August 2023

[opensuse-factory] reproducible builds status 2023-08
by Bernhard M. Wiedemann 30 Aug '23

30 Aug '23

Hi, Did some more nice debugging and patches this month The ghc workaround is still pending to bring another 220+ reproducible packages. https://github.com/opensuse-haskell/ghc-rpm-macros/pull/1 Java still has some way to go, but is improving upstream as well. 313 is probably the lowest percentage of build-compare-failed (very-unreproducible) packages we ever had. Here are the autogenerated bits: last month's status: https://lists.opensuse.org/archives/list/factory@lists.opensuse.org/… [View More]

3 3

20230809 wrong permissions error and unsure how to report the problem
by Joe Salmeri 30 Aug '23

30 Aug '23

Although I am reporting this after updating to 20230809, these wrong permissions messages have occurred for a long time ( years ) For TW 20230809 the message was /usr/bin/fusermount3: setting to root:trusted 4755 (wrong permissions 4750) I cannot remember doing a TW update where I didn't receive a message about wrong permissions similar to that one. The issue is that these messages are wrong. I have confirmed this multiple times. When I update my test system and see … [View More]

9 22

Phasing out ppc64 BE?
by Jiri Slaby 29 Aug '23

29 Aug '23

Hi, after the 6.5 build breakage on ppc64be (which is not hard to fix, but...), the SUSE kernel team was discussing if we can disable ppc64 _big-endian_ completely. This would save a lot of "power" as we don't think anyone can run/runs Tumbleweed on these processors/machines. Any opinions? If not, we will disable kernel builds around the mid of Sep. Disabling of the rest will likely follow. thanks, -- js suse labs

2 1

Packages in OBS not configured for Factory
by Roger Oberholtzer 28 Aug '23

28 Aug '23

I have a newbie question about the decision about what targets a package in OBS are built for. I mean about the logic behind the choice of which to enable. I quite often find that packages are enabled for only 15.2, or only Tumblwweed. But it is quite common that the packages are not enabled for all current openSUSE/SUSE releases. For exampl (not a complaints against this ptroject! I just happen to be following the status of the tensorflow2 and it took me here as a unresolvable package): … [View More]

6 14

openSUSE:Factory - Build fail notification
by DimStar / Dominique Leuenberger 26 Aug '23

26 Aug '23

Dear Package maintainers and hackers. Below package(s) in openSUSE:Factory have had problems for at least 4 weeks. We tried to send out notifications to the configured bugowner/maintainers of the package(s), but so far no fix has been submitted. This probably means that the maintainer/bugowner did not yet find the time to look into the matter and he/she would certainly appreciate help to get this sorted. - xreader: Fails to build Unless somebody is stepping up and submitting fixes, the … [View More]

1 0

All GTK programs take a long time to start since latest snapshot
by Michael Pujos 26 Aug '23

26 Aug '23

Hi, Here's a weird one. Since I upgraded to snapshot 20230823, on my system, if I try to start any program that uses GTK (Firefox, deadbeef, gedit, ...), program is stuck early on startup (way before any UI is displayed) timeouting on a poll() call that as a 25s timeout. I added my observations (with strace output) to an existing previous bug report that was for Firefox: https://bugzilla.opensuse.org/show_bug.cgi?id=1214043 https://old.reddit.com/r/openSUSE/comments/15jygg0/… [View More]

9 21

qt6, autoconf and lyx: help wanted
by Cor Blom 26 Aug '23

26 Aug '23

Hi all, I have a problem compiling lyx against qt6, both locally on my machine and in the buildservice. You can find the project here: https://build.opensuse.org/package/show/home:cornelisbb:lyx-unstable/lyx-qt6 I have asked the lyx devs for help, but they are baffled. It seems that qt6 on openSUSE behaves unexpected. It works find with cmake, though. (Yes, lyx supports both.) In the end I was asked to execute "qmake6 test.pro" (test.pro was a file they provided). It should provide a … [View More]

2 2

openSUSE:Factory - Build fail notification
by DimStar / Dominique Leuenberger 26 Aug '23

26 Aug '23

Dear Package maintainers and hackers. Below package(s) in openSUSE:Factory have had problems for at least 4 weeks. We tried to send out notifications to the configured bugowner/maintainers of the package(s), but so far no fix has been submitted. This probably means that the maintainer/bugowner did not yet find the time to look into the matter and he/she would certainly appreciate help to get this sorted. - motion: Fails to build - python-snuggs: Fails to build Unless somebody is stepping up … [View More]

2 1

new package: fsverity-utils
by David Disseldorp 25 Aug '23

25 Aug '23

Hi, fs-verity is a Linux kernel filesystem feature that does transparent on-demand verification of the contents of read-only files using Merkle trees. openSUSE Tumbleweed (ext4 + btrfs) and Leap (15.[45] ext4 only) ship with kernel support, but until now the corresponding user-space tools (fsverity-utils) have not been provided. These tools can be used to enable fs-verity on files, retrieve the digests of fs-verity files, and sign files for use with fs-verity (among other things). A devel … [View More]

1 0

known bug qemu 8.0.4-1.2 ?
by Simon Becherer 25 Aug '23

25 Aug '23

Hi, is there a known bug for: my "windows xp" (2 pices) running in qemu (host is opensuse tumbleweed 20230822 amd ryzen processor) will not start any more after updating to qemu 8.0.4-1.2 last tumbleweed installed was 20230102 everything was working. "suse 10" starts, and "windows 10" starts. now if i try to start windows xp in save mode i see some drivers where loaded, suddenly it stops (after windows/system32/drivers/Mup.sys) but i did not know if windows xp start now some ore this … [View More]

1 2

Tumbleweed - Review of the week 2023/34
by Dominique Leuenberger 25 Aug '23

25 Aug '23

Dear Tumbleweed users and hackers, As announced on various channels, OBS services have been moved to a new location on new hardware. So the last check-in we could do was on Wednesday, building, and QA done before the move yesterday and then publishing it. As we managed to get the timing pretty right (which was more based on luck than anything else; timings for build and QA are only very rough estimates) we managed to publish 6 snapshots since the last review. At the moment, we do not yet have … [View More]

