February 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Tumbleweed: SSHD not starting during boot, manual restart works after boot has finished
by Johannes Kastl 15 Feb '16

15 Feb '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, a quick search in the mailinglist archives does not reveal anything related, so: On my Tumbleweed machine sshd does not start during boot, once the machine is up I can restart it without errors. # systemctl status sshd > Jan 16 10:25:19 XYZ systemd[1]: sshd.service: Unit entered failed > state. Jan 16 10:25:19 XYZ systemd[1]: sshd.service: Failed with > result 'start-limit'. Jan 16 10:25:19 XYZ systemd-coredump[1488]: > Process 1485 (sshd) of user 0 dumped core. #journalctl -u sshd -b > -- Logs begin at .... -- Jan 16 10:25:19 XYZ systemd[1]: > sshd.service: Unit entered failed state. Jan 16 10:25:19 XYZ > systemd[1]: sshd.service: Failed with result 'start-limit'. Jan > 16 10:25:19 XYZ systemd-coredump[1488]: Process 1485 (sshd) of > user 0 dumped core. -- Subject: Process 1485 (sshd) dumped core > -- Defined-By: systemd -- Support: > http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- > Documentation: man:core(5) -- -- Process 1485 (sshd) crashed and > dumped core. -- -- This usually indicates a programming error in > the crashing program and -- should be reported to its vendor as a > bug. I'm not sure when it started, as you can see the log is from 16th of January. I just tested it again today, it seems to work on some boots, but still I see this (3 out of 5 times today). System is: openSUSE 20160130 (x86_64) VERSION = 20160130 CODENAME = Tumbleweed Any hints? Ringing any bells? Johannes -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 Comment: Using GnuPG with SeaMonkey - http://www.enigmail.net/ iEYEARECAAYFAla3iZwACgkQzi3gQ/xETbIAuACfZTa9jBNrRPR9lUaN4hLlWv49 5sYAn080pkIviY+5cNfSiIiW1ISiUbRY =jWKQ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 6

[opensuse-factory] TW has fallen and cannot get back up
by Robert Schweikert 15 Feb '16

15 Feb '16

Hi, Could use some help.... I know don't reboot a running system.... but kidding aside, yesterday I did reboot TW system Lenovo X1 Carbon, all Intel HW, and well that was it. When the system attempts to boot I end up with Ignoring BGRT: Invalid version 0 (expected 1) on the screen after the initial messages about initrd and kernel loading, (boo#966255). The symptom is that the message shows up, then the screen goes blank and then the message is redisplayed. Thus I think this is the point where I would under regular circumstances enter the passphrase for my encrypted partition. What I have done so far: Booted into a rescue system and mounted the partition on the disk that is root as well as the FAT partition that is /boot/efi. At first this complained about fs corruption, thus I repaired things with dosfsck -a then set hings up such that I could chroot to the harddrive and then re-installed the bootloader using "yast bootloader" this should have taken care of anything related to issues with /boot/efi. For completeness and to avoid misunderstanding tty1: Rescue:~ # mount /dev/sda3 /mnt tty1: Rescue:~ # mount /dev/sda1 /mnt/boot/efi tty1: Rescue:~ # mount --bind /proc /mnt/proc ....... tty1: Rescue:~ # chroot /mnt Rescue:~ # yast bootloader No errors were displayed during the process. This was to no avail, you guessed it or I would not be writing this message. My next step (also yesterday) was to set up networking and update whatever packages TW might have to offer, i.e. get networking running in the rescue system, setup the chroot zypper dup --no-allow-vendor-change This removed libply-boot-client2, libply-splash-core2,libply-splash-graphic2, and libply2 and thus I thought maybe that would do the trick, but it didn't. Today there is a new snapshot available and I pulled it. Brought along new grub2 packages. Unfortunately that didn't address the issue either. So, how do I recover? My gut feel is that it has something to do with the early graphical environment, and it would be worth a shot a turning all the fancy stuff off. How do I do that? Help is much appreciated, Robert -- Robert Schweikert MAY THE SOURCE BE WITH YOU Public Cloud Architect LINUX rjschwei(a)suse.com IRC: robjo

8 13

[opensuse-factory] virus sent by opensuse.org?
by Marguerite Su 15 Feb '16

15 Feb '16

Hi, I received two emails (today and yesterday), both with a .doc attachment, which is marked as virus by Gmail. I deleted the first one, the second is send from scanner(a)opensuse.org. The title is "Scan from KM1650" Can anyone tell me what is it? Marguerite -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 10

