November 2010 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Sound in KDE
by Donn Washburn 18 Nov '10

18 Nov '10

Who has done what to the sound in KDE. This is a new effect. The sound work flawless on on TVtime (Line input), YouTube but fails everywhere else KDE4 Alerts and notices , Amarok (PCM inputs). It could be a upgrade to kmix 4.5.3-#. Anyone else seeing this sound problem. openSuSE 11.4 and kernel 2.6.36-18 ALC650F reported by KDE lsmod reports: snd_page_alloc 7785 2 snd_intel8x0,snd_pcm -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] Re: Is it possible to install systemd on openSUSE 11.3?
by Kay Sievers 17 Nov '10

17 Nov '10

On Wed, 2010-11-17 at 11:29 -0500, Roman Bysh wrote: > I'm trying to install systemd on 11.3. Has anyone been successful > installing systemd on openSUSE 11.3? It requires recent: kernel (/sys/fs/cgroup/) udev (service files, interfaces) dbus (interfaces) mkinitrd (bugfixes) ... It might need fixes/changes from: aaa_base screen ConsoleKit ... It's not tested there at all, it might work to update all these packages in 11.3, but things might go wrong. It's probably easier to have a own partition for Factory and just follow it there, instead of messing around with new base system packages in older releases. Kay -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 5

[opensuse-factory] Temporary freeze system in netbook toshiba nb205
by Agustin Chavarria 17 Nov '10

17 Nov '10

Hi! Recently i'm using opensuse 11.4 M2, and i have a serious problem with my netbook When the netbook doesn't have any activity on the keboard or in the mouse, the system stay freezed, and i need to move the mouse, or any key in the keyboard. My laptop have an intel atom, and i have intel 945M like video card. -- Decks Agustin Fco. Chavarria Miembro internacional de opensuse Embajador de opensuse en nicaragua Dj Carbono14-Miembro de TranceDjsNicaragua "No abro documentos de MS Office, solo ODF tel: 84099002 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 8

[opensuse-factory] apparmor
by Peter Czanik 17 Nov '10

17 Nov '10

Hello, I sent a sr for apparmor-profiles almost two weeks ago. 10 days later it was declined, as apparmor-profiles is becoming part of the base apparmor package ( https://build.opensuse.org/request/show/52227 ). I ported my patch from apparmor-profiles to the apparmor package and created another sr ( https://build.opensuse.org/request/show/53065 ). Could this be accepted before the Milestone 4 deadlines? As without the AppArmor profile fix I can't submit my syslog-ng 3.2 package... Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] Status: Distribution
by Stephan Kulow 17 Nov '10

17 Nov '10

Hi, Please note that I triggered the first mass rebuild over the weekend, so the next factory update will be HUGE again. It would be good to know if this fixes something magically - it would be hint that some more packages need to be rebuild automatically. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 8

[opensuse-factory] How can I enable the systemd-Gtk gui ?
by Roman Bysh 16 Nov '10

16 Nov '10

Dear Listmates, I have also installed systemd and systemd-Gtk which should allow the me as user to see systemd in graphical format. Has any one been successful in viewing the gui portion? Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 11

[opensuse-factory] Providing alternative packages for bzip2 and gzip
by Cristian Rodríguez 16 Nov '10

16 Nov '10

Hi: I have been playing around with newer, multithreaded implementations of bzip2 and gzip and is my impression that we need to provide "update-alternatives" to them, so users are able to select their favorite tool. I came to the conclusion that I have no reason to use the traditional "bzip" when compared to "pbzip2" or gzip when compared to "pigz". attached is a compression and decompression time graph of all this tools to give you an idea ;) Cheers.

8 12

Re: [opensuse-factory] Factory - no updates since 02 November
by Sid Boyce 15 Nov '10

15 Nov '10

On 14/11/10 16:51, Donn Washburn wrote: > Using Firefox - No it is not frozen. It came right back up. > Maybe you hit a upload time. Try again > > On 11/14/2010 09:12 AM, Sid Boyce wrote: >> Is factory frozen? >> http://download.opensuse.org/factory/repo/oss/suse/x86_64/ has nothing >> later than that date. >> Regards >> Sid. > I had been tracking it almost daily for a couple of weeks. Looks OK now. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] systemd: How to enable services?
by Andreas Jaeger 15 Nov '10

