December 2020 - openSUSE Factory - openSUSE Mailing Lists

New package rshim for openSUSE:Leap:15.3
by Matthias Brugger 04 Dec '20

04 Dec '20

Hi all, I've submitted a new package to Leap 15.3 called 'rshim'. It is part of Tumbleweed for a while now. It is a commandline tool to initialize and access Mellanox/Nvidia BlueField smart NICs and data processing units. [1] I've tested the package on x86_64 and aarch64. The SR can be find here: https://build.opensuse.org/request/show/850415 Regards, Matthias [1] https://www.nvidia.com/en-us/networking/products/data-processing-unit/

3 3

Booting kernels older than v5.7
by Thomas Zimmermann 04 Dec '20

04 Dec '20

Hi, I'm on the latest TW. I'm trying to bisect for https://bugzilla.suse.com/show_bug.cgi?id=1178474 but I cannot get any kernel older than v5.7 to boot. I do the usual kernel build + modules_install + install. After GRUB, the message says "Loading kernel", then "Loading ramdisk". Then the system stops booting without further messages. Did anything related change around v5.7? Maybe the ramdisk format/compression? Best regards Thomas -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer

3 3

New Tumbleweed snapshot 20201202 released!
by Dominique Leuenberger 04 Dec '20

04 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: fcitx-qt5 (1.2.2 -> 1.2.5) gnome-tweaks hdparm libmodulemd (2.9.4 -> 2.10.0) mtools (4.0.25 -> 4.0.26) pam_mount pcsc-cyberjack perl-Types-Serialiser (1.0 -> 1.01) php7 python-atpublic (1.0 -> 2.1.1) python-scrypt (0.8.15 -> 0.8.17) zsh === Details === ==== fcitx-qt5 ==== Version update (1.2.2 -> 1.2.5) - update version 1.2.5 * many fixes are ported from fcitx5 counter part during the developement. Some fixes related to focus and relative rect to allow the correct input window positioning on gnome-shell wayland mode. - drop fix-remove-paths-warnings.patch, upstreamed ==== gnome-tweaks ==== Subpackages: gnome-tweaks-lang - Add gnome-tweaks-port-libhandy-1.patch: Port to using new handy. ==== hdparm ==== - prepare usrmerge (boo#1029961) ==== libmodulemd ==== Version update (2.9.4 -> 2.10.0) - Update to 2.10.0 + Add modulemd-obsoletes + Add modulemd v3 format - Fix build for 32-bit architectures with patch from upstream + Patch: 0001-Fix-integer-size-issue-on-32-bit-platforms.patch ==== mtools ==== Version update (4.0.25 -> 4.0.26) - mtools 4.0.26: * Ignore image file locking errors if we are performing a read- only access anyways - remove obsolete texinfo packaging macros, update signing keyring ==== pam_mount ==== Subpackages: libcryptmount0 libcryptmount0-32bit pam_mount-32bit - Restore symlinks for crypt_LUKS Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1179229 ==== pcsc-cyberjack ==== - make sure that the rule files are not marked as executable ==== perl-Types-Serialiser ==== Version update (1.0 -> 1.01) - Add license to cpanspec.yml (no license in Makefile.PL, META.(yml|json), pod and no LICENSE file) - updated to 1.01 see /usr/share/doc/packages/perl-Types-Serialiser/Changes 1.01 Tue Dec 1 02:46:33 CET 2020 - implement Types::Serialiser::as_bool. - slight doc tweaks. ==== php7 ==== Subpackages: apache2-mod_php7 php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter - fix building with new apache2 from Apache development repo ==== python-atpublic ==== Version update (1.0 -> 2.1.1) - Update to v2.1.1 * Clean up some typing problems * Reorganized docs and tests out of the code directory * Fix the Windows CI tests - from v2.0 * Drop Python 3.4 and 3.5; add Python 3.8 and 3.9. * The C implementation is removed * Added an ``@private`` decorator * Build and test on Windows in addition to Linux * Fix the doctests so that they actually run and pass! * Add type annotations and API reference documentation * Internal improvements and modernizations ==== python-scrypt ==== Version update (0.8.15 -> 0.8.17) - update to 0.8.17: * add_dll_directory for python 3.8 on windows, as importlib.util.find_spec does not search all paths anymore * Add additional test vector from RFC ==== zsh ==== - prepare usrmerge (boo#1029961)

1 0

openSUSE:Factory - Build fail notification
by DimStar / Dominique Leuenberger 03 Dec '20

03 Dec '20

Dear Package maintainers and hackers. Below package(s) in openSUSE:Factory have been failing to build for at least 4 weeks. We tried to send out notifications to the configured bugowner/maintainers of the package(s), but so far no fix has been submitted. This probably means that the maintainer/bugowner did not yet find the time to look into the matter and he/she would certainly appreciate help to get this sorted. - autofdo Unless somebody is stepping up and submitting fixes, the listed package(s) are going to be removed from openSUSE:Factory. Kind regards, DimStar / Dominique Leuenberger <dimstar(a)opensuse.org>

