December 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] acpid requires systemd?
by Felix Miata 25 Apr '24

25 Apr '24

Can this be true? If so, why? Zypper won't let me upgrade acpid without breakage unless systemd is installed too. I have systemd locked out, as I'd rather test things I can understand in Factory, not major overhaul stuff. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

[opensuse-factory] receiving files via bluetooth fails
by Olaf Hering 24 Sep '17

24 Sep '17

Some months ago it was possible to receive files via bluetooth with TW. But since some weeks that fails for me. I waited for GNOME 3.20 and the new bluez in the hope it will fix itself, but the failure remains: Apr 05 18:01:28 probook obexd[3042]: CONNECT(0x0), (null)(0xffffffff) Apr 05 18:01:28 probook obexd[3042]: CONNECT(0x0), (null)(0x0) Apr 05 18:01:32 probook obexd[3042]: PUT(0x2), (null)(0xffffffff) Apr 05 18:01:32 probook obexd[3042]: open(/home/olaf/.cache/obexd/GSIBFY): No such file or directory (2) Apr 05 18:01:32 probook obexd[3042]: PUT(0x2), NOT_FOUND(0x44) Apr 05 18:01:32 probook obexd[3042]: DISCONNECT(0x1), (null)(0xffffffff) Apr 05 18:01:32 probook obexd[3042]: DISCONNECT(0x1), SUCCESS(0x20) Apr 05 18:01:32 probook bluetoothd[1520]: Unable to get io data for Object Push: getpeername: Transport endpoint is not connected (107) Apr 05 18:01:32 probook obexd[3042]: disconnected: Transport got disconnected Apr 05 18:02:42 probook obexd[3042]: CONNECT(0x0), (null)(0xffffffff) Apr 05 18:02:42 probook obexd[3042]: CONNECT(0x0), (null)(0x0) Apr 05 18:02:42 probook obexd[3042]: PUT(0x2), (null)(0xffffffff) Apr 05 18:02:42 probook obexd[3042]: open(/home/olaf/.cache/obexd/1OLQFY): Operation not permitted (1) Apr 05 18:02:42 probook obexd[3042]: PUT(0x2), FORBIDDEN(0x43) Apr 05 18:02:42 probook obexd[3042]: DISCONNECT(0x1), (null)(0xffffffff) Apr 05 18:02:42 probook obexd[3042]: DISCONNECT(0x1), SUCCESS(0x20) Apr 05 18:02:42 probook bluetoothd[1520]: Unable to get io data for Object Push: getpeername: Transport endpoint is not connected (107) Apr 05 18:02:42 probook obexd[3042]: disconnected: Transport got disconnected First I tried to remove /home/olaf/.cache/obexd, but nothing seems to feel responsible to create this dir as seen with the first error. Then I created it with mkdir -m07777, and that just gives the EPERM error as before. strace shows that it gets some "forbidden" from dbus. Is receiving files working for anyone else? Also the rfkill thing does not work reliable. NetworkManager finds the device according to syslog, but the GNOME bluetooth thing finds nothing. Something softblocks it: root@probook:~ # hciconfig -a hci0 reset Can't init device hci0: Operation not possible due to RF-kill (132) root@probook:~ # rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 4: hci0: Bluetooth Soft blocked: yes Hard blocked: no Need to run 'rfkill unblock 4' manually to get it going. Once that it done its appearently possible to use the UMTS, and sending a file works as well. Olaf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] new package: akonadi-ews
by Michal Hlavac 24 Apr '17

24 Apr '17

Hi, I've built new package for openSUSE Tumbleweed. Akonadi resource agent for Microsoft Exchange using Exchange Web Services (EWS) protocol. It's my first package so any test or help is appreciated. https://build.opensuse.org/package/show/home:hlavki/akonadi-ews thanks, m. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 12