1 0

New Tumbleweed snapshot 20230823 released!
by Dominique Leuenberger 24 Aug '23

24 Aug '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/… [View More]openSUSE:Submitting_bug_reports Packages changed: apache2-mod_php8 (8.2.8 -> 8.2.9) gnutls (3.8.0 -> 3.8.1) gpgme (1.21.0 -> 1.22.0) gpgmeqt (1.21.0 -> 1.22.0) libupnp (1.14.17 -> 1.14.18) mutter php8 (8.2.8 -> 8.2.9) python-pexpect xz yast2-apparmor (4.6.1 -> 4.6.2) === Details === ==== apache2-mod_php8 ==== Version update (8.2.8 -> 8.2.9) - version update to 8.2.9 * This is a security release. * Fixes CVE-2023-3824 [bsc#1214103] and CVE-2023-3823 [bsc#1214106] * https://www.php.net/ChangeLog-8.php#8.2.9 - deleted patches - php-unicode-allow-redistribution.patch (upstreamed) - deleted sources - repack.sh (not needed) ==== gnutls ==== Version update (3.8.0 -> 3.8.1) Subpackages: libgnutls-dane0 libgnutls30 libgnutls30-32bit - Fix missing GNUTLS_NO_EXTENSIONS compatibility. * Upstream: gitlab.com/gnutls/gnutls/commit/abfa8634 * Add gnutls-GNUTLS_NO_EXTENSIONS-compatibility.patch - tests: Fix the SRP test that fails with SIGPIPE signal return due to a socket being closed before using it. * Add gnutls-srp-test-SIGPIPE.patch - Update to version 3.8.1: * libgnutls: ClientHello extensions are randomized by default To make fingerprinting harder, TLS extensions in ClientHello messages are shuffled. As this behavior may cause compatibility issue with legacy applications that do not accept the last extension without payload, the behavior can be reverted with the %NO_SHUFFLE_EXTENSIONS priority keyword. * libgnutls: Add support for RFC 9258 external PSK importer. This enables to deploy the same PSK across multiple TLS versions (TLS 1.2 and TLS 1.3) in a secure manner. To use, the application needs to set up a callback that formats the PSK identity using gnutls_psk_format_imported_identity(). * libgnutls: %GNUTLS_NO_EXTENSIONS has been renamed to %GNUTLS_NO_DEFAULT_EXTENSIONS. * libgnutls: Add additional PBKDF limit checks in FIPS mode as defined in SP 800-132. Minimum salt length is 128 bits and minimum iterations bound is 1000 for PBKDF in FIPS mode. * libgnutls: Add a mechanism to control whether to enforce extended master secret (RFC 7627). FIPS 140-3 mandates the use of TLS session hash (extended master secret, EMS) in TLS 1.2. To enforce this, a new priority keyword %FORCE_SESSION_HASH is added and if it is set and EMS is not set, the peer aborts the connection. This behavior is the default in FIPS mode, though it can be overridden through the configuration file with the "tls-session-hash" option. In either case non-EMS PRF is reported as a non-approved operation through the FIPS service indicator. * New option --attime to specify current time. To make testing with different timestamp to the system easier, the tools doing certificate verification now provide a new option - -attime, which takes an arbitrary time. * API and ABI modifications: gnutls_psk_client_credentials_function3: New typedef gnutls_psk_server_credentials_function3: New typedef gnutls_psk_set_server_credentials_function3: New function gnutls_psk_set_client_credentials_function3: New function gnutls_psk_format_imported_identity: New function GNUTLS_PSK_KEY_EXT: New enum member of gnutls_psk_key_flags * Rebase patches: - gnutls-FIPS-140-3-references.patch - gnutls-FIPS-jitterentropy.patch * Remove patches merged/fixed upstream: - gnutls-FIPS-PCT-DH.patch - gnutls-FIPS-PCT-ECDH.patch ==== gpgme ==== Version update (1.21.0 -> 1.22.0) Subpackages: libgpgme11 libgpgmepp6 - Fix builds with qt and qt6 [T6673]: * qt,tests: Fix build in source directory. Include Qt binding sources before C++ binding sources and C sources. This fixes the problem that the debug.h in the C sources was found before the one in the Qt bindings. * build: Suggest out-of-source build. Suggest to run configure from a build subdirectory. * Add patches: - gpgme-qt-tests-Fix-build-in-source-directory.patch - gpgme-build-Suggest-out-of-source-build.patch - Update to 1.22.0: * Prevent wrong plaintext when verifying clearsigned signature. * Return bad data error instead of general error on unexpected data. * Take care of offline mode for all operations of gpgsm engine. * Prepare the use of the forthcoming libassuan version 3. * New configure option --with-libtool-modification. * cpp: Expose gpgme_decrypt_result_t.is_mime. * qt: Clean up after failure or cancel of sign/encrypt archive operation. * qt: Add setInputEncoding to QGpgMe::EncryptJob. * qt: Make toLogString helper public. * Interface changes relative to the 1.21.0 release: - qt: EncryptJob::setInputEncoding NEW. - qt: DecryptionResult::isMime NEW. - qt: toLogString NEW. ==== gpgmeqt ==== Version update (1.21.0 -> 1.22.0) - Fix builds with qt and qt6 [T6673]: * qt,tests: Fix build in source directory. Include Qt binding sources before C++ binding sources and C sources. This fixes the problem that the debug.h in the C sources was found before the one in the Qt bindings. * build: Suggest out-of-source build. Suggest to run configure from a build subdirectory. * Add patches: - gpgme-qt-tests-Fix-build-in-source-directory.patch - gpgme-build-Suggest-out-of-source-build.patch - Update to 1.22.0: * Prevent wrong plaintext when verifying clearsigned signature. * Return bad data error instead of general error on unexpected data. * Take care of offline mode for all operations of gpgsm engine. * Prepare the use of the forthcoming libassuan version 3. * New configure option --with-libtool-modification. * cpp: Expose gpgme_decrypt_result_t.is_mime. * qt: Clean up after failure or cancel of sign/encrypt archive operation. * qt: Add setInputEncoding to QGpgMe::EncryptJob. * qt: Make toLogString helper public. * Interface changes relative to the 1.21.0 release: - qt: EncryptJob::setInputEncoding NEW. - qt: DecryptionResult::isMime NEW. - qt: toLogString NEW. ==== libupnp ==== Version update (1.14.17 -> 1.14.18) Subpackages: libixml11 libupnp17 - Update to release 1.14.18 * miniserver: fix busy loop on socket error ==== mutter ==== Subpackages: mutter-lang - Add mutter-revert-window_draw_issues.patch: Revert commit 43cee4b6: Do clipped redraws when drawing offscreen (boo#1210744, glgo#GNOME/mutter#2771). ==== php8 ==== Version update (8.2.8 -> 8.2.9) Subpackages: php8-cli php8-ctype php8-dom php8-gd php8-gettext php8-iconv php8-mbstring php8-mysql php8-openssl php8-pdo php8-sqlite php8-tokenizer php8-xmlreader php8-xmlwriter - version update to 8.2.9 * This is a security release. * Fixes CVE-2023-3824 [bsc#1214103] and CVE-2023-3823 [bsc#1214106] * https://www.php.net/ChangeLog-8.php#8.2.9 - deleted patches - php-unicode-allow-redistribution.patch (upstreamed) - deleted sources - repack.sh (not needed) ==== python-pexpect ==== - add 31fab7b0edbe9b3401507b5dfa4db6aaf3fabca5.patch dae602d37493bae239e0e8db5b3dabafebfd59db.patch: python 3.12 compat ==== xz ==== Subpackages: liblzma5 liblzma5-32bit xz-lang - xznew: Remove bashsism. - build: pass CONFIG_SHELL=/bin/sh to configure: the posix tools are setting the current SHELL as the shebang, which is overkill: any posix compliant shell, aka /bin/sh, is sufficient. ==== yast2-apparmor ==== Version update (4.6.1 -> 4.6.2) - bsc#1214418 - Fixed crash on internal error when scanning audit.log - 4.6.2 [View Less]

