March 2021 - openSUSE Factory - openSUSE Mailing Lists

openSUSE Release Engineering Meeting 17.3.2021
by Lubos Kocman 05 May '21

05 May '21

All meeting minutes can be found here: https://etherpad.opensuse.org/p/ReleaseEngineering-meeting ## Participants dleuenberger, ddemaio, rbrown, skriesch, guillaumeg, lkocman, wengel, maxlin, sbahling, gp !!! Please be aware that this meeting is hosted on https://meet.opensuse.org/ReleaseEngineeringMeeting ## Leap <-- I believe a heading is missing here: 20 of 7 .. of what? x86_64 20/7 i586 0/0 aarch64 74/10 armv7 117/99 ppc64le 119/115 s390x 163/625 Agreement is to have 0 on intel, and hopefully aarch64. Everything else should be as good as it can get. https://progress.opensuse.org/issues/76348 Current blocker for publishing further updates: https://bugzilla.opensuse.org/show_bug.cgi?id=1183073 <- should be fixed? packman - debuginfo / debugsource, inode.at mirror is broken Discussion about SUMA-23 (cobbler + pulp repo as a lightweight RMT alternative community feature request). Depends on libmodulemd and librepo ECOs. So far we've agreed to do these. SUMA team will reach out to me again in 3 weeks. ## openSUSE Tumbleweed * grub2 with boothole v2 fixes was released for TW in snapshot 0315 * glibc 2.33 / i586 fix was confirmed by users. A full rebuild of the snapshot was published, which brought the download infra close to the ground again. * SELinux enabling during the installation phase; default is switched to 'disabled', as I'm not happy with the UX (two reboots post install) * GNOME 40.beta is ready in the GNOME:Next repo (UI changes, dock now at the bottom; TW will see it end in March/April timeframe if nothing bad comes up) * GCC 11 as the default compiler is being tested in a Staging ## Richard (Kubic/TW MicroOS) Preparing for MicroOS Desktop for Hackweek https://hackweek.suse.com/20/projects/microos-desktop SELinux tests under review ## Max * We're free from Beta blocker (boo#1182776, bsc#1182891) * noarch packages issue (bsc#1181832, bsc#1183097) * Another 000package-groups change against sles-release for fix zypper dup from Leap 15.3 to SLE15 SP3 bsc#1181829 ## Guillaume - Arm Tumbleweed: * Bug with grub/shim on aarch64 fixed: https://bugzilla.suse.com/show_bug.cgi?id=1183213 * New bug with kiwi: MicroOS images are unbootable: https://bugzilla.opensuse.org/show_bug.cgi?id=1183635 * Evaluating the option to enable in-kernel Memory Tagging Extension (MTE) support via KASAN for aarch64 in kernel-debug. E-mail sent to openSUSE kernel mailing list to get some feedback in parallel to my tests. Leap 15.3 ARM: * aarch64: Bug in grub/shim fixed: https://bugzilla.suse.com/show_bug.cgi?id=1182776 * Armv7: * initial openQA setup done : https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.3&bui… * armv7 NET ISO is now bootable but grub has no theme and it hangs at 'Hardware detection' WSL: Stalled: WIP to have WSL on aarch64 on https://build.opensuse.org/project/show/home:Guillaume_G:WSL The goal is to have WSL-DistroLauncher package built for aarch64. Help welcomed. SUSE is currently interviewing candidates for the WSL Engineering post. So far Jeff is still the only person working on the Engineering efforts (native kiwi support, and some current WSL build blockers on SLE). Lubos is currently considering a hackweek project for WSL / aarch64. This is currently the plan. ## Michel ppc64le Not available ## Sarah - s390x * new Tumbleweed builds * Leap 15.3 test issue because of SLE test dependency: https://progress.opensuse.org/issues/81685 Lubos: Contact Ihno Kumreich for any questions for s390x/SLE Engineering. I can try to help as well. ## Doug * Leap 15.3 * Still - https://en.opensuse.org/In_the_press_15.3 * Beta t-shirts still coming in * openSUSE Conference (June 18 - 20) * Have access to tool opensuse.venueless.events * GSoC Mentor Org * Is anyone interested in mentoring rpmlint * Shells status * Lifecycle discussion ## Dirk Focused on remaining bootstrap tasks (ghc, fpc, ...), work in progress Backports still has a lot of failures (also on x86_64) Step: Still a lot of unsolved issues (e.g. requirements on sles- release, but sles-release disabled for non-SLE architectures) ## Gerald Based on report on the project@ list: can we see to spread out Beta/RC releases of Leap and larger Tumbleweed snapshots as not to overload mirrors? Lubos indicated he'd look into that with Dominique. ## Wolfgang (Package Hub), Scott Bahling no update ## Adrian - CtLG or openSUSE Step RISC-V/TW is not represented on this call. We still don't know how to release ftp-tree for armv7. Lubos: https://github.com/openSUSE/get-o-o/issues/34

5 6

GNOME - gnome-shell does not react to menu/cannot select user session type
by Andrei Borzenkov 17 Apr '21

17 Apr '21

Since recently I have rather strange situation on QEMU VM running TW/GNOME. Only standard TW repositories are there and I did multiple zypper dup since I noticed this issue. 1. I cannot select user session in GDM greeter. I do get (correct) list of available sessions and I can click on one of them, but if I open list again default session is checked and default session is started. If wayland is not disabled in gdm, gnome Wayland session is started. If I disable Wayland in gdm, it starts X11 session. 2. After logging in gnome-shell seems to ignore at least some menu clicks I do. Activities button in top panel works. I can open list of applications and start one or I can perform search. Also clicking on Calendar in the middle opens it. When I click on system menu it opens, but no menu item works. I click on anything and menu simply disappears without any action. When monitoring session D-Bus I see single request method call time=1616230117.086540 sender=:1.9 -> destination=:1.5 serial=399 path=/org/gnome/SessionManager; interface=org.gnome.SessionManager; member=CanShutdown method return time=1616230117.092200 sender=:1.5 -> destination=:1.9 serial=241 reply_serial=399 boolean true While I can open Terminal via Activities, I cannot open the *second* window by either right-click on Terminal icon or using Terminal menu in top panel. Again - menu opens, I click on "New Window" and nothing happens. There is also no D-Bus traffic at all. I can open additional tabs in the single available window though and then I see normal D-Bus request to Terminal server. During attempt to somehow troubleshoot this I /once/ was able to both use System menu and open additional Terminal windows, but it reverted to previous behavior even in the same session after this. After restart or logout/login it always exhibits this problem. New clean user shows the same behavior. Both Wayland and X11 sessions show the same behavior. If anyone has an idea how to troubleshoot it I would be quite thankful. It does appear to be gnome-shell related as far as I can tell. It seems to have started two - three weeks ago (well, I fire up VM only occasionally to check something so I cannot be sure when exactly; I may have updated and did not notice it until next time).

1 1

Re: RFC: New devel project devel:languages:python:pyqt and deal with different SIP versions
by Simon Lees 15 Apr '21

15 Apr '21

Hi, Firstly Cross posting to factory as there is a chance not everyone who needs to read this is on packaging@ (more for packaging help and support) On 2/20/21 6:18 AM, Ben Greiner wrote: > Hello, > > python-sip, python-qt5 and co. have always been kind of a foreign body > to C++ focused KDE:Qt5. May I propose to create > devel:languages:python:pyqt and put related packages into that one? > Maintainers could be python and QT/KDE people together. Its worth noting that currently python-qt etc is staged and bought up with each Qt version https://build.opensuse.org/package/show/KDE:Qt:5.15/python-qt5 for example so how well this change will work with the existing Qt setup I guess we will have to wait for the KDE/Qt people to answer. > ## List of existing packages to be considered: > > python-pyqt-builder > python-pyqt-rpm-macros > python-qt3d-qt5 > python-qt5 > python-qt5-sip > python-qtcharts-qt5 > python-qtdatavis3d-qt5 > python-qtwebengine-qt5 > python-sip > python-sip4 > qscintilla-qt5 > > ## New packages to be created (using the PyPI names as naming template > instead of continuing the legacy rpm package names. Of course > appropriate `Provides:` tags for the rpm names should be included): > > python-PyQt6 (also providing python-qt6) > python-PyQt6-sip (also providing python-qt6-sip) > python-PyQt6-3D (also providing python-qt3d-qt6) > python-PyQt6-NetworkAuth (also providing python-networkauth-qt6) > python-sip6 (see below) > ... and more of the family as they are released upstream. > > ## Not PyQt[56] but closely related or the "competitor": > > python-PySide6 > python-PySide2 (currently python3-pyside2) > python-QtAwesome > python-QtPy > python-poppler-qt5 > qutebrowser > eric > ... > > > There is also SIP v6 now. Some packages still depend on SIP v4 (e.g. > cura libraries) or use the legacy features of SIP v5 (e.g. the sip5 > executable), so we can't just have a single up to date python-sip. After > some discussion with DimStar a few days ago, I propose, what I call the > "tornado approach", because it is what python-tornado is doing right now: > > * Have python-sip4, python-sip5, python-sip6, all providing python-sip > * Make python-sip a meta package and have it require the currently > preferred default (python-sip5 at the moment). > * Have the appropriate `Prefer:` tags in prjconf. > > Thoughts and comments welcome! > > Ben -- Simon Lees (Simotek) http://simotek.net Emergency Update Team keybase.io/simotek SUSE Linux Adelaide Australia, UTC+10:30 GPG Fingerprint: 5B87 DB9D 88DC F606 E489 CEC5 0922 C246 02F0 014B