[opensuse-factory] why there are so few packages in Factory, revisited
by Michal Kubecek 15 Feb '16

15 Feb '16

Hello, you might remember recent discussion in opensuse-factory mailing list on this topic. While the statistics that started it were inherently flawed, there seemed to be a consensus that Factory doesn't have as many packages as it could and that there are many packages in devel projects or home projects that are never submitted to Factory. I considered sending my opinion why but I was afraid it might start a flame without any positive outcome. Recent experience conviced me to try anyway. Disclaimer: the sole purpose of this e-mail is to present my view on the problem and to give responsible people something to think about. It is definitely not meant as a complaint about the particular case (which serves only as an example) or some kind of pointing fingers. Short version: I believe main reason why too many packages never move from home or devel projects to Factory is that on one hand, OBS made it extremely easy to build a package for a set of distributions and even add your own repository with such packages; on the other hand, once you decide to get the Factory, you have to tackle constantly increasing amount of "bureaucracy" to even get the package in and then face a stream of pointless changes in the name of some high standards which are apparently constantly changing and actually not even universally accepted at any given moment. There is a popular phrase about "scratching an itch". The problem, as I see it, is that to scratch one's itch, home project is sufficient. If you are an altruist, you might even push the package into a devel project so that it stands out in the search. But getting it into Factory, that's no more about scratching your itch; you must have really strong motivation for that - and even stronger to do it again once you know what you are going to face. Let's look at an example. Few years ago, I discovered tcpreplay, a set of network utilities which are quite handy when investigating networking issues. I created a package, did my best to avoid OBS warnings and put it into a project under my home so that I could easily install it on my machines. That scratched my itch. Later some guy created a submit request for network:utilities; I checked the package, updated it to new versions, did some cleanup and package ended up in network:utilities. After the December discussion, I decided to submit the tcpreplay to Factory. I checked the build, polished the specfile a bit and submitted it. The request was declined by a check script because a copyright was missing. OK, fair enough, while I don't consider that particular specfile such a great piece of art to need a copyright, why not. I ran the specfile through the spec cleaner service (which often happens automatically with "osc build" but for some reason this wasn't the case). It did some rearrangement and style changes; some I didn't quite like but nothing crucial, so I resubmitted the package. With that submit request still waiting in staging repo, on Sunday I got a request against network:utilities. I didn't have time to review it so I left it to the morning. Before I could do so, 5 hours after creation of the request, to my surprise, it was accepted by the guy who originally poked me to submit the package to network:utilities (but never contributed to the package in any way since). I checked the changes anyway (after all, I'm bugowner so I feel responsible for the package) and I really don't know what to think: https://build.opensuse.org/package/rdiff/network:utilities/tcpreplay?linkre… - replace xz compressed tarball by the original gzipped one For years I've been told by OBS that I should repack gzipped tarballs to save resources. It's not true any more? OK, it allows for checking the signature so it makes sense. - make BuildRoot specification unconditional For years I've been told that it is obsolete. The only reason I keep it is to allow build for SLE11. Why forcing it on distributions that don't need it? - replace source files by full URL I don't like this change. More precisely: I hate it. - add "-q" to %setup Why? No idea. - add "V=1" to make Why? To make build warnings harder to see? - break configure line into two If it needed breaking, I would do so. This one had 32 characters... Seriously? - replace ${RPM_BUILD_ROOT} with %{buildroot} The only rule I have ever seen about this was there is no rule. - add %{?_smp_mflags} also to make install Well, why not. But definitely not _after_ the argument. - add LICENSE to the package OK, why not. - %files: expand wildcards to explicit lists Some people apparently prefer package build to fail whenever a file is added or renamed. I don't force them not to do so in their packages, could they respect my preferences in mine? Apparently not. - reorder tags in specfile header I'm confused. The previous order was what spec cleaner did. Wasn't it supposed to be The Right Order(TM)? And what happens next time spec cleaner service is run? Is it going to change the order back, masking real changes? Summary: lot of meaningless churn, one useful change, two I dislike and two (or two and a half) I really dislike. And a bad feeling that while I took responsibility for the package, I apparently have no say in what should its specfile look like. Don't understand me wrong: I have no problem with reasonable rules, even if they are quite strict (like the tagging policy in our kernel packages or strict coding style policy in kernel networking). But here I feel this crosses a line of harassment. OK, I'll learn to live with it. I'll bite the bullet with packages like firebird or twinkle which are kind of "heart thing". But next time I stumble upon a package that might be useful, I'll think twice before submitting it to Factory. Had I known what was going to happen, well, there would be one less package in Factory (assuming tcpreplay is going to make it). And just today, I got a reaction like "Been there. I know exactly what you are talking about." Sure, you may say that it's my fault I don't understand openSUSE high standards. You might even say openSUSE is not interested in packagers who don't understand its high standards. But you should understand in the end it's always packager's choice if he is going to submit the package to Factory or not. And remember, to "scratch an itch", putting it into a home project is enough in most cases; submitting to Factory is not about "scratching an itch", it's about helping others; things like this work as an active discouragement. Think about it next time you ask yourself why so many packages stay in home or devel project without ever being submitted to Factory. Or, even better, think about it next time you feel urge to completely rearrange a package you are not maintaining (and not going to) just to force your aesthetic criteria on it (and its maintainer). Michal Kubeček -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