1 0

Who maintains each RPM package?
by Mark Rubin 23 Aug '23

23 Aug '23

Is there a canonical, publicly-accessible database which maps openSUSE RPMs to the group/person/URL/email that maintains them? Specifically, I'd like to report or track the current problem with `jupyter` pulling in all of `python310*` (despite everything required being in `python311`), but more generally some other longstanding issues like `transfig` pulling in over 2000 `texlive-*` packages, or `mate-terminal` not getting its required `libmate-desktop`. (On the latter, yes, I know: "It's too … [View More]

7 8

Who maintains boxes at app.vagrantup.com ?
by Till Dörges 23 Aug '23

23 Aug '23

Hello all, not sure, whether this is the right place to ask. If not, please let me know. I was wondering who is in charge of these boxes https://app.vagrantup.com/opensuse ? Are these official openSUSE releases? IOW can I rely on them not containing any malicious code etc.? Thanks and regards -- Till -- Dipl.-Inform. Till Dörges doerges(a)pre-sense.de PRESENSE Technologies GmbH Nagelsweg 41, D-20097 HH Geschäftsführer/Managing Directors AG … [View More]

5 6

New Tumbleweed snapshot 20230822 released!
by Dominique Leuenberger 23 Aug '23

23 Aug '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/… [View More]openSUSE:Submitting_bug_reports Packages changed: bluez brltty (6.5 -> 6.6) gdb gtk4 javapackages-tools libreoffice (7.6.0.2 -> 7.6.0.3) luajit mutter patterns-base plasma5-workspace tracker-miners yast2-trans (84.87.20230811.13616e3be9 -> 84.87.20230818.ea489402e5) === Details === ==== bluez ==== Subpackages: bluez-auto-enable-devices bluez-cups bluez-zsh-completion libbluetooth3 - Use %_firmwaredir ==== brltty ==== Version update (6.5 -> 6.6) Subpackages: brltty-driver-at-spi2 brltty-driver-brlapi brltty-driver-speech-dispatcher brltty-driver-xwindow brltty-lang libbrlapi0_8 python3-brlapi system-user-brltty xbrlapi - Add e6707d5e.patch: brlapi: Fix python crash on connection error. Cython 3.0 started using the new Python object finalization APIs from PEP 442. - Update to version 6.6: + Too many changes; please read ChangeLog - Update api_version. - Rebase brltty-udev-dir.patch. ==== gdb ==== - Drop libdebuginfod1 BuildRequires/Recommends. The former isn't needed because there's a build requirement on libdebuginfod-devel already, which will pull the shared library. And the latter, because it's bogus since RPM auto generated dependency will take care of that requirement. ==== gtk4 ==== Subpackages: gtk4-lang gtk4-schema gtk4-tools libgtk-4-1 typelib-1_0-Gtk-4_0 - Add 6af9dc86.patch: print: Revert "Start sorting apart includes" change for gtkprinteroptionprivate.h. ==== javapackages-tools ==== Subpackages: javapackages-filesystem - Modified patch: * javapackages-6.1.0-maven-depmap.patch + try to make the list of aliases more reproducible ==== libreoffice ==== Version update (7.6.0.2 -> 7.6.0.3) Subpackages: libreoffice-base libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit - Update to 7.6.0.3 (official 7.6.0 release): https://wiki.documentfoundation.org/ReleaseNotes/7.6 https://wiki.documentfoundation.org/Releases/7.6.0/RC3 ==== luajit ==== - Update luajit-s390x.patch from gh#LuaJIT/LuaJIT#631 to the current form. ==== mutter ==== Subpackages: mutter-lang - Disable %autopatch on SLE which has not the macro ready. - Rebase mutter-SLE-bsc984738-grab-display.patch. - Drop mutter-Lower-HIDPI_LIMIT-to-144.patch (fate#326682, bsc#112546). The upstream has reworked the logic of scale factor selection based on actual screen size, see: https://gitlab.gnome.org/GNOME/mutter/-/commit/2f1dd049bfbbb60e0b3c2351e9ba… ==== patterns-base ==== Subpackages: patterns-base-apparmor patterns-base-base patterns-base-basesystem patterns-base-basic_desktop patterns-base-console patterns-base-enhanced_base patterns-base-minimal_base patterns-base-selinux patterns-base-sw_management patterns-base-transactional_base patterns-base-x11 patterns-base-x11_enhanced - move udev-configure-printer from enhanced_base to x11_enhanced Currently it pulls in Cups and Mesa dependencies the first is probably not really needed by default on servers and the second is certainly not desired there. Originally it was included for livecd's ==== plasma5-workspace ==== Subpackages: gmenudbusmenuproxy plasma5-session plasma5-session-wayland plasma5-workspace-lang plasma5-workspace-libs xembedsniproxy - Add patch to fix crash when opening windows (kde#473432) * 0001-TriangleMouseFilter-check-intercepted-item-still-exi.patch * 0002-TriangleMouseFilter-also-check-optional-position-has.patch ==== tracker-miners ==== Subpackages: tracker-miner-files tracker-miners-lang - Update + Fix the tracker miner spec file to build for SLE_15 + Rebase patch: tracker-miners-drop-syscalls-in-seccomp.patch ==== yast2-trans ==== Version update (84.87.20230811.13616e3be9 -> 84.87.20230818.ea489402e5) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sr yast2-trans-sv yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20230818.ea489402e5: * Translated using Weblate (Latvian) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) [View Less]

