October 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] dracut problem
by Sid Boyce 15 Oct '13

15 Oct '13

System drops into a dracut shell, no devices found. "ls -l /dev/disk" is not there. With the previous 3.12.0-rc4 vanilla kernel installed one week ago, lsinitrd shows a large number of modules. sabre:~ # dracut --force --kver 3.12.0-rc5-smp+ Executing: /usr/bin/dracut --force --kver 3.12.0-rc5-smp+ dracut module 'cifs' depends on 'network', which can't be installed dracut module 'network' cannot be found or installed. dracut module 'network' cannot be found or installed. dracut module 'network' cannot be found or installed. dracut module 'network' cannot be found or installed. *** Including module: bash *** *** Including module: i18n *** *** Including module: drm *** *** Including module: plymouth *** *** Including module: btrfs *** *** Including module: crypt *** *** Including module: dm *** Skipping udev rule: 64-device-mapper.rules Skipping udev rule: 60-persistent-storage-dm.rules Skipping udev rule: 55-dm.rules *** Including module: dmraid *** Skipping udev rule: 64-md-raid.rules *** Including module: kernel-modules *** *** Including module: lvm *** Skipping udev rule: 64-device-mapper.rules Skipping udev rule: 56-lvm.rules Skipping udev rule: 60-persistent-storage-lvm.rules *** Including module: mdraid *** Skipping udev rule: 64-md-raid.rules *** Including module: multipath *** Skipping udev rule: 40-multipath.rules Skipping udev rule: 62-multipath.rules Skipping udev rule: 65-multipath.rules Skipping udev rule: 66-kpartx.rules *** Including module: resume *** *** Including module: rootfs-block *** *** Including module: terminfo *** *** Including module: udev-rules *** Skipping udev rule: 91-permissions.rules *** Including module: systemd *** *** Including module: base *** *** Including module: fs-lib *** *** Including module: shutdown *** *** Including module: suse *** *** Including modules done *** *** Installing kernel module dependencies and firmware *** *** Installing kernel module dependencies and firmware done *** *** Resolving executable dependencies *** *** Resolving executable dependencies done*** *** Hardlinking files *** *** Hardlinking files done *** *** Stripping files *** *** Stripping files done *** *** Generating early-microcode cpio image *** *** Constructing AuthenticAMD.bin **** *** Constructing GenuineIntel.bin **** *** Creating image file *** *** Creating image file done *** sabre:~ # lsinitrd /boot/initrd-3.12.0-rc5-smp+ Image: /boot/initrd-3.12.0-rc5-smp+: 19M ======================================================================== with dracut modules: ======================================================================== drwxr-xr-x 3 root root 0 Oct 15 04:09 . drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel/x86 drwxr-xr-x 2 root root 0 Oct 15 04:09 kernel/x86/microcode -rw-r--r-- 1 root root 18644 Oct 15 04:09 kernel/x86/microcode/AuthenticAMD.bin -rw-r--r-- 1 root root 494592 Oct 15 04:09 kernel/x86/microcode/GenuineIntel.bin ======================================================================== sabre:~ # rpm -qi dracut Name : dracut Version : 034 Release : 1.1 Architecture: x86_64 Install Date: Tue 15 Oct 2013 04:14:09 BST sabre:/boot # cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle # /etc/SuSE-release is deprecated and will be removed in the future, use /etc/os-release instead Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 5

[opensuse-factory] Problem with time display
by Thomas Taylor 15 Oct '13

15 Oct '13

openSUSE 13.1-RC1 (from DVD) KDE 4.11.12 On the lower right corner of the DE the time being displayed is UTC and I have been unsuccessful at trying to change either the actual time displayed or the time zone (mine is Los Angeles). When I right click on the time display and select "Adjust Date & Time", I am able to select the Los Angeles time zone. When I then supply the administrator password and click OK I get a message saying it's unable to reach the internet. NTP has been set up successfully using Yast2 and is apparently working. I am attaching a *.tar.bz2 file containing the ntp and message logs and a screenshot of the error message in hopes of getting a suggestion to solve this dilemma. Thanks, Tom -- Every man is encompassed by a cloud of comforting convictions, which move with him like flies on a summer day. - Bertrand Russell ^^ --... ...-- / -.- --. --... -.-. ..-. -.-. ^^^^ Tom Taylor - retired penguin - KG7CFC AMD Phenom II x4 955 -- 4GB RAM -- 2x1.5TB sata2 openSUSE 13.1_RC1-x86_64 KDE 4.11.12, FF 24.0, claws-mail 3.9.2 registered linux user 263467

3 5

[opensuse-factory] plasma-nm instead of NetworkManager-kde4?
by Robert Munteanu 15 Oct '13

15 Oct '13

Hi, I did a fresh install of 13.1 RC1 from http://software.opensuse.org/developer/en, using the DVD ISO. I've performed a zypper dup, which seemed to promptly replace NetworkManager-kde4 with plasma-nm. Is this intended? If it is, I assume there were some pretty good reasons, as I've already found two bugs: - https://bugzilla.novell.com/show_bug.cgi?id=845909 (VPN connection can not be started from plasma-nm-openconnect) - https://bugzilla.novell.com/show_bug.cgi?id=845783 (NetworkManager fails to save connection details for WAN connection with TLS) Robert -- http://robert.muntea.nu/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] Installation of ImageMagick-6.8.6.9-4.3 failed
by Olaf Hering 15 Oct '13

