June 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] acpid requires systemd?
by Felix Miata 25 Apr '24

25 Apr '24

Can this be true? If so, why? Zypper won't let me upgrade acpid without breakage unless systemd is installed too. I have systemd locked out, as I'd rather test things I can understand in Factory, not major overhaul stuff. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

Re: [opensuse-factory] repository priorities with Tumbleweed
by Thomas Langkamp 16 Jul '15

16 Jul '15

> No, please don't confuse people, if you add more repos than just > Tumbleweed you really had better know what you are doing or bad things > can, and will, happen :) I understand. I just would like to add the following to http://en.opensuse.org/Portal:Tumbleweed - between ## is the new stuff: "The only supported method of repo use for Tumbleweed is to have only the main repos (Oss, Non-oss, and Update) and the Tumbleweed repo active. ## If you use more repositorys you have to know how repo-priorities work, but even then Tumblweed does NOT support this ## " It would also be good to move this information to "Special concerns" and to move the whole "Special concerns"-section up. For example "Special Concerns Virtual Machines ... Third Party Drivers ... ## Non-Standard Repos: Only use Oss, Non-oss, and Update combined with the Tumbleweed-Standard repo. Everything else is not supported and might break the system ## " >You do know the legal reasons behind why packman is there, right? Yes. Then I do not whish you personaly to support Packman with TW - I understand now that this is not possible from your perspectivg. But...as the OS community discusses right now if/how to strengthen Tumbleweed... one way would be, that Packman+TW would be supported BY Packman. So I will ask the Packman-guys to do that... I hope this is possible for them. Without Packman Tumbleweed is so ... "anti-multimedia" ;) thanks anyway :D -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 18

[opensuse-factory] Export broken for KinfoCenter
by Roger Luedecke 30 Jan '15

30 Jan '15

Export button is greyed out no matter what. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Package - libhal1-flash (re-enabling Flash-Player DRM content on Linux)
by Christopher Horler 13 Sep '14

13 Sep '14

Good afternoon! I've written and packaged a compatibility library for flash to enable playback of DRM content (this removes the dependency on the HAL package). I'd like to know what steps I can take to have the package considered for inclusion in openSUSE 12.3 and 13.1. Can I submit the package to devel:openSUSE:Factory, or is there another action I should be taking? Details of the bug and links to upstream are here (please briefly review): https://bugzilla.novell.com/show_bug.cgi?id=768562#c19 OBS location: https://build.opensuse.org/package/show?package=hal-flash&project=home%3Ach… I will maintain the package until such time that HTML5 Video content is a viable alternative or the Flash plugin is completely withdrawn. RPMs, debs... are all available on the build service. Three noteworthy points: - package naming (libhal1-flash) doesn't 100% align with the Shared Library Policy (I've suffixed -flash to make clear this is not a fully functional HAL layer and also to avoid naming conflicts as some distros seem to have a shared library package already named libhal1). - The packages depends on dbus and udisks. It seems to work find when udisks is launched on demand (as for openSUSE 12.3) - The flash-player package could have some kind of RPM dependency on this package to assist the user when looking in YaST (Install / Remove Software) / Package Manager. Chris -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] source_validator error: signature does not validate
by Kyrill Detinov 25 Aug '14

