April 2010 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Cronie as default cron in Factory
by Michal Seben 07 Jun '11

07 Jun '11

Hi all! Next week I will move cronie[1] package to Factory, so it will replace old cron. If someone is against this step, please just write what's wrong. As I announced earlier, you could find Cronie in Base:System repo [2] there is also prepared wiki about known changes after switch to cronie [3] [1]https://fedorahosted.org/cronie/ [2]https://build.opensuse.org/package/show?package=cronie&project=Base%3ASys… [3]http://en.opensuse.org/Cron_replace#Differences_between_old_openSUSE.27s_… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 28

[opensuse-factory] syslog-ng update
by Peter Czanik 11 Dec '10

11 Dec '10

Hello, I prepared updated syslog-ng packages with the close supervision of Marius Tomaschewski, the maintainer of the syslog-ng package. They are available in home:czanik in the openSUSE BS. I would like to see these packages included in Factory, to replace the ancient 2.0 syslog-ng, but MT seems to have disappeared (no response to e-mails in the past two weeks). Questions: - it works fine on my machines, but could anybody else test it? - what is the proper way to get syslog-ng updated in factory, if the maintainer seems to be unavailable? - I have now both 3.0 and 3.1 packages there, called syslog-ng and syslog-ng31. The ultimate goal is to include 3.1. Should I drop the current syslog-ng package and rename syslog-ng31 to syslog-ng? Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 4

[opensuse-factory] Is the upgrade from 32 bits to 64 bit supported? Question for devs O:-)
by Carlos E. R. 07 Oct '10

07 Oct '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm asking here a question not related to factory directly, because I want to reach the devs. You can reply on opensuse list instead if you prefer. To keep it short (longer post in the opensuse list), I'm attempting to upgrade from 11.0 to 11.2 (32 bits) using the retail DVD, wich turns out it has only the x64 version. It offers to upgrade to 64 bit the 32 bit install: The architecture of the system installed in the selected partition is different from the one of this product" [continue] [cancel] I said "continue", then I checked the package list. As far as I could see, it intended to replace all packages with those corresponding to the 64 bits version. If this works, fine... but I was afraid, and I cancelled. Not because risking data (it is a copy), but because of possible waste of time. I thought I'd better RFC. Has anybody done this, an upgrade from 32 to 64 bits? Does it work? Is it "supported"? - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" GM (Elessar)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAktvNHIACgkQU92UU+smfQVsTwCfSYFG8N7Owo/PWNu0ylYKGqmr fuQAoJQSLDrMlTDMYeRihU5SfBa0fVz8 =zvu9 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

9 22

[opensuse-factory] 11.2 Release Notes
by Karl Eichwalder 25 Jun '10

25 Jun '10

It would be good if we would start with collection release notes snippets for 11.2 now. Do not hesitate to provide input! Here is some background information: http://en.opensuse.org/Release_Notes -- Karl Eichwalder R&D / Documentation SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 1

[opensuse-factory] Lenovo T410s (11.2 black screen in runlevel 3, 5)
by Martin A. Brown 29 May '10

29 May '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello there, I hope I'm in the right place. I am interested in running the 11.3 Mileston 6 release later in the week, when it becomes available. I have a Lenovo T410s. I have the output of 'hwinfo', which I will happily share. I'm not sending it here, since somebody may want it in a particular place or may not want it at all. I tried installing 11.2, which installs beautifully, but fails on boot, whether I boot to runlevel 3 or 5. The 11.3 Milestone 5 installation failed utterly. I'm looking for advice: - I'm prepared to wait until later in the week, banking on Milestone 6. - Would the 'hwinfo' output be of use to anybody in particular? - Is this a well known issue? - -Martin - -- Martin A. Brown --- Wonderfrog Heavy Industries --- martin(a)wonderfrog.net "I'm trying to ovoid him, but he keeps circling!" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) Comment: pgf-0.72 (http://linux-ip.net/sw/pine-gpg-filter/) iD8DBQFL2HVhki79Zb8hnmwRAiv1AJ0T2sEacl8ViqCl5Ks7nRU75f9wXACeKzgI EEXF0PUEQEaZ3wpGrqh15gs= =izd8 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 6

