some small glitches after doing the upgrade to plasma 6: -The icon of the program starter is covered by the icon some program sitting on the task bar. I did not find out yes what the "algorithm" is, but so far the only way to get the correct icon is to enter the Edit mode for the panel setting, and change something. But as soon as one hovers over a program on the task bar, that icon supersedes the correct icon again. The tab's from the open programs on the taskbar initially have their corresponding icon, but if one hovers over it, the icon disappears, and only the describing text remains. The small icons for e.g. bluetooth and sound on the right also disappear when hovering over it, and they have no text as such, so it is a bit a guess to find what you need there. But if one hovers over them, you do see the pop-ups of the application under the mouse.. But for the rest, well done for such a massive release, I would say. Thanks! regards, Jogchum

3 4

New Tumbleweed snapshot 20240110 released!
by Dominique Leuenberger 15 Aug '24

15 Aug '24

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: certmonger (0.79.15 -> 0.79.19) eog (45.1 -> 45.2) git gnome-remote-desktop (45.0 -> 45.1) gnome-shell (45.2 -> 45.3) gvfs (1.52.1 -> 1.52.2) hwdata (0.377 -> 0.378) libgxps (0.3.2 -> 0.3.2+5) libstorage-ng (4.5.170 -> 4.5.171) libxkbcommon mutter (45.2 -> 45.3) nodejs21 (21.4.0 -> 21.5.0) publicsuffix (20231213 -> 20240107) redis (7.2.3 -> 7.2.4) sg3_utils (1.48+6.7f43e14 -> 1.48+7.63e63cb) transmission (4.0.4 -> 4.0.5) yast2-packager (5.0.1 -> 5.0.2) === Details === ==== certmonger ==== Version update (0.79.15 -> 0.79.19) - Update to 0.79.19 - Removed 0001-Disable-DSA-in-the-RPM-spec.patch - Added 0001-Update-tests-to-be-compatible-with-OpenSSL-3.2.patch ==== eog ==== Version update (45.1 -> 45.2) Subpackages: eog-lang - Update to version 45.2: + data: Update appdata. + Updated translations. ==== git ==== Subpackages: git-core git-email git-web perl-Git - gitweb AppArmor profile: allow reading etc/gitweb-common.conf (boo#1218664) ==== gnome-remote-desktop ==== Version update (45.0 -> 45.1) Subpackages: gnome-remote-desktop-lang - Update to version 45.1: + session: - Assert region size to be greater than 0 - Add debug message to also output new EI regions - Scale absolute pointer position with respect to the EI region - Clear all EI related instances before dbus session stop call - Only notify keysym when EI keyboard is available - Add struct for absolute pointer motion events + vnc-pipewire-stream: Don't remove buffer while dequeueing it + rdp-pipewire-stream: Don't remove buffer while dequeueing it + Adapt usage of abs pointer motion events to GrdEventPointerMotionAbs + Updated translations. ==== gnome-shell ==== Version update (45.2 -> 45.3) Subpackages: gnome-extensions gnome-shell-calendar gnome-shell-lang - Update to version 45.3: + Allow any enter key to be used to screenshot. + Fix spinner in light style variant. + Improve formatting of extension errors. + Fixed crash. + Misc. bug fixes and cleanups. + Updated translations. - Drop gnome-shell_nb_fix_trans.patch: fixed upstream. ==== gvfs ==== Version update (1.52.1 -> 1.52.2) Subpackages: gvfs-backend-afc gvfs-backend-goa gvfs-backend-samba gvfs-backends gvfs-fuse gvfs-lang - Update to version 1.52.2: + smb: Fix livelock when mounting share without enough permissions. + smb: Fi moving files across filesystem boundaries. + Updated transltions. ==== hwdata ==== Version update (0.377 -> 0.378) - update to 0.378: * Update pci, usb and vendor ids ==== libgxps ==== Version update (0.3.2 -> 0.3.2+5) - Update to version 0.3.2+5: + DOAP: Fix 'bug-database' value to point to GNOME GitLab Issues + images: - For jpeg images try to get the image resolution from exif first - Add support for jpeg images with CMYK color space + Fix compiler warnings + Fix meson warnings - Switch to git checkout via source service, use explicit commit. - Use ldconfig_scriptlets macro for post(un) handling. - Update URL to new home. - Drop no longer needed libgxps-rpmlintrc. ==== libstorage-ng ==== Version update (4.5.170 -> 4.5.171) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - merge gh#openSUSE/libstorage-ng#977 - provide light_probe function with SystemInfo parameter - 4.5.171 ==== libxkbcommon ==== Subpackages: libxkbcommon-x11-0 libxkbcommon0 libxkbregistry0 - add libxkbregistry-devel to baselibs for use by wine-32bit. (bsc#1218640) ==== mutter ==== Version update (45.2 -> 45.3) Subpackages: mutter-lang - Update to version 45.3: + Fix handling of relative mode for tablets. + Fix forcing EGLStream with NVIDIA proprietary driver. + Sync geometry only when window is mapped. + Improve repick due to transform changes. + wayland/client: Add make_desktop() method. + Fix occasional artifacts at top of X11 fullscreen windows. + background: Fix background color around image. + Fixed crashes. + Plugged leaks. + Misc. bug fixes and cleanups. + Updated translations. ==== nodejs21 ==== Version update (21.4.0 -> 21.5.0) Subpackages: npm21 - Update to 21.5.0: * module: merge config with package_json_reader * src: move package resolver to c++ * doc: + deprecate hash constructor + deprecate dirent.path - linker_lto_jobs.patch: refreshed ==== publicsuffix ==== Version update (20231213 -> 20240107) - Update to version 20240107: * Remove homeoffice.gov.uk (#1909) * util: gTLD data autopull updates for 2024-01-06T15:12:04 UTC (#1918) ==== redis ==== Version update (7.2.3 -> 7.2.4) - redis 7.2.4: (boo#1218646) - Security fixes - (CVE-2023-41056) In some cases, Redis may incorrectly handle resizing of memory buffers which can result in incorrect accounting of buffer sizes and lead to heap overflow and potential remote code execution. - Bug fixes - Fix crashes of cluster commands clusters with mixed versions of 7.0 and 7.2 (#12805, #12832) - Fix slot ownership not being properly handled when deleting a slot from a node (#12564) - Fix atomicity issues with the RedisModuleEvent_Key module API event (#12733) ==== sg3_utils ==== Version update (1.48+6.7f43e14 -> 1.48+7.63e63cb) Subpackages: libsgutils2-1_48-2 - Fix spurious warning for non-SCSI devices (boo#1218666) ==== transmission ==== Version update (4.0.4 -> 4.0.5) Subpackages: transmission-common transmission-gtk transmission-gtk-lang - Update to version 4.0.5: + Fixed 4.0.0 bug where the IP address field in UDP announces were not encoded in network byte order. + Fixed a bug that incorrectly escaped JSON strings in some locales. + Fixed 4.0.4 decreased download speeds for people who set a low upload bandwidth limit. + Fixed bug that prevented editing trackers on magnet links. + Fixed HTTP tracker announces and scrapes sometimes failing after adding a torrent file by HTTPS URL. + In RPC responses, change the default sort order of torrents to match Transmission 3.00. + Fixed tr_sys_path_copy() behavior on some Synology Devices. + Fix: only append .added suffix to watchdir files. + Fixed crash when opening torrent file from "Recently used" section in GTK 4. ==== yast2-packager ==== Version update (5.0.1 -> 5.0.2) - After installation disable the empty installation repository from the SLE15 Online medium (bsc#1182303) - 5.0.2

