October 2018 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Kmail crash on exit
by Ianseeks 19 Oct '18

19 Oct '18

Hi Since the last snapshot, kmail crashes on exit via File/Quit. Anyone else have this issue? I reported it via the bug handler. Works okay as long as i don't quit :) regards Ian -- opensuse:tumbleweed:20181015 Qt: 5.11.2 KDE Frameworks: 5.50.0 - KDE Plasma: 5.14.0 - kwin 5.14.0 kmail2 5.9.2 - akonadiserver 5.9.2 - Kernel: 4.18.13-1-default - xf86-video-nouveau: 1.0.15 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 16

[opensuse-factory] Tumbleweed - Review of the week 2018/42
by Dominique Leuenberger / DimStar 19 Oct '18

19 Oct '18

Dear Tumbleweed users and hackers, Again we managed to publish two snapshots during this week: 1012 and 1015; 1011 stayed too long in openQA to be released and 1017 was discarded. While trying to fix a bug, where Mozilla Firefox is only published as x86_64 package in the repo, but not 32bit variant is present, we ‘shot over the ; andt, and ended up with only the 32bit version. As we did not want to change architecture for all users just as a side effect of an error, that snapshot was discarded. So, the two snapshots that DID get published brought you those changes: * GStreamer 1.14.4 * Mozilla Thunderbird 60.2.1 * KDE Applications 18.08.2 * Linux kernel 4.18.13 * gpgme 1.12.0 * go 1.11.1 And Stagings are busily molding these updates into usable updates: * GNOME 3.30 (likely to ship next week, but with GDM 3.28.x as we faced issues with autologin with the 3.30 branch) * KDE Frameworks 5.51.0 * glibc 2.28, Python 3.7, openssl 1.1.1: the three all interdepend on each other and cause a bunch of new failures – See Staging:C * LLVM 7 * Even more recent Linux kernels * Mesa 18.2.x (VLC crashes need to be investigated) Cheers, Dominique

1 0

[opensuse-factory] New Tumbleweed snapshot 20181015 released!
by Dominique Leuenberger 18 Oct '18

