September 2019 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] New Tumbleweed snapshot 20190926 released!
by Dominique Leuenberger 30 Sep '19

30 Sep '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: busybox ceph coreutils filesystem grep kbd ncurses permissions (1550_20190830 -> 1550_20190913) polkit-default-privs (13.2+20190905.0016c47 -> 13.2+20190919.a656be4) psmisc rubygem-passenger (6.0.2 -> 6.0.4) screen sed spec-cleaner (1.1.4 -> 1.1.5) ucode-intel (20190618 -> 20190918) udisks2 util-linux util-linux-systemd xz === Details === ==== busybox ==== - Trim marketing from description. ==== ceph ==== Subpackages: librados2 librbd1 - Addendum: + upstream Nautilus 14.2.4 brings the following notable changes: * fixed a ceph-volume regression introduced by 14.2.3 (NOTE: SES customers were never exposed to this regression) (bsc#1132767) - Addendum: + upstream Nautilus 14.2.3 brings the following notable changes: * Fixed a denial of service vulnerability where an unauthenticated client of Ceph Object Gateway could trigger a crash from an uncaught exception (CVE-2019-10222/bsc#1145093) * Fixed bsc#1151994 - Nautilus-based librbd clients can not open images on Jewel clusters * The RGW num_rados_handles has been removed in Ceph 14.2.3 (bsc#1151995) * "osd_deep_scrub_large_omap_object_key_threshold" has been lowered in Nautilus 14.2.3 (bsc#1152002) * The ceph dashboard now supports silencing Prometheus notifications (bsc#1141174) - Addendum: + upstream Nautilus 14.2.2 brought the following notable changes: * The no{up,down,in,out} related commands have been revamped (bsc#1151990) * radosgw-admin gets two new subcommands for managing expire-stale objects (bsc#1151991) * Deploying a single new BlueStore OSD on a cluster upgraded to SES6 from SES5 breaks pool utilization stats reported by ceph df (bsc#1151992) * As of 14.2.2, Ceph cluster will issue a health warning if CRUSH tunables are older than "hammer" (bsc#1151993) ==== coreutils ==== Subpackages: coreutils-lang - Do not recommend lang package. The lang package already has a supplements. ==== filesystem ==== - Add /usr/libexec and /usr/local/libexec ==== grep ==== Subpackages: grep-lang - Do not recommend lang package. The lang package already has a supplements. ==== kbd ==== Subpackages: kbd-legacy - Allow YaST to select Iranian (Persian, Farsi) keyboard layout (bsc#1092920) ==== ncurses ==== Subpackages: libncurses6 ncurses-devel ncurses-utils tack terminfo terminfo-base terminfo-screen - Add ncurses patch 20190907 + add --with-ada-libname option and modify Ada95 configuration to allow renaming the "AdaCurses" library (prompted by proposed changes by Pascal Pignard). + modify configure script to distinguish gcc from icc and clang when the --enable-warnings option is not used, to avoid unnecessary warnings about unrecognized inline options (report by Sven Joachim). - Add ncurses patch 20190831 + build-fixes for configuration using --program-suffix with Ada95, noticed with MacOS but applicable to other platforms without libpanelw, etc. - Add ncurses patch 20190824 + fix some cppcheck warnings, mostly style, in ncurses test-programs. - Add ncurses patch 20190817 + amend 20181208 changes for wbkgd() and wbkgrnd(), fixing a few details where it still differed from SVr4. + fix some cppcheck warnings, mostly style, in ncurses test-programs. ==== permissions ==== Version update (1550_20190830 -> 1550_20190913) Subpackages: chkstat permissions-config permissions-doc - Update to version 20190913: * setgid bit for nagios directory (bsc#1028975, bsc#1150345) - This also restructures the sources for the permission package ==== polkit-default-privs ==== Version update (13.2+20190905.0016c47 -> 13.2+20190919.a656be4) - Update to version 13.2+20190919.a656be4: * transition networkd rules to subpackage ==== psmisc ==== Subpackages: psmisc-lang - Do not recommend lang package. The lang package already has a supplements. ==== rubygem-passenger ==== Version update (6.0.2 -> 6.0.4) Subpackages: ruby2.6-rubygem-passenger rubygem-passenger-apache2 - updated to version 6.0.4 Release 6.0.4 - ------------ * Adds Debian 10 "Buster" packages. Release 6.0.3 - ------------ * Add and option to specify the spawn dir during startup, which is specifically useful for CageFS users. Contributed by @plmnikulin. Closes GH-2145. - Apache: `PassengerSpawnDir` - Nginx: `passenger_spawn_dir` * [Nginx] Bumps the preferred Nginx version to 1.17.3 (previously 1.15.8). * [Nginx] The preferred PCRE version is now 8.43 (previously 8.42). * Adds Ubuntu 19.04 "Disco" packages, and removes Ubuntu 18.10 "Cosmic" and Ubuntu 14.04 "Trusty" packages. * Changes minimum supported macOS version to 10.12 Sierra. * Improves container detection and fixes a compilation warning in GCC 8+. Closes GH-2186. * Allowed externally specifying an app instance to send a request to. Contributed by Mark R. James (@mrj). * Fixed an incompatibility with sending requests to specific app instances, when using the rails web-console gem. Contributed by Mark R. James (@mrj). * Fixed a regression (introduced in 5.1.9) where some hooks were not called. Closes GH-2103. Contributed by Mark R. James (@mrj). * Fixes compilation with clang 8 (latest macOS update) by updating vendored boost library from 1.67 to 1.69. * Reverts a regression intruduced in 6.0.2 where Passenger would crash if it had to use the disk backed response cache. Closes GH-2189. * [Nginx] Adds an option `passenger_buffer_upload` to allow buffering uploaded data in Passenger before forwarding it to the app. As a workaround for apps that cannot handle chunked data. * [Enterprise] When using deferred port binding, no longer binds port if all apps do not start up. * Updated various library versions used in precompiled binaries (used for e.g. gem installs): - PCRE 8.43 (was 8.42) - Curl 7.65.1 (was 7.64.0) - ccache 3.7.3 (was 3.6) - Git 2.22.0 (was 2.20.1) - OpenSSL 1.0.2s (was 1.0.2q) - RubyGems 3.0.6 (was 3.0.2) - GnuPG 2.2.16 (was 2.2.13) - libgcrypt 1.8.5 (was 1.8.4) - libgpg_error 1.36 (was 1.35) - libiconv 1.16 (was 1.15) - Ruby: - 2.4.5 -> 2.4.6 - 2.5.3 -> 2.5.5 - 2.6.1 -> 2.6.3 ==== screen ==== - Use proper Requires(*), ticking off a FIXME as fixed. ==== sed ==== Subpackages: sed-lang - Do not recommend lang package. The lang package already has a supplements. ==== spec-cleaner ==== Version update (1.1.4 -> 1.1.5) - Update to 1.1.5 bsc#1099674: * Use https in URL in spec-cleaner.spec test * Remove duplicated backslash in regexp * Parallelize test run * Add jupyter_move_config to excludes from bracketing * Do not fail if URL is ftp:// or other protocol * Make xdist enabled by default on all test runs and add xdist to deps * By default remove groups from packages - remove spec-cleaner-1.1.4_test_https.patch that is no longer needed ==== ucode-intel ==== Version update (20190618 -> 20190918) - Updated to 20190918 bugfix release (bsc#1151232 bsc#1138185) Processor Identifier Version Products Model Stepping F-MO-S/PI Old->New - --- updated platforms ------------------------------------ BDW-U/Y E0/F0 6-3d-4/c0 0000002d->0000002e Core Gen5 HSX-EX E0 6-3f-4/80 00000014->00000016 Xeon E7 v3 BDW-H/E3 E0/G0 6-47-1/22 00000020->00000021 Core Gen5 BDX-ML B0/M0/R0 6-4f-1/ef 0b000036->0b000038 Xeon E5/E7 v4; Core i7-69xx/68xx BDX-DE V1 6-56-2/10 0000001a->0000001c Xeon D-1520/40 BDX-DE V2/3 6-56-3/10 07000017->07000019 Xeon D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19 BDX-DE Y0 6-56-4/10 0f000015->0f000017 Xeon D-1557/59/67/71/77/81/87 BDX-NS A0 6-56-5/10 0e00000d->0e00000f Xeon D-1513N/23/33/43/53 SKX-SP H0/M0/U0 6-55-4/b7 0200005e->00000064 Xeon Scalable SKX-D M1 6-55-4/b7 0200005e->00000064 Xeon D-21xx CLX-SP B1 6-55-7/bf 05000021->0500002b Xeon Scalable Gen2 ==== udisks2 ==== Subpackages: libudisks2-0 libudisks2-0_btrfs udisks2-lang - Do not recommend lang package. The lang package already has a supplements. ==== util-linux ==== Subpackages: libblkid-devel libblkid1 libblkid1-32bit libfdisk1 libmount1 libmount1-32bit libsmartcols1 libuuid-devel libuuid1 libuuid1-32bit util-linux-lang - Do not recommend lang package. The lang package already has a supplements. ==== util-linux-systemd ==== - Do not recommend lang package. The lang package already has a supplements. ==== xz ==== Subpackages: liblzma5 liblzma5-32bit xz-devel xz-lang - Do not recommend lang package. The lang package already has a supplements. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Willing to help the 'Office' repo
by Christophe Giboudeaux 30 Sep '19

30 Sep '19

Hi, Background: Like in (too many) other projects, getting submit requests reviewed in the office project takes ages due to maintainers being inactive/unresponsive. I'd like to become maintainer for this repository and created https:// build.opensuse.org/request/show/732790 As there are important requests pending (specially for german users), I'm posting here to speed things up. Help needed :) Thanks, Christophe -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] New Tumbleweed snapshot 20190916 released!
by Dominique Leuenberger 28 Sep '19

