March 2017 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] TW 20170324 snapshot generates systemd error message
by Karl Cheng 29 Mar '17

29 Mar '17

For some reason, after the 20170324 update, I'm seeing the following error message in the journal: ``` Mar 28 17:32:09 linux-xxxx systemd-modules-load[399]: Failed to find module 'description "thermal daemon"' Mar 28 17:32:09 linux-xxxx systemd-modules-load[399]: Failed to find module 'start on runlevel [2345] and started dbus' Mar 28 17:32:09 linux-xxxx systemd-modules-load[399]: Failed to find module 'stop on stopping dbus' Mar 28 17:32:09 linux-xxxx systemd-modules-load[399]: Failed to find module 'normal exit 1' Mar 28 17:32:09 linux-xxxx systemd-modules-load[399]: Failed to find module 'respawn' Mar 28 17:32:09 linux-xxxx systemd-modules-load[399]: Failed to find module 'respawn limit 10 60' Mar 28 17:32:09 linux-xxxx systemd-modules-load[399]: Failed to find module 'exec thermald --no-daemon --dbus-enable' Mar 28 17:32:09 linux-xxxx systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE Mar 28 17:32:09 linux-xxxx systemd[1]: Failed to start Load Kernel Modules. Mar 28 17:32:09 linux-xxxx systemd[1]: systemd-modules-load.service: Unit entered failed state. Mar 28 17:32:09 linux-xxxx systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. ``` Is this meant to occur? I've updated the system with zypper dup and only include official repos and Packman. -- - Karl Cheng (Qantas94Heavy) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] BIND tools (dig, host etc) IDN support
by Andrei Borzenkov 29 Mar '17

29 Mar '17

Inspired by recent discussion on users list. BIND can be built with idnkit to support non-ASCII domain names. As far as I can tell, bind comes with copy of idnkit in contrib and our package even builds and installs it, but as packaged bind itself does *not* use this library during build. Is it intentional? Today non-ASCII domains are increasingly more common. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 8

[opensuse-factory] Proposal: removal of /dev/root symlink
by Franck Bui 29 Mar '17

29 Mar '17

Hi all, I'd like to know if there would be strong objections to this proposal. The main reason is that this symlink is not be reliable in all cases since direct relation between the rootfs and the backing block device is not always possible (think BTRFS). It's been removed since a while now in the other distros and I don't think any tool relies on it these days. For the few users who would want to continue using the symlink the relevant udev rule could still be copied in /etc/udev/rules.d The removal would take effect during the upgrade to v233, which should happen in a couple of weeks if nothing goes wrong. Thanks. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 16

Re: [opensuse-factory] libglvnd/Mesa just submitted to factory/TW
by Stefan Dirsch 28 Mar '17

28 Mar '17

On Tue, Mar 28, 2017 at 04:21:56PM +0200, Tobias Klausmann wrote: > Hi, > > finally we see libglvnd in use, should make Life of Nvidia users easier on > the long run! Yeah! > I haven't payed too much attention of the general state. Is there plans to > upstream this to Mesa? Otherwise it is likely to generate problems on every > new Mesa release (the patches are already not applicable for mesa master). > It'd be nice to get this into master! Definitely. Most patches - if not all - will land in upstream soon. Upstream is very interested in downstream applying as less patches as possible. Thanks, stefan Public Key available ------------------------------------------------------ Stefan Dirsch (Res. & Dev.) SUSE LINUX GmbH Tel: 0911-740 53 0 Maxfeldstraße 5 FAX: 0911-740 53 479 D-90409 Nürnberg http://www.suse.de Germany --------------------------------------------------------------- SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) --------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumblweed Expert Partitioner does not show actual Partiton setup...
by Axel Braun 28 Mar '17

28 Mar '17

Hi, I was about to install TW on a 2-Disk system. Plan was to reduce size on the 2nd HD, which is currently a NTFS partition. When the installation comes around to partitioning, the proposal is made to use /dev/sdb completey, to set up a boot volume, swap, root and home partition. As this is not what I want, I select 'expert mode'. Here the tools does not show the actual partitioning, but the proposed values! This is a bug IMHO, as it does not give me the option to work on the currently existing partition. Anyone to confirm? Cheers Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Error message after updating grub in Tumbleweed
by ronisbr＠gmail.com 28 Mar '17

28 Mar '17

Hi guys! Every time grub package is updated on Tumbleweed, I see the following message: Output of grub2-i386-pc-2.02~rc2-1.1.x86_64.rpm %posttrans script: update-bootloader: 2017-03-24 11:24:01 <3> update-bootloader-4700 run_command.274: '/usr/lib/bootloader/grub2/install' failed with exit code 1, output: <<<<<<<<<<<<<<<< target = i386-pc + /usr/sbin/grub2-install --target=i386-pc --force --skip-fs-probe /dev/sdb Installing for i386-pc platform. /usr/sbin/grub2-install: aviso: this GPT partition label contains no BIOS Boot Partition; embedding won't be possible. /usr/sbin/grub2-install: erro: filesystem `btrfs' doesn't support blocklists. >>>>>>>>>>>>>>>> Here, root is btrfs (including /boot). This is the default in Tumbleweed installation I guess. Until today, I did not saw any problems, the system boots fine. Should I be worried about it? Best regards, Ronan Arraes -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] New Tumbleweed snapshot 20170324 released!
by Dominique Leuenberger 27 Mar '17

