December 2020 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] package to be orphaned soon: firebird
by Michal Kubecek 06 Dec '20

06 Dec '20

Hello, the openSUSE firebird package is going to be orphaned soon and anyone willing to maintain it is welcome to take over. Short term, there shouldn't be much trouble with it, except for the fallout of what happens in openSUSE Factory project. The 3.0.7 point release is already in Factory and the next 3.0.x release is expected in about half a year. I don't expect much complications with future 3.0.x point releases. Upgrade to version 4 will be more tricky as the upstream ICU detection code has been reworked and will require some effort to adapt for openSUSE ICU packages versioning and soname tweaks. But firebird is not exactly known for rushing new versions so that there should be enough time to work this out. The background: as I learned on Wednesday, Dominique Leuenberger plans to add more checks for openSUSE Factory packages and two of them would break the build of firebird package. As he insists the build breakage must be resolved in a way I find unacceptable, I decided to step down as the package maintainer once the build is broken. I wanted to go on maintaining the package as long as possible but as Mr. Leuenberger insists that I should announce my stepping down now and he even invited another person who went as far as accusing me of "failure to conduct oneself following the norms of our communities" and "breach of SUSE's Open Source Policy", I changed my mind. I have had enough bad experiences with that person in the past and having to deal with him again is something I would be happy to avoid. Thus I'm sending this announcement now even if there is no technical reason to give up the maintainership yet. Michal Kubecek

2 2

New Package Submission: sampler
by Richard Brown 06 Dec '20

06 Dec '20

Dear openSUSE Community, I have just submitted a new package to Tumbleweed called 'sampler' The upstream website describes the project and shows examples of what it can do in some detail: https://sampler.dev/ To put it simply, it's a command-line tool written in go for creating nice simple CLI monitoring/visualization/alert dashboards. I intend to use it for an openSUSE MicroOS Raspberry Pi which will be sitting on my desk monitoring the other core nodes in my infrastructure, but I can see it being quite fun for other use cases too. Regards, -- Richard Brown Linux Distribution Engineer - Future Technology Team Phone +4991174053-361 SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, D-90409 Nuernberg (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer

3 2

New Tumbleweed snapshot 20201201 released!
by Dominique Leuenberger 04 Dec '20

04 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: fprintd (1.90.1 -> 1.90.4) libgda libmanette (0.2.4 -> 0.2.6) libyui-qt-pkg (2.48.4 -> 2.48.5) perl-Mojolicious (8.65 -> 8.66) virt-manager yast2-installation (4.3.20 -> 4.3.22) yast2-packager (4.3.10 -> 4.3.11) yast2-trans (84.87.20201122.ac554fbdd6 -> 84.87.20201130.b140fdb5f7) === Details === ==== fprintd ==== Version update (1.90.1 -> 1.90.4) Subpackages: fprintd-lang fprintd-pam fprintd-pam-32bit - Update to version 1.90.4 * Authentication is now required to enroll a new print. * Add support for the libfprint early reporting mechanism * Proper hotplug support together with libfprint 1.90.4 * Handle STATE_DIRECTORY containing multiple paths - Add patch: * 0001-tests-Fix-test-not-failing-on-error.patch https://gitlab.freedesktop.org/libfprint/fprintd/-/merge_requests/70 Unittest test_manager_get_devices_on_name_appeared is broken with this patch applied - so revert it for now. ==== libgda ==== Subpackages: libgda-5_0-4 libgda-5_0-4-lang libgda-5_0-bdb libgda-5_0-sqlite libgda-ui-5_0-4 libgda-ui-5_0-plugins - Only conditionally build with firebird support, currently disabled (boo#1179203). ==== libmanette ==== Version update (0.2.4 -> 0.2.6) - Update to version 0.2.6: + Project: - Move the project to gitlab.gnome.org/GNOME/libmanette. - Update the URLs accordingly. - Give the project a minimal website: https://gnome.pages.gitlab.gnome.org/libmanette/ - Update the project's description. + Documentation: - Add a documentation. - Fix many documentation annotations. - Document more symbols. + Meson: - Require Meson 0.53.0. - Add the demos option. - Add the build-tests and install-tests option. - Various code style cleanups and updates. - Add a build summary. + ManetteDevice: - Add a missing precondition check to ensure milliseconds is in the right range in manette_device_rumble(). - Throw the full file error code rather than G_FILE_ERROR_FAILED in manette_device_new(). - Throw G_FILE_ERROR_FAILED rather than G_FILE_ERROR_NXIO in manette_device_new() if the device isn't a gamepad. + ManetteMapping: - Check mapping strings have at least a GUID field and a name field. - Use the debug log level for non-programming mapping parsing errors. - Make some parsing error messages more explicit. + ManetteMappingManager: Use a race-free way to check the mapping file deletion. + Code cleanup: - Make license headers have the LGPL footer, not the GPL one. - Use #pragma once instead of manual header guards. - Use g_auto(), g_autoptr() and g_autofree where possible. - Use g_clear_pointer() and g_clear_object() where possible. - Use assertions instead of g_return*_if_fail in static functions. - Add HACKING.md to document the code, documentation, and commit message styles. - Give better names to callback functions. - Give the namespace_object_ prefix to the finalize functions to match the code style. - Clean up and simplify the code in many places. - Drop platform:Linux from the internal gamepad database. - Changes from version 0.2.5: + Fix the build with musl by using input_event_sec and input_event_usec. - Run tests during build, add a check section and macro. - Update URL to new home. ==== libyui-qt-pkg ==== Version update (2.48.4 -> 2.48.5) - Fix text and icon overlapping in the pattern header (boo#1176530) - Improve layout of pattern headers - 2.48.5 ==== perl-Mojolicious ==== Version update (8.65 -> 8.66) - updated to 8.66 see /usr/share/doc/packages/perl-Mojolicious/Changes 8.66 2020-11-28 - Deprecated logging to "log/$mode.log" (if a log directory exists) in Mojolicious. The default will simply be STDERR in the future. - Added support for preloading controllers and other classes during startup of Mojolicious applications. - Added EXPERIMENTAL preload_namespaces attribute to Mojolicious. - Added EXPERIMENTAL warmup method to Mojolicious. - Added EXPERIMENTAL load_classes function to Mojo::Loader. - Removed experimental status from humanize_bytes method in Mojo::ByteStream. - Removed experimental status from humanize_bytes function in Mojo::Util. - Improved find_modules function in Mojo::Loader with recursive option. - Improved Mojo::DOM::CSS to throw exceptions for unknown CSS selectors. - Fixed a bug in Mojolicious::Commands where help messages would not be displayed correctly for some commands. (kiwiroy) - Fixed a bug in Mojolicious::Routes::Pattern where type_start was treated as a regex. (Grinnz) ==== virt-manager ==== Subpackages: virt-install virt-manager-common - bsc#1179236 - L3: virt-install: "Error validating install location: invalid literal for int() with base 10" reported by virt-install ref:_00D1igLOd._5001iTe00n:ref virtinst-sap-detection.patch - boo#1178141 - Accomodate qemu modularization with respect to v5.2 qemu changes, where 3 additional modular shared objects need to be present for spice support. This change simply augments what was done before, adding the additional code to the same patch - bsc#1172340 - Several YaST modules can be started by typing "yast2 $module <tab><tab>" virt-install.rb ==== yast2-installation ==== Version update (4.3.20 -> 4.3.22) - correct add-on spelling (jsc#SLE-14772) - 4.3.22 - fix full media product selection (bsc#1179094, bsc#1176424) - 4.3.21 ==== yast2-packager ==== Version update (4.3.10 -> 4.3.11) - correct add-on spelling (jsc#SLE-14772) - 4.3.11 ==== yast2-trans ==== Version update (84.87.20201122.ac554fbdd6 -> 84.87.20201130.b140fdb5f7) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20201130.b140fdb5f7: * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * New POT for text domain 'registration'. * New POT for text domain 'packager'. * New POT for text domain 'installation'. * Translated using Weblate (Slovak) * Translated using Weblate (Czech) * Translated using Weblate (Indonesian) * New POT for text domain 'installation'. * New POT for text domain 'autoinst'. * Translated using Weblate (Slovak) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Japanese) * Translated using Weblate (Indonesian) * Translated using Weblate (Indonesian) * Translated using Weblate (Indonesian) * Translated using Weblate (Indonesian) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * New POT for text domain 'storage'. * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech)

7 11

Tumbleweed - Review of the week 2020/49
by Dominique Leuenberger / DimStar 04 Dec '20