4 6

Results of openSUSE ARM Usecases survey
by Lubos Kocman 03 Dec '20

03 Dec '20

Ahoy openSUSE! I'd like to give big thanks to all of you who have participated in the survey, the data is pure gold. I'd also like to give thanks to openSUSE Release team who helped to make this survey happen and those of you who went with me through all of the feedback. Cumulated notes from review during past two days can be found here https://etherpad.opensuse.org/p/ReleaseEngineering-20201202-arm . I have processed the exported survey results and turned it into the following wiki page: https://en.opensuse.org/Portal:15.3/Surveys/ARM_Usecases Data showed us that there is a big ARM userbase that essentially doubled over past 12 months. There seems to be still a lot of ARMv7 devices around, and people on these devices care about Leap. Based on this feedback openSUSE Release team is now looking into ways how to bootstrap openSUSE Leap 15.3 for ARMv7. We don't want to let our users down. We will also look into what we can do about the Rasp Pi 4 issues (sound etc.). We will also see what can be done the multilib libraries. There was a also suggestion to support some newer devices or to provide images with different partition setup (no swap or avoiding separate /boot). Next step is that we will process the notes in a closer loop and will make sure to open features, bugs, poo tickets, contact right people to make sure we can be seen as one of the fine tuned distributions for all of these devices. The optional email contacts we've received as part of the survey will be kept within the openSUSE release team. I hope you we will find a great use for the data. Thank you once again. -- Lubos Kocman, Release Manager openSUSE Leap SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg - Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer

1 0

New package submission: xcape
by Vinzenz Vietzke 02 Dec '20

02 Dec '20

Hi, I'd like to submit new package xcape to Factory. It currently lives in X11:Xfce. xcape allows you to use a modifier key as another key when pressed and released on its own. The default behaviour is to generate the Escape key when Left Control is pressed and released on its own. Example: Having xcape -e 'Super_L=Alt_L|F1' set in autostart keeps it running in the background mapping Super key to Alt+F1 which is useful e.g. for opening whiskermenu in Xfce. OBS: https://build.opensuse.org/package/show/X11:xfce/xcape Upstream: https://github.com/alols/xcape I'll open the SR right away after sending this email. vinz.

1 0

[opensuse-factory] YaST: highlights of development sprint 113
by Ancor Gonzalez Sosa 02 Dec '20

02 Dec '20

Time for another development report from the YaST Team (temporarily transmuted in the YaST+Cockpit Team), including - Progress on the Cockpit modules for managing wicked and for transactional updates. - Improvements in the YaST Partitioner regarding management of Btrfs subvolumes. - Hibernation support configurable per product and system role. Check the whole report at https://yast.opensuse.org/blog/2020-11-24/sprint-113 Cheers. -- Ancor González Sosa YaST Team at SUSE Linux GmbH