18 Oct '18

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: akonadi-calendar (18.08.1 -> 18.08.2) akonadi-calendar-tools (18.08.1 -> 18.08.2) akonadi-contact (18.08.1 -> 18.08.2) akonadi-import-wizard (18.08.1 -> 18.08.2) akonadi-mime (18.08.1 -> 18.08.2) akonadi-notes (18.08.1 -> 18.08.2) akonadi-search (18.08.1 -> 18.08.2) akonadi-server (18.08.1 -> 18.08.2) akregator (18.08.1 -> 18.08.2) apache-pdfbox (1.8.15 -> 1.8.16) ark (18.08.1 -> 18.08.2) baloo5-widgets (18.08.1 -> 18.08.2) calendarsupport (18.08.1 -> 18.08.2) dolphin (18.08.1 -> 18.08.2) dragonplayer (18.08.1 -> 18.08.2) eventviews (18.08.1 -> 18.08.2) grantleetheme (18.08.1 -> 18.08.2) gwenview5 (18.08.1 -> 18.08.2) ibus-libpinyin (1.10.0 -> 1.10.91) ibus-table (1.9.17 -> 1.9.21) imlib2 (1.4.10 -> 1.5.1) incidenceeditor (18.08.1 -> 18.08.2) kaccounts-integration (18.08.1 -> 18.08.2) kaccounts-providers (18.08.1 -> 18.08.2) kaddressbook (18.08.1 -> 18.08.2) kalarmcal (18.08.1 -> 18.08.2) kamera (18.08.1 -> 18.08.2) kate (18.08.1 -> 18.08.2) kcalc (18.08.1 -> 18.08.2) kcalcore (18.08.1 -> 18.08.2) kcalutils (18.08.1 -> 18.08.2) kcharselect (18.08.1 -> 18.08.2) kcolorchooser (18.08.1 -> 18.08.2) kcontacts (18.08.1 -> 18.08.2) kdav (18.08.1 -> 18.08.2) kdenetwork4-filesharing (18.08.1 -> 18.08.2) kdepim-addons (18.08.1 -> 18.08.2) kdepim-apps-libs (18.08.1 -> 18.08.2) kdepim-runtime (18.08.1 -> 18.08.2) kdialog (18.08.1 -> 18.08.2) kdump kernel-source (4.18.12 -> 4.18.13) khelpcenter5 (18.08.1 -> 18.08.2) kidentitymanagement (18.08.1 -> 18.08.2) kimap (18.08.1 -> 18.08.2) kio-extras5 (18.08.1 -> 18.08.2) kio_audiocd (18.08.1 -> 18.08.2) kitinerary (18.08.1 -> 18.08.2) kldap (18.08.1 -> 18.08.2) kleopatra (18.08.1 -> 18.08.2) kmag (18.08.1 -> 18.08.2) kmail (18.08.1 -> 18.08.2) kmail-account-wizard (18.08.1 -> 18.08.2) kmailtransport (18.08.1 -> 18.08.2) kmbox (18.08.1 -> 18.08.2) kmime (18.08.1 -> 18.08.2) kmousetool (18.08.1 -> 18.08.2) knotes (18.08.1 -> 18.08.2) kompare (18.08.1 -> 18.08.2) konsole (18.08.1 -> 18.08.2) kontact (18.08.1 -> 18.08.2) kontactinterface (18.08.1 -> 18.08.2) kopete (18.08.1 -> 18.08.2) korganizer (18.08.1 -> 18.08.2) kpimtextedit (18.08.1 -> 18.08.2) kpkpass (18.08.1 -> 18.08.2) krita (4.1.3 -> 4.1.5) kruler (18.08.1 -> 18.08.2) ksmtp (18.08.1 -> 18.08.2) ktnef (18.08.1 -> 18.08.2) kwalletmanager5 (18.08.1 -> 18.08.2) libdrm (2.4.93 -> 2.4.95) libgravatar (18.08.1 -> 18.08.2) libkcddb (18.08.1 -> 18.08.2) libkcompactdisc (18.08.1 -> 18.08.2) libkdcraw (18.08.1 -> 18.08.2) libkdepim (18.08.1 -> 18.08.2) libkexiv2 (18.08.1 -> 18.08.2) libkgapi (18.08.1 -> 18.08.2) libkipi (18.08.1 -> 18.08.2) libkleo (18.08.1 -> 18.08.2) libkomparediff2 (18.08.1 -> 18.08.2) libksane (18.08.1 -> 18.08.2) libksieve (18.08.1 -> 18.08.2) libksysguard5 libqt5-qtbase mailcommon (18.08.1 -> 18.08.2) mailimporter (18.08.1 -> 18.08.2) messagelib (18.08.1 -> 18.08.2) mobipocket (18.08.1 -> 18.08.2) okular (18.08.1 -> 18.08.2) open-vm-tools ovmf (2018+git1534736099.43fe4c405292 -> 2018+git1538590187.c0b1f749ef13) perl-Crypt-OpenSSL-RSA (0.28 -> 0.31) perl-Crypt-OpenSSL-Random (0.11 -> 0.15) perl-SGMLS (1.03ii -> 1.1) pimcommon (18.08.1 -> 18.08.2) plasma-framework plasma5-desktop python-jedi (0.12.1 -> 0.13.1) python-paramiko (2.4.1 -> 2.4.2) spectacle (18.08.1 -> 18.08.2) subversion (1.10.2 -> 1.10.3) === Details === ==== akonadi-calendar ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-calendar-lang akonadi-plugin-calendar libKF5AkonadiCalendar5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== akonadi-calendar-tools ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-calendar-tools-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== akonadi-contact ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-contact-lang akonadi-plugin-contacts libKF5AkonadiContact5 libKF5ContactEditor5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== akonadi-import-wizard ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-import-wizard-lang libKPimImportWizard5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== akonadi-mime ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-mime-lang akonadi-plugin-mime libKF5AkonadiMime5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== akonadi-notes ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-notes-lang libKF5AkonadiNotes5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== akonadi-search ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-search-lang libKF5AkonadiSearch - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== akonadi-server ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-server-lang akonadi-server-sqlite libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiPrivate5 libKF5AkonadiWidgets5 libKF5AkonadiXml5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Job tracker: fix expected reply signature, improve error handling * Fix icon name * Fix "QCoreApplication::postEvent: Unexpected null receiver" warnings ==== akregator ==== Version update (18.08.1 -> 18.08.2) Subpackages: akregator-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== apache-pdfbox ==== Version update (1.8.15 -> 1.8.16) - Update to 1.8.16: * [PDFBOX-4261] - Invalidated signature signing pdf twice * [PDFBOX-4276] - Multiply blend mode not detected * [PDFBOX-4283] - Allowing Rectangles with additional elements * [PDFBOX-4298] - NullPointerException when doing overlay * [PDFBOX-4316] - RemoveAllText does not delete all parameters with " operator * [PDFBOX-4274] - Get rid of warning about prerequisites * Improve skip duplicates (bsc#1111009, CVE-2018-11797) - Adjust fix-version.patch ==== ark ==== Version update (18.08.1 -> 18.08.2) Subpackages: ark-lang libkerfuffle18 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Downgrade warning to debug. ==== baloo5-widgets ==== Version update (18.08.1 -> 18.08.2) Subpackages: baloo5-widgets-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== calendarsupport ==== Version update (18.08.1 -> 18.08.2) Subpackages: calendarsupport-lang libKF5CalendarSupport5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== dolphin ==== Version update (18.08.1 -> 18.08.2) Subpackages: dolphin-part dolphin-part-lang libdolphinvcs5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * [PlacesItemModelTest] More index-related fixes * [PlacesItemModel] Fix testSystemItems() * [PlacesItemModelTest] Fix testHideItem() * [PlacesItemModelTest] Fix testTearDownDevice() * [PlacesItemModelTest] Fix testDeletePlace() * [PlacesItemModelTest] Fix testGroups() test case * Follow-up of commit 9760f9607d * [PlacesItemModelTest] Check whether Desktop and Download folders exist * Fix disabling of DolphinNewFileMenu * Add test cases for enabled status of DolphinNewFileMenu * Fix that dragging a file can trigger inline rename. (kde#398375) * Don't assign twice the same key to the action New Tab (kde#398324) * Do use QIcon::Selected for non-icon view * [KStandardItemListWidget] Round to icon size before applying scaling * Correctly save behaviourOnLaunch (kde#398022) * Don't use QIcon::Selected state for selected icon (kde#398014) - Dropped patches, now upstream: * Fix-that-dragging-a-file-can-trigger-inline-rename.patch * Dont-assign-twice-the-same-key-to-the-action-New-Tab.patch ==== dragonplayer ==== Version update (18.08.1 -> 18.08.2) Subpackages: dragonplayer-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== eventviews ==== Version update (18.08.1 -> 18.08.2) Subpackages: eventviews-lang libKF5EventViews5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== grantleetheme ==== Version update (18.08.1 -> 18.08.2) Subpackages: grantleetheme-lang libKF5GrantleeTheme5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== gwenview5 ==== Version update (18.08.1 -> 18.08.2) Subpackages: gwenview5-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Fix orientation when saving/transforming JPEG images * Set file name on print job (kde#332207) ==== ibus-libpinyin ==== Version update (1.10.0 -> 1.10.91) - Update version to 1.10.91 * Support ime.register_trigger in lua extension * Support predicted candidates * Support emoji input ==== ibus-table ==== Version update (1.9.17 -> 1.9.21) - Update version to 1.9.21 * Migrate IBusConfig to GSettings. * Add a test suite * Add missing tags to ibus-table-createdb.sgml. * Draw InputMode text instead of icon into panel on non-Gnome desktops. * Make it work with Python2 again * Sync phrases cache from/to external storage. * Update translations from zanata * validate ibus-table.appdata.xml in %%check * Update translations from zanata (pt_BR updated, es new) * Don't query user database if user define phrase and dynamic adjust are disabled (thanks to heiher) * Enable hash map based cache for user database enabled * Import hash map based cache for table database (thanks to heiher) * Install appstream metadata to /usr/share/metainfo/ (thanks to jbicha) * Fix some appdata validation issues (thanks to jbicha) * Fix bug in Unihan_Variants.txt, ? U+8457 is both simplified and traditional Chinese (thanks to heiher) ==== imlib2 ==== Version update (1.4.10 -> 1.5.1) - Update to 1.5.1 * Fix build without HAVE_X11_SHM_FD (T6752) * XPM loader: Fix potential use of uninitialized value (T6746) * BMP loader: Fix infinite loop with invalid bmp images (T6749) * PNM loader: Simplify (fixing ASCII format parsing issues T6751) * Maximum image dimension should be 32767, not 32766 * PNG loader: Correct various error handling cases * Cleanups, maintenance. - imlib2 1.5.0: * XPM loader: Fix incorrect image invalidation. * Add support for MIT-SHM FD-passing (Alexander Volkov) * Fix potential OOB memory access if border elements are negative or sizes exceed image dimensions * Expose XImage cache control functions * Various enhancements, maintenance. ==== incidenceeditor ==== Version update (18.08.1 -> 18.08.2) Subpackages: incidenceeditor-lang libKF5IncidenceEditor5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kaccounts-integration ==== Version update (18.08.1 -> 18.08.2) Subpackages: kaccounts-integration-lang libkaccounts1 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kaccounts-providers ==== Version update (18.08.1 -> 18.08.2) Subpackages: kaccounts-providers-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kaddressbook ==== Version update (18.08.1 -> 18.08.2) Subpackages: kaddressbook-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kalarmcal ==== Version update (18.08.1 -> 18.08.2) Subpackages: akonadi-plugin-kalarmcal kalarmcal-lang libKF5AlarmCalendar5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Add KADateTime::msecsTo() ==== kamera ==== Version update (18.08.1 -> 18.08.2) Subpackages: kamera-lang kio_kamera - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kate ==== Version update (18.08.1 -> 18.08.2) Subpackages: kate-lang kate-plugins - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kcalc ==== Version update (18.08.1 -> 18.08.2) Subpackages: kcalc-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Allow shortcut keys for both decimal separators point and comma (kde#357824) ==== kcalcore ==== Version update (18.08.1 -> 18.08.2) - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kcalutils ==== Version update (18.08.1 -> 18.08.2) Subpackages: kcalutils-lang libKF5CalendarUtils5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kcharselect ==== Version update (18.08.1 -> 18.08.2) Subpackages: kcharselect-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kcolorchooser ==== Version update (18.08.1 -> 18.08.2) Subpackages: kcolorchooser-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kcontacts ==== Version update (18.08.1 -> 18.08.2) Subpackages: kcontacts-lang libKF5Contacts5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kdav ==== Version update (18.08.1 -> 18.08.2) Subpackages: kdav-lang libKPimKDAV5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kdenetwork4-filesharing ==== Version update (18.08.1 -> 18.08.2) Subpackages: kdenetwork4-filesharing-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * allow building with packagekit-qt >= 1.0.0 (kde#390599) ==== kdepim-addons ==== Version update (18.08.1 -> 18.08.2) Subpackages: kdepim-addons-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kdepim-apps-libs ==== Version update (18.08.1 -> 18.08.2) Subpackages: kdepim-apps-libs-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Fix Bug 399074 - Untranslatable strings in kdepim-apps-libs/kaddressbookimportexport/src/ (kde#399074) ==== kdepim-runtime ==== Version update (18.08.1 -> 18.08.2) Subpackages: kdepim-runtime-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Remove not necessary header when we send mail * Maildispatcher: escape '<' and '>' in error messages. * Fix compilation with Qt 5.12 ==== kdialog ==== Version update (18.08.1 -> 18.08.2) Subpackages: kdialog-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kdump ==== - kdump-turn-off-NUMA-in-kdump-kernel.patch: Turn off NUMA in the kdump kernel (bsc#1109784, bsc#1102609). - kdump-fadump-add-udev-support.patch: fadump: add udev event support for fadump (bsc#1108170). - kdump-fadump-avoid-multipath-optimizations.patch: fadump: avoid multipath optimizations that break regular boot (bsc#1101730). - kdump-split-cmdline-purpose-wise.patch: cmdline: split kdump cmdline purpose wise (bsc#1101730). - kdump-fadump-fix-network-bring-up.patch: fadump: fix network bring up issue during default boot (bsc#1101730). ==== kernel-source ==== Version update (4.18.12 -> 4.18.13) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Linux 4.18.13 (bnc#1012628). - Revert "drm/amd/pp: Send khz clock values to DC for smu7/8" (bnc#1012628). - dm thin metadata: fix __udivdi3 undefined on 32-bit (bnc#1012628). - ixgbe: check return value of napi_complete_done() (bnc#1012628). - HID: i2c-hid: disable runtime PM operations on hantick touchpad (bnc#1012628). - ocfs2: fix locking for res->tracking and dlm->tracking_list (bnc#1012628). - proc: restrict kernel stack dumps to root (bnc#1012628). - tools: hv: fcopy: set 'error' in case an unknown operation was requested (bnc#1012628). - Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect() (bnc#1012628). - gpiolib: Free the last requested descriptor (bnc#1012628). - crypto: caam/jr - fix ablkcipher_edesc pointer arithmetic (bnc#1012628). - crypto: mxs-dcp - Fix wait logic on chan threads (bnc#1012628). - crypto: chelsio - Fix memory corruption in DMA Mapped buffers (bnc#1012628). - crypto: qat - Fix KASAN stack-out-of-bounds bug in adf_probe() (bnc#1012628). - ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760 (bnc#1012628). - iommu/amd: Clear memory encryption mask from physical address (bnc#1012628). - smb2: fix missing files in root share directory listing (bnc#1012628). - cpufreq: qcom-kryo: Fix section annotations (bnc#1012628). - firmware: Always initialize the fw_priv list object (bnc#1012628). - firmware: Fix security issue with request_firmware_into_buf() (bnc#1012628). - b43: fix DMA error related regression with proprietary firmware (bnc#1012628). - sysfs: Do not return POSIX ACL xattrs via listxattr (bnc#1012628). - ovl: fix format of setxattr debug (bnc#1012628). - ovl: fix memory leak on unlink of indexed file (bnc#1012628). - ovl: fix access beyond unterminated strings (bnc#1012628). - ovl: set I_CREATING on inode being created (bnc#1012628). - vfs: don't evict uninitialized inode (bnc#1012628). - new primitive: discard_new_inode() (bnc#1012628). - x86/APM: Fix build warning when PROC_FS is not enabled (bnc#1012628). - xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage (bnc#1012628). - xen: avoid crash in disable_hotplug_cpu (bnc#1012628). - xen/manage: don't complain about an empty value in control/sysrq node (bnc#1012628). - asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO (bnc#1012628). - cifs: read overflow in is_valid_oplock_break() (bnc#1012628). - s390/qeth: don't dump past end of unknown HW header (bnc#1012628). - s390/qeth: use vzalloc for QUERY OAT buffer (bnc#1012628). - r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED (bnc#1012628). - drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk (bnc#1012628). - arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto" (bnc#1012628). - drm/amdgpu: Fix SDMA hang in prt mode v2 (bnc#1012628). - hexagon: modify ffs() and fls() to return int (bnc#1012628). - commit c434d5c - arch/hexagon: fix kernel/dma.c build warning (bnc#1012628). - commit b07518e - netfilter: xt_hashlimit: use s->file instead of s->private (bnc#1012628). - netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT (bnc#1012628). - dm thin metadata: try to avoid ever aborting transactions (bnc#1012628). - sched/topology: Set correct NUMA topology type (bnc#1012628). - perf/x86/intel: Add support/quirk for the MISPREDICT bit on Knights Landing CPUs (bnc#1012628). - net: ena: fix missing calls to READ_ONCE (bnc#1012628). - net: ena: fix missing lock during device destruction (bnc#1012628). - net: ena: fix potential double ena_destroy_device() (bnc#1012628). - net: ena: fix device destruction to gracefully free resources (bnc#1012628). - net: ena: fix driver when PAGE_SIZE == 64kB (bnc#1012628). - net: ena: fix surprise unplug NULL dereference kernel crash (bnc#1012628). - fs/cifs: suppress a string overflow warning (bnc#1012628). - r8169: set TxConfig register after TX / RX is enabled, just like RxConfig (bnc#1012628). - dm raid: fix RAID leg rebuild errors (bnc#1012628). - dm raid: fix rebuild of specific devices by updating superblock (bnc#1012628). - dm raid: fix stripe adding reshape deadlock (bnc#1012628). - drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panels (bnc#1012628). - drm/nouveau/disp: fix DP disable race (bnc#1012628). - drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS (bnc#1012628). - drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointer (bnc#1012628). - drm/nouveau: fix oops in client init failure path (bnc#1012628). - dm raid: fix reshape race on small devices (bnc#1012628). - HID: i2c-hid: Don't reset device upon system resume (bnc#1012628). - net/mlx5: Consider PCI domain in search for next dev (bnc#1012628). - bnxt_re: Fix couple of memory leaks that could lead to IOMMU call traces (bnc#1012628). - nvmet-rdma: fix possible bogus dereference under heavy load (bnc#1012628). - USB: yurex: Check for truncation in yurex_read() (bnc#1012628). - usb: host: xhci-plat: Iterate over parent nodes for finding quirks (bnc#1012628). - HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub report (bnc#1012628). - riscv: Do not overwrite initrd_start and initrd_end (bnc#1012628). - RDMA/ucma: check fd type in ucma_migrate_id() (bnc#1012628). - iio: imu: st_lsm6dsx: take into account ts samples in wm configuration (bnc#1012628). - Revert "iio: temperature: maxim_thermocouple: add MAX31856 part" (bnc#1012628). - netfilter: nf_tables: release chain in flushing set (bnc#1012628). - netfilter: kconfig: nat related expression depend on nftables core (bnc#1012628). - perf annotate: Fix parsing aarch64 branch instructions after objdump update (bnc#1012628). - perf probe powerpc: Ignore SyS symbols irrespective of endianness (bnc#1012628). - perf util: Fix bad memory access in trace info (bnc#1012628). - perf evsel: Fix potential null pointer dereference in perf_evsel__new_idx() (bnc#1012628). - perf annotate: Properly interpret indirect call (bnc#1012628). - commit 342ac1f - scsi: qedi: Add the CRC size within iSCSI NVM image (bnc#1012628). - scsi: iscsi: target: Fix conn_ops double free (bnc#1012628). - scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values fails (bnc#1012628). - HID: hid-saitek: Add device ID for RAT 7 Contagion (bnc#1012628). - usb: gadget: fotg210-udc: Fix memory leak of fotg210->ep[i] (bnc#1012628). - HID: add support for Apple Magic Keyboards (bnc#1012628). - HID: intel-ish-hid: Enable Sunrise Point-H ish driver (bnc#1012628). - netfilter: xt_checksum: ignore gso skbs (bnc#1012628). - netfilter: xt_cluster: add dependency on conntrack module (bnc#1012628). - bpf: 32-bit RSH verification must truncate input before the ALU op (bnc#1012628). - mm: madvise(MADV_DODUMP): allow hugetlbfs pages (bnc#1012628). - afs: Fix cell specification to permit an empty address list (bnc#1012628). - firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero (bnc#1012628). - ceph: avoid a use-after-free in ceph_destroy_options() (bnc#1012628). - nds32: linker script: GCOV kernel may refers data in __exit (bnc#1012628). - tools/vm/page-types.c: fix "defined but not used" warning (bnc#1012628). - tools/vm/slabinfo.c: fix sign-compare warning (bnc#1012628). - nds32: fix build error because of wrong semicolon (bnc#1012628). - nds32: Fix get_user/put_user macro expand pointer problem (bnc#1012628). - nds32: Fix empty call trace (bnc#1012628). - nds32: add NULL entry to the end of_device_id array (bnc#1012628). - nds32: fix logic for module (bnc#1012628). - net/ibm/emac: wrong emac_calc_base call was used by typo (bnc#1012628). - fsnotify: fix ignore mask logic in fsnotify() (bnc#1012628). - mac80211: shorten the IBSS debug messages (bnc#1012628). - mac80211: don't Tx a deauth frame if the AP forbade Tx (bnc#1012628). - mac80211: Fix station bandwidth setting after channel switch (bnc#1012628). - mac80211: fix a race between restart and CSA flows (bnc#1012628). - mac80211: fix WMM TXOP calculation (bnc#1012628). - cfg80211: fix a type issue in ieee80211_chandef_to_operating_class() (bnc#1012628). - mac80211: fix an off-by-one issue in A-MSDU max_subframe computation (bnc#1012628). - fs/cifs: don't translate SFM_SLASH (U+F026) to backslash (bnc#1012628). - net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx() (bnc#1012628). - i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP (bnc#1012628). - i2c: uniphier: issue STOP only for last message or I2C_M_STOP (bnc#1012628). - bpf: avoid misuse of psock when TCP_ULP_BPF collides with another ULP (bnc#1012628). - bpf: Fix bpf_msg_pull_data() (bnc#1012628). - ibmvnic: Include missing return code checks in reset function (bnc#1012628). - selftests: pmtu: detect correct binary to ping ipv6 addresses (bnc#1012628). - selftests: pmtu: maximum MTU for vti4 is 2^16-1-20 (bnc#1012628). - RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0 (bnc#1012628). - md/raid5-cache: disable reshape completely (bnc#1012628). - Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()" (bnc#1012628). - ARC: atomics: unbork atomic_fetch_##op() (bnc#1012628). - gpio: Fix crash due to registration race (bnc#1012628). - tools/kvm_stat: fix updates for dead guests (bnc#1012628). - tools/kvm_stat: fix handling of invalid paths in debugfs provider (bnc#1012628). - tools/kvm_stat: fix python3 issues (bnc#1012628). - mac80211: always account for A-MSDU header changes (bnc#1012628). - mac80211: do not convert to A-MSDU if frag/subframe limited (bnc#1012628). - cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IE (bnc#1012628). - tc-testing: add test-cases for numeric and invalid control action (bnc#1012628). - net: mvpp2: initialize port of_node pointer (bnc#1012628). - sh_eth: Add R7S9210 support (bnc#1012628). - net: hns: add netif_carrier_off before change speed and duplex (bnc#1012628). - net: hns: add the code for cleaning pkt in chip (bnc#1012628). - tipc: switch to rhashtable iterator (bnc#1012628). - bpf: fix sg shift repair start offset in bpf_msg_pull_data (bnc#1012628). - bpf: fix shift upon scatterlist ring wrap-around in bpf_msg_pull_data (bnc#1012628). - bpf: fix msg->data/data_end after sg shift repair in bpf_msg_pull_data (bnc#1012628). - gpio: dwapb: Fix error handling in dwapb_gpio_probe() (bnc#1012628). - gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall (bnc#1012628). - gpiolib: acpi: Switch to cansleep version of GPIO library call (bnc#1012628). - mac80211: avoid kernel panic when building AMSDU from non-linear SKB (bnc#1012628). - mac80211: mesh: fix HWMP sequence numbering to follow standard (bnc#1012628). - gpio: adp5588: Fix sleep-in-atomic-context bug (bnc#1012628). - bpf: fix several offset tests in bpf_msg_pull_data (bnc#1012628). - nl80211: Pass center frequency in kHz instead of MHz (bnc#1012628). - nl80211: Fix nla_put_u8 to u16 for NL80211_WMMR_TXOP (bnc#1012628). - mac80211_hwsim: Fix possible Spectre-v1 for hwsim_world_regdom_custom (bnc#1012628). - cfg80211: make wmm_rule part of the reg_rule structure (bnc#1012628). - mac80211_hwsim: correct use of IEEE80211_VHT_CAP_RXSTBC_X (bnc#1012628). - mac80211: correct use of IEEE80211_VHT_CAP_RXSTBC_X (bnc#1012628). - bpf: sockmap, decrement copied count correctly in redirect error case (bnc#1012628). - bpf, sockmap: fix psock refcount leak in bpf_tcp_recvmsg (bnc#1012628). - bpf, sockmap: fix potential use after free in bpf_tcp_close (bnc#1012628). - scsi: aacraid: fix a signedness bug (bnc#1012628). - scsi: libata: Add missing newline at end of file (bnc#1012628). - scsi: csiostor: fix incorrect port capabilities (bnc#1012628). - scsi: csiostor: add a check for NULL pointer after kmalloc() (bnc#1012628). - btrfs: btrfs_shrink_device should call commit transaction at the end (bnc#1012628). - cfg80211: remove division by size of sizeof(struct ieee80211_wmm_rule) (bnc#1012628). - KVM: PPC: Book3S HV: Don't truncate HPTE index in xlate function (bnc#1012628). - Btrfs: fix unexpected failure of nocow buffered writes after snapshotting when low on space (bnc#1012628). - mac80211_hwsim: require at least one channel (bnc#1012628). - mac80211: Run TXQ teardown code before de-registering interfaces (bnc#1012628). - rseq/selftests: fix parametrized test with -fpie (bnc#1012628). - commit 37173f2 ==== khelpcenter5 ==== Version update (18.08.1 -> 18.08.2) Subpackages: khelpcenter5-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kidentitymanagement ==== Version update (18.08.1 -> 18.08.2) Subpackages: kidentitymanagement-lang libKF5IdentityManagement5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Add signal when identity is not found ==== kimap ==== Version update (18.08.1 -> 18.08.2) Subpackages: kimap-lang libKF5IMAP5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kio-extras5 ==== Version update (18.08.1 -> 18.08.2) Subpackages: kio-extras5-lang libkioarchive5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kio_audiocd ==== Version update (18.08.1 -> 18.08.2) Subpackages: kio_audiocd-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Use the right version of kcmshell (kde#398368) ==== kitinerary ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKPimItinerary5 libKPimItinerary5-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kldap ==== Version update (18.08.1 -> 18.08.2) Subpackages: kldap-lang libKF5Ldap5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Fix "finished() called after error()!" warning. ==== kleopatra ==== Version update (18.08.1 -> 18.08.2) Subpackages: kleopatra-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kmag ==== Version update (18.08.1 -> 18.08.2) Subpackages: kmag-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kmail ==== Version update (18.08.1 -> 18.08.2) Subpackages: kmail-application-icons kmail-lang ktnef - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Don't show quota page when quota max < 0 * Allow to restore with mailtransportname and identity name. * Initialize with identity * Emit signal when identity is not found * Fix use identity, it will select correct send folder now. * Fix Bug 397937 - Kmail wrong trash icon (kde#397937) ==== kmail-account-wizard ==== Version update (18.08.1 -> 18.08.2) Subpackages: kmail-account-wizard-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kmailtransport ==== Version update (18.08.1 -> 18.08.2) Subpackages: kmailtransport-lang libKF5MailTransport5 libKF5MailTransportAkonadi5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * When instance is invalide return directly ==== kmbox ==== Version update (18.08.1 -> 18.08.2) - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kmime ==== Version update (18.08.1 -> 18.08.2) Subpackages: kmime-lang libKF5Mime5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kmousetool ==== Version update (18.08.1 -> 18.08.2) Subpackages: kmousetool-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== knotes ==== Version update (18.08.1 -> 18.08.2) Subpackages: knotes-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kompare ==== Version update (18.08.1 -> 18.08.2) Subpackages: kompare-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== konsole ==== Version update (18.08.1 -> 18.08.2) Subpackages: konsole-part konsole-part-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kontact ==== Version update (18.08.1 -> 18.08.2) Subpackages: kontact-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kontactinterface ==== Version update (18.08.1 -> 18.08.2) Subpackages: kontactinterface-lang libKF5KontactInterface5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Disable Chromium's crash handler ==== kopete ==== Version update (18.08.1 -> 18.08.2) Subpackages: kopete-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== korganizer ==== Version update (18.08.1 -> 18.08.2) Subpackages: korganizer-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kpimtextedit ==== Version update (18.08.1 -> 18.08.2) Subpackages: kpimtextedit-lang libKF5PimTextEdit5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Don't install this header ==== kpkpass ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKPimPkPass5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== krita ==== Version update (4.1.3 -> 4.1.5) Subpackages: krita-lang - Update to 4.1.5: (4.1.4 has been skipped) * See https://krita.org/en/item/krita-4-1-5-released/ * Associate Krita with .ico files * Auto-update the device pixel ration when changing screens * Disable autoscrolling for the pan tool * Disable drag & drop in the recent documents list (kde#399397) * Disable zoom-in/out actions when editing text in rich-text mode (kde#399157) * Do not add template files to recent documents list (kde#398877) * Do not allow creating masks on locked layers (kde#399145) * Do not close the settings dialog when pressing enter while searching for a shortcut (kde#399116) * Fill polyline shapes if some fill style was selected (kde#399135) * Fix Tangent Normal paintop to work with 16 and 32 bit floating point images (kde#398826) * Fix a blending issue with the color picker when picking a color for the first time (kde#394399) * Fix a problem with namespaces when loading SVG * Fix an assert when right-clicking the animation timeline (kde#399435) * Fix autohiding the color selector popup * Fix canvas scaling in hidpi mode (kde#360541) * Fix deleting canvas input settings shortcuts (kde#385662) * Fix loading multiline text with extra mark-up (kde#399227) * Fix loading of special unicode whitespace characters (kde#392710) * Fix loading the alpha channel from Photoshop TIFF files (kde#376950) * Fix missing shortcut from Fill Tool tooltip (kde#399111) * Fix projection update after undoing create layer (kde#399575) * Fix saving layer lock, alpha lock and alpha inheritance (kde#399513) * Fix saving the location of audio source files in .kra files * Fix selections and transform tool overlay when Mirror Axis is active (kde#395222) * Fix setting active session after creating a new one * Fix showing the color selector popup in hover mode * Fix the ctrl-w close window shortcut on Windows (kde#399339) * Fix the overview docker (kde#396922, kde#384033) * Fix the shift-I color selector shortcut * Fix unsuccessful restoring of a session blocking Krita from closing (kde#399203) * Import SVG files as vector layers instead of pixel layers (kde#399166) * Improve spacing between canvas input setting categories * Make Krita merge layers correctly if the order of selecting layers is not top-down (kde#399146) * Make it possible to select the SVG text tool text has been moved inside an hidden group and then made visible again (kde#395412) * Make the color picker pick the alpha channel value correctly (kde#399169) * Prevent opening filter dialogs on non-editable layers (kde#398915) * Reset the brush preset selection docker on creating a new document (kde#399340) * Support fractional display scaling factors * Update color history after fill (kde#379199) - Update fix-build-with-Qt5.6.patch yet again to fix a new compilation error with Qt 5.6 (kde#399677), the previous one is fixed in this release ==== kruler ==== Version update (18.08.1 -> 18.08.2) Subpackages: kruler-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== ksmtp ==== Version update (18.08.1 -> 18.08.2) Subpackages: ksmtp-lang libKPimSMTP5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== ktnef ==== Version update (18.08.1 -> 