28 Sep '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: 389-ds PackageKit alsa amtk (5.0.0 -> 5.0.1) analitza (19.08.0 -> 19.08.1) autoyast2 (4.2.7 -> 4.2.8) blinken (19.08.0 -> 19.08.1) bovo (19.08.0 -> 19.08.1) cairo cervisia (19.08.0 -> 19.08.1) cogl (1.22.4+20190423.9bc253e9 -> 1.22.4+8) cups-filters dnsmasq drbd drbd-utils (9.9.0 -> 9.10.0) elfutils eog-plugins (3.26.3 -> 3.26.4) epiphany evince (3.32.0 -> 3.32.0+28) exim (4.92.1 -> 4.92.2) festival ffmpegthumbs (19.08.0 -> 19.08.1) file-roller (3.32.1 -> 3.32.2) findutils (4.6.0 -> 4.7.0) flatpak-builder (1.0.7 -> 1.0.8) gawk gdk-pixbuf (2.38.1 -> 2.38.2) glib2 (2.60.6 -> 2.60.7) gspell (1.8.1 -> 1.8.2) gthumb (3.8.0 -> 3.8.1) gtk3 (3.24.10 -> 3.24.11) i4l-base ibus iio-sensor-proxy (2.7 -> 2.8) inn juk (19.08.0 -> 19.08.1) k3b (19.08.0 -> 19.08.1) kalgebra (19.08.0 -> 19.08.1) kalzium (19.08.0 -> 19.08.1) kanagram (19.08.0 -> 19.08.1) kapptemplate (19.08.0 -> 19.08.1) katomic (19.08.0 -> 19.08.1) kblackbox (19.08.0 -> 19.08.1) kblocks (19.08.0 -> 19.08.1) kbounce (19.08.0 -> 19.08.1) kbreakout (19.08.0 -> 19.08.1) kbruch (19.08.0 -> 19.08.1) kcachegrind (19.08.0 -> 19.08.1) kcron (19.08.0 -> 19.08.1) kde-print-manager (19.08.0 -> 19.08.1) kdeedu-data (19.08.0 -> 19.08.1) kdegraphics-thumbnailers (19.08.0 -> 19.08.1) kdenetwork-filesharing (19.08.0 -> 19.08.1) kdf (19.08.0 -> 19.08.1) kdiamond (19.08.0 -> 19.08.1) kernel-firmware (20190815 -> 20190827) kernel-source (5.2.11 -> 5.2.14) kgeography (19.08.0 -> 19.08.1) kget (19.08.0 -> 19.08.1) kgoldrunner (19.08.0 -> 19.08.1) khangman (19.08.0 -> 19.08.1) kig (19.08.0 -> 19.08.1) kimagemapeditor (19.08.0 -> 19.08.1) kipi-plugins (19.08.0 -> 19.08.1) kiriki (19.08.0 -> 19.08.1) kiten (19.08.0 -> 19.08.1) kjumpingcube (19.08.0 -> 19.08.1) klines (19.08.0 -> 19.08.1) kmahjongg (19.08.0 -> 19.08.1) kmines (19.08.0 -> 19.08.1) kmouth (19.08.0 -> 19.08.1) kmplot (19.08.0 -> 19.08.1) knavalbattle (19.08.0 -> 19.08.1) knetwalk (19.08.0 -> 19.08.1) kolf (19.08.0 -> 19.08.1) kollision (19.08.0 -> 19.08.1) kolourpaint (19.08.0 -> 19.08.1) konquest (19.08.0 -> 19.08.1) kpat (19.08.0 -> 19.08.1) kqtquickcharts (19.08.0 -> 19.08.1) kreversi (19.08.0 -> 19.08.1) krita (4.2.5 -> 4.2.6) kshisen (19.08.0 -> 19.08.1) ksirk (19.08.0 -> 19.08.1) kspaceduel (19.08.0 -> 19.08.1) ksquares (19.08.0 -> 19.08.1) ksudoku (19.08.0 -> 19.08.1) ksystemlog (19.08.0 -> 19.08.1) kteatime (19.08.0 -> 19.08.1) ktimer (19.08.0 -> 19.08.1) ktuberling (19.08.0 -> 19.08.1) kturtle (19.08.0 -> 19.08.1) kubrick (19.08.0 -> 19.08.1) kvm_stat (5.2.5 -> 5.2.13) kwordquiz (19.08.0 -> 19.08.1) libXpresent libguestfs libkdegames (19.08.0 -> 19.08.1) libkeduvocdocument (19.08.0 -> 19.08.1) libkmahjongg (19.08.0 -> 19.08.1) libraw librsvg (2.44.14 -> 2.44.15) libshout (2.4.1 -> 2.4.3) libsigc++2 libuv (1.30.1 -> 1.31.0) libvirt (5.6.0 -> 5.7.0) libxml2 lokalize (19.08.0 -> 19.08.1) lskat (19.08.0 -> 19.08.1) makedumpfile (1.6.5 -> 1.6.6) mariadb mbox-importer (19.08.0 -> 19.08.1) multipath-tools (0.8.2+26+suse.d884195 -> 0.8.2+27+suse.3ff280b) netpbm ocfs2-tools opencv3 parley (19.08.0 -> 19.08.1) patterns-base patterns-desktop perl-Glib (1.328 -> 1.3291) perl-HTML-Clean (0.9 -> 1.2) perl-Mojolicious (8.23 -> 8.24) perl-XML-Parser permissions (1550_20190711 -> 1550_20190830) pim-data-exporter (19.08.0 -> 19.08.1) pim-sieve-editor (19.08.0 -> 19.08.1) polkit-default-privs (13.2+20190806.841a06b -> 13.2+20190905.0016c47) python-libvirt-python (5.6.0 -> 5.7.0) python-pygit2 (0.28.1 -> 0.28.2) rpm-config-SUSE (0.g32 -> 0.g35) rubygem-packaging_rake_tasks (1.4.9 -> 1.4.10) rubygem-sassc (2.1.0 -> 2.2.0) salt samba (4.10.5+git.105.2bd98587873 -> 4.10.8+git.124.a2010fbd0de) step (19.08.0 -> 19.08.1) sweeper (19.08.0 -> 19.08.1) texinfo (6.5 -> 6.6) umbrello (19.08.0 -> 19.08.1) upower (0.99.10 -> 0.99.11) util-linux util-linux-systemd virtualbox (6.0.10 -> 6.0.12) webkit2gtk3 (2.24.4 -> 2.26.0) xen xtables-addons (3.3_k5.2.11_1 -> 3.5_k5.2.14_1) yakuake (19.08.0 -> 19.08.1) yast2-installation (4.2.11 -> 4.2.12) yast2-schema (4.2.1 -> 4.2.2) === Details === ==== 389-ds ==== Subpackages: lib389 libsvrcore0 - Change permission of ns-slapd from 750 to 755 to allow non-root users to start the ldap server in containers and development environments. ==== PackageKit ==== Subpackages: PackageKit-backend-zypp PackageKit-gstreamer-plugin PackageKit-gtk3-module PackageKit-lang libpackagekit-glib2-18 typelib-1_0-PackageKitGlib-1_0 - Modify PackageKit-systemd-timers.patch: Port the cron configuration variables to the script, and add -sendwait parameter to mail in the script(bsc#1130306). ==== alsa ==== Subpackages: libasound2 libasound2-32bit - Disable LTO completely (boo#1149612); the versioned symbols in alsa-lib doesn't seem work properly on some apps ==== amtk ==== Version update (5.0.0 -> 5.0.1) Subpackages: amtk-5-lang libamtk-5-0 - Update to version 5.0.1: + Fix a small, new compilation warning. + Build from Git: allow building with gettext ? 0.20. + Write more development notes. + Updated translations. ==== analitza ==== Version update (19.08.0 -> 19.08.1) Subpackages: analitza-lang libAnalitza5 - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== autoyast2 ==== Version update (4.2.7 -> 4.2.8) Subpackages: autoyast2-installation - Set X-SuSE-YaST-AutoInstResource in desktop file (bsc#144894). - 4.2.8 ==== blinken ==== Version update (19.08.0 -> 19.08.1) Subpackages: blinken-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== bovo ==== Version update (19.08.0 -> 19.08.1) Subpackages: bovo-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== cairo ==== Subpackages: libcairo-gobject2 libcairo2 libcairo2-32bit - Add 2 upstream bug fix patches: + cairo-Use-FT_Done_MM_Var-instead-of-free-when-available.patch: ft: Use FT_Done_MM_Var instead of free when available in cairo_ft_apply_variations. Fixes a crash when using freetype >= 2.9 + cairo-composite_color_glyphs.patch: Fix a thinko in composite_color_glyphs. We can't just move around the contents of the passed-in string, we need to make a copy. This was showing up as memory corruption in pango. ==== cervisia ==== Version update (19.08.0 -> 19.08.1) Subpackages: cervisia-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== cogl ==== Version update (1.22.4+20190423.9bc253e9 -> 1.22.4+8) Subpackages: cogl-lang libcogl-pango20 libcogl20 typelib-1_0-Cogl-1_0 typelib-1_0-CoglPango-1_0 - Update to version 1.22.4+8: + Add fallback for semi-private symbols in Pango. + Updated translations. - Use PARENT_TAG and TAG_OFFSET in service file. ==== cups-filters ==== - Add add-cstring-include.patch to include cstring for memcpy and strcmp ==== dnsmasq ==== - Add Fix-build-with-libnettle-3.5.patch ==== drbd ==== Subpackages: drbd-kmp-default - Restore higher summary specifity. - Drop old-age %clean, %defattr. ==== drbd-utils ==== Version update (9.9.0 -> 9.10.0) - Support Kernel 5.2, bsc#1149945 and bsc#1144702 - Add patch netlink-prepare-for-kernel-v5.2.patch Add patch netlink-Add-NLA_F_NESTED-flag-to-nested-attribute.patch - Update to 9.10.0 * drbdmon: limit desplay lenght, minor fixes * drbdsetup,v9: avoid underflow when resync regresses * drbdmeta,v9: allow huge (~1PB volumes) * drbdsetup,v9: add allow-remote-read flag(9.0.19) * docker: switch to UBI images * doc: update JA doc ==== elfutils ==== Subpackages: elfutils-lang libasm1 libdw1 libebl-plugins libelf-devel libelf1 - Modernize specfile and metadata. ==== eog-plugins ==== Version update (3.26.3 -> 3.26.4) Subpackages: eog-plugins-lang - Update to version 3.26.4: + Updated translations. ==== epiphany ==== Subpackages: epiphany-lang gnome-shell-search-provider-epiphany - Drop pkgconfig(evince-document-3.0) and pkgconfig(evince-view-3.0) BuildRequires: Not needed, nor used since version 3.31.90. ==== evince ==== Version update (3.32.0 -> 3.32.0+28) Subpackages: evince-lang evince-plugin-comicsdocument evince-plugin-djvudocument evince-plugin-dvidocument evince-plugin-pdfdocument evince-plugin-tiffdocument evince-plugin-xpsdocument libevdocument3-4 libevview3-3 nautilus-evince typelib-1_0-EvinceDocument-3_0 typelib-1_0-EvinceView-3_0 - Update to version 3.32.0+28: + sidebar links: fix popup. + require Poppler 0.76.0 for ignoreDiacritics feature. + shell: remember unmaximized window size. + EvPresentationView: don't start render job until realized. + ev-page-action-widget: disconnect notify::document signal in finalize. + backend: fix swapped y-coordinates when adding annotations. + ev_window: prevent NULL metadata being passed. + Updated translations. - Switch to source services, use checkout from gnome-3.32 stable branch. - Switch to meson buildsystem. Add meson BuildRequires and macros, as well as dropping libtool BuildRequires, no longer needed. - Replace gcc-c++ with generic c++_compiler BuildRequires. - Drop CVE-2019-11459.patch: Fixed upstream. ==== exim ==== Version update (4.92.1 -> 4.92.2) - update to exim 4.92.2 * CVE-2019-15846: fix against remote attackers executing arbitrary code as root via a trailing backslash ==== festival ==== - Use -ffat-lto-objects when building static libraries. - Run spec-cleaner ==== ffmpegthumbs ==== Version update (19.08.0 -> 19.08.1) Subpackages: ffmpegthumbs-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== file-roller ==== Version update (3.32.1 -> 3.32.2) Subpackages: file-roller-lang - Update to version 3.32.2: + Bugs fixed: Prevents CTRL+F to be activated twice for a single key press. + Updated translations. ==== findutils ==== Version update (4.6.0 -> 4.7.0) Subpackages: findutils-lang - Upgrade to 4.7.0. - findutils.spec: - Change source compression from gzip to xz. - Align comments about how to bump the version. - Activate the signature checking via *.sig and keyring files. - Remove downstream hack in %check section to make a test executable. - Delete obsolete patches: - disable-broken-tests.patch - gnulib-libio.patch - sv-bug-48030-find-exec-plus-does-not-pass-all-arguments.patch - sysmacros.patch - findutils-4.4.2-xautofs.patch: Refresh, and rename ... - findutils-xautofs.patch: ... to this. ==== flatpak-builder ==== Version update (1.0.7 -> 1.0.8) - Update to version 1.0.8: + Support multiple instances of --install-dep-from. + Ensure shallow git mirrors are updated when the git ref changes. + Improved error reporting. ==== gawk ==== - Upgrade descriptions. ==== gdk-pixbuf ==== Version update (2.38.1 -> 2.38.2) Subpackages: gdk-pixbuf-lang gdk-pixbuf-query-loaders gdk-pixbuf-query-loaders-32bit gdk-pixbuf-thumbnailer libgdk_pixbuf-2_0-0 libgdk_pixbuf-2_0-0-32bit typelib-1_0-GdkPixbuf-2_0 - Update to version 2.38.2: + build: Remove unnecessary argument. + gif: Suppress last deprecation warning. + tests: - Disable deprecation warnings for GTimeVal. - Add test for issue 95. - Add test image for invalid XPM data. + Disable deprecation warnings for GTimeVal. + Use the monotonic clock instead of wall one. + xpm: - Fail when XPM file doesn't contain enough data. - Simplify error path. - Sanity check XPM file dimensions. ==== glib2 ==== Version update (2.60.6 -> 2.60.7) Subpackages: glib2-lang glib2-tools libgio-2_0-0 libgio-2_0-0-32bit libglib-2_0-0 libglib-2_0-0-32bit libgmodule-2_0-0 libgmodule-2_0-0-32bit libgobject-2_0-0 libgobject-2_0-0-32bit libgthread-2_0-0 - Update to version 2.60.7: + Bugs fixed: glgo#GNOME/GLib#1819, glgo#GNOME/GLib#1847, glgo#GNOME/GLib!1012, glgo#GNOME/GLib!1013, glgo#GNOME/GLib!1061, glgo#GNOME/GLib!1065, glgo#GNOME/GLib!1081. ==== gspell ==== Version update (1.8.1 -> 1.8.2) Subpackages: gspell-lang libgspell-1-2 typelib-1_0-Gspell-1 - Update to version 1.8.2: + Build from Git: allow building with gettext ? 0.20. + Updated translations. ==== gthumb ==== Version update (3.8.0 -> 3.8.1) Subpackages: gthumb-lang - Update to version 3.8.1: + Bugs fixed: Selections: fixed possible crash after reordering the files. + Updated translations. ==== gtk3 ==== Version update (3.24.10 -> 3.24.11) Subpackages: gtk3-data gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-tigrigna gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-lang gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Update to version 3.24.11: + Adwaita: - Add drop shadow to icons. - Small color fixes. - Make title buttons round. + Wayland: - Support xdg-output v3. - Fix clipboard ownership handling. + X11: Improve monitor metadata. + Build: Require GLib 2.57.2. + Updated translations. ==== i4l-base ==== Subpackages: i4l-isdnlog libcapi20-3 - Use -ffat-lto-objects when building static libraries. ==== ibus ==== Subpackages: ibus-gtk ibus-gtk-32bit ibus-gtk3 ibus-lang libibus-1_0-5 libibus-1_0-5-32bit typelib-1_0-IBus-1_0 - Apply the change on Jun. 22 again, reverted by the previous change - Stop exporting OOO_FORCE_DESKTOP (boo#1042136) * KDE4 LibreOffice VCL plugin was removed from upstream * New KDE5/Qt5 VCL plugin supporting Qt IM Module will be available * Note only LibreOffice KDE5/Qt5 >= 6.3 supports Qt IM module - For older version, please export OOO_FORCE_DESKTOP=gnome in ~/.profile ==== iio-sensor-proxy ==== Version update (2.7 -> 2.8) - Update to version 2.8: + Add support for accelerometers in ChromeBooks. + Fix screen orientation in favour of portrait when rotating display instead of favouring the previous orientation. ==== inn ==== - Use -ffat-lto-objects when building static libraries. ==== juk ==== Version update (19.08.0 -> 19.08.1) Subpackages: juk-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Ensure CollectionList cache is saved on shutdown. ==== k3b ==== Version update (19.08.0 -> 19.08.1) Subpackages: k3b-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Fix taglib includes to match the way taglib was meant to be used: #include <tag.h> ==== kalgebra ==== Version update (19.08.0 -> 19.08.1) Subpackages: kalgebra-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kalzium ==== Version update (19.08.0 -> 19.08.1) Subpackages: kalzium-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kanagram ==== Version update (19.08.0 -> 19.08.1) Subpackages: kanagram-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kapptemplate ==== Version update (19.08.0 -> 19.08.1) Subpackages: kapptemplate-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== katomic ==== Version update (19.08.0 -> 19.08.1) Subpackages: katomic-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kblackbox ==== Version update (19.08.0 -> 19.08.1) Subpackages: kblackbox-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kblocks ==== Version update (19.08.0 -> 19.08.1) Subpackages: kblocks-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kbounce ==== Version update (19.08.0 -> 19.08.1) Subpackages: kbounce-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kbreakout ==== Version update (19.08.0 -> 19.08.1) Subpackages: kbreakout-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kbruch ==== Version update (19.08.0 -> 19.08.1) Subpackages: kbruch-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kcachegrind ==== Version update (19.08.0 -> 19.08.1) Subpackages: kcachegrind-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kcron ==== Version update (19.08.0 -> 19.08.1) Subpackages: kcron-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kde-print-manager ==== Version update (19.08.0 -> 19.08.1) Subpackages: kde-print-manager-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * try to find the smb backend for cups as runtime dependency ==== kdeedu-data ==== Version update (19.08.0 -> 19.08.1) - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kdegraphics-thumbnailers ==== Version update (19.08.0 -> 19.08.1) - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kdenetwork-filesharing ==== Version update (19.08.0 -> 19.08.1) Subpackages: kdenetwork-filesharing-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kdf ==== Version update (19.08.0 -> 19.08.1) Subpackages: kdf-lang kwikdisk - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kdiamond ==== Version update (19.08.0 -> 19.08.1) Subpackages: kdiamond-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kernel-firmware ==== Version update (20190815 -> 20190827) Subpackages: ucode-amd - Update to version 20190827 (git-commit 7307a29961ad): * brcm: Add 43455 based AP6255 NVRAM for the Minix Neo Z83-4 Mini PC * brcm: Add 43340 based AP6234 NVRAM for the PoV TAB-P1006W-232 tablet * iwlwifi: update FWs to core45-152 release * check_whence: Add copy-firmware.sh to the list of ignored files * rtl_bt: Update RTL8822C BT FW to V0x098A_94A4 * linux-firmware: Update firmware file for Intel Bluetooth AX200 * linux-firmware: Update firmware file for Intel Bluetooth AX201 * linux-firmware: Update firmware file for Intel Bluetooth 9560 * linux-firmware: Update firmware file for Intel Bluetooth 9260 * Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886 ==== kernel-source ==== Version update (5.2.11 -> 5.2.14) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms kernel-vanilla - Linux 5.2.14 (bnc#1012628). - Revert "mmc: core: do not retry CMD6 in __mmc_switch()" (bnc#1012628). - x86/boot: Preserve boot_params.secure_boot from sanitizing (bnc#1012628). - Revert "x86/apic: Include the LDR when clearing out APIC registers" (bnc#1012628). - libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer (bnc#1012628). - x86/boot/compressed/64: Fix missing initialization in find_trampoline_placement() (bnc#1012628). - KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity (bnc#1012628). - gpio: Fix irqchip initialization order (bnc#1012628). - RDMA/bnxt_re: Fix stack-out-of-bounds in bnxt_qplib_rcfw_send_message (bnc#1012628). - afs: use correct afs_call_type in yfs_fs_store_opaque_acl2 (bnc#1012628). - afs: Fix possible oops in afs_lookup trace event (bnc#1012628). - afs: Fix leak in afs_lookup_cell_rcu() (bnc#1012628). - KVM: arm/arm64: Only skip MMIO insn once (bnc#1012628). - ceph: fix buffer free while holding i_ceph_lock in fill_inode() (bnc#1012628). - ceph: fix buffer free while holding i_ceph_lock in __ceph_build_xattrs_blob() (bnc#1012628). - ceph: fix buffer free while holding i_ceph_lock in __ceph_setxattr() (bnc#1012628). - drm/amdgpu: prevent memory leaks in AMDGPU_CS ioctl (bnc#1012628). - selftests/kvm: make platform_info_test pass on AMD (bnc#1012628). - selftests: kvm: fix state save/load on processors without XSAVE (bnc#1012628). - infiniband: hfi1: fix memory leaks (bnc#1012628). - infiniband: hfi1: fix a memory leak bug (bnc#1012628). - IB/mlx4: Fix memory leaks (bnc#1012628). - RDMA/cma: fix null-ptr-deref Read in cma_cleanup (bnc#1012628). - nvme: Fix cntlid validation when not using NVMEoF (bnc#1012628). - nvme-multipath: fix possible I/O hang when paths are updated (bnc#1012628). - Tools: hv: kvp: eliminate 'may be used uninitialized' warning (bnc#1012628). - Input: hyperv-keyboard: Use in-place iterator API in the channel callback (bnc#1012628). - scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQ (bnc#1012628). - x86/boot/compressed/64: Fix boot on machines with broken E820 table (bnc#1012628). - HID: cp2112: prevent sleeping function called from invalid context (bnc#1012628). - HID: intel-ish-hid: ipc: add EHL device id (bnc#1012628). - kprobes: Fix potential deadlock in kprobe_optimizer() (bnc#1012628). - sched/core: Schedule new worker even if PI-blocked (bnc#1012628). - ravb: Fix use-after-free ravb_tstamp_skb (bnc#1012628). - wimax/i2400m: fix a memory leak bug (bnc#1012628). - net: cavium: fix driver name (bnc#1012628). - ibmvnic: Unmap DMA address of TX descriptor buffers after use (bnc#1012628). - net: kalmia: fix memory leaks (bnc#1012628). - cx82310_eth: fix a memory leak bug (bnc#1012628). - vfs: fix page locking deadlocks when deduping files (bnc#1012628). - lan78xx: Fix memory leaks (bnc#1012628). - clk: Fix potential NULL dereference in clk_fetch_parent_index() (bnc#1012628). - clk: Fix falling back to legacy parent string matching (bnc#1012628). - net: myri10ge: fix memory leaks (bnc#1012628). - liquidio: add cleanup in octeon_setup_iq() (bnc#1012628). - selftests: kvm: fix vmx_set_nested_state_test (bnc#1012628). - selftests: kvm: provide common function to enable eVMCS (bnc#1012628). - selftests: kvm: do not try running the VM in vmx_set_nested_state_test (bnc#1012628). - cxgb4: fix a memory leak bug (bnc#1012628). - scsi: target: tcmu: avoid use-after-free after command timeout (bnc#1012628). - scsi: qla2xxx: Fix gnl.l memory leak on adapter init failure (bnc#1012628). - drm/mediatek: set DMA max segment size (bnc#1012628). - drm/mediatek: use correct device to import PRIME buffers (bnc#1012628). - netfilter: nft_flow_offload: skip tcp rst and fin packets (bnc#1012628). - gpio: Fix build error of function redefinition (bnc#1012628). - ibmveth: Convert multicast list size for little-endian system (bnc#1012628). - s390/qeth: serialize cmd reply with concurrent timeout (bnc#1012628). - Bluetooth: hci_qca: Send VS pre shutdown command (bnc#1012628). - Bluetooth: btqca: Add a short delay before downloading the NVM (bnc#1012628). - net: tc35815: Explicitly check NET_IP_ALIGN is not zero in tc35815_rx (bnc#1012628). - hv_netvsc: Fix a warning of suspicious RCU usage (bnc#1012628). - ixgbe: fix possible deadlock in ixgbe_service_task() (bnc#1012628). - tools: bpftool: fix error message (prog -> object) (bnc#1012628). - netfilter: nf_flow_table: teardown flow timeout race (bnc#1012628). - netfilter: nf_flow_table: conntrack picks up expired flows (bnc#1012628). - netfilter: nf_tables: use-after-free in failing rule with bound set (bnc#1012628). - net: tundra: tsi108: use spin_lock_irqsave instead of spin_lock_irq in IRQ context (bnc#1012628). - clk: samsung: exynos542x: Move MSCL subsystem clocks to its sub-CMU (bnc#1012628). - clk: samsung: exynos5800: Move MAU subsystem clocks to MAU sub-CMU (bnc#1012628). - clk: samsung: Change signature of exynos5_subcmus_init() function (bnc#1012628). - net/mlx5e: Fix error flow of CQE recovery on tx reporter (bnc#1012628). - netfilter: nf_flow_table: fix offload for flows that are subject to xfrm (bnc#1012628). - libbpf: set BTF FD for prog only when there is supported .BTF.ext data (bnc#1012628). - libbpf: fix erroneous multi-closing of BTF FD (bnc#1012628). - batman-adv: Fix netlink dumping of all mcast_flags buckets (bnc#1012628). - net/rds: Fix info leak in rds6_inc_info_copy() (bnc#1012628). - net/sched: pfifo_fast: fix wrong dereference when qdisc is reset (bnc#1012628). - net/sched: pfifo_fast: fix wrong dereference in pfifo_fast_enqueue (bnc#1012628). - net: dsa: tag_8021q: Future-proof the reserved fields in the custom VID (bnc#1012628). - Add genphy_c45_config_aneg() function to phy-c45.c (bnc#1012628). - net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate (bnc#1012628). - taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte (bnc#1012628). - taprio: Fix kernel panic in taprio_destroy (bnc#1012628). - r8152: remove calling netif_napi_del (bnc#1012628). - Revert "r8152: napi hangup fix after disconnect" (bnc#1012628). - nfp: flower: handle neighbour events on internal ports (bnc#1012628). - nfp: flower: prevent ingress block binds on internal ports (bnc#1012628). - tcp: remove empty skb from write queue in error cases (bnc#1012628). - tcp: inherit timestamp on mtu probe (bnc#1012628). - net: stmmac: dwmac-rk: Don't fail if phy regulator is absent (bnc#1012628). - net_sched: fix a NULL pointer deref in ipt action (bnc#1012628). - net: sched: act_sample: fix psample group handling on overwrite (bnc#1012628). - net: fix skb use after free in netpoll (bnc#1012628). - mld: fix memory leak in mld_del_delrec() (bnc#1012628). - commit af75f09 - config: enable SLAB_FREELIST_HARDENED (bsc#1127808) Enable SLAB_FREELIST_HARDENED on all architectures. This obscures the free object pointer on a per-cache basis making it more difficult to locate kernel objects via exploits probing the cache metadata. This change was requested by the upstream openSUSE community to make the kernel more resistent to slab freelist attacks. Tests conducted by the kernel performance teams confirmed that the performance impact is detectable but negligible. - commit 94938f2 - rpm/constraints.in: lower disk space required for ARM With a requirement of 35GB, only 2 slow workers are usable for ARM. Current aarch64 build requires 27G and armv6/7 requires 14G. Set requirements respectively to 30GB and 20GB. - commit f84c163 - config: enable STACKPROTECTOR_STRONG also on armv6hl Recently reenabled armv6hl architecture has STACKPROTECTOR_STRONG disabled, enable it here as well. - commit f434a32 - Linux 5.2.13 (bnc#1012628). - Revert "Input: elantech - enable SMBus on new (2018+) systems" (bnc#1012628). - commit acd8e88 - Linux 5.2.12 (bnc#1012628). - dmaengine: ste_dma40: fix unneeded variable warning (bnc#1012628). - nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns (bnc#1012628). - afs: Fix the CB.ProbeUuid service handler to reply correctly (bnc#1012628). - afs: Fix loop index mixup in afs_deliver_vl_get_entry_by_name_u() (bnc#1012628). - fs: afs: Fix a possible null-pointer dereference in afs_put_read() (bnc#1012628). - afs: Fix off-by-one in afs_rename() expected data version calculation (bnc#1012628). - afs: Only update d_fsdata if different in afs_d_revalidate() (bnc#1012628). - afs: Fix missing dentry data version updating (bnc#1012628). - nvmet: Fix use-after-free bug when a port is removed (bnc#1012628). - nvmet-loop: Flush nvme_delete_wq when removing the port (bnc#1012628). - nvmet-file: fix nvmet_file_flush() always returning an error (bnc#1012628). - nvme-core: Fix extra device_put() call on error path (bnc#1012628). - nvme: fix a possible deadlock when passthru commands sent to a multipath device (bnc#1012628). - nvme-rdma: fix possible use-after-free in connect error flow (bnc#1012628). - nvme: fix controller removal race with scan work (bnc#1012628). - nvme-pci: Fix async probe remove race (bnc#1012628). - soundwire: cadence_master: fix register definition for SLAVE_STATE (bnc#1012628). - soundwire: cadence_master: fix definitions for INTSTAT0/1 (bnc#1012628). - auxdisplay: panel: need to delete scan_timer when misc_register fails in panel_attach (bnc#1012628). - btrfs: trim: Check the range passed into to prevent overflow (bnc#1012628). - IB/mlx5: Fix implicit MR release flow (bnc#1012628). - dmaengine: stm32-mdma: Fix a possible null-pointer dereference in stm32_mdma_irq_handler() (bnc#1012628). - omap-dma/omap_vout_vrfb: fix off-by-one fi value (bnc#1012628). - iommu/dma: Handle SG length overflow better (bnc#1012628). - dma-direct: don't truncate dma_required_mask to bus addressing capabilities (bnc#1012628). - usb: gadget: composite: Clear "suspended" on reset/disconnect (bnc#1012628). - usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt (bnc#1012628). - habanalabs: fix DRAM usage accounting on context tear down (bnc#1012628). - habanalabs: fix endianness handling for packets from user (bnc#1012628). - habanalabs: fix completion queue handling when host is BE (bnc#1012628). - habanalabs: fix endianness handling for internal QMAN submission (bnc#1012628). - habanalabs: fix device IRQ unmasking for BE host (bnc#1012628). - xen/blkback: fix memory leaks (bnc#1012628). - arm64: cpufeature: Don't treat granule sizes as strict (bnc#1012628). - riscv: fix flush_tlb_range() end address for flush_tlb_page() (bnc#1012628). - i2c: rcar: avoid race when unregistering slave client (bnc#1012628). - i2c: emev2: avoid race when unregistering slave client (bnc#1012628). - drm/scheduler: use job count instead of peek (bnc#1012628). - drm/ast: Fixed reboot test may cause system hanged (bnc#1012628). - usb: host: fotg2: restart hcd after port reset (bnc#1012628). - tools: hv: fixed Python pep8/flake8 warnings for lsvmbus (bnc#1012628). - tools: hv: fix KVP and VSS daemons exit code (bnc#1012628). - locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty (bnc#1012628). - lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop (bnc#1012628). - watchdog: bcm2835_wdt: Fix module autoload (bnc#1012628). - selftests/bpf: install files test_xdp_vlan.sh (bnc#1012628). - drm/bridge: tfp410: fix memleak in get_modes() (bnc#1012628). - mt76: usb: fix rx A-MSDU support (bnc#1012628). - ipv6/addrconf: allow adding multicast addr if IFA_F_MCAUTOJOIN is set (bnc#1012628). - ipv6: Fix return value of ipv6_mc_may_pull() for malformed packets (bnc#1012628). - net: cpsw: fix NULL pointer exception in the probe error path (bnc#1012628). - net: fix __ip_mc_inc_group usage (bnc#1012628). - net/smc: make sure EPOLLOUT is raised (bnc#1012628). - tcp: make sure EPOLLOUT wont be missed (bnc#1012628). - ipv4: mpls: fix mpls_xmit for iptunnel (bnc#1012628). - openvswitch: Fix conntrack cache with timeout (bnc#1012628). - ipv4/icmp: fix rt dst dev null pointer dereference (bnc#1012628). - xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode (bnc#1012628). - mm/zsmalloc.c: fix build when CONFIG_COMPACTION=n (bnc#1012628). - ALSA: usb-audio: Check mixer unit bitmap yet more strictly (bnc#1012628). - ALSA: hda/ca0132 - Add new SBZ quirk (bnc#1012628). - ALSA: line6: Fix memory leak at line6_init_pcm() error path (bnc#1012628). - ALSA: hda - Fixes inverted Conexant GPIO mic mute led (bnc#1012628). - ALSA: seq: Fix potential concurrent access to the deleted pool (bnc#1012628). - ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate() (bnc#1012628). - ALSA: usb-audio: Add implicit fb quirk for Behringer UFX1604 (bnc#1012628). - kvm: x86: skip populating logical dest map if apic is not sw enabled (bnc#1012628). - KVM: x86: hyper-v: don't crash on KVM_GET_SUPPORTED_HV_CPUID when kvm_intel.nested is disabled (bnc#1012628). - KVM: x86: Don't update RIP or do single-step on faulting emulation (bnc#1012628). - uprobes/x86: Fix detection of 32-bit user mode (bnc#1012628). - x86/mm/cpa: Prevent large page split when ftrace flips RW on kernel text (bnc#1012628). - x86/apic: Do not initialize LDR and DFR for bigsmp (bnc#1012628). - x86/apic: Include the LDR when clearing out APIC registers (bnc#1012628). - HID: logitech-hidpp: remove support for the G700 over USB (bnc#1012628). - ftrace: Fix NULL pointer dereference in t_probe_next() (bnc#1012628). - ftrace: Check for successful allocation of hash (bnc#1012628). - ftrace: Check for empty hash and comment the race with registering probes (bnc#1012628). - usbtmc: more sanity checking for packet size (bnc#1012628). - usb-storage: Add new JMS567 revision to unusual_devs (bnc#1012628). - USB: cdc-wdm: fix race between write and disconnect due to flag abuse (bnc#1012628). - usb: hcd: use managed device resources (bnc#1012628). - usb: chipidea: udc: don't do hardware access if gadget has stopped (bnc#1012628). - usb: host: ohci: fix a race condition between shutdown and irq (bnc#1012628). - usb: host: xhci: rcar: Fix typo in compatible string matching (bnc#1012628). - USB: storage: ums-realtek: Update module parameter description for auto_delink_en (bnc#1012628). - USB: storage: ums-realtek: Whitelist auto-delink support (bnc#1012628). - tools/power turbostat: Fix caller parameter of get_tdp_amd() (bnc#1012628). - KVM: PPC: Book3S: Fix incorrect guest-to-user-translation error handling (bnc#1012628). - KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long (bnc#1012628). - KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI (bnc#1012628). - mei: me: add Tiger Lake point LP device ID (bnc#1012628). - Revert "mmc: sdhci-tegra: drop ->get_ro() implementation" (bnc#1012628). - mmc: sdhci-of-at91: add quirk for broken HS200 (bnc#1012628). - mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressing (bnc#1012628). - mmc: core: Fix init of SD cards reporting an invalid VDD range (bnc#1012628). - mmc: sdhci-sprd: fixed incorrect clock divider (bnc#1012628). - mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN (bnc#1012628). - stm class: Fix a double free of stm_source_device (bnc#1012628). - intel_th: pci: Add support for another Lewisburg PCH (bnc#1012628). - intel_th: pci: Add Tiger Lake support (bnc#1012628). - typec: tcpm: fix a typo in the comparison of pdo_max_voltage (bnc#1012628). - fsi: scom: Don't abort operations for minor errors (bnc#1012628). - lkdtm/bugs: fix build error in lkdtm_EXHAUST_STACK (bnc#1012628). - NFSv4/pnfs: Fix a page lock leak in nfs_pageio_resend() (bnc#1012628). - NFS: Ensure O_DIRECT reports an error if the bytes read/written is 0 (bnc#1012628). - Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated" (bnc#1012628). - lib: logic_pio: Fix RCU usage (bnc#1012628). - lib: logic_pio: Avoid possible overlap for unregistering regions (bnc#1012628). - lib: logic_pio: Add logic_pio_unregister_range() (bnc#1012628). - drm/amdgpu: Add APTX quirk for Dell Latitude 5495 (bnc#1012628). - drm/amdgpu: fix GFXOFF on Picasso and Raven2 (bnc#1012628). - drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guest (bnc#1012628). - drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe() (bnc#1012628). - i2c: piix4: Fix port selection for AMD Family 16h Model 30h (bnc#1012628). - bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free (bnc#1012628). - bus: hisi_lpc: Add .remove method to avoid driver unbind crash (bnc#1012628). - VMCI: Release resource if the work is already queued (bnc#1012628). - crypto: ccp - Ignore unconfigured CCP device on suspend/resume (bnc#1012628). - SUNRPC: Don't handle errors if the bind/connect succeeded (bnc#1012628). - mt76: mt76x0u: do not reset radio on resume (bnc#1012628). - mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION (bnc#1012628). - mm, memcg: partially revert "mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones" (bnc#1012628). - mm: memcontrol: fix percpu vmstats and vmevents flush (bnc#1012628). - Revert "cfg80211: fix processing world regdomain when non modular" (bnc#1012628). - mac80211: fix possible sta leak (bnc#1012628). - cfg80211: Fix Extended Key ID key install checks (bnc#1012628). - mac80211: Don't memset RXCB prior to PAE intercept (bnc#1012628). - mac80211: Correctly set noencrypt for PAE frames (bnc#1012628). - mmc: sdhci-sprd: clear the UHS-I modes read from registers (bnc#1012628). - mmc: sdhci-sprd: Implement the get_max_timeout_count() interface (bnc#1012628). - mmc: sdhci-sprd: add get_ro hook function (bnc#1012628). - iwlwifi: add new cards for 22000 and fix struct name (bnc#1012628). - iwlwifi: add new cards for 22000 and change wrong structs (bnc#1012628). - iwlwifi: add new cards for 9000 and 20000 series (bnc#1012628). - iwlwifi: change 0x02F0 fw from qu to quz (bnc#1012628). - iwlwifi: pcie: add support for qu c-step devices (bnc#1012628). - iwlwifi: pcie: don't switch FW to qnj when ax201 is detected (bnc#1012628). - iwlwifi: pcie: handle switching killer Qu B0 NICs to C0 (bnc#1012628). - drm/i915: Do not create a new max_bpc prop for MST connectors (bnc#1012628). - drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->type (bnc#1012628). - bpf: fix use after free in prog symbol exposure (bnc#1012628). - hsr: implement dellink to clean up resources (bnc#1012628). - hsr: fix a NULL pointer deref in hsr_dev_xmit() (bnc#1012628). - hsr: switch ->dellink() to ->ndo_uninit() (bnc#1012628). - Revert "ASoC: Fail card instantiation if DAI format setup fails" (bnc#1012628). - commit bb4c31d - powerpc/tm: Fix restoring FP/VMX facility incorrectly on interrupts (CVE-2019-15031 bsc#1149713). - powerpc/tm: Fix FP/VMX unavailable exceptions inside a transaction (CVE-2019-15030 bsc#1149713). - commit 76a34af - x86/ptrace: fix up botched merge of spectrev1 fix (bnc#1149376 CVE-2019-15902). - commit 77497b6 - config: enable STACKPROTECTOR_STRONG (jsc#SLE-9120 bsc#1130365) Enable CONFIG_STACKPROTECTOR_STRONG on all architectures except s390x (where the feature is not available). This extends the number of functions which are protected by "stack canary" check to catch functions writing past their stack frame. This change was requested by SUSE security to make our kernels more resistant to some types of stack overflow attacks. Tests performed by kernel performance teams confirmed that performance impact is acceptable. - commit d6e8aab ==== kgeography ==== Version update (19.08.0 -> 19.08.1) Subpackages: kgeography-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kget ==== Version update (19.08.0 -> 19.08.1) Subpackages: kget-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kgoldrunner ==== Version update (19.08.0 -> 19.08.1) Subpackages: kgoldrunner-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== khangman ==== Version update (19.08.0 -> 19.08.1) Subpackages: khangman-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kig ==== Version update (19.08.0 -> 19.08.1) Subpackages: kig-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kimagemapeditor ==== Version update (19.08.0 -> 19.08.1) Subpackages: kimagemapeditor-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kipi-plugins ==== Version update (19.08.0 -> 19.08.1) Subpackages: kipi-plugins-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kiriki ==== Version update (19.08.0 -> 19.08.1) Subpackages: kiriki-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kiten ==== Version update (19.08.0 -> 19.08.1) Subpackages: fonts-KanjiStrokeOrders kiten-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kjumpingcube ==== Version update (19.08.0 -> 19.08.1) Subpackages: kjumpingcube-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== klines ==== Version update (19.08.0 -> 19.08.1) Subpackages: klines-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kmahjongg ==== Version update (19.08.0 -> 19.08.1) Subpackages: kmahjongg-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kmines ==== Version update (19.08.0 -> 19.08.1) Subpackages: kmines-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kmouth ==== Version update (19.08.0 -> 19.08.1) Subpackages: kmouth-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kmplot ==== Version update (19.08.0 -> 19.08.1) Subpackages: kmplot-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== knavalbattle ==== Version update (19.08.0 -> 19.08.1) Subpackages: knavalbattle-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== knetwalk ==== Version update (19.08.0 -> 19.08.1) Subpackages: knetwalk-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kolf ==== Version update (19.08.0 -> 19.08.1) Subpackages: kolf-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kollision ==== Version update (19.08.0 -> 19.08.1) Subpackages: kollision-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kolourpaint ==== Version update (19.08.0 -> 19.08.1) Subpackages: kolourpaint-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Fix crash when doing open recent ==== konquest ==== Version update (19.08.0 -> 19.08.1) Subpackages: konquest-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kpat ==== Version update (19.08.0 -> 19.08.1) Subpackages: kpat-lang - Add FcSolveSolver-cleanup-ressources.patch to fix crashes due to resource exhaustion (boo#1146622, kde#395624) - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kqtquickcharts ==== Version update (19.08.0 -> 19.08.1) - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kreversi ==== Version update (19.08.0 -> 19.08.1) Subpackages: kreversi-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== krita ==== Version update (4.2.5 -> 4.2.6) Subpackages: krita-lang - Update to 4.2.6: * See https://krita.org/en/item/krita-4-2-6-released/ * Add new layer from visible to layer right-click context menu * Allow selection overlay to be reset to default (kde#410470) * Set date for bundle creation to use ISO-Date (kde#410490) * Fix freeze with 32bit float tiff by using our own tiff reader for the thumbnails (kde#408731) * Ensure filter mask button is disabled appropriately depending on whether the filter supports it (kde#410374) * Enable the small color selector if opengles is available as well (kde#410602) * Ensure that checkboxes are shown in menus even when using the fusion theme * Isolate Layer Crash (kde#408785) * Properly fix font resetting when all the text in the editor removed (kde#409243) * Fix lags in Move Tool when using tablet device (kde#410838) * Fix Shift and Alt modifiers in Outline Selection Tool (kde#410532) * Ensure Convert group to Animated Layer shows text in the toolbar (kde#410500) * Allow 'Add Clone Layer' to Work on Multiple Layers (kde#373338) * Fix saving animated transparency masks created through conversion (kde#409895) * Partially fix the curve change despite 'Share curve across all settings' checked (kde#383909) * Try harder to make sure that the swap location is writable * Properly handle timezones in bundles * Make sure all the settings dialogs pages are always shown in the same order * Make the settings dialog fit in low-res screens (kde#410793) * Remove misleading 'px' suffix for 'move amount' shortcut setting * Make string for reasons for image export problems translatable (kde#406973) * Fix crash when creating a bezier curve (kde#410572) * Fix deadlocks in KoShapeManager (kde#410909, kde#410572) * Fix a deadlock when using broken Wacom drivers on Linux (kde#410797) * Fix absolute brush rotation on rotated canvas (kde#292726) * Fix deadlock when removing reference image (kde#411212) * Fix a deadlock in handling of vector objects (kde#411365) * Fix autosave saving only once (kde#411631) ==== kshisen ==== Version update (19.08.0 -> 19.08.1) Subpackages: kshisen-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== ksirk ==== Version update (19.08.0 -> 19.08.1) Subpackages: ksirk-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kspaceduel ==== Version update (19.08.0 -> 19.08.1) Subpackages: kspaceduel-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== ksquares ==== Version update (19.08.0 -> 19.08.1) Subpackages: ksquares-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== ksudoku ==== Version update (19.08.0 -> 19.08.1) Subpackages: ksudoku-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== ksystemlog ==== Version update (19.08.0 -> 19.08.1) Subpackages: ksystemlog-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kteatime ==== Version update (19.08.0 -> 19.08.1) Subpackages: kteatime-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== ktimer ==== Version update (19.08.0 -> 19.08.1) Subpackages: ktimer-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== ktuberling ==== Version update (19.08.0 -> 19.08.1) Subpackages: ktuberling-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kturtle ==== Version update (19.08.0 -> 19.08.1) Subpackages: kturtle-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kubrick ==== Version update (19.08.0 -> 19.08.1) Subpackages: kubrick-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== kvm_stat ==== Version update (5.2.5 -> 5.2.13) - Detect SLE15-SP2 / Leap 15.2 and patch accordingly ==== kwordquiz ==== Version update (19.08.0 -> 19.08.1) Subpackages: kwordquiz-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Remove unused private field 'm_column' * Do not crash on exit ==== libXpresent ==== - Add -ffat-lto-objects to _lto_cflags ==== libguestfs ==== Subpackages: guestfs-data libguestfs0 python3-libguestfs - Use -ffat-lto-objects when building static libraries. - Added lvm2 to Requires for using virt-resize of xfs images. (bsc#1138860) - Add sysconfig-netconfig to appliance (boo#1136878) Patches added: netconfig.patch ==== libkdegames ==== Version update (19.08.0 -> 19.08.1) Subpackages: kdegames-carddecks-default libkdegames-lang libkf5kdegames6 - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== libkeduvocdocument ==== Version update (19.08.0 -> 19.08.1) Subpackages: libKEduVocDocument5 libkeduvocdocument-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== libkmahjongg ==== Version update (19.08.0 -> 19.08.1) Subpackages: libKF5KMahjongglib5 libkmahjongg-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== libraw ==== - drop JPEG2000 support [bsc#1144252] - Use FAT LTO objects in order to provide proper static library. ==== librsvg ==== Version update (2.44.14 -> 2.44.15) Subpackages: gdk-pixbuf-loader-rsvg librsvg-2-2 rsvg-thumbnailer typelib-1_0-Rsvg-2_0 - Update to version 2.44.15: + Fix glgo#GNOME/librsvg#11: Respect the "direction" property for bidirectional text. + Fix glgo#GNOME/librsvg#462: Fix usage of std::f64::EPSILON for Rust 1.28. + Fix glgo#GNOME/librsvg#497: Don't panic on paths with all-invalid commands. + Fix glgo#GNOME/librsvg#496: Ensure all lengths and angles parse as finite numbers. + Fix glgo#GNOME/librsvg#426: Detect files vs. URIs in rsvg_handle_new_from_file() on Windows. + Fix a memory leak in the test suite. ==== libshout ==== Version update (2.4.1 -> 2.4.3) - Update to release 2.4.3 * Fixed building with OpenSSL 1.1.0. * Added support for PUT. * Added support for WebM and Matroska with full timing. ==== libsigc++2 ==== - Drop conditional libsigc++-std-c11.patch: No longer needed for any currently supported version of openSUSE. - Use make_build macro. ==== libuv ==== Version update (1.30.1 -> 1.31.0) - libuv 1.31.0: * unix,win: add uv_fs_statfs() * test: avoid AF_LOCAL * add ability to retrieve all env variables * doc: add %p to valgrind log-file arg * doc: fix typo in basics.rst * unix: clear UV_HANDLE_READING flag before callback - add project signing keyring and verify source signature ==== libvirt ==== Version update (5.6.0 -> 5.7.0) Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-gluster libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - Add apparmor-abstractions as a required package for daemon bsc#1142992 - Update to libvirt 5.7.0 - Experimental split of libvirtd into separate daemons - bsc#1145440, bsc#1145586 - Many incremental improvements and bug fixes, see https://libvirt.org/news.html - Dropped patches: 93c1d5fe-network-fix-ability-to-use-openvswitch-with-vlans.patch, blockcopy-check-dst-identical-device.patch, suse-libvirtd-service-xen.patch ==== libxml2 ==== Subpackages: libxml2-2 libxml2-2-32bit libxml2-devel libxml2-tools - Do not depend on setuptools to keep the depgraph small and avoid build cycles - Use python[23]-libmxl2 as python names not python-libxml2-python which is kinda confusing - Do not ship libtool archive anymore - Enable tests also in the python subpackages - Added a new configurable variable XPATH_DEFAULT_MAX_NODESET_LENGTH to avoid nodeset limit when processing large XML files [bsc#1135123] * Added libxml2-make-XPATH_MAX_NODESET_LENGTH-configurable.patch - Merge python-libxml2-python spec and changes files into the libxml2 ones using _multibuild [bsc#1126499, bsc#1123919] ==== lokalize ==== Version update (19.08.0 -> 19.08.1) Subpackages: lokalize-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Fix unittest: Calcutta -> Kolkata * Use QTEST_GUILESS_MAIN for tests * Fix Breton plural line ==== lskat ==== Version update (19.08.0 -> 19.08.1) Subpackages: lskat-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== makedumpfile ==== Version update (1.6.5 -> 1.6.6) - makedumpfile-Increase-SECTION_MAP_LAST_BIT-to-4.patch: Increase SECTION_MAP_LAST_BIT to 4 (bsc#1144708). - Update to 1.6.6 * Support for AMD Secure Memory Encryption * Exclude pages that are logically offline * Support kernels up to 5.1.9 - Drop makedumpfile-coptflags.diff. ==== mariadb ==== Subpackages: libmariadbd19 mariadb-client mariadb-errormessages - Use <memory> instead of <physicalmemory> for _constraints, increasing the worker pool on x86_64 from 6 to >700. ==== mbox-importer ==== Version update (19.08.0 -> 19.08.1) Subpackages: mbox-importer-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== multipath-tools ==== Version update (0.8.2+26+suse.d884195 -> 0.8.2+27+suse.3ff280b) Subpackages: kpartx libmpath0 - Update to version 0.8.2+27+suse.3ff280b: * Added upstream patch to fix premature path reinstantiation with san_path_err_XX (boo#1149319) ==== netpbm ==== Subpackages: libnetpbm11 - bsc#1144255 - Drop jasper dependency from netpbm due to removal of jasper. Disables JPEG2000 support and stops shipping programs like pamtojpeg2k and jpeg2ktopam - Add netpbm-disable-jasper.patch ==== ocfs2-tools ==== - Use -ffat-lto-objects when building static libraries. ==== opencv3 ==== - Avoid use of ®/? signs in specfiles as per guidelines. - Reenable LTO again, fixed in GCC upstream: https://gcc.gnu.org/PR91231 - Disable lto to work around an internal compiler error (boo#1142656) ==== parley ==== Version update (19.08.0 -> 19.08.1) Subpackages: parley-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Use QTEST_GUILESS_MAIN for testentry test ==== patterns-base ==== Subpackages: patterns-base-apparmor patterns-base-base patterns-base-basesystem patterns-base-basic_desktop patterns-base-console patterns-base-documentation patterns-base-enhanced_base patterns-base-minimal_base patterns-base-sw_management patterns-base-transactional_base patterns-base-x11 patterns-base-x11_enhanced - minimal_base: remove dracut. Only useful when there is also a kernel and the kernel requires it anyways. - base: * remove bootloader packages. They are only required on real hardware or VMs. YaST will add them. * remove btrfsprogs. Has supplemements on btrfs so will be auto installed when on btrfs. Also yast installs it. * remove snapper (supplements btrfsprogs) * move openssh to enhanced_base - enhanced_base: * iproute2 already in minimal_base * remove explicit grub and plymouth branding. They are pulled via supplements - documentation: * remove info2html, old tool not useful today. * susehelp and sled manuals no longer exist * Use minimal_base as Basesystem is just an alias - sw_management: * require zypper also on TW ==== patterns-desktop ==== Subpackages: patterns-desktop-books patterns-desktop-imaging patterns-desktop-laptop patterns-desktop-multimedia patterns-desktop-technical_writing - merge _opt patterns into main patterns ==== perl-Glib ==== Version update (1.328 -> 1.3291) - Removed patch fixed upstream: * perl-Glib-1.328-glib2.59-comment-linebreaks.patch - updated to 1.3291 see /usr/share/doc/packages/perl-Glib/ChangeLog.pre-git - Add patch and glib2-devel dependency to cpanspec.yml - updated to 1.329 see /usr/share/doc/packages/perl-Glib/ChangeLog.pre-git ==== perl-HTML-Clean ==== Version update (0.9 -> 1.2) - Spell corrections in description section - updated to 1.2 see /usr/share/doc/packages/perl-HTML-Clean/Changes 1.2 Tue Sep 9 13:56 MSK 2019 - Fix pod 1.1 Tue Sep 9 12:30 MSK 2019 - Fix pod. Add github repository ==== perl-Mojolicious ==== Version update (8.23 -> 8.24) - updated to 8.24 see /usr/share/doc/packages/perl-Mojolicious/Changes 8.24 2019-09-11 - Added EXPERIMENTAL context method to Mojo::Log. - Added EXPERIMENTAL cleanup event to Mojo::IOLoop::Subprocess. - Added log helper to Mojolicious::Plugin::DefaultHelpers. - Improved log messages generated by Mojolicious to include request ids when possible ==== perl-XML-Parser ==== - Add cpanspec.yml file - Remove not needed files in doc section [bsc#1146634] - Fix permissions in samples directory - Updated spec file with spec-celaner - Use https and metacpan release ==== permissions ==== Version update (1550_20190711 -> 1550_20190830) Subpackages: chkstat permissions-config permissions-doc - Update to version 20190830: * dumpcap: remove 'other' executable bit because of capabilities (boo#1148788, CVE-2019-3687) - Update to version 20190829: * add one more missing slash for icinga2 * fix more missing slashes for directories - Update to version 20190820: * cron directory permissions: add slashes ==== pim-data-exporter ==== Version update (19.08.0 -> 19.08.1) Subpackages: pim-data-exporter-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Remove debug ==== pim-sieve-editor ==== Version update (19.08.0 -> 19.08.1) Subpackages: pim-sieve-editor-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== polkit-default-privs ==== Version update (13.2+20190806.841a06b -> 13.2+20190905.0016c47) - Update to version 13.2+20190905.0016c47: * whitelist new systemd-resolved actions (bnc#1149216) - Update to version 13.2+20190827.0cc2a82: * make new systemd rules more restrictive (boo#1146300, boo#1145639) - Update to version 13.2+20190823.a5f89c3: * systemd-networkd (boo#1146300) * systemd-portabled (boo#1145639) ==== python-libvirt-python ==== Version update (5.6.0 -> 5.7.0) - Update to 5.7.0 - Add all new APIs and constants in libvirt 5.7.0 ==== python-pygit2 ==== Version update (0.28.1 -> 0.28.2) - Update to 0.28.2: * Fix crash in reflog iteration #901 * Support symbolic references in branches.with_commit(..) #910 * Documentation updates #909 * Test updates #911 ==== rpm-config-SUSE ==== Version update (0.g32 -> 0.g35) - Update to version 0.g35: * Add _distconfdir as /usr/etc * find-provides.ksyms, find-requires.ksyms: cleanup kernel version handling (bsc#1145601). * find-requires.ksyms: fix matching of uninstalled files (bsc#1145601). * add changes ==== rubygem-packaging_rake_tasks ==== Version update (1.4.9 -> 1.4.10) - Unified spec_version (bsc#1149618) - 1.4.10 ==== rubygem-sassc ==== Version update (2.1.0 -> 2.2.0) - updated to version 2.2.0 see installed CHANGELOG.md ==== salt ==== Subpackages: python3-salt salt-master salt-minion - Require shadow instead of old pwdutils (bsc#1130588) - Conflict with tornado >= 5; for now we can only cope with Tornado 4.x (boo#1101780). - Fix virt.full_info (bsc#1146382) - virt.volume_infos: silence libvirt error message - virt.volume_infos needs to ignore inactive pools - Fix for various bugs in virt network and pool states - Implement network.fqdns module function (bsc#1134860) - Added: * 2019.2.0-pr-54196-backport-173.patch * virt.volume_infos-silence-libvirt-error-message-175.patch * fix-virt.full_info-176.patch * implement-network.fqdns-module-function-bsc-1134860-.patch * virt.volume_infos-needs-to-ignore-inactive-pools-174.patch - Restore default behaviour of pkg list return (bsc#1148714) - Strip trailing "/" from repo.uri when comparing repos in apktpkg.mod_repo (bsc#1146192) - Added: * strip-trailing-from-repo.uri-when-comparing-repos-in.patch * restore-default-behaviour-of-pkg-list-return.patch - Use python3 to build package Salt for RHEL8 - Make python3 default for RHEL8 - Fix aptpkg systemd call (bsc#1143301) - Added: * fix-aptpkg-systemd-call-bsc-1143301.patch ==== samba ==== Version update (4.10.5+git.105.2bd98587873 -> 4.10.8+git.124.a2010fbd0de) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr0 libndr0-32bit libnetapi0 libnetapi0-32bit libsamba-credentials0 libsamba-credentials0-32bit libsamba-errors0 libsamba-errors0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-policy0-python3 libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap2 libsmbldap2-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-client samba-client-32bit samba-doc samba-libs samba-libs-32bit samba-libs-python3 samba-python3 samba-winbind samba-winbind-32bit - Update to samba 4.10.8 + CVE-2019-10197: user escape from share path definition; (bso#14035); (bsc#1141267); - Fix build on newer systems by modifying samba.spec to use consistent non-relative paths for pammodules in configure line and specification of pam_winbind.so library to package. - Update to samba 4.10.7 + Unable to create or rename file/directory inside shares configured with vfs_glusterfs_fuse module; (bso#14010). + build: Allow build when '--disable-gnutls' is set; (bso#13844) + samba-tool: Add 'import samba.drs_utils' to fsmo.py; (bso#13973). + Fix 'Error 32 determining PSOs in system' message on old DB with FL upgrade; (bso#14008). + s4/libnet: Fix joining a Windows pre-2008R2 DC; (bso#14021) + join: Use a specific attribute order for the DsAddEntry nTDSDSA object; (bso#14046). + vfs_catia: Pass stat info to synthetic_smb_fname(); (bso#14015). + lookup_name: Allow own domain lookup when flags == 0; (bso#14091). + s4 librpc rpc pyrpc: Ensure tevent_context deleted last; (bso#13932). + DEBUGC and DEBUGADDC doesn't print into a class specific log file; (bso#13915). + Request to keep deprecated option "server schannel", VMWare Quickprep requires "auto"; (bso#13949). + dbcheck: Fallback to the default tombstoneLifetime of 180 days; (bso#13967). + dnsProperty fails to decode values from older Windows versions; (bso#13969). + samba-tool: Use only one LDAP modify for dns partition fsmo role transfer; (bso#13973). + third_party: Update waf to version 2.0.17; (bso#13960). + netcmd: Allow 'drs replicate --local' to create partitions; (bso#14051). + ctdb-config: Depend on /etc/ctdb/nodes file; (bso#14017). - Prepare for use future use of kernel keyrings, modify /etc/pam.d/samba to include pam_keyinit.so; (bsc#1144059). - Update samba-winbind script to work with systemd; (bsc#1132739); - Drop samba dhcpcd hook scripts - Update to samba 4.10.6 + s3: winbind: Fix crash when invoking winbind idmap scripts; (bso#13956). + smbd does not correctly parse arguments passed to dfree and quota scripts; (bso#13964). + samba-tool dns: use bytes for inet_ntop; (bso#13965). + samba-tool domain provision: Fix --interactive module in python3; (bso#13828). + ldb_kv: Skip @ records early in a search full scan; (bso#13893). + docs: Improve documentation of "lanman auth" and "ntlm auth" connection; (bso#13981). + python/ntacls: Use correct "state directory" smb.conf option instead of "state dir"; (bso#14002). + registry: Add a missing include; (bso#13840). + Fix SMB guest authentication; (bso#13944). + AppleDouble conversion breaks Resourceforks; (bso#13958). + vfs_fruit makes direct use of syscalls like mmap() and pread(); (bso#13968). + s3:mdssvc: Fix flex compilation error; (bso#13987). + s3/vfs_glusterfs[_fuse]: Avoid using NAME_MAX directly; (bso#13872). + dsdb:samdb: schemainfo update with relax control; (bso#13799). + s3:util: Move static file_pload() function to lib/util; (bso#13964). + smbd: Fix a panic; (bso#13957). + ldap server: Generate correct referral schemes; (bso#12478). + s4 dsdb/repl_meta_data: fix use after free in dsdb_audit_add_ldb_value; (bso#13941). + s4 dsdb: Fix use after free in samldb_rename_search_base_callback; (bso#13942). + dsdb/repl: we need to replicate the whole schema before we can apply it; (bso#12204). + ldb: Release ldb 1.5.5; (bso#12478). + Schema replication fails if link crosses chunk boundary backwards; (bso#13713). + 'samba-tool domain schemaupgrade' uses relax control and skips the schemaInfo update provision; (bso#13799). + dsdb_audit: avoid printing "... remote host [Unknown] SID [(NULL SID)] ..."; (bso#13916). + python/ntacls: We only need security.SEC_STD_READ_CONTROL in order to get the ACL; (bso#13917). + s3:loadparm: Ensure to truncate FS Volume Label at multibyte boundary; (bso#13947). + Using Kerberos credentials to print using spoolss doesn't work; (bso#13939). + wafsamba: Use native waf timer; (bso#13998). + ctdb-scripts: Fix tcp_tw_recycle existence check; (bso#13984). ==== step ==== Version update (19.08.0 -> 19.08.1) Subpackages: step-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Fix minor typos * Fix crash when deleting a SoftBody (kde#408574) * Fix crash on exit * Add MIME type for Step files (kde#296317) ==== sweeper ==== Version update (19.08.0 -> 19.08.1) Subpackages: sweeper-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== texinfo ==== Version update (6.5 -> 6.6) Subpackages: info makeinfo - Move texindex.awk to package texinfo as texindex(1) is part of and use this awk script - Port the texinfo-zlib.patch to new version 6.6 to solve build problems - Update to version 6.6: * Language: . new commands @&, @ampchar{} . @cropmarks command removed . @ctrl is no longer recognised (it was a way to insert literal control characters in Info files, but deprecated since the time of Texinfo version 2) . \usebracesinindexestrue is no longer recommended for using braces in index entries, and has been a no-op for some time * texi2any . extension modules fixed to work with the "thread-safe locales" of Perl 5.28 and newer . some code changed to stop warnings being given by newer versions of Perl . for HTML output, use `id' to define link targets instead of the `name' attribute on <a> . A native-code implementation of the Texinfo parser has been included on an experimental basis, which makes texi2any a lot faster. Set the `TEXINFO_XS_PARSER' environment variable to 1 to use. . changes to HTML output: . omit colon after node name in menus by default (use `MENU_ENTRY_COLON' to add it back) . no special CSS for commands like @smallexample . new customization variable `SECTION_NAME_IN_TITLE' to use the section name as the document <title> . use section names instead of node names in generated menus . pass on flags set with -D to TeX . useless static libraries are not installed . the newline after an @insertcopying is not output . warning given for @multitable prototypes not in braces . @indent and @noindent are not allowed inside the arguments to commands where they are not meaningful . @quote-arg and @allow-recursion are not recognised (these two used to be recognised by makeinfo in macro definitions but were never implemented in texinfo.tex) . `FIX_TEXINFO' removed as a customization variable . do not recognise or warn about obsolete customization variables * info . debugging output with -x is not diverted to a separate infodebug file * Development: . switch from Subversion to git - https://savannah.gnu.org/git/?group=texinfo . automake 1.16 - Drop no longer needed patch: * perl-5.28-fixes.patch ==== umbrello ==== Version update (19.08.0 -> 19.08.1) Subpackages: umbrello-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - Changes since 19.08.0: * Fix build with cmake < 3.7 * Fixed grammer and punctuation * Fixup * Fix 'Umbrello could not open imported source files' (kde#410904) ==== upower ==== Version update (0.99.10 -> 0.99.11) Subpackages: libupower-glib3 typelib-1_0-UpowerGlib-1_0 upower-lang - Update to version 0.99.11: + New Features: - Add code of conduct document. - build: Migrate from intltool to gettext. - rules: Split off HID++ udev rules. - Harden systemd service. - Let systemd create /var/lib/upower. - Move D-Bus policy file to /usr/share/dbus-1/system.d/. + Bug fixes: - Fix endless loop burning 100% CPU on keyboard plugout with external backlight. - linux: . Start polling for unknown device batteries too. . Retry to get a battery type if it's unknown. . Don't treat device batteries like laptop batteries. - Replace use of G_TYPE_INSTANCE_GET_PRIVATE and g_type_class_add_private(). ==== util-linux ==== Subpackages: libblkid-devel libblkid1 libblkid1-32bit libfdisk1 libmount1 libmount1-32bit libsmartcols1 libuuid-devel libuuid1 libuuid1-32bit util-linux-lang - lsblk: force to print PKNAME for partition with e3bb9bfb76c17b1d05814436ced62c05c4011f48.patch - Remove outdated buildignore for pwdutils, had no effect with shadow anyways ==== util-linux-systemd ==== - lsblk: force to print PKNAME for partition with e3bb9bfb76c17b1d05814436ced62c05c4011f48.patch - Remove outdated buildignore for pwdutils, had no effect with shadow anyways ==== virtualbox ==== Version update (6.0.10 -> 6.0.12) Subpackages: virtualbox-guest-tools virtualbox-guest-x11 virtualbox-kmp-default Added file "README.build" to documentation with instructions for me and any eventual successors. - Version update to 6.0.12 (released September 03 2019 by Oracle) This is a maintenance release. The following items were fixed and/or added: OCI export: handle empty disk image correctly API: fix potential crash when using the medium I/O functionality VBoxManage: fixed documentation of VBoxManage modifyvm uarttype documentation (bug #18759) Network: scrub inbound TCP URG pointer, working around incorrect OOB handling USB: Improved identification of power-saved devices on Windows hosts Audio: in the AC97 work around buggy guest drivers which reprogram the sampling rate, breaking audio in and/or audio out Linux host and guest: fix kernel module build for SLES 12 SP4 kernel 3D: fixed state saving and loading when the VBoxVGA graphics adapter is used with 3D enabled (bug #18802, 6.0.10 regression) Windows guests: fixed mouse cursor visibility updating Windows guests: fixed graphics corruption in Windows 10 search menu with VBoxSVGA adapter Windows guests: fixed dwm.exe crashes related to the WDDM driver for VBoxSVGA adapter when the VM has lots of RAM MacOS Guest Additions fail to start in 6.0.10 (bug #18793) Windows guests: fixed crashes when using shared folders (bug #18766) Linux guests: unprivileged users unable to create files inside shared folders (bug #18737) Linux guests: improve compatibility of vboxvideo.ko kernel module build logic (bug #18869) ==== webkit2gtk3 ==== Version update (2.24.4 -> 2.26.0) Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Update to version 2.26.0: + Add support for subprocess sandboxing. + Add support for HSTS (HTTP Strict Transport Security). + Use libwpe with fdo backend to implement accelerated compositing under wayland. + Remove support for GTK2 NPAPI plugins. + Add support for datalist element in text input fields. + Show the emoji chooser popover for editable content. + Improve rendering of form controls when GTK theme is dark. + Fix rendering artifacts in youtube volume button and github comment box. + Single process model has been deprecated for security reasons. - Update to version 2.25.92: + Add WEBKIT_USE_SINGLE_WEB_PROCESS environment variable to force single process model in all WebKitWebContext. This is a temporary solution for applications still depending on the single process mode behavior. It will be only available in 2.26 series. + Add new API to remove a filter from an user content manager given its identifier. + Add support for HSTS. + Several improvements and bug fixes in MSE media player. + Fix building without unified sources. + Fix several crashes and rendering issues. + Updated translations. - Disable pkgconfig(wpe-1.0) and pkgconfig(wpebackend-fdo-1.0) BuildRequires and pass DUSE_WPE_RENDERER=OFF to cmake. Needs more work upstream. - Update to version 2.25.4: + Switch to use libsoup WebSockets API. + Add support for permessage-deflate WebSocket extension. + Add support for datalist element in text input fields. + Fix a crash with empty video source. + Fix several crashes and rendering issues. - Update to version 2.25.3: + Remove support for GTK2 NPAPI plugins. + Fix web view updates after swapping web process if accelerated compositing mode is forced. + Make kinetic scrolling work again. + Fix position of emoji chooser when page is scrolled. + Fix web process deadlock when scrolling twitter timeline which contains HLS videos. + Make navigation gesture use dark fallback background color color on dark themes. + Make Previous/Next gesture work in RTL mode. + Support cancelling touchscreen back/forward gesture. + Add user agent quirk to make github work in FreeBSD. + Fix content disappearing when using CSS transforms. + Fix some radio streams that could not be played. + Fix video pause that sometimes caused to skip to finish. + Fix volume level changes when playing a video. + Fix several crashes and rendering issues. - Changes from version 2.25.2: + Enable process switch on cross site navigation. + Use libwpe with fdo backend to implement accelerated compositing under wayland. + Fix rendering artifacts in youtube volume button. + Fix trapezoid artifact in github comment box. + Ensure web extensions directory is readable when sandbox is enabled. + Fix the executable name of WebDriver process, renamed by mistake in 2.25.1. + Enable hyperlink auditing setting by default. + Remove the option to build without using the redirected XComposite window. + Fix HLS streams being slow to start. + Make accessibility work when sandbox is enabled. + Fix several crashes and rendering issues. - Changes from version 2.25.1: + Add support for subprocess sandboxing. + Add API to get the web process unique identifier of a WebKitFrame. + Add WebKitWebPage::did-associate-form-controls-for-frame signal and deprecate did-associate-form-controls. + Implement AtkComponentIface scroll_to methods. + Improve rendering of form controls when GTK theme is dark and enable prefers-color-scheme media query. + Show the emoji chooser popover for editable content. + Fix touch capabilities detection for websites checking touch events properties present in window or pointer media queries. + Fix several crashes and rendering issues. - Drop webkit2gtk3-bwo197558-hang.patch: Fixed upstream. - Add pkgconfig(wpe-1.0) and pkgconfig(wpebackend-fdo-1.0) BuildRequires: New dependencies. - Enable bubblewrap, xdg-dbus-proxy and pkgconfig(libseccomp) BuildRequires as well as bubblewrap and xdg-dbus-proxy Requires: Sandbox feature is enabled again. - Drop conditional pkgconfig(gtk+-2.0) BuildRequires and webkit2gtk3-plugin-process-gtk2 sub-package, support for gtk2 plugins are now dropped upstream. Add Obsoletes in libwebkit2gtk. ==== xen ==== Subpackages: xen-libs xen-tools xen-tools-domU - Upstream bug fixes (bsc#1027519) 5d419d49-x86-spec-ctrl-report-proper-status.patch 5d43253c-x86-ucode-always-collect_cpu_info-at-boot.patch 5d4aa36f-x86-apic-enable-x2APIC-mode-earlier.patch 5d4afa7a-credit2-fix-memory-leak.patch 5d4d850a-introduce-bss-percpu-page-aligned.patch 5d516531-x86-xpti-dont-leak-TSS-adjacent-data.patch 5d5bf475-x86-PV-fix-handling-of-iommu-mappings.patch 5d6524ca-x86-mm-correctly-init-M2P-entries.patch - Preserve modified files which used to be marked as %config, rename file.rpmsave to file ==== xtables-addons ==== Version update (3.3_k5.2.11_1 -> 3.5_k5.2.14_1) - Update to release 3.5 * Make xt_DELUDE and xt_TARPIT work under Linux >= 5.0 when used in conjunction with bridges. - Update to release 3.4 * Support for Linux 5.3 - Drop remove_flags.patch ==== yakuake ==== Version update (19.08.0 -> 19.08.1) Subpackages: yakuake-lang - Update to 19.08.1 * New bugfix release * For more details please see: * https://www.kde.org/announcements/announce-applications-19.08.1.php - No code change since 19.08.0 ==== yast2-installation ==== Version update (4.2.11 -> 4.2.12) - Set X-SuSE-YaST-AutoInstResource in desktop file (bsc#144894). - 4.2.12 ==== yast2-schema ==== Version update (4.2.1 -> 4.2.2) - Report warning if X_SuSE_YaST_AutoInstResource has not been set in desktop file (bsc#144894). - 4.2.2