04 Dec '20

Dear Tumbleweed users and hackers, Week 49 felt like a normal week, with no disasters happening, steady rolling distribution, openQA being on our side, blocking one snapshot that could have caused quite some pain to you, the users. So all in all, exactly what we want from a stable, rolling distribution. And this still resulted in 5 snapshots released during this week (1127, 1129, 1130, 1201, 1202). The main changes in those five snapshots included: * Mozilla Firefox 83.0 * Grep 3.6: the GREP_OPTIONS environment variable no longer affects grep’s behavior * GNOME 3.38.2 * Linux kernel 5.9.11 In the staging projects, these changes are being tested and worked on: * KDE Plasma 5.20.4 * KDE Applications 20.12 (currently RC being tested) * icu 68.1: breaks a couple of builds (Staging:I) * brp-check-suse: a bug fix in how it detected dangling symlinks (it detected them, but did not fail as it was supposed to) * permissions package: prepares for easier listing, while supporting a full /usr merge * RPM 4.16: still a few packages build failures (postgresql, Mozilla *, openblas) * Ruby 3.0: mainly YaST not ready for that switch * First experiments with rpmlint 2.0 started in Staging:M * openssl 3.0: currently alpha 9 in Staging:O Cheers, Dominique

1 0

[opensuse-factory] UsrMerge preparations
by Ludwig Nussel 04 Dec '20

04 Dec '20

Hi, Quite some packages carry around sections like this: #UsrMerge mkdir $RPM_BUILD_ROOT/sbin ln -s %_sbindir/foo $RPM_BUILD_ROOT/sbin/foo #EndUsrMerge That was added years ago as preparation of replacing /bin, /sbin, /lib and /lib64 with a symlink and merging the content into their counterparts in /usr. I'm not sure how that was supposed to work in practice though. To actually get rid of resp disable that code even for testing one would have to modify a hundred packages. So I'd like to replace those comments with a conditional, ie %if !0%{?usrmerged} mkdir %buildroot/sbin ln -s %_sbindir/foo %buildroot/sbin/foo %endif That doesn't yet answer the question when and how we finally do the /usr merge. However at least it would be possible to flip a switch via prjconf to stop building compat symlinks in a branch project then. Factory as of today would keep building the packages the way they are now, so no change in content at this point. Using the macro also paves the way to actually test a usr merged environment in staging in the future. So unless there are better ideas I'd just go ahead and adjust all packages that have those symlinks. cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.com/ SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer HRB 36809 (AG Nürnberg)

8 16

New package rshim for openSUSE:Leap:15.3
by Matthias Brugger 04 Dec '20

04 Dec '20

Hi all, I've submitted a new package to Leap 15.3 called 'rshim'. It is part of Tumbleweed for a while now. It is a commandline tool to initialize and access Mellanox/Nvidia BlueField smart NICs and data processing units. [1] I've tested the package on x86_64 and aarch64. The SR can be find here: https://build.opensuse.org/request/show/850415 Regards, Matthias [1] https://www.nvidia.com/en-us/networking/products/data-processing-unit/

3 3

Booting kernels older than v5.7
by Thomas Zimmermann 04 Dec '20

04 Dec '20

Hi, I'm on the latest TW. I'm trying to bisect for https://bugzilla.suse.com/show_bug.cgi?id=1178474 but I cannot get any kernel older than v5.7 to boot. I do the usual kernel build + modules_install + install. After GRUB, the message says "Loading kernel", then "Loading ramdisk". Then the system stops booting without further messages. Did anything related change around v5.7? Maybe the ramdisk format/compression? Best regards Thomas -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer

3 3

New Tumbleweed snapshot 20201202 released!
by Dominique Leuenberger 04 Dec '20

04 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: fcitx-qt5 (1.2.2 -> 1.2.5) gnome-tweaks hdparm libmodulemd (2.9.4 -> 2.10.0) mtools (4.0.25 -> 4.0.26) pam_mount pcsc-cyberjack perl-Types-Serialiser (1.0 -> 1.01) php7 python-atpublic (1.0 -> 2.1.1) python-scrypt (0.8.15 -> 0.8.17) zsh === Details === ==== fcitx-qt5 ==== Version update (1.2.2 -> 1.2.5) - update version 1.2.5 * many fixes are ported from fcitx5 counter part during the developement. Some fixes related to focus and relative rect to allow the correct input window positioning on gnome-shell wayland mode. - drop fix-remove-paths-warnings.patch, upstreamed ==== gnome-tweaks ==== Subpackages: gnome-tweaks-lang - Add gnome-tweaks-port-libhandy-1.patch: Port to using new handy. ==== hdparm ==== - prepare usrmerge (boo#1029961) ==== libmodulemd ==== Version update (2.9.4 -> 2.10.0) - Update to 2.10.0 + Add modulemd-obsoletes + Add modulemd v3 format - Fix build for 32-bit architectures with patch from upstream + Patch: 0001-Fix-integer-size-issue-on-32-bit-platforms.patch ==== mtools ==== Version update (4.0.25 -> 4.0.26) - mtools 4.0.26: * Ignore image file locking errors if we are performing a read- only access anyways - remove obsolete texinfo packaging macros, update signing keyring ==== pam_mount ==== Subpackages: libcryptmount0 libcryptmount0-32bit pam_mount-32bit - Restore symlinks for crypt_LUKS Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1179229 ==== pcsc-cyberjack ==== - make sure that the rule files are not marked as executable ==== perl-Types-Serialiser ==== Version update (1.0 -> 1.01) - Add license to cpanspec.yml (no license in Makefile.PL, META.(yml|json), pod and no LICENSE file) - updated to 1.01 see /usr/share/doc/packages/perl-Types-Serialiser/Changes 1.01 Tue Dec 1 02:46:33 CET 2020 - implement Types::Serialiser::as_bool. - slight doc tweaks. ==== php7 ==== Subpackages: apache2-mod_php7 php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter - fix building with new apache2 from Apache development repo ==== python-atpublic ==== Version update (1.0 -> 2.1.1) - Update to v2.1.1 * Clean up some typing problems * Reorganized docs and tests out of the code directory * Fix the Windows CI tests - from v2.0 * Drop Python 3.4 and 3.5; add Python 3.8 and 3.9. * The C implementation is removed * Added an ``@private`` decorator * Build and test on Windows in addition to Linux * Fix the doctests so that they actually run and pass! * Add type annotations and API reference documentation * Internal improvements and modernizations ==== python-scrypt ==== Version update (0.8.15 -> 0.8.17) - update to 0.8.17: * add_dll_directory for python 3.8 on windows, as importlib.util.find_spec does not search all paths anymore * Add additional test vector from RFC ==== zsh ==== - prepare usrmerge (boo#1029961)

1 0

openSUSE:Factory - Build fail notification
by DimStar / Dominique Leuenberger 03 Dec '20

03 Dec '20

Dear Package maintainers and hackers. Below package(s) in openSUSE:Factory have been failing to build for at least 4 weeks. We tried to send out notifications to the configured bugowner/maintainers of the package(s), but so far no fix has been submitted. This probably means that the maintainer/bugowner did not yet find the time to look into the matter and he/she would certainly appreciate help to get this sorted. - autofdo Unless somebody is stepping up and submitting fixes, the listed package(s) are going to be removed from openSUSE:Factory. Kind regards, DimStar / Dominique Leuenberger <dimstar(a)opensuse.org>

4 6

Results of openSUSE ARM Usecases survey
by Lubos Kocman 03 Dec '20

03 Dec '20

Ahoy openSUSE! I'd like to give big thanks to all of you who have participated in the survey, the data is pure gold. I'd also like to give thanks to openSUSE Release team who helped to make this survey happen and those of you who went with me through all of the feedback. Cumulated notes from review during past two days can be found here https://etherpad.opensuse.org/p/ReleaseEngineering-20201202-arm . I have processed the exported survey results and turned it into the following wiki page: https://en.opensuse.org/Portal:15.3/Surveys/ARM_Usecases Data showed us that there is a big ARM userbase that essentially doubled over past 12 months. There seems to be still a lot of ARMv7 devices around, and people on these devices care about Leap. Based on this feedback openSUSE Release team is now looking into ways how to bootstrap openSUSE Leap 15.3 for ARMv7. We don't want to let our users down. We will also look into what we can do about the Rasp Pi 4 issues (sound etc.). We will also see what can be done the multilib libraries. There was a also suggestion to support some newer devices or to provide images with different partition setup (no swap or avoiding separate /boot). Next step is that we will process the notes in a closer loop and will make sure to open features, bugs, poo tickets, contact right people to make sure we can be seen as one of the fine tuned distributions for all of these devices. The optional email contacts we've received as part of the survey will be kept within the openSUSE release team. I hope you we will find a great use for the data. Thank you once again. -- Lubos Kocman, Release Manager openSUSE Leap SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg - Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer

1 0

New package submission: xcape
by Vinzenz Vietzke 02 Dec '20

02 Dec '20

Hi, I'd like to submit new package xcape to Factory. It currently lives in X11:Xfce. xcape allows you to use a modifier key as another key when pressed and released on its own. The default behaviour is to generate the Escape key when Left Control is pressed and released on its own. Example: Having xcape -e 'Super_L=Alt_L|F1' set in autostart keeps it running in the background mapping Super key to Alt+F1 which is useful e.g. for opening whiskermenu in Xfce. OBS: https://build.opensuse.org/package/show/X11:xfce/xcape Upstream: https://github.com/alols/xcape I'll open the SR right away after sending this email. vinz.