9 9

openSUSE Release Engineering meeting 13.03.2024
by Lubos Kocman 07 Aug '24

07 Aug '24

!!! HEADS UP WE ARE BACK USING JITSI !!! https://meet.opensuse.org/ReleaseEngineeringMeeting How to join the meeting? https://calendar.opensuse.org/teams/release/events/opensuse_release_enginee… All meeting minutes can be found here: https://etherpad.opensuse.org/p/ReleaseEngineering-meeting ## Attendees ana,guillaumeg, DimStar, lkocman, DocB, bmwiedemann,maxlin ## Leap Leap 15.6 Beta build Build630.1 bringing fix to Virtualbox was published yesterday in the evening. Publishing seem to be stuck as the data is not available on download-o-o . I did raise it with autobuild (#team-dist) aarch64 has an issue with running firefox with <= 4GB of memory. In comparison chromium seems to work with 2GB. This is a problems ince our minimal requirements for GNOME states 3GB https://bugzilla.opensuse.org/show_bug.cgi?id=1221314 Leap 15.6 Beta known issues page https://en.opensuse.org/openSUSE:Known_bugs_15.6# How do we see that submissions to SUSE:SLE-15-SP6:GA got accepted? The sync state doesn't work, easiest is to check particular package in SUSE:SLE-15-SP6:GA in OBS. Ongoing Plasma 5.27.1 update https://code.opensuse.org/leap/features/issue/154 based on Feedback from openSUSE Leap future strategy discussion with Rick Spencer on Friday in Prague. Leap 15.6 appliances are currently blocked at https://bugzilla.suse.com/show_bug.cgi?id=1213595 All openQA runs with 15.5 and 15.6 isos booted off USB fail: https://openqa.opensuse.org/tests/3992142#step/finish_desktop/2 It is visible that udev prefers the by-label link to sda instead of sda1 for some reason, even though https://bugzilla.suse.com/show_bug.cgi?id=1213185 implies that the fix for https://github.com/systemd/systemd/issues/28468 got backported. ## openSUSE Tumbleweed (DimStar) openSUSE:Factory build fail stats: 136 failed 47 unresolvable (last week 139 failed, 33 unresolvable) https://tinyurl.com/ysy4nnnz => Around ~80 are python packages that are still failing to build with Python 3.12 Most relevant updates: * Linux Kernel Longterm 6.6.21 * libpng 1.6.43 * poppler 24.03.0 * procps 14.5+0 * wine 9.4 * buildah 1.35.0 * MozillaFirefox 123.0.1 * libreoffice 24.2.1.2, * update openSUSE-build-key (new suse container key!) * KDE Frameworks and Plasma 6 + KDE Gear 24.02.0 (QA in progress for snapshot 0311) Max: asking about Plasma 5 parallel availability in TW. Plasma 6 obsoletes Plasma 5, so most were already deleted. Updates waiting / work still in progress: * kernel-source 6.7.9, to be accepted later today * systemd 255.3 ( SR#1152118), needs updated "build" package and fixed transactional-updates, this is blocking rpmlint Dominique: Adrian any update on the -build package for systemd-255.3? Adrian: releasing it as maintenance update will take some time. You'll get it in next minutes for Factory. * Still handle all issues for the new KDE fw + plasma * GCC 14: second phase ongoing, use gcc14 as the default compiler (Staging:Gcc7) * RPM 4.19.1.1 + 4.20 * RPM 4.19.1.1 (user/group dependencies), Packages not included in rings getting updates, still some more to go, see https://lists.opensuse.org/archives/list/factory@lists.opensuse.org/thread/… * Preparations for RPM 4.20, %patchN won't be supported anymore, see https://lists.opensuse.org/archives/list/factory@lists.opensuse.org/thread/… * Python 3.12+removal of 3.9 modules: Not all modules fixed to build with Python 3.12, removal of python 3.9 modules blocked by build failures. Python3.9 interpreter would stay for some time more. * go1.22 as default go version, blocked on i586 with packages which export CGO_ENABLED=0 and go build -buildmode pie https://github.com/golang/go/issues/64875 (needs to update ~70 packages) * autoconf 2.72, waiting libreoffice; fixed in version 24.2.2 in devel prj (unstable tree) * llvm 18, some packages FTBFS * shadow 4.15.0, openQA tests failing * libxml 2.12.1, on hold, no progress * dbus-broker as default dbus session manager, now everything builds, two openQA checks failing. Bernhard started to detect+fix/report issues with many packages that mis-use %check 1155606 exiv2 1155640 python-pypuppetdb 1156899 med-tools 1157116 rsync 1157126 gnome-disk-utility 1157141 xsimd 1157313 kosmindoormap 1157317 itinerary 1157315 plasma6-disks https://bugzilla.opensuse.org/show_bug.cgi?id=1221321 pspp FTBFS-nocheck ## Richard (Aeon+botmaster) ## Max Leap 15.6 - build stats in Backports: 68 faild(was 79), 22 unresolvable(was 24) * Debugging the uninstallable error from installcheck result * Go through build fails in Backports * Upcoming package change needed but are pending in SLE15 SP6 