7 12

openSUSE Release Engineering Meeting 31.03.2021
by Lubos Kocman 14 Apr '21

14 Apr '21

https://pad.riseup.net/p/ReleaseEngineering-20210331 is a backup etherpad as we can't really use etherpad.opensuse.org because of https://progress.opensuse.org/issues/90230 All meeting minutes can be found here: https://etherpad.opensuse.org/p/ReleaseEngineering-meeting ## Participants lkocman, rbrown,guillaumeg, adrian, nathankeith, ddemaio, jackson, sbahling, maxlin, gerald, adrians, sarah, wolfgang !!! Please be aware that this meeting is hosted on https://meet.opensuse.org/ReleaseEngineeringMeeting ## Leap Build failures x86_64 20/7 (today 11/1) i586 0/0 (0/0) aarch64 74/10 (74/9) armv7 117/99 113/139 ppc64le 119/115 (112/113) s390x 163/625 (160/624) Agreement is to have 0 build failures on intel, and hopefully aarch64. Everything else should be as good as it can get. https://progress.opensuse.org/issues/76348 Discussion around noarch source https://bugzilla.opensuse.org/show_bug.cgi?id=1183097 We'd like to discuss proposals on the bottom of the. Looking with Jiri Srain into free variant of SLE Micro, something that could be migratable to SLE, otherwise it would be Kubic. April 21st is RC Code submissiond deadline. I'll work on an assignment and deadlines for Leap 15.3 RC tasks. Still have to look into what pieces of translations need to be handled after CtLG and what not. I did briefly talk to sbrabec on this topic. A new Leap 15.3 build today Build117.13, hopefully we can get it published soon. ## openSUSE Tumbleweed * SELinux 3.4 update caused a larger rebuild than expected, issues for users were saved thanks to Bernhard's excellent work delaying publishing of large snapshots (Thanks again!) * SELinux enabling during the installation phase was improved, cutting down the reboots required * GNOME 40 is submitted, waiting for some fixes in other packages impacted by the glib2 changes * Python 3.9 is in staging, requiring some modules to be improved * GCC 11 as the default compiler is being tested in a Staging ## Richard (Kubic/TW MicroOS) MicroOS Desktop (GNOME) Beta has been released, some pattern tuning identified before it can be considered production ready transactional-updates 3.3.0 was released SELinux is now the default on MicroOS ## Max * Hackweek, Leap has not making much progress * patterns-cinnamon is now exist in Leap 15.3(Note: not Backports) * arm and powerpc have got problem with plymouth, we've a reverted plymouth in Leap for the time being bsc#1184087 ## Guillaume - Arm Tumbleweed: * Rolling, no blocker * In-kernel Memory Tagging Extension (MTE) support via KASAN for aarch64 will go to kernel-debug. Leap 15.3 ARM: * aarch64: * Plymouth bug: https://bugzilla.suse.com/show_bug.cgi?id=1184087 (update reverted by Max) * ghc: unresolvable: https://bugzilla.opensuse.org/show_bug.cgi?id=1184126 * Few updates submitted to backports to get rid of unresolvables * Armv7: * initial openQA setup done : https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.3&bui… * armv7 NET ISO is now bootable but grub has no theme and it hangs at 'Hardware detection'. Let's see if next snapshot is better. WSL: Stalled: WIP to have WSL on aarch64 on https://build.opensuse.org/project/show/home:Guillaume_G:WSL The goal is to have WSL-DistroLauncher package built for aarch64. Help welcomed. SUSE is currently interviewing candidates for the WSL Engineering post. So far Jeff is still the only person working on the Engineering efforts (native kiwi support, and some current WSL build blockers on SLE). Lubos is currently considering a hackweek project for WSL / aarch64. This is currently the plan. ## Michel ppc64le Not available ## Sarah - s390x * openSUSE for s390x is maintained by the community in the future. There is a contract rule, that no IBMer is allowed to contibute for openSUSE on IBM Z without having anybody for Fedora in the same role. * Tumbleweed: no blockers * Leap 15.3 test issue because of SLE test dependency: https://progress.opensuse.org/issues/81685 (will be ignored) Lubos: Contact Ihno Kumreich for any questions for s390x/SLE Engineering. I can try to help as well. Will not be available next meeting. ## Doug * Leap 15.3 * Almost finished with https://en.opensuse.org/Features_15.3 * Beta t-shirts still coming in (shipped a few in NA) * Marketing meeting and sprints today and tomorrow - https://bit.ly/2OeuD8c * openSUSE Conference (June 18 - 20) * GSoC Mentor Org (student applications until April 13) * Leap 15.3 Box - discussion in progress (currently just missing up2date German install manual) ## Dirk Not much progress last week due to Hackweek. Resumed looking at Leap 15.3/Step 15 work. A lot of issues with backports and missing updates in SLE side. Step: Still a lot of unsolved issues (e.g. requirements on sles- release, but sles-release disabled for non-SLE architectures) ## Gerald Based on report on the project@ list: can we see to spread out Beta/RC releases of Leap and larger Tumbleweed snapshots as not to overload mirrors? Lubos indicated he'd look into that with Dominique. ## Wolfgang (Package Hub), Scott Bahling Issue with noarch packages, mentioned at the end of meeting notes. (Possible reworking of PH in 15.4) ## Adrian - CtLG or openSUSE Step RISC-V/TW is not represented on this call. We still don't know how to release ftp-tree for armv7. Lubos: https://github.com/openSUSE/get-o-o/issues/34 (Inputs from Max, Wolfgang, Scott, Lubos). A discussion regarding https://bugzilla.opensuse.org/show_bug.cgi?id=1183097 We'd like to have an approval from Adrian on which solution to go for. Currently Preferred solution is (4). Options: 1) we delete(or disable flavor) every package if it builds noarch(either it has noarch binary only or containing arch-dependent + noarch[1]) binary RPM and that package has been excluding to build on any arch. Take mumps as the example, we should disable gnu-mpich- hpc/gnu-mvapich2-hpc/gnu-mvapich3-hpc/ gnu-mvapich4-hpc flavor completely, leave other flavor as it is. Another example librepository[2], just delete it since it’s noarch only(BuildArch: noarch) package. Pro: solve noarch binary issue Con: PackageHub would not providing some packages for all archs. *noarch* package is fine, but *arch-dependent + noarch* will losing since the package removal, for example libmumps-gnu-openmpi4-hpc-5.3.5- bp153.1.1.ppc64le.rpm in [1] This may increase amount of open bugs from customer side such as “Package is no longer available in Backports”. [1] https://build.opensuse.org/package/binaries/openSUSE:Backports:SLE-15-SP3/m… see ppc64le result [2] https://build.opensuse.org/package/show/openSUSE:Backports:SLE-15-SP3/libre… 2) somehow filter out these duplicite noarch rpms on publishing/releasing process Con: this is would be a manually maintained list, which we’d like to see disappear in 15.4. But will it? Pro: PackageHub consumers will still get all rpms unlike in (1) 3) Long term, handle building exclusively in Leap / SLE projects, backports would just then handle publishing of “diff”. Right now we have to build same srpms twice and figure out the magic. This should be something to look into for 15.4 Con: Quite a lot of work in the beginning Pro: cleaner build and release pipeline (this issue will simply go away) 4) like 1) we delete(or disable flavor) every package if it builds noarch(either it has noarch binary only or containing arch-dependent + noarch[1]) binary RPM and that package has been excluding to build on any arch. Proving them from subpackage module (repository for unrelease packages from SLE) instead(SLE built). Pro: solve noarch binary issue. And those binaries in subpackage module were SLE built, not the Backports rebuild binaries. Con: find a list of packages adding to subpackage module Adrian: 4th seems to be the option if it's also Runtime issues. Adrian: we have to create an additional channel (subpackages already exist, we just need to modify it). Max: will work on the list of packages that will have to be added to the subpackage module. (5)Adrian: we could add a side-layer on top of current backpots to incorporate SLE packages and opt out Leap.

2 1

latest version of vim-plugin-latex is missing in Tumbleweed
by Filip Kadlec 12 Apr '21

12 Apr '21

Hello, I have been using Tumbleweed for several years now, convinced that "Any user who wishes to have the newest packages that include, but are not limited to, the Linux kernel, ... and many other packages, will want Tumbleweed." (from https://build.opensuse.org/project/show/openSUSE:Factory ) It seems, however, that the vim-plugin-latex package included in the distribution (as well as in Leap) is quite outdated: Yast reports 20120125-39.6, so more than nine years old (?) although the Change Log in Yast shows some later changes, the newest being the line: Mon 11 Nov 2019 13:00:00 CET Johannes Thumshirn <jthumshirn(a)suse.com> - Update vim-plugin-fugitive to upstream version 3.1 In fact, some features introduced 6 years appear to be missing in the package within the distribution, namely the Python support, https://github.com/vim-latex/vim-latex/blame/master/ftplugin/latex-suite/ma… Consequently, the plugin implements wrongly some important functionality, such as multiple compilation (see, e.g., ":help compiling-multiple" within vim or gvim). This is perhaps a simple omission to include a newer version into the distro, or may this be an intention...? Anyway, I would like to point at this obsolete package, hoping the latest version can be included into the distribution update. Best regards, Filip