1 0

[opensuse-factory] YaST: highlights of development sprint 113
by Ancor Gonzalez Sosa 02 Dec '20

02 Dec '20

Time for another development report from the YaST Team (temporarily transmuted in the YaST+Cockpit Team), including - Progress on the Cockpit modules for managing wicked and for transactional updates. - Improvements in the YaST Partitioner regarding management of Btrfs subvolumes. - Hibernation support configurable per product and system role. Check the whole report at https://yast.opensuse.org/blog/2020-11-24/sprint-113 Cheers. -- Ancor González Sosa YaST Team at SUSE Linux GmbH

2 3

New Tumbleweed snapshot 20201130 released!
by Dominique Leuenberger 01 Dec '20

01 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: dmraid kernel-source (5.9.10 -> 5.9.11) lvm2 lvm2-device-mapper php7 (7.4.12 -> 7.4.13) procmail purple-lurch python-pymongo (3.11.0 -> 3.11.1) python-pyzmq (19.0.2 -> 20.0.0) python-sortedcontainers (2.2.2 -> 2.3.0) tigervnc zeromq (4.3.2 -> 4.3.3) === Details === ==== dmraid ==== - prepare usrmerge (boo#1029961) - Remove obsolete Groups tag (fate#326485) ==== kernel-source ==== Version update (5.9.10 -> 5.9.11) Subpackages: kernel-default kernel-docs - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe (git-fixes). - commit 91426ef - Linux 5.9.11 (bsc#1012628). - ah6: fix error return code in ah6_input() (bsc#1012628). - atm: nicstar: Unmap DMA on send error (bsc#1012628). - bnxt_en: read EEPROM A2h address using page 0 (bsc#1012628). - devlink: Add missing genlmsg_cancel() in devlink_nl_sb_port_pool_fill() (bsc#1012628). - enetc: Workaround for MDIO register access issue (bsc#1012628). - Exempt multicast addresses from five-second neighbor lifetime (bsc#1012628). - inet_diag: Fix error path to cancel the meseage in inet_req_diag_fill() (bsc#1012628). - ipv6: Fix error path to cancel the meseage (bsc#1012628). - lan743x: fix issue causing intermittent kernel log warnings (bsc#1012628). - lan743x: prevent entire kernel HANG on open, for some platforms (bsc#1012628). - mlxsw: core: Use variable timeout for EMAD retries (bsc#1012628). - net: b44: fix error return code in b44_init_one() (bsc#1012628). - net: bridge: add missing counters to ndo_get_stats64 callback (bsc#1012628). - netdevsim: set .owner to THIS_MODULE (bsc#1012628). - net: dsa: mv88e6xxx: Avoid VTU corruption on 6097 (bsc#1012628). - net: ethernet: mtk-star-emac: fix error return code in mtk_star_enable() (bsc#1012628). - net: ethernet: mtk-star-emac: return ok when xmit drops (bsc#1012628). - net: ethernet: ti: am65-cpts: update ret when ptp_clock is ERROR (bsc#1012628). - net: ethernet: ti: cpsw: fix cpts irq after suspend (bsc#1012628). - net: ethernet: ti: cpsw: fix error return code in cpsw_probe() (bsc#1012628). - net: ftgmac100: Fix crash when removing driver (bsc#1012628). - net: Have netpoll bring-up DSA management interface (bsc#1012628). - net: ipa: lock when freeing transaction (bsc#1012628). - netlabel: fix our progress tracking in netlbl_unlabel_staticlist() (bsc#1012628). - netlabel: fix an uninitialized warning in netlbl_unlabel_staticlist() (bsc#1012628). - net: lantiq: Wait for the GPHY firmware to be ready (bsc#1012628). - net/mlx4_core: Fix init_hca fields offset (bsc#1012628). - net/mlx5e: Fix refcount leak on kTLS RX resync (bsc#1012628). - net/ncsi: Fix netlink registration (bsc#1012628). - net: phy: mscc: remove non-MACSec compatible phy (bsc#1012628). - net: qualcomm: rmnet: Fix incorrect receive packet handling during cleanup (bsc#1012628). - net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid() (bsc#1012628). - net: stmmac: Use rtnl_lock/unlock on netif_set_real_num_rx_queues() call (bsc#1012628). - net/tls: fix corrupted data in recvmsg (bsc#1012628). - net: x25: Increase refcnt of "struct x25_neigh" in x25_rx_call_request (bsc#1012628). - page_frag: Recover from memory pressure (bsc#1012628). - qed: fix error return code in qed_iwarp_ll2_start() (bsc#1012628). - qed: fix ILT configuration of SRC block (bsc#1012628). - qlcnic: fix error return code in qlcnic_83xx_restart_hw() (bsc#1012628). - sctp: change to hold/put transport for proto_unreach_timer (bsc#1012628). - tcp: only postpone PROBE_RTT if RTT is < current min_rtt estimate (bsc#1012628). - vsock: forward all packets to the host when no H2G is registered (bsc#1012628). - net/mlx5e: Fix check if netdev is bond slave (bsc#1012628). - net/mlx5: Add handling of port type in rule deletion (bsc#1012628). - net/mlx5: Clear bw_share upon VF disable (bsc#1012628). - net/mlx5: Disable QoS when min_rates on all VFs are zero (bsc#1012628). - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter (bsc#1012628). - net: fec: Fix reference count leak in fec series ops (bsc#1012628). - bnxt_en: Fix counter overflow logic (bsc#1012628). - bnxt_en: Free port stats during firmware reset (bsc#1012628). - net: mvneta: fix possible memory leak in mvneta_swbm_add_rx_fragment (bsc#1012628). - net/tls: Fix wrong record sn in async mode of device resync (bsc#1012628). - net: usb: qmi_wwan: Set DTR quirk for MR400 (bsc#1012628). - Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts"" (bsc#1012628). - tools, bpftool: Avoid array index warnings (bsc#1012628). - habanalabs/gaudi: mask WDT error in QMAN (bsc#1012628). - pinctrl: rockchip: enable gpio pclk for rockchip_gpio_to_irq (bsc#1012628). - scsi: ufs: Fix unbalanced scsi_block_reqs_cnt caused by ufshcd_hold() (bsc#1012628). - scsi: ufs: Try to save power mode change and UIC cmd completion timeout (bsc#1012628). - pinctrl: mcp23s08: Print error message when regmap init fails (bsc#1012628). - selftests: kvm: Fix the segment descriptor layout to match the actual layout (bsc#1012628). - ACPI: button: Add DMI quirk for Medion Akoya E2228T (bsc#1012628). - arm64: errata: Fix handling of 1418040 with late CPU onlining (bsc#1012628). - arm64: psci: Avoid printing in cpu_psci_cpu_die() (bsc#1012628). - arm64: smp: Tell RCU about CPUs that fail to come online (bsc#1012628). - um: Call pgtable_pmd_page_dtor() in __pmd_free_tlb() (bsc#1012628). - vfs: remove lockdep bogosity in __sb_start_write (bsc#1012628). - gfs2: fix possible reference leak in gfs2_check_blk_type (bsc#1012628). - hwmon: (pwm-fan) Fix RPM calculation (bsc#1012628). - gfs2: Fix case in which ail writes are done to jdata holes (bsc#1012628). - arm64: Add MIDR value for KRYO2XX gold/silver CPU cores (bsc#1012628). - arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist (bsc#1012628). - arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver (bsc#1012628). - usb: dwc2: Avoid leaving the error_debugfs label unused (bsc#1012628). - arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay (bsc#1012628). - arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay (bsc#1012628). - arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node (bsc#1012628). - arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node (bsc#1012628). - arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node (bsc#1012628). - ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node (bsc#1012628). - Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" (bsc#1012628). - ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY (bsc#1012628). - arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY (bsc#1012628). - arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY (bsc#1012628). - Input: adxl34x - clean up a data type in adxl34x_probe() (bsc#1012628). - MIPS: export has_transparent_hugepage() for modules (bsc#1012628). - dmaengine: idxd: fix wq config registers offset programming (bsc#1012628). - arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node (bsc#1012628). - arm64: dts: fsl: fix endianness issue of rcpm (bsc#1012628). - arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio (bsc#1012628). - arm64: dts imx8mn: Remove non-existent USB OTG2 (bsc#1012628). - arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy (bsc#1012628). - ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking (bsc#1012628). - ARM: dts: imx6q-prti6q: fix PHY address (bsc#1012628). - swiotlb: using SIZE_MAX needs limits.h included (bsc#1012628). - tee: amdtee: fix memory leak due to reset of global shm list (bsc#1012628). - tee: amdtee: synchronize