staging: polkit-default-privs and SDL2_image ## Guillaume - Arm * Tumbleweed: - Blocked by KDE live ISO being too large - Problem with buildah found by openQA - https://bugzilla.opensuse.org/show_bug.cgi?id=1221243 - WIP: Still some packages built without PAC/BTI, two main reasons: * assembler files without PAC/BTI (usually reported upstream, e.g. openssl, gnutls, etc) * Packages built without distro flags (usually fixed in spec file) * TW installer issues with PAC/BTI - https://bugzilla.suse.com/show_bug.cgi?id=1219717 - Unable to reproduce anymore on a different host, while openQA still fails. - rpmlint: https://rpmlint.opensuse.org/ * we noticed that rpmlint does not check anymore for packages built without distro %{optflags}. We should add it back. https://bugzilla.opensuse.org/show_bug.cgi?id=1217840 Doug: rpmlint GSOC topic. Neal will be helping to mentor that. https://github.com/openSUSE/mentoring/issues/204 * Leap 15.6/Backports SP6: - No update ## Sarah - s390x Not available * Second mainframe is up and running -> Many builds are running at the moment (also gcc) and the manframe is not really stable -> waiting for a new Tumbleweed release * gcc bug (2021) reactivated related to memory optimization on the mainframe: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101523 * related openSUSE Bug (not really informative): https://bugzilla.opensuse.org/show_bug.cgi?id=1188441 GPG keys for s390x, PPCle and RISC-V expired in openSUSE-build-key: https://bugzilla.suse.com/show_bug.cgi?id=1220993 ## Doug Not available * bugzilla.opensuse.org * Submitted Bug 1220916 * Asked to delete - If you experience any difficulties or find any issues, please, report to SUSE Bugzilla Team (email) * Contribution Workshops * More sign ups at https://etherpad.opensuse.org/p/openSUSE-Contribution-Workshop * Episode 3 - Bumping "Packaging Guidelines" to a later date and will have a learning "how to report bugs" video * Episode 4 - Language-specific packaging - Rust and Go provided link. Will come in March * Published SD Boot Utils article * Leap 15.6 beta article ready for publication on Thursday at 7 p.m. We should do a little prequel for BugDay/LiveEvent (like a little tweet or similar today). To increase attendance of the event. * GSoC * Sent report to Project Manager * Started seperate workspace on slack for mentees and mentors - https://join.slack.com/t/opensuse-group/shared_invite/zt-2dwsqm6nb-iNJifnVb… * Community Summit * 8 Registrations, 5 Submissions, 2 Hours (pre-announcement) * openSUSE Conference * 48 Registrations, 27 Submissions, 16 Hours (5 Open 4 Business Submissions) ** I won't be available next weeks Static * oSC24 dates June 27 to 29 reserved (Thursday - Saturday) * Open 4 Business June 26 between 2 - 6 p.m. at Franken Campus * AI topics (static) ## Dirk Not available ## Wolfgang (Package Hub), Scott Bahling lkocman: Not available Customer request for Re-addition of rsh to Leap 15.5 / 15.6 and related Package Hub modules for SLES 15 SP5/SP6. ## Maintenance team (Marcus or Maurizio (m4u)) Not avialable expired repodata warning for http://download.opensuse.org/update/leap/15.6/backports/ http://download.opensuse.org/update/leap/15.6/non-oss/ This was mentioned as part of https://bugzilla.suse.com/show_bug.cgi?id=1220993 Struggling with chromium update. Maintainers are not currently able to update it to the current version. No transition method for expired keys. Temporarily disabling the key in libcontainer policy (Marcus please correct me). The goal is to have the least disruptive method for it. Dominique: the new key seems to raise some issues - transition needs to be figured out. Marcus: I did check podman documentation and am looking if we can have temporarily two keys in parallel. Marcus: will we resign all the images on the registry or only new ones? Dominique: for rpm we usually accept both old and new key for about a half a year. lkocman: Leap Micro 6.X update channel setup will have to be done soon (within a few weeks). ## Adrian - OBS No update lkocman: we need to cleanup accepted / rejected requests in SUSE:SLE-15-SP6:GA in OBS. lkocman doesn't have permissions to do so in OBS. Workaround would be to re-add/reject suse-sle-reviewers review. Lubos will write to autobuild + add Marco to the first line. ## Simon (Leap Replacement/Linarite) Not available ## Bernhard Slowroll * https://openqa.opensuse.org/group_overview/120 has regular runs now * kernel-longterm 6.6.21 from Factory * kernel-default follows Factory * OBS has a Slowroll distribution target, so it is easy to add in devel projects * https://www.reddit.com/r/openSUSE_Slowroll/ gets some activity ## Open Floor

