November 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Strange hostname behaviour
by Pierre-Amiel Giraud 15 Nov '16

15 Nov '16

Hello, I've got a problem with my hostname (I mean the one that can be seen at the default prompt or as the standard output of the "hostname" command). When I installed Tumbleweed, back in december 2015, it was the default hostname, as defined during the installation process. Strangely, in september or october, it became "minidlna". When I modify it (from Yast or from command line), it seems to work but when I reboot it is again minidlna. I have minidlna installed, but since the beginning! When I deactivate the network services, I can modify the hostname and it stays what I asked. But when I reactivate the network and then reboot, it is minidlna again. Having the minidlna activated at boot or not doesn't change anythin. Yesterday, I used a plugin of Foobar2000 (it works fine with wine) as a UPNP control point to send music to an external device… since then my hostname is foobar2000renderusernameminidlna (where username stands for my actual username). What can I do about that? It is an intended behaviour or a bug? Thank you. PA -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] TW kernel-devel and kernel-$flavor-devel are overwritten
by Andrei Borzenkov 15 Nov '16

15 Nov '16

I just did update TW from 4.7.6 to 4.8.6 and both kernel-devel and kernel-default-devel were overwritten. Both provide multiversion(kernel) and default zypp.conf enables multiversioning in this case. Is it expected? I do not have version 4.7.6 installed, so may be it lacked multiversion provides? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] xf86-input-synaptics still required in Tumbleweed?
by René Krell 15 Nov '16

15 Nov '16

Hi all, in the release notes of Leap 42.2 there has been this note: --- In Leap 42.1, the Synaptics X driver (package xf86-input-synaptics) was installed by default but had a lower priority than the libinput driver (xf86-input-libinput). Starting with Leap 42.2: - The Synaptics X driver is no longer installed by default. - If the Synaptics X driver is installed, it will take precedence for any touchpad devices. - The Synaptics X driver is no longer supported by GNOME. This means when the driver is installed, Synaptics touchpads can only be configured to the extent that a basic mouse can. --- Triggered by this comment I removed xf86-input-synaptics and gsynaptics from my Tumbleweed system and left just xf86-input-libinput. But 'zypper dup' tries to reinstall the synaptics xorg driver: --- The following 3 NEW packages are going to be installed: gsynaptics 0.9.16-27.3 gsynaptics-lang 0.9.16-27.3 xf86-input-synaptics 1.8.3-3.4 --- I it correct for TW? René -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] RFC: issue-generator integration in tumbleweed
by Thorsten Kukuk 15 Nov '16

15 Nov '16

Hi, I don't know who of you know this nice feature of CoreOS, that on the text console the fingerprint of the host ssh keys and the IP addresses are shown. Why this does not make much sense on pure desktop systems, it is quite usefull for server systems, especially if you can login only via network. I implemented something similar now for another project and wanted to ask here, if this is something which should be integrated into Tumbleweed. It is not a "plugin" package, you install it and it works, or you don't install it. If this package should be used, you need to modify the *-release packages, since this includes already a version of /etc/issue, which would overwrite the dynamic generated version with every update. If you want to give it a try or test it: The package: https://build.opensuse.org/package/show/home:kukuk/issue-generator git repo: https://github.com/thkukuk/issue-generator Before installing the RPM, create a directory /usr/lib/issue.d/ and move /etc/issue as 00-OS to /usr/lib/issue.d/ Install the package. There are three "services" generating entries in issue: /usr/lib/udev/rules.d/90-issue-generator.rules => generates the network entry /usr/lib/systemd/system/issue-add-ssh-keys.service => generates the ssh fingerprints /usr/lib/systemd/system/issue-generator.service => only generates /run/issue Comments? Thorsten -- Thorsten Kukuk, Distinguished Engineer, Senior Architect SLES & CASP SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany GF: Felix Imendoerffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161113 released!
by Dominique Leuenberger 15 Nov '16