[opensuse-factory] Factory install report
by Bernhard M. Wiedemann 17 May '10

17 May '10

Hello, I am planning to run regular (e.g. daily to weekly) semi-automatic tests of current factory .isos to increase installability/testability of those and milestone releases for testers, thus increasing overall quality. Todays score is poor. Out of 5 tested .isos only the i586-NET got past the install stage and even then hung during the printer configuration phase, so 0.5/5 would be a fair total. I run this on KVM with a self-made perl script generating keyboard-input and capturing pictures (currently 2/sec). As a nice side-effect, there can now be seen compact ogg-theora-videos of the current boot/install having 6x speed at http://www3.zq1.de/bernhard/mirror/opensuse/video/ You might also notice the predicted remaining time on the NET-install to jump up and down. Also the "Loading Installation System" part of the NET-boot is suspiciously long at 100%... and does not have a size given. If you are interested in those scripts, you can get them from http://www3.zq1.de/bernhard/git/autoinst/ but they are nowhere near perfect, yet. have a lot of fun -- Bernhard M. Wiedemann software engineer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 15

[opensuse-factory] Status of Contrib
by Karsten König 14 May '10

14 May '10

Hello, I was wondering if there is a definite decision about how to go on forward with the seperation of Contrib and mainline Factory. If I remember correctly Contrib was the place to submit stuff to as normal contributor to openSUSE, now Factory is open for everybody to submit stuff, based on reputation, skills and whatnot. So what's the future of Contrib now, this looks like a limbo state to me. Also does openSUSE try to be as inclusive as debian now (everything in one big repository) or seperate atleast into Factory and Contrib? Or even further with repositories like network:utilities, games, GNOME:Extra, KDE:Community etc. which currently have a 'rolling release' way of life. I can't come up with a big weighing pro for any of the possibilities, but I just can't say what model is currently followed. Karsten -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

14 24

[opensuse-factory] SSD discard support? hdparm's wiper.sh?
by Greg Freemyer 10 May '10

10 May '10

All, Let me know where the below should be posted if not the factory list. It relates to how 11.3 will handle SSD discards. === There is currently a fairly large thread on the Ext4 mailing list that I've been participating in. The basic conclusion is that for SSD based drives that can benefit from discards, there are two existing approaches. One is in the current kernels and it involves invoking discard any time data blocks are freed up. Thus it can mean large number of discards per second. This code was written and accepted into the kernel prior to any hardware to really test it with. Apparently now that vendors are shipping SSDs that support discard, that methodology is proving to be a loser and SSD performance is lower if it is enabled, instead of higher which is the entire goal of the discards. I haven't seen benchmarks yet for this with high-end SCSI array backends. If they too are bad, the existing logic is very likely to be tossed from the kernel. Not sure what will replace it in the kernel, if anything. Alternatively, hdparm was enhanced a year or so ago to have several discard related functionalities. That functionality is already in 11.2 and factory, so there's no issue there. But hdparm is only providing base functionality and it needs a script to actually invoke it correctly and cause the appropriate sectors to be discarded. Fortunately Mark Lord (the hdparm maintainer) is now also including "wiper.sh" with hdparm that will scan a filesystem (ext4 and xfs for sure and possibly others) and invoke discard in a very efficient way. I don't think 11.2 or factory are including that script, but I'd like to see it go in as the opensuse 11.3 methodology for calling discard on a SSD. That will mean including the script, testing it as part of opensuse, and getting it in the nightly cron scripts or something. How does a decision like that get made, etc. Thanks Greg -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 5

[opensuse-factory] ooo3
by Donn Washburn 08 May '10

08 May '10

oo3 even as recent as today still has a bug. It is openSuSE's version and is still a pain. It came from a zypper dup from days a go and attempted updated today. Still the same problem "oofromtemplate". It has been in M5 and M6. "creation of executable memory area failed: Too many open files". ooo3 comes up and request fixing the file last opened. Fix it and try to save it. ooo3 crashes. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316