7 13

New Tumbleweed snapshot 20210212 released!
by Dominique Leuenberger 12 Apr '21

12 Apr '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: MozillaThunderbird (78.7.0 -> 78.7.1) apache2-mod_php7 (7.4.14 -> 7.4.15) ceph (16.0.0.5613+gb1a0951432 -> 16.1.0.46+g571704f730) dosfstools (4.1+git.1610658652.9443732 -> 4.2) ffmpeg-4 fftw3 gcc10 gcc11 (11.0.0+git182924 -> 11.0.0+git183291) glib2 (2.66.4 -> 2.66.6) glibc (2.32 -> 2.33) ibus kde-gtk-config5 kernel-source (5.10.12 -> 5.10.14) libevent libqt5-qtbase libreoffice (7.0.4.2 -> 7.1.0.3) libselinux libshout (2.4.4 -> 2.4.5) libwebp (1.1.0 -> 1.2.0) lightdm logrotate (3.17.0 -> 3.18.0) nghttp2 (1.42.0 -> 1.43.0) nodejs-common openssh php7 (7.4.14 -> 7.4.15) pigz (2.4 -> 2.6) pinentry postfix (3.5.8 -> 3.5.9) python-pybind11 (2.5.0 -> 2.6.2) python-requests qemu re2 (20201101 -> 20210202) rubygem-i18n (1.8.7 -> 1.8.8) rubygem-rspec-mocks (3.10.1 -> 3.10.2) rubygem-rspec-support (3.10.1 -> 3.10.2) thai-fonts unixODBC v4l2loopback virtualbox virtualbox-kmp (6.1.18_k5.10.12_1 -> 6.1.18_k5.10.14_1) wpa_supplicant yast2-trans (84.87.20210130.332fb904b7 -> 84.87.20210205.68980f3ed7) === Details === ==== MozillaThunderbird ==== Version update (78.7.0 -> 78.7.1) Subpackages: MozillaThunderbird-translations-common - Mozilla Thunderbird 78.7.1 * CardDAV address books now support OAuth2 and Google Contacts * Thunderbird will no longer allow installation of addons that use legacy APIs ==== apache2-mod_php7 ==== Version update (7.4.14 -> 7.4.15) - updated to 7.4.15: This is a security release which also contains several bug fixes. See https://www.php.net/ChangeLog-7.php#7.4.15 - suppress warning for all flavors not equal to "" in multibuild % php7.rpmlintrc - add versioning to php-sapi as well - require this PHP version of subpackages in Recommends/Suggests - run apache-rex tests in php7:test as packages need to be build first (otherwise tests run with previous version) - add php_cfgdir and php_extdir macros ==== ceph ==== Version update (16.0.0.5613+gb1a0951432 -> 16.1.0.46+g571704f730) Subpackages: librados2 librbd1 - Update to 16.1.0-46-g571704f730 + rebase on top of upstream v16.1.0 (Pacific release candidate) + drop obsolete downstream patches that were causing conflicts: * cephadm: use registry.suse.com by default * cephadm: add global flag --container-init * mgr/cephadm: append --container-init to basecommand * cephadm: remove container-init subparser from "deploy" - Update to 16.0.0-7500-g78f6791981: + cephadm: add global flag --container-init + mgr/cephadm: append --container-init to basecommand + cephadm: remove container-init subparser from "deploy" - Update to 16.0.0-7497-g63a0682c7e: + rebase on tip of upstream "master" branch, SHA1 8c6b533ee85e7fe2cd19e5dbb6f0363898f5a2ee - Update to 16.0.0-6239-g0c2e605e78: + rebase on tip of upstream "master" branch, SHA1 6d1f1f63b711797e21ff8ff12662d07d86546e66 * cephadm: Fix error setting 'mgr/cephadm/container_init' config (PR #37500) - Update to 16.0.0-6229-g71574673b0: + rebase on tip of upstream "master" branch, SHA1 f68197eca4b4dceef9fbf497d640b4600663d3ed * ceph-volume: don't exit before empty report can be printed (PR #37591) - Update to 16.0.0-6177-g01e4ab745b: + rebase on tip of upstream "master" branch, SHA1 f8ea1f38aee3d8715186a756331a23d4b51121f2 * ceph-volume: pass filter_for_batch as keyword argument (PR #37545) - Update to 16.0.0-6162-g892bfa3fef: + drop the following commits: + lvmcache: refactor argument parsing and add -h flag + ceph-volume: install lvmcache plugin + ceph-volume: add lvmcache plugin and its tests + rebase on tip of upstream "master" branch, SHA1 0a92d5094fc0baae3af223aa16b271d2e5e6f349 + mgr/devicehealth: device_health_metrics pool gets created even without any OSDs in the cluster (bsc#1173079) ==== dosfstools ==== Version update (4.1+git.1610658652.9443732 -> 4.2) - update to 4.2: * mkfs.fat: Allow to specify disk geometry via new -g option * fsck.fat: Add code for fixing first FAT cluster * fatlabel: Do not call parts of fsck repair procedure * Update warning message about lowercase labels * mkfs.fat: Read geom_start from sysfs * Add missing files into distribution tarball ==== ffmpeg-4 ==== Subpackages: libavcodec58_91 libavdevice58_10 libavfilter7_85 libavformat58_45 libavresample4_0 libavutil56_51 libpostproc55_7 libswresample3_7 libswscale5_7 - Add 0001-avformat-vividas-improve-extradata-packing-checks-in.patch [boo#1180519] [CVE-2020-35964] ==== fftw3 ==== Subpackages: libfftw3-3 libfftw3_threads3 - Add build support for gcc10 to HPC build (bsc#1174439). ==== gcc10 ==== Subpackages: cpp10 gcc10-info gcc10-locale libstdc++6-devel-gcc10 - Remove include-fixed/pthread.h - Change GCC exception licenses to SPDX format ==== gcc11 ==== Version update (11.0.0+git182924 -> 11.0.0+git183291) Subpackages: libasan6 libatomic1 libgcc_s1 libgcc_s1-32bit libgfortran5 libgomp1 libitm1 liblsan0 libobjc4 libquadmath0 libstdc++6 libstdc++6-32bit libstdc++6-locale libstdc++6-pp-gcc11 libstdc++6-pp-gcc11-32bit libtsan0 libubsan1 - Bump to efcd941e86b507d77e90a1b13f621e036eacdb45. - Bump to 7a18bc4ae62081021f4fd90d591a588cac931f77. - New package, inherits from gcc10 * gcc-add-defaultsspec.diff, add the ability to provide a specs file that is read by default * tls-no-direct.diff, avoid direct %fs references on x86 to not slow down Xen * gcc43-no-unwind-tables.diff, do not produce unwind tables for CRT files * gcc41-ppc32-retaddr.patch, fix expansion of __builtin_return_addr for ppc, just a testcase * gcc44-textdomain.patch, make translation files version specific and adjust textdomain to find them * gcc44-rename-info-files.patch, fix cross-references in info files when renaming them to be version specific * gcc48-libstdc++-api-reference.patch, fix link in the installed libstdc++ html documentation * gcc48-remove-mpfr-2.4.0-requirement.patch, make GCC work with earlier mpfr versions on old products * gcc5-no-return-gcc43-workaround.patch, make build work with host gcc 4.3 * gcc7-remove-Wexpansion-to-defined-from-Wextra.patch, removes new warning from -Wextra * gcc7-avoid-fixinc-error.diff * gcc9-reproducible-builds-buildid-for-checksum.patch * gcc9-reproducible-builds.patch * gcc10-amdgcn-llvm-as.patch * gcc10-foffload-default.patch - libgccjit subpackage is added. - HWASAN is built for aarch64 target. ==== glib2 ==== Version update (2.66.4 -> 2.66.6) Subpackages: glib2-lang glib2-tools libgio-2_0-0 libgio-2_0-0-32bit libglib-2_0-0 libglib-2_0-0-32bit libgmodule-2_0-0 libgmodule-2_0-0-32bit libgobject-2_0-0 libgobject-2_0-0-32bit libgthread-2_0-0 libgthread-2_0-0-32bit - Update to version 2.66.6: + Fix various instances within GLib where `g_memdup()` was vulnerable to a silent integer truncation and heap overflow problem (glgo#GNOME/GLib#2319). - Update to version 2.66.5: + Fix some issues with handling over-long (invalid) input when parsing for `GDate`. + Don?t load GIO modules or parse other GIO environment variables when `AT_SECURE` is set (i.e. in a setuid/setgid/setcap process). GIO has always been documented as not being safe to use in privileged processes, but people persist in using it unsafely, so these changes should harden things against potential attacks at least a little. Unfortunately they break a couple of projects which were relying on reading `DBUS_SESSION_BUS_ADDRESS`, so GIO continues to read that for setgid/setcap (but not setuid) processes. This loophole will be closed in GLib 2.70 (see issue #2316), which should give modules 6 months to change their behaviour. + Fix `g_spawn()` searching `PATH` when it wasn?t meant to. + Bugs fixed: bgo#2168, bgo#2210, bgo#2305, glgo#GNOME/GLib!1820, glgo#GNOME/GLib!1824, glgo#GNOME/GLib!1831, glgo#GNOME/GLib!1836, glgo#GNOME/GLib!1864, glgo#GNOME/GLib!1872, glgo#GNOME/GLib!1913, glgo#GNOME/GLib!1922. - Rebase/refresh patches: + glib2-dbus-socket-path.patch + glib2-fate300461-gettext-gkeyfile-suse.patch + glib2-gdbus-codegen-version.patch + glib2-suppress-schema-deprecated-path-warning.patch + glib2-bgo569829-gettext-gkeyfile.patch ==== glibc ==== Version update (2.32 -> 2.33) Subpackages: glibc-32bit glibc-devel glibc-extra glibc-lang glibc-locale glibc-locale-base nscd - Update to glibc 2.33 * The dynamic linker accepts the --list-tunables argument which prints all the supported tunables. * The dynamic linker accepts the --argv0 argument and provides opportunity to change argv[0] string. * The dynamic linker loads optimized implementations of shared objects from subdirectories under the glibc-hwcaps directory on the library search path if the system's capabilities meet the requirements for that subdirectory. * The new --help option of the dynamic linker provides usage and information and library search path diagnostics. * The mallinfo2 function is added to report statistics as per mallinfo, but with larger field widths to accurately report values that are larger than fit in an integer. * Add <sys/platform/x86.h> to provide query macros for x86 CPU features. * A new fortification level _FORTIFY_SOURCE=3 is available. * The mallinfo function is marked deprecated. * When dlopen is used in statically linked programs, alternative library implementations from HWCAP subdirectories are no longer loaded. * The deprecated <sys/vtimes.h> header and the function vtimes have been removed. * On s390(x), the type float_t is now derived from the macro __FLT_EVAL_METHOD__ that is defined by the compiler, instead of being hardcoded to double. * A future version of glibc will stop loading shared objects from the "tls" subdirectories on the library search path, the subdirectory that corresponds to the AT_PLATFORM system name, and also stop employing the legacy AT_HWCAP search mechanism. * CVE-2021-3326: An assertion failure during conversion from the ISO-20220-JP-3 character set using the iconv function has been fixed. - Remove obsolete, unused /etc/default/nss - aarch64-static-pie.patch, euc-kr-overrun.patch, get-nprocs-cpu-online-parsing.patch, iconv-redundant-shift.patch, iconv-ucs4-loop-bounds.patch, ifunc-fma4.patch, intl-codeset-suffixes.patch, nscd-gc-cycle.patch, printf-long-double-non-normal.patch, strerrorname-np.patch, syslog-locking.patch, sysvipc.patch: Removed - Remove support for %optimize_power - Move to power4 baseline on ppc ==== ibus ==== Subpackages: ibus-dict-emoji ibus-gtk ibus-gtk-32bit ibus-gtk3 ibus-lang