25 Aug '14

Hello. I can't build a package. Service source_validator failed. % osc build Run source service: /usr/lib/obs/service/format_spec_file --outdir /tmp/tmpVbBhay Run source service: /usr/lib/obs/service/source_validator --outdir /tmp/tmpIQYU6i /home/kent/rpmbuild/projects/M17N/i18nspector/i18nspector.keyring gpg: enabled debug flags: memstat gpg: keyring `/tmp/check_if_valid_source_dir-NL8Ezs/.checkifvalidsourcedir-gpg-keyring' created gpg: Oops: keyid_from_fingerprint: no pubkey gpg: Oops: keyid_from_fingerprint: no pubkey gpg: key 00000000 occurs more than once in the trustdb gpg: key 015475F5: public key "Jakub Wilk <jwilk(a)jwilk.net>" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) random usage: poolsize=600 mixed=0 polls=0/0 added=0/0 outmix=0 getlvl1=0/0 getlvl2=0/0 secmem usage: 0/32768 bytes in 0 blocks gpg: enabled debug flags: memstat gpg: Signature made Mon Jun 24 22:36:51 2013 MSK using RSA key ID 015475F5 gpg: Oops: keyid_from_fingerprint: no pubkey gpg: Oops: keyid_from_fingerprint: no pubkey gpg: key 00000000 occurs more than once in the trustdb gpg: Good signature from "Jakub Wilk <jwilk(a)jwilk.net>" gpg: aka "Jakub Wilk <jwilk(a)debian.org>" gpg: aka "Jakub Wilk <ubanus(a)users.sf.net>" random usage: poolsize=600 mixed=0 polls=0/0 added=0/0 outmix=0 getlvl1=0/0 getlvl2=0/0 secmem usage: 0/32768 bytes in 0 blocks (E) signature /home/kent/rpmbuild/projects/M17N/i18nspector/i18nspector-0.11.1.tar.gz.asc does not validate Aborting: service call failed: /usr/lib/obs/service/source_validator --outdir /tmp/tmpIQYU6i Source service run failed! As far as I can see, the signature is good. This also happens with another package (graphics/icoutils). What is the problem? -- WBR Kyrill

2 5

[opensuse-factory] YaST2 "install/remove" doesn't display solver diagram
by Kyrill Detinov 13 Jan '14

13 Jan '14

Hello. There is a regression in YaST2 *Qt* "install/remove software" module. It doesn't show solver diagram. First, no dependencies on libqdialogsolver. Second, installed libqdialogsolver doesn't help. Reported ages ago. And confirmed. All the info is provided. https://bugzilla.novell.com/show_bug.cgi?id=785431 WBR Kyrill

3 3

Re: [opensuse-factory] Nothing provides /usr/bin/php5
by Sascha Peilicke 11 Jan '14

11 Jan '14

On 12/01/2011 11:44 AM, Kyrill Detinov wrote: > > Hello. > > We have one package affected in standard repo: leechcraft-eiskaltdcpp. > The program itself doesn't require php5. But the package includes > example scripts with shebang '!/usr/bin/php5'. So the package isn't > installable. > > Also I see the same problem with pgfouine from Contrib (written in > PHP) and eiskaltdcpp from filesharing repo. Maybe more in third-party > repositories. > > Can we have symlink /usr/bin/php -> php5 in php5 package? Or affected > packages should be fixed? > Please file a bug against php5 and assign to Cristian Rodríguez. -- Viele Grüße, Sascha -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

Re: [opensuse-factory] SOLVED: postfix does not run
by Christian Boltz 06 Nov '13

06 Nov '13

Hello, Am Freitag, 22. März 2013 schrieb Patrick Shanahan: > /etc/postfix/main.cf had @_some-parameter_@ setting for every > "xxxxxxx_directory =" line. > > After correcting "xxxxxxxx_directory =" settings per my Tumbleweed > machine, postfix appears working correctly. > > This mess probably occurred on installing/upgrading postfix: > postfix-2.9.6-2.1.x86_64 Sun Mar 10 11:14:39 2013 > but the rpm main.cf does not contain "@.............@". This sounds like https://bugzilla.novell.com/show_bug.cgi?id=796162 which should be fixed since some time. I'd guess some older postfix package broke your main.cf. Nevertheless, if you want to be really sure, uninstall postfix, move away /etc/postfix and re-install the postfix package. Regards, Christian Boltz -- Argh, ich wollte heute doch gar nicht mehr siggen! [Michael Hoffmann in dag°] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Warning: new systemd version landing in Factory
by Frederic Crozat 20 Sep '13