34 92

Re: [opensuse-factory] New Tumbleweed snapshot 20160209 released!
by Michal Hlavac 14 Feb '16

14 Feb '16

hi, why yast2-3.1.173-1.1 installs ruby2.1? On piatok, 12. februára 2016 1:59:08 CET Ludwig Nussel wrote: > > Please note that this mail was generated by a script. > The described changes are computed based on the x86_64 DVD. > The full online repo contains too many changes to be listed here. > > Please check the known defects of this snapshot before upgrading: > https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… > > Packages changed: > alsa > alsa-plugins > diffstat (1.60 -> 1.61) > ghostscript-fonts-grops > git (2.7.0 -> 2.7.1) > glib2 > grub2 > gtk3 (3.18.6 -> 3.18.7) > installation-images-openSUSE (14.211 -> 14.224) > kiwi (7.03.49 -> 7.03.53) > libreoffice (5.1.0.2 -> 5.1.0.3) > perl-XML-XPath (1.24 -> 1.30) > plasma5-pk-updates > python-ipaddr (2.1.10 -> 2.1.11) > python3-pycurl (7.21.5 -> 7.43.0) > squashfs > thin-provisioning-tools (0.6.0 -> 0.6.1) > webkit2gtk3 (2.10.4 -> 2.10.7) > xterm (320 -> 322) > yast2 (3.1.163 -> 3.1.173) > yast2-samba-client (3.1.15 -> 3.1.16) > yast2-storage (3.1.74 -> 3.1.75) > yast2-users (3.1.41 -> 3.1.44) > > === Details === > > ==== alsa ==== > Subpackages: alsa-devel libasound2 libasound2-32bit > > - Backports from upstream: minor PCM fixes, topology API updates, > and a few build cleanup: > 0002-pcm-simple-Fix-asserts.patch > 0003-topology-open-topology-files-with-O_TRUNC.patch > 0004-topology-Remove-unused-function-write_data_block.patch > 0005-topology-Remove-unused-variables.patch > 0006-topology-Fix-comparison-of-unsigned-expression-0.patch > 0007-topology-Not-compare-a-for-loop-iterator-with-ABI-__.patch > 0008-topology-Quit-and-show-error-message-on-big-endian-m.patch > 0009-config-files-do-not-include-ucm-topology-configurati.patch > 0010-control-add-missing-asserts-to-ctl_elem_set-function.patch > 0011-pcm_hw-fix-possible-memory-leak-coverity.patch > 0012-coverity-fixes.patch > 0013-topology-fix-debug-output-to-print-correct-max-value.patch > > ==== alsa-plugins ==== > Subpackages: alsa-plugins-32bit alsa-plugins-pulse alsa-plugins-pulse-32bit > > - Backport upstream fixes: build fixes with the recent ffmpeg > 0001-speex-Add-missing-include-config.h.patch > 0002-a52-fix-reported-input-channel-order.patch > 0003-pph-include-config.h-from-rate_speexrate.c.patch > - Drop the obsoleted patch: > alsa-plugins-include-config.h.patch > > ==== diffstat ==== > Version update (1.60 -> 1.61) > > - Update to 1.61 > * add -T option to show amount of changes next to histogram. > * if -S option is given, check for unmodified files and add those > to the report. > * update configure macros > * update config.guess, config.sub > > ==== ghostscript-fonts-grops ==== > > - Use %requires_eq > > ==== git ==== > Version update (2.7.0 -> 2.7.1) > Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk > > - git 2.7.1: > * fix hooks and aliases fixes with GIT_WORK_TREE > * fix "git send-email" reading escaped quotes in mutt alias files > * fix some crashes and regressions > > ==== glib2 ==== > Subpackages: glib2-devel glib2-tools libgio-2_0-0 libgio-2_0-0-32bit libglib-2_0-0 libglib-2_0-0-32bit libgmodule-2_0-0 libgmodule-2_0-0-32bit libgobject-2_0-0 libgobject-2_0-0-32bit libgthread-2_0-0 libgthread-2_0-0-32bit > > - Fix default mime handler associtations: since GLIB 2.42, the file > in question is no longer defaults.list (too unspecific), but is > called mimeapps.list. Touch and link the right files. > > ==== grub2 ==== > Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen > > - Add config option to set efi xen loader command