libibus-1_0-5 libibus-1_0-5-32bit typelib-1_0-IBus-1_0 - Fix the invalid desktop file for auto start (boo#1178447) - Fix xim.d/ibus so that a Plasma session can use XDG auto start ==== kde-gtk-config5 ==== Subpackages: kde-gtk-config5-gtk3 - Add patch to not pollute stdout, which broke some applications (boo#1182151, kde#431365): * 0001-Remove-debug-message-to-avoid-polute-to-stdout.patch ==== kernel-source ==== Version update (5.10.12 -> 5.10.14) Subpackages: kernel-default kernel-docs - Linux 5.10.14 (bsc#1012628). - workqueue: Restrict affinity change to rescuer (bsc#1012628). - kthread: Extract KTHREAD_IS_PER_CPU (bsc#1012628). - x86/cpu: Add another Alder Lake CPU to the Intel family (bsc#1012628). - objtool: Don't fail the kernel build on fatal errors (bsc#1012628). - habanalabs: disable FW events on device removal (bsc#1012628). - habanalabs: fix backward compatibility of idle check (bsc#1012628). - habanalabs: zero pci counters packet before submit to FW (bsc#1012628). - drm/amd/display: Fixed corruptions on HPDRX link loss restore (bsc#1012628). - drm/amd/display: Use hardware sequencer functions for PG control (bsc#1012628). - drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping (bsc#1012628). - drm/amd/display: Allow PSTATE chnage when no displays are enabled (bsc#1012628). - drm/amd/display: Update dram_clock_change_latency for DCN2.1 (bsc#1012628). - selftests/powerpc: Only test lwm/stmw on big endian (bsc#1012628). - platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control (bsc#1012628). - nvmet: set right status on error in id-ns handler (bsc#1012628). - nvme-pci: allow use of cmb on v1.4 controllers (bsc#1012628). - nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout (bsc#1012628). - nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout (bsc#1012628). - nvme: check the PRINFO bit before deciding the host buffer length (bsc#1012628). - udf: fix the problem that the disc content is not displayed (bsc#1012628). - i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO (bsc#1012628). - ALSA: hda: Add Cometlake-R PCI ID (bsc#1012628). - scsi: ibmvfc: Set default timeout to avoid crash during migration (bsc#1012628). - mac80211: fix encryption key selection for 802.3 xmit (bsc#1012628). - mac80211: fix fast-rx encryption check (bsc#1012628). - mac80211: fix incorrect strlen of .write in debugfs (bsc#1012628). - objtool: Don't add empty symbols to the rbtree (bsc#1012628). - ALSA: hda: Add AlderLake-P PCI ID and HDMI codec vid (bsc#1012628). - ASoC: SOF: Intel: hda: Resume codec to do jack detection (bsc#1012628). - scsi: fnic: Fix memleak in vnic_dev_init_devcmd2 (bsc#1012628). - scsi: libfc: Avoid invoking response handler twice if ep is already completed (bsc#1012628). - scsi: scsi_transport_srp: Don't block target in failfast state (bsc#1012628). - x86: __always_inline __{rd,wr}msr() (bsc#1012628). - locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP (bsc#1012628). - habanalabs: fix dma_addr passed to dma_mmap_coherent (bsc#1012628). - platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352 (bsc#1012628). - platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet (bsc#1012628). - tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency (bsc#1012628). - tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency (bsc#1012628). - phy: cpcap-usb: Fix warning for missing regulator_disable (bsc#1012628). - iommu/vt-d: Do not use flush-queue when caching-mode is on (bsc#1012628). - ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD (bsc#1012628). - Revert "x86/setup: don't remove E820_TYPE_RAM for pfn 0" (bsc#1012628). - arm64: Do not pass tagged addresses to __is_lm_address() (bsc#1012628). - arm64: Fix kernel address detection of __is_lm_address() (bsc#1012628). - arm64: dts: meson: Describe G12b GPU as coherent (bsc#1012628). - drm/panfrost: Support cache-coherent integrations (bsc#1012628). - iommu/io-pgtable-arm: Support coherency for Mali LPAE (bsc#1012628). - ibmvnic: Ensure that CRQ entry read are correctly ordered (bsc#1012628). - net: switchdev: don't set port_obj_info->handled true when - EOPNOTSUPP (bsc#1012628). - net: dsa: bcm_sf2: put device node before return (bsc#1012628). - mlxsw: spectrum_span: Do not overwrite policer configuration (bsc#1012628). - stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing (bsc#1012628). - net: octeontx2: Make sure the buffer is 128 byte aligned (bsc#1012628). - net: fec: put child node on error path (bsc#1012628). - net: stmmac: dwmac-intel-plat: remove config data on error (bsc#1012628). - net: dsa: microchip: Adjust reset release timing to match reference reset circuit (bsc#1012628). - commit 0a69f62 - Update patches.kernel.org/5.10.13-143-vsock-fix-the-race-conditions-in-multi-trans… (bsc#1012628 bsc#1181806). Add bsc reference. - commit 64ec974 - net/mlx5: Fix function calculation for page trees (git-fixes). - commit e976b88 - Linux 5.10.13 (bsc#1012628). - iwlwifi: provide gso_type to GSO packets (bsc#1012628). - nbd: freeze the queue while we're adding connections (bsc#1012628). - tty: avoid using vfs_iocb_iter_write() for redirected console writes (bsc#1012628). - ACPI: sysfs: Prefer "compatible" modalias (bsc#1012628). - ACPI: thermal: Do not call acpi_thermal_check() directly (bsc#1012628). - kernel: kexec: remove the lock operation of system_transition_mutex (bsc#1012628). - ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256 (bsc#1012628). - parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES (bsc#1012628). - media: cec: add stm32 driver (bsc#1012628). - media: cedrus: Fix H264 decoding (bsc#1012628). - media: hantro: Fix reset_raw_fmt initialization (bsc#1012628). - media: rc: fix timeout handling after switch to microsecond durations (bsc#1012628). - media: rc: ite-cir: fix min_timeout calculation (bsc#1012628). - media: rc: ensure that uevent can be read directly after rc device register (bsc#1012628). - ARM: dts: tbs2910: rename MMC node aliases (bsc#1012628). - ARM: dts: ux500: Reserve memory carveouts (bsc#1012628). - ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming (bsc#1012628). - wext: fix NULL-ptr-dereference with cfg80211's lack of commit() (bsc#1012628). - x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled (bsc#1012628). - ASoC: AMD Renoir - refine DMI entries for some Lenovo products (bsc#1012628). - Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)" (bsc#1012628). - drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors (bsc#1012628). - drm/i915: Always flush the active worker before returning from the wait (bsc#1012628). - drm/i915/gt: Always try to reserve GGTT address 0x0 (bsc#1012628). - drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes (bsc#1012628). - bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES (bsc#1012628). - net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family (bsc#1012628). - s390: uv: Fix sysfs max number of VCPUs reporting (bsc#1012628). - s390/vfio-ap: No need to disable IRQ after queue reset (bsc#1012628). - PM: hibernate: flush swap writer after marking (bsc#1012628). - x86/entry: Emit a symbol for register restoring thunk (bsc#1012628). - efi/apple-properties: Reinstate support for boolean properties (bsc#1012628). - crypto: marvel/cesa - Fix tdma descriptor on 64-bit (bsc#1012628). - drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs (bsc#1012628). - drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[] (bsc#1012628). - btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch (bsc#1012628). - btrfs: fix possible free space tree corruption with online conversion (bsc#1012628). - KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[] (bsc#1012628). - KVM: x86/pmu: Fix UBSAN shift-out-of-bounds warning in intel_pmu_refresh() (bsc#1012628). - KVM: arm64: Filter out v8.1+ events on v8.0 HW (bsc#1012628). - KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit (bsc#1012628). - KVM: x86: allow KVM_REQ_GET_NESTED_STATE_PAGES outside guest mode for VMX (bsc#1012628). - KVM: nVMX: Sync unsync'd vmcs02 state to vmcs12 on migration (bsc#1012628). - KVM: x86: get smi pending status correctly (bsc#1012628). - KVM: Forbid the use of tagged userspace addresses for memslots (bsc#1012628). - io_uring: fix wqe->lock/completion_lock deadlock (bsc#1012628). - xen: Fix XenStore initialisation for XS_LOCAL (bsc#1012628). - leds: trigger: fix potential deadlock with libata (bsc#1012628). - arm64: dts: broadcom: Fix USB DMA address translation for Stingray (bsc#1012628). - mt7601u: fix kernel crash unplugging the device (bsc#1012628). - mt76: mt7663s: fix rx buffer refcounting (bsc#1012628). - mt7601u: fix rx buffer refcounting (bsc#1012628). - iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit (bsc#1012628). - drm/i915/gt: Clear CACHE_MODE prior to clearing residuals (bsc#1012628). - drm/i915/pmu: Don't grab wakeref when enabling events (bsc#1012628). - net/mlx5e: Fix IPSEC stats (bsc#1012628). - ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight (bsc#1012628). - drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices (bsc#1012628). - drm/vc4: Correct lbm size and calculation (bsc#1012628). - drm/vc4: Correct POS1_SCL for hvs5 (bsc#1012628). - drm/i915: Check for all subplatform bits (bsc#1012628). - drm/i915/selftest: Fix potential memory leak (bsc#1012628). - uapi: fix big endian definition of ipv6_rpl_sr_hdr (bsc#1012628). - KVM: Documentation: Fix spec for KVM_CAP_ENABLE_CAP_VM (bsc#1012628). - tee: optee: replace might_sleep with cond_resched (bsc#1012628). - xen-blkfront: allow discard-* nodes to be optional (bsc#1012628). - blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue (bsc#1012628). - clk: imx: fix Kconfig warning for i.MX SCU clk (bsc#1012628). - clk: mmp2: fix build without CONFIG_PM (bsc#1012628). - clk: qcom: gcc-sm250: Use floor ops for sdcc clks (bsc#1012628). - ARM: imx: build suspend-imx6.S with arm instruction set (bsc#1012628). - ARM: zImage: atags_to_fdt: Fix node names on added root nodes (bsc#1012628). - netfilter: nft_dynset: add timeout extension to template (bsc#1012628). - Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion" (bsc#1012628). - Revert "block: simplify set_init_blocksize" to regain lost performance (bsc#1012628). - xfrm: Fix oops in xfrm_replay_advance_bmp (bsc#1012628). - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces (bsc#1012628). - selftests: xfrm: fix test return value override issue in xfrm_policy.sh (bsc#1012628). - xfrm: Fix wraparound in xfrm_policy_addr_delta() (bsc#1012628). - arm64: dts: ls1028a: fix the offset of the reset register (bsc#1012628). - ARM: imx: fix imx8m dependencies (bsc#1012628). - ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status (bsc#1012628). - ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms (bsc#1012628). - arm64: dts: imx8mp: Correct the gpio ranges of gpio3 (bsc#1012628). - firmware: imx: select SOC_BUS to fix firmware build (bsc#1012628). - RDMA/cxgb4: Fix the reported max_recv_sge value (bsc#1012628). - ASoC: dt-bindings: lpass: Fix and common up lpass dai ids (bsc#1012628). - ASoC: qcom: Fix incorrect volatile registers (bsc#1012628). - ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY (bsc#1012628). - ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field (bsc#1012628). - spi: altera: Fix memory leak on error path (bsc#1012628). - ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete (bsc#1012628). - powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt (bsc#1012628). - pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process() (bsc#1012628). - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn (bsc#1012628). - ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies (bsc#1012628). - ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup (bsc#1012628). - iwlwifi: pcie: avoid potential PNVM leaks (bsc#1012628). - iwlwifi: pnvm: don't skip everything when not reloading (bsc#1012628). - iwlwifi: pnvm: don't try to load after failures (bsc#1012628). - iwlwifi: pcie: set LTR on more devices (bsc#1012628). - iwlwifi: pcie: use jiffies for memory read spin time limit (bsc#1012628). - iwlwifi: pcie: reschedule in long-running memory reads (bsc#1012628). - mac80211: pause TX while changing interface type (bsc#1012628). - ice: fix FDir IPv6 flexbyte (bsc#1012628). - ice: Implement flow for IPv6 next header (extension header) (bsc#1012628). - ice: update dev_addr in ice_set_mac_address even if HW filter exists (bsc#1012628). - ice: Don't allow more channels than LAN MSI-X available (bsc#1012628). - ice: Fix MSI-X vector fallback logic (bsc#1012628). - i40e: acquire VSI pointer only after VF is initialized (bsc#1012628). - igc: fix link speed advertising (bsc#1012628). - net/mlx5: Fix memory leak on flow table creation error flow (bsc#1012628). - net/mlx5e: E-switch, Fix rate calculation for overflow (bsc#1012628). - net/mlx5e: free page before return (bsc#1012628). - net/mlx5e: Reduce tc unsupported key print level (bsc#1012628). - net/mlx5: Maintain separate page trees for ECPF and PF functions (bsc#1012628). - net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled (bsc#1012628). - net/mlx5e: Fix CT rule + encap slow path offload and deletion (bsc#1012628). - net/mlx5e: Correctly handle changing the number of queues when the interface is down (bsc#1012628). - net/mlx5e: Revert parameters on errors when changing trust state without reset (bsc#1012628). - net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset (bsc#1012628). - net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable (bsc#1012628). - can: dev: prevent potential information leak in can_fill_info() (bsc#1012628). - ACPI/IORT: Do not blindly trust DMA masks from firmware (bsc#1012628). - of/device: Update dma_range_map only when dev has valid dma-ranges (bsc#1012628). - iommu/amd: Use IVHD EFR for early initialization of IOMMU features (bsc#1012628). - iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid() (bsc#1012628). - nvme-multipath: Early exit if no path is available (bsc#1012628). - selftests: forwarding: Specify interface when invoking mausezahn (bsc#1012628). - rxrpc: Fix memory leak in rxrpc_lookup_local (bsc#1012628). - NFC: fix resource leak when target index is invalid (bsc#1012628). - NFC: fix possible resource leak (bsc#1012628). - ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default (bsc#1012628). - ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default (bsc#1012628). - ASoC: topology: Properly unregister DAI on removal (bsc#1012628). - ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values() (bsc#1012628). - scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit (bsc#1012628). - team: protect features update by RCU to avoid deadlock (bsc#1012628). - tcp: make TCP_USER_TIMEOUT accurate for zero window probes (bsc#1012628). - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN (bsc#1012628). - vsock: fix the race conditions in multi-transport support (bsc#1012628). - Update patches.suse/acpi_thermal_passive_blacklist.patch (bsc#333043). - commit 3527948 ==== libevent ==== - Drop insserv_prereq and fillup_prereq macros: there are no pre-scripts that would justify these dependencies. ==== libqt5-qtbase ==== Subpackages: libQt5Concurrent5 libQt5Core5 libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5OpenGL5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-sqlite libQt5Test5 libQt5Widgets5 libQt5Xml5 libqt5-qtbase-platformtheme-gtk3 - Add patch to fix build with GCC 11 (boo#1181861, QTBUG-90395): * 0001-Fix-build-with-GCC-11-include-limits.patch * 0002-Build-fixes-for-GCC-11.patch ==== libreoffice ==== Version update (7.0.4.2 -> 7.1.0.3) Subpackages: libreoffice-base libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit - Update to 7.1.0.3 * RC3 7.1 series - Update bundled dependencies - New patch use-comphelper.patch to fix build - Rebased patch bsc1177955.diff - Dropped merged patches: * 0001-Upgrade-liborcus-to-0.16.0.patch * bsc1178944.diff * bsc1178943.diff * bsc1178807.diff * bsc1179025.diff ==== libselinux ==== Subpackages: libselinux1 libselinux1-32bit selinux-tools - Add Recommends: selinux-autorelabel, which is very important for healthy use of the SELinux on the system (/.autorelabel mechanism) (bsc#1181837). ==== libshout ==== Version update (2.4.4 -> 2.4.5) - update to 2.4.5: * Improved shout.h for reading, and understanding. * Marked dumpfile support as obsolete (as SHOUT_PROTOCOL_XAUDIOCAST already is). * Added Support for setting the content language. * Avoid the use of obsolete functions (#2317). * Several small fixes for non-blocking mode (#2321, #2315). * Corrected detection of libogg (mostly for windows targets). * Now accept TLS mode "auto" when build without TLS support. * Added new tool shout(1). ==== libwebp ==== Version update (1.1.0 -> 1.2.0) Subpackages: libwebp7 libwebpdemux2 libwebpmux3 - update to 1.2.0: * API changes in libwebp: encode.h: add a qmin / qmax range for quality factor (cwebp adds -qrange) * lossless encoder improvements * SIMD support for Wasm builds * import fuzzers from oss-fuzz & chromium * webpmux: add a '-set loop <value>' option ==== lightdm ==== Subpackages: liblightdm-gobject-1-0 lightdm-lang - Add lightdm-glibc-2.33-fix.patch that fixes issue with glibc 2.33 (boo#1181778). The patch was suggested as gh#168. ==== logrotate ==== Version update (3.17.0 -> 3.18.0) - Update to 3.18.0: * Allow UIDs and GIDs to be specified numerically * Add support for Zstandard compressed files * Make delaycompress not to fail with rotate 0 ==== nghttp2 ==== Version update (1.42.0 -> 1.43.0) - update to 1.43.0: * doc: Make doc generation work with sphinx v3.3 * python: Require python3 for python bindings * python: Require python3 for python scripts * nghttpx: Make sure that Pool gets cleared when all buffers are returned * nghttpx: Choose ECDSA cert if compatible signature algorithm available * nghttpx: Add workaround to include ':' in backend pattern ==== nodejs-common ==== - set nodejs14 as default for sle15-sp3+ - set nodejs15 as default for TW ==== openssh ==== Subpackages: openssh-clients openssh-common openssh-server - Add openssh-whitelist-syscalls.patch (bsc#1182232), fixing failure to accept connections on 32-bit platforms with glibc 2.33+. ==== php7 ==== Version update (7.4.14 -> 7.4.15) Subpackages: php7-cli php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-openssl php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter - updated to 7.4.15: This is a security release which also contains several bug fixes. See https://www.php.net/ChangeLog-7.php#7.4.15 - suppress warning for all flavors not equal to "" in multibuild % php7.rpmlintrc - add versioning to php-sapi as well - require this PHP version of subpackages in Recommends/Suggests - run apache-rex tests in php7:test as packages need to be build first (otherwise tests run with previous version) - add php_cfgdir and php_extdir macros ==== pigz ==== Version update (2.4 -> 2.6) - update to 2.6: * Add --huffman/-H and --rle/U strategy options * Fix issue when compiling for no threads * Fail silently on a broken pipe * Add --alias/-A option to set .zip name for stdin input * Add --comment/-C option to add comment in .gz or .zip * Several bug and behavior fixes - drop fortify.patch: obsolete ==== pinentry ==== Subpackages: pinentry-gnome3 pinentry-gtk2 pinentry-qt5 - add _multibuild to separate out gui client builds ==== postfix ==== Version update (3.5.8 -> 3.5.9) Subpackages: postfix-doc - (bsc#1180473) [Build 20201230] postfix has invalid default config (bsc#1181381) [Build 130.3] openQA test fails in mta, mutt - postfix broken: "queue file write error" and "error: unsupported dictionary type: hash" Export DEF_DB_TYPE before starting the perl script. - bsc#1180473 - [Build 20201230] postfix has invalid default config Fixing config.postfix and sysconfig.postfix - Update to 3.5.9 * improves the reporting of DNSSEC problems that may affect DANE security - Only do the conversion from the hash/btree databases to lmdb when the default database type changes from hash to lmdb and do not stop and start the service (the old compiled databases can live together with the new ones) - convert-bdb-to-lmdb.sh - Clean up the specfile * Remove < 1330 conditional builds * Use generated postfix-files instead of the obsolete one from postfix-SUSE.tar.gz * Use dynamicmaps.cf.d instead of modifying dynamicmaps.cf upon (de)installation of optional mysql, pgsql and ldap subpackages * Use default location for post-install, postfix-tls-script, postfix-wrapper and postmulti-script - Set lmdb to be the default db. - Convert btree tables to lmdb too. Stop postfix before converting from bdb to lmdb - This package is