May 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] New package python-imagestore
by Benny Gaechter 08 May '13

08 May '13

Hi I just created a package for python imagestore which is a popular image gallery solution for django projects. I already submited the pacakge successfully to devel:language:python and would like to add it now to openSUSE:Factory. Regards Benny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] submit theme packages
by Damian Ivanov 08 May '13

08 May '13

Hi all, I have a few icon/cursor/kwin etc themes lying around as rpm's. To which Project to submit so they get into Factory in the end? br Damian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] MS-fonts don't perform well as defaults
by colAflash＠gmx.net 07 May '13

07 May '13

Hi, currently /usr/share/fontconfig/conf.avail/58-suse-post-user.conf defines the Mircosoft fonts Arial (sans serif), Times New Roman (serif) and Consolas (monospace) as defaults. So they are used if installed by package "fetchmsttfonts". I get 2 problems from this: 1. The gui design changes when installing "fetchmsttfonts", at least for the monospace font-family. I think for the "sans serif" and "serif" families openSUSE delivers fonts it bought which try to look like "Arial" "Times New Roman" so these font-families look may not change. Usually I want to install "fetchmsttfonts" because I get office documents using those fonts and I want them to be displayed as intended or I work with someone on a document using those fonts. But I don't want them as default! 2. "Arial", "Times New Roman" and "Consolas" perform bad. For example Consolas doesn't gives me the dots above the german "Ö" when using sizes smaller then 10pt. For me the free DejaVu family seems to work quite well. Now I'm working with a default fontsize of 8 in X which was completely unusable with MS-fonts. https://en.wikipedia.org/wiki/DejaVu_fonts Debian and Ubuntu use "Bitstream Vera" and DejaVu (which is based on "Bitstream Vera") as default. https://en.wikipedia.org/wiki/Bitstream_Vera Wikipedia tells "Bitstream Vera" misses much symbols. So DejaVu might be the the better choice. What do you think about setting the DejaVu family as default for the next openSUSE? Thanks colAflash -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 14

[opensuse-factory] Whom is allowed to access %{_localstatedir}/lib/xdm/authdir
by Raymond Wooninck 07 May '13

07 May '13

Hi, An old issue with KDM got resolved recently and now the KDM Displaymanager is running under the userid KDM instead of the old time favorite root. This seems to fail as that access to certain directories are not granted as that those have been setup very restrictive. One of these directories are %{_localstatedir}/lib/xdm/authdir which comes with the xdm package. Is it indeed correct that root is the only user allowed to access this directory or can we make it looser and allow that users like kdm, gdm, etc can access them ? Thanks Regards Raymond -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] help wanted - Getting apache2 going on opensuse - 127.0.0.1
by doiggl＠velocitynet.com.au 06 May '13