18.08.2) Subpackages: ktnef-lang libKF5Tnef5 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== kwalletmanager5 ==== Version update (18.08.1 -> 18.08.2) Subpackages: kwalletmanager5-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libdrm ==== Version update (2.4.93 -> 2.4.95) Subpackages: libdrm-devel libdrm2 libdrm_amdgpu1 libdrm_intel1 libdrm_nouveau2 libdrm_radeon1 - Update to version 2.4.95 * This release adds a fallback for realpath() which was blocked by the web-browser sand-boxing. While the browsers are fixed-up they seem to have little incentive to roll bugfix releases :-\ ==== libgravatar ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5Gravatar5 libgravatar-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libkcddb ==== Version update (18.08.1 -> 18.08.2) - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libkcompactdisc ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5CompactDisc5 libkcompactdisc-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libkdcraw ==== Version update (18.08.1 -> 18.08.2) - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libkdepim ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5Libkdepim5 libKF5LibkdepimAkonadi5 libkdepim-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libkexiv2 ==== Version update (18.08.1 -> 18.08.2) - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libkgapi ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKPimGAPICalendar5 libKPimGAPIContacts5 libKPimGAPICore5 libKPimGAPITasks5 libkgapi-lang sasl2-kdexoauth2 - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Fix compilation with Qt 5.12 ==== libkipi ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5Kipi32_0_0 libkipi-data - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libkleo ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5Libkleo5 libkleo-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libkomparediff2 ==== Version update (18.08.1 -> 18.08.2) Subpackages: libkomparediff2-5 libkomparediff2-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libksane ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5Sane5 libksane-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libksieve ==== Version update (18.08.1 -> 18.08.2) Subpackages: libksieve-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== libksysguard5 ==== Subpackages: libksysguard5-helper libksysguard5-lang - Add patch to use WebEngine instead of WebKit: * 0001-Port-scripting-to-Qt-WebEngine.patch - Use gcc7 on Leap 42.3 ==== libqt5-qtbase ==== Subpackages: libQt5Concurrent5 libQt5Core5 libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5OpenGL5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-sqlite libQt5Test5 libQt5Widgets5 libQt5Xml5 libqt5-qtbase-platformtheme-gtk3 - Add patch to fix boo#1096328, printer settings not remembered: * 0001-Unix-print-dialog-Properly-initialize-duplex.patch ==== mailcommon ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5MailCommon5 mailcommon-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== mailimporter ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5MailImporter5 libKF5MailImporterAkonadi5 mailimporter-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== messagelib ==== Version update (18.08.1 -> 18.08.2) Subpackages: messagelib-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Relicense my code from GPLv2 to GPLv2+ * Define color for openpgp signature * Store transport name and identity name * Don't save X-KMail-Fcc it's redundant * We need theses header when we resend file ==== mobipocket ==== Version update (18.08.1 -> 18.08.2) - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== okular ==== Version update (18.08.1 -> 18.08.2) Subpackages: okular-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * Fine tune opening of archives after last change * Fine tune opening files * Avoid undefined behavior due to dangling file descriptor ==== open-vm-tools ==== Subpackages: libvmtools0 open-vm-tools-desktop - Added Handle Linux kernel /proc FS uint32 type stat overflow when calculating (bsc#1110793). + handle-linux-kernel-stat-overflow.patch On both 32-bit and 64-bit Linux, tools always parses Linux kernel /proc FS stats as uint64 values. For rate stats, current - previous can handle uint64 type stat overflow, but not uint32 type. - Added patch for Optional override for short and long OS names sent from Tools (bsc#1047469). + optional-override-os-name.patch Added support for customers to override the returned long and short OS names through the tools config file. If the setting is present, then names gathered by hostinfo will be ignored. The user is responsible for setting the appropriate names. - Added patch for Workaround for false negative result when detecting cloud-init existance (bsc#1111619) + false-negative-cloud-init.patch "cloud-init -v" cmd is used to detect if cloud-init is properly configured and it works on most linux distros. However in some linux distro like Amazon Linux 2, "cloud-init -v" will print result to stderr instead of stdout and it makes "forkExecAndWaitCommand" give false negative result. 1. added a new bool switch in "ForkExecAndWaitCommand" to choose if we should ignore the stderr output when the return code is 0 2. removed unnecessary reference for "ForkExecAndWaitCommand" in linuxDeploymentUtilities.c 3. trivial change for some formatting ==== ovmf ==== Version update (2018+git1534736099.43fe4c405292 -> 2018+git1538590187.c0b1f749ef13) Subpackages: qemu-ovmf-x86_64 - Update to 2018+git1538590187.c0b1f749ef13 + ShellPkg: Create a homefilesystem environment variable + NetworkPkg/HttpUtilitiesDxe: fix read memory access overflow + NetworkPkg/HttpDxe: fix read memory access overflow in HTTPBoot + PcAtChipsetPkg PcRtc: Use new EfiLocateFirstAcpiTable() + MdeModulePkg S3SaveStateDxe: Use new EfiLocateFirstAcpiTable() + MdePkg UefiLib: Add new EfiLocateXXXAcpiTable() APIs + NetworkPkg/UefiPxeBcDxe: Add the clarification compared to UefiPxeBcDxe in MdeModulePkg + NetworkPkg/IScsiDxe: Add the clarification compared to IScsiDxe in MdeModulePkg + NetworkPkg/TcpDxe: Add the clarification compared to Tcp4Dxe in MdeModulePkg + MdeModulePkg/UefiPxeBcDxe: Add the clarification compared to UefiPxeBcDxe in NetworkPkg + MdeModulePkg/IScsiDxe: Add the clarification compared to IScsiDxe in NetworkPkg + MdeModulePkg/Tcp4Dxe: Add the clarification compared to TcpDxe in NetworkPkg + NetworkPkg/UefiPxeBcDxe: Use the specified MTFTP windowsize + NetworkPkg: Define one PCD for PXE to specify MTFTP windowsize + NetworkPkg/Mtftp6Dxe: Support windowsize in read request operation + MdeModulePke/Mtftp4Dxe: Support windowsize in read request operation + MdePkg/BaseSynchronizationLib: fix XADD operands in GCC IA32/X64 assembly + MdeModulePkg/PciHostBridge: Fix a bug that prevents PMEM access + MdeModulePkg/PciHostBridge: Enhance boundary check in Io/Mem.Read/Write + MdeModulePkg/DxeIpl: support more NX related PCDs + MdeModulePkg: XhciDxe: Prevent illegal memory access in XhcSetHsee + SecurityPkg/TcgStorageOpalLib: Fixed correct user password not works issue + MdeModulePkg/SdMmcPciHcDxe: Execute card detect only for RemovableSlot + MdeModulePkg/SdMmcPciHcDxe: Fix SdMmcHcReset to set only necesery bits + NetworkPkg: UefiPxeBcDxe: Add EXCLUSIVE attribute when opening SNP protocol installed by PXE + BaseTools: Check GUID C structure format + MdeModulePkg: Avoid key notification called more than once + IntelFrameworkModulePkg: Avoid key notification called more than once + MdeModulePkg/Library/DxeHttpLib: Handle the blank value in HTTP header + MdeModulePkg/Ip4Dxe: Sync the direct route entry setting + MdeModulePkg XhciDxe: Set HSEE Bit if SERR# Enable Bit is set + BaseTools: Correct DXE_PCD_DATABASE_INIT + BaseTools: Check PcdNvStoreDefaultValueBuffer + BaseTools: Involve Dec default value to calculate Maxsize + BaseTools: Structure Pcd value override incorrect + BaseTools: Report error for incorrect hex value format + MdeModulePkg/ConPlatform: Support short-form USB device path + UefiCpuPkg/CpuDxe: fix an incorrect bit-wise operation + UefiCpuPkg/CpuDxe: fix ECC reported issues + UefiCpuPkg/CpuMpPei: support stack guard feature + UefiCpuPkg/MpInitLib: fix register restore issue in AP wakeup + UefiCpuPkg/CpuExceptionHandlerLib: support stack switch for PEI exceptions + MdeModulePkg/DxeIpl: disable paging before creating new page table + MdeModulePkg PeiCore: Always use PeiImageRead() function to load PEI image + MdeModulePkg/EhciDxe: factor out EhcIsDebugPortInUse() + BaseTools/PatchCheck.py: Fix error when run with Python3 + BaseTools: Report more clear error message for PCD used in expression + BaseTools: Fix a bug about list the PCD in "not used" section + UefiCpuPkg/MpInitLib: Fix ECC issues + MdeModulePkg/EhciDxe: fix host controller reset condition in BindingStart + BaseTools: Extend the keyword "!include"/"!if" to case-insensitive + MdeModulePkg/Setup: Fix incorrect size used in AllocateCopyPool + MdeModulePkg DxeCore: Handle multiple FV images in one FV file + MdeModulePkg PeiCore: Handle multiple FV images in one FV file + UefiCpuPkg/CpuExceptionHandlerLib: Avoid calling PEI services from AP + CpuExceptionHandlerLib: Add comments to make code more readable + BaseTools: Fixed the PcdValue trailing zero issue + BaseTools: Dynamic Pcd value override from command line + BaseTools: Check pcd DefaultValue and SkuId EBNF + ShellPkg: Update Ifconfig command to accept 32bit subnet mask + MdeModulePkg/Network: Add 32bit subnet mask support for IP4 PXE boot + BaseTools: Clarify a DSC parsing error about PCDs + BaseTools: minimize assignment processing + BaseTools: Refactor to remove functionally equivalent functions + BaseTools: include variable namespace GUIDs of HII PCDs in Guid.xref + ShellPkg/SmbiosView: Update SmbiosView for SMBIOS3.2.0 + UefiCpuPkg/CpuDxe: change level of DEBUG message + UefiCpuPkg/CpuDxe: implement non-stop mode for uefi + UefiCpuPkg/CpuExceptionHandlerLib: Setup single step in #PF handler + MdeModulePkg/MdeModulePkg.dec: add new settings for PCDs + MdePkg: Add the missing spec version information for header files + BaseTools: Fix one expression bug to support ~ operate + BaseTools: Add check only VOID* type Pcd need the maxsize info + MdeModulePkg: Update SMBIOS PCDs to 3.2.0 + MdePkg SmBios.h: Add SMBIOS 3.2.0 definitions + MdeModulePkg/PciBus: Restrict one VGA per HostBridge not Segment + MdeModulePkg/PciBus: Refine ActiveVGADeviceOnTheRootBridge + ArmPkg/PlatformBootManagerLib: fix hotkey of boot option + BaseTools: Use hashlib instead of md5 + BaseTools: remove cmp due to deprecated in python3 + BaseTools: Modify class OrderedListDic + BaseTools: Update Makefile for ECC tool + BaseTools/VfrCompile: honor EXTRA_LDFLAGS + NetworkPkg/TlsAuthConfigDxe: fix TlsCaCertificate attributes retrieval + IntelFrameworkPkg/FrameworkUefiLib: don't special-case EFI_FILE_MODE_CREATE + MdePkg/UefiLib: don't special-case EFI_FILE_MODE_CREATE in OpenMode + Remove redundant variables, functions, library clesses, and GUIDs ==== perl-Crypt-OpenSSL-RSA ==== Version update (0.28 -> 0.31) - Fix autogenerated changes to build again * Drop openssl110.patch (upstream) - updated to 0.31 see /usr/share/doc/packages/perl-Crypt-OpenSSL-RSA/Changes 0.31 Mon Sep 24 2018 - Remove default of SHA256 for RSA keys. This has caused significant problems with downstream modules and it has always been possible to do $key->use_sha256_hash() - updated to 0.30 see /usr/share/doc/packages/perl-Crypt-OpenSSL-RSA/Changes 0.30 Tue May 1 2018 - Working windows library detection - Actively testing on appveyor for windows now. - work correctly on LibreSSL 0.29_03 Mon Apr 16 2018 - Add whirlpool hash support. - Crypt::OpenSSL::Random is now required at comnpile-time. - Use the new interface to RSA_generate_key if available - Add library paths to LIBS from Crypt::OpenSSL::Guess 0.29_02 Sun Apr 15 2018 - Add missing require of Config::OpenSSL::Guess 0.29_01 Fri Apr 13 2018 - Adapt to OpenSSL 1.1.0 (dur-randir) - Move issue tracker to github. - Modernization as in Crypt::OpenSSL::Random. - better MSWin32 hints, fixes MSVC libraries, - more meta tests, - prefer hash mode NID_sha256 over NID_sha1 for sign ==== perl-Crypt-OpenSSL-Random ==== Version update (0.11 -> 0.15) - Fix autogenerated changes to build again - updated to 0.15 see /usr/share/doc/packages/perl-Crypt-OpenSSL-Random/Changes 0.15 2018-04-22 rurban - fix mingw hints for pkg-config support (akiym, PR #7) - updated to 0.14 see /usr/share/doc/packages/perl-Crypt-OpenSSL-Random/Changes 0.14 2018-04-17 rurban - add library paths to LIBS from Crypt::OpenSSL::Guess (akiym, PR #6) - updated to 0.13 see /usr/share/doc/packages/perl-Crypt-OpenSSL-Random/Changes 0.13 2018-04-14 rurban - move Crypt::OpenSSL::Guess to configure dependency. (grinnz, PR #4) - updated to 0.12 see /usr/share/doc/packages/perl-Crypt-OpenSSL-Random/Changes 0.12 2018-04-13 rurban - use Crypt::OpenSSL::Guess to resolve OpenSSL include path, fixes MacOS's homebrew OpenSSL installation problem. (akiym, PR #3) ==== perl-SGMLS ==== Version update (1.03ii -> 1.1) - Fix downgrade issue due to uncommon version name - update to version 1.1 Updated the package to use Module::Build. This should help distribution packagers who commonly patched the old Makefile to rearrange the install. Applied Ardo van Rangelrooij's debian patches - Cleaned spec file with spec-cleaner ==== pimcommon ==== Version update (18.08.1 -> 18.08.2) Subpackages: libKF5PimCommon5 libKF5PimCommonAkonadi5 pimcommon-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== plasma-framework ==== Subpackages: libKF5Plasma5 plasma-framework-components plasma-framework-lang - Add patch to workaround use of Frameworks 5.51 features in Plasma 5.14: * 0001-Support-button-icons-when-present.patch (kde#398626) ==== plasma5-desktop ==== Subpackages: plasma5-desktop-lang - Add patch to fix keyboard input on the desktop: * 0001-Focus-handling-fixes.patch ==== python-jedi ==== Version update (0.12.1 -> 0.13.1) - update to version 0.13.1 * Bugfixes, because tensorflow completions were still slow. - update to version 0.13.0 * A small release. Some bug fixes. * Remove Python 3.3 support. Python 3.3 support has been dropped by the Python foundation. * Default environments are now using the same Python version as the Python process. In 0.12.x, we used to load the latest Python version on the system. * Added ``include_builtins`` as a parameter to usages. * ``goto_assignments`` has a new ``follow_builtin_imports`` parameter that changes the previous behavior slightly. - Remove test_requrements.patch, no longer needed ==== python-paramiko ==== Version update (2.4.1 -> 2.4.2) - update to 2.4.2 - refresh paramiko-test_extend_timeout.patch * Fix exploit (CVE pending) in Paramiko's server mode (not client mode) where hostile clients could trick the server into thinking they were authenticated without actually submitting valid authentication. * Modify protocol message handling such that Transport does not respond to MSG_UNIMPLEMENTED with its own MSG_UNIMPLEMENTED * Updated SSHConfig.lookup <paramiko.config.SSHConfig.lookup> so it returns a new, type-casting-friendly dict subclass (~paramiko.config.SSHConfigDict) in lieu of dict literals. ==== spectacle ==== Version update (18.08.1 -> 18.08.2) Subpackages: spectacle-lang - Update to 18.08.2 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-18.08.2.php - Changes since 18.08.1: * None ==== subversion ==== Version update (1.10.2 -> 1.10.3) Subpackages: libsvn_auth_gnome_keyring-1-0 libsvn_auth_kwallet-1-0 subversion-bash-completion subversion-perl subversion-python subversion-server subversion-tools - Apache Subversion 1.10.3: * Store the HTTPS client cert password * Fix shelving when custom diff command is configured * Fix conflict resolver crashes * Fix conflict resolver endless scan in some cases * Fix "Accept incoming deletion" on locally deleted file * Fix "resolver adds unrelated moves to move target list" * Reject bad PUT before CHECKOUT in v1 HTTP protocol * Let 'svnadmin recover' prune the rep-cache even if disabled * Allow commands like 'svn ci --file X' to work when X is a FIFO * 'svnadmin verify --keep-going --quiet' shows an error summary * Fix error in german translation for 'svn help merge' -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] Can no longer access pipe on cli
by Ianseeks 17 Oct '18