2 1

mkosi-initrd: initial enablement for Tumbleweed
by Antonio Feijoo 02 Aug '24

02 Aug '24

Hi! For those of you who want to experiment with an alternative initrd generator, I've prepared the initial enablement of mkosi-initrd for Tumbleweed. Why is it interesting and different from other initrd generators? Mainly, because it builds the initrd from distro packages instead of picking everything from your local host. Analysis and instructions: https://en.opensuse.org/Mkosi-initrd *A big warning here*: this is just a proof of concept, an incomplete initrd can break the system boot, so always keep a copy of a working image. Feedback is appreciated. Have fun! -- Antonio Álvarez Feijoo System Boot and Init SUSE

2 1

New Tumbleweed snapshot 20240730 released!
by Dominique Leuenberger 31 Jul '24

31 Jul '24

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: NetworkManager apparmor (4.0.1 -> 4.0.2) b43-fwcutter clamav colord curl (8.8.0 -> 8.9.0) ffmpeg-4 ffmpeg-6 fprintd (1.94.2 -> 1.94.3) fwupd (1.9.21 -> 1.9.22) kernel-source (6.9.9 -> 6.10.2) libapparmor (4.0.1 -> 4.0.2) linux-glibc-devel (6.9 -> 6.10) mariadb-connector-c openSUSE-release (20240726 -> 20240730) openblas_openmp openblas_pthreads pciutils python-kiwi (10.0.25 -> 10.0.27) rubygem-nokogiri (1.15.5 -> 1.16.6) rubygem-ruby-augeas selinux-policy (20240715 -> 20240726) supermin systemd (255.8 -> 256.4) taglib (2.0 -> 2.0.1) virt-manager wtmpdb (0.12.0+git.20240508 -> 0.13.0+git.20240726) yast2 (5.0.8 -> 5.0.9) === Details === ==== NetworkManager ==== Subpackages: NetworkManager-bluetooth NetworkManager-lang NetworkManager-tui NetworkManager-wwan libnm0 typelib-1_0-NM-1_0 - Add NetworkManager-dont-renew-bridge-dhcp-if-no-mac-on-wakeup.patch: manager: don't renew dhcp lease when software devices' MAC is empty (bsc#1225498, glfd#NetworkManager/NetworkManager#1587). ==== apparmor ==== Version update (4.0.1 -> 4.0.2) Subpackages: apparmor-abstractions apparmor-docs apparmor-parser apparmor-parser-lang apparmor-profiles apparmor-utils apparmor-utils-lang python3-apparmor - update to AppArmor 4.0.2 - bugfix release with lots of fixes in all areas - add new userns profiles for balena-etcher, chromium and wike - see https://gitlab.com/apparmor/apparmor/-/wikis/Release_Notes_4.0.2 for the detailed upstream changelog - drop upstream(ed) patches: - aa-remove-unknown-fix-unconfined.diff - logprof-mount-empty-source.diff - plasmashell.diff - sampa-rpcd-witness.diff - sddm-xauth.diff - teardown-unconfined.diff - test-aa-notify.diff - tools-fix-redefinition.diff - utils-relax-mount-rules-2.diff - utils-relax-mount-rules.diff - refresh GPG key (was expired) ==== b43-fwcutter ==== - Provide fallback in case %_firmwaredir is not defined ==== clamav ==== Subpackages: libclamav12 libclammspack0 libfreshclam3 - Add upstream 1305.patch to fix tests (boo#1102840, https://github.com/Cisco-Talos/clamav/issues/1300) ==== colord ==== Subpackages: colord-color-profiles colord-lang libcolord2 libcolorhug2 - Build -D_FILE_OFFSET_BITS=64 and -D_TIME_BITS=64 in order to avoid wrong type being passed to gmtime_r on i586 (and perhaps other 32bit targets). [boo#1228331] ==== curl ==== Version update (8.8.0 -> 8.9.0) Subpackages: curl-zsh-completion libcurl4 - Update to 8.9.0: * Security fixes: - [bsc#1227888, CVE-2024-6197] curl: freeing stack buffer in utf8asn1str - [bsc#1228260, CVE-2024-6874] idn: tweak buffer use when converting with macidn * Changes: - curl: add --ip-tos (IP Type of Service / Traffic Class) - curl: add --mptcp - curl: add --vlan-priority - curl: add -w '%{num_retries} - gnutls: support CA caching - mbedtls: support CURLOPT_CERTINFO - noproxy: patterns need to be comma separated - socket: support binding to interface *AND* IP - tcpkeepalive: add CURLOPT_TCP_KEEPCNT and --keepalive-cnt - urlapi: add CURLU_NO_GUESS_SCHEME - wolfssl: support CA caching * Bugfixes: - connection: shutdown TLS (for FTP) better - curl-config: revert to backticks to support old target envs - curl: allow etag and content-disposition for 3xx reply - curl: bsearch the --write-out variable name - curl: check for --disable case *sensitively* - doh: fix leak and zero-length HTTPS RR crash - file: separate fake headers and body with a stand-alone CRLF - ftp: remove redundant null pointer check in loop condition - gnutls: improve TLS shutdown - gnutls: pass in SNI name, not hostname when checking cert - hostip: skip error check for infallible function call - http/3: add shutdown support - http/3: resume upload on ack if we have more data to send - lib: add a few DEBUGASSERT(data) to aid code analyzers - lib: add failure reason on bind errors - lib: graceful connection shutdown - lib: xfer_setup and non-blocking shutdown - multi: add