15 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: analitza (16.08.2 -> 16.08.3) blinken (16.08.2 -> 16.08.3) bovo (16.08.2 -> 16.08.3) cervisia (16.08.2 -> 16.08.3) juk (16.08.2 -> 16.08.3) kalgebra (16.08.2 -> 16.08.3) kalzium (16.08.2 -> 16.08.3) kanagram (16.08.2 -> 16.08.3) kapptemplate (16.08.2 -> 16.08.3) katomic (16.08.2 -> 16.08.3) kblackbox (16.08.2 -> 16.08.3) kblocks (16.08.2 -> 16.08.3) kbounce (16.08.2 -> 16.08.3) kbreakout (16.08.2 -> 16.08.3) kbruch (16.08.2 -> 16.08.3) kcachegrind (16.08.2 -> 16.08.3) kcron (16.08.2 -> 16.08.3) kde-l10n (16.08.2 -> 16.08.3) kde-print-manager (16.08.2 -> 16.08.3) kdeedu-data (16.08.2 -> 16.08.3) kdesdk4-scripts (16.08.2 -> 16.08.3) kdewebdev4 (16.08.2 -> 16.08.3) kdf (16.08.2 -> 16.08.3) kdiamond (16.08.2 -> 16.08.3) kernel-source (4.8.6 -> 4.8.7) kgeography (16.08.2 -> 16.08.3) kgoldrunner (16.08.2 -> 16.08.3) khangman (16.08.2 -> 16.08.3) kig (16.08.2 -> 16.08.3) kiriki (16.08.2 -> 16.08.3) kiten (16.08.2 -> 16.08.3) kjumpingcube (16.08.2 -> 16.08.3) klettres (16.08.2 -> 16.08.3) kmahjongg (16.08.2 -> 16.08.3) kmines (16.08.2 -> 16.08.3) kmouth (16.08.2 -> 16.08.3) kmplot (16.08.2 -> 16.08.3) knavalbattle (16.08.2 -> 16.08.3) knetwalk (16.08.2 -> 16.08.3) kolf (16.08.2 -> 16.08.3) kollision (16.08.2 -> 16.08.3) kolourpaint (16.08.2 -> 16.08.3) konquest (16.08.2 -> 16.08.3) kpat (16.08.2 -> 16.08.3) kppp (16.08.2 -> 16.08.3) kremotecontrol (16.08.2 -> 16.08.3) kreversi (16.08.2 -> 16.08.3) kscd (16.08.2 -> 16.08.3) kshisen (16.08.2 -> 16.08.3) ksirk (16.08.2 -> 16.08.3) kspaceduel (16.08.2 -> 16.08.3) ksquares (16.08.2 -> 16.08.3) ksudoku (16.08.2 -> 16.08.3) ksystemlog (16.08.2 -> 16.08.3) kteatime (16.08.2 -> 16.08.3) ktimer (16.08.2 -> 16.08.3) ktouch (16.08.2 -> 16.08.3) ktuberling (16.08.2 -> 16.08.3) kturtle (16.08.2 -> 16.08.3) kubrick (16.08.2 -> 16.08.3) kwordquiz (16.08.2 -> 16.08.3) libassuan libkdegames (16.08.2 -> 16.08.3) libkeduvocdocument (16.08.2 -> 16.08.3) libkmahjongg (16.08.2 -> 16.08.3) lokalize (16.08.2 -> 16.08.3) lskat (16.08.2 -> 16.08.3) okteta (16.08.2 -> 16.08.3) openldap2 parley (16.08.2 -> 16.08.3) php5 (5.6.27 -> 5.6.28) poxml (16.08.2 -> 16.08.3) python3-pip (8.1.1 -> 9.0.1) step (16.08.1 -> 16.08.3) tar umbrello (16.08.2 -> 16.08.3) xf86-video-ati === Details === ==== analitza ==== Version update (16.08.2 -> 16.08.3) Subpackages: libAnalitza5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== blinken ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== bovo ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== cervisia ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== juk ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kalgebra ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kalzium ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kanagram ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kapptemplate ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== katomic ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kblackbox ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kblocks ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kbounce ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kbreakout ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kbruch ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kcachegrind ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kcron ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kde-l10n ==== Version update (16.08.2 -> 16.08.3) Subpackages: kde-l10n-cs kde-l10n-da kde-l10n-da-data kde-l10n-da-doc kde-l10n-de kde-l10n-de-data kde-l10n-de-doc kde-l10n-el kde-l10n-en_GB kde-l10n-en_GB-data kde-l10n-en_GB-doc kde-l10n-es kde-l10n-es-data kde-l10n-es-doc kde-l10n-fr kde-l10n-fr-data kde-l10n-hu kde-l10n-it kde-l10n-it-data kde-l10n-it-doc kde-l10n-ja kde-l10n-pl kde-l10n-pl-data kde-l10n-pt kde-l10n-pt_BR kde-l10n-pt_BR-data kde-l10n-ru kde-l10n-ru-data kde-l10n-zh_CN kde-l10n-zh_TW - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kde-print-manager ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdeedu-data ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdesdk4-scripts ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdewebdev4 ==== Version update (16.08.2 -> 16.08.3) Subpackages: kfilereplace kimagemapeditor klinkstatus - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdf ==== Version update (16.08.2 -> 16.08.3) Subpackages: kwikdisk - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdiamond ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kernel-source ==== Version update (4.8.6 -> 4.8.7) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Linux 4.8.7 (CVE-2016-7042 bnc#1006417 bnc#1008880 boo#1006825 bsc#1004517 bsc#1007653 boo#1003298 bsc#1007615). - Delete patches.drivers/0001-usbhid-add-ATEN-CS962-to-list-of-quirky-devices.patch. - Delete patches.fixes/0001-KEYS-Fix-short-sprintf-buffer-in-proc-keys-show-func.patch. - Delete patches.fixes/ALSA-seq-Fix-time-account-regression. - Delete patches.fixes/btrfs-fix-races-on-root_log_ctx-lists.patch. - Delete patches.fixes/drm-fb-helper-Dont-call-dirty-callback-for-untouched-clips. - Delete patches.fixes/drm-i915-gen9-fix-DDB-partitioning-for-multi-screen-.patch. - Delete