July 2012 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] VMware Workstation 8 + Tumbleweed -> no Desktop
by Gino van den Bergen 24 Jul '12

24 Jul '12

I'm trying to install a rolling openSUSE under VMware workstation 8.0.4 . I did a fresh default desktop installation of openSUSE 12.1 with KDE. Updated to the latest patch level using Yast update, and switched to Tumbleweed following the discussion on http://en.opensuse.org/Portal:Tumbleweed After reboot, I am unable to open a desktop environment. The display drops back to KDM login screen after a login. I can login from terminal (Ctrl+Alt+F1). From /var/log/messages it appears that this is caused by "no mtrr found" (I have 3D acceleration off in VMware). Before I start digging into the hardware details of VMware I would like to know if you guys can help me out with this one. Note that for the 12.1 installation I used the prebuilt Open Virtual Machine Tools guest kernel module rather than build the kernel module from the VMware tools source. Thanks for your ideas. Gino -- Gino van den Bergen Dtecta - middleware solutions for real-time 4D collision detection T +31 (0)492 663259 | M +31 (0)6 38305878 info(a)dtecta.com | www.dtecta.com | Trade reg. 17135282 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] subscribe
by Gino van den Bergen 24 Jul '12

24 Jul '12

subscribe -- Gino van den Bergen Dtecta - middleware solutions for real-time 4D collision detection T +31 (0)492 663259 | M +31 (0)6 38305878 info(a)dtecta.com | www.dtecta.com | Trade reg. 17135282 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory]
by Gino van den Bergen 24 Jul '12

24 Jul '12

-- Gino van den Bergen Dtecta - middleware solutions for real-time 4D collision detection T +31 (0)492 663259 | M +31 (0)6 38305878 info(a)dtecta.com | www.dtecta.com | Trade reg. 17135282 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] texlive 2012 and pgf
by Alin Marin Elena 24 Jul '12

24 Jul '12

Hi, I have updated to texlive 2012... unfortunately... texlive-pgf seems to be too old. a simple document like this \documentclass{article} \usepackage{tikz} \begin{document} \end{document} fails with (/usr/share/texmf/tex/generic/pgf/math/pgfmath.code.tex (/usr/share/texmf/tex/generic/pgf/math/pgfmathcalc.code.tex (/usr/share/texmf/tex/generic/pgf/math/pgfmathutil.code.tex) (/usr/share/texmf/tex/generic/pgf/math/pgfmathparser.code.tex) (/usr/share/texmf/tex/generic/pgf/math/pgfmathfunctions.code.tex (/usr/share/texmf/tex/generic/pgf/math/pgfmathfunctions.basic.code.tex ! Package PGF Math Error: The function `add' already exists. See the PGF Math package documentation for explanation. searching the web they claim the problem was solved in the last cvs... http://sourceforge.net/mailarchive/forum.php?thread_name=F90783B3-F609-4D78… is there any chance to get it updated? Alin -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Will Amarok be fixed for 12.2 release
by Roman Bysh 23 Jul '12

23 Jul '12

Hello List Mates, I know this was covered in an earlier thread. However, I did see an answer. There was a year long bug that was patched and a subsequent update for mysql broke it again. Are we going to have Amarok in working condition for 12.2 release? -- Cheers! Roman --------------------------------------------------------------- openSUSE -- Get it! Discover it! Share it! --------------------------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Fwd: [opensuse-buildservice] JFYI: Factory/12.2 gcc has an endless loop
by Andreas Jaeger 23 Jul '12

23 Jul '12

FYI, this is relevant for factory... Andreas ---------- Forwarded Message ---------- Subject: [opensuse-buildservice] JFYI: Factory/12.2 gcc has an endless loop Date: Monday, July 23, 2012, 10:44:10 From: Adrian Schröter <adrian(a)suse.de> To: opensuse-buildservice(a)opensuse.org JFYI, our current compiler causes endless loops in many packages. This is why you see currently so many not ending builds on the cluster. A should-be-fixed version has been submitted, but has not yet finished to build. -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org ----------------------------------------- -- Andreas Jaeger aj(a){suse.com,opensuse.org} Twitter/Identica: jaegerandi SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn,Jennifer Guild,Felix Imendörffer,HRB16746 (AG Nürnberg) GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] gnome-keyring-pkcs11.so removed in last update?
by Linda Walsh 23 Jul '12