multi->proto_hash, a key-value store for protocol data - multi: do a final progress update on connect failure - multi: fix multi_wait() timeout handling - multi: fix pollset during RESOLVING phase - ngtcp2+quictls: fix cert-status use - noproxy: test bad ipv6 net size first - openssl/gnutls: rectify the TLS version checks for QUIC - openssl: fix hostname handling when using ECH - openssl: stop duplicate ssl key logging for legacy OpenSSL - quic: enable UDP GRO - quic: openssl quic, cmake and doc version update to 3.3.0 - quic: require at least OpenSSL 3.3 for QUIC - quic: update to quiche 0.22.0 - smtp: for starttls, do full upgrade - tool_operate: avoid explicitly setting verifypeer to 1 - tool_writeout: get certinfo only when needing it - transfer: avoid polling socket every transfer loop - transfer: conn close on paused upload - transfer: do not use EXPIRE_NOW while blocked - transfer: remove curl_upload_refill_watermark, no longer used - transfer: set CSELECT_IN if there is data pending - url: allow DoH transfers to override max connection limit - x509asn1: add some common ECDSA OIDs - x509asn1: ASN1tostr() should fail when 'constructed' is set - x509asn1: fallback to dotted OID representation - x509asn1: prevent NULL dereference - x509asn1: remove superfluous free() - x509asn1: remove two static variables * Rebase libcurl-ocloexec.patch * Remove curl-make-install-curl-config.patch upstream ==== ffmpeg-4 ==== Subpackages: libavcodec58_134 libavformat58_76 libavutil56_70 libpostproc55_9 libswresample3_9 libswscale5_9 - Add ffmpeg-c99.patch so that the package conforms to the C99 standard and builds on i586 with GCC 14. ==== ffmpeg-6 ==== Subpackages: libavcodec60 libavfilter9 libavformat60 libavutil58 libpostproc57 libswresample4 libswscale7 - Add ffmpeg-c99.patch so that the package conforms to the C99 standard and builds on i586 with GCC 14. - Add ffmpeg-6-CVE-2024-32230.patch: Backporting 96449cfe from upstream, Fix 1 line and one column images. (CVE-2024-32230 bsc#1227296) - Add ffmpeg-6-CVE-2024-32228.patch: Backporting 45964876 from upstream, Fix segfault on invalid film grain metadata. (CVE-2024-32228, bsc#1227277) - Add ffmpeg-6-CVE-2024-32228-shim-5d7f234e.patch: Backporting 5d7f234e from upstream, document that there can be multiple complex filtergraphs to prepare dependence code for CVE-2024-32228. (CVE-2024-32228, bsc#1227277) - Add ffmpeg-6-CVE-2024-32228-shim-f50382cb.patch: Backporting f50382cb from upstream, implement AFGS1 parsing. to prepare dependence code for CVE-2024-32228. (CVE-2024-32228, bsc#1227277) - Add ffmpeg-6-CVE-2024-32228-shim-1535d338.patch: Backporting 1535d338 from upstream, add AOM film grain synthesis, to prepare dependence code for CVE-2024-32228. (CVE-2024-32228, bsc#1227277) ==== fprintd ==== Version update (1.94.2 -> 1.94.3) Subpackages: fprintd-lang fprintd-pam - update to 1.94.3: * Don't try to clear storage on devices without internal storage * Build: Add option to use libelogind for DBus * Fixed loading external storage modules * Do not require bash to build (just posix sh) * Tests fixes for newer python, python-dbusmock and libfprint * Even more translation updates ==== fwupd ==== Version update (1.9.21 -> 1.9.22) Subpackages: fwupd-bash-completion fwupd-lang libfwupd2 typelib-1_0-Fwupd-2_0 - Update to version 1.9.22: + This release fixes the following bugs: - Add a PCB tag in the usi-dock GUID to distinguish different revisions. - Add explicit hidraw permission to fwupd.service to fix several devices. - Always load the flashrom plugin when using coreboot. - Be explicit with the rts54hub detach retry delay to fix the Acer D501. - Be more careful when setting thelio-io version strings. - Fix a critical warning if a device returns unexpected data from DFU upload. - Fix a critical warning if the DMI manufacturer is an empty string. - Fix several reported integer overflows from Coverity. - Fix the Blackbird and Talos II baseboard details. - Fix transient version number issue after flashing wacom-usb devices. - Increase the cros_ec acquiesce delay to manage additional reboots. - Only accept valid ASCII cabinet filenames. - Only require udevdir when gudev support is enabled. - Only show one PixArt receiver device per physical device. - Set the rts54hub version in more cases. - Speed up the daemon self tests by ~60%. - Use the bootloader build-timestamp as the fallback HWID BIOS version. + This release adds support for the following hardware: - Framework SD - Raspberry Pi 5 (unofficial) ==== kernel-source ==== Version update (6.9.9 -> 6.10.2) - Update patches.suse/drm-qxl-Pin-buffer-objects-for-internal-mappings.patch (bsc#1228387). Fix the bsc #. - commit 65a34e2 - drm/qxl: Pin buffer objects for internal mappings (bsc#1228388). - commit 691f036 - Linux 6.10.2 (bsc#1012628). - tap: add missing verification for short frame (bsc#1012628). - tun: add missing verification for short frame (bsc#1012628). - filelock: Fix fcntl/close race recovery compat path (bsc#1012628). - ALSA: seq: ump: Skip useless ports for static blocks (bsc#1012628). - ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused (bsc#1012628). - arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB (bsc#1012628). - arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB (bsc#1012628). - arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB (bsc#1012628). - arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB (bsc#1012628). - arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB (bsc#1012628). - arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB (bsc#1012628). - arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB (bsc#1012628). - arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB (bsc#1012628). - arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators (bsc#1012628). - arm64: dts: qcom: x1e80100-qcp: Fix the PHY regulator for PCIe 6a (bsc#1012628). - arm64: dts: qcom: x1e80100-crd: Fix the PHY regulator for PCIe 6a (bsc#1012628). - arm64: dts: qcom: qrb4210-rb2: switch I2C2 to i2c-gpio (bsc#1012628). - arm64: dts: qcom: qrb2210-rb1: switch I2C2 to i2c-gpio (bsc#1012628). - arm64: dts: qcom: x1e80100-qcp: Fix USB PHYs regulators (bsc#1012628). - arm64: dts: qcom: sc7280: Disable SuperSpeed instances in park mode (bsc#1012628). - arm64: dts: qcom: sc7180: Disable SuperSpeed instances in park mode (bsc#1012628). - ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360 (bsc#1012628). - ALSA: hda/realtek: Enable headset mic on Positivo SU C1400 (bsc#1012628). - ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop (bsc#1012628). - usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup (bsc#1012628). - fs/ntfs3: Validate ff offset (bsc#1012628). - fs/ntfs3: Add a check for attr_names and oatbl (bsc#1012628). - jfs: don't walk off the end of ealist (bsc#1012628). - ocfs2: add bounds checking to ocfs2_check_dir_entry() (bsc#1012628). - s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception() (bsc#1012628). - drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq() (bsc#1012628). - commit d3b5079 - Revert "rpm/kernel-obs-build.spec.in: drop algif_hash from KERNEL_MODULES (bsc#1226463)" This reverts commit c9c2e244cf9031882276be043b882ccf33835a4f. Openssl was fixed: https://build.opensuse.org/request/show/1189541 - commit 178f0b6 - drm/amd/display: Take Synaptics Cascaded Topology into Account (bsc#1228093 #3495). - commit a4c3703 - Linux 6.10.1 (bsc#1012628). - thermal: core: Allow thermal zones to tell the core to ignore them (bsc#1012628). - io_uring: fix error pbuf checking (bsc#1012628). - ASoC: cs35l56: Limit Speaker Volume to +12dB maximum (bsc#1012628). - ASoC: cs35l56: Use header defines for Speaker Volume control definition (bsc#1012628). - tpm: Use auth only after NULL check in tpm_buf_check_hmac_response() (bsc#1012628). - cifs: Fix setting of zero_point after DIO write (bsc#1012628). - cifs: Fix server re-repick on subrequest retry (bsc#1012628). - cifs: fix noisy message on copy_file_range (bsc#1012628). - cifs: Fix missing fscache invalidation (bsc#1012628). - cifs: Fix missing error code set (bsc#1012628). - ext4: use memtostr_pad() for s_volume_name (bsc#1012628). - commit a57275a - Revert "drm/amd/display: FEC overhead should be checked once for mst slot nums" (bsc#1228093 #3495). - commit cee765e - update to 6.10 final - refresh configs (headers only) - commit b8b0277 ==== libapparmor ==== Version update (4.0.1 -> 4.0.2) - update to AppArmor 4.0.2 - bugfix release with lots of fixes in all areas - add new userns profiles for balena-etcher, chromium and wike - see https://gitlab.com/apparmor/apparmor/-/wikis/Release_Notes_4.0.2 for the detailed upstream changelog - drop upstream(ed) patches: - aa-remove-unknown-fix-unconfined.diff - logprof-mount-empty-source.diff - plasmashell.diff - sampa-rpcd-witness.diff - sddm-xauth.diff - teardown-unconfined.diff - test-aa-notify.diff - tools-fix-redefinition.diff - utils-relax-mount-rules-2.diff - utils-relax-mount-rules.diff - refresh GPG key (was expired) ==== linux-glibc-devel ==== Version update (6.9 -> 6.10) - Update to kernel headers 6.10 ==== mariadb-connector-c ==== - Explicitly enable zstd support (new curl brings it in, and we want to ensure it to not be random): + Add pkgconfig(libzstd) BuildRequires: allow cmake to detect it. ==== openSUSE-release ==== Version update (20240726 -> 20240730) Subpackages: openSUSE-release-appliance-custom openSUSE-release-dvd - automatically generated by openSUSE-release-tools/pkglistgen ==== openblas_openmp ==== - Make sure the minimum CPU requirement set in the pkgconfig file is the same one as used for building. This also helps to maintain a reproducible build (boo#1228177). ==== openblas_pthreads ==== - Make sure the minimum CPU requirement set in the pkgconfig file is the same one as used for building. This also helps to maintain a reproducible build (boo#1228177). ==== pciutils ==== Subpackages: libpci3 - Synchronize SLE-15 and openSUSE:Factory [PED-8393, bsc#1224138]. The following patches are now obsolete in version 3.13.0: * lspci-Fixed-buffer-overflows-in-ls-tree.c.patch * pciutils-Add-PCIe-5.0-data-rate-32-GT-s-support.patch * pciutils-Add-PCIe-6.0-data-rate-64-GT-s-support.patch * pciutils-Add-decoding-of-vendor-specific-VPD-fields.patch * pciutils-VPD-Cleanup.patch * pciutils-VPD-When-printing-item-IDs-escape-non-ASCII-characte.patch ==== python-kiwi ==== Version update (10.0.25 -> 10.0.27) - Bump version: 10.0.26 â 10.0.27 - Fix dracut-interactive with systemd 256 With systemd 256, /usr (and thus also /bin/) is read-only in the initrd. Move dracut-interactive and its .service into /run instead. - Bump version: 10.0.25 â 10.0.26 - Revise scripts_testing.rst - Revise schema_extensions.rst - Pass kernel cmdline to agama In the agama integration test make sure to pass along the kernel boot parameters to allow controlling the behavior of agama better - Add <file> directive to incorporate custom files Usually custom files are managed by placing them as overlay files or archives. However, overlay files must be structured inside of a root/ subdirectory and archive files are binary data. It is therefore not straight forward to just reference one or more files as source files to the image description to be placed into the image. This commit adds a new <file> element which allows to do this. This Fixes #1953 ==== rubygem-nokogiri ==== Version update (1.15.5 -> 1.16.6) - 1.16.6: - update intree libxml2 copy (unused in our build) - update intree zlib copy (unused in our build) - [CRuby] `XML::Reader` sets the `@encoding` instance variable during reading if it is not passed into the initializer. Previously, it would remain `nil`. The behavior of `Reader#encoding` has not changed. This works around changes to how libxml2 reports the encoding used in v2.12.6. - [CRuby] `XML::Reader` defaults the encoding to UTF-8 if it's not specified in either the document or as a method parameter. Previously non-ASCII characters were serialized as NCRs in this case. [#2891] (@flavorjones) - [CRuby] Restored support for compilation by GCC versions earlier than 4.6, which was broken in v1.15.0 (540e9aee). [#3090] (@adfoster-r7) - [CRuby] Patched upstream libxml2 to allow parsing HTML5 in the context of a namespaced node (e.g., foreign content like MathML). [#3112, #3116] (@flavorjones) - [CRuby] Fixed a small memory leak in libgumbo (HTML5 parser) when the maximum tree depth limit is hit. [#3098, #3100] (@stevecheckoway) - Drop gcc14-allow-incompatible-pointer-types-for-now.patch - Added gcc14-allow-incompatible-pointer-types-for-now.patch: gcc 14 errors out on incompatible pointer types Allow those until https://github.com/sparklemotion/nokogiri/issues/3295 is fixed - Added only-complain-about-version-diff-if-it-is-older.patch boo#1202053 boo#1213999 boo#1203728 - limit ruby versions to 3.x - 1.16.0: This release introduces native gem support for Ruby 3.3. This release ends support for Ruby 2.7, for which [upstream support ended 2023-03-31](https://www.ruby-lang.org/en/downloads/branches/). [#]### Pattern matching This version marks _official support_ for the pattern matching API in `XML::Attr`, `XML::Document`, `XML::DocumentFragment`, `XML::Namespace`, `XML::Node`, and `XML::NodeSet` (and their subclasses), originally introduced as an experimental feature in v1.14.0. (@flavorjones) Documentation on what can be matched: * [`XML::Attr#deconstruct_keys`](https://nokogiri.org/rdoc/Nokogiri/XML/Attr.html?h=deconstruct#method-i-deconstruct_keys) * [`XML::Document#deconstruct_keys`](https://nokogiri.org/rdoc/Nokogiri/XML/Document.html?h=deconstruct#method-i-deconstruct_keys) * [`XML::Namespace#deconstruct_keys`](https://nokogiri.org/rdoc/Nokogiri/XML/Namespace.html?h=deconstruct+namespace#method-i-deconstruct_keys) * [`XML::Node#deconstruct_keys`](https://nokogiri.org/rdoc/Nokogiri/XML/Node.html?h=deconstruct#method-i-deconstruct_keys) * [`XML::DocumentFragment#deconstruct`](https://nokogiri.org/rdoc/Nokogiri/XML/DocumentFragment.html?h=deconstruct#method-i-deconstruct) * [`XML::NodeSet#deconstruct`](https://nokogiri.org/rdoc/Nokogiri/XML/NodeSet.html?h=deconstruct#method-i-deconstruct) [#]## Dependencies * [CRuby] Vendored libxml2 is updated to