May 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] can apache HTTP Server be updated to version 2.4.4 [from v-2.4.3]
by doiggl＠velocitynet.com.au 30 May '13

30 May '13

Hello, Can apache HTTP Server be updated to version 2.4.4 [from v-2.4.3] https://build.opensuse.org/package/show?package=apache2&project=openSUSE%3A… http://httpd.apache.org/download.cgi Stable Release - Latest Version: 2.4.4 (released 2013-02-25) http://httpd.apache.org/download.cgi#apache24 -- Thanks Glenn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] help wanted: How can I get an apache2 install working. on 127.0.0.1
by doiggl＠velocitynet.com.au 29 May '13

29 May '13

Hello, How can I get an apache install working. I get the error on 127.0.0.1 I have been following instructions from http://en.opensuse.org/SDB:Apache_installation Here is what I have done: # zypper in apache2 Loading repository data... Reading installed packages... 'apache2' is already installed. No update candidate for 'apache2-2.4.3-1.1.x86_64'. The highest available version is already installed. sysconf_addword /etc/sysconfig/SuSEfirewall2 FW_CONFIGURATIONS_EXT apache2 "apache2" already present sysconf_addword /etc/sysconfig/SuSEfirewall2 FW_CONFIGURATIONS_EXT apache2-ssl "apache2-ssl" already present rcapache2 start redirecting to systemctl start apache2 #firewall rcSuSEfirewall2 restart chkconfig -a apache2 Note: This output shows SysV services only and does not include native systemd services. SysV configuration data might be overridden by native systemd configuration. # cat /srv/www/htdocs/index.html <html><body><h1>It works!</h1></body></html> #status and log shows: /bin/systemctl status apache2.service apache2.service - The Apache Webserver Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled) Active: failed (Result: exit-code) since Wed, 2013-05-29 20:08:59 EST; 37s ago Process: 9030 ExecStop=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k graceful-stop (code=exited, status=1/FAILURE) Process: 9001 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -DNO_DETACH -k start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/apache2.service May 29 20:08:59 test.site start_apache2[9001]: Module "authz_default" is not installed, ignoring. May 29 20:08:59 test.site start_apache2[9001]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. May 29 20:08:59 test.site start_apache2[9001]: AH00526: Syntax error on line 1 of /etc/apache2/uid.conf: May 29 20:08:59 test.site start_apache2[9001]: Invalid command 'User', perhaps misspelled or defined by a module not included in the server configuration May 29 20:08:59 test.site systemd[1]: apache2.service: main process exited, code=exited, status=1/FAILURE May 29 20:08:59 test.site start_apache2[9030]: Module "authz_default" is not installed, ignoring. May 29 20:08:59 test.site start_apache2[9030]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. May 29 20:08:59 test.site start_apache2[9030]: AH00526: Syntax error on line 1 of /etc/apache2/uid.conf: May 29 20:08:59 test.site start_apache2[9030]: Invalid command 'User', perhaps misspelled or defined by a module not included in the server configuration May 29 20:08:59 test.site systemd[1]: Unit apache2.service entered failed state cat /etc/apache2/uid.conf User wwwrun Group www rpm -qa| grep -i apache2 | sort apache2-2.4.3-1.1.x86_64 apache2-devel-2.4.3-1.1.x86_64 apache2-doc-2.4.3-1.1.noarch apache2-event-2.4.3-1.1.x86_64 apache2-example-pages-2.4.3-1.1.x86_64 apache2-mod_perl-2.0.7+svn1448242-1.1.x86_64 apache2-mod_php5-5.4.14-1.1.x86_64 apache2-prefork-2.4.3-1.1.x86_64 apache2-utils-2.4.3-1.1.x86_64 apache2-worker-2.4.3-1.1.x86_64 perl-Apache2-AuthCookieDBI-2.14-6.1.noarch rubygem-passenger-apache2-3.0.19-1.2.x86_64 # cat /srv/www/htdocs/index.html <html><body><h1>It works!</h1></body></html> Question: How can this error be fixed what commands do I run ? Thanks Glenn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] Tumbleweed Kernel since 3.9.1 crypttab trouble
by ub22 27 May '13