2 3

New Tumbleweed snapshot 20201130 released!
by Dominique Leuenberger 01 Dec '20

01 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: dmraid kernel-source (5.9.10 -> 5.9.11) lvm2 lvm2-device-mapper php7 (7.4.12 -> 7.4.13) procmail purple-lurch python-pymongo (3.11.0 -> 3.11.1) python-pyzmq (19.0.2 -> 20.0.0) python-sortedcontainers (2.2.2 -> 2.3.0) tigervnc zeromq (4.3.2 -> 4.3.3) === Details === ==== dmraid ==== - prepare usrmerge (boo#1029961) - Remove obsolete Groups tag (fate#326485) ==== kernel-source ==== Version update (5.9.10 -> 5.9.11) Subpackages: kernel-default kernel-docs - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe (git-fixes). - commit 91426ef - Linux 5.9.11 (bsc#1012628). - ah6: fix error return code in ah6_input() (bsc#1012628). - atm: nicstar: Unmap DMA on send error (bsc#1012628). - bnxt_en: read EEPROM A2h address using page 0 (bsc#1012628). - devlink: Add missing genlmsg_cancel() in devlink_nl_sb_port_pool_fill() (bsc#1012628). - enetc: Workaround for MDIO register access issue (bsc#1012628). - Exempt multicast addresses from five-second neighbor lifetime (bsc#1012628). - inet_diag: Fix error path to cancel the meseage in inet_req_diag_fill() (bsc#1012628). - ipv6: Fix error path to cancel the meseage (bsc#1012628). - lan743x: fix issue causing intermittent kernel log warnings (bsc#1012628). - lan743x: prevent entire kernel HANG on open, for some platforms (bsc#1012628). - mlxsw: core: Use variable timeout for EMAD retries (bsc#1012628). - net: b44: fix error return code in b44_init_one() (bsc#1012628). - net: bridge: add missing counters to ndo_get_stats64 callback (bsc#1012628). - netdevsim: set .owner to THIS_MODULE (bsc#1012628). - net: dsa: mv88e6xxx: Avoid VTU corruption on 6097 (bsc#1012628). - net: ethernet: mtk-star-emac: fix error return code in mtk_star_enable() (bsc#1012628). - net: ethernet: mtk-star-emac: return ok when xmit drops (bsc#1012628). - net: ethernet: ti: am65-cpts: update ret when ptp_clock is ERROR (bsc#1012628). - net: ethernet: ti: cpsw: fix cpts irq after suspend (bsc#1012628). - net: ethernet: ti: cpsw: fix error return code in cpsw_probe() (bsc#1012628). - net: ftgmac100: Fix crash when removing driver (bsc#1012628). - net: Have netpoll bring-up DSA management interface (bsc#1012628). - net: ipa: lock when freeing transaction (bsc#1012628). - netlabel: fix our progress tracking in netlbl_unlabel_staticlist() (bsc#1012628). - netlabel: fix an uninitialized warning in netlbl_unlabel_staticlist() (bsc#1012628). - net: lantiq: Wait for the GPHY firmware to be ready (bsc#1012628). - net/mlx4_core: Fix init_hca fields offset (bsc#1012628). - net/mlx5e: Fix refcount leak on kTLS RX resync (bsc#1012628). - net/ncsi: Fix netlink registration (bsc#1012628). - net: phy: mscc: remove non-MACSec compatible phy (bsc#1012628). - net: qualcomm: rmnet: Fix incorrect receive packet handling during cleanup (bsc#1012628). - net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid() (bsc#1012628). - net: stmmac: Use rtnl_lock/unlock on netif_set_real_num_rx_queues() call (bsc#1012628). - net/tls: fix corrupted data in recvmsg (bsc#1012628). - net: x25: Increase refcnt of "struct x25_neigh" in x25_rx_call_request (bsc#1012628). - page_frag: Recover from memory pressure (bsc#1012628). - qed: fix error return code in qed_iwarp_ll2_start() (bsc#1012628). - qed: fix ILT configuration of SRC block (bsc#1012628). - qlcnic: fix error return code in qlcnic_83xx_restart_hw() (bsc#1012628). - sctp: change to hold/put transport for proto_unreach_timer (bsc#1012628). - tcp: only postpone PROBE_RTT if RTT is < current min_rtt estimate (bsc#1012628). - vsock: forward all packets to the host when no H2G is registered (bsc#1012628). - net/mlx5e: Fix check if netdev is bond slave (bsc#1012628). - net/mlx5: Add handling of port type in rule deletion (bsc#1012628). - net/mlx5: Clear bw_share upon VF disable (bsc#1012628). - net/mlx5: Disable QoS when min_rates on all VFs are zero (bsc#1012628). - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter (bsc#1012628). - net: fec: Fix reference count leak in fec series ops (bsc#1012628). - bnxt_en: Fix counter overflow logic (bsc#1012628). - bnxt_en: Free port stats during firmware reset (bsc#1012628). - net: mvneta: fix possible memory leak in mvneta_swbm_add_rx_fragment (bsc#1012628). - net/tls: Fix wrong record sn in async mode of device resync (bsc#1012628). - net: usb: qmi_wwan: Set DTR quirk for MR400 (bsc#1012628). - Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts"" (bsc#1012628). - tools, bpftool: Avoid array index warnings (bsc#1012628). - habanalabs/gaudi: mask WDT error in QMAN (bsc#1012628). - pinctrl: rockchip: enable gpio pclk for rockchip_gpio_to_irq (bsc#1012628). - scsi: ufs: Fix unbalanced scsi_block_reqs_cnt caused