access to shm list (bsc#1012628). - dmaengine: xilinx_dma: Fix usage of xilinx_aximcdma_tx_segment (bsc#1012628). - dmaengine: xilinx_dma: Fix SG capability check for MCDMA (bsc#1012628). - ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 (bsc#1012628). - ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 (bsc#1012628). - ARM: dts: stm32: Define VIO regulator supply on DHCOM (bsc#1012628). - ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor (bsc#1012628). - ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM (bsc#1012628). - arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point (bsc#1012628). - ARM: dts: imx50-evk: Fix the chip select 1 IOMUX (bsc#1012628). - dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio (bsc#1012628). - kunit: tool: unmark test_data as binary blobs (bsc#1012628). - rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled (bsc#1012628). - spi: fix client driver breakages when using GPIO descriptors (bsc#1012628). - Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER (bsc#1012628). - Input: elan_i2c - fix firmware update on newer ICs (bsc#1012628). - rfkill: Fix use-after-free in rfkill_resume() (bsc#1012628). - RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device() (bsc#1012628). - RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs (bsc#1012628). - perf lock: Correct field name "flags" (bsc#1012628). - perf lock: Don't free "lock_seq_stat" if read_count isn't zero (bsc#1012628). - SUNRPC: Fix oops in the rpc_xdr_buf event class (bsc#1012628). - drm: bridge: dw-hdmi: Avoid resetting force in the detect function (bsc#1012628). - tools, bpftool: Add missing close before bpftool net attach exit (bsc#1012628). - IB/hfi1: Fix error return code in hfi1_init_dd() (bsc#1012628). - ip_tunnels: Set tunnel option flag when tunnel metadata is present (bsc#1012628). - can: af_can: prevent potential access of uninitialized member in can_rcv() (bsc#1012628). - can: af_can: prevent potential access of uninitialized member in canfd_rcv() (bsc#1012628). - can: dev: can_restart(): post buffer from the right context (bsc#1012628). - can: ti_hecc: Fix memleak in ti_hecc_probe (bsc#1012628). - can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb() (bsc#1012628). - can: peak_usb: fix potential integer overflow on shift of a int (bsc#1012628). - can: flexcan: fix failure handling of pm_runtime_get_sync() (bsc#1012628). - can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPI (bsc#1012628). - can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for devm_regmap_init() (bsc#1012628). - can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistration (bsc#1012628). - can: m_can: m_can_handle_state_change(): fix state change (bsc#1012628). - can: m_can: m_can_class_free_dev(): introduce new function (bsc#1012628). - can: m_can: Fix freeing of can device from peripherials (bsc#1012628). - can: m_can: m_can_stop(): set device to software init mode before closing (bsc#1012628). - dmaengine: idxd: fix mapping of portal size (bsc#1012628). - ASoC: Intel: KMB: Fix S24_LE configuration (bsc#1012628). - ASoC: qcom: lpass-platform: Fix memory leak (bsc#1012628). - spi: cadence-quadspi: Fix error return code in cqspi_probe (bsc#1012628). - selftests/bpf: Fix error return code in run_getsockopt_test() (bsc#1012628). - MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpu (bsc#1012628). - drm/sun4i: dw-hdmi: fix error return code in sun8i_dw_hdmi_bind() (bsc#1012628). - net/mlx5: E-Switch, Fail mlx5_esw_modify_vport_rate if qos disabled (bsc#1012628). - bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made (bsc#1012628). - bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect (bsc#1012628). - can: kvaser_pciefd: Fix KCAN bittiming limits (bsc#1012628). - can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limits (bsc#1012628). - dmaengine: fix error codes in channel_register() (bsc#1012628). - iommu/vt-d: Move intel_iommu_gfx_mapped to Intel IOMMU header (bsc#1012628). - iommu/vt-d: Avoid panic if iommu init fails in tboot system (bsc#1012628). - can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery (bsc#1012628). - can: m_can: process interrupt only when not runtime suspended (bsc#1012628). - xfs: fix the minrecs logic when dealing with inode root child blocks (bsc#1012628). - xfs: strengthen rmap record flags checking (bsc#1012628). - xfs: directory scrub should check the null bestfree entries too (bsc#1012628). - xfs: ensure inobt record walks always make forward progress (bsc#1012628). - xfs: return corresponding errcode if xfs_initialize_perag() fail (bsc#1012628). - ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clock (bsc#1012628). - regulator: ti-abb: Fix array out of bound read access on the first transition (bsc#1012628). - libbpf: Fix VERSIONED_SYM_COUNT number parsing (bsc#1012628). - lib/strncpy_from_user.c: Mask out bytes after NUL terminator (bsc#1012628). - fail_function: Remove a redundant mutex unlock (bsc#1012628). - xfs: revert "xfs: fix rmap key and record comparison functions" (bsc#1012628). - selftests/seccomp: powerpc: Fix typo in macro variable name (bsc#1012628). - selftests/seccomp: sh: Fix register names (bsc#1012628). - bpf, sockmap: Skb verdict SK_PASS to self already checked rmem limits (bsc#1012628). - bpf, sockmap: On receive programs try to fast track SK_PASS ingress (bsc#1012628). - bpf, sockmap: Use truesize with sk_rmem_schedule() (bsc#1012628). - bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self (bsc#1012628). - efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP (bsc#1012628). - counter/ti-eqep: Fix regmap max_register (bsc#1012628). - efi/x86: Free efi_pgd with free_pages() (bsc#1012628). - sched/fair: Fix overutilized update in enqueue_task_fair() (bsc#1012628). - sched: Fix data-race in wakeup (bsc#1012628). - sched: Fix rq->nr_iowait ordering (bsc#1012628). - libfs: fix error cast of negative value in simple_attr_write() (bsc#1012628). - afs: Fix speculative status fetch going out of order wrt to modifications (bsc#1012628). - HID: logitech-hidpp: Add PID for MX Anywhere 2 (bsc#1012628). - HID: mcp2221: Fix GPIO output handling (bsc#1012628). - HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad (bsc#1012628). - HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver (bsc#1012628). - speakup: Do not let the line discipline be used several times (bsc#1012628). - ALSA: firewire: Clean up a locking issue in copy_resp_to_buf() (bsc#1012628). - ALSA: usb-audio: Add delay quirk for all Logitech USB devices (bsc#1012628). - ALSA: ctl: fix error path at adding user-defined element set (bsc#1012628). - ALSA: mixart: Fix mutex deadlock (bsc#1012628). - ALSA: hda/realtek - Add supported for Lenovo ThinkPad Headset Button (bsc#1012628). - ALSA: hda/realtek - Add supported mute Led for HP (bsc#1012628). - ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220) (bsc#1012628). - ALSA: hda/realtek - HP Headset Mic can't detect after boot (bsc#1012628). - tty: serial: imx: fix potential deadlock (bsc#1012628). - tty: serial: imx: keep console clocks always on (bsc#1012628). - HID: logitech-dj: Fix an error in mse_bluetooth_descriptor (bsc#1012628). - efivarfs: fix memory leak in efivarfs_create() (bsc#1012628). - staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids (bsc#1012628). - staging: mt7621-pci: avoid to request pci bus resources (bsc#1012628). - iio: light: fix kconfig dependency bug for VCNL4035 (bsc#1012628). - ext4: fix bogus warning in ext4_update_dx_flag() (bsc#1012628). - xfs: fix forkoff miscalculation related to XFS_LITINO(mp) (bsc#1012628). - ACPI: fan: Initialize performance state sysfs attribute (bsc#1012628). - iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum (bsc#1012628). - iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode (bsc#1012628). - iio: adc: mediatek: fix unset field (bsc#1012628). - iio: cros_ec: Use default frequencies when EC returns invalid information (bsc#1012628). - iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout (bsc#1012628). - iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used (bsc#1012628). - iio/adc: ingenic: Fix battery VREF for JZ4770 SoC (bsc#1012628). - iio: adc: stm32-adc: fix a regression when using