06 May '13

Hello, I am trying to get apache going on opensuse - 127.0.0.1 and get this error[1] when attempting to connect to localhost - apache rpms installed[2] - errors listed[3] - I used this documentation http://en.opensuse.org/SDB:Apache_installation. - /etc/sysconfig/apache2 settings see [4] What else needs to be adjusted to get apache going on 127.0.0.1 Thanks Glenn [1] Unable to connect Firefox can't establish a connection to the server at 127.0.0.1. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. [2] # rpm -qa | grep -i apache |sort apache2-2.4.3-1.1.x86_64 apache2-devel-2.4.3-1.1.x86_64 apache2-doc-2.4.3-1.1.noarch apache2-event-2.4.3-1.1.x86_64 apache2-example-pages-2.4.3-1.1.x86_64 apache2-mod_perl-2.0.7+svn1448242-1.1.x86_64 apache2-mod_php5-5.4.14-1.1.x86_64 apache2-prefork-2.4.3-1.1.x86_64 apache2-utils-2.4.3-1.1.x86_64 apache2-worker-2.4.3-1.1.x86_64 perl-Apache-AuthCookie-3.18-7.1.noarch perl-Apache-DBI-1.11-6.1.x86_64 perl-Apache2-AuthCookieDBI-2.14-6.1.noarch rubygem-passenger-apache2-3.0.19-1.2.x86_64 [3]errors # systemctl status apache2.service apache2.service - The Apache Webserver Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled) Active: failed (Result: exit-code) since Mon, 2013-05-06 18:34:34 EST; 5min ago Process: 12055 ExecStop=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k graceful-stop (code=exited, status=1/FAILURE) Process: 12027 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/apache2.service May 06 18:34:34 test.site start_apache2[12027]: Module "authz_default" is not installed, ignoring. May 06 18:34:34 test.site start_apache2[12027]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. May 06 18:34:34 test.site start_apache2[12027]: AH00526: Syntax error on line 1 of /etc/apache2/uid.conf: May 06 18:34:34 test.site start_apache2[12027]: Invalid command 'User', perhaps misspelled or defined by a module not included in the server configuration May 06 18:34:34 test.site systemd[1]: apache2.service: main process exited, code=exited, status=1/FAILURE May 06 18:34:34 test.site start_apache2[12055]: Module "authz_default" is not installed, ignoring. May 06 18:34:34 test.site start_apache2[12055]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. May 06 18:34:34 test.site start_apache2[12055]: AH00526: Syntax error on line 1 of /etc/apache2/uid.conf: May 06 18:34:34 test.site start_apache2[12055]: Invalid command 'User', perhaps misspelled or defined by a module not included in the server configuration May 06 18:34:34 test.site systemd[1]: Unit apache2.service entered failed state # cat /etc/apache2/uid.conf User wwwrun Group www # zypper in apache2 Loading repository data... Reading installed packages... 'apache2' is already installed. No update candidate for 'apache2-2.4.3-1.1.x86_64'. The highest available version is already installed. # rcapache2 restart redirecting to systemctl restart apache2 # sysconf_addword /etc/sysconfig/SuSEfirewall2 FW_CONFIGURATIONS_EXT apache2 "apache2" already present # sysconf_addword /etc/sysconfig/SuSEfirewall2 FW_CONFIGURATIONS_EXT apache2-ssl "apache2-ssl" already present # rcSuSEfirewall2 restart # rcapache2 start redirecting to systemctl start apache2 # chkconfig -a apache2 # a2enmod php5 # a2enmod -l actions alias auth_basic authn_file authz_host authz_groupfile authz_default authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl userdir reqtimeout php5 # rcapache2 restart redirecting to systemctl restart apache2 [4]/etc/sysconfig/apache2 settings # cat /etc/sysconfig/apache2 ## Path: Network/WWW/Apache/SuSEhelp ## Description: SuSE help doc server configuration ## Type: yesno ## Default: no ## Config: apache ## ServiceRestart: apache ## Command: # # Set this to yes on the central documentation server # or to configure apache for local use of susehelp. # Then the online-help-system indices are automatically adjusted # and access to the help-files is allowed as specified in DOC_ALLOW. # To run as a client for the central documentation server who's name # is specified in DOC_HOST, just set DOC_SERVER to no. # The DOC_HOST and DOC_ALLOW variables are in the file /etc/sysconfig/susehelp. # DOC_SERVER="no" ## Path: Network/WWW/Apache2 ## Description: Configuration for Apache 2 ## Type: string ## Default: "" ## ServiceRestart: apache2 # # Here you can name files, separated by spaces, that should be Include'd from # httpd.conf. # # This allows you to add e.g. VirtualHost statements without touching # /etc/apache2/httpd.conf itself, which makes upgrading easier. # APACHE_CONF_INCLUDE_FILES="" ## Type: string ## Default: "" ## ServiceRestart: apache2 # # Here you can name directories, separated by spaces, that should be Include'd # from httpd.conf. # # All files contained in these directories will be recursively included by apache. # If a pattern like *.conf is appended, apache will use it. # # Examples: "/etc/apache2/my_conf/" # "/etc/apache2/virtual_hosts/*.conf" # "local/*.conf /srv/www/virtual/" # APACHE_CONF_INCLUDE_DIRS="" ## Type: string ## Default: "actions alias auth_basic authz_host authn_file authz_groupfile authz_default authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl suexec userdir php5" ## ServiceRestart: apache2 # # [It might look silly to not simply edit httpd.conf for the LoadModule statements. # However, since the LoadModule statements might need an absolute path to the modules, # switching between MPMs can be quite a hassle. It's easier to just give the names here.] # # * list of all modules shipped with the base distribution: # # actions alias asis auth_basic auth_digest authn_alias authn_anon # authn_dbd authn_dbm authn_default authn_file authnz_ldap authz_dbm # authz_default authz_groupfile authz_host authz_owner authz_user # autoindex bucketeer cache case_filter case_filter_in cern_meta cgi # charset_lite dav dav_fs dav_lock dbd deflate dir disk_cache dumpio # echo env expires ext_filter file_cache filter headers ident imagemap # include info ldap log_config log_forensic logio mem_cache mime mime_magic # negotiation optional_fn_export optional_fn_import optional_hook_export # optional_hook_import proxy proxy_ajp proxy_balancer proxy_connect # proxy_ftp proxy_http proxy_scgi reqtimeout rewrite setenvif speling ssl # status substitute suexec unique_id userdir usertrack version vhost_alias # # see http://httpd.apache.org/docs-2.2/mod/ ! # # * It pays to use IfDefine statements... like # <IfModule mod_xyz.c> # .... # </IfModule> # # * In the APACHE_MODULES variable, you can use mod_xyz or just xyz syntax. # You may also name an absolute path if you like. # # * NOTE ON SSL: before you can use mod_ssl, you need a server certificate. # A test certificate can be created by entering # 'cd /usr/share/doc/packages/apache2; ./certificate.sh' as root. # Also, you need to set the ServerName inside the <VirtualHost _default_:443> # block to the fully qualified domain name (see /etc/HOSTNAME). # * if your server certificate is protected by a passphrase you should increase the # APACHE_START_TIMEOUT (see above) # * to finally enable ssl support, you need to add 'SSL' to APACHE_SERVER_FLAGS # below. # # * modules listed here will be ignored if they are not installed # # # EXAMPLES: # # fairly minimal # APACHE_MODULES="authz_host alias auth dir log_config mime setenvif" # # apache's default installation # APACHE_MODULES="authz_host actions alias asis auth autoindex cgi dir imap include log_config mime negotiation setenvif status userdir" # your settings APACHE_MODULES="actions alias auth_basic authn_file authz_host authz_groupfile authz_default authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl userdir reqtimeout php5" ## Type: string ## Default: "" ## ServiceRestart: apache2 # # Additional server flags: # # Put here any server flags ("Defines") that you want to hand over to # httpd at start time, or other command line flags. # # Background: Any directives within an <IfDefine flag>...</IfDefine> # section are only processed if the flag is defined. # This allows to write configuration which is active only in a # special cases, like during server maintenance, or for testing # something temporarily. # # Notably, to enable ssl support, 'SSL' needs to be added here. # To enable the server-status, 'STATUS' needs to be added here. # # It does not matter if you write flag1, -D flag1 or -Dflag1. # Multiple flags can be given as "-D flag1 -D flag2" or simply "flag1 flag2". # # Specifying such flags here is equivalent to giving them on the commandline. # (e.g. via rcapache2 start -DReverseProxy) # # Example: # "SSL STATUS AWSTATS SVN_VIEWCVS no_subversion_today" # APACHE_SERVER_FLAGS="" ## Type: string ## Default: "" ## ServiceRestart: apache2 # # Which config file do you want to use? # (if not set, /etc/apache2/httpd.conf is