by ufshcd_hold() (bsc#1012628). - scsi: ufs: Try to save power mode change and UIC cmd completion timeout (bsc#1012628). - pinctrl: mcp23s08: Print error message when regmap init fails (bsc#1012628). - selftests: kvm: Fix the segment descriptor layout to match the actual layout (bsc#1012628). - ACPI: button: Add DMI quirk for Medion Akoya E2228T (bsc#1012628). - arm64: errata: Fix handling of 1418040 with late CPU onlining (bsc#1012628). - arm64: psci: Avoid printing in cpu_psci_cpu_die() (bsc#1012628). - arm64: smp: Tell RCU about CPUs that fail to come online (bsc#1012628). - um: Call pgtable_pmd_page_dtor() in __pmd_free_tlb() (bsc#1012628). - vfs: remove lockdep bogosity in __sb_start_write (bsc#1012628). - gfs2: fix possible reference leak in gfs2_check_blk_type (bsc#1012628). - hwmon: (pwm-fan) Fix RPM calculation (bsc#1012628). - gfs2: Fix case in which ail writes are done to jdata holes (bsc#1012628). - arm64: Add MIDR value for KRYO2XX gold/silver CPU cores (bsc#1012628). - arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist (bsc#1012628). - arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver (bsc#1012628). - usb: dwc2: Avoid leaving the error_debugfs label unused (bsc#1012628). - arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay (bsc#1012628). - arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay (bsc#1012628). - arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node (bsc#1012628). - arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node (bsc#1012628). - arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node (bsc#1012628). - ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node (bsc#1012628). - Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" (bsc#1012628). - ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY (bsc#1012628). - arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY (bsc#1012628). - Input: adxl34x - clean up a data type in adxl34x_probe() (bsc#1012628). - MIPS: export has_transparent_hugepage() for modules (bsc#1012628). - dmaengine: idxd: fix wq config registers offset programming (bsc#1012628). - arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node (bsc#1012628). - arm64: dts: fsl: fix endianness issue of rcpm (bsc#1012628). - arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio (bsc#1012628). - arm64: dts imx8mn: Remove non-existent USB OTG2 (bsc#1012628). - arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy (bsc#1012628). - ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking (bsc#1012628). - ARM: dts: imx6q-prti6q: fix PHY address (bsc#1012628). - swiotlb: using SIZE_MAX needs limits.h included (bsc#1012628). - tee: amdtee: fix memory leak due to reset of global shm list (bsc#1012628). - tee: amdtee: synchronize access to shm list (bsc#1012628). - dmaengine: xilinx_dma: Fix usage of xilinx_aximcdma_tx_segment (bsc#1012628). - dmaengine: xilinx_dma: Fix SG capability check for MCDMA (bsc#1012628). - ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 (bsc#1012628). - ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 (bsc#1012628). - ARM: dts: stm32: Define VIO regulator supply on DHCOM (bsc#1012628). - ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor (bsc#1012628). - ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM (bsc#1012628). - arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point (bsc#1012628). - ARM: dts: imx50-evk: Fix the chip select 1 IOMUX (bsc#1012628). - dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio (bsc#1012628). - kunit: tool: unmark test_data as binary blobs (bsc#1012628). - rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled (bsc#1012628). - spi: fix client driver breakages when using GPIO descriptors (bsc#1012628). - Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER (bsc#1012628). - Input: elan_i2c - fix firmware update on newer ICs (bsc#1012628). - rfkill: Fix use-after-free in rfkill_resume() (bsc#1012628). - RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device() (bsc#1012628). - RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs (bsc#1012628). - perf lock: Correct field name "flags" (bsc#1012628). - perf lock: Don't free "lock_seq_stat" if read_count isn't zero (bsc#1012628). - SUNRPC: Fix oops in the rpc_xdr_buf event class (bsc#1012628). - drm: bridge: dw-hdmi: Avoid resetting force in the detect function (bsc#1012628). - tools, bpftool: Add missing close before bpftool net attach exit (bsc#1012628). - IB/hfi1: Fix error return code in hfi1_init_dd() (bsc#1012628). - ip_tunnels: Set tunnel option flag when tunnel metadata is present (bsc#1012628). - can: af_can: prevent potential access of uninitialized member in can_rcv() (bsc#1012628). - can: af_can: prevent potential access of uninitialized member in canfd_rcv() (bsc#1012628). - can: dev: can_restart(): post buffer from the right context (bsc#1012628). - can: ti_hecc: Fix memleak in ti_hecc_probe (bsc#1012628). - can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb() (bsc#1012628). - can: peak_usb: fix potential integer overflow on shift of a int (bsc#1012628). - can: flexcan: fix failure handling of pm_runtime_get_sync() (bsc#1012628). - can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPI (bsc#1012628). - can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for devm_regmap_init() (bsc#1012628). - can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistration (bsc#1012628). - can: m_can: m_can_handle_state_change(): fix state change (bsc#1012628). - can: m_can: m_can_class_free_dev(): introduce new function (bsc#1012628). - can: m_can: Fix freeing of can device from peripherials (bsc#1012628). - can: m_can: m_can_stop(): set device to software init mode before closing (bsc#1012628). - dmaengine: idxd: fix mapping of portal size (bsc#1012628). - ASoC: Intel: KMB: Fix S24_LE configuration (bsc#1012628). - ASoC: qcom: lpass-platform: Fix memory leak (bsc#1012628). - spi: cadence-quadspi: Fix error return code in cqspi_probe (bsc#1012628). - selftests/bpf: Fix error return code in run_getsockopt_test() (bsc#1012628). - MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpu (bsc#1012628). - drm/sun4i: dw-hdmi: fix error return code in sun8i_dw_hdmi_bind() (bsc#1012628). - net/mlx5: E-Switch, Fail mlx5_esw_modify_vport_rate if qos disabled (bsc#1012628). - bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made (bsc#1012628). - bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect (bsc#1012628). - can: kvaser_pciefd: Fix KCAN bittiming limits (bsc#1012628). - can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limits (bsc#1012628). - dmaengine: fix error codes in channel_register() (bsc#1012628). - iommu/vt-d: Move intel_iommu_gfx_mapped to Intel IOMMU header (bsc#1012628). - iommu/vt-d: Avoid panic if iommu init fails in tboot system (bsc#1012628). - can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery (bsc#1012628). - can: m_can: process interrupt only when not runtime suspended (bsc#1012628). - xfs: fix the minrecs logic when dealing with inode root child blocks (bsc#1012628). - xfs: strengthen rmap record flags checking (bsc#1012628). - xfs: directory scrub should check the null bestfree entries too (bsc#1012628). - xfs: ensure inobt record walks always make forward progress (bsc#1012628). - xfs: return corresponding errcode if xfs_initialize_perag() fail (bsc#1012628). - ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clock (bsc#1012628). - regulator: ti-abb: Fix array out of bound read access on the first transition (bsc#1012628). - libbpf: Fix VERSIONED_SYM_COUNT number parsing (bsc#1012628). - lib/strncpy_from_user.c: Mask out bytes after NUL terminator (bsc#1012628). - fail_function: Remove a redundant mutex unlock (bsc#1012628). - xfs: revert "xfs: fix rmap key and record comparison functions" (bsc#1012628). - selftests/seccomp: powerpc: Fix typo in macro variable name (bsc#1012628). - selftests/seccomp: sh: Fix register names (bsc#1012628). - bpf, sockmap: Skb verdict SK_PASS to self already checked rmem limits (bsc#1012628). - bpf, sockmap: On receive programs try to fast track SK_PASS ingress (bsc#1012628). - bpf, sockmap: Use truesize with sk_rmem_schedule() (bsc#1012628). - bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self (bsc#1012628). - efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP (bsc#1012628). - counter/ti-eqep: Fix regmap max_register (bsc#1012628). - efi/x86: Free efi_pgd with free_pages() (bsc#1012628). - sched/fair: Fix overutilized update in enqueue_task_fair() (bsc#1012628). - sched: Fix data-race in wakeup (bsc#1012628). - sched: Fix rq->nr_iowait ordering (bsc#1012628). - libfs: fix error cast of negative value in simple_attr_write() (bsc#1012628). - afs: Fix speculative status fetch going out of order wrt to modifications (bsc#1012628). - HID: logitech-hidpp: Add PID for MX Anywhere 2 (bsc#1012628). - HID: mcp2221: Fix GPIO output handling (bsc#1012628). - HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad (bsc#1012628). - HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver (bsc#1012628). - speakup: Do not let the line discipline be used several times (bsc#1012628). - ALSA: firewire: Clean up a locking issue in copy_resp_to_buf() (bsc#1012628). - ALSA: usb-audio: Add delay quirk for all Logitech USB devices (bsc#1012628). - ALSA: ctl: fix error path at adding user-defined element set (bsc#1012628). - ALSA: mixart: Fix mutex deadlock (bsc#1012628). - ALSA: hda/realtek - Add supported for Lenovo ThinkPad Headset Button (bsc#1012628). - ALSA: hda/realtek - Add supported mute Led for HP (bsc#1012628). - ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220) (bsc#1012628). - ALSA: hda/realtek - HP Headset Mic can't detect after boot (bsc#1012628). - tty: serial: imx: fix potential deadlock (bsc#1012628). - tty: serial: imx: keep console clocks always on (bsc#1012628). - HID: logitech-dj: Fix an error in mse_bluetooth_descriptor (bsc#1012628). - efivarfs: fix memory leak in efivarfs_create() (bsc#1012628). - staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids (bsc#1012628). - staging: mt7621-pci: avoid to request pci bus resources (bsc#1012628). - iio: light: fix kconfig dependency bug for VCNL4035 (bsc#1012628). - ext4: fix bogus warning in ext4_update_dx_flag() (bsc#1012628). - xfs: fix forkoff miscalculation related to XFS_LITINO(mp) (bsc#1012628). - ACPI: fan: Initialize performance state sysfs attribute (bsc#1012628). - iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum (bsc#1012628). - iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode (bsc#1012628). - iio: adc: mediatek: fix unset field (bsc#1012628). - iio: cros_ec: Use default frequencies when EC returns invalid information (bsc#1012628). - iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout (bsc#1012628). - iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used (bsc#1012628). - iio/adc: ingenic: Fix battery VREF for JZ4770 SoC (bsc#1012628). - iio: adc: stm32-adc: fix a regression when using dma and irq (bsc#1012628). - serial: ar933x_uart: disable clk on error handling path in probe (bsc#1012628). - arm64: dts: agilex/stratix10: Fix qspi node compatible (bsc#1012628). - spi: lpspi: Fix use-after-free on unbind (bsc#1012628). - spi: Introduce device-managed SPI controller allocation (bsc#1012628). - spi: npcm-fiu: Don't leak SPI master in probe error path (bsc#1012628). - spi: bcm2835aux: Fix use-after-free on unbind (bsc#1012628). - regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200} (bsc#1012628). - regulator: fix memory leak with repeated set_machine_constraints() (bsc#1012628). - regulator: avoid resolve_supply() infinite recursion (bsc#1012628). - regulator: workaround self-referent regulators (bsc#1012628). - gfs2: Fix regression in freeze_go_sync (bsc#1012628). - xtensa: fix TLBTEMP area placement (bsc#1012628). - xtensa: disable preemption around cache alias management calls (bsc#1012628). - mac80211: minstrel: remove deferred sampling code (bsc#1012628). - mac80211: minstrel: fix tx status processing corner case (bsc#1012628). - s390: fix system call exit path (bsc#1012628). - s390/cpum_sf.c: fix file permission for cpum_sfb_size (bsc#1012628). - s390/dasd: fix null pointer dereference for ERP requests (bsc#1012628). - Drivers: hv: vmbus: Allow cleanup of VMBUS_CONNECT_CPU if disconnected (bsc#1012628). - drm/amd/display: Add missing pflip irq for dcn2.0 (bsc#1012628). - drm/i915: Handle max_bpc==16 (bsc#1012628). - drm/i915/tgl: Fix Media power gate sequence (bsc#1012628). - io_uring: don't double complete failed reissue request (bsc#1012628). - mmc: sdhci-pci: Prefer SDR25 timing for High Speed mode for BYT-based Intel controllers (bsc#1012628). - mmc: sdhci-of-arasan: Allow configuring zero tap values (bsc#1012628). - mmc: sdhci-of-arasan: Use Mask writes for Tap delays (bsc#1012628). - mmc: sdhci-of-arasan: Issue DLL reset explicitly (bsc#1012628). - blk-cgroup: fix a hd_struct leak in blkcg_fill_root_iostats (bsc#1012628). - ptrace: Set PF_SUPERPRIV when checking capability (bsc#1012628). - seccomp: Set PF_SUPERPRIV when checking capability (bsc#1012628). - fanotify: fix logic of reporting name info with watched parent (bsc#1012628). - x86/microcode/intel: Check patch signature before saving microcode for early loading (bsc#1012628). - mm: never attempt async page lock if we've transferred data already (bsc#1012628). - mm: fix readahead_page_batch for retry entries (bsc#1012628). - mm: memcg/slab: fix root memcg vmstats (bsc#1012628). - mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault() (bsc#1012628). - Update config files. - commit 1b55838 - Update config files (bsc#1179102). Set AMIGA_PARTITION=y wherever AFFS_FS=m. The AMIGA_PARTITION's Kconfig help suggests: default y if (AMIGA || AFFS_FS=y). And we enable Amiga FS in some configs, but don't enable support for Amiga partitions. That is a bit pointless. So fix this. - commit cc720a5 ==== lvm2 ==== Subpackages: liblvm2cmd2_03 - Update lvm2.spec file (bsc#1177533) - in %postun, disable restart blk-availability.service & lvm2-monitor.service ==== lvm2-device-mapper ==== Subpackages: device-mapper libdevmapper-event1_03 libdevmapper1_03 libdevmapper1_03-32bit - Update lvm2.spec file (bsc#1177533) - in %postun, disable restart blk-availability.service & lvm2-monitor.service ==== php7 ==== Version update (7.4.12 -> 7.4.13) Subpackages: apache2-mod_php7 php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter - do not build firebird extension in any case - updated to 7.4.13: This is a security release which also contains several bug fixes. See https://www.php.net/ChangeLog-7.php#7.4.13 - deleted patch (upstreamed) - php-fix_net-snmp_disable_MD5.patch ==== procmail ==== - Add reproducible2.patch to negate influences from preinstallimage to make package build reproducible ==== purple-lurch ==== - Add libomemo-27.patch to fix encryption ==== python-pymongo ==== Version update (3.11.0 -> 3.11.1) - update to 3.11.1: - Support for Python 3.9. - Initial support for Azure and GCP KMS providers for client side field level encryption is in beta. See the docstring for :class:`~pymongo.mongo_client.MongoClient`, :class:`~pymongo.encryption_options.AutoEncryptionOpts`, and :mod:`~pymongo.encryption`. **Note: Backwards-breaking changes may be made before the final release.** - Fixed a bug where the :class:`bson.json_util.JSONOptions` API did not match the :class:`bson.codec_options.CodecOptions` API due to the absence of a :meth:`bson.json_util.JSONOptions.with_options` method. This method has now been added. - Fixed a bug which made it impossible to serialize :class:`~pymongo.errors.BulkWriteError` instances using :mod:`pickle`. - Fixed a bug wherein PyMongo did not always discard an implicit session after encountering a network error. - Fixed a bug where connections created in the background were not authenticated. - Fixed a memory leak in the :mod:`bson` module when using a :class:`~bson.codec_options.TypeRegistry`. ==== python-pyzmq ==== Version update (19.0.2 -> 20.0.0) - update to version 20.0.0: * fix build with ZeroMQ 4.3.3 * drops support for Python < 3.5 * Respect $PKG_CONFIG env for finding libzmq when building from source * :meth:`.Socket.bind` and :meth:`.Socket.connect` can now be used as context managers. * Hold GIL while calling ``zmq_curve_`` functions, which may fix apparent threadsafety issues. - skip_test_tracker.patch: refreshed ==== python-sortedcontainers ==== Version update (2.2.2 -> 2.3.0) - update to 2.3.0: * Make sort order stable when updating with large iterables. ==== tigervnc ==== Subpackages: libXvnc1 xorg-x11-Xvnc xorg-x11-Xvnc-module - u_tigervnc_update_default_vncxstartup.patch * check first for /usr/libexec/xinit/xinitrc, then /etc/X11/xinit/xinitrc (reported by aschnell @SUSE) ==== zeromq ==== Version update (4.3.2 -> 4.3.3) Subpackages: libzmq5 zeromq-tools - New upstream version 4.3.3: * Denial-of-Service on CURVE/ZAP-protected servers by unauthenticated clients. (CVE-2020-15166, bsc#1176116) If a raw TCP socket is opened and connected to an endpoint that is fully configured with CURVE/ZAP, legitimate clients will not be able to exchange any message. Handshakes complete successfully, and messages are delivered to the library, but the server application never receives them. For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-25wp-cf8g-938m * Stack overflow on server running PUB/XPUB socket (CURVE disabled). The PUB/XPUB subscription store (mtrie) is traversed using recursive function calls. In the remove (unsubscription) case, the recursive calls are NOT tail calls, so even with optimizations the stack grows linearly with the length of a subscription topic. Topics are under the control of remote clients - they can send a subscription to arbitrary length topics. An attacker can thus cause a server to create an mtrie sufficiently large such that, when unsubscribing, traversal will cause a stack overflow. (bsc#1176258) For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-qq65-x72m-9wr8 * Memory leak in PUB server induced by malicious client(s) without CURVE/ZAP. Messages with metadata are never processed by PUB sockets, but the metadata is kept referenced in the PUB object and never freed. (bsc#1176257) For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-4p5v-h92w-6wxw * Memory leak in client induced by malicious server(s) without CURVE/ZAP. When a pipe processes a delimiter and is already not in active state but still has an unfinished message, the message is leaked. (bsc#1176259) For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-wfr2-29gj-5w87 * Heap overflow when receiving malformed ZMTP v1 packets (CURVE disabled). By crafting a packet which is not valid ZMTP v2/v3, and which has two messages larger than 8192 bytes, the decoder can be tricked into changing the recorded size of the 8192 bytes static buffer, which then gets overflown by the next message. The content that gets written in the overflown memory is entirely decided by the sender. (bsc#1176256) For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-fc3w-qxf5-7hp6 For complete list of changes, see https://github.com/zeromq/libzmq/releases/tag/v4.3.3