15 Nov '10

How can we in the rpm spec files enable or disable systemd services - and do this based on information about the current configuration, e.g. enable ssh only if it's enabled for SysVinit to do. AFAIK Fedora uses triggerun and chkconfig like the following: %triggerun -- avahi < 0.6.26-1 if /sbin/chkconfig avahi-daemon ; then /bin/systemctl enable avahi-daemon.service >/dev/null 2>&1 || : fi For details: http://pkgs.fedoraproject.org/gitweb/?p=avahi.git;a=blob;f=avahi.spec;h=2e9… How do we want to do this in openSUSE? This should be added to the following page: http://en.opensuse.org/openSUSE:Systemd_status Andreas -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Factory is unusable back again?
by Jiri Slaby 15 Nov '10

15 Nov '10

Hi, why is factory rebuilding all the stuff again and again? Now it is building binutils (without a source change) and it means I will have to download 2G tomorrow or the day after, like I had to before transitive closure was disabled as a rebuild strategy. Apart from that, BS is pretty unusable (read: slow) due to that even though pkgs with changed sources are preferred by the scheduler. It is consistently building packages for few days already and it is not about to change (recall, it is building binutils now). Why is not factory 'rebuild="local"' any longer? Is this temporary or were there any problems which need be fixed? Is it a build of next MS (I doubt so as it is planned for Nov 25)? thanks, -- js suse labs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Factory - no updates since 02 November
by Sid Boyce 14 Nov '10

14 Nov '10

Is factory frozen? http://download.opensuse.org/factory/repo/oss/suse/x86_64/ has nothing later than that date. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Blender and 11.4 M3
by Donn Washburn 14 Nov '10

14 Nov '10

rpm -q blender -> Blender-2.55.32862-87.6.i586 as of yesterday ~> blender Illegal instruction Same error with both 2.49b and 2.55. Anyone know why or is anyone seeing this problem. It dies without a bootsplash or anything coming up. This is a AMD Athlon-xp system with lots of NVidia hardware. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] howto escape 800x600 with M3's mga driver?
by Felix Miata 12 Nov '10

12 Nov '10

Back in http://lists.opensuse.org/opensuse-xorg/2010-08/msg00007.html using similar subject line I was able to escape 800x600 into 1600x1200 & 2048x1536. Current 11.3 xorg.conf is http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.conf.08-1600x1200x120x24bpp-mga113-… & Xorg.0.log is http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.0.log-113-mga-kt880-1600x1200x120 Now on M3 using same machine and exact same xorg.conf I have the original problem back producing Xorg.0.log http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.0.log-kt880-114M3-800x600 Down at the last 1/3 of the log I see M3 isn't picking up more than minimal default modes, but I don't see why unless (EE) MGA(0): [dri] MGADRIScreenInit failed (libdri.a too old) has something to do with it. Can anyone else tell? Is there a new bug in server 1.9.2 that needs filing, or one someone knows about that I didn't find? Does whatever provides libdri.a need a rebuild? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] drop /usr/sbin/Check?
by Ludwig Nussel 12 Nov '10

12 Nov '10

Hi, AFAICT /usr/sbin/Check only does two things nowadays - compress man pages, info files and fonts - run SuSEconfig.permissions The former is done by brp-compress anyways, except for fonts. The latter is obsolete and I'd like to call the replacement in a separate brp script. So only compressing fonts is left AFAICT. I guess that part could either easily be patched into brp-compress too or just be omitted. So far I only found wqy-bitmapfont where the font compression triggers. Therefore /usr/sbin/Check should be safe to drop, right? cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.de/ SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] chilly foor 11.3 /11sp1?
by Hans Witvliet 12 Nov '10

12 Nov '10

Hi all, During my daily rsync i noticed (i might have been for quite a while, but today i noticed it) a new build version on the OBS of chilly hotspot software. Unfortunately, it is only build (in repo/network:/aaa/ ) for SLE_10 and factory. As i will need it in a couple of weeks, i was wondering if there miht be any chance for the other suse versions (11.3, sles11sp1) Though it might be a piece of cake to get it installed/configured, if there might be an chance of a ready to run/configure version i would rather prefer it. Kind regards, Hans -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 6