patches.fixes/x86-smpboot-Init-apic-mapping-before-usage.patch. - commit c8f02a2 - libfc: fix seconds_since_last_reset miscalculation (boo#1008745). - commit da23b4a - drm/i915/gen9: fix DDB partitioning for multi-screen cases (bnc#1008880). - commit 4a45dd3 ==== kgeography ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kgoldrunner ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== khangman ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kig ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kiriki ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kiten ==== Version update (16.08.2 -> 16.08.3) Subpackages: fonts-KanjiStrokeOrders - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kjumpingcube ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== klettres ==== Version update (16.08.2 -> 16.08.3) - Update build requirements - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmahjongg ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmines ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmouth ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmplot ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== knavalbattle ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== knetwalk ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kolf ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kollision ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kolourpaint ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== konquest ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kpat ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kppp ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kremotecontrol ==== Version update (16.08.2 -> 16.08.3) Subpackages: liblibkremotecontrol1 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kreversi ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kscd ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kshisen ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ksirk ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kspaceduel ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ksquares ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ksudoku ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ksystemlog ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kteatime ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktimer ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktouch ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktuberling ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kturtle ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kubrick ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kwordquiz ==== Version update (16.08.2 -> 16.08.3) - Remove unneeded build requirements - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libassuan ==== Subpackages: libassuan-devel libassuan0 - qemu-disable-fdpassing-test.patch: disable fdpassing test when running under qemu-linux-user ==== libkdegames ==== Version update (16.08.2 -> 16.08.3) Subpackages: kdegames-carddecks-default libkdegames-devel libkf5kdegames6 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkeduvocdocument ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkmahjongg ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5KMahjongglib5 libkmahjongg-devel - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== lokalize ==== Version update (16.08.2 -> 16.08.3) - Remove unneeded kdelibs4support-devel build requirement - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== lskat ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== okteta ==== Version update (16.08.2 -> 16.08.3) Subpackages: okteta-devel - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== openldap2 ==== Subpackages: libldap-2_4-2 libldap-2_4-2-32bit libldap-data openldap2-client openldap2-devel - Introduce patch 0012-use-system-wide-cert-dir-by-default.patch to let OpenLDAP read system wide certificate directory by default and avoid hiding the error if user specified CA location cannot be read (bsc#1009470). ==== parley ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== php5 ==== Version update (5.6.27 -> 5.6.28) Subpackages: apache2-mod_php5 php5-bcmath php5-bz2 php5-calendar php5-ctype php5-curl php5-dba php5-devel php5-dom php5-exif php5-fastcgi php5-ftp php5-gd php5-gettext php5-gmp php5-iconv php5-imap php5-json php5-ldap php5-mbstring php5-mcrypt php5-mysql php5-odbc php5-openssl php5-pdo php5-pear php5-pear-Archive_Tar php5-pgsql php5-shmop php5-snmp php5-sockets php5-sqlite php5-suhosin php5-sysvsem php5-sysvshm php5-tidy php5-tokenizer php5-wddx php5-xmlreader php5-xmlwriter php5-xsl php5-zip php5-zlib - updated to 5.6.28: This is a security release. Several security bugs were fixed in this release. ==== poxml ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== python3-pip ==== Version update (8.1.1 -> 9.0.1) - update to version 9.0.1: * Correct the deprecation message when not specifying a --format so that it uses the correct setting name ("format") rather than the incorrect one ("list_format") (:issue:`4058`). * Fix "pip check" to check all available distributions and not just the local