without bdb support. That's why convert must be done without any suse release condition. o remove patch postfix-no-btree.patch o add set-default-db-type.patch - Set database type for address_verify_map and postscreen_cache_map to lmdb (btree requires Berkeley DB) o add postfix-no-btree.patch - Set default database type to lmdb and fix update_postmaps script - Use variable substition instead of sed to remove .db suffix and substitute hash: for lmdb: in /etc/postfix/master.cf as well. Check before substitution if there is something to do (to keep rpmcheck happy). - bsc#1176650 L3: What is regularly triggering the "fillup" command and changing modify-time of /etc/sysconfig/postfix? o Remove miss placed fillup_only call from %verifyscript - Remove Berkeley DB dependency (JIRA#SLE-12191) The pacakges postfix is build without Berkely DB support. lmdb will be used instead of BDB. The pacakges postfix-bdb is build with Berkely DB support. o add patch for main.cf for postfix-bdb package postfix-bdb-main.cf.patch ==== python-pybind11 ==== Version update (2.5.0 -> 2.6.2) - Add docs/changelog.rst to package contents - Update to v2.6.2 * See changelog for changes since 2.5.0 ==== python-requests ==== - Don't pin idna<3 in the egg-info so that depending packages can install the new idna dropping python2 ==== qemu ==== Subpackages: qemu-ipxe qemu-microvm qemu-seabios qemu-sgabios qemu-skiboot qemu-vgabios - Switch the modules qemu-ui-display-gpu and qemu-ui-display-gpu-pci from being an x86 only Recommends, to a Recommends for all arch's except s390x (boo#1181350) - Fix qemu-hw-usb-smartcard to not be a Recommends for s390x - Minor spec file tweaks for compatibility with upcoming spec file formatter - Make note that this patch takes care of an OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933) hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch - Include upstream patches designated as stable material and reviewed for applicability to include here block-Separate-blk_is_writable-and-blk_s.patch hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch hw-net-lan9118-Fix-RX-Status-FIFO-PEEK-v.patch hw-timer-slavio_timer-Allow-64-bit-acces.patch net-Fix-handling-of-id-in-netdev_add-and.patch target-arm-Don-t-decode-insns-in-the-XSc.patch target-arm-Fix-MTE0_ACTIVE.patch target-arm-Introduce-PREDDESC-field-defi.patch target-arm-Update-PFIRST-PNEXT-for-pred_.patch target-arm-Update-REV-PUNPK-for-pred_des.patch target-arm-Update-ZIP-UZP-TRN-for-pred_d.patch tcg-Use-memset-for-large-vector-byte-rep.patch ui-vnc-Add-missing-lock-for-send_color_m.patch virtio-move-use-disabled-flag-property-t.patch - binutils v2.36 has changed the handling of the assembler's - mx86-used-note, resulting in a build failure. To compensate, we now explicitly specify -mx86-used-note=no in the seabios Makefile (boo#1181775) build-be-explicit-about-mx86-used-note-n.patch ==== re2 ==== Version update (20201101 -> 20210202) - Update to version 2021-02-02: * Address `-Wnull-dereference' warnings from GCC 10.x. ==== rubygem-i18n ==== Version update (1.8.7 -> 1.8.8) Subpackages: ruby2.7-rubygem-i18n ruby3.0-rubygem-i18n - updated to version 1.8.8 * Fixed threadsafety issues in Simple backend: #554 * Re-attempt to fix threadsafety of fallbacks: #548 * Use OpenSSL::Digest instead of usual Digest libraries: #549 * Goodbye, post-install message #552 * Use Rails' main branch, instead of master #553 ==== rubygem-rspec-mocks ==== Version update (3.10.1 -> 3.10.2) - updated to version 3.10.2 [#]## 3.10.2 / 2021-01-27 [Full Changelog](http://github.com/rspec/rspec-mocks/compare/v3.10.1...v3.10.2) Bug Fixes: * Support keyword arguments with `and_call_original` on Ruby 3.0. (Bryan Powell, #1385) * `RSpec::Mocks::Constant#previously_defined?` is now always a boolean. (Phil Pirozhkov, #1397) * Support keyword arguments on Ruby 3.0 when used with `expect_any_instance_of` or `allow_any_instance_of` with `and_call_original`. (Jess Hottenstein, #1407) ==== rubygem-rspec-support ==== Version update (3.10.1 -> 3.10.2) - updated to version 3.10.2 [#]## 3.10.2 / 2021-01-28 [Full Changelog](http://github.com/rspec/rspec-support/compare/v3.10.1...v3.10.2) Bug Fixes: * Fix issue with `RSpec::Support.define_optimized_require_for_rspec` on JRuby 9.1.17.0 (Jon Rowe, #492) ==== thai-fonts ==== - Utilize modern rpm macros. Nudge the description a bit. - Update description. ==== unixODBC ==== - Fix incorrect permission for documentation files. Using %attr affects the documentation subdirectory permission. Instead, the executable bit for doc files will be removed in the %prep section. ==== v4l2loopback ==== Subpackages: v4l2loopback-autoload v4l2loopback-kmp-default v4l2loopback-utils - Add undefined macros when building on older distributions ==== virtualbox ==== Subpackages: virtualbox-guest-tools virtualbox-guest-x11 - Fix build for Leap 15.3. File "fixes_for_leap15.3.patch" is added. ==== virtualbox-kmp ==== Version update (6.1.18_k5.10.12_1 -> 6.1.18_k5.10.14_1) - Fix build for Leap 15.3. File "fixes_for_leap15.3.patch" is added. ==== wpa_supplicant ==== Subpackages: wpa_supplicant-gui - Add CVE-2021-0326.patch -- P2P group information processing vulnerability (bsc#1181777) ==== yast2-trans ==== Version update (84.87.20210130.332fb904b7 -> 84.87.20210205.68980f3ed7) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20210205.68980f3ed7: * New POT for text domain 'qt-pkg'. * New POT for text domain 'qt'. * New POT for text domain 'ncurses-pkg'. * New POT for text domain 'wol'. * New POT for text domain 'vpn'. * New POT for text domain 'users'. * New POT for text domain 'update'. * New POT for text domain 'tune'. * New POT for text domain 'sysconfig'. * New POT for text domain 'support'. * New POT for text domain 'sudo'. * New POT for text domain 'storage'. * New POT for text domain 'squid'. * New POT for text domain 'sound'. * New POT for text domain 'snapper'. * New POT for text domain 'slp-server'. * New POT for text domain 'services-manager'. * New POT for text domain 'security'. * New POT for text domain 'scanner'. * New POT for text domain 'samba-server'. * New POT for text domain 'samba-client'. * New POT for text domain 's390'. * New POT for text domain 'rmt'. * New POT for text domain 'relocation-server'. * New POT for text domain 'reipl'. * New POT for text domain 'registration'. * New POT for text domain 'rdp'. * New POT for text domain 'proxy'. * New POT for text domain 'printer'. * New POT for text domain 'pam'. * New POT for text domain 'packager'. * New POT for text domain 'online-update'. * New POT for text domain 'ntp-client'. * New POT for text domain 'nis_server'. * New POT for text domain 'nis'. * New POT for text domain 'nfs_server'. * New POT for text domain 'nfs'. * New POT for text domain 'network'. * New POT for text domain 'multipath'. * New POT for text domain 'migration'. * New POT for text domain 'mail'. * New POT for text domain 'ldap-client'. * New POT for text domain 'ldap'. * New POT for text domain 'kdump'. * New POT for text domain 'journalctl'. * New POT for text domain 'isns'. * New POT for text domain 'iscsi-lio-server'. * New POT for text domain 'iscsi-client'. * New POT for text domain 'iplb'. * New POT for text domain 'instserver'. * New POT for text domain 'installation'. * New POT for text domain 'http-server'. * New POT for text domain 'geo-cluster'. * New POT for text domain 'ftp-server'. * New POT for text domain 'firewall'. * New POT for text domain 'fcoe-client'. * New POT for text domain 'drbd'. * New POT for text domain 'dns-server'. * New POT for text domain 'dhcp-server'. * New POT for text domain 'crowbar'. * New POT for text domain 'country'. * New POT for text domain 'control'. * New POT for text domain 'cluster'. * New POT for text domain 'bootloader'. * New POT for text domain 'base'. * New POT for text domain 'autoinst'. * New POT for text domain 'auth-client'. * New POT for text domain 'audit-laf'. * New POT for text domain 'apparmor'. * New POT for text domain 'add-on'. * Add empty po files for cc and cc-control * product-check.sh: Add support for 000product and inherited products * DOMAIN_MAP: Add system-role-common-criteria * Automatic update of wol. * Automatic update of vpn. * Automatic update of users. * Automatic update of update. * Automatic update of tune. * Automatic update of s390. * Automatic update of sysconfig. * Automatic update of support. * Automatic update of sudo. * Automatic update of storage. * Automatic update of squid. * Automatic update of sound. * Automatic update of snapper. * Automatic update of slp-server. * Automatic update of services-manager. * Automatic update of security. * Automatic update of scanner. * Automatic update of samba-server. * Automatic update of samba-client. * Automatic update of rmt. * Automatic update of relocation-server. * Automatic update of reipl. * Automatic update of registration. * Automatic update of rdp. * Automatic update of proxy. * Automatic update of printer. * Automatic update of pam. * Automatic update of packager. * Automatic update of online-update. * Automatic update of ntp-client. * Automatic update of nis_server. * Automatic update of nis. * Automatic update of nfs_server. * Automatic update of nfs. * Automatic update of network. * Automatic update of multipath. * Automatic update of migration. * Automatic update of mail. * Automatic update of ldap-client. * Automatic update of ldap. * Automatic update of kdump. * Automatic update of journalctl. * Automatic update of isns. * Automatic update of iscsi-lio-server. * Automatic update of iscsi-client. * Automatic update of iplb. * Automatic update of instserver. * Automatic update of installation. * Automatic update of http-server. * Automatic update of geo-cluster. * Automatic update of ftp-server. * Automatic update of firewall. * Automatic update of fcoe-client. * Automatic update of drbd. * Automatic update of dns-server. * Automatic update of dhcp-server. * Automatic update of crowbar. * Automatic update of country. * Automatic update of control. * Automatic update of cluster. * Automatic update of bootloader. * Automatic update of base. * Automatic update of autoinst. * Automatic update of auth-client. * Automatic update of audit-laf. * Automatic update of apparmor. * Automatic update of add-on. * New POT for text domain 'ncurses'. * New POT for text domain 'autoinst'.