17 Oct '18

On Tuesday, 16 October 2018 15:25:02 BST Daniel Morris wrote: > Have you tried the pipe on the key between Shift & Z? (ie Shift \)? > > Sorry, I sort of touchtype, so not sure the last time I looked down, > but my muscle memory uses the lower key and don't think the one next > to the 1 key has ever "worked" for me. > > Daniel > Damn... yes, that works perfectly - thanks -- opensuse:tumbleweed:20181012 Qt: 5.11.2 KDE Frameworks: 5.50.0 - KDE Plasma: 5.14.0 - kwin 5.14.0 kmail2 5.9.1 - akonadiserver 5.9.1 - Kernel: 4.18.12-1-default - xf86-video-nouveau: 1.0.15 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 13

[opensuse-factory] Can no longer access pipe on cli
by Ianseeks 16 Oct '18

16 Oct '18

Hi Not sure when this started but i no longer have access to the pipe symbol. It only gives me ¬ or ` now. I've got a basic logitech K120 keyboard (104 keys) and its worked fine until now. I checked the konsol profile was still using the default keyboard bindings - it was still the same. I checked systemsettings5/Input Devices config and that was still set to the Generic 104 key layout model. I then checked systemsettings5/Regional Setting/Languages and that was empty so i added Brit English. I'm not sure when this changed to blank as i always change everything regional related when the user is created or soon after if any regional issues occur. I then checked systemsettings5/Regional Setting/Formats to make sure they were all correct and it correctly had UK British English (en_gb) for "Region". But if i toggle the "Detailed Settings" to Off, the "Time" short format changes and the "Measurement Units" change from Metric to Imperial. There is something i don't understand about changing the "measurement units", if you drop the box of options you get all the countries plus "no change" and "Default" - why is it not just "Metric" or "Imperial"? the only way i can get metric is to select "no change". Anyone have any ideas as to what i'm missing in my check list to find to where my "pipe" has gone? regards Ian -- opensuse:tumbleweed:20181012 Qt: 5.11.2 KDE Frameworks: 5.50.0 - KDE Plasma: 5.14.0 - kwin 5.14.0 kmail2 5.9.1 - akonadiserver 5.9.1 - Kernel: 4.18.12-1-default - xf86-video-nouveau: 1.0.15 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] where did libstdc++.la go?
by L A Walsh 16 Oct '18

16 Oct '18

In making a tool, I got libtool: error: cannot find the library '/usr/lib64/../lib64/libstdc++.la' or unhandled argument '/usr/lib64/../lib64/libstdc++.la' So I went to look for it. I can't find it in tumbleweed. What could have happened to it? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] New Tumbleweed snapshot 20181012 released!
by Dominique Leuenberger 15 Oct '18