1 0

Blog post: news about Agama and ALP
by Ancor Gonzalez Sosa 23 Aug '23

23 Aug '23

After almost five months of radio silence, the YaST Team is back to blogging. Check the latest news about Agama (and how you can use it to install an early preview of ALP Dolomite) at https://yast.opensuse.org/blog/2023-08-21/agama3 Cheers. -- Ancor González Sosa YaST Team at SUSE Linux GmbH

2 1

[Leap] Why "Mesa", "Alsa" and "Cups" in Server Role (400 Mb)
by Walddys Emmanuel Dorrejo Céspedes 23 Aug '23

23 Aug '23

Hello, Today (17-Aug-23), was installing a Leap 15.5 Server Role, but cleaning unneeded packages, found that in Server Role the following packages a selected to be installed: Mesa (Dependency of Cups), Alsa, and Cups. - First, "Alsa" (Advanced Linux Sound Architecture), like the name, Alsa is used to manage the sound, but in server is something not needed Out-The-Box, it won't add anything to the system, except boot time, and unneeded services. - Second, "Cups" (The Common UNIX Printing … [View More]

4 12

Build Service cut over 2023-08-24 16:00 UTC
by Marco Strigl 22 Aug '23

22 Aug '23

Hi All, TL;DR: starting 2023-08-24 16:00 UTC the buildservice instances will be down for moving to a new data center. We will announce when they are back up. The long version: The migration to the new data center will start Thursday 2023-08-24 at 16:00 UTC with a shutdown of the all service. This will be followed by the sync of the remaining file changes to the new data center. On Friday morning we will start with bringing up services again. As soon as all services are up and running again … [View More]

2 1

[TW] Main repository ... is invalid
by Bob Williams 22 Aug '23

22 Aug '23

I have just tried to update my Tumbleweed system and run into the following problem: sudo zypper dup [sudo] password for root: Retrieving repository 'Main Repository (NON-OSS) (20230717)' metadata ..........................................................................................[error] Repository 'Main Repository (NON-OSS) (20230717)' is invalid. [Non-OSS|http://download.opensuse.org/history/20230717/tumbleweed/repo/non-o…] Valid metadata not found at specified URL History: - [Non-… [View More]

4 4

my snapshot was from aug 2, 2023 on armv7hl
by vani jindam 22 Aug '23

22 Aug '23

* today i tried zypper dist-upgrade * it didnt show any upgrades * from cat /etc/os-release_ VERSION_ID="20230802" PRETTY_NAME="openSUSE Tumbleweed" * zypper lr -u_ Repository priorities are without effect. All enabled repositories share the same priority. # | Alias | Name | Enabled | GPG Check | Refresh | URI --+-------------+----------------------------+---------+-----------+---------+----------------------------------------------------------------------- 1 | … [View More]