ones (:issue:`4083`). * Fix a crash on non ASCII characters from `lsb_release` (:issue:`4062`). * Fix an SyntaxError in an an used module of a vendored dependency (:issue:`4059`). * Fix UNC paths on Windows (:issue:`4064`). - update to version 9.0.0: * **BACKWARD INCOMPATIBLE** Remove the attempted autodetection of requirement names from URLs, URLs must include a name via "#egg=". * **DEPRECATION** "pip install --egg" have been deprecated and will be removed in the future. This "feature" has a long list of drawbacks which break nearly all of pip's other features in subtle and hard-to-diagnose ways. * **DEPRECATION** "--default-vcs" option (:issue:`4052`). * **WARNING** pip 9 cache can break forward compatibility with previous pip versions if your package repository allows chunked responses (:issue:`4078`). * Add a "pip check" command to check installed packages dependencies (:pull:`3750`). * Add option allowing user to abort pip operation if file/directory exists * Add Appveyor CI * Uninstall existing packages when performing an editable installation of the same packages (:issue:`1548`). * "pip show" is less verbose by default. "--verbose" prints multiline fields. (:pull:`3858`). * Add optional column formatting to "pip list" (:issue:`3651`). * Add "--not-required" option to "pip list", which lists packages that are not dependencies of other packages. * Fix builds on systems with symlinked "/tmp" directory for custom builds such as numpy (:pull:`3701`). * Fix regression in "pip freeze": when there is more than one git remote, priority is given to the remote named "origin" (:pull:`3708`, :issue:`3616`). * Fix crash when calling "pip freeze" with invalid requirement installed (:pull:`3704`, :issue:`3681`). * Allow multiple "--requirement" files in "pip freeze" (:pull:`3703`). * Implementation of pep-503 "data-requires-python". When this field is present for a release link, pip will ignore the download when installing to a Python version that doesn't satisfy the requirement. * "pip wheel" now works on editable packages too (it was only working on editable dependencies before); this allows running "pip wheel" on the result of "pip freeze" in presence of editable requirements (:pull:`3695`, :issue:`3291`). * Load credentials from ".netrc" files (:pull:`3715`, :issue:`3569`). * Add "--platform", "--python-version", "--implementation" and "--abi" parameters to "pip download". These allow utilities and advanced users to gather distributions for interpreters other than the one pip is being run on. (:pull:`3760`) * Skip scanning virtual environments, even when venv/bin/python is a dangling symlink. * Added "pip completion" support for the "fish" shell. * Fix problems on Windows on Python 2 when username or hostname contains non-ASCII characters (:issue:`3463`, :pull:`3970`, :pull:`4000`). * Use "git fetch --tags" to fetch tags in addition to everything else that is normally fetched; this is necessary in case a git requirement url points to a tag or commit that is not on a branch (:pull:`3791`) * Normalize package names before using in "pip show" (:issue:`3976`) * Raise when Requires-Python do not match the running version and add "--ignore-requires-python" option as escape hatch (:pull:`3846`). * Report the correct installed version when performing an upgrade in some corner cases (:issue:`2382`) * Add "-i" shorthand for "--index" flag in "pip search" * Do not optionally load C dependencies in requests (:issue:`1840`, :issue:`2930`, :issue:`3024`) * Strip authentication from SVN url prior to passing it to "svn" (:pull:`3697`, :issue:`3209`). * Also install in platlib with "--target" option (:pull:`3694`, :issue:`3682`). * Restore the ability to use inline comments in requirements files passed to "pip freeze" (:issue:`3680`). - update to version 8.1.2: * Fix a regression on systems with uninitialized locale (#3575). * Use environment markers to filter packages before determining if a required wheel is supported. Solves (#3254). * Make glibc parsing for manylinux1 support more robust for the variety of glibc versions found in the wild (#3588). * Update environment marker support to fully support PEP 508 and legacy environment markers (#3624). * Always use debug logging to the --log file (#3351). * Don't attempt to wrap search results for extremely narrow terminal windows (#3655). - specfile: * changed to https for source url * updated source url to files.pythonhosted.org ==== step ==== Version update (16.08.1 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== tar ==== - add tar-1.29-extract_pathname_bypass.patch to fix POINTYFEATHER vulnerability - GNU tar archiver can be tricked into extracting files and directories in the given destination, regardless of the path name(s) specified on the command line [bsc#1007188] [CVE-2016-6321] ==== umbrello ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== xf86-video-ati ==== - U_21-Refactor-radeon_mode_hotplug.patch U_22-Use-pRADEONEnt-to-find-both-screens-of-a-GPU-in-radeon_mode_hotplug.patch Fix enumeration of connectors per GPU (bsc#1008200). -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] new package: watchman
by Matthias Gerstner 14 Nov '16