15 Oct '18

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: MozillaThunderbird (60.0 -> 60.2.1) attr audacity (2.2.2 -> 2.3.0) bison (3.0.5 -> 3.1) claws-mail cracklib-dict-full discover dolphin fipscheck (1.4.1 -> 1.5.0) git (2.19.0 -> 2.19.1) gnome-characters (3.29.91 -> 3.30.0) gpg2 gpgme (1.11.1 -> 1.12.0) gstreamer (1.14.3 -> 1.14.4) gstreamer-editing-services (1.14.2 -> 1.14.4) gstreamer-plugins-bad (1.14.3 -> 1.14.4) gstreamer-plugins-base (1.14.3 -> 1.14.4) gstreamer-plugins-good (1.14.3 -> 1.14.4) gstreamer-plugins-libav (1.14.2 -> 1.14.4) gstreamer-plugins-ugly (1.14.3 -> 1.14.4) gstreamer-rtsp-server (1.14.2 -> 1.14.4) gstreamer-validate (1.14.2 -> 1.14.4) gthumb (3.6.1 -> 3.6.2) hyper-v irqbalance (1.2.0 -> 1.4.0) java-11-openjdk kernel-firmware (20180913 -> 20181001) lcms2 libgit2 (0.27.4 -> 0.27.5) libkgapi libpinyin (2.2.0 -> 2.2.1) libvirt (4.7.0 -> 4.8.0) libzypp (17.7.0 -> 17.7.2) lmdb lynx (2.8.9~dev.16 -> 2.8.9rel.1) neon net-snmp nghttp2 (1.33.0 -> 1.34.0) obs-service-tar_scm (0.9.1.1534504824.0732756 -> 0.9.4.1537959361.56833cb) paprefs (0.9.10+20180501.534d20a -> 1.0) perl-Glib (1.327 -> 1.328) postfix ppp protobuf-c (1.3.0 -> 1.3.1) python-Pillow (5.2.0 -> 5.3.0) python-dbus-python python-gst (1.14.2 -> 1.14.4) python-libvirt-python (4.7.0 -> 4.8.0) readline rpm rsibreak (0.12.8 -> 0.12.9) rubygem-mocha (1.5.0 -> 1.7.0) smartmontools snapper (0.5.6 -> 0.6.1) sqlite3 (3.25.0 -> 3.25.2) tomcat (9.0.5 -> 9.0.10) unbound (1.8.0 -> 1.8.1) vim (8.1.0436 -> 8.1.0451) wicked (0.6.49 -> 0.6.50) xterm (335 -> 337) yast2-instserver (4.1.0 -> 4.1.1) zypper (1.14.11 -> 1.14.12) === Details === ==== MozillaThunderbird ==== Version update (60.0 -> 60.2.1) Subpackages: MozillaThunderbird-translations-common - update to Thunderbird 60.2.1: * Calendar: Default values for the first day of the week and working days are now derived from the selected datetime formatting locale * Calendar: Switch to a Photon-style icon set for all platforms * Fix multiple requests for master password when Google Mail or Calendar OAuth2 is enabled * Fix scrollbar of the address entry auto-complete popup * Fix security info dialog in compose window not showing certificate status * Fix links in the Add-on Manager's search results and theme browsing tabs that opened in external browser * Fix localization not showing the localized name for the "Drafts" and "Sent" folders for certain IMAP providers * Fix replying to a message with an empty subject which inserted Re: twice * Fix spellcheck marks disappeaing erroneously for words with an apostrophe * Calendar: First day of the week can now be set * Calendar: Several fixes related to cutting/deleting of events and email schedulin * Fix date display issues (bsc#1109379) * Fix start-up crash due to folder name with special characters (bsc#1107772) - Security fixes for the Mozilla platform picked up from 60.1 and 60.2 (Firefox ESR releases). In general, these flaws cannot be exploited through email in Thunderbird because scripting is disabled when reading mail, but are potentially risks in browser or browser-like contexts (MFSA 2018-25): * CVE-2018-12377 (bsc#1107343, bmo#1470260) Use-after-free in refresh driver timers * CVE-2018-12378 (bsc#1107343, bmo#1459383) Use-after-free in IndexedDB * CVE-2017-16541 (bsc#1066489, bmo#1412081) Proxy bypass using automount and autofs * CVE-2018-12376 (bmo#69309,bmo#69914,bmo#50989,bmo#80092, bmo#80517,bmo#81093,bmo#78575,bmo#71953,bmo#73161,bmo#66991, bmo#68738,bmo#83120,bmo#67363,bmo#72925,bmo#66577,bmo#67889, bmo#80521,bsc#1107343) Memory safety bugs fixed in Firefox 62 and Firefox ESR 60.2 * CVE-2018-12385 (bsc#1109363, bmo#1490585) Crash in TransportSecurityInfo due to cached data * CVE-2018-12383 (bsc#1107343, bmo#1475775) Setting a master password did not delete unencrypted previously stored passwords ==== attr ==== Subpackages: libattr1 libattr1-32bit - update description for libattr-devel-static to make it less boilerplate - Add libattr-devel-static subpackage ==== audacity ==== Version update (2.2.2 -> 2.3.0) Subpackages: audacity-lang - Add 0001-Fix-bug-1992.patch from git to fix issue 1992 - Update to release 2.3.0 - Rebased audacity-misc-errors.patch and audacity-no_return_in_nonvoid.patch - Added --disable-dynamic-loading build flag for ffmpeg-4 use. - Upstream changes: * New feature ? ?Punch and Roll Recording? * Pinned-play-head can now be repositioned by dragging * Play-at-speed now can be adjusted whilst playing. * Toolbars controlling volume and speed can now be resized for greater precision * New commands: New ?Tools? menu & New ?Scriptables? commands * Nyquist gains AUD-DO command * Nyquist effects are now translatable and translated * More dialogs have help buttons now * Increased legibility of trackname display * Half-wave option for collapsed tracks * Sliding Stretch * Dialog (option) for entering labels * Inconsistent behavior when recording with a selection?bug #1839 * Ctrl + M does not open label for editing ? bug #1852 * Vertical Zoom in by clicking in the vertical Scale, or context menu, in waveform views is inconsistent ? bug #1810 * Deletion of all tracks cannot be undone ? bug #1845 * Timer Record with a selection present can get a truncated recording with data loss ? bug #1851 * Duplicate shortcuts can be created ? bug #1786 * Labels longer than 260 characters are now supported ? bug #1905 * Using Spectrogram Settings in TCP or using Preferences causes Audacity to reset Project Rate to default rate in Quality Preferences ? bug #1977 * Cut Preview should play all selected/sync-locked tracks, respecting Mute/Solo during preview ? bug #231 - Ensure that Leap:42.3 gcc conditional doesn't interfere with Tumbleweed gcc used for build. ==== bison ==== Version update (3.0.5 -> 3.1) Subpackages: bison-lang - Use profile guided optimization (PGO) when building - bison 3.1: * Compiling Bison now requires a C99 compiler * Typed midrule actions * Reports include the type of symbols * Diagnostics about useless rules now implemented * C++: Generated parsers can be compiled with -fno-exceptions (lairi.cc) * GLR: Predicates support broken by #line directives * Printer and destructor with broken #line directives * Portability on ICC ==== claws-mail ==== Subpackages: claws-mail-lang - Update bug3889-fix_rev0.patch to new upstream fix (claws#3889). Fix-bug-3889-Address-and-quoted-message-inconsistent.patch ==== cracklib-dict-full ==== - Added additional dictionary libraries * http://downloads.skullsecurity.org/passwords/john.txt.bz2 * http://downloads.skullsecurity.org/passwords/cain.txt.bz2 * http://downloads.skullsecurity.org/passwords/500-worst-passwords.txt.bz2 * http://downloads.skullsecurity.org/passwords/twitter-banned.txt.bz2 ==== discover ==== Subpackages: discover-lang - Split available backends into subpackages - Improve description by using the one from Debian and rewording it slightly. ==== dolphin ==== Subpackages: dolphin-part dolphin-part-lang libdolphinvcs5 - Add Fix-that-dragging-a-file-can-trigger-inline-rename.patch to prevent accidentally triggering inline rename by just dragging a file (boo#1108797, kde#398375) ==== fipscheck ==== Version update (1.4.1 -> 1.5.0) Subpackages: libfipscheck1 - Changed source back to http now that current release folder has current tarball. - Updated fipscheck to 1.5.0 * Changed source to local file since latest official release is not in the official releases directory. * Downgraded libopenssl-devel to libopenssl-1_0_0-devel because 1.0.2 supports FIPS. ==== git ==== Version update (2.19.0 -> 2.19.1) Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - git 2.19.1: * CVE-2018-17456: Specially crafted .gitmodules files may have allowed arbitrary code execution when the repository is cloned with --recurse-submodules (bsc#1110949) ==== gnome-characters ==== Version update (3.29.91 -> 3.30.0) Subpackages: gnome-characters-lang gnome-shell-search-provider-gnome-characters - Update to version 3.30.0: + Re-enable GNOME Shell search provider by default. ==== gpg2 ==== Subpackages: gpg2-lang - Make package build reproducible (boo#1047218) ==== gpgme ==== Version update (1.11.1 -> 1.12.0) Subpackages: libgpgme11 libgpgmepp6 libqgpgme7 - Fix the build on ix86 as we disable one test there that should not work, sadly just sed is employed as the infrastructure for testing is not smart enough for comfy test filtering - Update to 1.12.0: * Enhanced the JSON based interface tool gpgme-json to support Native Messaging as well as new Javascript code to support the browser site. See lang/js/README for details. * Major overhaul of the Python language bindings documentation * Even for old versions of gpg a missing MDC will now lead to a decryption failure * Added context flag "auto-key-locate" to control the behavior of GPGME_KEYLIST_MODE_LOCATE * New data function to create a data object from an estream * Add more interfaces to the C++ binding * Improved error codes on decryption failure * Lots of minor fixes * Interface changes ==== gstreamer ==== Version update (1.14.3 -> 1.14.4) Subpackages: gstreamer-lang gstreamer-utils libgstreamer-1_0-0 typelib-1_0-Gst-1_0 - Update to version 1.14.4: + glviewconvert: wait and set the gl sync meta on buffers. + glviewconvert: copy composition meta from the primary buffer to both outputs. + glcolorconvert: don't copy overlay composition meta over to NULL outbufs. + matroskademux: add functionality needed for MSE use case fixing youtube playback in epiphany/webkit-gtk. + tagdemux: Use upstream GST_EVENT_STREAM_START (and stream-id) if present. + vorbisdec: fix header handling regression: init decoder immediately once we have headers. + wasapisink: recover from low buffer levels in shared mode. + fix GstSegment unit test which would fail on some 32-bit x86 CPUs. ==== gstreamer-editing-services ==== Version update (1.14.2 -> 1.14.4) Subpackages: libges-1_0-0 typelib-1_0-GES-1_0 - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. - Update to version 1.14.3: + Bugfix release, please see .changes in gstreamer main package. ==== gstreamer-plugins-bad ==== Version update (1.14.3 -> 1.14.4) Subpackages: gstreamer-plugins-bad-lang libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstisoff-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgsturidownloader-1_0-0 libgstwayland-1_0-0 libgstwebrtc-1_0-0 - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. ==== gstreamer-plugins-base ==== Version update (1.14.3 -> 1.14.4) Subpackages: gstreamer-plugins-base-lang libgstallocators-1_0-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstfft-1_0-0 libgstgl-1_0-0 libgstpbutils-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgstvideo-1_0-0 typelib-1_0-GstAudio-1_0 typelib-1_0-GstPbutils-1_0 typelib-1_0-GstTag-1_0 typelib-1_0-GstVideo-1_0 - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. ==== gstreamer-plugins-good ==== Version update (1.14.3 -> 1.14.4) Subpackages: gstreamer-plugins-good-extra gstreamer-plugins-good-gtk gstreamer-plugins-good-jack gstreamer-plugins-good-lang gstreamer-plugins-good-qtqml - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. - Update Source url to new home. ==== gstreamer-plugins-libav ==== Version update (1.14.2 -> 1.14.4) - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. - Update to version 1.14.3: + Bugfix release, please see .changes in gstreamer main package. ==== gstreamer-plugins-ugly ==== Version update (1.14.3 -> 1.14.4) Subpackages: gstreamer-plugins-ugly-lang - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. ==== gstreamer-rtsp-server ==== Version update (1.14.2 -> 1.14.4) - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. - Update to version 1.14.3: + Bugfix release, please see .changes in gstreamer main package. ==== gstreamer-validate ==== Version update (1.14.2 -> 1.14.4) Subpackages: libgstvalidate-1_0-0 typelib-1_0-GstValidate-1_0 - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. - Update to version 1.14.3: + Bugfix release, please see .changes in gstreamer main package. ==== gthumb ==== Version update (3.6.1 -> 3.6.2) Subpackages: gthumb-lang - Update to version 3.6.2: + Updated links to wiki page. + Desktop background: fixed the way to obtain the monitor geometry. + Recognize the asf mime type as a video format. + Image loader: fixed memory leak when the operation was cancelled. + Avoid flickering when scaling the image takes some time. + Image navigator: fixed popup positioning. + Do not crash when loading broken jpeg images. + Preferences: fixed crash when setting the current location as default. + Updated translations. ==== hyper-v ==== - fcopy: set 'error' in case an unknown operation was requested (c2d68afb) - Update lsvmbus interpreter from python3(1) to python(1) because SLE12 lacks python3 support (bsc#1093910) - vss: fix loop device detection (07136793) - Fix IP reporting by KVP daemon with SRIOV (4ba63412) - Fix a bug in the key delete code (86503bd3) - fix compiler warnings about major/target_fname (1330fc35) - PRIVATE hyper-v.compare-with-upstream.sh ==== irqbalance ==== Version update (1.2.0 -> 1.4.0) - Allow compilation with SLE-12 and before by: * removing -std=C99 Latest compiler version does not complain anymore, SLE12 SPx and before did. * Fix a possible buffer overflow compiler warning A fix_buffer_overflow_compiler.patch - Removed aarch64-compile-fixes.patch because it is mainline now. - Update to version 1.4.0: * Fixed an erroneous calculation of min_load that restricted candidates to a subset of objects * Fixed powerpc hotplug detection * Cleaned up syslog target dependency * Added some self test infrastructure (via make check) - Update to version 1.3.0 * New features in this release: optimization of platform device irq detection Added sample udev rules to trigger irq rescans on device add/remove Made irqbalance ui an optional compile component Added support for Intel CoD Add -v | --version option to command line * Bug fixes in this release: Misc compiler warning fixes and spelling errors Compilation error fix on aarch64 Compilation error fix when using clang in c99 mode Unused variable cleanup Lots of memory leak cleanup in irqbalance-ui Prevent irqbalance from running in a container Fix irq affinity assignment in some cases to wrong numa node Fix oneshot mode exclude legacy irq 255 * Deprecations: without-glib2 is removed, we just need it enough that we can't dummy it up anymore ==== java-11-openjdk ==== Subpackages: java-11-openjdk-headless - Add patches to workaround aarch64 critical bugs: * RHBZ-1628612-JDK-8210461-workaround-disable-aarch64-intrinsic.patch * RHBZ-1630996-JDK-8210858-workaround-disable-aarch64-intrinsic-log.patch ==== kernel-firmware ==== Version update (20180913 -> 20181001) Subpackages: ucode-amd - Update to version 20181001: * ti-connectivity: add firmware for CC2560(A) Bluetooth * linux-firmware: mediatek: add firmware for mt7668u Bluetooth * nvidia: add GV100 signed firmware * firmware/icl/dmc: Add v1.07 of DMC for Icelake * linux-firmware: add Marvell SD8997 firmware image * qca: update BT firmware files for QCA ROME chip. ==== lcms2 ==== Subpackages: liblcms2-2 liblcms2-2-32bit - Add check on CGATS memory allocation (bsc1108813, CVE-2018-16435, lcms2-cgats-memory-allocation.patch). - Update to 2.9 - Drop 0001-Added-an-extra-check-to-MLU-bounds.patch, it is now in the upstream code * Bugfix release + Several fixes related with security, and therefore not detailed here. + C++ compiles now without warnings + Added OSX and clang in travis + Added a travis-ci test matrix for many compilers and OS. Thanks to Thomas Weber (debian) for this great improvement. + testbed can now work with dynamic versions of library + Fixed wrong planar formatters regarding linestride interpretation - Added 0001-Added-an-extra-check-to-MLU-bounds.patch * fixes https://bugzilla.suse.com/show_bug.cgi?id=1021364 - Update to 2.8 * Fixed many typos in comments, thanks to Stefan Weil for doing that. * Fixed localization bug, added a new test case crayons.icc thnaks to Richard Hughes for providing the profile. * Fixed a bug in optimizer that made some formats (i.e, bits planar) unavailable * Fixed misalignment problems on Alpha. The compiler does not align strings, and accessing begin of string as a uint16 makes code to fail. * Added some extra checks to the tools and examples. * Fix a bug that prevented to read luminance tag * BIG amount of functionality contributed/Sponsored by Alien Skin Software: TransformStride, copyAlpha, performance plug-ins. Fixes some warnings as well. * added an extra _ to _stdcall to make it more portable * Fixed a bug in transicc for named color profiles * Fixed several compiler warnings * Added support for Visual Studio 2015 * Fixed for XCODE project - Update to GNOME 3.20 Fate#318572 - Update to version 2.7 * improved multi-threading * added contexts and a new locking plug-in type * bugfixes and other minor features - Dropped lcms-endian.patch that was fixed upstream. - Fixed missing dependency pthread - update to version 2.6 * Fixed a double free in recovering from a previous error in default intent handler. * Fixed some indexing out of bounds in floating point interpolation * Fixed a bug in PCS/Colorspace order when reading V2 Lab devicelinks * Added a way to retrieve matrix shaper always, no matter LUT is present * Changed endianess detection for PowerPC * Fixed memory leaks on error handling * Big revamp on Contexts, from Artifex * New locking plug-in, from Artifex * Added directories for tiff, jpeg in configure script * Fix for delete tag memory corruption * Added pthread dependency. From now lcms supports multithreading - Correct lcms-endian.patch to rely on autoconf only, no extra arch specific preprocessor hackery. - Update to version 2.5 * Maintenance update + Focused on incorrect path and error handling. It also updates the black point compensation algorithm to match the ICC including