9 20

[opensuse-factory] Leap 15.2 Build 498.2 released!
by Ludwig Nussel 27 Sep '19

27 Sep '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.2&bui… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Distribution&q… When you reply to discuss some issues, make sure to change the subject. Please use the test plan at https://docs.google.com/spreadsheets/d/1AGKijKpKiJCB616-bHVoNQuhWHpQLHPWCb3… to record your testing efforts and use bugzilla to report bugs. Packages changed: Mesa Mesa-drivers MozillaFirefox (60.6.2 -> 60.8.0) MozillaFirefox-branding-openSUSE aaa_base bash ceph (14.2.2.349+g6716a1e448 -> 14.2.2.354+g8878cf2360) chromium (76.0.3809.132 -> 77.0.3865.75) cups-filters (1.20.3 -> 1.25.0) curl (7.60.0 -> 7.66.0) desktop-file-utils device-mapper expat ghostscript ibus kernel-source (5.3.rc7 -> 5.3.0) kpat krb5 libdrm libreoffice (6.2.5.2 -> 6.2.7.1) libstorage-ng (4.2.3 -> 4.2.11) libvirt (5.1.0 -> 5.7.0) lmdb lvm2 makedumpfile (1.6.3 -> 1.6.6) openldap2 python-Werkzeug python-cairo python-libvirt-python (5.1.0 -> 5.7.0) python-urllib3 samba (4.9.5+git.176.375e1f05788 -> 4.9.5+git.187.71edee57d5a) yast2 (4.2.20 -> 4.2.21) yast2-control-center (4.1.7 -> 4.2.2) yast2-installation (4.2.12 -> 4.2.13) yast2-network (4.2.11 -> 4.2.12) yast2-packager (4.2.24 -> 4.2.25) yast2-schema (4.2.2 -> 4.2.3) yast2-security (4.2.1 -> 4.2.2) yast2-services-manager (4.2.4 -> 4.2.5) yast2-storage-ng (4.2.36 -> 4.2.38) yast2-ycp-ui-bindings (4.1.0 -> 4.2.1) === Details === ==== Mesa ==== Subpackages: Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - U_intel-Add-support-for-Comet-Lake.patch * adds support for Cometlake (jira #SLE-4983, bsc#1137515) ==== Mesa-drivers ==== Subpackages: Mesa-dri Mesa-dri-nouveau Mesa-gallium Mesa-libva libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libvulkan_radeon libxatracker2 - U_intel-Add-support-for-Comet-Lake.patch * adds support for Cometlake (jira #SLE-4983, bsc#1137515) ==== MozillaFirefox ==== Version update (60.6.2 -> 60.8.0) Subpackages: MozillaFirefox-translations-common MozillaFirefox-translations-other - Mozilla Firefox Firefox ESR 60.8 MFSA 2019-22 (bsc#1140868) * CVE-2019-9811 (bmo#1538007, bmo#1539598, bmo#1563327) Sandbox escape via installation of malicious language pack * CVE-2019-11711 (bmo#1552541) Script injection within domain through inner window reuse * CVE-2019-11712 (bmo#1543804) Cross-origin POST requests can be made with NPAPI plugins by following 308 redirects * CVE-2019-11713 (bmo#1528481) Use-after-free with HTTP/2 cached stream * CVE-2019-11729 (bmo#1515342) Empty or malformed p256-ECDH public keys may trigger a segmentation fault * CVE-2019-11715 (bmo#1555523) HTML parsing error can contribute to content XSS * CVE-2019-11717 (bmo#1548306) Caret character improperly escaped in origins * CVE-2019-11719 (bmo#1540541) Out-of-bounds read when importing curve25519 private key * CVE-2019-11730 (bmo#1558299) Same-origin policy treats all files in a directory as having the same-origin * CVE-2019-11709 (bmo#1515052, bmo#1533522, bmo#1539219, bmo#1540759, bmo#1547266, bmo#1547757, bmo#1548822, bmo#1550498, bmo#1550498) Memory safety bugs fixed in Firefox 68 and Firefox ESR 60.8 - Mozilla Firefox Firefox 60.7.2 MFSA 2019-19 (bsc#1138872) * CVE-2019-11708 (bmo#1559858) sandbox escape using Prompt:Open - Mozilla Firefox Firefox 60.7.1 MFSA 2019-18 (bsc#1138614) * CVE-2019-11707 (bmo#1544386) Type confusion in Array.pop - Added the new Mozilla's GPG key with subkey fingerprint 097B 3130 77AE 62A0 2F84 DA4D F1A6 668F BB7D 572E, expiring on 2021-05-29 to the mozilla.keyring file - Fix broken language plugins (bsc#1137792) - update to Firefox ESR 60.7 (bsc#1135824) * Font and date adjustments to accommodate the new Reiwa era in Japan * MFSA 2019-14/CVE-2019-9817 (bmo#1540221) Stealing of cross-domain images using canvas * MFSA 2019-14/CVE-2019-9800 (bmo#1499108, bmo#1499719, bmo#1516325, bmo#1532465, bmo#1533554, bmo#1534593, bmo#1535194, bmo#1535612, bmo#1538042, bmo#1538619, bmo#1538736, bmo#1540136, bmo#1540166, bmo#1541580, bmo#1542097, bmo#1542324, bmo#1546327) Memory safety bugs fixed in Firefox 67 and Firefox ESR 60.7 * MFSA 2019-14/CVE-2019-9816 (bmo#1536768) Type confusion with object groups and UnboxedObjects * MFSA 2019-14/CVE-2019-9815 (bmo#1546544, bmo#https://mdsattacks.com/) Disable hyperthreading on content JavaScript threads on macOS * MFSA 2019-14/CVE-2019-11698 (bmo#1543191) Theft of user history data through drag and drop of hyperlinks to and from bookmarks * MFSA 2019-14/CVE-2019-11692 (bmo#1544670) Use-after-free removing listeners in the event listener manager * MFSA 2019-14/CVE-2019-11693 (bmo#1532525) Buffer overflow in WebGL bufferdata on Linux * MFSA 2019-14/CVE-2019-7317 (bmo#1542829) Use-after-free in png_image_free of libpng library * MFSA 2019-14/CVE-2019-9820 (bmo#1536405) Use-after-free of ChromeEventHandler by DocShell * MFSA 2019-14/CVE-2019-9818 (bmo#1542581) Use-after-free in crash generation server * MFSA 2019-14/CVE-2019-11691 (bmo#1542465) Use-after-free in XMLHttpRequest * MFSA 2019-14/CVE-2019-9819 (bmo#1532553) Compartment mismatch with fetch API * MFSA 2019-14/CVE-2019-11694 (bmo#1534196) Uninitialized memory memory leakage in Windows sandbox - Sync with Devel:Desktop:Mozilla:*:next - Enable Firefox to build with Rust >= 1.30 with fix. See below. - update to 60.6.3 (bmo#1549249) * Further improvements to re-enable web extensions which had been disabled for users with a master password set. ==== MozillaFirefox-branding-openSUSE ==== - layout.word_select.stop_at_punctuation -> true (boo#1133163) ==== aaa_base ==== Subpackages: aaa_base-extras aaa_base-malloccheck - Add patch git-07-82a17f1689e8957635c8ccaae7c9b3bff7f94d49.patch * add sysctl.d/51-network.conf to tighten network security a bit see also (boo#1146866) (jira#SLE-9132) ==== bash ==== Subpackages: bash-doc bash-lang libreadline7 readline-doc - Rework patch readline-7.0-screen.patch again for bug boo#1143055 * Map all "screen(-xxx)?.yyy(-zzz)?" to "screen" as well as map "konsole(-xxx)?" and "gnome(-xxx)?" to "xterm" - Add patch bash-4.4-bgpoverflow.patch which is a backport from bash 5.0 to perform better with large numbers of sub processes (bsc#1133773) ==== ceph ==== Version update (14.2.2.349+g6716a1e448 -> 14.2.2.354+g8878cf2360) Subpackages: librados2 librbd1 - Update to 14.2.2-354-g8878cf2360: + rgw: Move upload_info declaration out of conditional (bsc#1137189, https://github.com/SUSE/ceph/pull/325) ==== chromium ==== Version update (76.0.3809.132 -> 77.0.3865.75) - Add patch from Fedora for cert transparency: * chromium-77.0.3865.75-certificate-transparency.patch - Add patches from gentoo: * chromium-77-clang.patch * chromium-77-gcc-no-opt-safe-math.patch * chromium-77-no-cups.patch * chromium-77-std-string.patch - Update patch old-libva.patch to build on openSUSE Leap 15.0 - Update to chromium 77.0.3865.75 bsc#1150425: * CVE-2019-5870: Use-after-free in media * CVE-2019-5871: Heap overflow in Skia * CVE-2019-5872: Use-after-free in Mojo * CVE-2019-5874: External URIs may trigger other browsers * CVE-2019-5875: URL bar spoof via download redirect * CVE-2019-5876: Use-after-free in media * CVE-2019-5877: Out-of-bounds access in V8 * CVE-2019-5878: Use-after-free in V8 * CVE-2019-5879: Extension can bypass same origin policy * CVE-2019-5880: SameSite cookie bypass * CVE-2019-5881: Arbitrary read in SwiftShader * CVE-2019-13659: URL spoof * CVE-2019-13660: Full screen notification overlap * CVE-2019-13661: Full screen notification spoof * CVE-2019-13662: CSP bypass * CVE-2019-13663: IDN spoof * CVE-2019-13664: CSRF bypass * CVE-2019-13665: Multiple file download protection bypass * CVE-2019-13666: Side channel using storage size estimate * CVE-2019-13667: URI bar spoof when using external app URIs * CVE-2019-13668: Global window leak via console * CVE-2019-13669: HTTP authentication spoof * CVE-2019-13670: V8 memory corruption in regex * CVE-2019-13671: Dialog box fails to show origin * CVE-2019-13673: Cross-origin information leak using devtools * CVE-2019-13674: IDN spoofing * CVE-2019-13675: Extensions can be disabled by trailing slash * CVE-2019-13676: Google URI shown for certificate warning * CVE-2019-13677: Chrome web store origin needs to be isolated * CVE-2019-13678: Download dialog spoofing * CVE-2019-13679: User gesture needed for printing * CVE-2019-13680: IP address spoofing to servers * CVE-2019-13681: Bypass on download restrictions * CVE-2019-13682: Site isolation bypass * CVE-2019-13683: Exceptions leaked by devtools - Added patches: * chromium-77-blink-include.patch * chromium-77-fix-gn-gen.patch * chromium-77-gcc-abstract.patch * chromium-77-gcc-include.patch * chromium-77-system-hb.patch * chromium-unbundle-zlib.patch - Removed merged patches: * chromium-76-gcc-ambiguous-nodestructor.patch * chromium-76-gcc-blink-constexpr.patch * chromium-76-gcc-blink-namespace1.patch * chromium-76-gcc-blink-namespace2.patch * chromium-76-gcc-gl-init.patch * chromium-76-gcc-include.patch * chromium-76-gcc-noexcept.patch * chromium-76-gcc-private.patch * chromium-76-gcc-pure-virtual.patch * chromium-76-gcc-uint32.patch * chromium-76-gcc-vulkan.patch * chromium-76-quiche.patch * chromium-angle-inline.patch * chromium-fix-char_traits.patch * chromium-skia-aarch64-buildfix.patch * chromium-vaapi-fix.patch * gcc-lto-rsp-clobber.patch - Refreshed patches: * chromium-prop-codecs.patch * chromium-system-icu.patch * chromium-vaapi.patch * old-libva.patch ==== cups-filters ==== Version update (1.20.3 -> 1.25.0) - Add add-cstring-include.patch to include cstring for memcpy and strcmp - BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to shortcut the build queues by allowing usage of systemd-mini - Update to version 1.25.0: * pdftoijs, pdftoopvp: Removed these deprecated filters completely as there is no demand for them any more. They also used unstable, undocumented APIs of Poppler. * pdftoraster: Changed from using unstable, undocumented APIs of Poppler to stable, documented ones, to improve maintainability of this filter, and with it of the cups-filters package. * libcupsfilters: Added support for color spaces CMY and RGBW when using filters without PPD file (mainly for development and debugging, option "print-color-mode" with values "cmy-XX" and "rgbw-XX" with XX being the number of bits per color). - Changes from version 1.24.0: * cups-browsed: Integration of Deepak Patankar's Google Summer of Code 2018 project with the main goal of clustering different printers and automatically selecting the destination printers by job content and option/attribute settings. * cups-browsed, implicitclass: Support for mixed clusters of remote CUPS queues and IPP network printers. For this PPD files of remote CUPS queues are generated by cups-browsed based on IPP queries, as for native IPP printers, the number of jobs for load balancing is polled in a way that it works also with native IPP printers, the implicitclass backend sends jobs directly to the printer instead of re-queueing them via CUPS. * cups-browsed: Merge IPP attributes of several printers to combined attributes for the cluster to generate the cluster's PPD file, including PPD constraints for option combinations not fulfillable by any of the member printers, and finding reasonable, non-conflicting default settings. * cups-browsed: Selection algorithm for the destination printer for a job sent to the cluster. Based on the job settings requested such as page size, media type, print quality, the best most suitable printer in the cluster for the job will be selected. * cups-browsed, implicitclass: Filter jobs to clusters already locally. Due to the fact that a cluster's member printers are not exclusively non-raw CUPS queues with the complete filtering framework on the remote server, but also native IPP printers, we need to support generic driverless printers as destination. So we cannot pass on the input data unfiltered but need to filter locally. We let the cluster's PPD file emulate a PDF printer, letting the local CUPS queue of the cluster run pdftopdf and any pre-filters to turn the input into PDF and we let the implicitclass backend turn PDF into a format understood by the destination printer, supporting the 4 formats of driverless IPP printing: PDF, PWG Raster, Apple Raster, PCLm. - Drop libpoppler-cpp0, libpoppler-devel and libpoppler-glib-devel BuildRequires. - Add pkgconfig(poppler-cpp) BuildRequires following upstream changes. - Update to version 1.23.0: * This release adds support for the "print-scaling" IPP attribute and has the code for the support of MuPDF as PDF renderer vastly simplified. * pdftops, mupdftoraster: Let pdftops call mutool directly and so that it directly outputs PostScript, eliminating the need to call the mupdftoraster and rastertops filters. * mupdftoraster: Reduced the use of temporary files from 3 to just one. * imagetopdf, imagetoraster, pdftopdf: Add support for print-scaling option. - Changes from version 1.22.6: * Bug fix release, to address a further issue of cups-browsed removing user-created print queues, to make grayscale/monochrome PostScript jobs of colored input file actually output grayscale/monochrome files, to fix several bugs when using MuPDF as PDF renderer, and to silence compiler warnings. - Version upgrade to 1.22.5 * foomatic-rip: Changed Ghostscript call to count pages in a PDF file to use "runpdfbegin" and not the undocumented Ghostscript internal "pdfdict", so that it works with Ghostscript 9.27 and later (Debian bug #926576, Arch Linux bug #62251, openSUSE boo#1131771, cups(a)cups.org mailing list thread https://lists.cups.org/pipermail/cups/2019-April/074563.html). - Version upgrade to 1.22.4 * cups-browsed: Fix broken trailing space removal on "NickName" (Pull request #103). * pdftops: Emit PostScript Level 2 instead of Level 3 for Brother PostScript printers as at least some of them report to support level 3 but ontly work with Level 2 (Ubuntu bug #1306849, comment #42). * bannertopdf: When multiplying the page for N-up or Duplex printing one page too much was generated (Issue #102). - Version upgrade to 1.22.3 * libcupsfilters: Added error checks for processing GIF, to avoid crashes or hangs on broken GIF files (Issues #81, #82, Pull request #100). * cups-browsed: Added hint to the man page and configuration file that with "DebugLogging stderr" the logging output goes to journal or syslog if cups-browsed is running as system service (Issue #28). - Version upgrade to 1.22.2 * cups-browsed: Let distribution of jobs sent to queues with "implicitclass" backend (usually clusters) be done by a "job-state" CUPS notification and not by "printer-state-changed" any more. The "job-state" notification already contains the job ID. Before we had to poll the job ID from CUPS via IPP which was sometimes unreliable (Issue #97). * imagetopdf, imagetoraster, pdftopdf, libcupsfilters: Added new page scaling options: "fill" scales the input page (typically a photo) so that the output page (typically with different aspect ratio) gets completely filled, aloowing for some content of the input page getting lost. "crop-to-fit" allows for easy printing of documents on slightly different output page sizes (A4 <-> Letter) maintaining the size and centering and cropping into the destination page. Thanks to Dheeraj Yadav (dhirajyadav135 at gmail dot com) for the patch (Pull request #92). * cups-browsed: Do not do IPP request for printer-is-shared option for remote cups queues with CUPS 2.2.x and newer (Pull request #91). * cups-browsed: Fix crash bug when reading "Cluster" directive from configuration file (Issue #94). * driverless: Updated man page as now also Mopria and Wi-Fi Direct printers are supported. Mentioned also ippusbxd. - Update to version 1.22.1: * braille: Use sort command with LC_ALL=C for reproducibility of the genrated files, needed for distribution packaging. * cups-browsed, driverless: When polling the printer's capabilities via get-printer-attributes IPP request for driverless printing, use the attributes "all" and "media-col-database". Without "all" some printers do not report "urf-supported" and without "media-col-database" not all paper size and marging info gets reported. * braille: Document how to rework output before embossing. - Update to version 1.22.0: * From this release on the pdftopdf filter flattens interactive PDF forms and annotations internally, using QPDF, instead of calling external utilities. This especially eliminates slowing factors as additional piping of the data and unneeded use of PDF interpreters. Using external utilities for flattening is still possible in case of problems. In addition, a crash bug in cups-browsed got fixed and compatibility of the filters with Poppler 0.72 assured. - Drop upstream fixed patches: * 0001-Raise-minimum-poppler-version-from-0.18-to-0.19.patch * 0002-Adapt-code-for-SplashXPathScanner-state-handling-sin.patch * 0003-Support-some-more-methods-returning-const.patch * 0004-Support-GooString-c_str-introduced-by-poppler-0.72.patch - Fix building with Poppler 0.72 Add 0001-Raise-minimum-poppler-version-from-0.18-to-0.19.patch Add 0002-Adapt-code-for-SplashXPathScanner-state-handling-sin.patch Add 0003-Support-some-more-methods-returning-const.patch Add 0004-Support-GooString-c_str-introduced-by-poppler-0.72.patch See https://github.com/OpenPrinting/cups-filters/pull/83 - Update to version 1.21.6: * Bug fix release, mainly for cups-browsed to avoid crashes and infinite printer removal/re-creation loops and spurious local queues for local CUPS printers. Also expanded PostScript interpreter bug workaround to more Apple LaserWriter models. * cups-browsed: To find out whether a DNS-SD-discovered printer is from the local machine, use not only the flags in the Avahi lookup result but also check the host name. * cups-browsed: When a local CUPS queue pointing to a remote CUPS printer was removed and re-created to make it a permanent queue, on_printer_deleted() was triggered by cupsd's notification to re-create a lost queue. Now on_printer_deleted() checks whether the queue is really gone and only re-creates then. * cups-browsed: When updating the CUPS queues, also removed and unregistered queues and not only created queues got checked for HTTP timeouts, which caused crashes on shutdown. * pdftops: Use the PS interpreter of Poppler for all Apple LaserWriter 16/600, 4/600, 12/640, 12/600, 12/660 as they all seem to not work with Ghostscript's PS output. * cups-browsed: On shutdown queues got removed even if they still had jobs. - Changes from version 1.21.5: * Bug fix release, to build with Poppler 0.71 and with cups-browsed converting temporary CUPS queues reliably to permanent queues. * cups-browsed: We cannot reliably determine whether a CUPS queue is temporary, so we apply the procedure to make a temporary queue permanent to any unshared queue. * pdftoraster, pdftopdf, pdftoijs, pdftoopvp: Do not use the Poppler-specific "GBool", "gFalse", "gTrue" any more, as Poppler has switched to standard "bool", "false", "true" in version 0.71.0. - Update to version 1.21.4: * cups-browsed: cups-browsed: Limit the number of retries for creating a print queue when it comes to HTTP timeouts. Number of retries given by HttpMaxRetries directive in cups-browsed.conf. * cups-browsed: Read out current time right before setting the timeouts. * libcupsfilters: In the PPD generator for driverless IPP printing let "*cupsManualCopies: true" lines get added to the PPD if printing is done in a raster format as then pdftopdf needs to generate the copies. * pdftoraster, pdftoopvp, pdftoijs: Fix build with Poppler >= 0.70 * pdftopdf: Fixed printing multiple copies on driverless IPP printers. When printing collated copies the multiple copies got applied twice, resulting in n*n instead of n copies. * pdftoraster, pdftoopvp, pdftoijs: Poppler removed memCheck and gMemReport functions, remove appropriate calls. - Changes from version 1.21.3: * foomatic-rip: Reset stdin after replacing the underlying file descriptor. - Changes from version 1.21.2: * cups-browsed: Fixed freeing of literal string caused by Coverity Scan issue fix. - Do not diferentiate for service location, it is in sbindir on all systems we support now - Use license for license install - Version update to 1.21.1: - foomatic-rip: Fixed segmentation fault caused by wrong Coverity Scan issue fix (Issue #57, Debian bug #907026). - Build system: Require QPDF 8.1.0 or later as it is needed by bannertopdf (Issue #56). - libcupsfilters, cups-browsed, driverless, foomatic-rip, parallel: Silenced warnings from newest gcc. - libcupsfilters: When generating a PPD for driverless printing on a remote IPP printer, make pdftopdf not being run by the local queue if the remote queue is a CUPS queue to avoid running pdftopdf twice (CUPS Issue #5361). - libcupsfilters, cups-browsed, driverless, bannertopdf, foomatic-rip, pdftops, pdftoraster, rastertops, rastertoescpx, sys5ippprinter, beh: Fixed Coverity Scan issues. Thanks to Zdenek Dohnal (zdohnal at redhat dot com) for the tests and the patches. - bannertopdf: Switched over from using Poppler to using QPDF for generating the PDF pages. With Poppler unstable APIs were used which were subject to change. Thanks to Sahil Arora for this project in the Google Summer of Code 2018 (Pull request #25). - cups-browsed: Manually defined clusters ("Cluster" directive in cups-browsed.conf) caused cups-browsed to crash. - Version upgrade to 1.20.4 - gstoraster: Removed unneeded "if"s (Ghostscript bug #692705). - cups-browsed: When checking whether there is already a local print queue with the same URI as the one of the discovered printer, consider also as equal URI if the URIs only differ by use of IPP or IPPS and/or use of HTTPS port 443 instead of IPP port 631. - cups-browsed: Also upgrade from ipp: to ipps: when the ipps: URI is on HTTPS port 443 instead of IPP port 631. This is common on IPP network printers. - pdftopdf: Removed support for hardware-implemented reversing of page order in PostScript printers. It was once not correctly implemented in cups-filters and second, such printers are extremely rare, and on Gutenprint PPDs with pseudo OutputOrder option hardware reversing was even wrongly assumed (Issue #47). - pdftopdf: Accept option "output-order=normal/reverse" for reversing page order (Issue #47) and also "page-delivery= same-order/reverse-order" (CUPS Issue #5340). - libcupsfilters: Let the PPD generator add "*PageStackOrder ..." lines to the choices of the "OutputBin" option, to mark which output bins need the pages printed in reverse order (Issue #47). - libcupsfilters: Let the PPD generator correctly create a "*DefaultOutputOrder: ..." entry, depending on whether the paper is put out face-up or face-down in the default output bin (Issue #47). - libcupsfilters: Fixed human-readable name of the OutputBin option in the PPD generator. - pdftoopvp: Silence compiler warning (Issue #42). - cups-browsed: If the user modifies/overwrites a print queue created by cups-browsed, it will now not only be automatically released from the control of cups-browsed, but we also create a replacement for our generated local queue under a new name. - cups-browsed: Make URIS for using the implicitclass backend correctly working also with queue names containing an '@' character. - braille: Strengthen error checking (Pull request #41). - braille: Index: Replace bogus characters with space (Pull request #41). - braille: Add print and braille page number options (Pull request #41). - braille: Index: Use standard duplex cups option (Pull request #41). - cups-browsed: Moved auto-generation of PPD file for IPP network printers from create_remote_printer_entry() function to update_cups_queues(). This allows re-creating accidentally removed or overwritten local queues without losing the PPD file. - braille: Add option to pick hyphenation rule according to current locale and make it the default for second translation table. (Pull request #38 and #39). - braille: Remove generated defs on "make clean". (Pull request #38). - braille: Turn non-breakable spaces to spaces. (Pull request [#38] and #39). - braille: Fix character encoding when extracting text. When extracing text from a zip file or a pdf, the resulting text is always utf-8 independently of the original locale, so we need to force that. (Pull request #38). - braille: Warn when no text translation was selected in case the user didn't notice. (Pull request #37). - braille: Fix spurious spacing after last Form-Feed (Pull request #45). - Drop pdftoopvp_Silence-compiler-warning.patch - Add pdftoopvp_Silence-compiler-warning.patch: pdftoopvp: Silence compiler warning. ==== curl ==== Version update (7.60.0 -> 7.66.0) Subpackages: libcurl4 libcurl4-32bit - Update to 7.66.0 [bsc#1149496, CVE-2019-5482][bsc#1149495, CVE-2019-5481] [bsc#1149604, bsc#1149572, jsc#SLE-9295] * Changes: - CURLINFO_RETRY_AFTER: parse the Retry-After header value - HTTP3: initial (experimental still not working) support - curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool - curl: support parallel transfers with -Z - curl_multi_poll: a sister to curl_multi_wait() that waits more - sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID * Bugfixes: - CVE-2019-5481: FTP-KRB double-free - CVE-2019-5482: TFTP small blocksize heap buffer overflow - CMake: remove needless newlines at end of gss variables - CMake: use platform dependent name for dlopen() library - CURLINFO docs: mention that in redirects times are added - CURLOPT_ALTSVC.3: use a "" file name to not load from a file - CURLOPT_ALTSVC_CTRL.3: remove CURLALTSVC_ALTUSED - CURLOPT_HEADERFUNCTION.3: clarify - CURLOPT_HTTP_VERSION: seting this to 3 forces HTTP/3 use directly - CURLOPT_READFUNCTION.3: provide inline example - CURLOPT_SSL_VERIFYHOST: treat the value 1 as 2 - Curl_addr2string: take an addrlen argument too - Curl_fillreadbuffer: avoid double-free trailer buf on error - HTTP: use chunked Transfer-Encoding for HTTP_POST if size unknown - alt-svc: add protocol version selection masking - alt-svc: fix removal of expired cache entry - alt-svc: make it use h3-22 with ngtcp2 as well - alt-svc: more liberal ALPN name parsing - alt-svc: send Alt-Used: in redirected requests - alt-svc: with quiche, use the quiche h3 alpn string - asyn-thread: create a socketpair to wait on - cleanup: move functions out of url.c and make them static - cleanup: remove the 'numsocks' argument used in many places - configure: avoid undefined check_for_ca_bundle - curl.h: add CURL_HTTP_VERSION_3 to the version enum - curl: cap the maximum allowed values for retry time arguments - curl: handle a libcurl build without netrc support - curl: make use of CURLINFO_RETRY_AFTER when retrying - curl: use CURLINFO_PROTOCOL to check for HTTP(s) - curl_global_init_mem.3: mention it was added in 7.12.0 - curl_version: bump string buffer size to 250 - curl_version_info.3: mentioned ALTSVC and HTTP3 - curl_version_info: offer quic (and h3) library info - curl_version_info: provide nghttp2 details - defines: avoid underscore-prefixed defines - docs/ALTSVC: remove what works and the experimental explanation - docs/EXPERIMENTAL: explain what it means and what's experimental now - docs/MANUAL.md: converted to markdown from plain text - docs/examples/curlx: fix errors - docs: s/curl_debug/curl_dbg_debug in comments and docs - easy: resize receive buffer on easy handle reset - examples: Avoid reserved names in hiperfifo examples - examples: add http3.c, altsvc.c and http3-present.c - http09: disable HTTP/0.9 by default in both tool and library - http2: when marked for closure and wanted to close == OK - http2_recv: trigger another read when the last data is returned - http: fix use of credentials from URL when using HTTP proxy - http_negotiate: improve handling of gss_init_sec_context() failures - md4: Use our own MD4 when no crypto libraries are available - multi: call detach_connection before Curl_disconnect - nss: use TLSv1.3 as default if supported - openssl: build warning free with boringssl - openssl: use SSL_CTX_set__proto_version() when available - plan9: add support for running on Plan 9 - progress: reset download/uploaded counter between transfers - readwrite_data: repair setting the TIMER_STARTTRANSFER stamp - scp: fix directory name length used in memcpy - smb: init *msg to NULL in smb_send_and_recv() - smtp: check for and bail out on too short EHLO response - source: remove names from source comments - spnego_sspi: add typecast to fix build warning - src/makefile: fix uncompressed hugehelp.c generation - ssh-libssh: do not specify O_APPEND when not in append mode - ssh: move code into vssh for SSH backends - sspi: fix memory leaks - tests: Replace outdated test case numbering documentation - tftp: return error when packet is too small for options - timediff: make it 64 bit (if possible) even with 32 bit time_t - travis: reduce number of torture tests in 'coverage' - url: make use of new HTTP version if alt-svc has one - urlapi: verify the IPv6 numerical address - urldata: avoid 'generic', use dedicated pointers - vauth: Use CURLE_AUTH_ERROR for auth function errors * Removed patches: - curl-CVE-2018-0500.patch - curl-CVE-2018-14618.patch - curl-CVE-2018-16839.patch - curl-CVE-2018-16840.patch - curl-CVE-2018-16842.patch - curl-CVE-2018-16890.patch - curl-CVE-2019-3822.patch - curl-CVE-2019-3823.patch - curl-CVE-2019-5436.patch - curl-CVE-2019-5481.patch - curl-CVE-2019-5482.patch - Security fix: [bsc#1149496,CVE-2019-5482] * TFTP small blocksize heap buffer overflow * Added curl-CVE-2019-5482.patch - Security fix: [bsc#1149495,CVE-2019-5481] * FTP-KRB: double-free during kerberos FTP data transfer * Added curl-CVE-2019-5481.patch - Update to 7.65.3 * progress: make the progress meter appear again - Update to 7.65.2 * Bugfixes: - CIPHERS.md: Explain Schannel error SEC_E_ALGORITHM_MISMATCH - CMake: Fix finding Brotli on case-sensitive file systems - CURLOPT_RANGE.3: Caution against using it for HTTP PUT - CURLOPT_SEEKDATA.3: fix variable name - bindlocal: detect and avoid IP version mismatches in bind() - build: fix Codacy warnings - c-ares: honor port numbers in CURLOPT_DNS_SERVERS - config-os400: add getpeername and getsockname defines - configure: --disable-progress-meter - configure: fix --disable-code-coverage - configure: more --disable switches to toggle off individual features - configure: remove CURL_DISABLE_TLS_SRP - conn_maxage: move the check to prune_dead_connections() - curl: skip CURLOPT_PROXY_CAPATH for disabled-proxy builds - docs: Explain behavior change in --tlsv1. options since 7.54 - docs: Fix links to OpenSSL docs - docs: fix string suggesting HTTP/2 is not the default - headers: Remove no longer exported functions - http2: call done_sending on end of upload - http2: don't call stream-close on already closed streams - http2: remove CURL_DISABLE_TYPECHECK define - http: allow overriding timecond with custom header - http: clarify header buffer size calculation - krb5: fix compiler warning - lib: Use UTF-8 encoding in comments - libcurl: Restrict redirect schemes to HTTP, HTTPS, FTP and FTPS - multi: enable multiplexing by default (again) - multi: fix the transfer hashes in the socket hash entries - multi: make sure 'data' can present in several sockhash entries - netrc: Return the correct error code when out of memory - nss: don't set unused parameter - nss: inspect returnvalue of token check - nss: only cache valid CRL entries - openssl: define HAVE_SSL_GET_SHUTDOWN based on version number - openssl: disable engine if OPENSSL_NO_UI_CONSOLE is defined - openssl: fix pubkey/signature algorithm detection in certinfo - os400: make vsetopt() non-static as Curl_vsetopt() for os400 support - quote.d: asterisk prefix works for SFTP as well - runtests: keep logfiles around by default - runtests: report single test time + total duration - test1165: verify that CURL_DISABLE_ symbols are in sync - test1521: adapt to SLISTPOINT - test1523: test CURLOPT_LOW_SPEED_LIMIT - test153: fix content-length to avoid occasional hang - test188/189: fix Content-Length - tests: have runtests figure out disabled features - tests: support non-localhost HOSTIP for dict/smb servers - tests: update fixed IP for hostip/clientip split - tool_cb_prg: Fix integer overflow in progress bar - typecheck: CURLOPT_CONNECT_TO takes an slist too - typecheck: add 3 missing strings and a callback data pointer - unit1654: cleanup on memory failure - unpause: trigger a timeout for event-based transfers - url: Fix CURLOPT_MAXAGE_CONN time comparison - Rebased patch curl-use_OPENSSL_config.patch - Disable new added failing test1165 - Update to 7.65.1 * Bugfixes: - CURLOPT_LOW_SPEED_* repaired - NTLM: reset proxy "multipass" state when CONNECT request is done - PolarSSL: deprecate support step 1. Removed from configure - cmake: check for if_nametoindex() - cmake: support CMAKE_OSX_ARCHITECTURES when detecting SIZEOF variables - conncache: Remove the DEBUGASSERT on length check - conncache: make "bundles" per host name when doing proxy tunnels - curl_share_setopt.3: improve wording - dump-header.d: spell out that no headers == empty file - example/http2-download: fix format specifier - examples: cleanups and compiler warning fixes - http2: Stop drain from being permanently set - http: don't parse body-related headers in bodyless responses - md4: build correctly with openssl without MD4 - md4: include the mbedtls config.h to get the MD4 info - multi: track users of a socket better - nss: allow to specify TLS 1.3 ciphers if supported by NSS - parse_proxy: make sure portptr is initialized - parse_proxy: use the IPv6 zone id if given - sectransp: handle errSSLPeerAuthCompleted from SSLRead() - singlesocket: use separate variable for inner loop - ssl: Update outdated "openssl-only" comments for supported backends - tests: add HAProxy keywords - tests: make test 1420 and 1406 work with rtsp-disabled libcurl - tls13-docs: mention it is only for OpenSSL >= 1.1.1 - tool_setopt: for builds with disabled-proxy, skip all proxy setopts() - url: fix bad feature-disable #ifdef - url: use correct port in ConnectionExists() - Update to 7.65.0 [bsc#1135176, CVE-2019-5435][bsc#1135170, CVE-2019-5436] * Changes: - CURLOPT_DNS_USE_GLOBAL_CACHE: removed - CURLOPT_MAXAGE_CONN: set the maximum allowed age for conn reuse - pipelining: removed * Bugfixes: - CVE-2019-5435: Integer overflows in curl_url_set - CVE-2019-5436: tftp: use the current blksize for recvfrom() - --config: clarify that initial : and = might need quoting - CURLMOPT_TIMERFUNCTION.3: warn about the recursive risk - CURLOPT_ADDRESS_SCOPE: fix range check and more - CURLOPT_CHUNK_BGN_FUNCTION.3: document the struct and time value - CURLOPT_READFUNCTION.3: see also CURLOPT_UPLOAD_BUFFERSIZE - CURL_MAX_INPUT_LENGTH: largest acceptable string input size - Curl_disconnect: treat all CONNECT_ONLY connections as "dead" - OS400/ccsidcurl: replace use of Curl_vsetopt - OpenSSL: Report -fips in version if OpenSSL is built with FIPS - WRITEFUNCTION: add missing set_in_callback around callback - altsvc: Fix building with cookies disabled - auth: Rename the various authentication clean up functions - base64: build conditionally if there are users - cmake: avoid linking executable for some tests with cmake 3.6+ - cmake: clear CMAKE_REQUIRED_LIBRARIES after each use - cmake: set SSL_BACKENDS - configure: avoid unportable '==' test(1) operator - configure: error out if OpenSSL wasn't detected when asked for - configure: fix default location for fish completions - cookie: Guard against possible NULL ptr deref - curl: make code work with protocol-disabled libcurl - curl: report error for "--no-" on non-boolean options - curlver.h: use parenthesis in CURL_VERSION_BITS macro - docs/INSTALL: fix broken link - doh: acknowledge CURL_DISABLE_DOH - doh: disable DOH for the cases it doesn't work - examples: remove unused variables - ftplistparser: fix LGTM alert "Empty block without comment" - hostip: acknowledge CURL_DISABLE_SHUFFLE_DNS - http: Ignore HTTP/2 prior knowledge setting for HTTP proxies - http: acknowledge CURL_DISABLE_HTTP_AUTH - http: mark bundle as not for multiuse on < HTTP/2 response - http_digest: Don't expose functions when HTTP and Crypto Auth are disabled - http_negotiate: do not treat failure of gss_init_sec_context() as fatal - http_ntlm: Corrected the name of the include guard - http_ntlm_wb: Handle auth for only a single request - http_ntlm_wb: Return the correct error on receiving an empty auth message - lib509: add missing include for strdup - lib557: initialize variables - mbedtls: enable use of EC keys - mime: acknowledge CURL_DISABLE_MIME - multi: improved HTTP_1_1_REQUIRED handling - netrc: acknowledge CURL_DISABLE_NETRC - nss: allow fifos and character devices for certificates - nss: provide more specific error messages on failed init - ntlm: Fix misaligned function comments for Curl_auth_ntlm_cleanup - ntlm: Support the NT response in the type-3 when OpenSSL doesn't include MD4 - openssl: mark connection for close on TLS close_notify - openvms: Remove pre-processor for SecureTransport - parse_proxy: use the URL parser API - parsedate: disabled on CURL_DISABLE_PARSEDATE - pingpong: disable more when no pingpong protocols are enabled - polarssl_threadlock: remove conditionally unused code - progress: acknowledge CURL_DISABLE_PROGRESS_METER - proxy: acknowledge DISABLE_PROXY more - resolve: apply Happy Eyeballs philosophy to parallel c-ares queries - revert "multi: support verbose conncache closure handle" - sasl: Don't send authcid as authzid for the PLAIN mechanism as per RFC 4616 - sasl: only enable if there's a protocol enabled using it - singleipconnect: show port in the verbose "Trying ..." message - socks5: user name and passwords must be shorter than 256 - socks: fix error message - socksd: new SOCKS 4+5 server for tests - spnego_gssapi: fix return code on gss_init_sec_context() failure - ssh-libssh: remove unused variable - ssh: define USE_SSH if SSH is enabled (any backend) - ssh: move variable declaration to where it's used - test1002: correct the name - test2100: Fix typos in test description - tests: Run global cleanup at end of tests - tests: make Impacket (SMB server) Python 3 compatible - tool_cb_wrt: fix bad-function-cast warning - tool_formparse: remove redundant assignment - tool_help: Warn if curl and libcurl versions do not match - tool_help: include for strcasecmp - url: always clone the CUROPT_CURLU handle - url: convert the zone id from a IPv6 URL to correct scope id - urlapi: add CURLUPART_ZONEID to set and get - urlapi: increase supported scheme length to 40 bytes - urlapi: require a non-zero host name length when parsing URL - urlapi: stricter CURLUPART_PORT parsing - urlapi: strip off zone id from numerical IPv6 addresses - urlapi: urlencode characters above 0x7f correctly - vauth/cleartext: update the PLAIN login to match RFC 4616 - vauth/oauth2: Fix OAUTHBEARER token generation - vauth: Fix incorrect function description for Curl_auth_user_contains_domain - vtls: fix potential ssl_buffer stack overflow - wildcard: disable from build when FTP isn't present - xattr: skip unittest on unsupported platforms ==== desktop-file-utils ==== - Add 0001-add-font-as-valid-media-type.patch from upstream to let update-desktop-database recognize font media types (bsc#1148080) - Revert pkconfig package name change back to correct pkg-config. - Add desktop-file-utils-add-Pantheon.patch: Backporting upstream patch to Add Pantheon to desktop env list(fdo#105785 bnc#1094774). - Move RPM macros to %_rpmmacrodir. - suse-update-mime-defaults requires coreutils and awk add both to package requires ==== device-mapper ==== Subpackages: libdevmapper-event1_03 libdevmapper1_03 libdevmapper1_03-32bit - Fix unknown feature in status message (bsc#1135984) + bug-1135984_cache-support-no_discard_passdown.patch - Fix using device aliases with lvmetad (bsc#1137296) + bug-1137296_pvremove-vgextend-fix-using-device-aliases-with-lvmetad.patch - Fix devices drop open error message (bsc#1122666) + bug-1122666_devices-drop-open-error-message.patch - Use %make_build in order to provide verbose output. ==== expat ==== Subpackages: libexpat1 libexpat1-32bit - Security fix (CVE-2019-15903, bsc#1149429) * Crafted XML input results in heap-based buffer over-read by fooling the parser into changing from DTD parsing to document parsing * Added patches: - expat-CVE-2019-15903.patch - expat-CVE-2019-15903-tests.patch ==== ghostscript ==== Subpackages: ghostscript-x11 - CVE-2019-10216.patch fixes CVE-2019-10216 forceput/superexec in .buildfont1 is still accessible https://bugzilla.suse.com/show_bug.cgi?id=1144621 bsc#1144621 https://bugs.ghostscript.com/show_bug.cgi?id=701394 ==== ibus ==== Subpackages: ibus-gtk ibus-gtk3 ibus-lang libibus-1_0-5 typelib-1_0-IBus-1_0 - Add ibus-CVE-2019-14822.patch: Fix misconfiguration of the DBus server allows to unprivileged user could monitor and send method calls to the ibus bus of another user(CVE-2019-14822 bnc#1150011). ==== kernel-source ==== Version update (5.3.rc7 -> 5.3.0) Subpackages: kernel-default kernel-vanilla - Update config files. Disable CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT. Not all drivers are ready for this yet, so enabling this config option causes regressions. See bsc#1150577 for an example. - commit 76ac02e - Delete patches.suse/0001-iommu-vt-d-Fix-race-condition-in-add_unmap.patch. - commit b0363d2 - Update to 5.3 final - Eliminated 3 patches - Refresh configs - NF_CONNTRACK_SLP is gone - commit 6baef36 - Move guarded patch into it's own out of tree section - commit 081b55b - powerpc/pseries: correctly track irq state in default idle (bsc#1150727 ltc#178925). - commit 97a4665 - series.conf: Add note on why pcc-cpufreq patch is being held for evaluation - commit a514b48 - Delete patches.suse/netfilter-ip_conntrack_slp.patch (FATE#324143 jsc#SLE-8944 bsc#1127886). This veteran out of tree patch is no longer needed since the userspace conntrack helper (in conntrack-tools / conntrackd) has reached Factory. - commit d6f0b71 - Update and reenable patches.suse/Revert-netfilter-conntrack-remove-helper-hook-again.patch (FATE#324143 jsc#SLE-8944 bsc#1127886). - commit 029452e - powerpc: dump kernel log before carrying out fadump or kdump (bsc#1149940 ltc#179958). - commit 4b365d2 - Refresh patches.suse/net-ibmvnic-Fix-missing-in-__ibmvnic_reset.patch. - commit 0ebba63 - series.conf: update sorted section banner Make the commit above sorted section less ambiguous. In particular, state clearly that patches without Git-commit which cannot be handled by git-sort do not belong in it. - commit 1506bb8 - series.conf: move unsortable patch out of sorted section Patch without Git-commit cannot be sorted so that there is no point having it into the sorted section. - commit f18376e - net/ibmvnic: Fix missing { in __ibmvnic_reset (bsc#1149652 ltc#179635). - commit a3cd2bf - net/ibmvnic: free reset work of removed device from queue (bsc#1149652 ltc#179635). - commit e64984b - Refresh patches.suse/xfs-repair-malformed-inode-items-during-log-recovery.patch. - commit cbb6da0 - config: enable SLAB_FREELIST_HARDENED (bsc#1127808) Enable SLAB_FREELIST_HARDENED on all architectures. This obscures the free object pointer on a per-cache basis making it more difficult to locate kernel objects via exploits probing the cache metadata. This change was requested by the upstream openSUSE community to make the kernel more resistent to slab freelist attacks. Tests conducted by the kernel performance teams confirmed that the performance impact is detectable but negligible. - commit 39e9013 - rpm/constraints.in: lower disk space required for ARM With a requirement of 35GB, only 2 slow workers are usable for ARM. Current aarch64 build requires 27G and armv6/7 requires 14G. Set requirements respectively to 30GB and 20GB. - commit f84c163 - Update to 5.3-rc8 - refresh armv6hl configs (IXP4xx drivers no longer visible) - commit 3dea797 - config: enable STACKPROTECTOR_STRONG also on armv6hl Recently reenabled armv6hl architecture has STACKPROTECTOR_STRONG disabled, enable it here as well. - commit 8c0677d - powerpc/tm: Fix restoring FP/VMX facility incorrectly on interrupts (CVE-2019-15031 bsc#1149713). - powerpc/tm: Fix FP/VMX unavailable exceptions inside a transaction (CVE-2019-15030 bsc#1149713). - commit ca72e89 - series.conf: move unsortable patch out of sorted section - commit 8a360b5 - powerpc/xmon: Add a dump of all XIVE interrupts (bsc#1142019). - powerpc/xive: Fix dump of XIVE interrupt under pseries (bsc#1142019). - powerpc/xmon: Check for HV mode when dumping XIVE info from OPAL (bsc#1142019). - commit 68e4d5a - Enable klp-convert patches Enable patches.suse/livepatch-create-and-include-UAPI-headers.patch Enable and refresh patches.suse/livepatch-modpost-ignore-unresolved-symbols.patch Still not in upstream. Submitted though. It seems the final upstream version will be a bit different, but we need these two patches for our use case. - commit f385ff2 - Enable patches.suse/livepatch-mark-the-kernel-unsupported-when-disabling.patch Still SUSE-specific and still needed. - commit cd16e71 ==== kpat ==== Subpackages: kpat-lang - Add FcSolveSolver-cleanup-ressources.patch to fix crashes due to resource exhaustion (boo#1146622, kde#395624) ==== krb5 ==== Subpackages: krb5-32bit - Integrate pam_keyinit pam module, ksu-pam.d; (bsc#1081947); (bsc#1144047); ==== libdrm ==== Subpackages: libdrm2 libdrm_amdgpu1 libdrm_intel1 libdrm_nouveau2 libdrm_radeon1 - U_intel-sync-i915_pciids.h-with-kernel-aml.patch * adds support for Amberlake (jira #SLE-4989, bsc#1137515) - U_intel-sync-i915_pciids.h-with-kernel-cml.patch * adds support for Cometalke (jira #SLE-4983, bsc#1137515) ==== libreoffice ==== Version update (6.2.5.2 -> 6.2.7.1) Subpackages: libreoffice-base libreoffice-base-drivers-firebird libreoffice-branding-upstream libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-ar libreoffice-l10n-bg libreoffice-l10n-bs libreoffice-l10n-ca libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-eo libreoffice-l10n-es libreoffice-l10n-et libreoffice-l10n-fa libreoffice-l10n-fi libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-id libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-ko libreoffice-l10n-lt libreoffice-l10n-nb libreoffice-l10n-nl libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-sk libreoffice-l10n-sl libreoffice-l10n-sv libreoffice-l10n-uk libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-write r libreofficekit - Update to 6.2.7.1: bsc#1149944 VUL-0: CVE-2019-9854 Unsafe URL assembly flaw bsc#1149943 VUL-0: CVE-2019-9855 path equivalence handling flaw - Drop merged patch: * 0001-Fix-buidling-with-older-boost.patch - Add patch to fix build with SLE12 boost: * 0001-Fix-buidling-with-older-boost.patch - Update to 6.2.6.2 bsc#1146098 CVE-2019-9850 bsc#1146105 CVE-2019-9851 bsc#1146107 CVE-2019-9852: * Various bugfixes of 6.2 branch - Fix bsc#1133534 LO-L3: [PPTX] SmartArt: Basic rendering of Trapezoid List * bsc1133534.patch ==== libstorage-ng ==== Version update (4.2.3 -> 4.2.11) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - Translated using Weblate (Catalan) (bsc#1149754) - 4.2.11 - merge gh#openSUSE/libstorage-ng#671 - added integration test - 4.2.10 - merge gh#openSUSE/libstorage-ng#670 - added notes - 4.2.9 - merge gh#openSUSE/libstorage-ng#668 - removed unneeded code - cleanup integration tests - code cleanup - 4.2.8 - Translated using Weblate (Japanese) - 4.2.7 - Translated using Weblate (Slovak) - 4.2.6 - Translated using Weblate (Portuguese (Brazil)) - Translated using Weblate (Dutch) - Translated using Weblate (Czech) - merge gh#openSUSE/libstorage-ng#667 - update pot and po files - 4.2.5 - merge gh#openSUSE/libstorage-ng#666 - added note - use dev_t to save major and minor numbers - improved unit test - coding style - consistent function name - added support for plain encryption (bsc#1088641) - added unit test - added integration tests - 4.2.4 ==== libvirt ==== Version update (5.1.0 -> 5.7.0) Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-driver-interface libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-gluster libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-qemu libvirt-libs - Update to libvirt 5.7.0 - Experimental split of libvirtd into separate daemons - bsc#1145440, bsc#1145586 - Many incremental improvements and bug fixes, see https://libvirt.org/news.html - Dropped patches: 4ec3cf9a-apparmor-rules.patch, f38ef0fa-no-RDMA-check.patch, 411cdaf8-apparmor-check-profile-name.patch. 696239ba-qemu-fix-query-cpus-fast.patch, 09eb1ae0-conf-add-xenbus-controller.patch, fb059757-libxl-add-xenbus-controller.patch, ec5a1191-libxl-support-max-grant-frames.patch, 5a64c202-xenconfig-support-max-grant-frames.patch, CVE-2019-3886-api.patch, CVE-2019-3886-remote.patch, e0246257-cputest-add-data-for-Cascadelake-Server.patch, 5cd9db3a-cputest-add-data-E3-1225-v5.patch, 538d8735-cpu_map-Define-md-clear-CPUID-bit.patch, 96f41cd7-admin-reject-clients.patch, f111e094-locking-restrict-sockets-to-mode-0600.patch, e37bd65f-logging-restrict-sockets-to-mode-0600.patch, 9f4e35dc-network-improve-chain-create-error-report.patch, 686803a1-network-split-ipv4-ipv6-chains.patch, c1c235eb-nework-clear-cached-error.patch, 4330d138-network-refactor-global-chains.patch, 3b66bd9a-add-debug-chain-creation.patch, c6cbe187-network-delay-global-fw-setup.patch, CVE-2019-10161-api-disallow-virDomainSaveImageGetXMLDesc.patch, CVE-2019-10166-api-disallow-virDomainManagedSaveDefineXML.patch, CVE-2019-10167-api-disallow-virConnectGetDomainCapabilities.patch, CVE-2019-10168-api-disallow-virConnect-HypervisorCPU.patch, 51f9f80d-fix-copying-bitmaps.patch, 2878278c-cpu_map-add-Cascaselake-Server.patch, 4a0f604d-cpu_map-distribute-Cascaselake-Server.patch, d5572f62-qemu-support-override-max-thread.patch, 673f805d-qemu-chown-uniqDir.patch, 975b004d-virtlogd-over-logrotate.patch, 18d47d61-revert-d00c77ae.patch, d6943eab-libxl-pmsuspend-event.patch, 3d179919-virsh-precopy-bandwidth.patch, f4bdd829-rename-precopy-bandwidth.patch, xen-pv-cdrom.patch, blockcopy-check-dst-identical-device.patch, suse-libvirtd-service-xen.patch, xen-sxpr-disk-type.patch - virsh: use upstream name for migration precopy bandwidth parameter f4bdd829-rename-precopy-bandwidth.patch bsc#1145586 - virsh: support for setting precopy bandwidth in migrate 3d179919-virsh-precopy-bandwidth.patch bsc#1145586 - Rename patches to include commit ID revert-d00c77ae.patch -> 18d47d61-revert-d00c77ae.patch libxl-pmsuspend-event.patch -> d6943eab-libxl-pmsuspend-event.patch - libxl: fix domain state following successful suspend operation revert-d00c77ae.patch, libxl-pmsuspend-event.patch bsc#1145440 - logging: ensure virtlogd rollover takes priority over logrotate 975b004d-virtlogd-over-logrotate.patch bsc#1137137 - qemu: fix default value of security_default_confined Updated suse-qemu-conf.patch bsc#1143871 - qemu: Change owner of temp directories under /var/lib/libvirt/qemu 673f805d-qemu-chown-uniqDir.patch bsc#1143497 - Add apparmor-abstractions as a required package for daemon (bsc#1142992) - qemu: Add support for overriding max threads per process limit d5572f62-qemu-support-override-max-thread.patch bsc#1133719 - cpu_map: Add Cascadelake-Server CPU model e0246257-cputest-add-data-for-Cascadelake-Server.patch, 2878278c-cpu_map-add-Cascaselake-Server.patch, 4a0f604d-cpu_map-distribute-Cascaselake-Server.patch bsc#1141251 - util: fix copying bitmap to larger data buffer 51f9f80d-fix-copying-bitmaps.patch bsc#1138734 ==== lmdb ==== - Fix occasional crash when freed pages landed on the dirty list twice (bnc#1136132). * Add 0001-ITS-8756-remove-loose-pg-from-dirty-list-in-freelist.patch ==== lvm2 ==== Subpackages: liblvm2app2_2 liblvm2cmd2_02 - Fix unknown feature in status message (bsc#1135984) + bug-1135984_cache-support-no_discard_passdown.patch - Fix using device aliases with lvmetad (bsc#1137296) + bug-1137296_pvremove-vgextend-fix-using-device-aliases-with-lvmetad.patch - Fix devices drop open error message (bsc#1122666) + bug-1122666_devices-drop-open-error-message.patch - Use %make_build in order to provide verbose output. ==== makedumpfile ==== Version update (1.6.3 -> 1.6.6) - makedumpfile-Increase-SECTION_MAP_LAST_BIT-to-4.patch: Increase SECTION_MAP_LAST_BIT to 4 (bsc#1144708). - Update to 1.6.6 * Support for AMD Secure Memory Encryption * Exclude pages that are logically offline * Support kernels up to 5.1.9 - Drop makedumpfile-coptflags.diff. - Also support extended address space with SLE 12 SP5 (bsc#1138451) * refresh makedumpfile-ppc64-VA-range-SUSE.patch - makedumpfile-ppc64-VA-range-SUSE.patch: Use correct l3 index size with SLE15-SP1 ppc64le kernels (bsc#1123015). - Update to 1.6.5 * Improve support for arm64 system with KASLR * Support kernels up to 4.19.4 - Update to 1.6.4 * 5-level paging support on x86_64 * --mem-usage support for arm64 * Support larger VA size with newer ppc64 kernels (bsc#1118445). * Support kernels up to 4.17.0 - Drop upstreamed patches: * makedumpfile-always-use-bigger-SECTION_MAP_MASK.patch * makedumpfile-sadump-fix-PTI-enabled-kernels.patch * makedumpfile-do-not-print-ETA-if-progress-is-0.patch * makedumpfile-is_cache_page-helper.patch * makedumpfile-check-PG_swapbacked.patch - Fix %license destination for older distributions. - Merge SLE12 changelog. - Patches that were never actually applied to Factory: * makedumpfile-x86_64-xen-vtop.patch (included in 1.6.2) * makedumpfile-Fix-elf_info-file_size-if-segment-excluded.patch (included in 1.6.2) - makedumpfile-Fix-elf_info-file_size-if-segment-excluded.patch: elf_info: Fix file_size if segment is excluded (bsc#1068925). - makedumpfile-x86_64-xen-vtop.patch: Fix the use of Xen physical and machine addresses (bsc#1014136, bsc#1068694). - makedumpfile-is_cache_page-helper.patch: Add is_cache_page() helper to check if a page belongs to the cache (bsc#1088354). - makedumpfile-check-PG_swapbacked.patch: Check PG_swapbacked for swap cache pages (bsc#1088354). - makedumpfile-do-not-print-ETA-if-progress-is-0.patch: Do not print ETA value if current progress is 0 (bsc#1084936). - Use %license instead of %doc [bsc#1082318] - makedumpfile-sadump-fix-PTI-enabled-kernels.patch: sadump: Fix a problem of PTI enabled kernel (bsc#1085826). - makedumpfile-always-use-bigger-SECTION_MAP_MASK.patch: Always use bigger SECTION_MAP_MASK (bsc#1066811, bsc#1067703). - Update to 1.6.3 * Support kernels up to 4.14.8 (bsc#1068864). * 86_64: handle renamed init_level4_pgt -> init_top_pgt * Fix SECTION_MAP_MASK for kernel >= v.13 * book3s/ppc64: Lower the max real address to 53 bits for kernels >= v4.11 * Support symbol __cpu_online_mask * ppc64: update hash page table geometry - Drop upstreamed patches: * makedumpfile-Fix-SECTION_MAP_MASK-for-kernel-v.13.patch * makedumpfile-handle-renamed-init_level4_pgt-init_top_pgt.patch * makedumpfile-ppc64-update-hash-page-table-geometry.patch * makedumpfile-book3s-ppc64-Lower-the-max-real-address-to-53-bits.patch * makedumpfile-__cpu_online_mask-symbol.patch * makedumpfile-vtop4_x86_64_pagetable.patch * makedumpfile-fix-KASLR-for-sadump.patch * makedumpfile-fix-KASLR-for-sadump-while-kdump.patch * makedumpfile-support-4.12.patch - Drop SLE12-specific patches: * makedumpfile-ppc64-update-hash-page-table-geometry.patch * makedumpfile-Revert-Clean-up-unused-KERNEL_IMAGE_SIZE.patch * makedumpfile-Revert-x86_64-kill-some-unused-init.patch * makedumpfile-Revert-kill-is_vmalloc_addr_x86_64.patch * makedumpfile-Revert-x86_64-translate-all-VA-to-PA-using-pgt.patch * makedumpfile-Revert-Calculate-page_offset-from-pt_load.patch - makedumpfile-__cpu_online_mask-symbol.patch: Support symbol __cpu_online_mask (FATE#323473, bsc#1070291). - makedumpfile-vtop4_x86_64_pagetable.patch: Introduce vtop4_x86_64_pagetable (FATE#323473, bsc#1070291). - makedumpfile-fix-KASLR-for-sadump.patch: Fix a KASLR problem of sadump (FATE#323473, bsc#1070291). - makedumpfile-fix-KASLR-for-sadump-while-kdump.patch: sadump: Fix a KASLR problem of sadump while kdump is working (FATE#323473, bsc#1070291). - makedumpfile-Revert-Clean-up-unused-KERNEL_IMAGE_SIZE.patch: Revert "Clean up unused KERNEL_IMAGE_SIZE" (bsc#1068925, bsc#1099121). - makedumpfile-Revert-x86_64-kill-some-unused-init.patch: Revert "x86_64: kill some unused initialization" (bsc#1068925, bsc#1099121). - makedumpfile-Revert-kill-is_vmalloc_addr_x86_64.patch: Revert "x86_64: kill is_vmalloc_addr_x86_64()" (bsc#1068925, bsc#1099121). - makedumpfile-Revert-x86_64-translate-all-VA-to-PA-using-pgt.patch: Revert "x86_64: translate all VA to PA using page table values" (bsc#1068925, bsc#1099121). - makedumpfile-Revert-Calculate-page_offset-from-pt_load.patch: Revert "x86_64: Calculate page_offset from pt_load" (bsc#1068925, bsc#1040469, bsc#1099121). - makedumpfile-ppc64-update-hash-page-table-geometry.patch: Kernel commit f6eedbba7a26 ("powerpc/mm/hash: Increase VA range to 128TB") updated hash page table geometry. A modified version of this commit is included in SLES12 SP3. Make the corresponding changes in makedumpfile tool for filtering dump appropriately (bsc#1068485) - ppc64 Can't convert a virtual address (bsc#1067703) * Added patches: makedumpfile-ppc64-update-hash-page-table-geometry.patch makedumpfile-book3s-ppc64-Lower-the-max-real-address-to-53-bits.patch * Refresh makedumpfile-Fix-SECTION_MAP_MASK-for-kernel-v.13.patch to also apply to SLE15 (4.12 kernel) due to backport of 2d070eab2e82 (bsc#1067703) - Handled renaming of init_level4_pgt to init_top_pgt (bsc#1066770). * Added patch: makedumpfile-handle-renamed-init_level4_pgt-init_top_pgt.patch - add makedumpfile-Fix-SECTION_MAP_MASK-for-kernel-v.13.patch (bnc#1066811) - Update to 1.6.2 * Fix the use of Xen physical and machine addresses (bsc#1014136) * Fix memory leak in get_kcore_dump_loads() * Support kernels up to 4.11.7 * Consider not page-size aligned phys_end for paddr_to_pfn() * Add runtime kaslr offset if it exists - Update to 1.6.1 (FATE#322011). * Enhance support for aarch64 * Enhance support for ppc64 * Support kernels up to 4.8 - Drop upstreamed patch * makedumpfile-_count-_refcount-rename.patch - Merge with updates on SLE12 SP2 (FATE#318012, bsc#992885, bsc#999869). - Rename Support-_count-_refcount-rename-in-struct-p.patch to makedumpfile-_count-_refcount-rename.patch. - Silence rpmlint errors about devel files in non-devel package; despite their .c suffix, the provided eppic scripts are intended for production, not development. - Build and install the eppic extension. - makedumpfile-override-libtinfo.patch: Allow to override the tinfo library used for eppic. - Update to 1.6.0 (FATE#320955). * Exclude page structures of non-dumped pages. - Drop upstreamed patch * Looking-for-page.compound_order-compound_dtor-.patch * Skip-examining-compound-tail-pages.patch - Looking-for-page.compound_order-compound_dtor-.patch: fix excluding hugepages (kernel 4.4 compatibility) - Skip-examining-compound-tail-pages.patch fix excluding compound tail pages (kernel 4.5 compatibility) - Support-_count-_refcount-rename-in-struct-p.patch: support 4.7 kernel (page._count renamed to page._refcount) - Update to 1.5.9 * support for aarch64 (FATE#318444) * Support kernels up to 4.1 * Enable compressed dump formats for Xen (FATE#316467). - Drop upstreamed patch * makedumpfile-add-aarch64.diff - Use url for source - Cleanup spec file with spec-cleaner - Adjust usage of install (-c is ignored) - makedumpfile-add-aarch64.diff: Add support for aarch64 This patch should be oboslet when switching to 1.5.9 - upgrade to makedumpfile-1.5.8 o Fair I/O workload assignment for --split o Make incomplete dumpfile readable o Support kernels up to 3.19 ==== openldap2 ==== Subpackages: libldap-2_4-2 libldap-2_4-2-32bit libldap-data openldap2-client - bsc#1143194 (CVE-2019-13565) - ssf memory reuse leads to incorrect authorisation of another connection, granting excess connection rights (ssf). * patch: 0201-ITS-9052-zero-out-sasl_ssf-in-connection_init.patch - bsc#1143273 (CVE-2019-13057) - rootDN of a backend may proxyauth incorrectly to another backend, violating multi-tenant isolation. * patch: 0202-ITS-9038-restrict-rootDN-proxyauthz-to-its-own-DBs.patch * patch: 0203-ITS-9038-Update-test028-to-test-this-is-enforced.patch * patch: 0204-ITS-9038-Another-test028-typo.patch - bsc#1111388 - incorrect post script call causes tmpfiles create not to be run. - bsc#1114845 - broken shebang line in openldap_update_modules_path.sh - fix the script - Emergency fix: move tmpfiles_create post from the library package to the main package's post script, which ships the tmpfiles.d configuration. Fixes the post script of the library (-p /sbin/ldconfig does not allow more statements in the script). - bsc#1111388 openldap and /var/lib/ldap/DB_CONFIG* (transactional-update) * source: openldap2.conf - Added a patch to let slapd return the uniqueness check filter used before constraint violation to the client. Fixed broken memory handling in affecting error response of slapo-unique ITS#8866 slapo-unique to return filter used in diagnostic message * patch: 0001-ITS-8866-slapo-unique-to-return-filter-used-in-diagn.patch - Don't require systemd explicit, spec file can handle both cases correct and in containers we don't have systemd. - Fix CVE-2017-17740: when both the nops module and the memberof overlay are enabled, attempts to free a buffer that was allocated on the stack * patch: 0017-Fix-segfault-in-nops.patch (bsc#1073313) ==== python-Werkzeug ==== - Add 0001-unique-debugger-pin-in-Docker-containers.patch (bsc#1145383, CVE-2019-14806) When running the development server in Docker, the debugger security pin is now unique per container. ==== python-cairo ==== Subpackages: python2-cairo python3-cairo - Provide python-pycairo symbol to play nice with backporting python stack as new TW contains just this as a proper package name bsc#1142582 ==== python-libvirt-python ==== Version update (5.1.0 -> 5.7.0) - Update to 5.7.0 - Add all new APIs and constants in libvirt 5.7.0 - Update to 5.6.0 - Add all new APIs and constants in libvirt 5.6.0 - Update to 5.5.0 - Add all new APIs and constants in libvirt 5.5.0 - Update to 5.4.0 - Add all new APIs and constants in libvirt 5.4.0 - Update to 5.3.0 - Add all new APIs and constants in libvirt 5.3.0 - Update to 5.2.0 - Add all new APIs and constants in libvirt 5.2.0 ==== python-urllib3 ==== - Add missing dependency on python-six (bsc#1150895) - Update python-urllib3-recent-date.patch to have RECENT_DATE within the needed boundaries for the test suite. - Add urllib3-disallow-control-chars-in-http-urls.patch (bsc#1132663, CVE-2019-11236, bsc#1129071, CVE-2019-9740) - Skip test_source_address_error as we raise different error with fixes that we provide in new python2/3 - Add urllib3-cve-2019-11324.patch. Don't load system certs unless there were no CA certs or SSLContext object specified manually. (bsc#1132900,CVE-2019-11324) ==== samba ==== Version update (4.9.5+git.176.375e1f05788 -> 4.9.5+git.187.71edee57d5a) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr0 libndr0-32bit libnetapi0 libnetapi0-32bit libsamba-credentials0 libsamba-credentials0-32bit libsamba-errors0 libsamba-errors0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-policy0-python3 libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap2 libsmbldap2-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-client samba-client-32bit samba-libs samba-libs-32bit samba-libs-python samba-libs-python3 samba-python3 samba-winbind samba-winbind-32bit - CVE-2019-10197: user escape from share path definition; (bso#14035); (bsc#1141267). - Prepare for use future use of kernel keyrings, modify /etc/pam.d/samba to include pam_keyinit.so; (bsc#1144059). ==== yast2 ==== Version update (4.2.20 -> 4.2.21) Subpackages: yast2-logs - support reading licenses from tar archive (jsc#SLE-7214) - 4.2.21 ==== yast2-control-center ==== Version update (4.1.7 -> 4.2.2) Subpackages: yast2-control-center-qt - Fix appdata for new spec (fate#319035) - 4.2.2 - Display GenericName and Comment, not Name (boo#1084864) - 4.2.1 - Change location of appdataa and fix it up (fate#319035) - 4.2.0 - Require libQt5Svg5 to support SVG icons (bsc#1127245) - 4.1.8 ==== yast2-installation ==== Version update (4.2.12 -> 4.2.13) - do NOT remove /mnt/run, it's a mounted directory (bsc#1149011) - 4.2.13 ==== yast2-network ==== Version update (4.2.11 -> 4.2.12) - bnc#1149234 - apply udev rule from AY profile according to device's mac value when permanent_mac is missing in list of the device's options - bsc#1133442 - Increased the DHCP timeout when NetworkManager is in use to its default (45 seconds). - 4.2.12 ==== yast2-packager ==== Version update (4.2.24 -> 4.2.25) - Added Y2Packager::MediumType class for detecting the installation medium type (related to jsc#SLE-7214) - 4.2.25 ==== yast2-schema ==== Version update (4.2.2 -> 4.2.3) - Ignoring X-SuSE-YaST-AutoInstResourceAliases entries in desktop files while evaluating resources (bsc#1144894). - 4.2.3 ==== yast2-security ==== Version update (4.2.1 -> 4.2.2) - AY: Supporting user defined permission files like "/etc/permissions.ultra". (bsc#1147173) - 4.2.2 ==== yast2-services-manager ==== Version update (4.2.4 -> 4.2.5) - Set BaseTargets::GRAPHICAL and Target::GRAPHICAL if package "xdm" will be installed (instead of xorg-x11-server) (bsc#1140735). - 4.2.5 ==== yast2-storage-ng ==== Version update (4.2.36 -> 4.2.38) - Partitioner: better handling of existing encryptions, including the possibility of reusing them (related to jsc#SLE-7376). - added translation for new EncryptionType::PLAIN (bsc#1088641) - 4.2.38 - bind-mount /run from inst-sys to target system during install (bsc#1136463) - 4.2.37 ==== yast2-ycp-ui-bindings ==== Version update (4.1.0 -> 4.2.1) - added example using scrollbar positions of RichText widget with hyperlinks (bsc#1150498) - 4.2.1 - added example using scrollbar positions of RichText widget (bsc#1150498) - 4.2.0 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20190925 released!
by Dominique Leuenberger 27 Sep '19