14 Nov '16

Hello, I've written a new package filesystems/watchman which I'd like to submit into factory. watchman is a daemon that recursively watches a number of directories in the file system. It records activies in those directories and can react upon them by executing commands or delivering notifications to subscribed clients. Project website: https://facebook.github.io/watchman/ Licenses: Apache-2.0 and MIT (for 3rd party code) Devel-Package: filesystems/watchman OBS-URL: https://build.opensuse.org/package/show/filesystems/watchman It uses JSON syntax for performing more complex operations but also supports classic command line switches. A simple use case might look like this: ------------------------------------------------------------------------ # adds a new watch for the given directory # implicitly starts the watchman daemon if not yet running user@host $ watchman watch /my/sources { "version": "4.7.0", "watch": "/my/sources", "watcher": "inotify" } # creates a trigger named 'rebuild' that calls make as soon as any *.c # files change within /my/sources user@host $ watchman -- trigger /my/sources rebuild '*.c' -- make ------------------------------------------------------------------------ The daemon is designed to run as separate instances per user. It is integrated into systemd using template unit files and inetd style socket activation. Watchman is actively maintained by upstream and regular releases are made (every one to two months). Regards Matthias -- Matthias Gerstner <matthias.gerstner(a)suse.de> Dipl.-Wirtsch.-Inf. (FH), Security Engineer https://www.suse.com/security Telefon: +49 911 740 53 290 SUSE Linux GmbH GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nuernberg)