23 Jul '12

p11-kit: couldn't load module: /usr/lib64/pkcs11/gnome-keyring-pkcs11.so: /usr/lib64/pkcs11/gnome-keyring-pkcs11.so: cannot open shared object file: No such file or directory --- I noticed this in my boot log -- I didn't try to build the package, it just came this way! But: I have two copies of this package: gnome-keyring-3.2.1-2.3.1.x86_64.rpm gnome-keyring-3.2.1-2.6.1.x86_64.rpm The older package has the file, the newer one does not... Ishtar:/Share/suse/distribution/../suse/x86_64> rpm -qlp gnome-keyring-3.2.1-2.3.1.x86_64.rpm >/tmp/231 Ishtar:/Share/suse/distribution/../suse/x86_64> rpm -qpl gnome-keyring-3.2.1-2.6.1.x86_64.rpm >/tmp/261 Ishtar:/Share/suse/distribution/../suse/x86_64> diff /tmp/261 /tmp/231 11a12,13 > /usr/lib64/pkcs11 > /usr/lib64/pkcs11/gnome-keyring-pkcs11.so --- Is there a reason why this was removed ... ya gonna put it back? ;-) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Firefox in RC1 and Portuguese language
by Basil Chupin 21 Jul '12

21 Jul '12

Earlier today I installed 12.2 RC1 using the LIVE KDE CD Build #53. This contains Firefox v13.0.1 (and Firefox is the browser I have used for "time immemorial"). When I started for the first time this copy of Firefox, it came up with the message that there was an update to the Brazilian Portuguese Language pack. I do not use any other language other than UK English. And yet everytime I use the openSUSE version of Firefox - OR Thunderbird for that matter - I get this message that there is an upgrade to the Brazilian Portuguese language available! To make it worse, when I look in the Add-ons for Firefox - AND Thunderbird - I see that ALL other languages are listed in the Add-ons! (This is not something which has suddenly come up in RC1 - it's been going on since the beginning of 12.1 as I can recall.) Why is this so? BC -- Using openSUSE 12.2 x86_64 KDE 4.8.4 & kernel 3.4.4.2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 52

[opensuse-factory] Makeup mirror suppliers shared photos with you
by Makeup mirror suppliers 21 Jul '12

21 Jul '12

Dear: We have obtained your name and address from internet search,I know you sell fashion and promotion item,and we are writing to inquire whether you would be willing to establish business relations with us. We have been manufacturing promotion gift for many years now.our main products have makeup mirror,cosmetic brush,hair comb/brush,manicure sets, bottle opener,measuring tape etc.At present we are interested in extending our overseas market and would appreciate your respond. Considering our competitive prices and high quality,we expect to establish a long-term partnership With you. We look forward to your early reply. Thanks Best Regards! ------------------------------------ Ike Sale Manager Ningbo Yinzhou Victy Craft Factory

1 0

[opensuse-factory] 12.2 RC1 can't start nfs, rpc.statd
by lynn 21 Jul '12

21 Jul '12

Hi I can't start the nfs rpc stuff on 12.2. e.g. > mount -t nfs hh1:/home2/MARINA /mnt -osec=krb5,vers=3 > checkproc: Empty pid file /var/run/rpc.statd.pid for /usr/sbin/rpc.statd > Starting rpc.statd ... portmapper not running failed > mount.nfs: rpc.statd is not running but is required for remote locking. > mount.nfs: Either use '-o nolock' to keep locks local, or start statd. > mount.nfs: an incorrect mount option was specified Has something changed? I tried rcnfs start and rpc.statd but I can't get the rpc stuff to stick. Here is /etc/sysconfig/nfs: > USE_KERNEL_NFSD_NUMBER="4" > > MOUNTD_PORT="" > > NFS_SECURITY_GSS="yes" > > NFS3_SERVER_SUPPORT="yes" > > NFS4_SUPPORT="no" > > SM_NOTIFY_OPTIONS="" > > NFS_START_SERVICES="yes" > > STATD_OPTIONS="" > > NFSV4LEASETIME="" > > RPC_PIPEFS_DIR="" > > SVCGSSD_OPTIONS="" > > NFSD_OPTIONS="" Thanks, L x -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2