line option (bsc#957383) > * added grub2-efi-xen-cmdline.patch > - Drop ppc64le patches. Build stage1 as BE for Power > Droped patches: > - grub2-ppc64le-01-Add-Little-Endian-support-for-Power64-to-the-build.patch > - grub2-ppc64le-02-Build-grub-as-O1-until-we-add-savegpr-and-restgpr-ro.patch > - grub2-ppc64le-03-disable-creation-of-vsx-and-altivec-instructions.patch > - grub2-ppc64le-04-powerpc64-LE-s-linker-knows-how-to-handle-the-undefi.patch > - grub2-ppc64le-05-grub-install-can-now-recognize-and-install-a-LE-grub.patch > - grub2-ppc64le-06-set-the-ABI-version-to-0x02-in-the-e_flag-of-the-PPC.patch > - grub2-ppc64le-07-Add-IEEE1275_ADDR-helper.patch > - grub2-ppc64le-08-Fix-some-more-warnings-when-casting.patch > - grub2-ppc64le-09-Add-powerpc64-types.patch > - grub2-ppc64le-10-powerpc64-is-not-necessarily-BigEndian-anymore.patch > - grub2-ppc64le-11-Fix-warnings-when-building-powerpc-linux-loader-64bi.patch > - grub2-ppc64le-12-GRUB_ELF_R_PPC_-processing-is-applicable-only-for-32.patch > - grub2-ppc64le-13-Fix-powerpc-setjmp-longjmp-64bit-issues.patch > - grub2-ppc64le-14-Add-powerpc64-ieee1275-trampoline.patch > - grub2-ppc64le-15-Add-64bit-support-to-powerpc-startup-code.patch > - grub2-ppc64le-16-Add-grub_dl_find_section_addr.patch > - grub2-ppc64le-17-Add-ppc64-relocations.patch > - grub2-ppc64le-18-ppc64-doesn-t-need-libgcc-routines.patch > - grub2-ppc64le-19-Use-FUNC_START-FUNC_END-for-powerpc-function-definit.patch > - grub2-ppc64le-20-.TOC.-symbol-is-special-in-ppc64le-.-It-maps-to-the-.patch > - grub2-ppc64le-21-the-.toc-section-in-powerpc64le-modules-are-sometime.patch > - grub2-ppc64le-22-all-parameter-to-firmware-calls-should-to-be-BigEndi.patch > - grub2-ppc64le-fix-64bit-trampoline-in-dyn-linker.patch > - grub2-ppc64le-timeout.patch > - grub2-ppc64-build-ppc64-32bit.patch > - Added patches: > - biendian.patch > - grub2-ppc64-cas-reboot-support.patch > - libgcc-prereq.patch > - libgcc.patch > - ppc64_opt.patch > - ppc64le.patch > > ==== gtk3 ==== > Version update (3.18.6 -> 3.18.7) > Subpackages: gtk3-data gtk3-devel gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 > > - Update to version 3.18.7: > + Bugs fixed: bgo#688524, bgo#722937, bgo#728344, bgo#754868, > bgo#757147, bgo#758908, bgo#758929, bgo#759079, bgo#759081, > bgo#759091, bgo#759260, bgo#759757, bgo#760141, bgo#760169, > bgo#760416, bgo#760445, bgo#760615, bgo#760680, bgo#760891, > bgo#760897, bgo#760964, bgo#761005, bgo#761095. > + Updated translations. > - Drop gtk3-qemu-usb-tablet-is-no-real-touchscreen.patch and > gtk3-gdk_pixbuf_get_from_surface.patch: Fixed upstream. > > ==== installation-images-openSUSE ==== > Version update (14.211 -> 14.224) > > - drop the '(SNAPSHOT)' part of displayed Tumbleweed version (bsc#965645) > - 14.224 > - adjust product/version handling > - 14.223 > - don't chainload shim for now (bsc#963919) > - 14.222 > - adjust rubygem handling > - 14.221 > - fix typo in Makefile > - 14.220 > - rework product/version handling to use the values from /etc/os-release > - 14.219 > - filelists: glib looks for mime handler list in mimeapps.list > - 14.218 > - nvme module has been moved (bsc#963114) > - 14.217 > - also include VERSION files for ruby gems > - 14.216 > - squashfs.ko might depend on lz4_decompress (bsc#962493) > - 14.215 > - ensure /etc/hosts is writable (bsc#961880) > - 14.214 > - Add IBM vNIC module > - 14.213 > - noto-sans has been renamed to noto-sans-fonts > - 14.212 > - Correct name of vmlinuz-xen symlink > > ==== kiwi ==== > Version update (7.03.49 -> 7.03.53) > Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-pxeboot kiwi-templates kiwi-tools > > - v7.03.53 released > - Fixed disk bundler for install stick target > The bundler looked up the wrong extension. This fixes #542 > - Preserve package cache only if it exists > - v7.03.52 released > - Fixed use of noglob shell option > - v7.03.51 released > - Fixed updateRootDeviceFstab > Support by-label mount entries for btrfs subvolumes > This fixes bnc#964474 > - Don't add kernel filesystems to fstab > Systems with systemd which this kiwi version aims for, doesn't > need proc, sysfs, debugfs and friends to be part of the fstab > This fixes bnc#964472 > - Update rhel6 template > Added Vagrantfile to build via dice > - Update rhel6 template > delete unused oracle linux build target > - v7.03.50 released > - Allow system to be installed on btrfs snapshot > This fixes (bnc#946648) > - Put kiwi_btrfs_root_is_snapshot to boot profile > This is related to (bnc#946648) > - Evaluate kiwi_btrfs_root_is_snapshot in boot code > If set it's required to mount the subvolumes like it is > done with lvm volumes. In addition this patch fixes the > update of the fstab file which has to contain an entry > for each subvolume excluding snapshots and the toplevel > This is related to (bnc#946648) > - Added get/set(er) for btrfs_root_is_snapshot attr > This is related to (bnc#946648) > - Added btrfs_root_is_snapshot attribute > This is related to (bnc#946648) > - Fixed pxe type setup for s390 SLE12-community-JeOS > - Added util-linux to SLE12-community-JeOS for s390 > > ==== libreoffice ==== > Version update (5.1.0.2 -> 5.1.0.3) > Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions > > - Un-split the gtk3 from separate module 5.1 should be stable enough > - Do not install the appdata xml files twice bnc#965294 > - Version update to 5.1.0.3: > * Various small fixes on road to final tag > * Update internal tarballs for sle11 build > - Fix requires on libmysqlclient_r18 on SLE11 > - Fix a bug on es provides with en-GB > - Provide l10n-pt from pt-PT > > ==== perl-XML-XPath ==== > Version update (1.24 -> 1.30) > > - updated to 1.30 > see /usr/share/doc/packages/perl-XML-XPath/Changes > 1.30 2016-02-04 MANWAR > - Fixed issue RT #15902 (Quoting warnings with translate). > - Fixed issue RT #21154 (translate() function does not remove characters or support -) > 1.29 2016-02-03 MANWAR > - Fixed issue RT# 26144 (createNode doesn't honor position() predicate). > 1.28 2016-01-31 MANWAR > - Changed the LICENSE information about the package XML::XPath::PerlSAX as per > Matt Sergeant email response (dated 2016-01-30). > 1.27 2016-01-30 MANWAR > - Fixed issue RT# 32012 (Debian bug #187583, http://bugs.debian.org/187583) > - updated to 1.26 > see /usr/share/doc/packages/perl-XML-XPath/Changes > 1.26 2016-01-25 MANWAR > - Fixed inconsistent version issue (CPANTS). > - Added key 'provides' to the Makefile.PL script. > - Added unit test scripts t/meta-json.t and t/meta-yml.t > 1.25 2016-01-20 MANWAR > - Merged in GitHub PR #2, thanks to sdeseille. > - Merged t/45overloading_number_operator.t and t/99rt_11724.t into t/45cmp_nodeset.t > > ==== plasma5-pk-updates ==== > > - Change the obsoletes for apper to a higher version number to > make sure that it gets removed. Current apper version is 0.9.2 and > therefore higher than the version of plasma5-pk-updates > > ==== python-ipaddr ==== > Version update (2.1.10 -> 2.1.11) > > Update to upstream ipaddr 2.1.11 > - hostmask parsing bug fixed by pmarks (a nearly complete rewrite of the mask parsing code) > - i97, incorrectly parses some v6 addresses. > - docstring typos. > - i95, refer to the nets in the exception raised by collapse_address_list > - add license