dma and irq (bsc#1012628). - serial: ar933x_uart: disable clk on error handling path in probe (bsc#1012628). - arm64: dts: agilex/stratix10: Fix qspi node compatible (bsc#1012628). - spi: lpspi: Fix use-after-free on unbind (bsc#1012628). - spi: Introduce device-managed SPI controller allocation (bsc#1012628). - spi: npcm-fiu: Don't leak SPI master in probe error path (bsc#1012628). - spi: bcm2835aux: Fix use-after-free on unbind (bsc#1012628). - regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200} (bsc#1012628). - regulator: fix memory leak with repeated set_machine_constraints() (bsc#1012628). - regulator: avoid resolve_supply() infinite recursion (bsc#1012628). - regulator: workaround self-referent regulators (bsc#1012628). - gfs2: Fix regression in freeze_go_sync (bsc#1012628). - xtensa: fix TLBTEMP area placement (bsc#1012628). - xtensa: disable preemption around cache alias management calls (bsc#1012628). - mac80211: minstrel: remove deferred sampling code (bsc#1012628). - mac80211: minstrel: fix tx status processing corner case (bsc#1012628). - s390: fix system call exit path (bsc#1012628). - s390/cpum_sf.c: fix file permission for cpum_sfb_size (bsc#1012628). - s390/dasd: fix null pointer dereference for ERP requests (bsc#1012628). - Drivers: hv: vmbus: Allow cleanup of VMBUS_CONNECT_CPU if disconnected (bsc#1012628). - drm/amd/display: Add missing pflip irq for dcn2.0 (bsc#1012628). - drm/i915: Handle max_bpc==16 (bsc#1012628). - drm/i915/tgl: Fix Media power gate sequence (bsc#1012628). - io_uring: don't double complete failed reissue request (bsc#1012628). - mmc: sdhci-pci: Prefer SDR25 timing for High Speed mode for BYT-based Intel controllers (bsc#1012628). - mmc: sdhci-of-arasan: Allow configuring zero tap values (bsc#1012628). - mmc: sdhci-of-arasan: Use Mask writes for Tap delays (bsc#1012628). - mmc: sdhci-of-arasan: Issue DLL reset explicitly (bsc#1012628). - blk-cgroup: fix a hd_struct leak in blkcg_fill_root_iostats (bsc#1012628). - ptrace: Set PF_SUPERPRIV when checking capability (bsc#1012628). - seccomp: Set PF_SUPERPRIV when checking capability (bsc#1012628). - fanotify: fix logic of reporting name info with watched parent (bsc#1012628). - x86/microcode/intel: Check patch signature before saving microcode for early loading (bsc#1012628). - mm: never attempt async page lock if we've transferred data already (bsc#1012628). - mm: fix readahead_page_batch for retry entries (bsc#1012628). - mm: memcg/slab: fix root memcg vmstats (bsc#1012628). - mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault() (bsc#1012628). - Update config files. - commit 1b55838 - Update config files (bsc#1179102). Set AMIGA_PARTITION=y wherever AFFS_FS=m. The AMIGA_PARTITION's Kconfig help suggests: default y if (AMIGA || AFFS_FS=y). And we enable Amiga FS in some configs, but don't enable support for Amiga partitions. That is a bit pointless. So fix this. - commit cc720a5 ==== lvm2 ==== Subpackages: liblvm2cmd2_03 - Update lvm2.spec file (bsc#1177533) - in %postun, disable restart blk-availability.service & lvm2-monitor.service ==== lvm2-device-mapper ==== Subpackages: device-mapper libdevmapper-event1_03 libdevmapper1_03 libdevmapper1_03-32bit - Update lvm2.spec file (bsc#1177533) - in %postun, disable restart blk-availability.service & lvm2-monitor.service ==== php7 ==== Version update (7.4.12 -> 7.4.13) Subpackages: apache2-mod_php7 php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter - do not build firebird extension in any case - updated to 7.4.13: This is a security release which also contains several bug fixes. See https://www.php.net/ChangeLog-7.php#7.4.13 - deleted patch (upstreamed) - php-fix_net-snmp_disable_MD5.patch ==== procmail ==== - Add reproducible2.patch to negate influences from preinstallimage to make package build reproducible ==== purple-lurch ==== - Add libomemo-27.patch to fix encryption ==== python-pymongo ==== Version update (3.11.0 -> 3.11.1) - update to 3.11.1: - Support for Python 3.9. - Initial support for Azure and GCP KMS providers for client side field level encryption is in beta. See the docstring for :class:`~pymongo.mongo_client.MongoClient`, :class:`~pymongo.encryption_options.AutoEncryptionOpts`, and :mod:`~pymongo.encryption`. **Note: Backwards-breaking changes may be made before the final release.** - Fixed a bug where the :class:`bson.json_util.JSONOptions` API did not match the :class:`bson.codec_options.CodecOptions` API due to the absence of a :meth:`bson.json_util.JSONOptions.with_options` method. This method has now been added. - Fixed a bug which made it impossible to serialize :class:`~pymongo.errors.BulkWriteError` instances using :mod:`pickle`. - Fixed a bug wherein PyMongo did not always discard an implicit session after encountering a network error. - Fixed a bug where connections created in the background were not authenticated. - Fixed a memory leak in the :mod:`bson` module when using a :class:`~bson.codec_options.TypeRegistry`. ==== python-pyzmq ==== Version update (19.0.2 -> 20.0.0) - update to version 20.0.0: * fix build with ZeroMQ 4.3.3 * drops support for Python < 3.5 * Respect $PKG_CONFIG env for finding libzmq when building from source * :meth:`.Socket.bind` and :meth:`.Socket.connect` can now be used as context managers. * Hold GIL while calling ``zmq_curve_`` functions, which may fix apparent threadsafety issues. - skip_test_tracker.patch: refreshed ==== python-sortedcontainers ==== Version update (2.2.2 -> 2.3.0) - update to 2.3.0: * Make sort order stable when updating with large iterables. ==== tigervnc ==== Subpackages: libXvnc1 xorg-x11-Xvnc xorg-x11-Xvnc-module - u_tigervnc_update_default_vncxstartup.patch * check first for /usr/libexec/xinit/xinitrc, then /etc/X11/xinit/xinitrc (reported by aschnell @SUSE) ==== zeromq ==== Version update (4.3.2 -> 4.3.3) Subpackages: libzmq5 zeromq-tools - New upstream version 4.3.3: * Denial-of-Service on CURVE/ZAP-protected servers by unauthenticated clients. (CVE-2020-15166, bsc#1176116) If a raw TCP socket is opened and connected to an endpoint that is fully configured with CURVE/ZAP, legitimate clients will not be able to exchange any message. Handshakes complete successfully, and messages are delivered to the library, but the server application never receives them. For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-25wp-cf8g-938m * Stack overflow on server running PUB/XPUB socket (CURVE disabled). The PUB/XPUB subscription store (mtrie) is traversed using recursive function calls. In the remove (unsubscription) case, the recursive calls are NOT tail calls, so even with optimizations the stack grows linearly with the length of a subscription topic. Topics are under the control of remote clients - they can send a subscription to arbitrary length topics. An attacker can thus cause a server to create an mtrie sufficiently large such that, when unsubscribing, traversal will cause a stack overflow. (bsc#1176258) For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-qq65-x72m-9wr8 * Memory leak in PUB server induced by malicious client(s) without CURVE/ZAP. Messages with metadata are never processed by PUB sockets, but the metadata is kept referenced in the PUB object and never freed. (bsc#1176257) For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-4p5v-h92w-6wxw * Memory leak in client induced by malicious server(s) without CURVE/ZAP. When a pipe processes a delimiter and is already not in active state but still has an unfinished message, the message is leaked. (bsc#1176259) For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-wfr2-29gj-5w87 * Heap overflow when receiving malformed ZMTP v1 packets (CURVE disabled). By crafting a packet which is not valid ZMTP v2/v3, and which has two messages larger than 8192 bytes, the decoder can be tricked into changing the recorded size of the 8192 bytes static buffer, which then gets overflown by the next message. The content that gets written in the overflown memory is entirely decided by the sender. (bsc#1176256) For more information see the security advisory: https://github.com/zeromq/libzmq/security/advisories/GHSA-fc3w-qxf5-7hp6 For complete list of changes, see https://github.com/zeromq/libzmq/releases/tag/v4.3.3