27 Sep '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: MozillaFirefox (69.0 -> 69.0.1) boost-base boost-extra branding-openSUSE desktop-translations (84.87.20190508.853b49d2 -> 84.87.20190924.7050555c) ffmpeg-4 (4.2 -> 4.2.1) fipscheck ibus kvm_stat (5.2.13 -> 5.2.14) libXfont2 (2.0.3 -> 2.0.4) libgda (5.2.8 -> 5.2.9) libmanette (0.2.2 -> 0.2.3) libpwquality (1.4.0 -> 1.4.1) libqt5-qtwebkit lightdm (1.28.0 -> 1.30.0) ltrace mcelog (1.62 -> 1.64) nfs-utils nmap opencv3 openexr perl-Perl-Tidy (20190601 -> 20190915) perl-Text-CSV_XS (1.39 -> 1.40) policycoreutils python-certifi (2019.6.16 -> 2019.9.11) python-msgpack (0.6.1 -> 0.6.2) python-qt5 (5.13.0 -> 5.13.1) python-sip (4.19.18 -> 4.19.19) qpdf (9.0.0 -> 9.0.1) sqlite3 vim (8.1.1741 -> 8.1.2052) whois (5.5.0 -> 5.5.1) wicked (0.6.55 -> 0.6.57) wireshark (3.0.3 -> 3.0.5) xorg-x11-server === Details === ==== MozillaFirefox ==== Version update (69.0 -> 69.0.1) Subpackages: MozillaFirefox-translations-common - Mozilla Firefox 69.0.1 * Fixed external programs launching in the background when clicking a link from inside Firefox to launch them (bmo#1570845) * Usability improvements to the Add-ons Manager for users with screen readers (bmo#1567600) * Fixed the Captive Portal notification bar not being dismissable in some situations after login is complete (bmo#1578633) * Fixed the maximum size of fonts in Reader Mode when zoomed (bmo#1578454) * Fixed missing stacks in the Developer Tools Performance section (bmo#1578354) MFSA 2019-31 * CVE-2019-11754 (bmo#1580506) Pointer Lock is enabled with no user notification - disable DOH by default ==== boost-base ==== Subpackages: boost-license1_71_0 boost1_71_0-jam libboost_date_time1_71_0 libboost_filesystem1_71_0 libboost_headers1_71_0-devel libboost_iostreams1_71_0 libboost_locale1_71_0 libboost_program_options1_71_0 libboost_regex1_71_0 libboost_thread1_71_0 - Enable context on riscv64 - riscv-support.patch: Add missing bits for riscv support - Make sure %{_libdir}/cmake is packaged also without openblas-devel ==== boost-extra ==== - Enable context on riscv64 - riscv-support.patch: Add missing bits for riscv support - Make sure %{_libdir}/cmake is packaged also without openblas-devel ==== branding-openSUSE ==== Subpackages: grub2-branding-openSUSE libreoffice-branding-openSUSE plymouth-branding-openSUSE systemd-icon-branding-openSUSE wallpaper-branding-openSUSE xfce4-splash-branding-openSUSE yast2-qt-branding-openSUSE - Avoid bashisms in scriptlets. ==== desktop-translations ==== Version update (84.87.20190508.853b49d2 -> 84.87.20190924.7050555c) - Update to version 84.87.20190924.7050555c: * Unfuzzy YaST groups translations * fix typo * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (German) - The following bug was referenced in SLE 15: * boo#1037823 - Update to version 84.87.20190923.8ea56c56: * Regenerate .po files after some more search-replace for YaST * Run update-po-files.sh after Leap 15.2 update * Update for Leap 15.2 (boo#1145197, bsc#1146886) * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (German) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Italian) * Translated using Weblate (German) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Drop "translation" from English to English * Remove Indonesian from en_US files * Translated using Weblate (German) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Portuguese) * Translated using Weblate (German) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (Portuguese) * Translated using Weblate (Slovak) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Japanese) * Translated using Weblate (Dutch) * Update all po files * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Update update-desktop-files-yast.po * Translated using Weblate (Turkish) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Lao) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Occidental) * Added translation using Weblate (Occidental) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Slovak) * Translated using Weblate (Italian) * Translated using Weblate (Catalan) * Translated using Weblate (Slovak) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * Translated using Weblate (Occidental) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Arabic) * Translated using Weblate (Occidental) * Translated using Weblate (Spanish) * Translated using Weblate (Slovak) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Japanese) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Catalan) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Arabic) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Japanese) * Added translation using Weblate (Occidental) * Translated using Weblate (Slovak) * Added translation using Weblate (Occidental) * Translated using Weblate (Slovak) ==== ffmpeg-4 ==== Version update (4.2 -> 4.2.1) Subpackages: libavcodec58 libavdevice58 libavfilter7 libavformat58 libavresample4 libavutil56 libpostproc55 libswresample3 libswscale5 - Update to version 4.2.1: * Stable bug fix release, mainly codecs and format fixes. - Drop upstream fixed patch: 0001-avcodec-h2645_parse-zero-initialize-the-rbsp-buffer.patch ==== fipscheck ==== Subpackages: libfipscheck1 - Remove #include of unused fips.h to fix build with OpenSSL 1.1.1 (bsc#1149792) * add fipscheck-fips.h_not_needed.patch - Drop obsolete openssl-1_1-port.patch (upstream) ==== ibus ==== Subpackages: ibus-gtk ibus-gtk-32bit ibus-gtk3 ibus-lang libibus-1_0-5 libibus-1_0-5-32bit typelib-1_0-IBus-1_0 - Update hide-setup-menu.patch: make it can be compile in SLE (openSUSE-Leap 15). - Add ibus-CVE-2019-14822-GDBusServer-peer-authorization.patch: bus: Implement GDBusAuthObserver callback, fix CVE-2019-14822. ==== kvm_stat ==== Version update (5.2.13 -> 5.2.14) - Fix our patching for Leap 15.1 (boo#1140899) ==== libXfont2 ==== Version update (2.0.3 -> 2.0.4) - Update to version 2.0.4 * This minor maintenance release cleans up issues found by Coverity and gcc, as well as additional hardening through the use of APIs with stronger bounds checking. - tag COPYING as license ==== libgda ==== Version update (5.2.8 -> 5.2.9) Subpackages: libgda-5_0-4 libgda-5_0-4-lang libgda-5_0-bdb libgda-5_0-sqlite libgda-ui-5_0-4 libgda-ui-5_0-plugins - Update to version 5.2.9: + Fix Sun JRE 1.8 detection. + Fix JDK 11.0 detection. + Drop unneeded JAVAH variable check. + Fix build for System Installed SQLite libs. + Non-Dates and Timestamps values returns 'NULL' string when converted. + Fix --with-ui, now UI is buildable when enabled. - Drop patches fixed upstream: + libgda-jre18.patch. + libgda-jre9.patch. + libgda-jre10.patch. + libgda-5.2.4-nojavah.patch. + libgda-no-libgee.patch. + libgda-enable-gdaui-gi.patch: Fixed upstream. ==== libmanette ==== Version update (0.2.2 -> 0.2.3) - Update to version 0.2.3: + Build system changes: Add 'gudev' option, allowing to explicitly build without gudev. ==== libpwquality ==== Version update (1.4.0 -> 1.4.1) Subpackages: libpwquality-lang libpwquality1 - Update to version 1.4.1: + Minor bugfix update of the library. - Drop libpwquality-pythons.patch: Fixed upstream. Following this, drop autoconf, automake and libtool BuildRequires and autoreconf call. - Use modern macros. - Do not recommend lang package. The lang package already has a supplements. ==== libqt5-qtwebkit ==== Subpackages: libQt5WebKit5 libQt5WebKit5-imports libQt5WebKitWidgets5 - Add patch to fix build on armv6: * webkit-bwo141288.patch ==== lightdm ==== Version update (1.28.0 -> 1.30.0) Subpackages: liblightdm-gobject-1-0 lightdm-lang - Update to version 1.30.0: * Add lightdm_user_get_is_locked (). * Hide users with shell /bin/false. * Remove unity-system-compositor support (dead upstream). * Fix dm-tool crash. * Update documentation. - Refresh patches with quilt. - Use modern macros. ==== ltrace ==== - Fix last change - Use noun phrase in summary. ==== mcelog ==== Version update (1.62 -> 1.64) - mcelog.systemd: Preload the dmi-sysfs kernel module. When /dev/mem can't be read (which is the case when booting in Secure Mode), mcelog can use the dmi-sysfs interface instead, however for that the kernel module needs to be loaded first (bsc#1149186). - Update to version 1.64: * mcelog: Add Icelake client model numbers. * add Hygon Dhyana support to not use mcelog, as Hygon Dhyana(0x18h) share similiar arch with AMD Family 17h ==== nfs-utils ==== Subpackages: libnfsidmap1 nfs-client nfs-doc nfs-kernel-server - Delete 0006-nfs.conf-silence-include-error.patch replaced with better version - 0006-conffile-allow-optional-include-files.patch Avoid error if /etc/nfs.conf.local doesn't exist (bsc#1151044 bsc#1150807) - 0008-mountd-Initialize-logging-early.patch Don't close the loging socket - it causes problems. (bsc#1151044 bsc#1150807) - Don't make /var/lib/nfs owned by statd. Only sm and sm.bak need to be accessible by statd or sm-notify after they drop privs. Providing they get created, the parent directory can be root-owned. - 0007-statd-user-from-sm Change rpc.statd and sm-notify to take uid from the sm directory. (bsc#1150733 CVE-2019-3689) - 0006-nfs.conf-silence-include-error.patch Avoid an unhelpful warning (bsc#1150807) ==== nmap ==== - fix typo in description ==== opencv3 ==== - Disable LTO on ppc64le for now, as it fails to build when enabled (boo#1146096). ==== openexr ==== - testsuite only for x86_64 [bsc#1146648] ==== perl-Perl-Tidy ==== Version update (20190601 -> 20190915) - updated to 20190915 see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md [#]# 2019 09 15 - fixed issue RT#130344: false warning "operator in print statement" for "use lib". - fixed issue RT#130304: standard error output should include filename. When perltidy error messages are directed to the standard error output with -se or --standard-error-output, the message lines now have a prefix 'filename:' for clarification in case multiple files are processed, where 'filename' is the name of the input file. If input is from the standard input the displayed filename is '<stdin>', and if it is from a data structure then displayed filename is '<source_stream>'. - implement issue RT#130425: check mode. A new flag '--assert-tidy' will cause an error message if the output script is not identical to the input script. For completeness, the opposite flag '--assert-untidy' has also been added. The next item, RT#130297, insures that the script will exit with a non-zero exit flag if the assertion fails. - fixed issue RT#130297; the perltidy script now exits with a nonzero exit status if it wrote to the standard error output. Prevously only fatal run errors produced a non-zero exit flag. Now, even non-fatal messages requested with the -w flag will cause a non-zero exit flag. The exit flag now has these values: 0 = no errors 1 = perltidy could not run to completion due to errors 2 = perltidy ran to completion with error messages - added warning message for RT#130008, which warns of conflicting input parameters -iob and -bom or -boc. - fixed RT#129850; concerning a space between a closing block brace and opening bracket or brace, as occurs before the '[' in this line: my @addunix = map { File::Spec::Unix->catfile( @ROOT, @$_ ) } ['b']; Formerly, any space was removed. Now it is optional, and the output will follow the input. - fixed issue git#13, needless trailing whitespace in error message - fixed issue git#9: if the -ce (--cuddled-else) flag is used, do not try to form new one line blocks for a block type specified with -cbl, particularly map, sort, grep - iteration speedup for unchanged code. Previously, when iterations were requested, at least two formatting passes were made. Now just a single pass is made if the formatted code is identical to the input code. - some improved vertical alignments ==== perl-Text-CSV_XS ==== Version update (1.39 -> 1.40) - updated to 1.40 see /usr/share/doc/packages/perl-Text-CSV_XS/ChangeLog 1.40 - 2019-09-15, H.Merijn Brand * Update to Devel::PPPort-3.52 * Development perl is now 5.28.2 * [csv2xlsx] sheetnames are restricted to 31 characters * Generate cpanfile * Add munge type "db" * [csv2xls/csv2xlsx] do not generate xls/xlsx on empty CSV (issue#18) * New: support $csv->formula (sub { ... }) * Support stacked encodings ==== policycoreutils ==== Subpackages: policycoreutils-lang python3-policycoreutils - Added run_init_use_pam_keyinit.patch Added pam_keyinit to the run_init pam config (bsc#1144052) ==== python-certifi ==== Version update (2019.6.16 -> 2019.9.11) - Sync to the latest 2019.9.11: * Updates in enabled CAs ==== python-msgpack ==== Version update (0.6.1 -> 0.6.2) - Update to 0.6.2: * Support Python 3.8. * Update Cython to 0.29.13 for support Python 3.8. * Some small optimizations. ==== python-qt5 ==== Version update (5.13.0 -> 5.13.1) Subpackages: python-qt5-utils python3-qt5 - Update to 5.13.1. Check the ChangeLog file for the list of changes ==== python-sip ==== Version update (4.19.18 -> 4.19.19) Subpackages: python-sip-common python3-sip - Update to 4.19.19 * Correction to the docs. * Added sipIsOwnedByPython(), sipRegisterExitNotifier() and sipVisitWrappers() to the public API. * Deprecated the -B option to sip. ==== qpdf ==== Version update (9.0.0 -> 9.0.1) - Update to version 9.0.1 * Upstream fixed bsc#1150151, removed explicit -fsigned-chars from CXXFLAGS * See included ChangeLog file for the complete changelog ==== sqlite3 ==== Subpackages: libsqlite3-0 - bsc#1150137, CVE-2019-16168, sqlite3-CVE-2019-16168.patch: Improper validation of qlite_stat1 sz field leads to division by zero. ==== vim ==== Version update (8.1.1741 -> 8.1.2052) Subpackages: gvim vim-data vim-data-common - Updated to version 8.1.2052, fixes the following problems - refreshed patches: disable-unreliable-tests.patch vim-8.0-ttytype-test.patch * Cleared/added match highlighting not updated in other window. (Andi Massimino) * Still some match functions in evalfunc.c. * 'hlsearch' and match highlighting in the wrong place. * Build error without the conceal feature. * Compiler warning for unused argument. * ":dl" is seen as ":dlist" instead of ":delete". * Compiler warning for unused variables. (Tony Mechelynck) * :args output is not aligned. * Coverity warns for using negative index. * Depending on the terminal width :version may miss a line break. * When redrawing popups plines_win() may be called often. * Resizing hashtable is inefficient. * Use of popup window mask is inefficient. * Build failure. * Leaking memory when using a popup window mask. * Autocommand that splits window messes up window layout. * Text added with appendbufline() to another buffer isn't displayed. * Count of g$ not used correctly when text is not wrapped. * No mode char for terminal mapping from maparg(). * Extra line break for wrapping output of :args. * Filetype "vuejs" causes problems for some users. * Some filetype rules are in the wrong place. * Evalfunc.c is still too big. * ":browse oldfiles" is not tested. * get(func, dict, def) does not work properly. * Code for writing session file is spread out. * FEAT_SESSION defined separately. * Man plugin changes setting in current window. * 'shellslash' is also used for completion. * Cannot get the window ID of the popup preview window. * The preview popup window may be too far to the right. * Test is silently skipped. * Error message may be empty in filetype test. * Text added with a job to another buffer isn't displayed. * Useless checks for job feature in channel test. * Not showing the popup window right border is confusing. * Not showing the popup window right border is confusing. * Warning for file no longer available is repeated every time Vim is focused. (Brian Armstrong) * Amiga: no builtin OS readable version info. * Map functionality mixed with character input. * Double click in popup scrollbar starts selection. * Cannot resize a popup window. * missing changes in proto file * Cannot see file name of preview popup window. * :mkvimrc is not tested. * 'completeslash' also applies to globpath(). * The vgetorpeek() function is too long. * Mixed comment style in globals. * Tests are flaky. * No syntax HL after splitting windows with :bufdo. (Yasuhiro Matsumoto) * :argdo is not tested * The vgetorpeek() function is too long. * Warning for unused variable in tiny version. (Tony Mechelynck) * Cannot avoid mapping for a popup window. * Function call functions have too many arguments. * Cannot build without the +eval feature. * Missing change to call_callback(). * All builtin functions are global. * No test for display updating without a scroll region. * Au_did_filetype is declared twice. * Test for display updating doesn't check without statusline. * More functions can be used as a method. * Build failure for tiny version. * More functions can be used as a method. * Popup_getoptions() is missing an entry for "mapping". * Popup window color cannot be set to "Normal". * Reading a truncted undo file hangs Vim. * ATTENTION prompt for a preview popup window. * A long title in a popup window overflows. * Duplicating info for internal functions. * Cannot use a user defined function as a method. * Github contribution text is incomplete. * Unused variable. * :pedit does not work with a popup preview window. * Using expr->FuncRef() does not work. * No test for wrong number of method arguments. * Confusing error message when range is not allowed. * Command line history code is spread out. * Crash when correctly spelled word is very long. (Ben Kraft) * Allocating more memory than needed for extended structs. * Tests use hand coded feature and option checks. * Allocating more memory than needed for extended structs. * Not strict enough checking syntax of method invocation. * Difference in screenshots. * Confusing skipped message. * Win_execute() does not work in other tab. (Rick Howe) * Allocating a bit too much when spellbadword() does not find a bad word. * Cannot use a lambda as a method. * Cannot use printf() as a method. * Inaccurate memory estimate for Amiga-like OS. * Popup test fails if clipboard is supported but not working. * There is :spellwrong and :spellgood but not :spellrare. * Insufficient info when test fails because of screen size. * Testing: WorkingClipboard() is not accurate. * No test for Ex shift commands. * Test listed as flaky should no longer be flaky. * Might be freeing memory that was not allocated. * Buffer no longer unloaded when adding text properties to it. * May use NULL pointer when running out of memory. * Inconsistently using GetVimCommand() and v:progpath. (Daniel Hahler) * Suspend test is failing. * 'langmap' is not used for CTRL-W command in terminal. * Focus may remain in popup window. * Crash when sound_playfile() callback plays sound. * Timers test is flaky. * Timers test is still flaky. * Now another timer test is flaky. * Another failing timer test. * popup preview test fails sometimes. (Christian Brabandt) * Cannot use modifier with multi-byte character. * Test for multi-byte mapping fails on some systems. * Timer test sometimes fails on Mac. * Map timeout test is flaky. * Only some assert functions can be used as a method. * Coverity warns for not using return value. * Confusing error when using a builtin function as method while it does not support that. * Still a timer test that is flaky on Mac. * Spellrare and spellrepall in the wrong order. * Modeless selection in GUI does not work properly. * Still a timer test that is flaky on Mac. * Multibyte characters in 'listchars' don't work correctly if 'linebreak' is also enabled. (Martin Tournoij) * Code for the argument list is spread out. * Using :pedit from a help file sets the preview window to help filetype. (Wang Shidong) * Modeless selection in GUI still not correct. * When Vim exits because of a signal, VimLeave is not triggered. (Daniel Hahler) * Cannot build tiny version. * Modeless selection in popup window overlaps scrollbar. * Cannot get size and position of the popup menu. * proto file missing from distribution * Graduated features scattered. * Negative float before method not parsed correctly. * More functions can be used as methods. * Cannot show extra info for completion in a popup window. * Popup window test fails in some configurations. * Cannot specify properties of the info popup window. * Options test fails. * Cannot use mouse scroll wheel in popup in Insert mode. Mouse clicks in popup close the popup menu. * Comments in libvterm are inconsistent. * Command line expansion code is spread out. * The +cmdline_compl feature is not in the tiny version. * More functions can be used as methods. * Coverity warns for using a NULL pointer. * Ml_get error when deleting fold marker. * Functions used in one file are global. * Missing index entry and option menu for 'completepopup'. * Script to summarize test results can be improved. * Not checking for out-of-memory of autoload_name(). * Using NULL pointer when out of memory. * Compiler warning for unused variable. * May free memory twice when out of memory. * Crash when out of memory during startup. * sign_place() does not work as documented. * Sign test fails in the GUI. * The +insert_expand feature is not always available. * Cannot have an info popup without a border. * Cannot build without the +eval feature. * Cannot have an info popup align with the popup menu. * Cannot set all properties of the info popup. * Info popup size is sometimes incorrect. * Wrong position for info popup with scrollbar on the left. * Every popup window consumes a buffer number. * More functions can be used as methods. * Redrawing too much when toggling 'relativenumber'. * More functions can be used as methods. * More functions can be used as methods. * Not easy to compute the space on the command line. * Command line expansion code is spread out. * More functions can be used as methods. * Trying to allocate negative amount of memory when closing a popup. * Non-current window is not redrawn when moving popup. (Ben Jackson) * Redrawing popups is inefficient. * Using current window option values when passing a buffer to popup_create(). * Cannot close a popup by the X when a filter consumes all events. * More functions can be used as methods. * In diff mode global operations can be very slow. * Some source files are not in a normal encoding. * Using empty string for current buffer is unexpected. * More functions can be used as methods. * Cursorline not redrawn when putting a line above the cursor. * Code for dealing with script files is spread out. * Popup windows don't move with the text when making changes. * No tests for text property popup window. * Cannot recognize .jsx and .tsx files. * Syntax test fails. * Ml_get errors after using append(). (Alex Genco) * The eval.c file is too big. * Not enough tests for text property popup window. * Test for text property popup window is flaky. * Not enough tests for text property popup window. * Errors when using javascriptreact. * May crash when out of memory. * Code for handling v: variables in generic eval file. * Script tests fail. * getftype() test fails on Mac. * Shadow directory gets outdated when files are added. * More code can be moved to evalvars.c. * Leaking memory when using sound callback. * Popup window "firstline" cannot be reset. * Memory error when profiling a function without a script ID. * When executing one test the report doesn't show it. * Mouse doesn't work in Linux console and causes 100% CPU. (James P. Harvey) * Cannot scroll a popup window to the very bottom. * Using NULL pointer after an out-of-memory. * Mouse double click test is a bit flaky. * More functions can be used as a method. * Tests contain typos. * Screenshot tests may use a different encoding. (Dominique Pelle) * More code can be moved to evalvars.c. * Old style comments taking up space. * When using "firstline" in popup window text may jump when redrawing it. (Nick Jensen) * Fold code is spread out. * More functions can be used as a method. * Leaking memory when using tagfunc(). * Popup window filter may be called recursively when using a Normal mode command. (Nick Jensen) * Crash when using nested map() and filter(). * The search count message is not displayed when using a mapping. (Gary Johnson) * Some code in options.c fits better elsewhere. * Line() only works for the current window. * Crash when using nested map(). * Popup window filter is used in all modes. * Search stat space wrong, no test for 8.1.1965. * Manually enabling features causes build errors. (John Marriott) * No proper test for getchar(). * Cannot build without the quickfix feature. * Travis log always shows test output. * Terminal debugger plugin may hang. * The eval.c file is too big. * Code for handling file names is spread out. * Fix for search stat not tested. * The evalfunc.c file is too big. * More functions can be used as methods. * Compiler nags for uninitialized variable and unused function. * More functions can be used as methods. * Code for dealing with paths is spread out. * More functions can be used as methods. * :startinsert! does not work the same way as "A". * The evalfunc.c file is still too big. * Cannot build with eval but without cscope. * Still cannot build with eval but without cscope. * The search stat moves when wrapping at the end of the buffer. * More functions can be used as methods. * No redraw after a popup window filter is invoked. * Redraw even when no popup window filter was invoked. * Calling both PlaySoundW() and PlaySoundA(). * Plugin cannot get the current IME status. * Some source files are too big. * Version number 2000 missing. * More functions can be used as methods. * The regexp.c file is too big. * Build failure with huge features but without channel feature. * No test for what 8.1.1926 fixes. * Error for invalid range when using listener and undo. (Paul Jolly) * Cursorline highlighting not updated in popup window. (Marko Mahni?) * New file uses old style comments. * More functions can be used as methods. * More functions can be used as methods. * More functions can be used as methods. * Terminal altscreen test fails sometimes. * Terminal altscreen test still fails sometimes. * Terminal altscreen test now fails on MS-Windows. * Cannot execute commands after closing the cmdline window. * Using freed memory when out of memory and displaying message. * 'cursorline' always highlights the whole line. * It is not easy to change the window layout. * Some global functions can be local to the file. * The option.c file is too big. * No test for synIDattr() returning "strikethrough". * Delete call commented out for debugging. * Possibly using uninitialized memory. * Options test script does not work. * Cannot control 'cursorline' highlighting well. * Tests fail when build with normal features and terminal. (Dominique Pelle) * Cursor position wrong when resizing and using conceal. * Scrollbar thumb wrong in popup window. * Cannot build with tiny features. * Dark theme of GTK 3 not supported. * Recognizing octal numbers is confusing. * The str2nr() tests fail. * Can call win_gotoid() in cmdline window. * has('vimscript-4') is always 0. * Character from 'showbreak' does not use 'wincolor'. (Nick Jensen) * No highlighting of current line in quickfix window. * No test for diff mode with syntax highlighting. * The evalfunc.c file is too big. * Not sufficient testing for quoted numbers. * No easy way to process postponed work. (Paul Jolly) * The option.c file is too big. * SafeState may be triggered at the wrong moment. * Cannot check the current state. * Not clear why SafeState and SafeStateAgain are not triggered. * Cannot build tiny version. * Popup window test fails in some configurations. (James McCoy) * Double-click test is a bit flaky. * Using "x" before a closed fold may delete that fold. ==== whois ==== Version update (5.5.0 -> 5.5.1) - whois 5.5.1: * Update the .ge TLD server * Update Spanish translations ==== wicked ==== Version update (0.6.55 -> 0.6.57) Subpackages: libwicked-0-6 wicked-service - version 0.6.57 - dhcp6: omit noprefixroute with address-length (bsc#1150972) Permit to assume that the address prefix-length override specified in the config is a valid on-link prefix length, to let the kernel create a route for this prefix. - dhcp6: differentiated mode=auto resolving from RA (bsc#1150183) Fixed to not trigger to report an error when ipv6 RA is not available or the received RA disables dhcp while mode is set to auto, but to deliver a 'deferred' results. - version 0.6.56 - dhcp6: initial support to request prefix for delegations (jsc#SLE-5936) - dhcp6: set the noprefixroute address option (bsc#1132280) ==== wireshark ==== Version update (3.0.3 -> 3.0.5) Subpackages: libwireshark12 libwiretap9 libwscodecs2 libwsutil10 wireshark-ui-qt - wireshark 3.0.5: * Fix Qt interface crashes on a profile with packet list only * NET-SNMP EngineID Length handling Warning * fix Crash SIGSEGV when decrypting IEEE 802.11 EAP re-authentications - wireshark 3.0.4 * CVE-2019-16319: Fixed an infinite loop in the Gryphon dissector (boo#1150690). - Further features, bug fixes and updated protocol support as listed in: https://www.wireshark.org/docs/relnotes/wireshark-3.0.4.html ==== xorg-x11-server ==== Subpackages: xorg-x11-server-extra xorg-x11-server-sdk xorg-x11-server-wayland - reintroduce Xvfb subpackage (boo#1151457) - Add U_xwayland-Separate-DamagePtr-into-separate-window-data.patch and U_xwayland-Allow-passing-a-fd.patch: Needed for gnome 3.34 new and experimental xwayland on demand feature. - Rebase patches with quilt. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed - Review of the weeks 2019/37 - 39
by Dominique Leuenberger / DimStar 27 Sep '19