to boilerplate to test-2to3.sh > > ==== python3-pycurl ==== > Version update (7.21.5 -> 7.43.0) > > - update to version 7.43.0: > * Highlights of this release: > + Binary wheels are now built for Windows systems. > + setopt_string method added to Curl objects to permit setting > string libcurl options that PycURL does not know about. > + curl module can now be imported on Windows again. > + OPENSOCKETFUNCTION callback is now invoked with the address as > bytes on Python 3 as was documented. > + Support for many libcurl options and constants was added. > > ==== squashfs ==== > > - fix build for SLE12 and older > > ==== thin-provisioning-tools ==== > Version update (0.6.0 -> 0.6.1) > > - Update to 0.6.1 > * enable builds with static cxx library > - Make building more verbose > > ==== webkit2gtk3 ==== > Version update (2.10.4 -> 2.10.7) > Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles > > - Update to version 2.10.7: > + Fix the build with GTK+ < 3.16. > - Update to version 2.10.6: > + Fix a deadlock in the Web Process when JavaScript garbage > collector was running for a web worker thread that made google > maps to hang. > + Fix media controls displaying without controls attribute. > + Fix a Web Process crash when quickly attempting many DnD > operations. > > ==== xterm ==== > Version update (320 -> 322) > Subpackages: xterm-bin > > - Patch #322 - 2016/01/02 > * fix regression due to incorrect fix for compiler warning when > allocating storage for /etc/shells (reports by Ashish Shukla, > Debian #809646). > - Patch #321 - 2015/12/31 > * add resource keepClipboard, escape sequence and action > keep-clipboard. > * add optional feature to capture text copied to clipboard at > the time of copying rather than at the time the clipboard > contents are requested for pasting (patch by Milan Mehner). > * improve a special case where the -e option was used to pass a > single-quoted command via luit, by wrapping it in a ?sh -c? > (report by Keith Hedger). > * minor fix for type-cleanliness when allocating storage for > /etc/shells (Tobias Stoeckmann). > * fix a typo in manual page (Dan Church). > * fix minor file-descriptor leak; after calling openpty, the > slave's file descriptor is not needed (report by Juha > Nurmela). > * editorial change to ctlseqs.ms (report by David Gomboc). > * minor updates for autoconf macros. > * update config.guess, config.sub > - vttest 20140305 > * save/restore color enable-flag for menu 11.6 in a couple of > places so that the ISO-6429 tests do not reset it > unexpectedly. > * amend the REP test to not reset colors if it happens to be > run via the menu entry for BCE-related tests. > - vttest 20140116 > * cosmetic changes (suggested by Itay Chamiel): > + clear screen just before resetting SCS in menu #3 character > sets, in case a VT100 emulator does not simply ignore VT220 > G2/G3 selections when it does not implement them. > + add check for maximum operating level before deciding > whether to send a DECSCL to set it to VT100-level. > + adjust starting point of items for menu #9 "Test of known > bugs" to avoid overwriting part of the description of the > test. > * add configure check for -Wlogical-op to gcc-warnings > * update config.guess, config.sub > - vttest 20130915 > * when NRCS is active, suppress ISO Latin-1 from menu to avoid > confusion with British NRCS. > * do not highlight ISO Latin-1 for NRCS, since it is a > 96-character set, not applicable to NRCS. > * correct position of ruler for SD and REP screens, which > obscured the result. > * expand menu 11.6.6 to demonstrate bce with top-level menus 1 > and 2 in addition to the