- openSUSE Factory

[opensuse-factory] SPAM: libzypp + rug not updated on one go
by Silviu Marin-Caea 07 Aug '06

07 Aug '06

On a newly installed 10.1, the first update it's libzypp. That's fine. After downloading and applying that, there's another libzypp update! That's starting to be confusing. People start asking, didn't the first go well or what? After that, there's a rug update with the zen-updater. Only alfter all those are applied we have a working update system. Can't they be merged into just _one_ megaupdate? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

3 3

[opensuse-factory] Status of reiser4
by Marcel Hilzinger 07 Aug '06

07 Aug '06

Reiser4 was dropped from 10.1. What about 10.2 As namesys has a lot of (non technical) problems with some members of the kernel-list, they need support from the community to get reiser4 really adopted. I think Suse should still be willing to support new stuff, not as Red Hat. Reiser4 is now quite stable (not mission critical, but stable). For 4.1beta the compression plugin will give reiser4 double speed with half diskspace. Even the support of xattr seems now to be possible. So I would like to see reiser4 back in Suse -- at least with kmp-packages, if not included in the installer. -- Mit freundlichen Grüßen, Marcel Hilzinger Linux New Media AG Süskindstr. 4 D-81929 München Tel: +49 (89) 99 34 11 0 Fax: +49 (89) 99 34 11 99 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

6 8

[opensuse-factory] unable to network install Suse-10.20-Alpha2
by Digvijoy Chatterjee 06 Aug '06

06 Aug '06

hello, I was trying to install 10.2 alpha2 using the internet installation boot image. i did not burn a CD , this is what i had in grub: title Install Suse root (hd0,2) kernel /boot/suselinux install= http://download.opensuse.org/distribution/SL-OSS-Factory/inst-source initrd /boot/suseinitrd The kernel boots,detects devices etc and then fails trying to search for /boot/i386/root in addition to the install path already mentioned in the kernel command line The installer console says: ============================================= eth0 : activated dns : download.opensuse.org is 195.135.221.130 setfont - linuxrc-16.psfu setting up localhost -done going for automatic install loading image "/distribution/SL-OSS-Factory/inst-source/boot/i386/root" http error: 302 found /download/image0 removed loading image "/distribution/SL-OSS-Factory/inst-source/boot/i386/root" http error: 302 found' /download/image0 removed ============================================= The same keeps happening , no matter whichever mirror site I use all fail trying to look for /boot/i386/root ftp://mirrors.kernel.org http://mirror.tamu.edu ftp://ftp.osuosl.org Am i doing something wrong ,or do i need to use some other mirror to install 10.2 alpha2 --Digz

2 1

[opensuse-factory] y2pmsh
by vetter 06 Aug '06

06 Aug '06

Hi, is y2pmsh still supposed to work in 10.1? I do: [0] y2pm > source -s Known sources: [0] y2pm > Is this normal? I expected the equivalent to: # rug sl # | Status | Type | Name | URI --+--------+------+--------------------------------------------------------+------------------------------------------------------------------------------------- 1 | Active | ZYPP | SUSE-Linux-10.1-DVD9-x86-x86_64-10.1-0-20060715-103619 | cd:///?devices=/dev/hdd&alias=SUSE-Linux-10.1-DVD9-x86-x86_64-10.1-0-20060715-103619 2 | Active | ZYPP | SUSE-Linux-10.1-Updates | http://ftp.tu-chemnitz.de/pub/linux/suse/ftp.suse.com/suse/update/10.1 Regards, Andreas --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

3 6

[opensuse-factory] autoyast2-utils
by houghi 05 Aug '06

05 Aug '06

Due to the change from *.sel to *.pak, create_package_descr will be changed. As this is packaged in autoyast2-utils, I wonder if either the newer autoyast2-utils rpm or create_package_descr will be released before Alpha 3, so I can check if it works with makeSUSEdvd. It was said that it might become available with CVS. Any news on that? -- houghi At the source of every error which is blamed on the computer you will find at least two human errors, including the error of blaming it on the computer. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

1 0

[opensuse-factory] Automatic update SL10.1?
by Günther J. Niederwimmer 04 Aug '06