27 May '13

I've updated the Kernel via Tumbleweed. Since the last two Kernel Versions 3.9.1 and 3.9.2 the booting fails with my Cryptodevice settings: Installed Kernels: /boot/vmlinuz-3.9.0-6-desktop: Linux/x86 Kernel, Setup Version 0x20c, bzImage, Version 3.9.0, Version 3.9.0-6, RO-rootFS, swap_dev 0x4, Normal VGA works fine /boot/vmlinuz-3.9.1-7.gb6484b6-desktop: Linux/x86 Kernel, Setup Version 0x20c, bzImage, Version 3.9.1, RO-rootFS, swap_dev 0x4, Normal VGA hangs at Code: systemd[1]: Breaking ordering cycle by deleting job systemd-cryptsetup(a)cr_temp.crypt.service/start as endless loop. /boot/vmlinuz-3.9.2-8.g04040b9-desktop: Linux/x86 Kernel, Setup Version 0x20c, bzImage, Version 3.9.2, RO-rootFS, swap_dev 0x4, Normal VGA the same as Kernel 3.9.1 cat /etc/fstab /dev/disk/by-id/ata-xxx-part1 swap swap defaults 0 0 /dev/disk/by-id/ata-yyy-part1 / ext4 acl,user_xattr 1 1 /dev/disk/by-id/ata-xxx-part3 /tmp ext4 defaults 1 1 /dev/disk/by-id/ata-xxx-part2 /mnt/boot ext4 defaults 1 2 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 /dev/mapper/cr_temp.crypt /home/usr/temp ext4 loop,noauto,acl,user_xattr,nofail 0 2 192.168.1.1:/home /home nfs4 defaults 0 0 192.168.1.1:/sik /mnt/sik nfs4 defaults 0 0 #.... cat /etc/crypttab #cr_temp.crypt /mnt/sik/temp/temp.crypt none timeout=0 #original entry but same result as next line cr_temp.crypt /mnt/sik/temp/temp.crypt none nofail,timeout=0 With this entries (both) the new Kernels have the effect. (I uses "nofail" instead of "noauto" like described in the "man" pages. cat /etc/crypttab cr_temp.crypt /mnt/sik/temp/temp.crypt none noauto,timeout=0 This is working but I can't mount the crypto device. I found in the net, that I should start the service "systemctl start secret.mount" or "systemctl restart secret.mount" Normally I mount after booting via "systemd-tty-ask-password-agent" command, the crypto file system, if it is working. Have anyone an idea, what can be my mistake or is this relay a bug? Ulf PS: I've also posted this on openSUSE Forum: https://forums.opensuse.org/english/get-technical-help-here/tumbleweed/4870… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] Everybody be cool, this is a milestone!
by Stephan Kulow 27 May '13

27 May '13

Hi, It's about time we start releasing milestones again, so I would like to finish one this week (being on vaction next and last week :) Factory doesn't look *that* good, but not that bad either, so I would like to release what we have after fixing some evil bugs (like missing X drivers on installation media). Just to let you know why I'm only looking at specific packages and leave your package uncommited. The roadmap would look like this: 16.5 - M1 13.6 - M2 11.7 - M3 8.8 - M4 19.9 - B1 10.10 - RC1 31.10 - RC2 8.11 - GMC Greetings, Stephan P.S. 13.1's codename is Bottle (green) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 9

[opensuse-factory] glibc-locale issue in Haskell packages
by Peter Trommler 24 May '13

24 May '13

Hi, I have been seeing the following in Factory builds of all Haskell libraries on OBS recently: [ 46s] ghc-base-devel-4.6.0.1-6.6 ######################################## [ 1006s] ghc-pkg: out of memory (requested 1048576 bytes) See: https://build.opensuse.org/package/rawlog?arch=x86_64&package=hscolour&proj… ghc-pkg is run in the %post section of all ghc-*-devel packages. Reading through the logs of other Haskell packages on OBS I think ghc-pkg allocates all available memory and is then killed only when glibc-locale is not installed. openSUSE 12.1, 12.2, and 12.3 all preinstall glibc-locale and there I have not seen any problems with ghc-pkg. After adding a Requires to the package providing ghc-pkg (ghc-compiler) Haskell packages build normally now (see devel:languages:haskell). I am not sure this is the right way to fix this issue though. I have not been able to reproduce the issue building on my local machine running openSUSE 12.2 and I have not heard anyone on the Haskell mailing lists complain about ghc-pkg. Could this be a glibc issue? Thanks, Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] milestone 1 - was the default sysrq setting changed intentionally?
by Per Jessen 24 May '13

24 May '13

When I tried Sysrq-B on a fresh M1 install, I was informed that the sysrq function is disabled. -- Per Jessen, Zürich (14.1°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 14

[opensuse-factory] libpng16 will not read some (broken) png images
by pgajdos＠suse.cz 24 May '13