27 Sep '19

Dear Tumbleweed users and hackers, Due to a holiday on my part I had to skip the last two weekly reviews - which of course doe snot mean Tumbleweed went to sleep, it's just that it was given into the capable hand of Max Lin. I will include all the updates from the last three weeks this time, to get you an overview of what all happened. For this reason, I'll cover 10 snapshots: 0905, 0907, 0908, 0916, 0917, 0918, 0920, 0921, 0923 and 0925 The most noteworthy changes include: * Mozilla Firefox 68.1.0 & 69.0.1 * KDE Plasma 5.16.5 * KDE Frameworks 5.62.0 * KDE Applications 19.08.1 * Qt 5.13.1 * Linux kernel 5.2.14 * Mesa 19.1.7 * LibreOffice 6.3.2.2 * PulseAudio 13.0 * filesystem changes: /etc/cron.* will no longer be generally available. BuildRequire cron in your packages if you install files there (or better yet, migrate to systemd timers) Of course, a lot is still on the backlog and will hopefully find its way into Tumbleweed soon. The main topics in Staging currently are: * glibc 2.30: all issues observed in staging have been resolved, Snapshot 0927 and later should ship it * systemd 243 * Linux kernel 5.3.1 * poppler0.81.0: again breaking texlive * GStreamer 1.16.1 * KDE Plasma 5.17.0: current alphas are staged and being tested * A rework of the way we provide the 'Tumbleweed snapshot' to build against in OBS. Instead of twice copying binaries around inside OBS, we plan on changing the OBS setup to use DoD (Download On-Demand) for openSUSE:Factory/snapshot. For the users/developers, this should not bring any change, no repository reconfiguration is needed. But it helps in largely simplifying the way the sync is done AND it finally stops delete requests / multi-spec package changes to bleed into devel projects building against snapshots. Cheers, Dominique