1 0

[opensuse-factory] check of release notes
by Sarah Julia Kriesch 14 Nov '16

14 Nov '16

Dear openSUSE Contributors, Our Release Day is coming. We need your help before that. Can you check the Release Note ( https://doc.opensuse.org/release-notes/x86_64/openSUSE/Leap/42.2/ ) whether all important things are listed, please? You can inform the Release Management Team about adding parts via Bugzilla and "Release Notes". Thanks for your Contributions and let's enjoy the new release! Best regards, Sarah -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] What is NM test on conncheck.opensuse.org?
by Carlos E. R. 14 Nov '16

14 Nov '16

Hi, I noticed this message on 42.2RC2: Nov 14 03:32:39 Minas-Anor NetworkManager[967]: <info> connectivity: check for uri 'http://conncheck.opensuse.org' failed with 'Could not connect: Network is unreachable' I tried the site, it doesn't load. IF NM tests that site, it should be up, and have some content. "links" says there is none. Otherwise, NM should not test for that site, and it is a bug. -- Cheers/Saludos Carlos E. R. (testing openSUSE Leap 42.2, at Minas-Anor) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 12

[opensuse-factory] Re: why PowerPC TW isos not updated in download server ?
by Dinar Valeev 14 Nov '16

14 Nov '16

On Sun, Nov 13, 2016 at 1:57 PM, Dinar Valeev <k0da(a)opensuse.org> wrote: > On 10 Nov 2016 11:15, "Andreas Schwab" <schwab(a)suse.de> wrote: >> >> On Nov 10 2016, Normand <normand(a)linux.vnet.ibm.com> wrote: >> >> > May be related to that there is one remaining ppc64 test (3) that failed >> > as not found kbd-legacy. what is us supposed to come from ? > Yes, it is. I've added ppc build, but it didn't fix the problem. I need to > look deeper. Here is the actual failure: 2016-11-12 17:19:59 <1> install(3298) [zypp++] ExternalProgram.cc(start_program):249 Executing 'rpm' '--root' '/mnt' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--noglob' '--force' '--nodeps' '--' '/mnt/var/cache/zypp/packages/openSUSE-20161112-0/suse/noarch/kbd-legacy-2.0.3-2.2.noarch.rpm' 2016-11-12 17:19:59 <1> install(3298) [zypp++] ExternalProgram.cc(start_program):412 pid 4860 launched 2016-11-12 17:19:59 <1> install(3298) [zypp++] ExternalProgram.cc(checkStatus):506 Pid 4860 exited with status 1 2016-11-12 17:19:59 <5> install(3298) [zypp] Exception.cc(log):137 RpmDb.cc(doInstallPackage):2043 THROW: Subprocess failed. Error: RPM failed: error: unpacking of archive failed on file /usr/share/kbd/keymaps/legacy/include/vim-compose.latin1: cpio: rename 2016-11-12 17:19:59 <5> install(3298) [zypp] Exception.cc(log):137 error: kbd-legacy-2.0.3-2.2.noarch: install failed >> >> osc ls -b openSUSE:Factory:PowerPC kbd >> >> Andreas. >> >> -- >> Andreas Schwab, SUSE Labs, schwab(a)suse.de >> GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 >> "And now for something completely different." -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20161112 released!
by Dominique Leuenberger 14 Nov '16