24 May '13

Hi List, JFYI, libpng 1.6.2, which is currently in factory can introduce fails when reading png, namely 'IDAT: invalid distance too far back'. See e. g. multimedia:apps/lilypond build for factory. Very probably, these images will not read anymore with newer libpngs. For multimedia:apps/lilypond example, there are 195 png images, only three fails to read. It is possible to use optipng to fix them or wait for 1.6.3, which will ship png-fix-too-far-back tool (see graphics/libpng17). I am going to create corresponding rpm macro to find and fix these PNGs in a package, where it is called. Again, these PNGs are said to be broken; they should be fixed upstream. If I've understood correctly, not supporting them should help libpng to be more memory-efficient. Further reading & links: https://git.reviewboard.kde.org/r/110314/ Thanks, Petr

2 4

[opensuse-factory] Still a problem -- libwrap doesn't work properly on ipv4-only kernel
by Linda Walsh 24 May '13

24 May '13

I reported this a while back and people thought it might be the dns server's issue, but looking at the code the problem is that the patched version of tcpd.c that enables it to work for ipv6, DISABLES it working for ipv4. Does anyone know who is responsible for the tcp_wrappers/libwrap/tcpd package? I had to turn off full checking in tcpd and set it for 'warn only', (if it checked instead of warn'ed it would lock me out). The warning / problem message look like: May 23 15:34:56 Ishtar sshd[39364]: warning: /etc/hosts.allow, line 63: host name mismatch: Athenae != (null) (::ffff:192.168.4.12) Athenae didn't have an ipv6 addr because the server has no ipv6 interfaces. tcpd was setup to only query for dns on ipv6... Now can login with no warnings, but I don't have an ipv6 to immediately test this on. But the same binary should work now for both ipv4 and ipv6 enabled kernels. I check for presence of /proc/sys/net/ipv6 . If it exists, I use the ipv6 code path else use the ipv4 code path. I did verify if I manually set the flag to ipv6 mode, I got the warning again as before, but in the mode where it tests for the proc dir existence, I don't. Attached is a diff against lastest factory source that should fix the problem If the maintainer could look it over and give it a run on an ipv6 enabled machine, and either include in suse's product, or better, feed it back upstream (it was looking at the source changes upstream that gave me the idea that they'd done a quick ipv6 job) that's be great..? It was a quick job, but I think I have confidence enough in it to submit it here. Can it be integrated if it is ok? It fixes a long outstanding problem in the tcpd code...

2 3

[opensuse-factory] Custom kernel and nvidia
by Daniele 23 May '13

23 May '13

Hi guys, I've just recompiled my own kernel (from kernel-source package) so far so good.. How to deal with nvidia drivers ? Is there a way to trigger the rebuild of modules ? What happens if I reinstall nvidia packages ? Can I build modules for differents kernel (same version) from nvidia packages ? Do I need DKMS ? I know that this is not a support list but if the answer is switch to dkms and/or install nvidia driver from nvidia site, something could be done for the next release... Daniele. -- *** Linux user # 198661 ---_ ICQ 33500725 *** *** Home http://www.kailed.net *** *** Powered by openSUSE *** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

Re: [opensuse-factory] Custom kernel and nvidia
by Daniele 23 May '13

23 May '13

In data martedì 21 maggio 2013 19:48:11, James D. McDaniel ha scritto: > On 05/19/2013 05:10 AM, Daniele wrote: > > Hi guys, I've just recompiled my own kernel (from kernel-source > > package) so far so good.. > > How to deal with nvidia drivers ? Is there a way to trigger the > > rebuild of modules ? > > > > What happens if I reinstall nvidia packages ? > > Can I build modules for differents kernel (same version) from nvidia > > packages ? > > > > Do I need DKMS ? > > > > I know that this is not a support list but if the answer is switch > > to > > dkms and/or install nvidia driver from nvidia site, something could > > be done for the next release... > > > > Daniele. > > You can compile your kernel with this as well: S.A.K.C. - SUSE Thank you, I 'm aware about SAKC, DKMS etc, etc.. but at this point is easiest to install nvidia driver from Nvidia and rebuild the module when needed. We have the source already in place so we only miss a (easy) way to rebuild the module... This: https://build.opensuse.org/package/view_file?expand=1&file=kmp-post.sh&pack… (and maybe some more code) should be a separate script and not inside the spec file. So it would be re-callable after installation... Just for the record, my main desktop still on 12.2 (I miss liveCD..) so kernel 3.4.* Daniele. -- *** Linux user # 198661 ---_ ICQ 33500725 *** *** Home http://www.kailed.net *** *** Powered by openSUSE *** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3