1 0

[opensuse-factory] Lock grades for zypper
by H.Merijn Brand 27 Sep '19

27 Sep '19

Short question: are there different kinds of locks available for zypper? Here are some of the reasons I see for adding locks with zypper al. 1. I do not want software installed on my system: I personally hate stuff like emacs and zeitgeist, and find installing it is a waste of diskspace, so I blocked them 2. I do not want an installed version to be upgraded/updated I have locked svn to version 1.8.17, as newer versions do not work well with the svn-to-git conversion tools I use(d). As I do not have any active repository in svn and just use it to import old svn repo's and then convert them to git, I have locked svn at that version 3. I do not want some software to be removed I still use opera-12 (next to opera-developer), so every update scheme would (and should) remove opera-12 and replace it with something more modern. Every sane user should want that, but I have specific purposes for this browser so I locked it 4. I don't want manually added rpm's to be replaced with rep rpm's Being forced to work with Oracle, I have a specific set of versioned oracle software that is possibly also available on public (system) repositories. Due to dependencies (probably to be compliant to customer demands) I want to keep these and no other version of it 5. Stuff I build from source Being involved with (many) open source projects, I have blocked git from installing from the repositories, as I build every version from the sources myself. Having it overwritten by updates from zypper would seriously harm my testing procedures 6. Stuff that would conflict with stuff I build from source Say I build and maintain "fooble" (which might not be publicly available), I might need to block the bimble34 packages that installs any part of fooble and invalidates it 7. Old versions of software needed for off-repo rpm's There are packages that (rightfully) would be deleted using zypper dup, but that are needed for older software that is still needed on that machine and is built from source. Zypper dup would e.g. uninstall libfooble-1 as none of the packages requires it and libfooble-4 is now current. I want to keep libfooble-1 and libfooble-1-devel available to be able to build my old stuff So, there are different reasons for locking and IMHO there should be different levels of it a. Lock to prevent installation b. Lock to update/upgrade c. Lock to downgrade d. Lock to prevent removal e. Lock to prevent removal but upgrade/downgrade is allowed f. Lock to prevent installation/removal from repo's but make zypper aware that it is installed anyway and ignore further dependencies on this product (like the above git example) On my laptop I now have 59 locks, and on my workstations 51 and 41 Opinions? -- H.Merijn Brand http://tux.nl Perl Monger http://amsterdam.pm.org/ using perl5.00307 .. 5.31 porting perl5 on HP-UX, AIX, and Linux https://useplaintext.email https://tux.nl http://www.test-smoke.org http://qa.perl.org http://www.goldmark.org/jeff/stupid-disclaimers/

8 18

[opensuse-factory] MozillaThunderbird is missing Italian Language Pack
by Marco Calistri 26 Sep '19

26 Sep '19

Hello, Please be advised that MozillaThunderbird-68.1.0-1.1.x86_64 is missing (or at least it doesn't appear in the Language scrolling menu) the Italian Language Pack, so that is not possible to set the interface to this idiom. I also tried installing MozillaFirefox-translations-other beside MozillaFirefox-translations-common, which was already installed. Thanks and regards, -- Marco Calistri Build: openSUSE Tumbleweed 20190921 Kernel: 5.2.14-1-default - Cinnamon 3.8.9 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] YaST Sprint 85 Report
by Martin Vidner 26 Sep '19

26 Sep '19

- Encryption got so many improvements that we are writing a separate post (stay tuned). - Refactored Network on its way to Tumbleweed. - When you fix a corner case, automatic tests will break in a different corner. - Not only in flight simulators but also in storage device graphs it matters which way is up and which is down. https://lizards.opensuse.org/2019/09/26/highlights-of-yast-development-spri… -- Martin Vidner, YaST Team http://en.opensuse.org/User:Mvidner

1 0

[opensuse-factory] New Tumbleweed snapshot 20190923 released!
by Dominique Leuenberger 26 Sep '19

