Xorg.0.log seems void of clues I can spot to how to escape 800x600. Using xorg.conf from 11.2 http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.conf.0f-1600x1200x120x16bpp-mga113 produces no apparent difference in result from no xorg.conf at all. Using xrandr in /etc/X11/xinit/xinitrc http://fm.no-ip.com/Tmp/Linux/Xorg/xinitrc-113-mga gets me: # lspci | grep VGA 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 04) # xrandr -q Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm 800x600 60.0* 56.0 640x480 60.0 1600x1200_60.00 (0x10c) 161.0MHz h: width 1600 start 1712 end 1880 total 2160 skew 0 clock 74.5KHz v: height 1200 start 1203 end 1207 total 1245 clock 59.9Hz # xrandr --output default --mode 1600x1200_60.00 xrandr: Configure crtc 0 failed I can't find that error message in archive of either opensuse-xorg or opensuse, and Google only finds some elsewhere that are far older than 11.2, which worked just fine. I tried xorg.conf with & without NoRandr & NoDDC with no apparent impact from either. Last Xorg.0.log: http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.0.log-113-mga-kt880-800x600 Help?!?! -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-xorg+help@opensuse.org