used.) # It is unusual to need to use this setting. # # Note about ulimits: # if you want to set ulimits, e.g. to increase the max number of open file handle, # or to allow core files, you can do so by editing /etc/sysconfig/apache2 and # simply write the ulimit commands into that file. # Example: # ulimit -n 16384 # ulimit -H -n 16384 # ulimit -c unlimited # See the output of "help ulimit" in the bash, or "man 1 ulimit". # APACHE_HTTPD_CONF="" ## Type: list(prefork,worker,event,itk) ## Default: "" ## ServiceRestart: apache2 # # MPM (multi-processing module) to use. # # Needed to determine with which MPM apache will run, as well as # against which header files modules will be built. # # If not set, the system will simply pick one of the installed MPMs. # # The implementation of the logic is in /usr/share/apache2/find_mpm, # a script which can be used standalone as well if needed. # APACHE_MPM="" ## Type: string ## Default: "" ## ServiceReload: apache2 # # email address of the server administrator (ServerAdmin directive) # This address is added to the server's responses if APACHE_SERVERSIGNATURE # is set to "email". # # If empty ("") it defaults to webmaster@$FQHOSTNAME, where FQHOSTNAME is # taken from /etc/HOSTNAME. # # Note that ServerAdmin directives inside VirtualHost statements are not # changed, even not the one in the stock SSL virtual host block. # APACHE_SERVERADMIN="" ## Type: string ## Default: "" ## ServiceReload: apache2 # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If this is not set to valid DNS name for your host, server-generated # redirections will not work. See also the UseCanonicalName directive. # # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address anyway, and this will make # redirections work in a sensible way. # APACHE_SERVERNAME="" ## Type: integer ## Default: 2 # # timeout during server startup (seconds) # after this time, the start script decides wether the httpd process started without error. # # Increase it, if you use mod_ssl and your certificate is passphrase protected! # APACHE_START_TIMEOUT="2" ## Type: list(on,off,email) ## Default: "on" ## ServiceReload: apache2 # # Configures the footer on server-generated documents # This correlates to the ServerSignature directive. # APACHE_SERVERSIGNATURE="on" ## Type: list(debug,info,notice,warn,error,crit,alert,emerg) ## Default: "warn" ## ServiceReload: apache2 # # LogLevel: Control the number of messages logged to the error_log. # APACHE_LOGLEVEL="warn" ## Type: string ## Default: "/var/log/apache2/access_log combined" ## ServiceRestart: apache2 # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrarywise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # # Simply set it to empty, if you configure it yourself somewhere else. # # Examples: # # If you would like to have agent and referer logfiles: # # setting it to "/var/log/apache2/referer_log referer, /var/log/apache2/agent_log agent" # corresponds to # CustomLog /var/log/apache2/referer_log referer # CustomLog /var/log/apache2/agent_log agent # # If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format): # # setting it to "/var/log/apache2/access_log combined" # corresponds to # CustomLog /var/log/apache2/access_log combined # APACHE_ACCESS_LOG="/var/log/apache2/access_log combined" ## Type: list(On,Off,DNS) ## Default: "Off" ## ServiceReload: apache2 # # UseCanonicalName: Determines how Apache constructs self-referencing # URLs and the SERVER_NAME and SERVER_PORT variables. # When set "Off", Apache will use the Hostname and Port supplied # by the client. When set "On", Apache will use the value of the # ServerName directive. # APACHE_USE_CANONICAL_NAME="off" ## Type: list(Major,Minor,Minimal,ProductOnly,OS,Full) ## Default: "OS" ## ServiceReload: apache2 # # How much information the server response header field contains about the server. # (installed modules, versions, etc.) # see http://httpd.apache.org/docs-2.2/mod/core.html#servertokens # APACHE_SERVERTOKENS="OS" ## Type: list(on,off) ## Default: "off" ## ServiceReload: apache2 # # If mod_status is used, include extended information about the server, like # CPU usage, in the status report. It is a server-wide setting, and it can cost # some performance! # APACHE_EXTENDED_STATUS="off" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] laptop with core 2 duo shows only one core
by Bruce Ferrell 06 May '13