27 Mar '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: ImageMagick (6.9.7.7 -> 6.9.8.2) cpupower (4.6 -> 4.10) cups-filters ddd dpdk ibus-pinyin kiwi-config-openSUSE mailman mutter python-requests (2.12.4 -> 2.13.0) squid wireless-regdb (2016.06.10 -> 2017.03.07) xosview === Details === ==== ImageMagick ==== Version update (6.9.7.7 -> 6.9.8.2) Subpackages: ImageMagick-devel ImageMagick-extra libMagick++-6_Q16-7 libMagickCore-6_Q16-4 libMagickWand-6_Q16-4 perl-PerlMagick - updated to 6.8.8-2 * Support namespaces for the security policy. * Respect throttle policy. * Support the -authenticate option for PDF. * Fix Spurious memory allocation message. * Identical images should return inf for PSNR. * Fixed fd leak for webp coder. * Prevent random pixel data for corrupt JPEG image. * Support pixel-cache and shred security policies. * Fixed memory leak when creating nested exceptions in Magick++. * Eliminate bogus assertion. * Unbreak build without JPEG support. + ImageMagick-montage.t.patch ==== cpupower ==== Version update (4.6 -> 4.10) Subpackages: libcpupower0 - Update cpupower and turbostat to latest kernel v4.10 sources D library_cleanup.patch - Change .c file header file modification, modify in Makefile instead: D turbostat_set_asm_header_fixed.patch A turbostat_makefile_fix_asm_header.patch ==== cups-filters ==== Subpackages: cups-filters-cups-browsed cups-filters-foomatic-rip cups-filters-ghostscript - fallback_read_ppd_file_from_environment.patch lets foomatic-rip call read_ppd_file() with PPD filename from environment as fallback, see https://bugs.linuxfoundation.org/show_bug.cgi?id=1388 ==== ddd ==== - fix color names in xpm files + ddd-imagemagick-xpm-colors.patch ==== dpdk ==== - Disable dpdk-kmp package for ix86. ==== ibus-pinyin ==== - Remove redundant buildroot removal from %install. ==== kiwi-config-openSUSE ==== - Do not show the installer icon on the desktop of rescue CDs, as it not available in first place (boo#1025728). - Use localectl in langset to also change X11 keyboard layout - Import keys for installation to avoid trust prompt - Remove useless cp command from config.sh.in - Add BuildRequires: openSUSE-release to make YaST2 pick the correct keymaps ==== mailman ==== - Require system user wwwrun ==== mutter ==== Subpackages: libmutter-0-0 mutter-data - Add libmutter0 Obsoletes: Ease updates from older versions of openSUSE (boo#1030759). ==== python-requests ==== Version update (2.12.4 -> 2.13.0) - fixed dependencies in spec - update to version 2.13.0 * Only load the idna library when we?ve determined we need it. This will save some memory for users. * Updated bundled urllib3 to 1.20. * Updated bundled idna to 2.2. - update to version 2.12.5 * Fixed an issue with JSON encoding detection, specifically detecting big-endian UTF-32 with BOM. ==== squid ==== - initialize_cache_if_needed.sh, squid_dir.sed: Initialize cache directory on startup if it is missing. Move scripts out of systemd service file and into individual files. (bnc#1030421) ==== wireless-regdb ==== Version update (2016.06.10 -> 2017.03.07) - Update to 2017.03.07 (boo#1030085): * Update rules for Australia (AU) and add 60GHz rules * Update 5 GHz rules for Canada * Remove DFS requirement for India (IN) ==== xosview ==== - spec-cleaned, removed limitation to gcc5 - Diskmeter: allow removable devices (boo#1027532) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Corrupted 'Umlauts' when disk is mounted by root
by Axel Braun 27 Mar '17

27 Mar '17

Hi, I want to restore user settings from an old harddrive. I noticed that if root mounts the drive (via KDE desktop), all special characters (ä, ü, ß) are corrupted. If normal user mounts the drive, everything looks OK. settings in /etc/sysconfig/language are: RC_LANG = de_DE.UTF-8 RC_LC_CTYPE="de_DE.UTF-8" ROOT_USES_LANG="ctype" -> Value "ctype" means that root uses just LC_CTYPE. What parameter do I need to change to have external drives mounted with correct codepage? Cheers Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 20

[opensuse-factory] YaST Packager unaware of 1-click installs/prompts/other instances
by jan karibjanov 27 Mar '17

27 Mar '17

I would argue that once once you try and fire up YaST packager you could like check if it's running and tell that instance to do its thing. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Browsers can't center pop-ups when snapped
by jan karibjanov 27 Mar '17

27 Mar '17

https://www.hackerrank.com/challenges/service-lane?utm_campaign=challenge-r… On this link with chrome/...-ium/firefox a pop-up appears that will appear on the center of display rather than browser window that is snapped to the half of desktop. I suspect this occurrence is exclusive to Opensuse. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2