[opensuse-factory] openSUSE:Leap:42.3 started
by Ludwig Nussel 05 Apr '17

05 Apr '17

Hi, 42.2 is out of the door, time to relax and wait for the Christmas holidays, right? Well, far from that. We have to prepare for the next release. So for the Leap 42 line that means 42.3 based on SLE12 SP3. In anticipation of that OBS already has openSUSE:Leap:42.3 set up as copy of 42.2. It already accepts submissions. Right now mostly to directly integrate 42.2 maintenance updates. With regard to the schedule SUSE plans to release SLE12 SP3 earlier than the usual November date. It's beneficial for Leap if we get the changes we need into SLE and therefore are able to share sources. So I think it makes sense to follow suit and have our development phase with SP3 too, ie move the release date earlier as well. Due to the shortened development time I don't expect big changes in the base system. 42.3 should keep the promise of continuing an LTS line and mostly collect all 42.2 maintenance updates until then plus even more packages and selected updates from Tumbleweed. I'll propose a more concrete schedule when I know more about SP3. cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.com/ SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 14

[opensuse-factory] Leap 42.2 in 32bit?
by Mathias Homann 02 Mar '17

02 Mar '17

Hi, on OBS a lot of projects are building for Leap 42.2 in both i586 and X86_64, does this mean Leap 42.2 will be available in 32bit? Cheers MH -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 5

[opensuse-factory] add pam_faillock for factory, 42.2, SLES 12 SP2
by Jason Newton 02 Feb '17

02 Feb '17

I'd consider adding it as an update, too, to 42.1 and SP1, at least in aux repositories - preferably to updates :-). I've spoken with the author of pam_faillock and I believe it to be superior to pam_tally2, particularly concerning handling of screensaver handling. pam_faillock is part of the recommended RHEL configuration for secured computers and holding out for pam_tally2 also presents a nasty non-uniformity for nearly the same functionality (although, weaker). I've asked the author, Tomas Mraz, to make the patch available standalone - which he has provided here: http://people.redhat.com/tmraz/pam_faillock/ I would've have submitted my branch against factory pam incorporating the patch - but unfortunately I seem to be having some automake/libtool issues in the build that I cannot figure out - so I'm going to have to leave that effort to someone who knows those build tools better than I. I also intend to poke upstream to ask them to reconsider adding that patch into master. -Jason -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] nouveau xorg.conf.d
by mh＠mike.franken.de 17 Jan '17

17 Jan '17

Hi *, I'm still trying to switch somehow automatically between the nvidia and the nouveau driver, but I ran into a quite annoying problem on both openSuSE Leap 42.2 (even with the latest kernel from the kernel stable repository) and also with the latest Tumbleweed snapshot. I don't have problems, running the nouveau driver if I don't have an xorg.conf.d structure at all, but even with a very tiny structure the X server won't start anymore, and I can't figure out, what I might be missing here. There are three scenarios: 1. No xorg.conf.d structure at all -> nouveau gets loaded, X is starting. Same behaviour with Leap 42.2 ad with Tumbleweed. 2. Tiny xorg.conf.d structure as shown below with a driver entry for nouveau, i.e. Driver "nouveau" -> X server is not starting with an entry "Unknown chipset: NV117" at the end of Xorg.0.log. Same behaviour with Leap 42.2 ad with Tumbleweed. 3. Tiny xorg.conf.d structure as shown below without a driver entry for nouveau -> X server is starting and one can logon via sddm, but a few program starts later, the nouveau driver is crashing with errors like "nouveau 0000:01:00.0: fifo: PBDMA0: 00040000 [PBENTRY] ch 15 [007e351000 X[1413]] subc 0 mthd 0000 data 00000000". This happens with Leap 42.2 only, not with Tumbleweed - with the exact same modules from kernel 4.8.9-1. This is my xorg.conf.d structure: # 00-keyboard.conf: # ................. Section "InputClass" Identifier "system-keyboard" MatchIsKeyboard "on" Option "XkbLayout" "de" Option "XkbModel" "pc105" Option "XkbOptions" "terminate:ctrl_alt_bksp" EndSection # ----------------------------- # 50-device.conf: # ............... Section "Device" Identifier "NVidia_GTX750" Driver "nouveau" EndSection # ----------------------------- # 50-module.conf: # ............... Section "Module" # Disable "glx" EndSection # ----------------------------- # 50-monitor.conf: # ................ Section "Monitor" Identifier "DELL_U2715H" EndSection # ----------------------------- # 50-screen.conf: # ............... Section "Screen" Identifier "Screen_0" Device "NVidia_GTX750" Monitor "DELL_U2715H" EndSection # ----------------------------- # 99-serverlayout.conf: # ..................... Section "ServerLayout" Identifier "SingleHead_Layout" Screen "Screen_0" EndSection # ----------------------------- Any idea, what might be going on here? Thx! Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 34