1 0

openSUSE Release Engineering Meeting 01.12.2020 - ARM usecases initial review
by Lubos Kocman 01 Dec '20

01 Dec '20

Ahoy openSUSE let me thank you all for participating in the survey. The amount of responses was enormous (way more than entire Leap 15.2 release retro)! Let me share thoughts from initial review by peoplew ho came up with the survey. We definitely want to do this on release2release basis so we can see trends. There will be two public rounds of survey review tomorrow on jitsi, everybody is welcome to grab coffee/tee and join. More information can be seen in the invitation from Doug https://news.opensuse.org/2020/12/01/opensuse-release-team-to-share-results… All meeting minutes can be found here: https://etherpad.opensuse.org/p/ReleaseEngineering-meeting Participants: dimstar, dirk, lkocman, a_faerber, maxlin, guillaume_g The survey template for the future: https://etherpad.opensuse.org/p/survey-armv7-suggestions Q: Which ARMv6/ARMv7/ARMv8 (aarch64) hardware are you using? The option 'AArch64 based general purpose (e.g. Mustang, ThunderX/X2, Any UEFI AArch64 platform, aarch64-laptops, other) (SQ05)' contains a lot of choices. We need to break it down to the future. UEFI/aarch64 covers a huge - U-Boot implemented UEFI, too. Perhaps other with text field would help. Q: What distributions do you use on your ARMv6/v7/aarch64 Hardware? Ideas: custom image can be misleading as it could be modified Leap 15.1/15.2/TW image or also unlisted item (JeOS). The original idea was a self-built image containing non-standard patches/package- set/configuration. Andreas: mention Kubic next time? (cf. 211 for G01Q06) consider MicroOS, too? Q: How long are you using openSUSE on ARMv6/v7/v8 already? Growth from 36 - 124 over past 4 years Q: In case you selected Leap, what is the reason for that? Andreas: Some comments look like people don't know that we have aarch64 TW images? cf. 151 for G01Q06 Dirk: we need to invest little bit more into getting Leap (on Arm) right. Q: Would you be okay with migrating your existing Leap installation to openSUSE Tumbleweed? we somehow missed ARMv8/AArch64 but that was due to the description which was ARMv6/7 specific. Andreas: perhaps split questions into two. If you run Leap would you consider Leap question yes/no and vice versa (or split by architecture). Q: Please share us with any information you might want to add in addition. We need to do more marketing/blog posts around aarch64 Raspberry Pi (RPi4 in particular) Lubos: perhaps make a blog post with summary of our userbase and summarize current Arm situation in openSUSE project (what's available and what not). * Sound for Raspberry Pi 4 requested, let's make sure that plan is mentioned in the blog post. Not yet tracked by SUSE for backporting to SP3? Dirk: suggests to do a user case specific blog post for raspi-pi4 (e.g. first contact with opensource world, or computer for kids). Perhaps use the trend of RPi 400. Andreas: someone should test the RPi400 if we do the blog post. Andreas: can we do something so that openSUSE is perceived as more fine-tuned for Raspberry Pi? So it's comparable to e.g. raspbian Guillaume: I think this could be video decoding. Andreas: config tool on Raspbian for editing config.txt - consider a YaST Raspberry Pi module similar to raspi-config? Multilib on aarch64: apps like citrix seem to require 32bit libs. Can we ship multilib on Arm? Guillaume: Rasp Pi4 is capable of running both 32/64bit libs, but some Armv8 hardware are 64-bit only and would need ILP32. (zypper does not allow to install armv7 rpm packages on aarch64) - Andreas: note that ILP32 libs would not help Citrix apps, right? G: ILP32 would not help for 32-bit libs and ILP32 is unlikely to reach upstream. Andreas: -32bit packages seen for ilp32 project, do we need to enable this via some setting? (careful: do not confuse AArch32/armv7 and ILP32 here, we'd need aarch32 in a way that doesn't rule out ilp32 in the future). G: Please do not enable ILP32, there is no support upstream! Dirk: 32bit builds are in fact done on ARMv8 (Andreas: and hopefully not picking up Armv8 features) Andreas: While Raspberry Pi 1 is no longer sold, Raspberry Pi 0W still is, as "new" Armv6 device (G: It should remain in production until at least January 2026). Would be interesting to monitor how to Armv6 numbers evolve over time (getting less vs. going up?) Andreas: report of issues with Raspberry Pi firmware in transactional update mode (157) Andreas: report of problems with RPi.GPIO on RPi3/RPi4 (241) ddemaio: Might consider adding a demographic question to the survey to know when best to brief results to community. Something like "What region are you in. [] Asia [] EMEA [] Americas

1 0

New PulseAudio 14 coming to TW
by Ondrej Holecek 01 Dec '20

01 Dec '20

Hi all, you may have noticed announcement of new PulseAudio 14 release last week. This release bring many many fixes and features, for complete list please see [1]. I would like to point out one "feature" ( [2] ) which may be disruptive to you, depending on the PA configuration. Before PA14, GNOME sound settings manipulated stream routing by overwriting all entries in stream-restore database. PA14 prevents this behaviour, but during testing it turned out old GNOME settings can conflict with new routing logic. [3] Because of difficulty determining what setting was done by GNOME and what settings were done manually by users PA14, it was decided to do one time clearing of the stream-restore database. This will cause PA14 to forget all the routing on the first start of PA14. That means for example if you had different applications configured to play on different outputs, you will need to redo your settings once again. Not enabling this one-time routing database clear would lead to very misleading behaviour of PA14 playing on different outputs but showing different routing in applications. This should be only known inconvenience with new PA14. PA14 is currently in staging, looking forward to be included in one of upcoming Tumbleweed releases. ;) Ondrej 1: https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/14.0/ 2: https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/14.0/#compile-ti… 3: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/832

1 0