06 May '13

The hardware lister says I have two cores: lshw -C cpu *-cpu description: CPU product: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz vendor: Intel Corp. physical id: 400 bus info: cpu@0 slot: Microprocessor size: 2600MHz capacity: 2600MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dtherm tpr_shadow vnmi flexpriority configuration: cores=2 enabledcores=2 threads=2 inxi shows me I'm running in uniprocessor mode: inxi -c 0 -F System: Host: <hostname> Kernel: 3.8.9-5-desktop x86_64 (64 bit) Console tty 1 Distro: openSUSE 12.3 (x86_64) VERSION = 12.3 CODENAME = Dartmouth Machine: System: Dell (portable) product: MXG071 serial: XXXXXXXXX Mobo: Dell model: 0KX412 serial: .YYYYYYYYYY. Bios: Dell version: A11 date: 04/23/2010 CPU: Single core Intel Core2 Duo CPU T9500 (-UP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) clocked at 2592.643 MHz Graphics: Card: NVIDIA G84 [GeForce 8700M GT] X.org: 1.13.2 driver: nvidia tty size: 190x54 Advanced Data: N/A for root out of X Audio: Card: Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.8.9-5-desktop Network: Card-1: Broadcom NetXtreme BCM5754M Gigabit Ethernet PCI Express driver: tg3 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:23:ae:2d:3e:ff Card-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network Connection driver: iwl4965 IF: wlan0 state: down mac: 00:21:5c:59:b1:bf Drives: HDD Total Size: 1320.3GB (36.4% used) 1: /dev/sdb WDC_WD10JPVT 1000.2GB 2: /dev/sda ST9320421ASG 320.1GB Partition: ID: / size: 60G used: 32G (54%) fs: ext3 ID: /home size: 226G used: 167G (78%) fs: ext3 ID: swap-1 size: 8.59GB used: 0.00GB (0%) fs: swap Sensors: System Temperatures: cpu: 62.5C mobo: N/A Fan Speeds (in rpm): cpu: N/A Info: Processes: 197 Uptime: 1:12 Memory: 1535.6/7985.0MB Runlevel: 5 Client: Shell inxi: 1.7.24 my grub boot options are: noapic nolapic apm=off noresume edd=off nohz=off hires=off processor.max_cstate=1 nomodeset resume=/dev/disk/by-id/ata-ST9320421ASG_5TJ0Q4HY-part2 splash=silent quiet showopts Can anyone tell me what I need to change to get my system to boot smp again? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 23