04 Aug '06

Hello, on my computers automatic update is not working ? I found in /var/log/messages the start command but nothing was installed ? is the /etc/cron.d/yast2-online-update entry correct ? eg. 12 17 * * * root rug up -t patch --skip-interactive this Entry was configured with YaST2 Online Update -- mit freundlichen Grüßen / best Regards / avec mes meilleures salutation, Günther J. Niederwimmer --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

5 4

[opensuse-factory] Konsole crashes on Alpha 2
by Arto Viitanen 02 Aug '06

02 Aug '06

When I try to run konsole on OpenSUSE 10.2 Alpha 2 (2xXeon 3.0Ghz, 1GB memory, x86 kernel), it crashes after some lines have been outputted. I tried "ls" nine times and then it crashed. My homedirectory contains files enough to get 56 lines, which gives about 500 lines. However, the History setting is 1000 lines, so the buffer has not overrun, or has it? Anyhow, the backtrace looks like System configuration startup check disabled. (no debugging symbols found) Using host libthread_db library "/lib/libthread_db.so.1". (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread -1232370000 (LWP 5302)] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [KCrash handler] #6 0xffffe410 in __kernel_vsyscall () #7 0xb7d5a7b0 in raise () from /lib/libc.so.6 #8 0xb7d5be83 in abort () from /lib/libc.so.6 #9 0xb7d954a9 in malloc_printerr () from /lib/libc.so.6 #10 0xb7d96aa5 in free () from /lib/libc.so.6 #11 0xb6bac101 in operator delete () from /usr/lib/libstdc++.so.6 #12 0xb6bac15d in operator delete[] () from /usr/lib/libstdc++.so.6 #13 0xb7228edd in QStringData::deleteSelf () from /usr/lib/qt3/lib/libqt-mt.so.3 #14 0xb7ea760f in TEmulation::onRcvBlock () from /opt/kde3/lib/libkdeinit_konsole.so #15 0xb7eae1b9 in TESession::onRcvBlock () from /opt/kde3/lib/libkdeinit_konsole.so #16 0xb7eb86fa in TESession::qt_invoke () from /opt/kde3/lib/libkdeinit_konsole.so #17 0xb6f58d3d in QObject::activate_signal () from /usr/lib/qt3/lib/libqt-mt.so.3 #18 0xb7e92f38 in TEPty::block_in () from /opt/kde3/lib/libkdeinit_konsole.so #19 0xb7e9306b in TEPty::dataReceived () from /opt/kde3/lib/libkdeinit_konsole.so #20 0xb7e9af33 in TEPty::qt_invoke () from /opt/kde3/lib/libkdeinit_konsole.so #21 0xb6f58d3d in QObject::activate_signal () from /usr/lib/qt3/lib/libqt-mt.so.3 #22 0xb74e4eee in KProcess::receivedStdout () from /opt/kde3/lib/libkdecore.so.4 #23 0xb74e4fc8 in KProcess::childOutput () from /opt/kde3/lib/libkdecore.so.4 #24 0xb74e4ff9 in KProcess::slotChildOutput () from /opt/kde3/lib/libkdecore.so.4 #25 0xb74e505a in KProcess::qt_invoke () from /opt/kde3/lib/libkdecore.so.4 #26 0xb7e9aeb3 in TEPty::qt_invoke () from /opt/kde3/lib/libkdeinit_konsole.so #27 0xb6f58d3d in QObject::activate_signal () from /usr/lib/qt3/lib/libqt-mt.so.3 #28 0xb6f59882 in QObject::activate_signal () from /usr/lib/qt3/lib/libqt-mt.so.3 #29 0xb72936f0 in QSocketNotifier::activated () from /usr/lib/qt3/lib/libqt-mt.so.3 #30 0xb6f76f50 in QSocketNotifier::event () from /usr/lib/qt3/lib/libqt-mt.so.3 #31 0xb6ef9cc7 in QApplication::internalNotify () from /usr/lib/qt3/lib/libqt-mt.so.3 #32 0xb6efaa91 in QApplication::notify () from /usr/lib/qt3/lib/libqt-mt.so.3 #33 0xb75b5a52 in KApplication::notify () from /opt/kde3/lib/libkdecore.so.4 #34 0xb6eee9a1 in QEventLoop::activateSocketNotifiers () from /usr/lib/qt3/lib/libqt-mt.so.3 #35 0xb6ea9844 in QEventLoop::processEvents () from /usr/lib/qt3/lib/libqt-mt.so.3 #36 0xb6f10b00 in QEventLoop::enterLoop () from /usr/lib/qt3/lib/libqt-mt.so.3 #37 0xb6f10996 in QEventLoop::exec () from /usr/lib/qt3/lib/libqt-mt.so.3 #38 0xb6ef987f in QApplication::exec () from /usr/lib/qt3/lib/libqt-mt.so.3 #39 0xb7ed2937 in kdemain () from /opt/kde3/lib/libkdeinit_konsole.so #40 0x080484a2 in ?? () #41 0x00000001 in ?? () #42 0xbf9c1f54 in ?? () #43 0x00000000 in ?? () As one sees, there is some references to delete() calls, so it might have something to do with the historybuffer. -- Arto Viitanen arto.viitanen(a)pp4.inet.fi --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