[opensuse-factory] NFS and hibernation
by Carlos E. R. 12 Nov '10

12 Nov '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I post this here because I want to add a feature that should not be too dificult. I can write the script, but I need some help with two doubts. I think it is known that the kernel oopses when trying to hibernate a machine and there is an NFS mount (Bug 568132). I wondered if I could create an script in /etc/pm/sleep.d/ that detects there is an NFS mount active, and aborts hibernation warning the user. But my 1st problem is how to detect there is an NFS mount? I tried this: mount | grep "type nfs" but it fails because it hits on: nfsd on /proc/fs/nfsd type nfsd (rw) Maybe I'm foggy now and can't make grep get what I want - too little sleep tonight :-) Perhaps showmount, but I don't know how to make it show only imported filesystems. And after that, I need something in the /etc/pm/sleep.d/00_checknfs script that aborts the process. Some result code, perhaps? Perhaps someone of the devs here knows about that one? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) iEUEARECAAYFAkzb1iMACgkQtTMYHG2NR9Ut8QCeJyyusooPVqimo5hrbr0ITlZQ tfUAmJDLXt5nXGyyOmLKpMR03nbX/qg= =cW0j -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 5

[opensuse-factory] systemd (feature #310327)
by Stephan Kulow 11 Nov '10

11 Nov '10

Hi, There have been various talks about systemd at the openSUSE conference and we would like to go forward. So next step would be a wider testing: so please install systemd and boot with init=/bin/systemd and report issues (here). AJ documented some more details on: http://lizards.opensuse.org/2010/10/08/systemd-and-osc2010/ If you want coloured pictures, compare http://ktown.kde.org/~coolo/bootchart-sysvinit.png and http://ktown.kde.org/~coolo/bootchart-systemd.png Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

19 52

[opensuse-factory] Status: Milestone3
by Stephan Kulow 11 Nov '10

11 Nov '10

Hi, Build845 is considered a good Milestone3 and so I'm uploading it to the mirrors right now. The version updates of that release can be checked here: http://en.opensuse.org/index.php?title=openSUSE%3AFactory_versions&action=h… I hope someone is preparing an announcement. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

9 13

[opensuse-factory] Re: [opensuse-wiki] Dead link in factory iso readme
by pistazienfresser (see profile) 10 Nov '10

10 Nov '10

Am 08/11/10 11:03, schrieb Thomas Schmidt: > On 02.11.2010 23:12, pistazienfresser (see profile) wrote: >> Hello! >> >> Maybe someone could and would update the link to the wiki in the >> README.FIRST (and maybe the article in the actual wiki, too)? >> >> Regards >> pistazienfresser >> >> http://download.opensuse.org/factory/iso/README.FIRST >> http://old-en.opensuse.org/Factory/Status >> >> http://en.opensuse.org/Portal:Factory >> > > Coolo, do you know where to change this file? [...] Thanks for the changing. But the URL is only corrected in the second citation not in the first citation (besides I do not know why it should be citated with full URL two times in that small file at all). README.FIRST 10-Nov-2010 19:05 http://download.opensuse.org/factory/iso/README.FIRST : > These ISO files are published automatically once a new snapshot finished. > They haven't seen any kind of testing before publishing, so download on your > own risk and cost. > > Most of the time they work, but there are times when they are broken - we try > to > update http://en.opensuse.org/Factory/Status as soon as we know about that. > > So visit (and edit if you reported a bug severe enough) > http://en.opensuse.org/Portal:Factory And just in case: maybe a information where and how to report a broken iso-image would be fine, too - e.g on the discussion page to the same wiki-page [if someone would put that on his/her watchlist and activate the email-report] or the factory-mailing-list [with a description how to be able to mail to that list]. Regards pistazienfresser (Martin) -- - openSUSE 11.2 with GNOME 2.28.2 (or KDE 4.3.5) and Kernel Linux 2.6.31.14-0.1-desktop (or ~pae, ~default, Ubuntu 10.4 LTS 'lucid' 2.6.33-24-genetic, MS Win XP) - Samsung X20 Pentium M 740 (1730 MHz) Intel 915GM 1400x1050 - openSUSE profile: https://users.opensuse.org/show/pistazienfresser -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] --download-in default/--download-as-needed invalid
by Felix Miata 10 Nov '10

10 Nov '10

Has this been changed to download-in-advance lately? I doubt any of my Factory systems have enough freespace for 1084 packages to download before installing any of them. Can it be configured somewhere so that I don't have to remember --download-in-heaps or --download-as-needed on cmdline every time? I don't see any examples in zypper.conf to suggest it can. zypper1.5.1-2.1 is complaining "Unknown option '--download-as-needed' and "Unknown option '--download-in-heaps', so I have to manually select small groups of packages to in in order to keep enough freespace on / to function. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] How can debug rpms be linked to their parent rpms
by Dave Plater 10 Nov '10