1 0

openSUSE Release Engineering Meeting 01.12.2020 - ARM usecases initial review
by Lubos Kocman 01 Dec '20

01 Dec '20

Ahoy openSUSE let me thank you all for participating in the survey. The amount of responses was enormous (way more than entire Leap 15.2 release retro)! Let me share thoughts from initial review by peoplew ho came up with the survey. We definitely want to do this on release2release basis so we can see trends. There will be two public rounds of survey review tomorrow on jitsi, everybody is welcome to grab coffee/tee and join. More information can be seen in the invitation from Doug https://news.opensuse.org/2020/12/01/opensuse-release-team-to-share-results… All meeting minutes can be found here: https://etherpad.opensuse.org/p/ReleaseEngineering-meeting Participants: dimstar, dirk, lkocman, a_faerber, maxlin, guillaume_g The survey template for the future: https://etherpad.opensuse.org/p/survey-armv7-suggestions Q: Which ARMv6/ARMv7/ARMv8 (aarch64) hardware are you using? The option 'AArch64 based general purpose (e.g. Mustang, ThunderX/X2, Any UEFI AArch64 platform, aarch64-laptops, other) (SQ05)' contains a lot of choices. We need to break it down to the future. UEFI/aarch64 covers a huge - U-Boot implemented UEFI, too. Perhaps other with text field would help. Q: What distributions do you use on your ARMv6/v7/aarch64 Hardware? Ideas: custom image can be misleading as it could be modified Leap 15.1/15.2/TW image or also unlisted item (JeOS). The original idea was a self-built image containing non-standard patches/package- set/configuration. Andreas: mention Kubic next time? (cf. 211 for G01Q06) consider MicroOS, too? Q: How long are you using openSUSE on ARMv6/v7/v8 already? Growth from 36 - 124 over past 4 years Q: In case you selected Leap, what is the reason for that? Andreas: Some comments look like people don't know that we have aarch64 TW images? cf. 151 for G01Q06 Dirk: we need to invest little bit more into getting Leap (on Arm) right. Q: Would you be okay with migrating your existing Leap installation to openSUSE Tumbleweed? we somehow missed ARMv8/AArch64 but that was due to the description which was ARMv6/7 specific. Andreas: perhaps split questions into two. If you run Leap would you consider Leap question yes/no and vice versa (or split by architecture). Q: Please share us with any information you might want to add in addition. We need to do more marketing/blog posts around aarch64 Raspberry Pi (RPi4 in particular) Lubos: perhaps make a blog post with summary of our userbase and summarize current Arm situation in openSUSE project (what's available and what not). * Sound for Raspberry Pi 4 requested, let's make sure that plan is mentioned in the blog post. Not yet tracked by SUSE for backporting to SP3? Dirk: suggests to do a user case specific blog post for raspi-pi4 (e.g. first contact with opensource world, or computer for kids). Perhaps use the trend of RPi 400. Andreas: someone should test the RPi400 if we do the blog post. Andreas: can we do something so that openSUSE is perceived as more fine-tuned for Raspberry Pi? So it's comparable to e.g. raspbian Guillaume: I think this could be video decoding. Andreas: config tool on Raspbian for editing config.txt - consider a YaST Raspberry Pi module similar to raspi-config? Multilib on aarch64: apps like citrix seem to require 32bit libs. Can we ship multilib on Arm? Guillaume: Rasp Pi4 is capable of running both 32/64bit libs, but some Armv8 hardware are 64-bit only and would need ILP32. (zypper does not allow to install armv7 rpm packages on aarch64) - Andreas: note that ILP32 libs would not help Citrix apps, right? G: ILP32 would not help for 32-bit libs and ILP32 is unlikely to reach upstream. Andreas: -32bit packages seen for ilp32 project, do we need to enable this via some setting? (careful: do not confuse AArch32/armv7 and ILP32 here, we'd need aarch32 in a way that doesn't rule out ilp32 in the future). G: Please do not enable ILP32, there is no support upstream! Dirk: 32bit builds are in fact done on ARMv8 (Andreas: and hopefully not picking up Armv8 features) Andreas: While Raspberry Pi 1 is no longer sold, Raspberry Pi 0W still is, as "new" Armv6 device (G: It should remain in production until at least January 2026). Would be interesting to monitor how to Armv6 numbers evolve over time (getting less vs. going up?) Andreas: report of issues with Raspberry Pi firmware in transactional update mode (157) Andreas: report of problems with RPi.GPIO on RPi3/RPi4 (241) ddemaio: Might consider adding a demographic question to the survey to know when best to brief results to community. Something like "What region are you in. [] Asia [] EMEA [] Americas

1 0

New PulseAudio 14 coming to TW
by Ondrej Holecek 01 Dec '20

01 Dec '20

Hi all, you may have noticed announcement of new PulseAudio 14 release last week. This release bring many many fixes and features, for complete list please see [1]. I would like to point out one "feature" ( [2] ) which may be disruptive to you, depending on the PA configuration. Before PA14, GNOME sound settings manipulated stream routing by overwriting all entries in stream-restore database. PA14 prevents this behaviour, but during testing it turned out old GNOME settings can conflict with new routing logic. [3] Because of difficulty determining what setting was done by GNOME and what settings were done manually by users PA14, it was decided to do one time clearing of the stream-restore database. This will cause PA14 to forget all the routing on the first start of PA14. That means for example if you had different applications configured to play on different outputs, you will need to redo your settings once again. Not enabling this one-time routing database clear would lead to very misleading behaviour of PA14 playing on different outputs but showing different routing in applications. This should be only known inconvenience with new PA14. PA14 is currently in staging, looking forward to be included in one of upcoming Tumbleweed releases. ;) Ondrej 1: https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/14.0/ 2: https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/14.0/#compile-ti… 3: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/832

1 0

[opensuse-factory] New Tumbleweed snapshot 20201123 released!
by Dominique Leuenberger 01 Dec '20