3 2

New Tumbleweed snapshot 20230821 released!
by Dominique Leuenberger 21 Aug '23

21 Aug '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/… [View More]openSUSE:Submitting_bug_reports Packages changed: emacs fcitx5-gtk (5.0.23 -> 5.1.0) giflib imlib2 (1.11.1 -> 1.12.0) kernel-firmware (20230731 -> 20230814) libfprint (1.94.5+tod1 -> 1.94.6+tod1) libxmlb (0.3.11 -> 0.3.13) lvm2 lvm2-device-mapper mokutil pam_mount (2.19 -> 2.20) pipewire procps rebootmgr (2.0 -> 2.1) rubygem-moneta (1.5.2 -> 1.6.0) sysvinit (3.07 -> 3.08) === Details === ==== emacs ==== Subpackages: emacs-el emacs-eln emacs-info emacs-nox emacs-x11 etags - Require bwrap at build time as some tools requires it if checks are enabled - Modify patch emacs-29.1.dif * Avoid in ispell.el unused lexical variable `load-dict' ==== fcitx5-gtk ==== Version update (5.0.23 -> 5.1.0) - update to 5.1.0 * add im module probing program * skip gtk im module probing for only plugin option * implement new PageButtonAlignment for gtk client side ui * gdk_layout is not happy with width or height 0 rect anymore ==== giflib ==== - Define make_build for distributions which do not define them in system macros ==== imlib2 ==== Version update (1.11.1 -> 1.12.0) Subpackages: imlib2-loaders libImlib2-1 - Update to 1.12.0: * test_load2: make error messages more descriptive * Y4M loader: fix support for 420 colorspaces * Y4M loader: add support for images with unexpected aspects * imlib2_view: Avoid potential use of uninitialized data * GIF loader: Enable showing animated images even if truncated * Introduce __imlib_perror() to produce error messages * loaders: Use common function to print error messages * imlib2_load: Move time_us() to separate file * imlib2_conv: Add option to time save operations * test: Fix pr_info() when not printing to stdout * loading: Enable calling function on loader load/unload * HEIF loader: Call heif_[de]init() on loader load/unload * autofoo: Don't check for freetype if we are building without text * QOI loader: Add progress calback, indent, cosmetics * Loaders: Static constify some data that may as well be * TGA loader: Fix TGA v2.0 signature check * test: Add basic qoi checks * test_scale: Test scaling some more * scaling: Unifdef OLD_SCALE_DOWN * scaling: Correct scaleinfo array length * scaling: Move scaling function call sequence into common __imlib_Scale() * scaling: Cosmetics (comments) * scaling: Simplify scaling points calculation (eliminate j) * scaling: Change ypoints[] from pointers to indices * scaling: Cosmetics * scaling: Minor refactoring * scaling: Correct scaling up * test_scale: Update for new scaling * image: Fix missing munmap() when using imlib_load_image_fd() * image: Fix potentially using incorrect file size * file: Remove a couple of unused functions * image: Fix potentially using incorrect file size - fixup * test: Bypass wrappers when running tests * test_load: Minor fix in debug message * Add new raw loader * TIFF loader: Slightly more strict signature check * image: Use sub-second time info when available * image: Fix preservation of alpha chanel flag in imlib_clone_image() * image cache: Avoid negative refcounts * image cache: Drop redundant cleanup * image cache: Rework cleanup * Revert "scaling: Correct scaling up" * Revert "test_scale: Update for new scaling" * scaling: Various trivial changes * scaling: Improve non-AA scale-up case * scaling: Correct scaling up - take 2 * test_scale: Update for new scaling (re-applied) * test_scale: Exercise non-AA path too * WEBP saver: allow lossless and respect compression tag * add a new QOI decoder * QOI loader: fix build on non-gnu compilers * QOI loader: use memcmp for magic and endmarker check * Y4M loader: check file size before magic check * loading: add some debug logs * loading: check for alloc failure * Y4M loader: use custom y4m parser * test_load: allow y4m memory loading * file: Remove unused functions some more * introduce imlib_image_decache_file() ==== kernel-firmware ==== Version update (20230731 -> 20230814) Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-ath11k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-prestera kernel-firmware-qcom kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network - Update to version 20230814 (git commit 0e048b061bde): * amdgpu: DMCUB updates for various AMDGPU asics * Revert "amdgpu: partially revert firmware for GC 11.0.0 and GC 11.0.2" * amdgpu: partially revert firmware for GC 11.0.0 and GC 11.0.2 * cirrus: Add CS35L41 firmware for HP G11 models * linux-firmware: Update AMD cpu microcode * rtl_bt: Add firmware v2 file for RTL8852C * Revert "rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225" * amdgpu: DMCUB updates for various AMDGPU asics * cxgb4: Update firmware to revision 1.27.4.0 * Mellanox: Add new mlxsw_spectrum firmware xx.2012.1012 * linux-firmware: Add URL for latest FW binaries for NXP BT chipsets * rtw89: 8851b: update firmware to v0.29.41.1 * qcom: sdm845: add RB3 sensors DSP firmware - Drop the obsoleted patch amd-ucode-CVE-2023-20569.patch ==== libfprint ==== Version update (1.94.5+tod1 -> 1.94.6+tod1) - update to 1.94.6+tod1: * goodixmoc: New PIDs 0x60A4, 0x60BC, 0x6092, 0x633C and 0x6304. * goodixmoc: Fix missing "enroll create" state. * elanmoc: New PID 0x0C99. * upektc: Improve compatibility with sensors 147e:2016. * aes4000: Actually support 08FF:5501 devices. * virtual-device-listener: Fix failing tests with GLib 2.76 * tests: Add installed tests * Added installed TOD tests * #526 libfprint: fpcmoc: use after free if enrollment or identification is cancelled (Vasily Khoruzhick) - New installed-tests is set to disabled ==== libxmlb ==== Version update (0.3.11 -> 0.3.13) - Update to 0.3.13: * Use indexes when binding value * Correctly tokenize when using a bound text value * Ensure tokens are all NULL when using xb_opcode_init() * Avoid building errors and debug strings when possible to make XbQuery faster * Fix content type detection on macOS * Inline a number of machine internals to make queries faster * Make zstd support optional * Setup various release build options ==== lvm2 ==== Subpackages: liblvm2cmd2_03 - blkdeactivate calls wrong mountpoint cmd (bsc#1214071) + bug-1214071-blkdeactivate_calls_wrong_mountpoint.patch ==== lvm2-device-mapper ==== Subpackages: device-mapper libdevmapper-event1_03 libdevmapper1_03 - blkdeactivate calls wrong mountpoint cmd (bsc#1214071) + bug-1214071-blkdeactivate_calls_wrong_mountpoint.patch ==== mokutil ==== - Remove modhash (bsc#1214358) + The modhash script is rarely used and it's impractical to block a kernel module with the hash. ==== pam_mount ==== Version update (2.19 -> 2.20) Subpackages: libcryptmount0 - Update to release 2.20 * Tokenization support for user principal names (usernames in the form of foo(a)bar.de) * Added a volume option to control empty password behavior ==== pipewire ==== Subpackages: gstreamer-plugin-pipewire libpipewire-0_3-0 pipewire-alsa pipewire-jack pipewire-lang pipewire-libjack-0_3 pipewire-modules-0_3 pipewire-pulseaudio pipewire-spa-plugins-0_2 pipewire-spa-tools pipewire-tools - Fix from upstream to ensure effect and sink nodes are set to running: * 0001-context-Dont-stop-setting-runnable-when-meeting-the-driving.patch - Fix from upstream to prevent a crash when stopping a device provider: * 0001-gst-Prevent-a-crash-when-stopping-device-provider.patch - Fix from upstream to fix a regression that makes plugins/effects disappear in Carla Patchbay when there's no playback: * 0001-jack-ports-become-visible-when-the-registration-is-queued.patch * 0002-jack-handle-node.always-process-=-false-jack-nodes.patch - Fix from upstream to fix pavucontrol and plasma-pa showing duplicated sinks after resume or switching audio device profiles (boo#1214374): * 0001-pulse-server-set-all-change_mask-flags-when-removing.patch ==== procps ==== Subpackages: libprocps8 procps-lang - Modify patches * procps-ng-3.3.9-w-notruncate.diff * procps-ng-3.3.17-logind.patch to real to not truncate output of w with option -n - procps-ng-3.3.17-logind.patch: Backport from 4.x git, prefer logind over utmp (jsc#PED-3144) ==== rebootmgr ==== Version update (2.0 -> 2.1) - Update to version 2.1 - Support systemctl soft-reboot (systemd >= v254) - Typo fix in spec description ==== rubygem-moneta ==== Version update (1.5.2 -> 1.6.0) - updated to version 1.6.0 see installed CHANGES 1.6.0 * Adapters - Support for Rails 6.1 and above (Adapters::ActiveRecord, Adapters::ActiveSupportCache, ActiveSupportCache::MonetaStore) * Adapters::YAML - add `theadsafe` option * Adapters::Sequel - fix deadlock issue with #increment on MySQL in newer Sequel versions (#244) * Adapters::Sequel - fix issue with Postgres HStore on newer Postgres (#243) * Adapters - fixed an issue many adapters had where #merge! errored if passed an empty hash (#246) * Support changes - Drop support for 2.3 and 2.4, add support for 3.x ==== sysvinit ==== Version update (3.07 -> 3.08) Subpackages: sysvinit-tools sysvinit-tools-doc - Update to sysvinit 3.08 * For OpenSUSE only cosmetic change which is support of kexec for SysVinit reboot (not installed at all) [View Less]