10 Nov '10

Hi, I've just come across a potential problem, I've put up with the fact that when I update a package I have to explicitly tell zypper or yast to update the debug package. Now I'm in the process of renaming rosegarden4 to it's correct name rosegarden and after a zypper dup -r homeproject I've noticed that the old rosegarden4 debug rpms had remained installed along with the new rosegarden ones. I removed them but it prompted me to ask why debug rpms are no longer linked to their parent package. If I remove a package the debug rpms remain behind and debug packages tend to use a lot of disk space. In the old days if one selected a debuginfo package it's matching debugsource was pulled in and if one removed the parent package the debug rpms were also removed. What is the solution to this? A bug report? An enhancement request? Regards Dave P -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] submitrequest for package R-base into Factory
by Detlef Steuer 09 Nov '10

09 Nov '10

Hi! After some cleaning of up the spec file it seems a good moment to put R-base into Factory. R is a programming language for statistical analysis and graphics. Its homepage is http://www.r-project.org . R is used widely throughout the statistical community both in academia and industry, more and more becoming a de-facto standard for implementing new statistical methods. In its very early days R even was included in SuSE releases, but may be more than 10 years since :-) Its current stable release is R-2.12.0. Since 1.5.1 I am the maintainer for SuSE/Open_SUSE rpm packages of R-base. These packages were created on my own machines until the buildservice emerged. (Thanks again to all involved in setting up and maintaining this incredible resource!) R can be found under science:R-base which is a link to devel:languages:R:base in the build service hierachy. R uses GPL. It is included in Fedora and Debian (and derivatives). If you need any other information I'll be happy to provide it. Detlef -- Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief! Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

Re: [opensuse-factory] Help there's a problem with https://build.opensuse.org/package/show? action menu.
by Sascha Peilicke 09 Nov '10

09 Nov '10

> ... > [11:14] [Notice] -NickServ- > [11:14] [Notice] -NickServ- Syntax: REGISTER <password> <email-address> > [11:14] [Notice] -NickServ- > [11:14] [Notice] -NickServ- Examples: > [11:14] [Notice] -NickServ- /msg NickServ REGISTER bar foo(a)bar.com > [11:14] [Notice] -NickServ- ***** End of Help ***** > [11:16] <davepl> /msg NickServ REGISTER davepl1954 davejplater(a)gmail.com > [11:16] [404] davepl #opensuse-buildservice Cannot send to channel > > My nick is davepl and has been for a long time. > This is taking up my precious time. This may be related to FreeNode's recent auth changes IMO. They moved away from NickServ to SASL auth. -- Mit freundlichen Grüßen, Sascha Peilicke http://saschpe.wordpress.com

3 2

[opensuse-factory] Getting Wrong Letter when Typing Certain Keyboard Button on (CLI) Terminal
by Andi Sugandi 09 Nov '10

09 Nov '10

Hi List mates, I'm running openSUSE 11.4 M2 (?) (I did 'zypper dup' from 11.3, KDE4-LiveCD-x86_64). Overall there is no big problem in GUI, but CLI. I can not login to (CLI) terminal because when I type (from keyboard button): root , the letters appear (in LCD monitor): r66t . I investigate it, and find they are other letters that go wrong when typing certain keyboard buttons: "0" change to "/" "u" change to "4" "i" change to "5" "o" change to "6" "p" change to "*" "j" change to "1" "k" change to "2" "l" change to "3" ";" change to "-" "/" change to "+" and i can see in keyboard button that the "wrong letter' is an optional character when pressing it together with Fn-key. So for example, when i type: Fn+o it "should" get 6, but it is also failed both on GUI and CLI. In opeSUSE 11.3, I did not investigate it deeper yet, but at least i can login to (CLI) terminal without problem. Should i file a bug? My computer is ASUS EEEPC 1201T. $ cat /etc/SuSE-release openSUSE 11.4 Milestone 3 of 6 (x86_64) VERSION = 11.4 CODENAME = Celadon Thanks in advance. Best regards, -- Andi Sugandi. Bandung, Indonesia. openSUSE-id Team, openSUSE Community Member. http://en.opensuse.org/User:Andisugandi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] OpenOfiice
by Donn Washburn 09 Nov '10

09 Nov '10

Why does OpenOffice crash after the bootsplash? It even fails if you goto /usr/lib/ooo3/programs and run the files in that directory directly. like ./scalc or others. I will admit openSuSE's version looks nicer than the Sun version. I sure hope that the effort for LibreOffice works. " http://www.h-online.com/open/features/LibreOffice-A-fresh-page-for-OpenOffi… " -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0