5 12

[opensuse-factory] Status M6
by Stephan Kulow 07 May '10

07 May '10

Hi, Unfortunately we have some pretty bad dependency issue in the KDE stack, so we had to get in another round. But it should still be possible to have it all done till tomorrow. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

18 49

[opensuse-factory] What happened to Gnome in M6
by Rastislav Krupanský 30 Apr '10

30 Apr '10

Hi. Is anything wrong with Gnome in M6? Installation process uses Clearlooks theme (probably) [1] No sonar theme is used by default (never mind, because i don´t like this theme). By default is used Clearlooks. Although are Sonar and Gilouche themes installed, they aren´t available in Appearance ->Theme. Main menu (SLAB) is missing by default. Menu bar is used instead. Two panels are used - top and bottom, not only one. No network icon available in systray. What does it mean? Can we expect some radical modifications? Or is it just a bug? Here you are screenshot [2], what i can see after boot from LiveCD and after installation also. [1] http://img576.imageshack.us/img576/4483/screenshotinstall.png [2] http://img87.imageshack.us/img87/9649/screenshotm6gnome.png -- S pozdravom / Best regards, Rasto -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] M6 locks up Intel on install attempt not addressed on linuxrc page
by Felix Miata 30 Apr '10

30 Apr '10

Is there anything I can try on cmdline other than textmode=1 to prevent lockup on i845G when installation tries to switch to GUI? How do I tell installer on cmdline to use something other than intel driver? I see nothing about this on http://en.opensuse.org/Linuxrc So far failure using alternatively: vga=0x305 vga=normal modeset=0 sax2=1 failsafe ddc=0 noddc I use Grub to load the installation kernel and initrd from local disk instead of burning isos, and don't see any way to access the files in loader/ to see what the options are supposed to be. Thanks to javier on IRC for reminding me about i915.modeset=0, which works. :-) I added a Modeset section to http://en.opensuse.org/Linuxrc with the best information I knew. Maybe there's more it should say, and others can update it. -- "Suppos [sic] a nation in some distant region, should take the Bible for their only law book, and every member should regulate his conduct by the precepts there exhibited. . . . What a Eutopa, What a paradise would this region be!" John Adams, 2nd US President Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] Re: [opensuse-kde] kio_sysinfo crashes in openSUSE 11.3 M6 Build 577 x86_64
by Roman Bysh 29 Apr '10

29 Apr '10

On 04/29/2010 03:14 PM, Rafał Miłecki wrote: > 2010/4/29 Roman Bysh <rbtc1(a)rogers.com>: > >> After getting kio_sysinfo fixed April 23, 2010 and working in openSUSE >> 11.2 KDE 4.4.2. >> Now kio_sysinfo crashes in build 577 openSUSE 11.3 M6 x86_64. A bug >> report has been reopened today. >> > Bug report link, please? > > Original bug report link: https://bugzilla.novell.com/show_bug.cgi?id=570200 Today's bug report link for M6 only provided by another user: https://bugzilla.novell.com/show_bug.cgi?id=600902 -- Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] kio_sysinfo crashes in openSUSE 11.3 M6 Build 577 x86_64
by Roman Bysh 29 Apr '10

29 Apr '10

After getting kio_sysinfo fixed April 23, 2010 and working in openSUSE 11.2 KDE 4.4.2. Now kio_sysinfo crashes in build 577 openSUSE 11.3 M6 x86_64. A bug report has been reopened today. Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] M6 and firefox
by Donn Washburn 29 Apr '10

29 Apr '10

Hey Group; Based on a desktop icon after a zypper dup to M6 firefox is no longer found. It was /use/bin/firefox which is not linked or a script. Click on the icon and nothing happens -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 4