1 0

New Tumbleweed snapshot 20230819 released!
by Dominique Leuenberger 21 Aug '23

21 Aug '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/… [View More]

2 1

New Tumbleweed snapshot 20230818 released!
by Dominique Leuenberger 19 Aug '23

19 Aug '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/… [View More]openSUSE:Submitting_bug_reports Packages changed: MozillaFirefox (116.0.2 -> 116.0.3) bash-completion bluez ceph libimobiledevice (1.3.0+179git.20230430 -> 1.3.0+190git.20230705) mozc openvpn (2.6.5 -> 2.6.6) perl-Authen-SASL (2.16 -> 2.170.0) procps4 python-SQLAlchemy python-gssapi python-numpy (1.24.2 -> 1.25.2) sac shadow (4.13 -> 4.14.0) smartmontools (7.3 -> 7.4) === Details === ==== MozillaFirefox ==== Version update (116.0.2 -> 116.0.3) Subpackages: MozillaFirefox-translations-common - Mozilla Firefox 116.0.3 * Fixed an issue for OPFS users that broke access to files that were locally cached in a previous version (bmo#1847989, bmo#1847619) * Fixed an issue that was breaking screensharing for some users on Wayland (bmo#1841851) * Fixed an issue where a fullscreen notification was persistently being shown to a user, even after disabling it (bmo#1847901) * Fixed an issue where Firefox would hang when doing a Google search (bmo#1847066) - After further testing on memory consumption during linking, it's safe to remove most of the memory reducing options for ix86 linker. A combination of these actually resulted in the OOM condition. It's even possible to add basic debugging info while keeping linker memory consumption at about 2GB ==== bash-completion ==== - Modify patches * ls-completion-boo889319.patch * rm-completion-smart-boo958462.patch to avoid skipping spaces after last word on command line (boo#1210974) - Add patch fix_quote_readline_by_ref.patch * Do not escape leading ~ nor backslash and avoid empty quoting ==== bluez ==== Subpackages: bluez-auto-enable-devices bluez-cups bluez-zsh-completion libbluetooth3 - For pushing bluez 5.68 to 15-SP6 (bluez-5.65), sync change log: (jsc#PED-5599) - RPi-Move-the-43xx-firmware-into-lib-firmware.patch be removed by Stefan Seyfried since updating to bluez-5.66. (bsc#995059)(bsc#1094902) Because the header file has "#ifndef FIRMWARE_DIR...#define FIRMWARE_DIR /etc/firmare" instead of patching. So we just supply FIRMWARE_DIR on compiler's command line in bluez.spec: export CPPFLAGS="$CPPFLAGS -DFIRMWARE_DIR='\"/lib/firmware\"' ==== ceph ==== Subpackages: librados2 librbd1 - restrict to older Cython ==== libimobiledevice ==== Version update (1.3.0+179git.20230430 -> 1.3.0+190git.20230705) - Update to version 1.3.0+190git.20230705: * tools/idevicecrashreport: Silence compiler warning * Silence (v)asprintf related compiler warnings * Updated OpenSSL-specific code to use OpenSSL 3.0+ API * 3rd_party/libsrp6a-sha512: Updated to work with OpenSSL 3.0+ API * 3rd_party/libsrp6a-sha512: Update function definitions to modern style * 3rd_party/ed25519: Silence compiler warning about missing return value for fread * tools/idevicedebug: Add missing default case for switch statement * tools/idevicedevmodectl: Add missing include * idevice: Add missing include for Windows * idevice: Fix network address handling in other code paths too * idevice: Use network addresses as is from what we get from (lib)usbmuxd - restrict to Cython < 3 ==== mozc ==== Subpackages: fcitx-mozc ibus-mozc ibus-mozc-candidate-window mozc-gui-tools - Fix build without %jobs ==== openvpn ==== Version update (2.6.5 -> 2.6.6) - update to 2.6.6: * configure.ac: fix typ0 in LIBCAPNG_CFALGS * Avoid unused function warning/error on FreeBSD (and potientially others) * fix warning with gcc 12.2.0 (compiler bug?) * Fix CR_RESPONSE mangaement message using wrong key_id * Print a more user-friendly error when tls-crypt-v2 client auth fails * Ignore Ipv6 route delete request on Android and set ipv4 verbosity to 7 * Revert commit 423ced962d * Implement using --peer-fingerprint without CA certificates * show extra info for OpenSSL errors * dist: add more missing files only used in the MSVC build * dist: Include all documentation in distribution * unit_tests: Add missing cert_data.h to source list for unit tests * test_tls_crypt: Improve mock() usage to be more portable * Remove old Travis CI related files * options: Do not hide variables from parent scope * pkcs11_openssl: Disable unused code * route: Fix overriding return value of add_route3 ==== perl-Authen-SASL ==== Version update (2.16 -> 2.170.0) - Remove perl526.path (not needed anymore) - updated to 2.1700 see /usr/share/doc/packages/perl-Authen-SASL/Changes 2.1700 2023-08-09 [Fixed] - Version numbering (released as 2.1700, because 2.17 < 2.1401) - POD errors - Typos - Minimum Perl version 5.005 -> 5.6.0 - Kwalitee errors * Accidentally packaged MYMETA.* * 'use warnings;' added in all modules * Synchronized versions in all modules - Out of bounds substr() (RT 85294) [Added] - README - More tests [Changed] - Release switched from EUMM to D::Z [Removed] - Authen::SASL::Cyrus is no longer loaded as an implementation; Authen::SASL::XS has been the successor for more than a decade ==== procps4 ==== Subpackages: libproc2-0 procps4-lang - Modify patch procps-ng-3.3.9-w-notruncate.diff to real to not truncate output of w with option -n - procps-ng-4.0.3-logind.patch: Backport from 4.x git, prefer logind over utmp (jsc#PED-3144) - procps-ng-3.3.9-w-notruncate.diff: Rebase ==== python-SQLAlchemy ==== - use generic Cython >= 3 buildrequires ==== python-gssapi ==== - add d9200d1018ac916b30433da23898c8c5fbde0f28.patch to improve cython 3.x interoperability ==== python-numpy ==== Version update (1.24.2 -> 1.25.2) - Use %pyproject_wheel and %pyproject_install macros - Disable broken tests in armv7l (bsc#1212710) - limit to Cython < 3 - update to 1.25.2: * Upgrade various build dependencies. * use ``-ftrapping-math`` with Clang on macOS * properly handle negative indexes in ufunc_at fast path * PyObject_IsTrue and PyObject_Not error handling in setflags * histogram small range robust * Update meson.build files from main branch * exclude min, max and round from ``np.