the new black point compensation algorithm actually being standarized by TC130, ICC and ISO. - Update to version 2.4 * Featured release + Performance and stability fixes + Black point detection from the algorithm disclosed by Adobe + Added support for transforms on planar data with different stride + Added a new plug-in type for optimizing full transforms + Linear (gamma 1.0) profiles can now operate in unbounded mode + Added "half" float support + Please see the ChangeLog file for more details. - update to version 2.3 * Full support for ICC 4.3 - Open all fds with O_CLOEXEC - Use gcc visibility, symbol table shrinks around 50% ... -update to 2.2 * maintenance update +Version 2.2 adds stability. - fixes all known bugs - adds support for dictionary metatag. Pascal unit now compiles under FPK Pascal as well as Delphi. - fix devel package name in baselibs.conf - update to version 2.1 * maintenance release (no further details in changelog) - remove obsolete patches - build documentation noarch and recompress tar -more spec file cleanups and prepare for factory submit -test building against it in my home repo - initial lcms2 package, based on package from version 1 - use OBS source services to download tar ball ==== libgit2 ==== Version update (0.27.4 -> 0.27.5) - libgit2 0.27.5: * CVE-2018-17456: Submodule URLs and paths with a leading "-" are now ignored to avoid injecting options into library consumers that perform recursive clones (bsc#1110949) * Avoid a buffer overflow when running repack * Avoid stack overflow from unbounded recursion in configuration file parser * Avoid heap-buffer overflow when parsing "ok" packets * Fix heap-buffer overflows in smart protocol parsing code * Fix potential integer overflows on platforms with 16 bit ints * Fix potential NULL pointer dereference when parsing configuration files ==== libkgapi ==== Subpackages: libKPimGAPICalendar5 libKPimGAPIContacts5 libKPimGAPICore5 libKPimGAPITasks5 libkgapi-lang sasl2-kdexoauth2 - We actually need <= as the version did not get bumped ==== libpinyin ==== Version update (2.2.0 -> 2.2.1) Subpackages: libpinyin-data libpinyin13 libzhuyin13 - Update version to 2.2.1 * Fix predicted candidates ==== libvirt ==== Version update (4.7.0 -> 4.8.0) Subpackages: libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-gluster libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - Update to libvirt 4.8.0 - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Dropped patches: 60b4fd90-libxl-rm-vm-finish-phase.patch, e39c66d3-libxl-fix-p2p-migration.patch, 47da84e0-libxl-fix-job-handling-migsrc.patch, 0149464a-libxl-fix-job-handling-migdst.patch, 5ea2abb3-libxl-join-mig-rcv-thread.patch ==== libzypp ==== Version update (17.7.0 -> 17.7.2) - Fix blocking wait for finished child process (bsc#1109877) - version 17.7.2 (2) - Fix conversion of string and glob to regex when compiling queries (bsc#1099982, bsc#939392, bsc#556664) - version 17.7.1 (2) ==== lmdb ==== - Fix occasional crash when freed pages landed on the dirty list twice * Add 0001-ITS-8756-remove-loose-pg-from-dirty-list-in-freelist.patch ==== lynx ==== Version update (2.8.9~dev.16 -> 2.8.9rel.1) - update to 2.8.9rel1.1: * documentation/metrics updates * fix an inconsistency in message for -listonly option * update test-packages to use current ncurses test-packages * improve portability for sockaddr structures used in HTTP and FTP, for IPv6 and SOCKS configurations * fix several minor warnings reported by Coverity * build-fix overlooked in 2.8.9dev.3 when INACTIVE_INPUT_STYLE_VH is defined, for problem introduced by 2.8.8dev.17 code-cleanup * trim unnecessary intllib symbols from src/chrtrans/makefile.in * when cross-compiling, trim LDFLAGS from makefile rule linking makeuctb - dropped patches: lynx-helpfile.patch: latest documentation available online ==== neon ==== - replaced libopenssl-devel with libopenssl-1_1-devel ==== net-snmp ==== Subpackages: libsnmp30 perl-SNMP snmp-mibs - Fix remote DoS in agent/helpers/table.c (bsc#1111122, CVE-2018-18065) Add net-snmp-5.7.3-helpers-table-skip-if-next-handler-called.patch ==== nghttp2 ==== Version update (1.33.0 -> 1.34.0) - Update to version 1.34.0: * lib: Implement RFC 8441 :protocol support * nghttpx: Add read/write-timeout parameters to backend option * nghttpx: Fix mruby parameter validation in backend option * nghttpx: Implement RFC 8441 Bootstrapping WebSocket with HTTP/2 * nghttpx: Update neverbleed to fix OpenSSL 1.1.1 issues * nghttpx: Update mruby 1.4.1 * nghttpx: Add mruby env.tls_handshake_finished * nghttpx: Add --tls13-ciphers and --tls-client-ciphers options * nghttpx: Add RFC 8470 Early-Data header field support * nghttpx: Add RFC 8446 TLSv1.3 0-RTT early data support ==== obs-service-tar_scm ==== Version update (0.9.1.1534504824.0732756 -> 0.9.4.1537959361.56833cb) Subpackages: obs-service-obs_scm obs-service-obs_scm-common - Update to version 0.9.4.1537959361.56833cb: * enable flake8 in hound * cleanup for pylint and flake8 * split pylint2 in GNUmakefile * fix check for "--reproducible" * create reproducible obscpio archives * fix flake warning - Update to version 0.9.3.1537869751.51a17c5: * fix regression from 44b3bee * Support also SSH urls for Git - Update to version 0.9.2.1537788075.fefaa74: * fix CVE-2018-12474 * check name/version option in obsinfo for slashes * check url for remote url * check symlinks in subdir parameter * check filename for slashes * disable follow_symlinks in extract feature - switch to obs_scm for this package - Update to version 0.9.1.1537341862.5348694: * run download_files in appimage and snapcraft case * check --extract file path for parent dir * Fix parameter descriptions ==== paprefs ==== Version update (0.9.10+20180501.534d20a -> 1.0) Subpackages: paprefs-lang - Update to version 1.0: + Port to meson. - Stop using source service, new stable release out. - Add meson BuildRequires and corresponding macros following upstreams port to meson. - Drop intltool, libtool and lynx BuildRequires, no longer needed. - Rebase paprefs-module-combine-sink.patch to upstream committed. ==== perl-Glib ==== Version update (1.327 -> 1.328) - Fix autogenerated changes - updated to 1.328 see /usr/share/doc/packages/perl-Glib/ChangeLog.pre-git ==== postfix ==== Subpackages: postfix-doc - bsc#1092939 - Postfixes postconf gives a lot of LDAP related warnings o add m4 as buildrequires, as proposed. ==== ppp ==== - ppp-2.4.7-DES-openssl.patch: Use openssl instead of libcrypt for DES ==== protobuf-c ==== Version update (1.3.0 -> 1.3.1) - Update to new upstream release 1.3.1 * Restore protobuf-2.x compatibility * Convert uses of protobuf's scoped_ptr.h to C++11 std::unique_ptr, needed to compile against protobuf 3.6.1. - Rename %soname to %sover to better reflect its use. ==== python-Pillow ==== Version update (5.2.0 -> 5.3.0) - update to version 5.3.0: * Changed Image size property to be read-only by default #3203 [radarhere] * Add warnings if image file identification fails due to lack of WebP support #3169 [radarhere, hugovk] * Hide the Ghostscript progress dialog popup on Windows #3378 [hugovk] * Adding support to reading tiled and YcbCr jpeg tiffs through libtiff #3227 [kkopachev] * Fixed None as TIFF compression argument #3310 [radarhere] * Changed GIF seek to remove previous info items #3324 [radarhere] * Improved PDF document info #3274 [radarhere] * Add line width parameter to rectangle and ellipse-based shapes [#3094] [hugovk, radarhere] * Fixed decompression bomb check in _crop #3313 [dinkolubina, hugovk] * Added support to ImageDraw.floodfill for non-RGB colors #3377 [radarhere] * Tests: Avoid catching unexpected exceptions in tests #2203 [jdufresne] * Use TextIOWrapper.detach() instead of NoCloseStream #2214 [jdufresne] * Added transparency to matrix conversion #3205 [radarhere] * Added ImageOps pad method #3364 [radarhere] * Give correct extrema for I;16 format images #3359 [bz2] * Added PySide2 #3279 [radarhere] * Corrected TIFF tags #3369 [radarhere] * CI: Install CFFI and pycparser without any PYTHONOPTIMIZE #3374 [hugovk] * Read/Save RGB webp as RGB (instead of RGBX) #3298 [kkopachev] * ImageDraw: Add line joints #3250 [radarhere] * Improved performance of ImageDraw floodfill method #3294 [yo1995] * Fix builds with --parallel #3272 [hsoft] * Add more raw Tiff modes (RGBaX, RGBaXX, RGBAX, RGBAXX) #3335 [homm] * Close existing WebP fp before setting new fp #3341 [radarhere] * Add orientation, compression and id_section as TGA save keyword arguments #3327 [radarhere] * Convert int values of RATIONAL TIFF tags to floats #3338 [radarhere, wiredfool] * Fix code for PYTHONOPTIMIZE #3233 [hugovk] * Changed ImageFilter.Kernel to subclass ImageFilter.BuiltinFilter, instead of the other way around #3273 [radarhere] * Remove unused draw.draw_line, draw.draw_point and font.getabc methods #3232 [hugovk] * Tests: Added ImageFilter tests #3295 [radarhere] * Tests: Added ImageChops tests #3230 [hugovk, radarhere] * AppVeyor: Download lib if not present in pillow-depends #3316 [radarhere] * Travis CI: Add Python 3.7 and Xenial #3234 [hugovk] * Docs: Added documentation for NumPy conversion #3301 [radarhere] * Depends: Update libimagequant to 2.12.1 #3281 [radarhere] * Add three-color support to ImageOps.colorize #3242 [tsennott] * Tests: Add LA to TGA test modes #3222 [danpla] * Skip outline if the draw operation fills with the same colour [#2922] [radarhere] * Flake8 fixes #3173, #3380 [radarhere] * Avoid deprecated 'U' mode when opening files #2187 [jdufresne] ==== python-dbus-python ==== Subpackages: python2-dbus-python python3-dbus-python - Add missing dependency for pkg-config files ==== python-gst ==== Version update (1.14.2 -> 1.14.4) - Update to version 1.14.4: + Bugfix release, please see .changes in gstreamer main package. - Update to version 1.14.3: + Bugfix release, please see .changes in gstreamer main package. ==== python-libvirt-python ==== Version update (4.7.0 -> 4.8.0) - Update to 4.8.0 - Add all new APIs and constants in libvirt 4.8.0 ==== readline ==== Subpackages: libreadline7 readline-devel readline-doc - Rework patch readline-7.0-screen.patch ==== rpm ==== Subpackages: rpm-build rpm-devel - Update dwz-compression.patch to latest git trunk (62d901a22b7eb6c86c15290032a41e11427ddf87). ==== rsibreak ==== Version update (0.12.8 -> 0.12.9) Subpackages: rsibreak-lang - Update to 0.12.9: * Fixed some notifications not triggering (kde#396270) * Translation improvements * Minor internal refactoring - Mark license files with %license instead of %doc - Run spec-cleaner ==== rubygem-mocha ==== Version update (1.5.0 -> 1.7.0) - updated to version 1.7.0 no changelog found ==== smartmontools ==== - Fix smartd.service EnvironmentFile (boo#1095662). ==== snapper ==== Version update (0.5.6 -> 0.6.1) Subpackages: libsnapper4 snapper-zypp-plugin - right align used space in table output - version 0.6.1 - show used space (exclusive space of btrfs qgroup) for each snapshot (fate#323843) - version 0.6.0 ==== sqlite3 ==== Version update (3.25.0 -> 3.25.2) Subpackages: libsqlite3-0 libsqlite3-0-32bit - SQLite 3.25.2: * Add the PRAGMA legacy_alter_table=ON command that causes the "ALTER TABLE RENAME" command to behave as in 3.24.0 and earlier * Fix issue with some expressions with windows functions in views - includes changes from SQLite 3.25.1: * Avoid false-positive error checks on ALTER TABLE * Further ORDER BY LIMIT optimization fixes for window functions ==== tomcat ==== Version update (9.0.5 -> 9.0.10) Subpackages: tomcat-admin-webapps tomcat-el-3_0-api tomcat-jsp-2_3-api tomcat-lib tomcat-servlet-4_0-api tomcat-webapps - Declare following files to config(noreplace) to prevent override access rights: - host-manager/META-INF/context.xml - manager/META-INF/context.xml - Empty tomcat-9.0.sysconfig to avoid overwriting of customer's configuration during update (bsc#1067720) - Update to Tomcat 9.0.10. See changelog at http://tomcat.apache.org/tomcat-9.0-doc/changelog.html#Tomcat_9.0.10_(markt) - Fixed CVEs: - CVE-2018-1336 (bsc#1102400) - CVE-2018-8014 (bsc#1093697) - CVE-2018-8034 (bsc#1102379) - CVE-2018-8037 (bsc#1102410) - Rebased patch tomcat-9.0-JDTCompiler-java.patch - Added patch tomcat-9.0-disable-osgi-build.patch to disable adding OSGi metadata to JAR files ==== unbound ==== Version update (1.8.0 -> 1.8.1) Subpackages: libunbound2 unbound-anchor - update to 1.8.1: Number of bug fixes, a list of features added and some defaults changed. Features: - Perform TLS SNI indication of the host that is being contacted for DNS over TLS service. It sets the configured tls auth name. This is useful for hosts that apart from the DNS over TLS services also provide other (web) services. Bug Fixes: - More explicitly mention the type of ratelimit when applying ip-ratelimit. - Fix spelling error in header, from getdns commit by Andreas Gelmini. - iana port update. - Fixed unused return value warnings in contrib/fastrpz.patch for asprintf. - Fix to squelch respip warning in unit test, it is printed at higher verbosity settings. - Fix spelling errors. - Fix initialisation in remote.c - Fix seed for random backup code to use explicit zero when wiped. - exit log routine is annotated as noreturn function. - free memory leaks in config strlist and str2list insert functions. - do not move unused argv variable after getopt. - Remove unused if clause in testcode. - in testcode, free async ids, initialise array, and check for null pointer during test of the test. And use exit for return to note irregular program stop. - Free memory leak in config strlist append. - make sure nsec3 comparison salt is initialized. - unit test has clang analysis. - remove unused variable assignment from iterator scrub routine. - check for null in delegation point during iterator refetch in forward zone. - neater pointer cast in libunbound context quit routine. - initialize statistics totals for printout. - in authzone check that node exists before adding rrset. - in unbound-anchor, use readwrite memory BIO. - assertion in autotrust that packed rrset is formed correctly. - Fix memory leak when message parse fails partway through copy. - remove unused udpsize assignment in message encode. - nicer bio free code in unbound-anchor. - annotate exit functions with noreturn in unbound-control. - Fix compile on Mac for unbound, provide explicit_bzero when libc does not have it. - Fix unbound for openssl in FIPS mode, it uses the digests with the EVP call contexts. - Fix that with harden-below-nxdomain and qname minisation enabled some iterator states for nonresponsive domains can get into a state where they waited for an empty list. - Stop UDP to TCP failover after timeouts that causes the ping count to be reset by the TCP time measurement (that exists for TLS), because that causes the UDP part to not be measured as timeout. - Fix #4156: Fix systemd service manager state change notification. - Fix #4149: Add SSL cleanup for tcp timeout. - Fix #4188: IPv6 forwarders without ipv6 result in SERVFAIL, fixes qname minimisation with a forwarder when connectivity has issues from rejecting responses. - fastrpz.patch fixed. ==== vim ==== Version update (8.1.0436 -> 8.1.0451) Subpackages: gvim vim-data vim-data-common - Updated to revision 451, fixes the following problems * Can get the text of inputsecret() with getcmdline(). * May access freed memory when syntax HL times out. * The ex_make() function is too long. * Recursive use of getcmdline() still not protected. * remove() with a range not sufficiently tested. * Build failure without command line history. * GUI: Cursor not drawn after ":redraw | sleep". * Unnecessary static function prototypes. * Unnecessary check for NULL pointer. * Setting 'term' does not store location for termcap options. * Options test fails in the GUI. * GUI scrollbar test fails with Athena and Motif. * Cursorline not removed when using 'cursorbind'. * When 'rnu' is set folded lines are not displayed correctly. * Build failure without the +fold feature. ==== wicked ==== Version update (0.6.49 -> 0.6.50) Subpackages: libwicked-0-6 wicked-service - version 0.6.50 - firewall: do not assign default zone, but pass as is (bsc#1109147) - nanny: fix memory leaks on fast create-delete calls (bsc#1095818) + fsm: cleanup worker reset (reinit) vs. free + fsm: do not process or pass pending workers to nanny + nanny: catch init failures in device registration + netdev: allow NULL in get and put functions + model: fix to call (netif) dbus object destructors + model: removed server specific call in netif destroy + fsm: handle NULL in worker get and release calls + fsm: process device delete event separately + calls: split get netif service and netif list utils + xml-schema: fix range constraint values parsing + xml-schema: remove underscores from ni_xs_type_new + xml-schema: fix type leak around ni_xs_build_one_type + fsm: free worker control mode on worker free + xpath: trace and free complete xpath expression tree + nanny: fix config leak in ni_nanny_recheck_policy + dbus: free pending call in ni_dbus_connection_call + dbus: free dbus_message_iter_get_signature result ==== xterm ==== Version update (335 -> 337) - Patch #337 * regenerated configure script * revise/improve fix for scrolling in margins * amend change to default-translations "select" to ensure that specific key-press actions are listed first ==== yast2-instserver ==== Version update (4.1.0 -> 4.1.1) - Create the mount point directory if it does not exist yet (bsc#1110037) - 4.1.1 ==== zypper ==== Version update (1.14.11 -> 1.14.12) Subpackages: zypper-aptitude zypper-log - Always warn if no repos are defined, but don't return ZYPPER_EXIT_NO_REPOS(6) in install commands (bsc#1109893) - Switch global help format and fix bash-completion - version 1.14.12 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] A look on RPM compression in openSUSE
by Jan Engelhardt 14 Oct '18