existing menu 8. > * correct description for DA response 24; it denotes VT320. > * correct highlighting for French NRC mapping; "`" is not > mapped. > * add port-files from FreeBSD for test-builds. > * add highlighting information for VT320 Portuguese NRC > mapping. > * add highlighting information for VT220 DEC Supplemental NRC > mapping. > * updated configure-macros to add msys changes from ncurses > 20130907. > * update config.guess, config.sub > - vttest 20130818 > * modify character-sets screens to optionally highlight the > characters which do not correspond to ISO-8859-1. This makes > the National Replacement Characters easier to see. > * modify DSR cursor-position report to check if the terminal > accounts for origin-mode. > * support --datarootdir option in makefile.in, to match > configure script updates. > * updated configure macros: > + change from byacc for autoheader > + improved checks for gcc attributes > + improved checks for gcc version > + miscellaneous fixes in CF_XOPEN_SOURCE > * update config.guess, config.sub > - vttest 20120603 > * change cursor-position before IL/DL in "Test of VT102-style > features with BCE (Insert/Delete Char/Line)" to demonstrate > whether the terminal sets the cursor to the first column as a > side-effect, as noted in VT220 reference manual. > - remove vttest-config_update_aarch64.patch since the current > vttest sports newer config version > > ==== yast2 ==== > Version update (3.1.163 -> 3.1.173) > Subpackages: yast2-devel-doc > > - bsc#960040 > - put valid hostname into AY profile generated at the end of > installation > - 3.1.173 > - Yast::Execute do not crash for missing '_' method (found during > FATE#317701) > - 3.1.172 > - fix packaging of TargetFile and Execute classes (FATE#317701) > - 3.1.171 > - fix string processing for frames in CWM causing crash in > yast2-network (bnc#963966) > - 3.1.170 > - Added Yast::Execute, a class to run programs with Cheetah > - Added Yast::TargetFile, a handler suitable for CFA::BaseModel > - Both respect Yast::Installation.destdir ( needed for FATE#317701) > - 3.1.169 > - Allow CWM to specify which events do not cause storing of widget > content ( needed for FATE#317701) > - 3.1.168 > - Added UI::InstallationDialog as specialization of UI::Dialog > (part of bsc#893825) > - 3.1.167 > - Added CWM::Tabs that is object oriented API replacement for > CWMTab > - 3.1.166 > - Add a default value for firewall setting FW_BOOT_INIT_FULL > (bsc#955400) > - 3.1.165 > - Added CWM::AbstractWidget. > - Added CWM.show method working with AbstractWidgets kids > - Added few basic CWM widgets for easier CWM.show usage > - 3.1.164 > > ==== yast2-samba-client ==== > Version update (3.1.15 -> 3.1.16) > > - Use default_ccache_name FILE:/tmp/krb5cc_%{uid}; (bnc#921530). > - 3.1.16 > > ==== yast2-storage ==== > Version update (3.1.74 -> 3.1.75) > > - Fixed expert partioner to only offer the option to enable Btrfs > snapshots for the root (/) filesystem (bsc#944252) > - Fixed expert partitioner to not forget fstab options when dealing > with Btrfs partitions (bsc#954691) > - 3.1.75 > - Simplify encrypted home proposal as installer no longer allows > network based user authentication (FATE#314695) > > ==== yast2-users ==== > Version update (3.1.41 -> 3.1.44) > > - Drop the Receive System Mail checkbox from the installation > workflow (FATE#320448) > - 3.1.44 > - Small visual improvements in the "local user" installation > dialog (bsc#893825) > - 3.1.43 > - Redesign of the installation dialogs (bsc#893825) > - 3.1.42 > > -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] updating virtual host
by jdd 14 Feb '16