20 Sep '13

Hi all, systemd v202 should be landed in Factory soon. It contains a lot of changes (and bug fixes) compared to v195 we had in 12.3, like (this is an extract from the .changes I wrote): + udev now supports different naming policies for network interface for predictable names (this one is disabled by /usr/lib/tmpfiles.d/network.conf until network team had a chance to look at it and test it). This should be enabled by default in Factory soon (see http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfac… ) This can be also be turned off with kernel command line switch: net.ifnames=0 (when the tmpfiles.d is removed in the near future) + udev gained support for loading additional device properties from an indexed database. %udev_hwdb_update macro should be used by packages adding entries to this database. + Journal gained support for "Message Catalog", indexed database to link up additional information with journal entries. %journal_catalog_update macro should be used by packages adding %entries to this database. + New rpm macros has been added: %udev_rules_update(), %_udevhwdbdir, %_udevrulesdir, %_journalcatalogdir, %_tmpfilesdir, %_sysctldir. + "age" field for tmpfiles entries can be set to 0, forcing removal of files matching this entry. + coredumpctl gained "gdb" verb to invoke gdb on selected coredump. + In service files, %U can be used for configured user name of the service. + nspawn can be invoked without a controlling TTY. + systemd and nspawn can accept socket file descriptors when started for socket activation. This allow socket activated nspawn containers. + logind can now automatically suspend/hibernate/shutdown system on idle. + ConditionACPower can be used in unit file to detect if AC power source is connected or if system is on battery power. + EnvironmentFile= in unit files supports file globbing. + Behaviour of PrivateTmp=, ReadWriteDirectories=, ReadOnlyDirectories= and InaccessibleDirectories= has changed. The private /tmp and /var/tmp directories are now shared by all processes of a service (which means ExecStartPre= may now leave data in /tmp that ExecStart= of the same service can still access). When a service is stopped its temporary directories are immediately deleted (normal clean-up with tmpfiles is still done in addition to this though). + Resource limits (as exposed by cgroup controlers) can be controlled dynamically at runtime for all units, using "systemctl set-cgroup-attr foobar.server cgroup.attribute value". Those settings are stored persistenly on disk. + systemd-vconsole-setup will now copy all fonts settings to all allocated VTs. + timedated now exposes CanNTP property to indicate if a local NTP service is available. + pstore file system is mounted by default, if available. + SMACK policies are loaded at early boot, if available. + Timer units now support calendar time events. + systemd-detect-virt detect xen PVs. + Some distributions specific LSB targets has been dropped: $x-display-manager, $mail-transfer-agent, $mail-transport-agent, $mail-transfer-agent, $smtp, $null. As well mail-transfer-agent.target and syslog.target has been removed. + systemd-journal-gatewayd gained SSL support and now runs as unprivileged user/group "systemd-journal-gateway:systemd-journal-gateway" + systemd-analyze will read, when available, boot time performance from EFI variable from boot loader supporting it. + A new generator for automatically mounting EFI System Partition (ESP) to /boot (if empty and no other file system has been configured in fstab for it). + logind will now send out PrepareForSleep(false) out unconditionally, after coming back from suspend. + tmpfiles gained a new "X" line type, that allows configuration of files and directories (with wildcards) that shall be excluded from automatic cleanup ("aging"). + udev default rules set the device node permissions now only at "add" events, and do not change them any longer with a later "change" event. + A new bootctl tool has been added that is an interface for certain EFI boot loader operations. + A new tool kernel-install has been added to install kernel images according to Boot Loader Specification. + A new tool systemd-activate can be used to test socket activation. + A new group "systemd-journal" is now owning journal files, replacing "adm" group. + journalctl gained "--reverse" to show output in reverse order, "--pager-end" to jump at the end of the journal in the pager (only less is supported) and "--user-unit" to filter for user units. + New unit files has been addedto ease for systemd usage in initrd. + "systemctl start" now supports "--irreversible" to queue operations which can be reserved. It is now used to make shutdown requests more robust. + Auke Kok's bootchart has been merged and relicensed to LGPLv2.1+. + nss-myhostname has been merged in systemd codebase. + some defaults sysctl values are now set by default: the safe sysrq options are turned on, IP route verification is turned on, and source routing disabled. The recently added hardlink and softlink protection of the kernel is turned on. + journald will now explicitly flush journal files to disk at the latest 5 min after each write and will mark file offline until next read. This should increase reliability in case of crash. + remote-fs-setup.target target has been added to pull in specific services when at least one remote file system is to be mounted. + timers.target and paths.target have been added as canonical targets to pull user timer and path units, similar to sockets.targets. + udev daemon now sets default number of worker processes in parallel based on number of CPUs instead of RAM. + Most unit file settings which takes likst of items can now be reset by assigning empty string to them, using drop-in. + Add support for drop-in configuration file for units. + Most unit file settings which takes likst of items can now be reset by assigning empty string to them, using drop-in. + 'hostnamectl set-hostname' allows setting FQDN hostnames. + fractional time intervals are now parsed properly. + localectl can list available X11 keymaps. + systemd-analyze dot can filter for specific units and has been rewritten in C. + systemctl gained "list-dependencies" command. + Inhibitors are now honored no only in GNOME. + 'systemctl list-jobs' got some polishing. '--type=' argument may now be passed more than once. 'systemctl list-sockets' has been added. + systemd gained a new unit 'systemd-static-nodes.service' that generates static device nodes earlier during boot, and can run in conjunction with udev. + systemd-nspawn now places all containers in the new /machine top-level cgroup directory in the name=systemd hierarchy. + bootchart can now store its data in the journal. + journactl can now take multiple --unit= and --user-unit= switches. + The cryptsetup logic now understands the "luks.key=" kernel command line switch. If a configured key file is missing, it will fallback to prompting the user. -- Frederic Crozat <fcrozat(a)suse.com> SUSE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 31