8 8

YaST: Echoes of Hack Week 20
by Imobach Gonzalez Sosa 31 Mar '21

31 Mar '21

Hi all, Now that Hack Week 20 is over, the YaST team wants to share the projects they were working on. It covers a wide range of topics: Sorbet, gfxboot2, QDirStat, WebAssembly, a new configuration management tool (UCMT), Yast::Rake improvements... and even horses GPS tracking! If you are interested, please, have a look at https://yast.opensuse.org/blog/ 2021-03-30/hack-week-20 Regards, Imo -- Imobach González Sosa YaST Team at SUSE LLC https://imobachgs.github.io/

1 0

snapshot 20210320: upgrade of perl (5.32.0 -> 5.32.1) creates some requirement issues
by Hans-Peter Jansen 31 Mar '21

31 Mar '21

Hi, attempting to upgrade perl (5.32.0 -> 5.32.1) from the current TW snapshot 20210320 creates some requirement issues: 3 Problems: Problem: dh-autoreconf-19-1.1.noarch requires perl = 5.32.0, but this requirement cannot be provided Problem: perl-5.32.0-2.3.x86_64 requires perl-base = 5.32.0, but this requirement cannot be provided Problem: alien-8.88-4.10.x86_64 requires perl = 5.32.0, but this requirement cannot be provided Problem: dh-autoreconf-19-1.1.noarch requires perl = 5.32.0, but this requirement cannot be provided deleted providers: perl-5.32.0-2.3.x86_64 Solution 1: Following actions will be done: keep obsolete debhelper-13.3.4-1.1.noarch keep obsolete perl-5.32.0-2.3.x86_64 Solution 2: deinstallation of debhelper-13.3.4-1.1.noarch Solution 3: break dh-autoreconf-19-1.1.noarch by ignoring some of its dependencies I guess, those (and all other perl packages, that depend on perl = 5.32.0) need a rebuild rather soonish. boo#1183854 Cheers, Pete

