October 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] No usable network caused by failing avahi-autoipd
by Jogchum Reitsma 12 Oct '13

12 Oct '13

Recently I filed bug 844146against 13.1B1. I had the impression that it was caused by mkinitrd not doing a proper job, but from the output of the command below it was concluded that it is avahi-autoipd causing the trouble. I changed the title of the report to refelct this. In the output below I changed three times the "@"-symbol to " at " between "network" and "eth0.service" because otherwise the mlmmj program managing the mailinglist will not let the message pass. ======================================== systemctl --full status network.service network at eth0.service network.service - LSB: Configure network interfaces and set up routing Loaded: loaded (/usr/lib/systemd/system/network.service; enabled) Active: active (exited) since Sat 2013-10-12 08:31:41 CEST; 1h 26min ago Process: 827 ExecStart=/etc/init.d/network start (code=exited, status=0/SUCCESS) Oct 12 08:31:35 souder systemd[1]: Starting LSB: Configure network interfaces and set up routing... Oct 12 08:31:36 souder network[827]: Setting up network interfaces: Oct 12 08:31:36 souder network[827]: lo Oct 12 08:31:36 souder network[827]: lo IP address: 127.0.0.1/8 Oct 12 08:31:41 souder network[827]: ..done..done eth1 Startmode is 'manual' -> skipping Oct 12 08:31:41 souder network[827]: ..skippedSetting up service network . . . . . . . . . . . . ...done Oct 12 08:31:41 souder systemd[1]: Started LSB: Configure network interfaces and set up routing. network at eth0.service - ifup managed network interface eth0 Loaded: loaded (/usr/lib/systemd/system/network@.service; static) Active: active (exited) (Result: exit-code) since Sat 2013-10-12 08:31:41 CEST; 1h 26min ago Process: 1231 ExecStart=/sbin/ifup %i (code=exited, status=0/SUCCESS) Main PID: 1382 (code=exited, status=1/FAILURE) Oct 12 08:31:40 souder avahi-autoipd(eth0)[1382]: Found user 'avahi-autoipd' (UID 489) and group 'avahi-autoipd' (GID 487). Oct 12 08:31:40 souder avahi-autoipd(eth0)[1382]: Successfully called chroot(). Oct 12 08:31:40 souder avahi-autoipd(eth0)[1382]: Successfully dropped root privileges. Oct 12 08:31:40 souder avahi-autoipd(eth0)[1382]: Starting with address 169.254.5.133 Oct 12 08:31:40 souder avahi-autoipd(eth0)[1382]: Routable address already assigned, sleeping. Oct 12 08:31:41 souder systemd[1]: Started ifup managed network interface eth0. Oct 12 08:32:22 souder avahi-autoipd(eth0)[1382]: No longer a routable address configured, restarting probe process. Oct 12 08:32:27 souder avahi-autoipd(eth0)[1382]: A routable address has been configured. Oct 12 08:33:02 souder avahi-autoipd(eth0)[1382]: No longer a routable address configured, restarting probe process. Oct 12 08:33:02 souder systemd[1]: network at eth0.service: main process exited, code=exited, status=1/FAILURE =============================================== Is it helpful to keep 13.1B1 on my system to look further into this, or shall I install RC1? Jogchum -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] 13.1.rc1 YAST NFS client configuration makes system unbootable.
by Steven Hess 12 Oct '13

12 Oct '13

Using Yast NFS client configuration hangs at 50%. No way to exit but reboot. Renders the system unbootable. Apparently the NFS shares are trying to mount before the host can be located. Adding the NFS server to Hosts makes the system bootable and shares are mounted normally. This is the best I can explain it. How do I add this bug so it will get squashed? Thanks Steven -- ____________ Apply appropriate technology. Use what works without prejudice. Steven L Hess ARS KC6KGE DM05gd22 openSUSE Linux 12.3 KDE Known as FlameBait and The Sock Puppet of Doom. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] [13.1 Beta1, NVIDIA] Driver install issues
by 0x90 12 Oct '13

12 Oct '13

Hello, I'd like to know if anybody already figured out how to install nvidia-driver. - installed Beta1 fresh from USB-Stick (openSUSE-Factory-NET-Build0725-x86_64.iso) with Parameter "nomodeset" - zypper patch and up - zypper rm libgcc (dependency issues with devel_* patterns) - installed devel_* patterns - init 3 - trying "NVIDIA-Linux-x86_64-319.49.run" results to (error part of logfile): In file included from /tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel/os-interface.c:26:0: /tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel/os-interface.c: In function ‘os_get_system_memory_size’: /tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel/nv-linux.h:1040:41: error: ‘num_physpages’ undeclared (first use in this function) #define NV_NUM_PHYSPAGES num_physpages ^ /tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel/os-interface.c:255:21: note: in expansion of macro ‘NV_NUM_PHYSPAGES’ return (((NvU64)NV_NUM_PHYSPAGES * PAGE_SIZE) / RM_PAGE_SIZE); ^ /tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel/nv-linux.h:1040:41: note: each undeclared identifier is reported only once for each function it appears in #define NV_NUM_PHYSPAGES num_physpages ^ /tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel/os-interface.c:255:21: note: in expansion of macro ‘NV_NUM_PHYSPAGES’ return (((NvU64)NV_NUM_PHYSPAGES * PAGE_SIZE) / RM_PAGE_SIZE); ^ /tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel/os-interface.c:256:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ make[4]: *** [/tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel/os-interface.o] Error 1 make[3]: *** [_module_/tmp/selfgz20396/NVIDIA-Linux-x86_64-319.49/kernel] Error 2 make[2]: *** [sub-make] Error 2 NVIDIA: left KBUILD. nvidia.ko failed to build! make[1]: *** [module] Error 1 make: *** [module] Error 2 - trying "NVIDIA-Linux-x86_64-325.08.run" results to: /tmp/selfgz22370/NVIDIA-Linux-x86_64-325.08/kernel/nv-i2c.c: In function ‘nv_i2c_del_adapter’: /tmp/selfgz22370/NVIDIA-Linux-x86_64-325.08/kernel/nv-i2c.c:252:14: error: void value not ignored as it ought to be osstatus = i2c_del_adapter(pI2cAdapter); ^ make[3]: *** [/tmp/selfgz22370/NVIDIA-Linux-x86_64-325.08/kernel/nv-i2c.o] Error 1 make[2]: *** [_module_/tmp/selfgz22370/NVIDIA-Linux-x86_64-325.08/kernel] Error 2 make[1]: *** [sub-make] Error 2 make[1]: Leaving directory `/usr/src/linux-3.11.1-1.g1383321' NVIDIA: left KBUILD. nvidia.ko failed to build! make: *** [module] Error 1 Sincerely yours, 0x90 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 20