[opensuse-factory] /boot partition is too small when you selected "Create LVM Based Proposal"in "Suggested Partitioning" on installer .
by 1xx 15 Sep '13

15 Sep '13

Hi all . When I selected "Create LVM Based Proposal" in "Suggested Partitioning" on installer, Installer suggested "Create boot volume /dev/sda1 (156.88 MB)" . But it is too small for for updating the kernel . The present state is as follows. Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 154691 108188 38516 74% /boot rpm -qa 'kernel-desktop' kernel-desktop-3.7.10-1.16.1.x86_64 kernel-desktop-3.7.10-1.11.1.x86_64 Disk storage capacity runs short in update of the next kernel . In the past, disk storage capacity actually ran short by update of the kernel . I think that the /boot partition should be more than 256 M byte required. (ex: 1 G byte) I wrote https://bugzilla.novell.com/show_bug.cgi?id=826981 . I want you to tell your opinions . -- 1xx <ItSANgo(a)gmail.com> <https://twitter.com/ItSANgo> <http://d.hatena.ne.jp/Itisango/> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

23 47

[opensuse-factory] openqa/factory lamp testing question
by doiggl＠velocitynet.com.au 19 Aug '13

19 Aug '13

Hello, I have a openqa/factory question:Perhaps for Bernhard. Can a test LAMP[1] be included in the openqa tests,to test the lamp software stack works with some software which uses all these components, see example see[2], The install output listed at[3] I have not tested the configuration settings yet as I have not been able to get apache2 part going yet. Thanks Glenn [1] definition Linux (operating system), Apache HTTP Server, MySQL (database software), and PHP, Perl or Python http://en.wikipedia.org/wiki/LAMP_%28software_bundle%29 [2] LAMP_setup and software setup - http://en.opensuse.org/SDB:LAMP_setup - http://en.opensuse.org/Cacti changed/updated instructions to suit newer version of cacti. zypper ar http://download.opensuse.org/repositories/server:/monitoring/openSUSE_Facto… server:monitoring zypper in cacti cacti-plugin-autom8 cacti-plugin-boost cacti-plugin-clog cacti-plugin-cycle cacti-plugin-discovery cacti-plugin-docs cacti-plugin-flowview cacti-plugin-hostinfo cacti-plugin-loginmod cacti-plugin-mactrack cacti-plugin-monitor cacti-plugin-npc cacti-plugin-ntop cacti-plugin-realtime cacti-plugin-routerconfigs cacti-plugin-settings cacti-plugin-ssl cacti-plugin-syslog cacti-plugin-thold cacti-plugin-tools cacti-plugin-update cacti-plugin-weathermap [3] install output Loading repository data.. Reading installed packages.. Resolving package dependencies.. The following NEW packages are going to be installed: cacti cacti-plugin-autom8 cacti-plugin-boost cacti-plugin-clog cacti-plugin-cycle cacti-plugin-discovery cacti-plugin-docs cacti-plugin-flowview cacti-plugin-hostinfo cacti-plugin-loginmod cacti-plugin-mactrack cacti-plugin-monitor cacti-plugin-npc cacti-plugin-ntop cacti-plugin-realtime cacti-plugin-routerconfigs cacti-plugin-settings cacti-plugin-ssl cacti-plugin-syslog cacti-plugin-thold cacti-plugin-tools cacti-plugin-update 22 new packages to install. Overall download size: 7.7 MiB. After the operation, additional 22.5 MiB will be used. Continue? [y/n/?] (y): Retrieving package cacti-0.8.8a-14.2.noarch Installing: cacti-plugin-boost-5.1-2.3 ............................................................[done] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 14