[opensuse-factory] Dropping of gstreamer-0_10 from Factory
by Atri Bhattacharya 12 Jan '17

12 Jan '17

Dear Tumbleweed users, For the last few months, several people have worked on porting packages dependent on gstreamer v0.10 to updated gstreamer 1.x, and we are left with only a few (unmaintained by upstream?) packages in Factory which are still dependent on the old version and are not portable in a straightforward way. These are (apart from gstreamer-0_10 plugins): * freqtweak * ignuit * kde3-kaffeine * kdemultimedia3 * libucil * moodbar * morituri * pgadmin3 * psi+-plugins-psimediaplugin * python-gstreamer-0_10 * sffview * wxWidgets * wxWidgets-ansi * wxWidgets-wxcontainer * xfce4-mixer * xfce4-volumed I would like to now (in a couple of days) file drop requests for the entire gstreamer-0_10 stack for openSUSE:Factory. This is a consequence of the lack of upstream support for gstreamer < 1.0 (GStreamer 1.0 was released on September 24, 2012), which makes, for instance, security issues such as [1] difficult to track and fix. Having this in the Tumbleweed distro is therefore ill-advised. For Leap starting with 42.3 and beyond, we are, of course, dependent on SUSE for decisions relating to the dropping of gst 0.10, and I understand that it is expected to be maintained at least for the life- times of 42.x releases (please correct me if I am wrong). To summarise, the gstreamer version 0.10.x stack (zypper se gstreamer- 0_10*) will soon be dropped from Factory, which will thereafter only carry upstream maintained stable releases of gstreamer 1.x. If you are a maintainer of any of the above pkgs, please consider patching your app to work with gstreamer 1.x to prevent them from becoming "unresolvable" soon. Thanks for bearing with my long email, and wish everyone a very happy holiday season. Have a lot of fun! [1] https://build.opensuse.org/request/show/447173 -- Atri Bhattacharya Sun 25 Dec 16:49:47 IST 2016 Sent from openSUSE Tumbleweed on my laptop. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 13

[opensuse-factory] updating tumbleweed - best practices
by nicholas 02 Jan '17

02 Jan '17

from experience and looking around forums, how to update tumbleweed correctly is not obvious, and not clearly presented. The lack of guidence is causing confusion and problems. The rest of this post is based on my ASSUMPTION that 'sudo zypper dup --no- allow-vendor-change' is best practice. Forums are filled with confusion over the update process e.g. https://forums.opensuse.org/showthread.php/517451-Differnce-between-zypper-… I have seen other suggestions of (including by forum global moderator) 'zypper up' mostly, 'zypper dup' occasionally, this is without clarfying to disable extra repos. https://forums.opensuse.org/showthread.php/504212-I-get-no-updates-to-Tumbl… there are also MANY implicit postings of problems suggesting the OP is not even aware of the issues. The current update process would appear: non-evident (not communicated, ambiguous (when to up/dup?), non deterministic (its ok to get out of sync sometimes?), error prone (new user forgets to disable extra repos), time consuming mess. in fact, do zypper up/dup really make sense conceptually or functionally to a rolling distribution? The question, IF the 'no allow vendor change' is best practice, should we make a more accessible command for updating out of the box (i.e. zypper tup/or other) and should best practices not be better communicated to new users? - I have 'alias tup=sudo zypper dup --no-allow-vendor-change' in .bashrc - Is the dup default of allow-vendor-change really required for leap upgrade? [my own learning curve was quite painful, you should not underestimate the conceptual overhead to new user of understanding all the zypper ins and outs regarding 'packages not being updated', 'changing vendor' etc -> your basically expecting the noob to learn *everything* in order to get a working and reliable system within the first few months] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

22 72

[opensuse-factory] What happened to the usr merge?
by Ruediger Meier 02 Jan '17

02 Jan '17

Hi, some years ago we've had big discussions about it... But know the direcories are still not merged and we still have hundreds of duplicate links in /bin and /usr/bin. Some binaries are still only available in /bin. Still many horrible looking spec files. So lazy usr-merge supporters, please finish your job and cleanup the mess. cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

17 57