[opensuse-factory] 13.1 Beta 1 Questions.
by Upscope 11 Oct '13

11 Oct '13

installed 13.1 Beta 1 (from DVD) earlier this week, on my other disk. I then added the oss and nonoss repo's Code --------- http://download.opensuse.org/distribution/13.1/repo/oss/ http://download.opensuse.org/distribution/13.1/repo/non-oss/ --------- and did an update. Took forever. 1). Why did it update approximately 1700 package for Tex Live (looks like they were installed from the DVD for Beta 1 [clean install]? Are they all necessary or can I delete some or all of them? If only some what is the best way to get minimum number required? 2). Are the 13.1 update repo's out of sync. They appear to have older versions of a lot of the files? 3) I read 13.1 rc1 is available. Is it in a different repo than I used above or is the Distribution repo just not updated? Over all the install when great and the display looks good at 1920x1080 after I got the patched version of the Nvidia 325-15 driver installed. YaST updates appear faster once you get them selected. Hardware and software are the same as listed below except for the OS version and the Disk drive it is installed on. -- openSUSE 12.3(Linux 3.11.1-3.gfeffbf9-desktop)|KDE 4.11.2 |Intel core2duo 2.5 MHZ,|8GB DDR3|GeForce 8400GS (NVIDIA-Linux-x86_64-325.15 Patched) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] openSUSE 13.1 RC1 released
by Tomáš Chvátal 11 Oct '13

11 Oct '13

Hello guys, With one day skew against the plan for mirror sync we at openSUSE team happily announce the release [1][2]. Apart from this lovely announcement from Jos we should start focusing a lot on the stability as I said in yesterdays mail. [3] Basically try to fill up factory with 13.1 fixes so it is more reliable and smoth to show up everone how great distro is done. While testing also focus on bugzilla skills and try to report as much things as possible there without using mailinglists or irc. We need to properly track and mitigate the issues to decide what really needs to go first and what next. With issues reported just here or IRC it is more work for me or coolo to remember those and try to figure out solutions. Good luck with testing and have fun Tom [1] https://news.opensuse.org/2013/10/11/opensuse-13-1-rc-1-available-time-to-t… [2] http://download.opensuse.org/distribution/13.1-RC1/iso/ [3] http://lists.opensuse.org/opensuse-factory/2013-10/msg00163.html

5 7

[opensuse-factory] openSUSE 13.1 RC1 is out, help test!
by Jos Poortvliet 11 Oct '13

11 Oct '13

Hi all, RC 1 is ready to go, get it from its usual place: http://software.opensuse.org/developer Here's the announcement: https://news.opensuse.org/?p=16780 The Beta Hackaton last month did fix lots of issues and the btrfs testing has been very helpful as well but there might be more of those nasty critters in there so see how it works for you and report issues! See our most annoying bugs here: http://en.opensuse.org/openSUSE:Most_annoying_bugs_13.1_dev Consider helping to promote this release as well: https://news.opensuse.org/2013/10/07/help-promote-opensuse-13-1/ Have a lot of fun, The Release Geekos -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] what about ModemManager
by Ruediger Meier 11 Oct '13

11 Oct '13

Hi, After upgrade to 13.1 I noticed the ModemManager process. It is one of the first things which is started after boot. I have static network setup and pppd is running a DSL modem connected via network. $ mmcli -L No modems were found What is ModemManager good for and why it's installed and running by default? cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 9

[opensuse-factory] system boot hangs more than 100s
by Ruediger Meier 11 Oct '13

11 Oct '13

Hi, Recent factory snapshot hangs when kernel boots for more than 100 seconds. See the logs here at "2013-10-10T04:43:53.911362" http://pastebin.com/pA9fELnV How to debug this? cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] Why is btrfs added to initrd
by Ruediger Meier 11 Oct '13

11 Oct '13

Hi, I'm using recent factory snapshot and wonder why btrf is always loaded by initrd allthough I don't use it and it's not set in /etc/sysconfig? cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 12

[opensuse-factory] [Tumbleweed] Missing some kernel updates
by Vahis 10 Oct '13

10 Oct '13

Kernel-desktop & kernel-desktop-devel are in version 3.11.2-30.3. I've been waiting for kernel-source and kernel-devel versions to appear as the same, but apparently they're stuck? Vahis -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1