2 9

[opensuse-factory] klik support in openSUSE?
by Silviu Marin-Caea 02 Aug '06

02 Aug '06

It would be nice to have out-of-the box. Any chance of that for 10.2? http://klik.atekon.de/wiki/index.php/Main_Page Added it to http://en.opensuse.org/Wishlist_Productivity#K --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

4 4

[opensuse-factory] fatory x86_64 Openoffice crashes with SCIM
by Truth 01 Aug '06

01 Aug '06

Hi,all I've a problem about the 64bit openoffice 2.0.3. Seems it does not like Chinese Characters. Those i586 2.0.3 rpms work fine for me, while the 64 bit thing always crashes as soon as I type in a Chinese character throuth SCIM (or should I say SKIM) and then asks me about something file recovery. As soon as I click yes, it crashes ( disappears ) then comes up with the same question about file recovery..@&@##%#$^% Happens on both Writer & Calc. Can be reproduced anytime. PS. If I open a file containing Chinese chars. Crash-Recovery-Crash-Recovery-Crash-Recovery......While documents full of English chars are fine. Something wrong with SCIM or Ooo_2 ? x86_64 Factory Distribution OpenOffice_org-2.0.3-3.x86_64.rpm (downloaded days ago) SCIM 1.4.4 SKIM 1.4.5-2 KDE 3.5.4 locale: LANG=zh_CN.UTF-8 LC_CTYPE="zh_CN.UTF-8" LC_NUMERIC="zh_CN.UTF-8" LC_TIME="zh_CN.UTF-8" LC_COLLATE="zh_CN.UTF-8" LC_MONETARY="zh_CN.UTF-8" LC_MESSAGES="zh_CN.UTF-8" LC_PAPER="zh_CN.UTF-8" LC_NAME="zh_CN.UTF-8" LC_ADDRESS="zh_CN.UTF-8" LC_TELEPHONE="zh_CN.UTF-8" LC_MEASUREMENT="zh_CN.UTF-8" LC_IDENTIFICATION="zh_CN.UTF-8" LC_ALL= --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

2 1

[opensuse-factory] updating m4 package from factory
by Chema Ollés 29 Jul '06

29 Jul '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all: I try to upgrade my system and see that if I update m4 from 1.4.4-12@i586 to 1.4.5-2@i586,smart delete my autoconf 2.60-2@i586 because is related with the old m4 version.I can't see any new autoconf on factory directory... Is it normal this lack? Regards - -- Chema Ollés Usuario Linux: #198057 Linux 2.6.16.21-2-smp #1 SMP Wed Jul 5 17:47:38 UTC 2006 i686 GNU/Linux -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.4 (GNU/Linux) iD8DBQFExNyv65SpD7GhbzoRAhaBAJkBMPHzgA0hb+Hnf+IpAFGI7WpCxQCfUihz b8Ga6RgeYPOx9Lv+1Q3w6Qk= =LVEn -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory-help(a)opensuse.org

6 10