26 Sep '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: attica-qt5 (5.61.0 -> 5.62.0) baloo5 (5.61.0 -> 5.62.0) binutils bluez-qt (5.61.0 -> 5.62.0) breeze5-icons (5.61.0 -> 5.62.0) ceph (14.2.2.354+g8878cf2360 -> 14.2.4.352+g2060e25d1c) drbd drbd-utils expat (2.2.7 -> 2.2.8) fcitx-qt5 frameworkintegration (5.61.0 -> 5.62.0) gcc9 (9.2.1+r274709 -> 9.2.1+r275327) grub2 kactivities-stats (5.61.0 -> 5.62.0) kactivities5 (5.61.0 -> 5.62.0) karchive (5.61.0 -> 5.62.0) kauth (5.61.0 -> 5.62.0) kbookmarks (5.61.0 -> 5.62.0) kcmutils (5.61.0 -> 5.62.0) kcodecs (5.61.0 -> 5.62.0) kcompletion (5.61.0 -> 5.62.0) kconfig (5.61.0 -> 5.62.0) kconfigwidgets (5.61.0 -> 5.62.0) kcoreaddons (5.61.0 -> 5.62.0) kcrash (5.61.0 -> 5.62.0) kdbusaddons (5.61.0 -> 5.62.0) kdeclarative (5.61.0 -> 5.62.0) kded (5.61.0 -> 5.62.0) kdelibs4support (5.61.0 -> 5.62.0) kdesu (5.61.0 -> 5.62.0) kdnssd-framework (5.61.0 -> 5.62.0) kdoctools (5.61.0 -> 5.62.0) kemoticons (5.61.0 -> 5.62.0) kfilemetadata5 (5.61.0 -> 5.62.0) kglobalaccel (5.61.0 -> 5.62.0) kguiaddons (5.61.0 -> 5.62.0) kholidays (5.61.0 -> 5.62.0) khtml (5.61.0 -> 5.62.0) ki18n (5.61.0 -> 5.62.0) kiconthemes (5.61.0 -> 5.62.0) kidletime (5.61.0 -> 5.62.0) kimageformats (5.61.0 -> 5.62.0) kinit (5.61.0 -> 5.62.0) kio (5.61.0 -> 5.62.1) kirigami2 (5.61.0 -> 5.62.0) kitemmodels (5.61.0 -> 5.62.0) kitemviews (5.61.0 -> 5.62.0) kjobwidgets (5.61.0 -> 5.62.0) kjs (5.61.0 -> 5.62.0) kjsembed (5.61.0 -> 5.62.0) knewstuff (5.61.0 -> 5.62.0) knotifications (5.61.0 -> 5.62.0) knotifyconfig (5.61.0 -> 5.62.0) kpackage (5.61.0 -> 5.62.0) kparts (5.61.0 -> 5.62.0) kpeople5 (5.61.0 -> 5.62.0) kplotting (5.61.0 -> 5.62.0) kpty (5.61.0 -> 5.62.0) kross (5.61.0 -> 5.62.0) krunner (5.61.0 -> 5.62.0) kservice (5.61.0 -> 5.62.0) ktexteditor (5.61.0 -> 5.62.0) ktextwidgets (5.61.0 -> 5.62.0) kunitconversion (5.61.0 -> 5.62.0) kwallet (5.61.0 -> 5.62.0) kwayland (5.61.0 -> 5.62.0) kwidgetsaddons (5.61.0 -> 5.62.0) kwindowsystem (5.61.0 -> 5.62.0) kxmlgui (5.61.0 -> 5.62.0) kxmlrpcclient5 (5.61.0 -> 5.62.0) latex2html (2018 -> 2019.2) libKF5ModemManagerQt (5.61.0 -> 5.62.0) libKF5NetworkManagerQt (5.61.0 -> 5.62.0) libblockdev libqt5-qtmultimedia libstorage-ng (4.2.2 -> 4.2.11) libyui (3.6.0 -> 3.8.0) libyui-ncurses (2.52.0 -> 2.52.1) libyui-ncurses-pkg (2.49.0 -> 2.49.1) libyui-qt (2.50.5 -> 2.51.0) libyui-qt-graph (2.45.2 -> 2.45.3) libyui-qt-pkg (2.46.6 -> 2.46.7) lvm2 (2.02.180 -> 2.03.05) lvm2-device-mapper (1.02.149 -> 1.02.163) openssl-1_0_0 oxygen5-icon-theme (5.61.0 -> 5.62.0) patterns-base perl-AnyEvent (7.16 -> 7.17) perl-DateTime-TimeZone (2.36 -> 2.37) perl-Pango (1.226 -> 1.227) phonon4qt5 plasma-framework (5.61.0 -> 5.62.0) prison-qt5 (5.61.0 -> 5.62.0) purpose (5.61.0 -> 5.62.0) python-Twisted (19.2.1 -> 19.7.0) python-configparser (3.7.4 -> 4.0.2) python-cssselect (1.0.3 -> 1.1.0) python-h2 (3.1.0 -> 3.1.1) python-jedi python-lxml (4.4.0 -> 4.4.1) python-numpy python-pexpect python-psutil (5.6.1 -> 5.6.3) python-pyasn1 (0.4.5 -> 0.4.7) python-pyasn1-modules (0.2.5 -> 0.2.6) python-pycryptodome (3.8.2 -> 3.9.0) python-pytz python-pyxdg python-setuptools python-urllib3 python2-numpy qqc2-desktop-style (5.61.0 -> 5.62.0) re2 (20190801 -> 20190901) rsibreak (0.12.10 -> 0.12.11) rubygem-yast-rake (0.2.34 -> 0.2.36) solid (5.61.0 -> 5.62.0) sonnet (5.61.0 -> 5.62.0) syndication (5.61.0 -> 5.62.0) syntax-highlighting (5.61.0 -> 5.62.0) threadweaver (5.61.0 -> 5.62.0) timezone (2019b -> 2019c) timezone-java (2019b -> 2019c) transactional-update (2.15 -> 2.16) yast2 (4.2.19 -> 4.2.23) yast2-control-center (4.2.1 -> 4.2.2) yast2-country (4.2.4 -> 4.2.5) yast2-dns-server (4.2.2 -> 4.2.4) yast2-installation (4.2.12 -> 4.2.14) yast2-network (4.2.11 -> 4.2.12) yast2-packager (4.2.24 -> 4.2.27) yast2-schema (4.2.2 -> 4.2.3) yast2-security (4.2.1 -> 4.2.2) yast2-services-manager (4.2.4 -> 4.2.5) yast2-storage-ng (4.2.35 -> 4.2.40) yast2-trans (84.87.20190901.3784ecca69 -> 84.87.20190922.d5dcfb03ab) yast2-ycp-ui-bindings (4.1.0 -> 4.2.1) === Details === ==== attica-qt5 ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Attica5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Fix the attica pkgconfig file. - Drop 0001-Fix-the-attica-pkgconfig-file.patch, merged upstream. ==== baloo5 ==== Version update (5.61.0 -> 5.62.0) Subpackages: baloo5-file baloo5-file-lang baloo5-imports baloo5-imports-lang baloo5-kioslaves baloo5-kioslaves-lang baloo5-tools baloo5-tools-lang libKF5Baloo5 libKF5BalooEngine5 libKF5BalooEngine5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Fixes a crash in Peruse triggered by baloo * Fix section hierachy in distributing.md * Remove unused includes * [kded/baloosearchmodule] Remove useless qDebug messages ==== binutils ==== Subpackages: binutils-devel - Update to current 2.32 branch @7b468db3 adding binutils-2.32-branch.diff.gz [jsc#ECO-368]. - Includes fixes for these CVEs: bsc#1109412 aka CVE-2018-17358 aka PR23686 bsc#1109413 aka CVE-2018-17359 aka PR23686 bsc#1109414 aka CVE-2018-17360 aka PR23685 bsc#1111996 aka CVE-2018-18309 aka PR23770 bsc#1112534 aka CVE-2018-18484 aka GCC PR87636 bsc#1112535 aka CVE-2018-18483 aka PR23767 bsc#1113247 aka CVE-2018-18607 aka PR23805 bsc#1113252 aka CVE-2018-18606 aka PR23806 bsc#1113255 aka CVE-2018-18605 aka PR23804 bsc#1116827 aka CVE-2018-17985 aka GCC PR87335 bsc#1118830 aka CVE-2018-19932 aka PR23932 bsc#1118831 aka CVE-2018-19931 aka PR23942 bsc#1120640 aka CVE-2018-1000876 aka PR23994 bsc#1121034 aka CVE-2018-20651 aka PR24041 bsc#1121035 aka CVE-2018-20623 aka PR24049 bsc#1121056 aka CVE-2018-20671 aka PR24005 bsc#1142772 aka CVE-2019-1010180 aka PR23657 - Refresh s390-biarch.diff and binutils-revert-plt32-in-branches.diff . - For the SLE12 package this also removes patches binutils-z13-1.diff, binutils-z13-2.diff, binutils-z13-3.diff, binutils-z13-4.diff and binutils-z13-5.diff . - enable xtensa architecture (Tensilica lc6 and related) - Fix SUSE typo in README package name ==== bluez-qt ==== Version update (5.61.0 -> 5.62.0) Subpackages: bluez-qt-imports bluez-qt-udev libKF5BluezQt6 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes ==== breeze5-icons ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Fix *-loading-symbolic icon symlinks * Add new activities and virtual desktops icons * Make small recent documents icons look like documents and improve clock emblems * Create new "Recent folders" icon (kde#411635) * Add "preferences-desktop-navigation" icon (kde#402910) * Add 22px dialog-scripts, change script actions/places icons to match it * Improve "user-trash" icon * Use empty/filled style for monochrome empty/full trash * Make notification icons use outline style * Make user-trash icons look like trashcans * Add breeze icons for ROOT cern files * Remove applets/22/computer (kde#410854) * Add view-barcode-qr icons * Krita has split from Calligra and now uses Krita name instead of calligrakrita * Add battery-ups icons * Make "monitor" a link to "computer" icon * Add FictionBook 2 icons * Add icon for kuiviewer, needs updating -> bug 407527 * Symlink "port" to "anchor", which displays more appropriate iconography * Change radio to device icon, add more sizes * Make `pin` icon point to an icon that looks like a pin, not something unrelated * Fix missing digit and pixel-perfect alignment of depth action icons (kde#406502) * Make 16px folder-activites look more like larger sizes * add icon for clazy, should be remade in svg * add latte-dock icon from latte dock repo for kde.org/applications * icon for kdesrc-build used by kde.org/applications to be redrawn. * Rename media-show-active-track-amarok to media-track-show-active ==== ceph ==== Version update (14.2.2.354+g8878cf2360 -> 14.2.4.352+g2060e25d1c) Subpackages: librados2 librbd1 - Update to 14.2.4-352-g2060e25d1c: + rebase on top of upstream Nautilus v14.2.4 release, SHA1 75f4de193b3ea58512f204623e6c5a16e6c1e1ba for details, see https://ceph.io/releases/v14-2-4-nautilus-released/ - Update to 14.2.3-349-g7b1552ea82: + rebase on top of upstream Nautilus v14.2.3 release, SHA1 0f776cf838a1ae3130b2b73dc26be9c95c6ccc39 for details, see https://ceph.io/releases/v14-2-3-nautilus-released/ * ceph-volume: prints errors to stdout with --format json (bsc#1132767) * mgr/dashboard: Changing rgw-api-host does not get effective without disable/enable dashboard mgr module (bsc#1137503) * mgr/dashboard: Silence Alertmanager alerts (bsc#1141174) * mgr/dashboard: Fix e2e failures caused by webdriver version (bsc#1145759) + librbd: always try to acquire exclusive lock when removing image (bsc#1149093) ==== drbd ==== Subpackages: drbd-kmp-default - bsc#1151579, fix collinelle default path and always trigger in obs Add patch suse-coccinelle.patch - bsc#1146117, disallow dual primaries when not configured. Modify patch rely-on-sb-handles.patch ==== drbd-utils ==== - bsc#1145296, fix the wrong return code with cib_apply_diff Add patch cibadmin-return-code-convert.patch ==== expat ==== Version update (2.2.7 -> 2.2.8) Subpackages: libexpat-devel libexpat1 libexpat1-32bit - Version update to 2.2.8 * Security fixes: (CVE-2019-15903, bsc#1149429) - CVE-2019-15903 -- Fix heap overflow triggered by XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber), and deny internal entities closing the doctype; * Bug fixes: - Fix cases where XML_StopParser did not have any effect when called from inside of an end element handler - xmlwf: Fix exit code for operation without "-d DIRECTORY"; previously, only "-d DIRECTORY" would give you a proper exit code: Now both cases return exit code 2. * Other changes: - examples: Improve elements.c - Autotools: Add argument --enable-xml-attr-info - Autotools: Add arguments --with-getrandom --without-getrandom --with-sys-getrandom --without-sys-getrandom - Autotools: Fix linking issues with "./configure LD=clang" - Autotools: Fix "make run-xmltest" for out-of-source builds - CMake: Pull all options from Expat <=2.2.7 into namespace - CMake: Add argument -DEXPAT_ATTR_INFO=(ON|OFF), default OFF - CMake: Add argument -DEXPAT_LARGE_SIZE=(ON|OFF), default OFF - CMake: Add argument -DEXPAT_MIN_SIZE=(ON|OFF), default OFF - CMake: Add arguments -DEXPAT_WITH_GETRANDOM=(ON|OFF|AUTO), default AUTO - CMake: Add arguments -DEXPAT_WITH_SYS_GETRANDOM=(ON|OFF|AUTO), default AUTO - CMake: Install expat_config.h to include directory - CMake: Generate and install configuration files for future find_package(expat [..] CONFIG [..]) - CMake: Now produces a summary of applied configuration - CMake: Require C++ compiler only when tests are enabled - CMake: Fix compilation for 16bit character types, i.e. ex -DXML_UNICODE=ON (and ex -DXML_UNICODE_WCHAR_T=ON) - CMake: Port "make run-xmltest" from GNU Autotools to CMake - CMake: Integrate OSS-Fuzz fuzzers, option -DEXPAT_BUILD_FUZZERS=(ON|OFF), default OFF - Removed patches fixed in the update: * expat-CVE-2019-15903.patch * expat-CVE-2019-15903-tests.patch - Security fix (CVE-2019-15903, bsc#1149429) * Crafted XML input results in heap-based buffer over-read by fooling the parser into changing from DTD parsing to document parsing * Added patches: - expat-CVE-2019-15903.patch - expat-CVE-2019-15903-tests.patch ==== fcitx-qt5 ==== - Add upstream patch fix-remove-paths-warnings.patch - Change COPYING from %doc to %license ==== frameworkintegration ==== Version update (5.61.0 -> 5.62.0) Subpackages: frameworkintegration-plugin libKF5Style5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== gcc9 ==== Version update (9.2.1+r274709 -> 9.2.1+r275327) Subpackages: cpp9 gcc9-c++ gcc9-fortran gcc9-info gcc9-locale gcc9-objc libasan5 libatomic1 libgcc_s1 libgcc_s1-32bit libgfortran5 libgomp1 libitm1 liblsan0 libobjc4 libquadmath0 libstdc++6 libstdc++6-32bit libstdc++6-devel-gcc9 libstdc++6-locale libstdc++6-pp-gcc9 libstdc++6-pp-gcc9-32bit libtsan0 libubsan1 - Add gcc9-pr91772.patch and gcc9-pr91763.patch to fix fallout of gcc9-autodetect-g-at-lto-link.patch. - Add gcc9-autodetect-g-at-lto-link.patch. [bsc#1149995] - Reorder things in cross.spec.in so the Version define comes before the first use of %version. - Revert removal of defattr, it breaks building on SLES12. - Update to gcc-9-branch head (r275327). * Pulls fix for POWER9 DARN miscompilation. (bsc#1149145, CVE-2019-15847) - Rework shared spec file parts to allow custom Summary and Description for cross compilers. Clarify their Summary and Description. [bsc#1148517] - Replace old $RPM_* shell vars by macros (where possible). - Drop defattr and BuildRoot. ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - Fix fallback embed doesn't work when no post mbr gap at all (boo#1142229) * Refresh grub2-setup-try-fs-embed-if-mbr-gap-too-small.patch ==== kactivities-stats ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Add Term::Type::files() and Term::Type::directories() to filter only directories or excluding them * Add @since 5.62 for newly added setters * Add proper logging using ECMQtDeclareLoggingCategory * Add setter to Type, Activity, Agent and UrlFilter query fields * Use special values constants in terms.cpp * Allow date range filtering of resource events using Date Term ==== kactivities5 ==== Version update (5.61.0 -> 5.62.0) Subpackages: kactivities5-imports libKF5Activities5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * [kactivities] Use new activities icon * Remove unused includes ==== karchive ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Fix creating archives on Android content: URLs ==== kauth ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Auth5 libKF5Auth5-lang libKF5AuthCore5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kbookmarks ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Bookmarks5 libKF5Bookmarks5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kcmutils ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5KCMUtils5 libKF5KCMUtils5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kcodecs ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Codecs5 libKF5Codecs5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 ==== kcompletion ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Completion5 libKF5Completion5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kconfig ==== Version update (5.61.0 -> 5.62.0) Subpackages: kconf_update5 libKF5ConfigCore5 libKF5ConfigCore5-lang libKF5ConfigGui5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Fix memory leak in KConfigWatcher * Add a logging category for logs warnings * Disable KCONFIG_USE_DBUS on Android ==== kconfigwidgets ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5ConfigWidgets5 libKF5ConfigWidgets5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Use isEmpty here too * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) * [KColorSchemeManager] Optimize preview generation * Fix includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kcoreaddons ==== Version update (5.61.0 -> 5.62.0) Subpackages: kcoreaddons-lang libKF5CoreAddons5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * autotests: split up kprocesstest to fix compilation with Qt 5.14 * Use QLatin1String here * Q_UNUSED doesn't need a ; after it. * [KProcessList] Split command line and process name ==== kcrash ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Avoid enabling kcrash if it's only included via a plugin (kde#401637) * Disable kcrash when running under rr * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kdbusaddons ==== Version update (5.61.0 -> 5.62.0) Subpackages: kdbusaddons-tools libKF5DBusAddons5 libKF5DBusAddons5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes * make deadservicetest unix exclusive * remove useless moc include * fix race on kcrash auto-restarts ==== kdeclarative ==== Version update (5.61.0 -> 5.62.0) Subpackages: kdeclarative-components libKF5CalendarEvents5 libKF5Declarative5 libKF5Declarative5-lang libKF5QuickAddons5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Warn if KPackage is invalid * Remove unused includes * [GridDelegate] Don't select unselected item when clicking on any of its action buttons (kde#404536) * [ColorButton] Forward accepted signal from ColorDialog * use zero-based coordinate system on the plot - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kded ==== Version update (5.61.0 -> 5.62.0) Subpackages: kded-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kdelibs4support ==== Version update (5.61.0 -> 5.62.0) Subpackages: kdelibs4support-lang libKF5KDELibs4Support5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * kdelibs4support: port away from deprecated KWindowSystem API - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kdesu ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Su5 libKF5Su5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kdnssd-framework ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5DNSSD5 libKF5DNSSD5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 ==== kdoctools ==== Version update (5.61.0 -> 5.62.0) Subpackages: kdoctools-lang libKF5DocTools5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * KF5DocToolsMacros.cmake: Use non-deprecated KDEInstallDirs variables (kde#410998) * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kemoticons ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kfilemetadata5 ==== Version update (5.61.0 -> 5.62.0) Subpackages: kfilemetadata5-lang - Drop Qt5Multimedia BuildRequires, not used since KF 5.41. - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Implement writing of images - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kglobalaccel ==== Version update (5.61.0 -> 5.62.0) Subpackages: kglobalaccel5 libKF5GlobalAccel5 libKF5GlobalAccel5-lang libKF5GlobalAccelPrivate5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kguiaddons ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 ==== kholidays ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Holidays5 libKF5Holidays5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Display filename where we return an error * Remove unused includes * Include ECMGeneratePriFile after KDEInstallDirs - Replace pkgconfig(Qt5Foo) with cmake(Qt5Foo) in build requirements ==== khtml ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5KHtml5 libKF5KHtml5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== ki18n ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5I18n5 libKF5I18n5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Fix test failing * Localize long number strings (kde#409077) * Support passing target to ki18n_wrap_ui macro ==== kiconthemes ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5IconThemes5 libKF5IconThemes5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Properly turn real into integer * Remove unused includes * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kidletime ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes ==== kimageformats ==== Version update (5.61.0 -> 5.62.0) Subpackages: kimageformats-eps - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Fix uninitialized memory read ==== kinit ==== Version update (5.61.0 -> 5.62.0) Subpackages: kinit-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kio ==== Version update (5.61.0 -> 5.62.1) Subpackages: kio-core kio-lang - Update to 5.62.1 * Fixed interaction with DOS/Windows executables in KRun::runUrl - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * [CopyJob] Use resolved URL in copyingDone so undo can rename back using local file (kde#391606) * FileUndoManager: improve debugging facilities * kio_trash: split up copyOrMove, for a better error than "should never happen" * FileUndoManager: clearer assert when forgetting to record * Fix exit and crash in kio_file when put() fails in readData. * autotests: use QVERIFY2 to print the job error if exec() fails * [CopyJob] Fix crash when copying an already existing dir and pressing "Skip" (kde#408350) * [KUrlNavigator] Add MIME types supported by krarc to isCompressedPath (kde#386448) * Added dialog to set execute permission for executable file when trying to run it. * [KPropertiesDialog] Always check mount point being null (kde#411517) * [KRun] Check mime type for isExecutableFile first * Add an icon for the trash root and a proper label * Add support for handling QNAM SSL errors to KSslErrorUiData * Making FileJob behave consistently. * assert slave command finality * [KFilePlacesView] Use asynchronous KIO::FileSystemFreeSpaceJob * rename internal 'kioslave' helper executable to 'kioslave5' (kde#386859) * [KDirOperator] Middle-elide labels that are too long to fit * [KDirOperator] Add follow new directories options * KDirOperator: Only enable "Create New" menu if the selected item is a directory * KIO FTP: Fix file copy hanging when copying to existing file * KIO: port to non-deprecated KWindowSystem::setMainWindow * KRun: fix runtime warning when widget is null * KRun: remove KProcessRunner dependency on QtWidgets * Port KIO::Job documentation to Qt5-style connect syntax * Make file bookmark names consistent * Remove unused includes * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) * [KDirOperator] Use more human-readable sort order descriptions * Fix build by removing obsolete qrc file for newly-removed images * [Permissions editor] Port icons to use QIcon::fromTheme() (kde#407662) - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kirigami2 ==== Version update (5.61.0 -> 5.62.0) Subpackages: kirigami2-lang libKF5Kirigami2-5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Replace the custom overflow button with PrivateActionToolButton in ActionToolBar * If a submenu action has an icon set, make sure to also display it * [Separator] Match Breeze borders' color * Add Kirigami ListSectionHeader component * Fix context menu button for pages not showing up * Fix PrivateActionToolButton with menu not clearing checked state properly * Use QLatin1String + QString::remove operates on the same object, no need to reassign * Fix supported OS attributes for api.kde.org * remove references from the icon qrc to missing icons. * allow to set custom icon for the left drawer handle * Rework the visibleActions logic in SwipeListItem * Allow usage of QQC2 actions on Kirigami components and now make K.Action based on QQC2.Action * bump import * Add handle icons * Kirigami.Icon: Fix loading bigger images when source is a URL (kde#407409) * Add icon used by Kirigami.AboutPage ==== kitemmodels ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Add @since to properties * Add Q_PROPERTIES interface to KDescendantsProxyModel * Port away from deprecated methods in Qt * Port away from deprecated method QModelIndex::child() * Remove unused includes ==== kitemviews ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5ItemViews5 libKF5ItemViews5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) ==== kjobwidgets ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5JobWidgets5 libKF5JobWidgets5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kjs ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5JS5 libKF5JSApi5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kjsembed ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5JsEmbed5 libKF5JsEmbed5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== knewstuff ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5NewStuff5 libKF5NewStuff5-lang libKF5NewStuffCore5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes * use local variable so it does not need ECM installed - Replace foo-devel with cmake(KF5Foo) in build requirements ==== knotifications ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Notifications5 libKF5Notifications5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove duplicate description and URL from canberra's feature properties * Fix build on the CI * Resolve whether there's dbus before processing src/ * avoid duplicate notifications from showing up on Windows and remove whitespaces * have 1024x1024 app icon as fallback icon in Snore * add `-pid` parameter to Snore backend calls * Remove unused DBus XML file * Remove double check for DBus * add snoretoast backend for KNotifications on Windows * Add QVector include * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== knotifyconfig ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5NotifyConfig5 libKF5NotifyConfig5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kpackage ==== Version update (5.61.0 -> 5.62.0) Subpackages: kpackage-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kparts ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Parts5 libKF5Parts5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kpeople5 ==== Version update (5.61.0 -> 5.62.0) Subpackages: kpeople5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Make it possible to delete contacts from backends * Make it possible to modify contacts * Replace by isEmpty() * Include KDE* cmake macros first - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kplotting ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kpty ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Pty5 libKF5Pty5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kross ==== Version update (5.61.0 -> 5.62.0) Subpackages: kross-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace foo-devel with cmake(KF5Foo) in build requirements ==== krunner ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Make sure we're checking whether tearing down is due after finishing a job * Port runnertest to QGuiApplication * Fix runnertest exiting early * Add a done signal to FindMatchesJob instead of using QObjectDecorator wrongly * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kservice ==== Version update (5.61.0 -> 5.62.0) Subpackages: kservice-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * autotests: check that mimetypes defined by kcoreaddons are available * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== ktexteditor ==== Version update (5.61.0 -> 5.62.0) Subpackages: ktexteditor-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Allow to customize attributes for KSyntaxHighligting themes * More port away from Qt's foreach all loops over method-local containers * Port away from Qt's foreach all loops over rvalue container objects * Port away from Qt's foreach all loops over method-local containers * Fix for all themes: allow turn off attributes in XML highlighting files * play in unit test with better searchText implementation * fix build when using Qt 5.11 * simplify isAcceptableInput + allow all stuff for input methods * simplify typeChars, no need for return code without filtering * Mimic QInputControl::isAcceptableInput() when filtering typed characters (kde#396764) * try to sanitize line endings on paste (kde#410951) * Fix: allow turn off attributes in XML highlighting files * improve word completion to use highlighting to detect word boundaries (kde#360340) * More porting from QRegExp to QRegularExpression * properly check if diff command can be started for swap file diffing (kde#389639) * KTextEditor: Fix left border flicker when switching between documents * Migrate some more QRegExps to QRegularExpression * Add .clangd to .gitignore list * fix vi mode unit test * Allow 0 in line ranges in vim mode. * Use CMake find_dependency instead of find_package in CMake config file template. - Replace foo-devel with cmake(KF5Foo) in build requirements ==== ktextwidgets ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5TextWidgets5 libKF5TextWidgets5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kunitconversion ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5UnitConversion5 libKF5UnitConversion5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Add decibel power units (dBW and multiples) - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kwallet ==== Version update (5.61.0 -> 5.62.0) Subpackages: kwallet-tools kwallet-tools-lang kwalletd5 kwalletd5-lang libKF5Wallet5 libkwalletbackend5-5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Port to non-deprecated KWindowSystem::setMainWindow overload * Remove unused includes * KWallet: fix starting kwalletmanager, the desktop file name has a '5' in it - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kwayland ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * [server] Wrap proxyRemoveSurface in smart pointer * [server] Use cached current mode more and assert validness * [server] Cache current mode * Implement zwp_linux_dmabuf_v1 ==== kwidgetsaddons ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5WidgetsAddons5 libKF5WidgetsAddons5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * [KMessageWidget] Pass widget to standardIcon() * Remove unused includes * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) ==== kwindowsystem ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5WindowSystem5 libKF5WindowSystem5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * KWindowSystem: add cmake option KWINDOWSYSTEM_NO_WIDGETS * Deprecate slideWindow(QWidget *widget) * KWindowSystem: fix compilation with KWINDOWSYSTEM_NO_DEPRECATED * Add KWindowSystem::setMainWindow(QWindow *) overload * KWindowSystem: add setNewStartupId(QWindow *...) overload * KWindowSystem: remove unused QWidget includes * KWindowSystem: port from QApplication to QCoreApplication ==== kxmlgui ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5XmlGui5 libKF5XmlGui5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) - Replace foo-devel with cmake(KF5Foo) in build requirements ==== kxmlrpcclient5 ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5XmlRpcClient5 libKF5XmlRpcClient5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Include ECMGeneratePriFile after KDEInstallDirs * Remove unused includes - Replace foo-devel with cmake(KF5Foo) in build requirements ==== latex2html ==== Version update (2018 -> 2019.2) - version update to 2019.2 * format author block consistently https://bugs.debian.org/223565 * simplify build of manual https://bugs.debian.org/639708 * convert -- to – and --- to — If you want "--", use "-{}-", even inside \texttt{} Behavior of \textt{--} in latex depends on font encoding. https://bugs.debian.org/75416 * fix unicode in -html_version 5.0,math * fix -notop_navigation (had no effect) * remove obsolete "table" option https://bugs.debian.org/276037 * fix "make test" * ppmtopng syntax works with all versions of ppmtopng * respect ./configure --with-perl=/bin/perl * fallback for unknown column types, such as those introduced by \newcolumntype. https://bugs.debian.org/899306 * fix \sffamily https://bugs.debian.org/111441 * produce svg images using pdftocairo * use latex preview package to produce cropped images.pdf * pdflatex by default * dvipng by default * html 5 * unicode input and output by default * Support for packages luainputenc and polyglossia * Support for picture generation via pdflatex, lualatex or dvilualatex (options -use_pdftex, -use_luatex, * use_luadvi correspondingly) * perl 5.26: unescaped brace * polski.perl: no translation until \prefixing command - use native `make test` - use latex2html.1 from tarball - deleted patches - latex2html-perl526.patch (upstreamed) - deleted sources - latex2html-README.SUSE (not needed) - local.pm (not needed) - testfile.tex (not needed) - added required texlive-preview ==== libKF5ModemManagerQt ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes ==== libKF5NetworkManagerQt ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Rename WirelessDevice::lastRequestScanTime to WirelessDevice::lastRequestScan * Add property lastScanTime and lastRequestTime to WirelessDevice * Remove unused includes * ActiveConnection: connect stateChanged() signal to correct interface ==== libblockdev ==== Subpackages: libbd_btrfs2 libbd_crypto2 libbd_fs2 libbd_loop2 libbd_mdraid2 libbd_part2 libbd_swap2 libbd_utils2 libblockdev2 - lvm2-clvm doesn't exist in lvm2-2.03, so change SPEC file libbd_lvm-dbus requires from lvm2-clvm to lvm2 ==== libqt5-qtmultimedia ==== - Spec file cleanup - remove GStreamer 0.10 support - remove defattr, use license ==== libstorage-ng ==== Version update (4.2.2 -> 4.2.11) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - Translated using Weblate (Catalan) (bsc#1149754) - 4.2.11 - merge gh#openSUSE/libstorage-ng#671 - added integration test - 4.2.10 - merge gh#openSUSE/libstorage-ng#670 - added notes - 4.2.9 - merge gh#openSUSE/libstorage-ng#668 - removed unneeded code - cleanup integration tests - code cleanup - 4.2.8 - Translated using Weblate (Japanese) - 4.2.7 - Translated using Weblate (Slovak) - 4.2.6 - Translated using Weblate (Portuguese (Brazil)) - Translated using Weblate (Dutch) - Translated using Weblate (Czech) - merge gh#openSUSE/libstorage-ng#667 - update pot and po files - 4.2.5 - merge gh#openSUSE/libstorage-ng#666 - added note - use dev_t to save major and minor numbers - improved unit test - coding style - consistent function name - added support for plain encryption (bsc#1088641) - added unit test - added integration tests - 4.2.4 - merge gh#openSUSE/libstorage-ng#665 - extended documentation - 4.2.3 ==== libyui ==== Version update (3.6.0 -> 3.8.0) - Added ItemSelector widget (bsc#1084674) - 3.8.0 - Allow to get and set scrollbar position of RichText widget (bsc#1150498) - 3.7.0 ==== libyui-ncurses ==== Version update (2.52.0 -> 2.52.1) - handle new libyui feature dealing with scrollbar position of RichText widget (bsc#1150498) - 2.50.1 ==== libyui-ncurses-pkg ==== Version update (2.49.0 -> 2.49.1) - Added a new generic dependency to force upgrade from all previous versions (e.g. from libyui-ncurses-pkg9 to libyui-ncurses-pkg10) (bsc#1148622) - 2.49.1 ==== libyui-qt ==== Version update (2.50.5 -> 2.51.0) - Implemented ItemSelector widget (bsc#1084674) - 2.50.7 - handle new libyui feature dealing with scrollbar position of RichText widget (bsc#1150498) - 2.50.6 ==== libyui-qt-graph ==== Version update (2.45.2 -> 2.45.3) - Make scroll-up mean zoom-in (bsc#1149158) - 2.45.3 ==== libyui-qt-pkg ==== Version update (2.46.6 -> 2.46.7) - Added a new generic dependency to force upgrade from all previous versions (e.g. from libyui-qt-pkg9 to libyui-qt-pkg10) (bsc#1148622) - 2.46.7 ==== lvm2 ==== Version update (2.02.180 -> 2.03.05) - Update lvm2.spec: make baselibs.conf to a common source. - Avoid creation of mixed-blocksize PV on LVM volume groups (bsc#1149408) + bug-1149408_Fix-rounding-writes-up-to-sector-size.patch + bug-1149408_vgcreate-vgextend-restrict-PVs-with-mixed-block-size.patch - Update lvm.conf files - add devices/allow_mixed_block_sizes item - Update to LVM2.2.03.05 - To drop lvm2-clvm and lvm2-cmirrord rpms (jsc#PM-1324) - Fix Out of date package (bsc#1111734) - Fix occasional slow shutdowns with kernel 5.0.0 and up (bsc#1137648) - Remove clvmd - Remove lvmlib (api) - Remove lvmetad - Drop patches that have been merged into upstream - bug-1114113_metadata-prevent-writing-beyond-metadata-area.patch - bug-1137296_pvremove-vgextend-fix-using-device-aliases-with-lvmetad.patch - bug-1135984_cache-support-no_discard_passdown.patch - Drop patches that have been nonexist/unsupport in upstream - bsc1080299-detect-clvm-properly.patch - bug-998893_make_pvscan_service_after_multipathd.patch - bug-978055_clvmd-try-to-refresh-device-cache-on-the-first-failu.patch - bug-950089_test-fix-lvm2-testsuite-build-error.patch - bug-1072624_test-lvmetad_dump-always-timed-out-when-using-nc.patch - tests-specify-python3-as-the-script-interpreter.patch - Update spec files - merge device-mapper, lvm2-lockd, lvm2 into one spec file - clvmd/lvmlib (api)/lvmetad had been removed, so delete related context in spec file - Update lvm.conf files - remove all lvmetad lines/keywords - add event_activation - remove fallback_to_lvm1 & related items - remove locking_type/fallback_to_clustered_locking/fallback_to_local_locking items - remove locking_library item - remove all special filter rules ==== lvm2-device-mapper ==== Version update (1.02.149 -> 1.02.163) Subpackages: device-mapper libdevmapper-event1_03 libdevmapper1_03 libdevmapper1_03-32bit - Update lvm2.spec: make baselibs.conf to a common source. - Avoid creation of mixed-blocksize PV on LVM volume groups (bsc#1149408) + bug-1149408_Fix-rounding-writes-up-to-sector-size.patch + bug-1149408_vgcreate-vgextend-restrict-PVs-with-mixed-block-size.patch - Update lvm.conf files - add devices/allow_mixed_block_sizes item - Update to LVM2.2.03.05 - To drop lvm2-clvm and lvm2-cmirrord rpms (jsc#PM-1324) - Fix Out of date package (bsc#1111734) - Fix occasional slow shutdowns with kernel 5.0.0 and up (bsc#1137648) - Remove clvmd - Remove lvmlib (api) - Remove lvmetad - Drop patches that have been merged into upstream - bug-1114113_metadata-prevent-writing-beyond-metadata-area.patch - bug-1137296_pvremove-vgextend-fix-using-device-aliases-with-lvmetad.patch - bug-1135984_cache-support-no_discard_passdown.patch - Drop patches that have been nonexist/unsupport in upstream - bsc1080299-detect-clvm-properly.patch - bug-998893_make_pvscan_service_after_multipathd.patch - bug-978055_clvmd-try-to-refresh-device-cache-on-the-first-failu.patch - bug-950089_test-fix-lvm2-testsuite-build-error.patch - bug-1072624_test-lvmetad_dump-always-timed-out-when-using-nc.patch - tests-specify-python3-as-the-script-interpreter.patch - Update spec files - merge device-mapper, lvm2-lockd, lvm2 into one spec file - clvmd/lvmlib (api)/lvmetad had been removed, so delete related context in spec file - Update lvm.conf files - remove all lvmetad lines/keywords - add event_activation - remove fallback_to_lvm1 & related items - remove locking_type/fallback_to_clustered_locking/fallback_to_local_locking items - remove locking_library item - remove all special filter rules ==== openssl-1_0_0 ==== Subpackages: libopenssl1_0_0 libopenssl1_0_0-hmac - OpenSSL Security Advisory [10 September 2019] * EC_GROUP_set_generator side channel attack avoidance. [bsc#1150003, CVE-2019-1547] * Bleichenbacher attack against cms/pkcs7 encryption transported key [bsc#1150250, CVE-2019-1563] - Added patches: * openssl-CVE-2019-1547.patch * openssl-CVE-2019-1563.patch ==== oxygen5-icon-theme ==== Version update (5.61.0 -> 5.62.0) Subpackages: oxygen5-icon-theme-large - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - No code change since 5.61.0 - Replace pkgconfig(Qt5Foo) with cmake(Qt5Foo) in build requirements ==== patterns-base ==== Subpackages: patterns-base-apparmor patterns-base-base patterns-base-basesystem patterns-base-basic_desktop patterns-base-console patterns-base-documentation patterns-base-enhanced_base patterns-base-minimal_base patterns-base-sw_management patterns-base-transactional_base patterns-base-x11 patterns-base-x11_enhanced - Added snapper back to base pattern as recommended package, the workaround for boo#1151148 ==== perl-AnyEvent ==== Version update (7.16 -> 7.17) - updated to 7.17 see /usr/share/doc/packages/perl-AnyEvent/Changes TODO: document TCP_*** constants TODO: add debug/trace logging to some modules TODO: use the eval-with-cb-call trick also to speed up JSON? TODO: FAQ: common pitfalls? invoke-before-return TODO: FAQ: scope-ids? hosts file order? TODO: AnyEvent::Handle with AnyEvent::IO? TODO: invalid. and localhost. specialcasing inside AEDNS and not AESocket (rfc6761) TODO: maybe implement env variable to give hosts precedence TODO: more formats for parse_ipv6 (single ipv6 address without port, ...p80, ...#80) TODO: inet_aton maybe pack C4? no, add a comment why not TODO: socket prepare callbacks, can they easily signal failure as well? TODO: ???? ? <verdrehung(a)gmail.com>, empty A record response causes AnyEvent::resolve_sockaddr to eventually call pack_sockaddr with undef - broken dns server, but maybe improve the response. 7.17 Wed Sep 18 03:04:49 CEST 2019 - work around antique openssl version in RHEL 7 by formatting dh parameters differently (reported by several people). - add t/13_weaken.t. ==== perl-DateTime-TimeZone ==== Version update (2.36 -> 2.37) - updated to 2.37 see /usr/share/doc/packages/perl-DateTime-TimeZone/Changes 2.37 2019-09-11 - This release is based on version 2019c of the Olson database. This release includes contemporary changes for Fiji and Norfolk Island. ==== perl-Pango ==== Version update (1.226 -> 1.227) - Override description in cpanspec - Remove fix-pangocairo_libs.patch (not needed anymore) Add custom dependencies and test to cpanspec.yml - updated to 1.227 see /usr/share/doc/packages/perl-Pango/ChangeLog.pre-git ==== phonon4qt5 ==== Subpackages: libphonon4qt5 phonon4qt5-lang phononsettings phononsettings-lang - Add 0001-Remove-phonon-from-the-include-directory.patch ==== plasma-framework ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Plasma5 plasma-framework-components plasma-framework-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Make notification icons use outline style * Skip test on wayland * Port trivial connects to the new style * make the sizing of the toolbuttons more coherent * make button icons follow a reasonable size and layout (kde#399952) * Allow applets/containments/wallpaper to defer UIReadyConstraint * Make notification icons look like bells * Fix incorrect initial tabs position for vertical tab bars (kde#395390) * Add missing include - Replace foo-devel with cmake(KF5Foo) in build requirements ==== prison-qt5 ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Prison5 prison-qt5-imports - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Include KDE* cmake macros first ==== purpose ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Purpose5 libKF5PurposeWidgets5 purpose-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Fix no device available text * autotests: fix disabling kio debug output * Fixed Telegram Desktop plugin on Fedora * Fix capitalization of Nextcloud * Add missing #include * Remove unused includes * Use new syntax - Replace foo-devel with cmake(KF5Foo) in build requirements ==== python-Twisted ==== Version update (19.2.1 -> 19.7.0) - Remove mailmail when only building Python 3 flavour - Update to 19.7.0: * The callable argument to twisted.internet.task.deferLater() is no longer required. (#9577) * twisted.internet.utils.getProcessOutputAndValue now accepts stdinBytes to write to the child process's standard input. (#9607) * Add new twisted.logger.capturedLogs context manager for capturing observed log events in tests. (#9617) * twisted.internet.base.PluggableResolverMixin, which implements the pluggable resolver interfaces for easier re-use in other reactors, has been factored out of ReactorBase. (#9632) * The PyPI page for Twisted has been enhanced to include more information and useful links. (#9648) - Refresh patch: * skip_MultiCast.patch - Remove merged patch hyperlink.patch ==== python-configparser ==== Version update (3.7.4 -> 4.0.2) - Update to 4.0.2: * sync with upstream ptyhon releases ==== python-cssselect ==== Version update (1.0.3 -> 1.1.0) Subpackages: python2-cssselect python3-cssselect - Switch to multibuild to avoid build cycle with lxml - Update to 1.1.0: * Support for the :scope selector, which allows to access immediate children of a selector. * Support for the |E syntax for type selectors without a namespace. * A new selector method, canonical, returns the CSS expression of the selector, as a string. ==== python-h2 ==== Version update (3.1.0 -> 3.1.1) - Update to 3.1.1: * Ignore WINDOW_UPDATE and RST_STREAM frames received after stream closure. - Drop patch pytest5.patch ==== python-jedi ==== - Skip another time based test test_os_path_join - Skip flaky test test_static_analysis ==== python-lxml ==== Version update (4.4.0 -> 4.4.1) Subpackages: python-lxml-doc python2-lxml python3-lxml - Update to 4.4.1: * LP#1838252: The order of an OrderedDict was lost in 4.4.0 when passing it as attrib mapping during element creation. * LP#1838521: The package metadata now lists the supported Python versions. ==== python-numpy ==== - as bypass boo#1148173 ignore %check error for ppc64/ppc64le ==== python-pexpect ==== - Disable test_large_stdout_stream as it randomly fails ==== python-psutil ==== Version update (5.6.1 -> 5.6.3) - Add patch to skip more tests that won't work in OBS: * skip-obs.patch - Update to 5.6.3: * 1494: [AIX] added support for Process.environ(). (patch by Arnon Yaari) * 1276: [AIX] can't get whole cmdline(). (patch by Arnon Yaari) * 1501_: [Windows] Process cmdline() and exe() raise unhandled "WinError 1168 element not found" exceptions for "Registry" and "Memory Compression" psuedo processes on Windows 10. * 1526_: [NetBSD] process cmdline() could raise MemoryError. (patch by Kamil Rytarowski) - Update to 5.6.2: * 1404: [Linux] cpu_count(logical=False) uses a second method (read from /sys/devices/system/cpu/cpu[0-9]/topology/core_id) in order to determine the number of physical CPUs in case /proc/cpuinfo does not provide this info. * 1458: provide coloured test output. Also show failures on KeyboardInterrupt. * 1464: various docfixes (always point to python3 doc, fix links, etc.). * 1478: add make command to re-run tests failed on last run. * 1456: [Linux] cpu_freq() returns None instead of 0.0 when min/max not available (patch by Alex Manuskin) * 1462: [Linux] (tests) make tests invariant to LANG setting (patch by Benjamin Drung) * 1463: cpu_distribution.py script was broken. * 1470: [Linux] disk_partitions(): fix corner case when /etc/mtab doesn't exist. (patch by Cedric Lamoriniere) * 1472: [Linux] cpu_freq() does not return all CPUs on Rasbperry-pi 3. * 1493: [Linux] cpu_freq(): handle the case where /sys/devices/system/cpu/cpufreq/ exists but is empty. ==== python-pyasn1 ==== Version update (0.4.5 -> 0.4.7) Subpackages: python2-pyasn1 python3-pyasn1 - Update to 0.4.7: * Many bugfixes all around, see CHANGES.rst ==== python-pyasn1-modules ==== Version update (0.2.5 -> 0.2.6) - Update to 0.2.6: * variour RFC enhancements, see CHANGES.txt ==== python-pycryptodome ==== Version update (3.8.2 -> 3.9.0) Subpackages: python2-pycryptodome python3-pycryptodome - Update to 3.9.0: * Add support for loading PEM files encrypted with AES256-CBC. * Add support for XChaCha20 and XChaCha20-Poly1305 ciphers. * Add support for bcrypt key derivation function (Crypto.Protocol.KDF.bcrypt). * Add support for left multiplication of an EC point by a scalar. * Add support for importing ECC and RSA keys in the new OpenSSH format. ==== python-pytz ==== Subpackages: python2-pytz python3-pytz - Add versioned dependency on timezone database to ensure the correct data is installed - Remove system_zoneinfo.patch, and instead add a symlink to the system timezone database - Replace unnecessary pytest, adding a missing __init__.py in the tests to allow the test suite to work on Python 2.7 without pytest ==== python-pyxdg ==== - Fix test data to use sys.executable ==== python-setuptools ==== Subpackages: python2-setuptools python3-setuptools - Define LANG in %check to fix openSUSE/SLE 15 testsuite ==== python-urllib3 ==== - Use have/skip_python2/3 macros to allow building only one flavour ==== python2-numpy ==== - as bypass boo#1148173 ignore %check error for ppc64/ppc64le ==== qqc2-desktop-style ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Prevent dragging QQC2 ComboBox contents outside menu * metainfo.yaml: set fancy name, auto-name from cmake project() is not nice * metainfo.yaml: remove bogus note about library to link to - Replace foo-devel with cmake(KF5Foo) in build requirements ==== re2 ==== Version update (20190801 -> 20190901) - update to 2019-09-01: * build system fixes ==== rsibreak ==== Version update (0.12.10 -> 0.12.11) Subpackages: rsibreak-lang - Update to 0.12.11: * Improve notification integration with the notification KCM * Translation improvements * Minor code cleanup - Switch Qt5/KF5 BuildRequires to cmake() style ==== rubygem-yast-rake ==== Version update (0.2.34 -> 0.2.36) - Submit the SLE12-SP5 packages to Updates (not to GA) (bsc#1149771) - Added the SLE15-SP2 target - 0.2.36 - Using rb_default_ruby_abi tag in the spec file in order to handle several ruby versions (bsc#1146403). - 0.2.35 ==== solid ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5Solid5 libKF5Solid5-lang solid-imports solid-tools - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Make battery serial property constant * Only build tests when DBus is available * Expose technology property in battery interface * Remove unused includes - Replace pkgconfig(Qt5Foo) with cmake(Qt5Foo) in build requirements ==== sonnet ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5SonnetCore5 libKF5SonnetCore5-lang libKF5SonnetUi5 - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Add option to build Qt Designer plugin (BUILD_DESIGNERPLUGIN, default ON) * Fix build: include QJsonArray for voikkodict.cpp needed with Qt 5.13 * MSVC++ needs QVector it seems. * Remove unused includes ==== syndication ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes * Include ECMGeneratePriFile after KDEInstallDirs ==== syntax-highlighting ==== Version update (5.61.0 -> 5.62.0) Subpackages: libKF5SyntaxHighlighting5 libKF5SyntaxHighlighting5-lang - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Improve API documentation for Definition::setKeywordList() * C & ISO C++: add digraphs (folding & preprocessor) (kde#411508) * Markdown, TypeScript & Logcat: some fixes * Format class: add functions to know if XML files set style attributes * update matlab test refs * combine test.m stuff into existing highlight.m * Support for native Matlab strings * Gettext: Add "Translated String" style and spellChecking attribute (kde#392612) * reST: handle some more corner cases, add an actual test file * Set the OpenSCAD indenter to C-style instead of none. * Possiblity to change Definition data after loading * Highlighting indexer: check kateversion * Markdown: multiple improvements and fixes (kde#390309) * JSP: support of <script> and <style> ; use IncludeRule ##Java * LESS: import CSS keywords, new highlighting and some improvements * JavaScript: remove unnecessary "Conditional Expression" context * New syntax: SASS. Some fixes for CSS and SCSS (kde#149313) * Use CMake find_dependency in CMake config file instead of find_package * SCSS: fix interpolation (#{...}) and add the Interpolation color * fix additionalDeliminator attribute (kde#399348) * C++: contracts are not in C++20 * Gettext: fix "previous untranslated string" and other improvements/fixes * Jam: Fix local with variable without initilisation and highlight SubRule * Remove unused includes * implicit fallthough if there is fallthoughContext * restore right file paths * Add common GLSL file extensions (.vs, .gs, .fs) * Latex: several fixes (math mode, nested verbatim, ...) (kde#320303) * Lua: fix color of end with several levels of condition and function nesting * Highlighting indexer: all warnings are fatal * Include KDE* cmake macros first ==== threadweaver ==== Version update (5.61.0 -> 5.62.0) - Update to 5.62.0 * New feature release * For more details please see: * https://www.kde.org/announcements/kde-frameworks-5.62.0.php - Changes since 5.61.0: * Remove unused includes ==== timezone ==== Version update (2019b -> 2019c) - timezone update 2019c (bsc#1150451) * Fiji observes DST from 2019-11-10 to 2020-01-12. * Norfolk Island starts observing Australian-style DST. ==== timezone-java ==== Version update (2019b -> 2019c) - timezone update 2019c (bsc#1150451) * Fiji observes DST from 2019-11-10 to 2020-01-12. * Norfolk Island starts observing Australian-style DST. ==== transactional-update ==== Version update (2.15 -> 2.16) Subpackages: transactional-update-zypp-config - Update to version 2.16 - Use default command if options, but no command was given [boo#1146116] - Make sure only one process appears in `ps` output [boo#1111897] - Move update check: If a new repository is added (and ZYPPER_AUTO_IMPORT_KEYS is set) adding the new repository key won't fail any more - Avoid unnecessary snapshots / reboots by detecting zypper operations without changes more reliably (e.g. when installing an already installed package) - Update the manpage accordingly - Bugfixes: - Ignore commented lines in fstab when checking for shadowed files - Avoid warning when copying network config - Remove Perl dependency - Building documentation requires Python 3 now ==== yast2 ==== Version update (4.2.19 -> 4.2.23) Subpackages: yast2-logs - Use "display_name" tag for the product label, "label" marks a translatable text (jsc#SLE-7214) - 4.2.23 - Added support for reading products from control.xml file (jsc#SLE-7104) - 4.2.22 - support reading licenses from tar archive (jsc#SLE-7214) - 4.2.21 - Fix a problem when long warnings reports in command line (bsc#1149776). - 4.2.20 ==== yast2-control-center ==== Version update (4.2.1 -> 4.2.2) Subpackages: yast2-control-center-qt - Fix appdata for new spec (fate#319035) - 4.2.2 ==== yast2-country ==== Version update (4.2.4 -> 4.2.5) Subpackages: yast2-country-data - Add missing Persian/Farsi language and keyboard layout (bsc#1092920). - 4.2.5 ==== yast2-dns-server ==== Version update (4.2.2 -> 4.2.4) - Permit the user to force an netconfig update when netconfig was not able to change the configuration. (bsc#1123985) - 4.2.4 - Do not modify the service when finishing the wizard dialog as the configuration has not been written yet. (bsc#1123985) - 4.2.3 ==== yast2-installation ==== Version update (4.2.12 -> 4.2.14) - Support for the online installation medium (jsc#SLE-7214) - 4.2.14 - do NOT remove /mnt/run, it's a mounted directory (bsc#1149011) - 4.2.13 ==== yast2-network ==== Version update (4.2.11 -> 4.2.12) - bnc#1149234 - apply udev rule from AY profile according to device's mac value when permanent_mac is missing in list of the device's options - bsc#1133442 - Increased the DHCP timeout when NetworkManager is in use to its default (45 seconds). - 4.2.12 ==== yast2-packager ==== Version update (4.2.24 -> 4.2.27) - Support for the online installation medium (jsc#SLE-7214) - 4.2.27 - Properly initialize the used base product name at upgrade (bsc#1150856) - 4.2.26 - Added Y2Packager::MediumType class for detecting the installation medium type (related to jsc#SLE-7214) - 4.2.25 ==== yast2-schema ==== Version update (4.2.2 -> 4.2.3) - Ignoring X-SuSE-YaST-AutoInstResourceAliases entries in desktop files while evaluating resources (bsc#1144894). - 4.2.3 ==== yast2-security ==== Version update (4.2.1 -> 4.2.2) - AY: Supporting user defined permission files like "/etc/permissions.ultra". (bsc#1147173) - 4.2.2 ==== yast2-services-manager ==== Version update (4.2.4 -> 4.2.5) - Set BaseTargets::GRAPHICAL and Target::GRAPHICAL if package "xdm" will be installed (instead of xorg-x11-server) (bsc#1140735). - 4.2.5 ==== yast2-storage-ng ==== Version update (4.2.35 -> 4.2.40) - Partitioner: allow creating encrypted swap with random password (bsc#1088641). - Partitioner: allow importing mount points from encrypted swap with random password. - Storage: fix an encryption type inconsistency (bsc#1151079). - 4.2.40 - add warning if /boot is on a LUKS2 encrypted partition - 4.2.39 - Partitioner: better handling of existing encryptions, including the possibility of reusing them (related to jsc#SLE-7376). - added translation for new EncryptionType::PLAIN (bsc#1088641) - 4.2.38 - bind-mount /run from inst-sys to target system during install (bsc#1136463) - 4.2.37 - Partitioner: display encryption type (related to jsc#SLE-7376). - 4.2.36 ==== yast2-trans ==== Version update (84.87.20190901.3784ecca69 -> 84.87.20190922.d5dcfb03ab) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en yast2-trans-en_GB yast2-trans-en_US yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20190922.d5dcfb03ab: * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * New POT for text domain 'registration'. * New POT for text domain 'packager'. * New POT for text domain 'languages_db'. * New POT for text domain 'installation'. * New POT for text domain 'dns-server'. * New POT for text domain 'country'. * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Japanese) * Translated using Weblate (Dutch) * Translated using Weblate (Czech) * Translated using Weblate (Catalan) * New POT for text domain 'storage'. * New POT for text domain 'qt'. * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (Albanian) * Translated using Weblate (Albanian) * Translated using Weblate (Albanian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Czech) * Translated using Weblate (Catalan) * Translated using Weblate (Dutch) * Translated using Weblate (Japanese) * New POT for text domain 'storage'. * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) - Update to version 84.87.20190914.95e52b2a7e: * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Albanian) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Danish) * Translated using Weblate (Albanian) * New POT for text domain 'network'. * Translated using Weblate (Danish) * Translated using Weblate (Albanian) * Translated using Weblate (Albanian) * Translated using Weblate (Albanian) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Catalan) * Translated using Weblate (Albanian) * Translated using Weblate (Albanian) * Translated using Weblate (German) - Update to version 84.87.20190908.31319e7018: * Translated using Weblate (Albanian) * Translated using Weblate (Albanian) * Translated using Weblate (Albanian) * Translated using Weblate (Slovak) * Translated using Weblate (Finnish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Dutch) * Translated using Weblate (Albanian) * Translated using Weblate (Japanese) * Translated using Weblate (Czech) * New POT for text domain 'storage'. * New POT for text domain 'security'. * New POT for text domain 'storage'. ==== yast2-ycp-ui-bindings ==== Version update (4.1.0 -> 4.2.1) - added example using scrollbar positions of RichText widget with hyperlinks (bsc#1150498) - 4.2.1 - added example using scrollbar positions of RichText widget (bsc#1150498) - 4.2.0 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0