14 Feb '16

Hello, It's a bit a theoretical question, because I don't manage virtual machines at the moment, but I just noticed one of my host vendor do provide several IP for cheap servers, and this may be very handy to have virtual machines (http://www.soyoustart.com/fr/offres/e3-sat-1.xml) I see theses days a lot of kernel updates. For what I know, updating kernel needs rebooting. but rebooting a *host* means switching off then on any virtual machine, ins't it? on the same time, I see some servers with uptime of one year and more. https://en.wikipedia.org/wiki/Uptime so my question: how do you manage the security of servers acting as host for, say, 10 virtual machines. any pointer to answer on the web welcome :-) thanks jdd -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 13

[opensuse-factory] Firefox builds on OBS fail
by Wolfgang Rosenauer 14 Feb '16

14 Feb '16

Hi, since Firefox 44 I have severe issues building it in OBS. Currently I'm trying to prepare 44.0.2 and it basically fails everywhere for reasons not totally clear to me. There are different build failures not always reproducible. If it's not an out of memory as below it is a very strange other error you find at the bottom: Examples: https://build.opensuse.org/build/mozilla:Factory/openSUSE_Factory/i586/Mozi… [ 1130s] [ 1115.084681] Out of memory: Kill process 23582 (cc1plus) score 146 or sacrifice child [ 1130s] [ 1115.086356] Killed process 23582 (cc1plus) total-vm:787324kB, anon-rss:205252kB, file-rss:0kB [ 1134s] {standard input}: Assembler messages: [ 1134s] {standard input}:493902: Warning: end of file not at end of a line; newline inserted [ 1134s] {standard input}:493962: Error: unbalanced parenthesis in operand 1. [ 1169s] {standard input}: Error: open CFI at the end of file; missing .cfi_endproc directive [ 1171s] c++: internal compiler error: Killed (program cc1plus) [ 1171s] Please submit a full bug report, [ 1171s] with preprocessed source if appropriate. https://build.opensuse.org/build/mozilla:Factory/openSUSE_Factory/x86_64/Mo… [ 3179s] ERROR: link target doesn't exist (neither in build root nor in installed system): [ 3179s] /usr/lib/debug/.build-id/32/872edd419c96970ed2daa4c0a4f6a04f94c0dc.debug -> /usr/lib/debug/usr/lib64/firefox/libxul.so.debug [ 3179s] Add the package providing the target to BuildRequires and Requires [ 3179s] INFO: relinking /usr/bin/firefox -> ../lib64/firefox/firefox.sh (was ../../usr/lib64/firefox/firefox.sh) [ 3179s] INFO: relinking /usr/share/pixmaps/firefox.png -> ../../lib64/firefox/browser/icons/mozicon128.png (was /usr/lib64/firefox/browser/icons/mozicon128.png) [ 3179s] INFO: relinking /usr/share/pixmaps/firefox-gnome.png -> ../../lib64/firefox/browser/icons/mozicon128.png (was /usr/lib64/firefox/browser/icons/mozicon128.png) [ 3179s] error: Bad exit status from /var/tmp/rpm-tmp.1i9Jyt (%install) [ 3179s] Retriggering builds fixes them eventually. But it's like really working 1 time out of 6 or something like this which is quite annoying. Somehow it seems related to memory usage. I could try to disable debuginfo but not sure if that is appropriate. Any other ideas? Wolfgang -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 9

[opensuse-factory] New package: sunxi-tools
by Andreas Färber 13 Feb '16

13 Feb '16

Hello, In my ongoing quest to clean up our ARM packages I have submitted the sunxi-tools package from devel:ARM:Factory:Contrib:sunxi to hardware project and am proposing its inclusion in Factory. https://build.opensuse.org/request/show/359205 Among others, its tools are used for (de)compiling Allwinner script.bin files (a predecessor/alternative to FDT files) or for booting via USB. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Kpat will not work
by C. Brouerius van Nidek 13 Feb '16

13 Feb '16

Since three or four weeks patience (kpat) won't work. The program loads at the first page where you can choose the play you want to have. The page does not respond to any mouse click. Nor at the choice at the play, nor at the toolbar. Killing kpat has to be forced. Did a reinstall of kpat without any improvement. Running kpat in konsole gave me following: kpat games.ui: KStandardGameAction::create( 22 = game_restart , KActionCollection(0x1f4ddc0, name = "KXMLGUIClient-KActionCollection") ) games.ui: KStandardGameAction::create( 2 = game_load , KActionCollection(0x1f4ddc0, name = "KXMLGUIClient-KActionCollection") ) games.ui: KStandardGameAction::create( 3 = game_load_recent , KActionCollection(0x1f4ddc0, name = "KXMLGUIClient-KActionCollection") ) games.ui: KStandardGameAction::create( 5 = game_save_as , KActionCollection(0x1f4ddc0, name = "KXMLGUIClient-KActionCollection") ) games.ui: KStandardGameAction::create( 11 = game_quit , KActionCollection(0x1f4ddc0, name = "KXMLGUIClient-KActionCollection") ) games.ui: KStandardGameAction::create( 13 = move_undo , KActionCollection(0x1f4ddc0, name = "KXMLGUIClient-KActionCollection") ) games.ui: KStandardGameAction::create( 14 = move_redo , KActionCollection(0x1f4ddc0, name = "KXMLGUIClient-KActionCollection") ) games.ui: KStandardGameAction::create( 24 = move_demo , KActionCollection(0x1f4ddc0, name = "KXMLGUIClient-KActionCollection") ) games.ui: KStandardGameAction::create( 23 = move_hint , QObject(0x0) ) games.lib: Setting theme: "Clean Green" Is there some leftover from a previous game I played or something from a update gone wrong which I could delete? Any idea how I could repair kpat? -- Linux User 183145 using KDE4 Tumbleweed on a Pentium IV , powered by openSUSE 20160209 (x86_64) Kernel: 4.4.1-4.g4dac1be-default KDE Development Platform: 4.14.16 12:42pm up 0:23, 2 users, load average: 0.12, 0.57, 1.20 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] TW LibreOffice Calc
by ellanios82 12 Feb '16

12 Feb '16

Hello List TW LibreOffice Calc : with todays TW upgrade , the calc still cannot handle formula : =SUM($E$9:E864)-SUM($J$9:J864) ............ regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 14