01 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: binutils (2.35 -> 2.35.1) bison (3.7.3 -> 3.7.4) cifs-utils cryptsetup fuse3 gcc gcc10 (10.2.1+git872 -> 10.2.1+git958) gnome-software hwinfo (21.70 -> 21.71) ipset (7.6 -> 7.9) libvirt libyui (3.12.1 -> 3.12.2) libyui-qt (2.56.2 -> 2.56.3) libzip lz4 (1.9.2 -> 1.9.3) nvme-cli pam (1.4.0 -> 1.5.0) perl perl-HTTP-Cookies (6.08 -> 6.09) python-passlib (1.7.2 -> 1.7.4) qemu rsyslog system-users systemd-default-settings (0.4 -> 0.5) tcsh (6.22.02 -> 6.22.03) tk usbutils (012 -> 013) xprop (1.2.4 -> 1.2.5) yast2-alternatives (4.2.3 -> 4.3.0) yast2-bootloader (4.3.15 -> 4.3.16) yast2-firstboot (4.3.7 -> 4.3.8) yast2-journal (4.2.2 -> 4.3.0) yast2-network (4.3.27 -> 4.3.28) yast2-nis-client (4.3.4 -> 4.3.5) yast2-ruby-bindings (4.3.9 -> 4.3.11) yast2-storage-ng (4.3.20 -> 4.3.22) yast2-trans (84.87.20201108.e4c58f8262 -> 84.87.20201122.ac554fbdd6) yast2-ycp-ui-bindings (4.3.6 -> 4.3.7) zbar (0.23 -> 0.23.1) === Details === ==== binutils ==== Version update (2.35 -> 2.35.1) Subpackages: libctf-nobfd0 libctf0 - Reapply spec file cleanup from format_spec_file - Remove a SLE10 version check - Update to 2.35.1 and rebased branch diff: * This is a point release over the previous 2.35 version, containing bug fixes, and as an exception to the usual rule, one new feature. The new feature is the support for a new directive in the assembler: ".nop". This directive creates a single no-op instruction in whatever encoding is correct for the target architecture. Unlike the .space or .fill this is a real instruction, and it does affect the generation of DWARF line number tables, should they be enabled. ==== bison ==== Version update (3.7.3 -> 3.7.4) Subpackages: bison-lang - GNU bison 3.7.4: * In Yacc mode, YYEMPTY token was missing its macro definiton * Fix lalr1.cc skeleton internal assertions * Make macro YY_ASSERT obey the api.prefix %define variable * Work around C++ limitations for long assertions * The YYBISON macro in generated "regular C parsers" is now defined to the version of Bison as an integer ==== cifs-utils ==== - prepare usrmerge (boo#1029961) ==== cryptsetup ==== Subpackages: cryptsetup-lang libcryptsetup12 libcryptsetup12-32bit libcryptsetup12-hmac - prepare usrmerge (boo#1029961) ==== fuse3 ==== Subpackages: libfuse3-3 - Drop /sbin links; they do not seem to be used from anywhere. - Package "permission" is required in %post, not %pre. - Update descriptions. ==== gcc ==== Subpackages: cpp gcc-info libstdc++-devel - BuildRequire packages we build symlinks to. [bsc#1178675] ==== gcc10 ==== Version update (10.2.1+git872 -> 10.2.1+git958) Subpackages: cpp10 gcc10-info gcc10-locale libasan6 libatomic1 libgcc_s1 libgcc_s1-32bit libgfortran5 libgomp1 libitm1 liblsan0 libobjc4 libquadmath0 libstdc++6 libstdc++6-32bit libstdc++6-devel-gcc10 libstdc++6-locale libstdc++6-pp-gcc10 libstdc++6-pp-gcc10-32bit libtsan0 libubsan1 - Add gcc10-amdgcn-llvm-as.patch to fix build of amdgcn offload compiler with llvm11. - Update to gcc-10 branch head (98ba03ffe0b9f37b4916ce6238), git958. * Includes fix for memcpy miscompilation on aarch64. [bsc#1178624, bsc#1178577] - Fix 32bit libgnat.so link. [bsc#1178675] ==== gnome-software ==== Subpackages: gnome-software-lang libgnomesoftware-3_38_0 - Added gnome-packagekit as recommended dependency: gnome-software-launch-gpk-update-viewer-for-updates.patch needs gnome-packagekit to work (SLE only). ==== hwinfo ==== Version update (21.70 -> 21.71) - merge gh#openSUSE/hwinfo#89 - rework network device detection on aarch64 (bsc#1177600, bsc#1177261) - 21.71 ==== ipset ==== Version update (7.6 -> 7.9) Subpackages: libipset13 - Update to release 7.9 * Enable memory accounting for ipset allocations * Expose the initval hash parameter to userspace * Add bucketsize parameter to all hash types * Support the -exist flag with the destroy command ==== libvirt ==== Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - spec: Remove creation of libvirt group and add Requires to the libvirt group created with GID 108 by the system-group-libvirt package. jsc#SLE-11629 ==== libyui ==== Version update (3.12.1 -> 3.12.2) - Higher priority for toplevel menu shortcuts (bsc#1175489) - Dropped support for openSUSE 13.2 (or earlier) builds in .spec file - 3.12.2 ==== libyui-qt ==== Version update (2.56.2 -> 2.56.3) - Honor menu bar toplevel menu enabled/disabled and visibility state (boo#1178394 again) - 2.56.3 ==== libzip ==== - Use full _libdir path in libzip.pc ==== lz4 ==== Version update (1.9.2 -> 1.9.3) Subpackages: liblz4-1 liblz4-1-32bit - Update to release 1.9.3 * api: LZ4_decompress_safe_partial() now supports unknown compressed size * api: improved LZ4F_compressBound() with automatic flushing * cli: multiple files are compressed now using the legacy format ==== nvme-cli ==== - Drop '-f' option with %service_del_postun This option shouldn't be needed besides very few special cases. But this package doesn't seem to belong to this category. ==== pam ==== Version update (1.4.0 -> 1.5.0) Subpackages: pam-32bit pam-doc - Update to 1.5.0 - obsoletes pam-bsc1178727-initialize-daysleft.patch - Multiple minor bug fixes, portability fixes, and documentation improvements. - Extended libpam API with pam_modutil_check_user_in_passwd function. - pam_faillock: changed /run/faillock/$USER permissions from 0600 to 0660. - pam_motd: read motd files with target user credentials skipping unreadable ones. - pam_pwhistory: added a SELinux helper executable. - pam_unix, pam_usertype: implemented avoidance of certain timing attacks. - pam_wheel: implemented PAM_RUSER fallback for the case when getlogin fails. - pam_env: Reading of the user environment is deprecated and will be removed at some point in the future. - libpam: pam_modutil_drop_priv() now correctly sets the target user's supplementary groups, allowing pam_motd to filter messages accordingly - Refresh pam-xauth_ownership.patch - pam_tally2-removal.patch: Re-add pam_tally2 for deprecated sub-package - pam_cracklib-removal.patch: Re-add pam_cracklib for deprecated sub-package - pam_cracklib: added code to check whether the password contains a substring of of the user's name of at least <N> characters length in some form. This is enabled by the new parameter "usersubstr=<N>" See https://github.com/libpwquality/libpwquality/commit/bfef79dbe6aa525e9557bf4… [jsc#SLE-16719, jsc#SLE-16720, pam-pam_cracklib-add-usersubstr.patch] - pam_xauth.c: do not free() a string which has been (successfully) passed to putenv(). [bsc#1177858, pam-bsc1177858-dont-free-environment-string.patch] - Initialize pam_unix pam_sm_acct_mgmt() local variable "daysleft" to avoid spurious (and misleading) Warning: your password will expire in ... days. fixed upstream with commit db6b293046a [bsc#1178727, pam-bsc1178727-initialize-daysleft.patch] - Enable pam_faillock [bnc#1171562] - /usr/bin/xauth chokes on the old user's $HOME being on an NFS file system. Run /usr/bin/xauth using the old user's uid/gid Patch courtesy of Dr. Werner Fink. [bsc#1174593, pam-xauth_ownership.patch] - pam-login_defs-check.sh: Fix the regexp to get a real variable list (boo#1164274). - Revert the previous change [SR#815713]. The group is not necessary for PAM functionality but used only during testing. The test system should therefore create this group. [bsc#1171016, pam.spec] - Add requirement for group "wheel" to spec file. [bsc#1171016, pam.spec] ==== perl ==== Subpackages: perl-base perl-doc - Correct perl license According to https://dev.perl.org/licenses/ perl is licensed under the artistic license or the GPL 1.0 or later ==== perl-HTTP-Cookies ==== Version update (6.08 -> 6.09) - updated to 6.09 see /usr/share/doc/packages/perl-HTTP-Cookies/Changes 6.09 2020-11-19 22:20:47Z - Allow HttpOnly cookies to be loaded by HTTP::Cookies::Netscape (GH#63) (Charlie Hothersall-Thomas) ==== python-passlib ==== Version update (1.7.2 -> 1.7.4) - Update URL to https://foss.heptapod.net/python-libs/passlib - Add optional dependencies: Django, apache2-utils - Update %check to report skipped tests - Update to v0.7.4 * updated tests to pass for Django 1.8 - 3.1 * CryptContext will now throw UnknownHashError when it can't identify a hash provided to methods such as CryptContext.verify Previously it would throw a generic :exc:`ValueError`. - from v1.7.3 * ldap_salted_sha512 LDAP "salted hash" support added for SHA-256 and SHA-512 * bcrypt: Fixed Python 3 OS native backend detection on BSD platforms * safe_crypt added support for crypt.crypt unexpectedly returning bytes under Python 3 * safe_crypt added support for crypt.crypt throwing OSError which can happen as of Python 3.9 * passlib.ext.django fixed lru_cache import for Django 3 compatibility * bcrypt_sha256 Internal algorithm has been changed to use HMAC-SHA256 instead of plain SHA256 * bcrypt OS native backend ("os_crypt") now raises the new PasswordValueError if password is provided as non-UTF8 bytes * lookup_hash's required=False kwd was modified to report unsupported hashes via the HashInfo.supported