5 4

New Tumbleweed snapshot 20210329 released!
by Dominique Leuenberger 30 Mar '21

30 Mar '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: babl (0.1.84 -> 0.1.86) bcm20702a1-firmware crash exo (4.16.0 -> 4.16.1) fprintd inxi (3.1.00 -> 3.3.03) libcontainers-common libressl (3.2.4 -> 3.2.5) mdadm mpg123 (1.26.4 -> 1.26.5) parted python-aiosmtpd (1.2.1 -> 1.4.2) python-kiwi (9.23.20 -> 9.23.22) python-mailman (3.3.3 -> 3.3.4) selinux-policy (20210223 -> 20210309) technisat-usb2-firmware transactional-update (3.2.2 -> 3.3.0) yast2-installation (4.3.31 -> 4.3.35) yast2-packager (4.3.14 -> 4.3.20) yast2-security (4.3.15 -> 4.3.16) zd1211-firmware === Details === ==== babl ==== Version update (0.1.84 -> 0.1.86) - update to 0.1.86: * input-class (scanner/RGB) ICC profiles are valid for creating RGB spaces. * improved thread safety for babl_space_from_icc * build: allow using babl a subproject in other meson projects. ==== bcm20702a1-firmware ==== - Fix build on Leap which does not have %_firmwaredir ==== crash ==== - Install and ship the small built-in extensions snap.so, trace.so, and dminfo.so. "trace.so" is particularly useful. Ship them in the main "crash" package, as they are small. ==== exo ==== Version update (4.16.0 -> 4.16.1) Subpackages: exo-data exo-lang exo-tools libexo-2-0 - Update to version 4.16.1 * Revamp the documentation to modernize and uniformize accross components * Fix keyboard navigation when only one item is present (gxo#xfce/exo#53) ==== fprintd ==== Subpackages: fprintd-lang fprintd-pam fprintd-pam-32bit - fix pyton dbus-python build dependency for Leap 15.3 boo#1183818 ==== inxi ==== Version update (3.1.00 -> 3.3.03) - Updated to version 3.3.03: * See /usr/share/doc/packages/inxi/inxi.changelog. ==== libcontainers-common ==== - Reintroduce SLE specific mounts config, to avoid errors on non-SLE systems ==== libressl ==== Version update (3.2.4 -> 3.2.5) Subpackages: libcrypto46 libssl48 libtls20 - Update to release 3.2.5 * A TLS client using session resumption may have caused a use-after-free. ==== mdadm ==== - cluster-md/mdadm : avoid useless re-sync (bsc#1181341) 0114-super1-fix-Floating-point-exception.patch 0115-super1.c-avoid-useless-sync-when-bitmap-switches-fro.patch ==== mpg123 ==== Version update (1.26.4 -> 1.26.5) Subpackages: libmpg123-0 mpg123-openal - Update to version 1.26.5 * Add ./configure --enable-xdebug (for the resampler issue). * Avoid denormals in the resampler by adding an alternating offset (helps performance without -ffast-math, depending on platform). libmpg123: * Fix ID3v2 APIC parsing when frame length bit is set (bug 306). * Also handle the group flag (skip the group byte). * Also fix up frame flag handling for ID3v2.3. Did not crop up yet, but it was just wrong. Impact was not detecting and bailing out on compressed or encrypted frames properly. ==== parted ==== Subpackages: libparted0 parted-lang - Direct file system manipulation support was removed in 2011. - Removed build dependencies on libreiserfs-devel and e2fsprogs-devel. ==== python-aiosmtpd ==== Version update (1.2.1 -> 1.4.2) - update to 1.4.2 - dropped obsolete f414dcdc.patch ==== python-kiwi ==== Version update (9.23.20 -> 9.23.22) - Bump version: 9.23.21 ? 9.23.22 - Refactor building of root cmdline setting Creating the root= cmdline parameter was based on methods that deals with the uuid. However, it's also possible to use a label information for the root= cmdline. To support this kiwi issued a 'blkid --uuid' command but that requires udev device names to be present on the host. The open buildservice workers do not run udev and fails apart the standard. This commit refactors the root cmdline setup to work with the device node as it exists during build time such that the blkid call runs against that device node. - Bump version: 9.23.20 ? 9.23.21 - Delete yum from packagemanager in schema Auto convert yum to dnf if set as packagemanager. This allows to delete the yum handling from code parts in kiwi where this was still present. In addition this fixes the inclusion of yum into the packagelist. This Fixes #1768 - Add Strong Typing to builder APIs - This PR add APIs Strong Typing to the repository APIs Strong Typing has been added to the following files: repository/base.py repository/pacman.py repository/apt.py repository/dnf.py repository/template/apt.py repository/zypper.py - Drop by-path devicepersistency setting The dev/disk/by-path device representation is a host specific PCI location. For image building which happens disconnected from the later target device this setting is useless. This Fixes #1747 - Fixed LVM root volume inclusion in fstab The root(/) volume in a LVM setup was included as UUID device path. This is inconsistent compared to the non root volumes which are included by their LVM representation: /dev/VGROUP_NAME/VOLUME_NAME This commit makes sure the root volume is included by its persistent LVM device representation too. This is related to Issue #1747 - Update unit- integration tests to schema v74 - Added XSLT transformation schema v73 -> v74 Update schema version and change to package manager 'apt' if 'apt-get' was set - Change packagemanager setting from apt-get to apt In kiwi we use the name of the section as package name to install this package manager capability. However on Debian based distros there is no package named apt-get. There is only a package named apt which provides a tool named apt-get. To avoid inconsistencies like we had it in Issue #1735 and to bring this setting in line with all other packagemanager settings the setting was moved to just apt. This Fixes #1738 - Public API Strong Typing for kiwi package_manager - Require qemu-img in any filesystem based image This commit moves the qemu-img requirement into the `kiwi-systemdeps-filesystems` to ensure ISO, OEM and PXE images include it in the build service. Also this is required for images that are simple root-trees in a filesystem (image=ext4). - Add a requirement for kiwi-systemdeps-iso-media on disk images This commit adds a requirement for `kiwi-systemdeps-iso-media` in `kiwi-systemdeps-disk-images`. This is to ensure that installing `kiwi-systemdeps-disk-images` is enough to build OEM images including install media. - Exclude /run and /tmp to be synched into the image This commit makes sure the contents of /run and /tmp are ignored when synchronizing the generated root tree into the image. Fixes #1744 - Fix use of by-label device persistency in grub If devicepersistency="by-label" is set in the KIWI description it will correctly operate on the fstab values but still uses the UUID based setting for root= in the grub config. This commit allows to set root=LABEL=... in the grub config in case the devicepersistency requested it. In order for this to work this commit also had to increase the scope of the grub helper method _fix_grub_root_device_reference which is now called in any case. This Fixes #1757 ==== python-mailman ==== Version update (3.3.3 -> 3.3.4) - dropped obsolete gl823_exclude_failing_tests.patch - Update to 3.3.4 * Bugs * Require aiosmtpd >= 1.4.1 to allow address local parts longer than 64 bytes in the lmtp runner. (Closes #836) * The email join command now honors the digest=<no|mime|plain> option. (Closes #19) * Folded ``Message-ID`` headers no longer cause folded smtp.log messages. (Closes #844) * Removal of headers from posts to anonymous lists that can reveal the poster or the poster's domain has been improved. (Closes #848) * Command line * The ``notify`` subcommand will now decode an RFC 2047 encoded Subject: for the report of held messages. (Closes #831) * The deprecated options ``--add``, ``--del`` and ``--sync`` are now disabled on the ``mailman members`` command. * REST * Improve the speed of Members lookup via REST API. (Related to #700) * Allow specifying ``delivery_mode`` and ``delivery_status`` when creating a new Member. (Closes #828) * Allow filtering members in ``/members/find`` API using ``delivery_status``, ``delivery_mode`` and ``moderation_action``. (See #827) * New Features * There is a new setting ``filter_report`` in the ``[mailman]`` section of mailman.cfg. If this is set to ``yes``, a report of changes by content filtering will be added to the outgoing message. (Closes #833) * There is a new setting ``check_max_size_on_filtered_message`` in the ``[mailman]`` section of mailman.cfg. If this is set to ``yes`` and the list does content filtering, the ``max_message_size`` hold will be based on the size of the content filtered message. (Closes #377) * There is a new setting ``anonymous_list_keep_headers`` in the ``[mailman]`` section of mailman.cfg. This is part of improved removal of headers from posts to anonymous lists. This setting is a space separated list of regexp patterns. After anonomyzing removes the headers which are known to reveal the poster or poster's domain, it then removes all headers whose names do not match (case-insensitively) one of these patterns. The default setting keeps non X- headers, those X- headers added by Mailman and any X-Spam- headers. ==== selinux-policy ==== Version update (20210223 -> 20210309) Subpackages: selinux-policy-targeted - Adjust fix_init.patch to allow systemd to do sd-listen on tcp socket [bsc#1183177] - Update to version 20210309 - Refreshed * fix_systemd.patch * fix_selinuxutil.patch * fix_iptables.patch * fix_init.patch * fix_logging.patch * fix_nscd.patch * fix_hadoop.patch * fix_unconfineduser.patch * fix_chronyd.patch * fix_networkmanager.patch * fix_cron.patch * fix_usermanage.patch * fix_unprivuser.patch * fix_rpm.patch - Ensure that /usr/etc is labeled according to /etc rules ==== technisat-usb2-firmware ==== - Fix build on Leap which does not have %_firmwaredir ==== transactional-update ==== Version update (3.2.2 -> 3.3.0) Subpackages: dracut-transactional-update libtukit0 transactional-update-zypp-config tukit - Version 3.3.0 - Add support for more package managers by bind mounting their directories - Support snapshots without dedicated overlay [boo#1183539], [bsc#1183539] - Link RPM database correctly with older zypper versions [boo#1183521] - Don't discard manual changes in fstab [boo#1183856] ==== yast2-installation ==== Version update (4.3.31 -> 4.3.35) - Expert console: use "dash" if available instead of "bash" shell to avoid job control error messages (bsc#1183648) - 4.3.35 - Remove the libzypp cache symlink (related to bsc#1182928) - Improved "memsample" script handling - Do not start it again if it is already running (might happen if YaST is started again after crash) - Stop it when YaST finishes - 4.3.34 - Do not trigger any kernel event with udevadm from the kernel_finish client (bsc#1180535) - 4.3.33 - Reduce self-update mechanism memory consumption (bsc#1182928): - Make sure to download the package only once. - Use a single squash file system for each update repository. - Ignore unchanged files and directories like /usr/share/man, /usr/share/info, etc. - 4.3.32 ==== yast2-packager ==== Version update (4.3.14 -> 4.3.20) - Do not create zypp cache symlink when running in installed system, it would create /var/cache/zypp -> /var/cache/zypp loop (bsc#1183683) - Remove the "Software Repositories" button from the YaST console, users can easily break the installer with it. Added "configure_repositories" command to the command line interface for experts (bsc#1183687) - 4.3.20 - Move the libzypp cache to the installed system to save some memory and avoid crashing because out of memory (bsc#1182928) - 4.3.19 - Added IBM tools product rename to the list (part of bsc#1182837) - 4.3.18 - During installation, explain what "online repositories" are (bsc#1180707). - 4.3.17 - Extend the special installer configuration dialog with repository options (jsc#PM-1895, jsc#SLE-16263) - 4.3.16 - Support for configuring minimalistic DNF (bsc#1182849) contributed by Sasi Olin (hel(a)lcp.world) - 4.3.15 ==== yast2-security ==== Version update (4.3.15 -> 4.3.16) - Do not set SELinux mode when it is not configurable (bsc#1182940) - 4.3.16 ==== zd1211-firmware ==== - Fix build on Leap which does not have %_firmwaredir - use %_firmwaredir - update to version 1.5 - Sync to vendor driver v3.0.0.56 - Header files taken from LinuxUSB_AR2524-3.0.0.56.tgz - Install the COPYING file as required by the GPL. - new version 1.4 * Sync to vendor driver v2.21.0.0; According to Atheros, this firmware fixes a USB disconnect issue which most commonly appeared when running "lsusb" or "cat /proc/usb/devices" while using the device. - update modaliases - new package for version 1.3

1 0

Re: MirrorBrain?
by Bernhard M. Wiedemann 30 Mar '21

30 Mar '21

On 30/03/2021 11.08, Gerald Pfeifer wrote: > On Thu 2021-03-18, medwinz wrote: >> My logic is simple, mirrors cannot catch up with the new release if >> several major updates happen at nearly the same time. > > That, plus the timing of announcements also makes a difference. > > Not everyone here probably follows the factory@ list closely (I, > too, read project@ more regularly), so allow me to share a change > Bernhard has recently made which should also help. > > Thank you, Bernhard! For the record, here is what I found during debugging: After the previous full rebuilds, download.opensuse.org IPv6 address had ~50% packet loss for several hours. My nagios[1] has reported this at 2021-02-16 12:20 UTC (20210212 glibc rebuild published) 2021-03-08 11:25 UTC (20210307 glibc rebuild published) 2021-03-12 18:35 UTC (20210311 KDE update published) 2021-03-13 10:37 UTC (still fallout from 20210311?) 2021-03-13 18:09 UTC (still fallout from 20210311?) On the download.o.o VM, top showed ksoftirqd very busy at 98% CPU and several active rsyncd processes using the CPU. This indicates that syncing to the mirrors was still ongoing and that probably also slowed mirrorbrain mirror scans, so that more traffic was directed towards the downloadcontent.o.o site which happens to be the same machine as mirrorbrain (just another IP). All that syncing, scanning and downloading slowed each other down. Apart from the longer publish delay for large Tumbleweed snapshots, I plan to push the setup of the new widehat.o.o machine, so that it can act as a fallback mirror most of the time and relieve downloadcontent.o.o bandwidth. Ciao Bernhard M. [1] http://nagios.zq1.de/nagios4 => http://nagios.zq1.de/cgi-bin/nagios4/extinfo.cgi?type=1&host=oodownload > ==== forwarded message ==== > From: Bernhard M. Wiedemann <bernhardout(a)lsmod.de> > To: factory(a)lists.opensuse.org > Date: Sun, 28 Mar 2021 15:09:28 +0200 > Subject: factory publish delay [was New Tumbleweed snapshot 20210325] > > > 20210325 was the first large snapshot to trigger my new logic for a > longer publish delay (6h instead of 2h). > > The publisher became active when the repo age was 22203 s > and the repo rsync log had 32114 lines and 2091370 byte. > > This time, download.o.o seems to have had a much better time handling > the load than with previous full rebuilds. Though this seems to have > been only a partial rebuild because there are 62802 entries in factory/repo > > Medium-term we can do more fine-tuning to balance publish delay vs load > of download.o.o > > > Ciao > Bernhard M.

2 1