Re: [opensuse-factory] Insatllation on Geode systems
by Richard (MQ) 29 Apr '10

29 Apr '10

On 27/04/10 23:16, James Mason wrote: > On Tue, Apr 27, 2010 at 1:08 AM, Richard (MQ) <osl2008(a)googlemail.com> wrote: >> I've been having lots of problems installing the 11.3 milestones on a >> Geode based Panel PC. This is a reasonably recent machine (purchased >> 2008) albeit low spec - 500MHz CPU, 1G RAM and 8G CF card. Built-in WiFi >> and Bluetooth, though the vt6655 module for these seems very buggy >> (#597299). >> >> The latest issue I'm facing is that the display auto-configuration gets >> it wrong - the text during boot is legible (mode 0x315, display is >> 800x600 native) but later splits to two different (but possibly related) >> problems: >> >> Text consoles (Control-Alt-F1 etc) show just a mass of near-random >> colours, like my old Sinclair spectrum did when it overheated. However, >> the system hasn't crashed: >> >> Control-Alt-F7 takes me to XFCE (lightweight desktop) which runs OK, >> except that the display resolution seems wrong and the title bar of each >> window is corrupt. >> >> Looking at /var/log/messages/Xorg.log gives few clues, the Geode LX >> video chipset seems to be recognised and at 800x600, but I don't know >> where else to look. Nothing obvious in Bugzilla searching for Geode etc. >> >> Has anyone any suggestions before I open another bug? >> >> > what's the output from xrandr ? > > - James Mason 'bear454' Hi James > ~> xrandr > Screen 0: minimum 320 x 200, current 800 x 600, maximum 800 x 800 > default connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm > 800x600 60.3* 60.3 > 640x480 59.9 > 400x300 120.6 > 320x240 120.1 I don't know how to interpret this! -- Cheers Richard -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 6

[opensuse-factory] Insatllation on Geode systems
by Richard (MQ) 28 Apr '10

28 Apr '10

I've been having lots of problems installing the 11.3 milestones on a Geode based Panel PC. This is a reasonably recent machine (purchased 2008) albeit low spec - 500MHz CPU, 1G RAM and 8G CF card. Built-in WiFi and Bluetooth, though the vt6655 module for these seems very buggy (#597299). The latest issue I'm facing is that the display auto-configuration gets it wrong - the text during boot is legible (mode 0x315, display is 800x600 native) but later splits to two different (but possibly related) problems: Text consoles (Control-Alt-F1 etc) show just a mass of near-random colours, like my old Sinclair spectrum did when it overheated. However, the system hasn't crashed: Control-Alt-F7 takes me to XFCE (lightweight desktop) which runs OK, except that the display resolution seems wrong and the title bar of each window is corrupt. Looking at /var/log/messages/Xorg.log gives few clues, the Geode LX video chipset seems to be recognised and at 800x600, but I don't know where else to look. Nothing obvious in Bugzilla searching for Geode etc. Has anyone any suggestions before I open another bug? -- Cheers Richard (MQ) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] new package 'picard'
by Sascha Peilicke 28 Apr '10

28 Apr '10

Hi, I'd like to submit the package 'picard' which contains MusicBrainz Picard, a music file tag editor. This package uses only free components (unlike other 'picard' packages) and adds some useful plugins. My question is which devel project is suited best for it. It's a python-qt4 based GPLv2 app that seems not to be packaged yet in the official repos. It can be found in the project 'home:saschpe' [1]. Footnotes: [1] https://build.opensuse.org/package/show?package=picard&project=home%3Asasch… -- Sascha Peilicke http://saschpe.wordpress.com

4 7

[opensuse-factory] drop xsane with default KDE installation
by Mariusz Fik 27 Apr '10

27 Apr '10

Hi, Do we really need xsane with default KDE installation? skanlite is simple and powerful app and it should be fair enough. -- Pozdrawiam / Best regards, Mariusz Fik, openSUSE Community Member

3 2

[opensuse-factory] How do you rebuild mkinitrd so it loads in the RS780_pfp.bin file
by doiggl＠velocitynet.com.au 26 Apr '10