v2.12.3 from v2.11.6. (@flavorjones) * https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.0 * https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.1 * https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.2 * https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.3 [#]## Fixed * CSS `nth` pseudo-classes now handle spaces, e.g. `"2n + 1"`. [#3018] (@fusion2004) * [CRuby] `libgumbo` no longer leaks memory when an incomplete tag is abandoned by the HTML5 parser. [#3036] (@flavorjones) [#]## Removed * Removed `Nokogiri::HTML5.get` which was deprecated in v1.12.0. [#2278] (@flavorjones) * Removed the CSS-to-XPath utility modules `XPathVisitorAlwaysUseBuiltins` and `XPathVisitorOptimallyUseBuiltins`, which were deprecated in v1.13.0 in favor of `XPathVisitor` constructor args. [#2403] (@flavorjones) * Removed `XML::Reader#attribute_nodes` which was deprecated in v1.13.8 in favor of `#attribute_hash`. [#2598, #2599] (@flavorjones) * [CRuby] Removed the `libxml/libxml2_path` key from `VersionInfo`, used in the past for third-party library integration, in favor of the `nokogiri/cppflags` and `nokogiri/ldflags` keys. Please note that third-party library integration is not fully supported and may be deprecated soon, see #2746 for more context. [#2143] (@flavorjones) ==== rubygem-ruby-augeas ==== - Modify patch to also apply with -p1 COPYING.patch - Add gcc14.patch dont enforce the check until upstream can fix the code ==== selinux-policy ==== Version update (20240715 -> 20240726) Subpackages: selinux-policy-targeted - Update to version 20240726: * Allow snapper grub plugin to manage unlabeled_t and read link files - Update to version 20240725: * Initial policy for grub2 snapper plugin (bsc#1228205) - Update to version 20240716: * Set microos autorelabel script to systemd_autorelabel_generator_t * Allow systemd_generator to write kmsg * Initial policy for systemd growpart-generator (bsc#1226824) ==== supermin ==== - bsc#1228373 - supermin regression in Tumbleweed / Factory causes virt-inspector to fail add-rpm-database-location.patch - Drop disable-test-if-newer-ext2.patch ==== systemd ==== Version update (255.8 -> 256.4) Subpackages: libsystemd0 libsystemd0-32bit libudev1 systemd-32bit systemd-container systemd-lang udev - Import commit 5bba1ebe17564b606cc5d1c07b14123c305019a7 (merge of v256.4) For a complete list of changes, visit: https://github.com/openSUSE/systemd/compare/bd8b5ee3cf0466b6b78e167967468cf… - Add 5004-disable-session-freeze.patch as a temporary workaround for https://github.com/systemd/systemd/issues/33083 - Add temporarily 5003-core-when-switching-root-remove-run-systemd-before-e.patch (bsc#1227580) - Don't mention any rpm macros inside comments, even if escaped (bsc#1228091) Otherwise pesign-obs-integration ends up re-packaging systemd with all macros inside comments unescaped leading to unpredictable behavior. Now why rpm expands rpm macros inside comments is the question... - Skip running the test units in %check for now. Some tests don't appreciate to run inside the build environment of OBS currently and some of them take an unexpected long time to execute on both risc and s390x architectures. - Make sure systemd-sysvcompat replaces systemd-sysvinit on upgrades (bsc#1218110) - Import commit bd8b5ee3cf0466b6b78e167967468cf6f93ec807 (merge of v256.2) For a complete list of changes, visit: https://github.com/openSUSE/systemd/compare/dd15bf4f6430d8646e546ee0b980448… - varlinkctl is no more considered as experimental and has been moved to the main package. - Upgrade to v256.1 (commit dd15bf4f6430d8646e546ee0b980448c7d0c9699) See https://github.com/openSUSE/systemd/blob/SUSE/v256/NEWS for details. - Added pam.systemd-run0 ==== taglib ==== Version update (2.0 -> 2.0.1) Subpackages: libtag2 libtag_c2 - update to 2.0.1: * Fix aborting when _GLIBCXX_ASSERTIONS are enabled. * Fall back to utf8cpp header detection in the case that its CMake configuration is removed. * Improve compatibility with the SWIG interface compiler. * Build system fixes for testing without bindings, Emscripten and Illumos. * C bindings: Fix setting UTF-8 encoded property values. * Windows: Fix opening long paths. ==== virt-manager ==== Subpackages: virt-install virt-manager-common - bsc#1228227 - libvirt missing default hyperv options causes windows guest performance degredation. virtinst-add-hyperv-performance-options.patch ==== wtmpdb ==== Version update (0.12.0+git.20240508 -> 0.13.0+git.20240726) Subpackages: libwtmpdb0 - Update to version 0.13.0+git.20240726: * Release version 0.13.0 * Fix variable overflow and check for it (#15) ==== yast2 ==== Version update (5.0.8 -> 5.0.9) Subpackages: yast2-logs - Re-added missing error class (bsc#1227580) - 5.0.9

3 2