15 Oct '13

I'm doing zypper dup in a VM with btrfs, the dup fails like shown below. exception_8h.html is currently a file. Is this just an intermediate state between 12.3 and 13.1, or will a dist upgrade now likely fail? Olaf (1654/2159) Installing: ImageMagick-6.8.6.9-4.3 ...........................................................................[error] Installation of ImageMagick-6.8.6.9-4.3 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: error: unpacking of archive failed on file /usr/share/doc/packages/ImageMagick/www/api/MagickCore/exception_8h.html;524c4c73: cpio: link error: ImageMagick-6.8.6.9-4.3.x86_64: install failed error: ImageMagick-6.8.5.7-3.5.x86_64: erase skipped Abort, retry, ignore? [a/r/i] (a): r (1654/2159) Installing: ImageMagick-6.8.6.9-4.3 ...........................................................................[error] Installation of ImageMagick-6.8.6.9-4.3 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: error: unpacking of archive failed on file /usr/share/doc/packages/ImageMagick/www/api/MagickCore/exception_8h.html;524c4d21: cpio: link error: ImageMagick-6.8.6.9-4.3.x86_64: install failed error: ImageMagick-6.8.5.7-3.5.x86_64: erase skipped Abort, retry, ignore? [a/r/i] (a): -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 22

[opensuse-factory] beta 1 to rc1 question
by lynn 15 Oct '13

15 Oct '13

I just did a zypper dup on a 13.1 beta 1 and expected to see this: zypper dup locks up Bug #802525 But nothing. Only 6 packages were updates: zypper dup Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Retrieving repository 'openSUSE-13.1-1.2' metadata .......................[done] Building repository 'openSUSE-13.1-1.2' cache ............................[done] Retrieving repository 'openSUSE-13.1-Non-Oss' metadata ...................[done] Building repository 'openSUSE-13.1-Non-Oss' cache ........................[done] Retrieving repository 'openSUSE-13.1-Update' metadata ....................[done] Building repository 'openSUSE-13.1-Update' cache .........................[done] Loading repository data... Warning: Repository 'openSUSE-13.1-Update-Non-Oss' appears to outdated. Consider using a different mirror or server. Reading installed packages... Computing distribution upgrade... The following packages are going to be upgraded: accountsservice libaccountsservice0 libblkid1 libmount1 libuuid1 util-linux 6 packages to upgrade. Overall download size: 1.2 MiB. No additional space will be used or freed after the operation. Continue? [y/n/?] (y): And all was fine. Is that it? How do I know if I now have rc1? Thanks, L x -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 17

[opensuse-factory] should zypper dup inside a VMware appliance work yet?
by Greg Freemyer 15 Oct '13

15 Oct '13

I just tried to upgrade a VMware instance from 12.3 to 13.1 and I'm getting a complaint about a vmware client incompatibility. I only have 13.1 and 13.1 updates enabled as a repo. Thanks Greg -- Greg Freemyer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] 13.1 conflict
by Wolfgang Rosenauer 14 Oct '13

14 Oct '13

Hi, I'm getting this when I try to install gcc: ox:~ # zypper in gcc Loading repository data... Warning: Repository 'openSUSE-13.1-Update-Non-Oss' appears to outdated. Consider using a different mirror or server. Reading installed packages... Resolving package dependencies... Problem: gcc-4.8-2.1.2.x86_64 requires gcc48, but this requirement cannot be provided uninstallable providers: gcc48-4.8.1_20130909-3.2.1.i586[openSUSE-13.1-1.19] gcc48-4.8.1_20130909-3.2.1.x86_64[openSUSE-13.1-1.19] Solution 1: deinstallation of libgcc43-4.3.4_20091019-19.1.3.x86_64 Solution 2: do not install gcc-4.8-2.1.2.x86_64 Solution 3: do not install gcc-4.8-2.1.2.x86_64 Solution 4: break gcc-4.8-2.1.2.x86_64 by ignoring some of its dependencies zypper is configured for http://download.opensuse.org/distribution/13.1/repo/oss/ Wolfgang -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 13

[opensuse-factory] betapizzahackaton
by Jos Poortvliet 14 Oct '13

14 Oct '13

Heya, I'm working on an article on the bph ;-) If you participated, I'd love to get a quote, (screen)shot or in general hear your experiences, both good and bad*. Hugs, J *Can't promise to put the bad ones in the article but I'll make sure they are heard internally if needed.

1 0

[opensuse-factory] findutils,rpm: from Factory to Factory:Build?
by Bernhard Voelker 14 Oct '13

14 Oct '13

Hi *, after the upgrade of findutils to 4.5.12 in Factory [1] and the ugly hassle with it because the 'rpm' package needed a fix for an obsolete syntax [2] two weeks ago - sorry again, Coolo! - how will both packages now find their way into Factory:Build again? [1] https://build.opensuse.org/request/show/200576 [2] https://build.opensuse.org/request/show/200646 Have a nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] RC1: Loading Installation System (#/6) 100% always
by Felix Miata 13 Oct '13

13 Oct '13

Loading Installation System (#/6) 100% Each such line only ever says 100%, no actual progress percentage ever displays as it used to. HTTP init using Grub Legacy cmdline: showopts install=http://download.opensuse.org/factory-snapshot/repo/oss/ hostname=myhost hostip=192.168.1.2/24 gateway=192.168.1.1 nameserver=192.168.1.1 kexec_reboot=0 ipv6.disable=1 net.ifnames=0 noresume video=1152x864@85 vga=791 3 lang=en keytable=us namescheme=by-label -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3