__all__`` * Dependabot updates * Fix the signature for np.array_api.take * update OpenBLAS to an intermeidate commit * Fix reference count leak in str(scalar). * fix invalid function pointer conversion error * Factor out slow ``getenv`` call used for memory policy warning * correct URL in cirrus.star [skip cirrus] * Fix C types in scalartypes * do not modify the input to ufunc_at * Further fixes to indexing loop and added tests - Update to 1.25.1: * NumPy 1.25.1 is a maintenance release that fixes bugs and regressions discovered after the 1.25.0 release. The Python versions supported by this release are 3.9-3.11. * #23968: MAINT: prepare 1.25.x for further development * #24036: BLD: Port long double identification to C for meson * #24037: BUG: Fix reduction return NULL to be goto fail * #24038: BUG: Avoid undefined behavior in array.astype() * #24039: BUG: Ensure __array_ufunc__ works without any kwargs passed * #24117: MAINT: Pin urllib3 to avoid anaconda-client bug. * #24118: TST: Pin pydantic<2 in Pyodide workflow * #24119: MAINT: Bump pypa/cibuildwheel from 2.13.0 to 2.13.1 * #24120: MAINT: Bump actions/checkout from 3.5.2 to 3.5.3 * #24122: BUG: Multiply or Divides using SIMD without a full vector can... * #24127: MAINT: testing for IS_MUSL closes #24074 * #24128: BUG: Only replace dtype temporarily if dimensions changed * #24129: MAINT: Bump actions/setup-node from 3.6.0 to 3.7.0 * #24134: BUG: Fix private procedures in f2py modules - Skipped 1.25.0: * The NumPy 1.25.0 release continues the ongoing work to improve the handling and promotion of dtypes, increase the execution speed, and clarify the documentation. There has also been work to prepare for the future NumPy 2.0.0 release, resulting in a large number of new and expired deprecation. Highlights are: - Support for MUSL, there are now MUSL wheels. - Support the Fujitsu C/C++ compiler. - Object arrays are now supported in einsum - Support for inplace matrix multiplication (@=). * Full changelog: https://github.com/numpy/numpy/releases/tag/v1.25.0 The Python versions supported in this release are 3.9-3.11. - Remove upstream patch: * remove-deprecated-hypothesis-funcs.patch ==== sac ==== - Clean the spec file a bit to make it more readable ==== shadow ==== Version update (4.13 -> 4.14.0) Subpackages: libsubid4 login_defs - Remove dependency on libbsd: On Tumbleweed we have glibc 2.38 already thus string functions like strlcpy will be present and won't be needed from libbsd. `readpassphrase()` is then the only function from libbsd not present. Upstream shadow has an in tree copy of it, that is used when the `--without-libbsd` flag is passed along. By relying on glibc 2.38 we don't need to add libbsd and libmd to our ring0 but can't easily upgrade on SLE. - Update to 4.14.0: * configure: add with-libbsd option * Code cleanup * Replace utmp interface #757 * new option enable-logind #674 * shadow userdel: add the adaptation to the busybox ps in 01-kill_user_procs.sh * chsh: warn if root sets a shell not listed in /etc/shells #535 * newgrp: fix potential string injection * lastlog: fix alignment of Latest header * Fix yescrypt support #748 * chgpasswd: Fix segfault in command-line options * gpasswd: Fix password leak * Add --prefix to passwd, chpasswd and chage #714 (bsc#1206627) * usermod: fix off-by-one issues #701 * ch(g)passwd: Check selinux permissions upon startup #675 * sub_[ug]id_{add,remove}: fix return values * chsh: Verify that login shell path is absolute #730 * process_prefix_flag: Drop privileges * run_parts for groupadd and groupdel #706 * newgrp/useradd: always set SIGCHLD to default * useradd/usermod: add --selinux-range argument #698 * sssd: skip flushing if executable does not exist #699 * semanage: Do not set default SELinux range #676 * Add control character check #687 * usermod: respect --prefix for --gid option * Fix null dereference in basename * newuidmap and newgidmap: support passing pid as fd * Prevent out of boundary access #633 * Explicitly override only newlines #633 * Correctly handle illegal system file in tz #633 * Supporting vendor given -shells- configuration file #599 * Warn if failed to read existing /etc/nsswitch.conf * chfn: new_fields: fix wrong fields printed * Allow supplementary groups to be added via config file #586 * useradd: check if subid range exists for user #592 (rh#2012929) - Refresh useradd-default.patch - Remove upstreamed patches: * useradd-userkeleton.patch * shadow-audit-no-id.patch * shadow-fix-print-login-timeout.patch * shadow-CVE-2023-29383.patch - Dont build lastlog (lastlog.legacy) anymore since we use lastlog2 by default now. - This release depends either on libbsd or on glibc >= 2.38 which only recently got released. libbsd (and libmd) would be new packages in our ring0 ==== smartmontools ==== Version update (7.3 -> 7.4) - Update to version 7.4: * See NEWS and ChangeLog files for full details - Drop smartmontools-smartctl-NVMe-big-endian.patch (upstreamed) - Refresh smartmontools-suse-default.patch [View Less]