26 Apr '10

Question: How do you rebuild mkinitrd so it loads in the RS780_pfp.bin file ? I encountered bug https://bugzilla.novell.com/show_bug.cgi?id=596268 Its a mkinitrd issue as indicated by the logged bug. # find . | grep -i RS780_pfp.bin ./lib/firmware/radeon/RS780_pfp.bin ./lib/firmware/2.6.34-rc4-5-desktop/radeon/RS780_pfp.bin The startup error message was [ 2.880555] [drm] Loading RS780 Microcode [ 2.880560] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin [ 62.880180] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" [ 62.880262] [drm:r600_startup] *ERROR* Failed to load firmware! Thanks Glenn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] when is 11.3 milestone 6 due
by doiggl＠velocitynet.com.au 26 Apr '10

26 Apr '10

when is 11.3 milestone 6 due, as I eccountered bug https://bugzilla.novell.com/show_bug.cgi?id=596268 in m5 Thanks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] gnome keyring working for anyone?
by Stefan Seyfried 25 Apr '10

25 Apr '10

Hi factory testers, (I know that opensuse-gnome would be the more appropriate list, but I want to first check if it works for anyone at all). I cannot get gnome keyring to work at all, means: neither nm-applet nor pidgin store the passwords in the keyring, pidgin stores them unobscured in .purple. I also never get asked for a master password. I removed everything .gnome, .gconf, .purple, I also tried a new user. I have a system that has KDE as default, but I installed a truckload of GNOME packages since yesterday, so I think I should not be missing anything anymore (I can also log into GNOME at the KDM login screen). It does not work regardless if I'm logged into GNOME or KDE. Any hints for debugging? Thanks, seife -- Stefan Seyfried "Any ideas, John?" "Well, surrounding them's out." -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 4

[opensuse-factory] kid3
by Werner LEMBERG 24 Apr '10

24 Apr '10

Is there any reason why `kid3' (an ID3 tagging editor for audio files) is only available as kde3-kid3? Any chance that this gets updated? Werner -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

7 14

[opensuse-factory] Fwd: Open Office 3.2.0
by Donn Washburn 24 Apr '10

24 Apr '10

And the document program will not open a file which worked last week 14342 ? Sl 0:11 /usr/lib/ooo3/program/soffice.bin -splash-pipe=5 Open a known good file of a week ago and up comes the needs repair error. I select the file hit Repair and ooo3 crashes. -------- Original Message -------- Subject: Open Office 3.2.0 Date: Thu, 22 Apr 2010 19:05:32 -0500 From: Donn Washburn <n5xwb(a)comcast.net> To: openSuSE Factory <opensuse-factory(a)opensuse.org> Then one that came from a zypper up recently fails to work on a spreadsheet. It comes up with a boot splash, a start menu and select the spreadsheet option. ps ax out - /usr/lib/ooo3/program/soffice.bin -splash-pipe=5 up come the spreadsheet. Open file, it comes up with data and it locks up. The end Minimize it and call it back up. The frame is all that comes up with no data. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 1

[opensuse-factory] New package libvdpau in openSUSE:Factory
by Stefan Dirsch 23 Apr '10

23 Apr '10

Hi I've just added libvdpau as package to openSUSE:Factory. Background is Bug #596481. I would like to see it included on openSuSE 11.3, since I've adjusted also x11-video-nvidiaG02, which now requires it beginning with openSUSE 11.3. If anybody could give it a try together with the current nvidia packages this would be great. Unfortunately the latter need to be built manually via osc build, since I can't provide them for legal reasons - as you might already know. ==> obs://X11:Drivers:Video/libvdpau ==> obs://X11:Drivers:Video/nvidia-gfxG02 (*) (*) check the REAMDE file how to build the packages Best regards, Stefan Public Key available ------------------------------------------------------ Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstraße 5 FAX: 0911-740 53 479 D-90409 Nürnberg http://www.suse.de Germany ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) ----------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 2