attribute; rather than letting ValueErrors through uncaught. * Various Python 3.9 compatibility fixes ==== qemu ==== Subpackages: qemu-arm qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-nfs qemu-block-rbd qemu-block-ssh qemu-chardev-baum qemu-guest-agent qemu-hw-display-qxl qemu-hw-usb-redirect qemu-hw-usb-smartcard qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-microvm qemu-ppc qemu-s390 qemu-seabios qemu-sgabios qemu-skiboot qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-spice-app qemu-vgabios qemu-vhost-user-gpu qemu-x86 - A patch has been applied to virt-manager to handle qemu spice related modules not being present, so undo the change from Sep 30, 2020. Once again qemu-hw-display-qxl and qemu-hw-usb-redirect are Recommends and not Required by the qemu package (boo#1157320 boo#1176517, boo#1178141) - For jsc#SLE-11629, change qemu, qemu-tools, and qemu-guest-agent to rely on system-user-qemu and system-group-kvm to provide now static system UIDs and GID's for qemu user and group, and kvm group. This will make guest migration more seamless for new installations since there is no chance of having required ID's differ in value. ==== rsyslog ==== - fix location and naming of journald dropin (bsc#1178288) ==== system-users ==== Subpackages: system-group-hardware system-group-wheel system-user-bin system-user-daemon system-user-ftp system-user-games system-user-lp system-user-mail system-user-man system-user-news system-user-nobody system-user-tftp system-user-upsd system-user-uucp system-user-wwwrun - Add qemu user to kvm group - Add system account and groups for kvm, qemu, and libvirt (jsc#SLE-11629) New files: system-group-kvm.conf, system-group-libvirt.conf, system-user-qemu.conf ==== systemd-default-settings ==== Version update (0.4 -> 0.5) Subpackages: systemd-default-settings-branding-SLE systemd-default-settings-branding-openSUSE - Issue a daemon-reload in %post of the main package - Import 0.5 0c5e241 SLE: turn off RemoveIPC by default for logind (fate#320125) cb6914f SLE: restore ProtectHostname=no for udevd (bsc#1178374) 7e332a6 Add a header in all each drop-ins 465e1c7 Makefile: simplify 'archive' target ==== tcsh ==== Version update (6.22.02 -> 6.22.03) Subpackages: tcsh-lang - Update to tcsh bug fix version V6.22.03 - 20201118 * Fix $x:q:h and $x:q:t to not crash (alzwded) with strings containing / * Block SIGHUP while writing history/directory stack (Brett Frankenberger) * Fixed reversed test that broke history merging (Brett Frankenberger) * Prevent recursive entry for writing history (Brett Frankenberger) * alxwded@github, keep track of the :g and :a modifiers per modifier they affect. * alzwded@github, fix infinite loop with :gas variable modifier * PR/88: Add a Q: modifier that preserves empty arguments leaving :q alone. - Port the patches to V6.22.03 * tcsh-6.15.00-pipe.dif * tcsh-6.17.06-dspmbyte.dif * tcsh-6.18.03-catalogs.dif * tcsh-6.22.02-local-dotlock.dif - Remove patches now upstream * tcsh-6.22.02-double_tilde.dif * tcsh-6.22.02-history-merge.dif * tcsh-6.22.02-workaround-common.patch - Make test suite work - prepare usrmerge (boo#1029961) ==== tk ==== - Fix manpage symlink for wish8.6. ==== usbutils ==== Version update (012 -> 013) - Update to version 013: * lsusb.8.in: do not mention usb.ids * usb-devices.1: don't mention bash * usbhid-dump: move manpage to main directory out of subdir * usbhid-dump.8: add SPDX header * usbhid-dump.8: autogenerate it with the usbutils version number * usbhid-dump: add SPDX identifiers to all files. * usbhid-dump: remove libusb.h libusb_strerror() implementation * usbhid-dump: remove lib directory * usbhid-dump: move .h files into src/ directory * Makefile.am: add usbhid-dump.8 to distclean list * usbhid-dump: some autoconf cleanup * usbhid-dump: remove some dev_list functions that were never used * dump_audiostreaming_interface(): remove unused variable * usbmisc: initialize string buffer before reading from device. * lsusb.py: drop trailing space on non-hub devices * lsusb.py: strip whitespace from device strings * lsusb(8): fix formatting * lsusb(8): document --tree * lsusb.py: remove private paths for usb.ids * Additional device classes for usb-devices script * usbhid-dump: Do not use rindex * Move read_sysfs_prop() from names.c to its own file * sysfs: Don't return bogus data for devices under a hub * lsusb: Use vendor and product name fallback logic in -D mode too * lsusb: Get manufacturer, product, and serial from sysfs * bootstrap: change /bin/bash to /bin/sh * lsusb: fix two typos in UVC Extension Unit descriptor * usbhid-dump: Put back autoconf check for libusb_set_option() ==== xprop ==== Version update (1.2.4 -> 1.2.5) - Update to version 1.2.5 * Add missing `-help` function * Make output with unknown width terminal the same as old code * Free string list returned from XmbTextPropertyToTextList * Correct icon buffer width computation for truecolor terminals * Check return value from ioctl(TIOCGWINSZ) * Don't display icons if they would line-wrap. * Break down memory allocation logic and fix overallocating for UTF8. * Fix aspect ratio for icon display by using two characters per icon pixel. * Support true color output for icons if the terminal advertises it. * Fix formatting of back-to-back not shown icons. ==== yast2-alternatives ==== Version update (4.2.3 -> 4.3.0) - Handle properly help command for alternatives client (bsc#1172340) - 4.3.0 ==== yast2-bootloader ==== Version update (4.3.15 -> 4.3.16) - Make wording in summary more consistent (related to jsc#SLE-16033) - 4.3.16 ==== yast2-firstboot ==== Version update (4.3.7 -> 4.3.8) - Removed duplicated lan client from the firstboot control file and modified the firstboot_dhcp_setup client using the installation dhcp setup client directly (bsc#1177797) - 4.3.8 ==== yast2-journal ==== Version update (4.2.2 -> 4.3.0) - print properly help to avoid accidental opening of module by bash completion (bsc#1172340) - 4.3.0 ==== yast2-network ==== Version update (4.3.27 -> 4.3.28) - Fixed detection of connection configuration changes (bsc#1178950) - 4.3.28 - bnc#1175360 - more robust AY profile parser. Do not crash with internal error on unknown node in interfaces section - support for static configurations without ip address - bnc#1175206 - support for defined default when missing bootproto in AY ==== yast2-nis-client ==== Version update (4.3.4 -> 4.3.5) - Do not ask for package installation when CLI help is called (bsc#1172340) - 4.3.5 ==== yast2-ruby-bindings ==== Version update (4.3.9 -> 4.3.11) - Removed Requires / BuildRequires to libyui (build failure) (related to bsc#1175489) - 4.3.11 - Added UI test for menu bar shortcut priority (bsc#1175489) - 4.3.10 ==== yast2-storage-ng ==== Version update (4.3.20 -> 4.3.22) - print properly help to avoid accidental opening of module by bash completion (bsc#1172340) - 4.3.22 - Improved error handling for mounting /sys/firmware/efi/efivars (bsc#1174029): - Also check in /proc/filesystems if efivarfs is supported - Don't throw exception if a mount fails, just display a warning - 4.3.21 ==== yast2-trans ==== Version update (84.87.20201108.e4c58f8262 -> 84.87.20201122.ac554fbdd6) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20201122.ac554fbdd6: * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Spanish) * Translated using Weblate (Slovak) * Translated using Weblate (Japanese) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * New POT for text domain 'nis'. * New POT for text domain 'journal'. * Translated using Weblate (Slovak) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * New POT for text domain 'storage'. * New POT for text domain 'alternatives'. * Translated using Weblate (Slovak) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * Translated using Weblate (Japanese) * New POT for text domain 'bootloader'. * New POT for text domain 'firstboot'. - Update to version 84.87.20201114.32b95e799c: * Translated using Weblate (Italian) * New POT for text domain 'base'. * Translated using Weblate (Indonesian) * Translated using Weblate (Indonesian) * Translated using Weblate (Indonesian) * Translated using Weblate (Indonesian) * Translated using Weblate (Indonesian) * New POT for text domain 'users'. * New POT for text domain 'storage'. * New POT for text domain 'control'. * Translated using Weblate (Portuguese (Brazil)) ==== yast2-ycp-ui-bindings ==== Version update (4.3.6 -> 4.3.7) - Extended MenuBar-shortcut-test example to test shortcut priority (bsc#1175489) - 4.3.7 ==== zbar ==== Version update (0.23 -> 0.23.1) - Update to version 0.23.1 * Add i18n translation support and add a pt_BR translation * Change default to autodetect python and gtk versions * Some documentation updates * Add support for binary data extraction * Add support for raw decoding without charset conversions * Add one shot scanning mode * Fix help messages * Fix some makefile issues * Fix error detection in video4linux read * Fix pkgconfig for zbar-qt5 * Fix a double-free condition - Add 0002-get-rid-of-gettext_h.patch

6 7