1 0

New Tumbleweed snapshot 20230817 released!
by Dominique Leuenberger 19 Aug '23

19 Aug '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/… [View More]openSUSE:Submitting_bug_reports Packages changed: apache2 apache2-manual apache2-prefork apache2-utils bind (9.18.17 -> 9.18.18) ca-certificates-mozilla chrony (4.3 -> 4.4) gnome-bluetooth (42.5 -> 42.6) less (633 -> 643) libXaw3d (1.6.4 -> 1.6.5) libgit2 (1.7.0 -> 1.7.1) libzypp (17.31.18 -> 17.31.19) procps4 qt6-declarative wtmpdb (0.8.0 -> 0.9.0) === Details === ==== apache2 ==== - Enable building of mod_md ==== apache2-manual ==== - Enable building of mod_md ==== apache2-prefork ==== - Enable building of mod_md ==== apache2-utils ==== - Enable building of mod_md ==== bind ==== Version update (9.18.17 -> 9.18.18) Subpackages: bind-doc bind-utils - Update to release 9.18.18 Feature Changes: * When a primary server for a zone responds to an SOA query, but the subsequent TCP connection required to transfer the zone is refused, that server is marked as temporarily unreachable. This now also happens if the TCP connection attempt times out, preventing too many zones from queuing up on an unreachable server and allowing the refresh process to move on to the next configured primary more quickly. * The dialup and heartbeat-interval options have been deprecated and will be removed in a future BIND 9 release. Bug Fixes: * Processing already-queued queries received over TCP could cause an assertion failure, when the server was reconfigured at the same time or the cache was being flushed. This has been fixed. * Setting dnssec-policy to insecure prevented zones containing resource records with a TTL value larger than 86400 seconds (1 day) from being loaded. This has been fixed by ignoring the TTL values in the zone and using a value of 604800 seconds (1 week) as the maximum zone TTL in key rollover timing calculations. ==== ca-certificates-mozilla ==== - readd _multibuild ==== chrony ==== Version update (4.3 -> 4.4) Subpackages: chrony-pool-openSUSE - Update to 4.4: * Add support for AES-GCM-SIV with Nettle >= 3.9 to shorten NTS cookies to avoid some length-specific blocking of NTP on Internet. * Add support for multiple refclocks using extpps option on one PHC. * Add maxpoll option to hwtimestamp directive to improve PHC tracking with low packet rates * Add hwtstimeout directive to configure timeout for late timestamps. * Handle late hardware transmit timestamps of NTP requests on all sockets. * Handle mismatched 32/64-bit time_t in SOCK refclock samples * Improve source replacement * Log important changes made by command requests (chronyc) * Refresh address of NTP sources periodically * Set DSCP for IPv6 packets * Shorten NTS-KE retry interval when network is down * Update seccomp filter for musl * Warn if loading keys from file with unexpected permissions * Warn if source selection fails or falseticker is detected * Add selectopts command to modify source-specific selection options. * Add timestamp sources to serverstats report and make its fields 64-bit. * Add -e option to chronyc to indicate end of response - Update clknetsim to snapshot ef2a7a9. ==== gnome-bluetooth ==== Version update (42.5 -> 42.6) Subpackages: gnome-bluetooth-lang libgnome-bluetooth-3_0-13 libgnome-bluetooth-ui-3_0-13 typelib-1_0-GnomeBluetooth-3_0 - Update to version 42.6: + Fix problems with icons for mice and tablets. + Updates status labels to be dimmed by default. + Updated translations. ==== less ==== Version update (633 -> 643) - Update to 643: * Fix problem when a program piping into less reads from the tty, like sudo asking for password (github #368). * Fix search modifier ^E after ^W. * Fix bug using negated (^N) search (github #374). * Fix bug setting colors with -D on Windows build (github #386). * Fix reading special chars like PageDown on Windows (github #378). * Fix mouse wheel scrolling on Windows (github #379). * Fix erroneous EOF when terminal window size changes (github #372). * Fix compile error with some definitions of ECHONL (github #395). * Fix crash on Windows when writing logfile (github #405). * Fix regression in exit code when stdin is /dev/null and output is a file (github #373). * Add lesstest test suite to production release (github #344). * Change lesstest output to conform with automake Simple Test Format (github #399). ==== libXaw3d ==== Version update (1.6.4 -> 1.6.5) - Update to libXaw3d 1.6.5: * Set close-on-exec when opening files * configure: pass noyywrap to AC_PROG_LEX if using autoconf 2.70 or later * Raises minimum autoconf version from 2.60 to 2.64 for m4_version_prereq * Clears autoconf warning: configure.ac:29: warning: AC_PROG_LEX without either yywrap or noyywrap is obsolete ./lib/autoconf/programs.m4:716: _AC_PROG_LEX is expanded from... ./lib/autoconf/programs.m4:709: AC_PROG_LEX is expanded from... configure.ac:29: the top level * configure: Use LT_INIT from libtool 2 instead of deprecated AC_PROG_LIBTOOL * AC_PROG_LIBTOOL was replaced by LT_INIT in libtool 2 in 2008, so it's time to rely on it. * Clears autoconf warnings: configure.ac:13: warning: The macro `AC_PROG_LIBTOOL' is obsolete. configure.ac:13: You should run autoupdate. aclocal.m4:3465: AC_PROG_LIBTOOL is expanded from... configure.ac:13: the top level * libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. * Issue #5: incompatible function pointer passed in _XawImRealize() * Import wrapper function with expected arguments from libXaw, where it appears to have been originally fixed in XFree86 3.9Nb by Paulo Cesar Pereira de Andrade. - Port patch xaw3d-secure.patch ==== libgit2 ==== Version update (1.7.0 -> 1.7.1) - update to 1.7.1: * proxy: Return an error for invalid proxy URLs instead of crashing * ssh: fix known_hosts leak in _git_ssh_setup_conn * repository: make cleanup safe for re-use with grafts * fix: Add missing include for oidarray * Revert "CMake: Search for ssh2 instead of libssh2." ==== libzypp ==== Version update (17.31.18 -> 17.31.19) - Fix zypp-tui/output/Out.h to build with clang. - Fix zypp/Arch.h for clang (fixes #478) Clang seems to have issues with picking the overload in std::men_fn if there is a static overload of a member function. We need to explicitely specify the correct type of the function pointer. To make sure this would not break compiling a application with clang that builds against libzypp this patch works around the problem. - version 17.31.19 (22) ==== procps4 ==== Subpackages: libproc2-0 procps4-lang - Add patch CVE-2023-4016.patch * CVE-2023-4016: ps buffer overflow (bsc#1214290) ==== qt6-declarative ==== Subpackages: libQt6LabsAnimation6 libQt6LabsFolderListModel6 libQt6LabsQmlModels6 libQt6LabsSettings6 libQt6LabsSharedImage6 libQt6LabsWavefrontMesh6 libQt6Qml6 libQt6QmlCore6 libQt6QmlLocalStorage6 libQt6QmlModels6 libQt6QmlWorkerScript6 libQt6QmlXmlListModel6 libQt6Quick6 libQt6QuickControls2-6 libQt6QuickControls2Impl6 libQt6QuickDialogs2-6 libQt6QuickDialogs2QuickImpl6 libQt6QuickDialogs2Utils6 libQt6QuickEffects6 libQt6QuickLayouts6 libQt6QuickParticles6 libQt6QuickShapes6 libQt6QuickTemplates2-6 libQt6QuickTest6 qt6-declarative-imports - Reduce memory constraints for riscv64 - Sort license tags ==== wtmpdb ==== Version update (0.8.0 -> 0.9.0) Subpackages: libwtmpdb0 - Update to version 0.9.0 - Try to detect systemctl soft-reboot - Many conversation warning/error fixes [View Less]

1 0

Tumbleweed - Review of the week 2023/33
by Dominique Leuenberger 18 Aug '23

18 Aug '23

Dear Tumbleweed users and hackers, Since the last weekly review, we have ‘only’ delivered six snapshots (0811…0816). Snapshot 0817 is still hanging in QA and is thus not part of today’s review. The most relevant changes delivered in the aforementioned snapshots are: * Node.JS 20.5.1 * Meson 1.2.1 * Python 3.11, configured for PEP-0668 (externally managed system tree) * Mozilla Firefox 116.0.2 * NetworkManager 1.44.0 * glibc 2.38: rebuild mode of OBS was changed from ‘local’ (only … [View More]

1 0

Main

Development

Information

Community

Social Media

Other

openSUSE Factory