[opensuse-factory] Tumbleweed and KDE on the horizon?
by Roman Bysh 05 May '13

05 May '13

Hello List mates, Since GNOME was added to Tumbleweed. Can we expect to see KDE this month? Cheers! Roman ------------------------------------------------------- openSUSE -- Get it! Discover it! Share it! ------------------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] unmasking (initial) password creation during installation (only)
by Felix Miata 04 May '13

04 May '13

About unmasking password entry on the initial sign-up form, very interesting: https://bugzilla.redhat.com/show_bug.cgi?id=958608 Fedora devel mailing list has a long thread. I was aghast initially, but after reading http://uxmovement.com/forms/why-password-masking-can-hurt-your-sign-up-form/ I'm inclined to think good idea here as well as there. WDYT for 13.1? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Documentation changes on page and help needed on what do I need in my index.html to use a lamp stack for cacti ?
by doiggl＠velocitynet.com.au 02 May '13

02 May '13

Hello, What do I need in my index.html to use a lamp stack for cacti ? - I have no index.html in /srv/www/htdocs/ - Im trying to get cacti http://en.opensuse.org/Cacti to install/run on localhost[127.0.0.1] 1. Also can someone help/assist update the documentation details on this Cacti documentation web page http://en.opensuse.org/Cacti Some changes have been identified, see [6]for details on old/new lines. I am using this as a guide, but it looks like it is out of date by a version. 2. I am stuck on the configation part , can someone assist ? I've included a for list of Documentation changes, see[6] below. Thanks Glenn 127.0.0.1 I get following error: Access forbidden! You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster. Error 403 1. Using Cacti from http://download.opensuse.org/repositories/server:/monitoring/openSUSE_Facto… 2. Document root and file listing: # ls /srv/www/htdocs/ gif info2html.css 3. configuration files # ll /etc/apache2/vhosts.d/cacti.conf /srv/www/cacti/config.php -rw-r--r-- 1 root root 529 May 2 21:29 /etc/apache2/vhosts.d/cacti.conf -rw-r--r-- 1 wwwrun www 2114 May 2 21:31 /srv/www/cacti/config.php # cat /etc/apache2/vhosts.d/cacti.conf <VirtualHost *:80> ServerAdmin root@localhost ServerName localhost DocumentRoot /srv/www/cacti/ ErrorLog /var/log/apache2/cacti-error_log CustomLog /var/log/apache2/cacti-access_log combined HostnameLookups Off UseCanonicalName Off ServerSignature On <IfModule mod_userdir.c> UserDir public_html Include /etc/apache2/mod_userdir.conf </IfModule> <Directory "/usr/share/cacti"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> </VirtualHost> # cat /srv/www/cacti/config.php <?php /* +-------------------------------------------------------------------------+ | Copyright (C) 2004-2011 The Cacti Group | | | | This program is free software; you can redistribute it and/or | | modify it under the terms of the GNU General Public License | | as published by the Free Software Foundation; either version 2 | | of the License, or (at your option) any later version. | | | | This program is distributed in the hope that it will be useful, | | but WITHOUT ANY WARRANTY; without even the implied warranty of | | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | | GNU General Public License for more details. | +-------------------------------------------------------------------------+ | Cacti: The Complete RRDTool-based Graphing Solution | +-------------------------------------------------------------------------+ | This code is designed, written, and maintained by the Cacti Group. See | | about.php and/or the AUTHORS file for specific developer information. | +-------------------------------------------------------------------------+ | http://www.cacti.net/ | +-------------------------------------------------------------------------+ */ /* make sure these values refect your actual database/host/user/password */ $database_type = "mysql"; $database_default = "cactidb"; $database_hostname = "localhost"; $database_username = "cacti"; $database_password = "cacti"; $database_port = "3306"; $database_ssl = false; /* Edit this to point to the default URL of your Cacti install ex: if your cacti install as at http://serverip/cacti/ this would be set to /cacti/ */ $url_path = "/"; /* Default session name - Session name must contain alpha characters */ $cacti_session_name = "Cacti"; ?> 5. cacti installed on /srv/www/cacti/ # ls /srv/www/cacti/ about.php color.php graph_image.php graphs.php index.php poller_commands.php settings.php auth_changepassword.php data_input.php graph_settings.php graphs_items.php install poller_export.php templates_export.php auth_login.php data_queries.php graph_templates.php graphs_new.php lib resource templates_import.php cacti.sql data_sources.php graph_templates_inputs.php host.php logout.php rra tree.php cdef.php data_templates.php graph_templates_items.php host_templates.php plugins rra.php user_admin.php cli gprint_presets.php graph_view.php images plugins.php script_server.php utilities.php cmd.php graph.php graph_xport.php include poller.php scripts [6] List of Documentation changes identified. ############################################ source http://en.opensuse.org/Cacti old lines in documentation identified: ===================================== zypper ar http://download.opensuse.org/repositories/server:/monitoring/openSUSE_11.4/ server:monitoring zypper in mysql-community-server mysql-community-server-client zypper in cacti-PA cacti-PA-boost cacti-PA-clog cacti-PA-cycle cacti-PA-discovery cacti-PA-docs cacti-PA cacti-PA-flowview cacti-PA-hostinfo cacti-PA-loginmod cacti-PA-mactrack cacti-PA-monitor cacti-PA-npc cacti-PA-ntop cacti-PA-realtime cacti-PA-routerconfigs cacti-PA-settings cacti-PA-ssl cacti-PA-syslog cacti-PA-thold cacti-PA-tools cacti-PA-update new lines in documentation identified: ===================================== zypper ar http://download.opensuse.org/repositories/server:/monitoring/openSUSE_12.3/ server:monitoring zypper in mariadb zypper in cacti cacti-plugin-autom8 cacti-plugin-boost cacti-PA-clog cacti-plugin-cycle cacti-plugin-discovery cacti-plugin-docs cacti-plugin-flowview cacti-plugin-hostinfo cacti-plugin-loginmod cacti-plugin-mactrack cacti-plugin-monitor cacti-plugin-npc cacti-plugin-ntop cacti-plugin-realtime cacti-plugin-routerconfigs cacti-plugin-settings cacti-plugin-ssl cacti-plugin-syslog cacti-plugin-thold cacti-plugin-tools cacti-plugin-update Replace text in documentation: ============================= /usr/share/cacti/ to /srv/www/cacti/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] zypper dup new desktop kernel : something with Virtual Box maybe
by ellanios82 02 May '13

02 May '13

Hello List " Computing distribution upgrade... The following NEW package is going to be installed: kernel-desktop 1 new package to install. Overall download size: 39.3 MiB. After the operation, additional 117.6 MiB will be used. Continue? [y/n/?] (y): y (1/1) Installing: kernel-desktop-3.8.9-5.1 ................................<100%>[\] " - at this point zypper freezes : gets stuck, and does not install the new kernel in grub boot menu ......................... post script : _________ i see maybe a clue : upon killing zypper, there is a message : " Interrupted, cleaning up. warning: %post(kernel-desktop-3.8.9-5.1.i686) scriptlet failed, signal 2 " ................ p.p.s. _____ - looks like something to do with having a VirtualBox kernel on the grub menu : . . . find more messages : " Installation of kernel-desktop-3.8.9-5.1 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: WARNING: Can't read module /lib/modules/3.8.9-5-desktop/weak-updates/updates/vboxdrv.ko: No such file or directory " ...................... thanks best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3