[opensuse-factory] On kmod-compat replacing m-i-t
by Jan Engelhardt 08 Aug '13

08 Aug '13

Currently, the only package that still blocks the removal of module-init-tools from a system is the kernel rpm package, with an express dependency "module-init-tools >= 3.4". What is so particular about m-i-t 3.4? Can it be replaced by modutils, or do we need to add some virtual Provides: mitmagic34 to both module-init-tools.spec and kmod-compat.spec? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 8

[opensuse-factory] Tumbleweed update today breaks vlc from packman
by Patrick Shanahan 30 Jul '13

30 Jul '13

09:58 Crash: ~ > vlc VLC media player 2.0.6 Twoflower (revision 2.0.6-0-gbe9623c) Segmentation fault 09:58 Crash: ~ > rpm -q --last vlc vlc-2.0.6-116.4.x86_64 Thu 25 Apr 2013 09:50:02 AM EDT ?? tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 30

Re: [opensuse-factory] 12.3 RC1 R128 trouble (was: ...install mysteries)
by Felix Miata 12 Jul '13

12 Jul '13

On 2013-02-18 16:40 (GMT+0100) Roger Oberholtzer composed: > I am installing 12.3 RC1 on a machine that happily runs earlier versions > of openSUSE. The graphics is, admittedly, an older ATI Rage XL (MACH64). > It runs as a server, and this is on the MB. It is usually only seen > during install. > The install was a bit of a PITA because, no matter what display I used, > I could not get a graphic install to work. I tried setting various > resolutions and even 'No KMS' in the initial install screen. The screen > would go black, and I could do nothing. No virtual terminals. Nothing. > Eventually I had settle for the text install. Using 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage Mobility M3 AGP 2x (rev 02) here. 11.4 works OK. I installed HTTP started by Grub using latest factory-snapshot with nomodeset on cmdline. Graphical install worked fine, though slow with only 384M RAM, but resulting X is unusable. The left half of the screen is fine, but the right side is a mess, as if there were some kind of buffer misalignment repeating portions and omitting others. Using nomodeset produces mostly black screens with colored lines in various places at various times in attempting to start the login manager, and kills keyboard. Bunch of Xorg.0.log files: http://fm.no-ip.com/Tmp/Linux/Xorg/os123r128/ Anyone looked for a match to any of these upstream R128 bugs? http://tinyurl.com/bz5lfmv I've commented in the last bug in that list. Exiting X makes the system unresponsive to keyboard and mostly empties the screen to black. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Milestone #2 and nouveau driver
by Basil Chupin 11 Jul '13