14 Oct '18

Compression performance plots are often done with something like the Silesia corpus. Linux distributions have rather different proportions of file types, I think. They have a lot of machine code, and even more data files, and probably not so much text and images. Since our data set is also 2.8 orders of magnitude bigger, rerunning a compression shootout will give more detail. So I did just that. http://paste.opensuse.org/15790105 http://inai.de/files/openSUSE-compression.ods (My measurements included just *.x86_64.rpm + *.noarch.rpm.) The takeaway from that is: * xz outperforms zstd in the regions that xz caters to. But overall, xz forms the far end of the "law of diminishing returns". * Moving openSUSE from xz-5 to xz-2 saves 50% of time for an investment of just 3.2 GB of space. Or, moving to zstd-7, saving 85% for ~6.1 GB. Other observations: * There are steps in compressor behavior, and that penalizes a lot of levels, leaving only a few sensible ones: zstd-2-3-7-12, xz-1-2-3-4-5-9 (disregarding memory use, which is another factor). * Some of our packages are too fat. kicad-packages takes longer to compress than the entire remaining distro at zstd-19 with 16x-parallelism. In other words, a sufficiently parallelized system may have to wait just for that one to complete. (* "Trend lines" in LibreOffice Calc are quite useless sometimes, as it does not appear to calculate a constant offset portion for exp/pow fittings.) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 12

[opensuse-factory] package x86info should be removed from current releases: outdated/unmaintained
by L A Walsh 12 Oct '18

12 Oct '18

Looks unmaintained. Not sure, as current release seems undated on website, but prev release (29) was from 2011. Main detail: shows my 7 yr old server cpu as: > x86info x86info vVERSION Found 12 identical CPUs Extended Family: 0 Extended Model: 2 Family: 6 Model: 44 Stepping: 2 Type: 0 (Original OEM) CPU Model (x86info's best guess): Unknown model. Processor name string (BIOS programmed): Intel(R) Xeon(R) CPU X5660 @ 2.80GHz Total processor threads: 12 This system has 2 tri-core processors with hyper-threading (2 threads per core) running at an estimated 2.80GHz 2.8 is the max MHz, (1.6 is low), but..a "tri-core processor"...really? did they make such things? Anyway, I think lscpu more than replaces the above info: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 6 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 44 Model name: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz Stepping: 2 CPU MHz: 1597.075 CPU max MHz: 2794.0000 CPU min MHz: 1596.0000 BogoMIPS: 5586.28 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 12288K NUMA node0 CPU(s): 0,2,4,6,8,10 NUMA node1 CPU(s): 1,3,5,7,9,11 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 10

[opensuse-factory] Tumbleweed - Review of the week 2018/41
by Dominique Leuenberger / DimStar 12 Oct '18

12 Oct '18

Dear Tumbleweed users and hackers, This week, only two snapshots have been published (1004 and 1009); 1008 would have been good too, but it stayed too long in testing and was overtaken by OBS building 1009 a bit faster than openQA could test it. Well, more updates in one snapshot, but nothing lost. The snapshots contained updates like * Linux kernel 4.18.11 & 4.18.12 (two snapshots, two kernels? oh yeah!) * Samba 4.9.1 * Squid 4.3 * KDE Plasma 5.14.0 And these things are being worked on: * GNOME 3.30 (likely to ship next week, but with GDM 3.28.x as we faced issues with autologin with the 3.30 branch) * glibc 2.28, Python 3.7, openssl 1.1.1: the three all interdepend on each other and cause a bunch of new failures – See Staging:C * go 1.11 * ncurses 6.1-20180707: breaks Xen (deprecations added, Xen builds with -Werror) * LLVM 7 * Even more recent Linux kernels * Mesa 18.2.x (VLC crashes need to be investigated) * KDE Applications 18.08.2 Cheers, Dominique

1 0