11 Jul '13

What incantations does one need to use and how many times does one need to wave a chicken foot while doing so to get rid of the nouveau driver in Milestone #2, please? :-) I want to install nVidia driver 319.23 but it won't "go in" because the nouveau driver refuses to be dismissed even though I have removed it using YaST and it is blacklisted in all the right places. :-( BC -- Using openSUSE 12.3, KDE 4.10.4 & kernel 3.9.6-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 23

[opensuse-factory] automounting USB devices with xfce on 12.3
by Karl Eichwalder 05 Jul '13

05 Jul '13

I usually update my system with the traditional yast method. Now on 12.3, xfce no longer automounts devices in my USB card-reader. I think it used to work on 12.2, and it definitely work on a 12.3 installation from scratch. How can I debug this on my updated 12.3 system? Do others suffer from the same? If yse, I'd create a bug. -- Karl Eichwalder SUSE LINUX Products GmbH R&D / Documentation Maxfeldstraße 5 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 9

[opensuse-factory] Why systemd over upstart?
by Linda Walsh 01 Jul '13

01 Jul '13

Was just looking for performance articles on boot and ran into upstart -- it seems somewhat similar to systemd in that it is a replacement -- but it's design was for performance and reliability -- things that systemd doesn't seem to emphasize. Also its well documented (http://upstart.ubuntu.com/cookbook/ also in the form of a 183p PDF). and has been in use for a few years -- so it's not alpha quality like systemd. Even fedora has used it -- though I guess they are switching to systemd? I just couldn't help but notice the large amound of examples and docs -- as well as a service scripting language -- something systemd fails hard on. So why go for an unfinished alpha over upstart? Advantages? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 15

[opensuse-factory] What's happened with ImageMagick (XPM issue)?
by Kyrill Detinov 30 Jun '13

30 Jun '13

Hello. I see, ImageMagick doesn't recognize XPM files now. % identify logo_48.xpm identify: unrecognized color `None' @ warning/color.c/GetColorCompliance/947. identify: corrupt image `logo_48.xpm' @ error/xpm.c/ReadXPMImage/391. AFAIK color 'None' (transparent) is valid. Reference: http://ftp.x.org/contrib/libraries/xpm-FAQ.html http://www.fileformat.info/format/xpm/egff.htm The file: http://susepaste.org/view/raw/84491063 -- WBR Kyrill

2 3

[opensuse-factory] List of Failures in staging projects
by Stephan Kulow 30 Jun '13

30 Jun '13

Hi, In case someone is bored today, here are the list of build failures ;) openSUSE:Factory:Staging:Gcc48 capi4hylafax ccache gjdoc gnome-session go go-Go-OpenGL inkscape libgcj47 libopensync libopensync-plugin-opie libsatsolver lighttpd lilo mISDNuser mozc openttd-opengfx perf ppl-testsuite python3-base samba strigi uwsgi v8 xplatproviders openSUSE:Factory:Staging:perl518 ack apache2-mod_perl apparmor automake-testsuite collectd devscripts hugin kdeaddons3 kdebase3 kdebindings3 libcamgm lighttpd perf perl-MIME-tools perl-PDF-API2 perl-Template-Toolkit perl-Tk po4a rsnapshot samba squid stellarium wireshark xen Please note that would like to go forward with these projects, so I really need people to look at their or other packages. Some packages are of course more important than others, but e.g. samba is on both lists ;( Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 19

[opensuse-factory] Booting problems with current factory
by Stephan Kulow 29 Jun '13

29 Jun '13

Hi, It looks like I just broke my laptop by updating to factory, I can't get past the initrd with something that sounds like broken storage setup in systemd/mkinitrd/udev. So I advise everyone not to update before I found out it was my fault :) Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

19 63

[opensuse-factory] Gala (Pantheon's Window Manager) Port to openSUSE and Libclutter
by Antoine Saroufim 29 Jun '13

29 Jun '13

Good Day, I'm attempting to port Pantheon, the Elementary Desktop Environment, to openSUSE. With the correct dependencies installed, the process is relatively easy. Alien can make .RPM packages out pf most .deb files. I managed to get most of the desktop working as it would work on Ubuntu 13.04. However, Gala requires a different version of libclutter that conflicts with the one provided in the repositories of openSUSE 12.3. Gala would be extremely choppy and almost unusable if Elementary's Libclutter isn't installed, and if it is installed, GDM and Lightdm-gtk-greeter wouldn't be able to run. In short, Gala needs a libclutter version that would conflict with openSUSE 12.3. Coding Gala to use a newer version of Libclutter is beyond my skill and so is making Gala use an exclusive version of the library. Would anyone be interested in porting Gala to openSUSE 12.3? Sincerely, Antoine Saroufim -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] udev directory became symlink - not
by Jan Engelhardt 28 Jun '13

28 Jun '13

On Wednesday 2013-06-26 09:18, coolo(a)suse.com wrote: > >State of submit-request #180899 was changed by coolo: > review -> declined >Comment: > found conflict of bcache-tools-0.1.g45-1.1.x86_64 with udev-204-6.1.x86_64: > - /lib/udev [mode mismatch: d755 root:root, g l777 root:root] Now, I am looking at my Factory VM and find that (prior to installation of any bcache-tools) /lib/udev is still a directory and not a symlink. Frederic, please note that rpm is still incapable of replacing a non-symlink object with a symlink object. This now means my /lib/udev is empty rather than a symlink :-/ Not that *I* am expecting breakage, but it might just be there, somewhere. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 8

[opensuse-factory] drop of ldapsmb for post openSUSE 12.3
by Lars Müller 28 Jun '13

28 Jun '13

Hi, we like to drop ldapsmb from any openSUSE product newer than 12.3. If you still use it and believe it still has any value and not only defects it's up to you to speak up now. Else we'll remove it from the Samba spec file for all post-12.3 in a week from now. Cheers, Lars -- Lars Müller [ˈlaː(r)z ˈmʏlɐ] Samba Team + SUSE Labs SUSE Linux, Maxfeldstraße 5, 90409 Nürnberg, Germany

2 2

[opensuse-factory] GNOME 3.9.3 for Factory?
by Dominique Leuenberger a.k.a. Dimstar 28 Jun '13

28 Jun '13

Hi all, As you're all aware, the plan for openSUSE 13.1 is to include GNOME 3.10 (12.3 was shipped with GNOME 3.6, with 3.8 as 'addon repo'). Now, of course, 3.10 is not going to be released before September... but we have GNOME 3.9.3 ready in GNOME:Factory and I for one run this on my machine with limited issues. Are you all ready and willing to get the new 3.9.x dumped upon you? Due to the early dev state of it, there are surely some things here and there that still need fixing, but the soon we can get 'users' on the platform, the better the chances to get some issues solved here and there. So the short question is really: Shall we submit GNOME 3.9.x to Factory? If we do this now, then I'd say we have a perfect chance that users coming to oSC13 and running Factory have a chance to have this usable (or not :) ). There is currently only 'one blocker' on my radar: gnome-control-center segfaults on startup (due to one of our own patches). Cheers, Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 13

[opensuse-factory] python ssl module
by Guido Berhoerster 28 Jun '13

28 Jun '13

Why is the python ssl module not provided by the python module any more? It seems to have vanished after a recent version upgrade and there isn't even an explanation in the changelog. This currently causes build failures for offlineimap. -- Guido Berhoerster -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7