14 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: akonadi-calendar (16.08.2 -> 16.08.3) akonadi-contact (16.08.2 -> 16.08.3) akonadi-mime (16.08.2 -> 16.08.3) akonadi-notes (16.08.2 -> 16.08.3) akonadi-search (16.08.2 -> 16.08.3) akonadi-server (16.08.2 -> 16.08.3) ark (16.08.2 -> 16.08.3) autoyast2 (3.1.152 -> 3.2.0) baloo5-widgets (16.08.2 -> 16.08.3) calendarsupport (16.08.2 -> 16.08.3) dolphin (16.08.2 -> 16.08.3) dracut dragonplayer (16.08.2 -> 16.08.3) eventviews (16.08.2 -> 16.08.3) file-roller (3.22.1 -> 3.22.2) gnome-calculator (3.22.1 -> 3.22.2) gnome-disk-utility (3.22.0 -> 3.22.1) gnome-mines (3.22.1 -> 3.22.2) gnome-music (3.22.1 -> 3.22.2) gnome-shell (3.22.1 -> 3.22.2) gnome-system-monitor (3.22.0 -> 3.22.2) gpgmepp5 (16.08.2 -> 16.08.3) grantleetheme (16.08.2 -> 16.08.3) grisbi (1.0.0 -> 1.0.1) gwenview5 (16.08.2 -> 16.08.3) hwinfo (21.34 -> 21.35) incidenceeditor (16.08.2 -> 16.08.3) kaccounts-integration (16.08.2 -> 16.08.3) kaccounts-providers (16.08.2 -> 16.08.3) kalarmcal (16.08.2 -> 16.08.3) kamera (16.08.2 -> 16.08.3) kate (16.08.2 -> 16.08.3) kcalc (16.08.2 -> 16.08.3) kcalcore (16.08.2 -> 16.08.3) kcalutils (16.08.2 -> 16.08.3) kcharselect (16.08.2 -> 16.08.3) kcolorchooser (16.08.2 -> 16.08.3) kcontacts (16.08.2 -> 16.08.3) kdebase4 (16.08.2 -> 16.08.3) kdebase4-runtime (16.08.2 -> 16.08.3) kdelibs4 (4.14.25 -> 4.14.26) kdenetwork4-filesharing (16.08.2 -> 16.08.3) kdepim (16.08.2 -> 16.08.3) kdepim-addons (16.08.2 -> 16.08.3) kdepim-apps-libs (16.08.2 -> 16.08.3) kdepim-runtime (16.08.2 -> 16.08.3) kdgantt2 (16.08.2 -> 16.08.3) kdnssd (16.08.2 -> 16.08.3) kget (16.08.2 -> 16.08.3) kgpg (16.08.2 -> 16.08.3) khelpcenter5 (16.08.2 -> 16.08.3) kholidays (16.08.2 -> 16.08.3) kidentitymanagement (16.08.2 -> 16.08.3) kimap (16.08.2 -> 16.08.3) kio-extras5 (16.08.2 -> 16.08.3) kio_audiocd (16.08.2 -> 16.08.3) kldap (16.08.2 -> 16.08.3) kleopatra5 (16.08.2 -> 16.08.3) kmag (16.08.2 -> 16.08.3) kmailtransport (16.08.2 -> 16.08.3) kmbox (16.08.2 -> 16.08.3) kmime (16.08.2 -> 16.08.3) kmousetool (16.08.2 -> 16.08.3) kompare (16.08.2 -> 16.08.3) konsole (16.08.2 -> 16.08.3) kontactinterface (16.08.2 -> 16.08.3) kopete (16.08.2 -> 16.08.3) kpimtextedit (16.08.2 -> 16.08.3) kqtquickcharts (16.08.2 -> 16.08.3) krdc (16.08.2 -> 16.08.3) krfb (16.08.2 -> 16.08.3) kruler (16.08.2 -> 16.08.3) ktnef (16.08.2 -> 16.08.3) ktp-accounts-kcm (16.08.2 -> 16.08.3) ktp-approver (16.08.2 -> 16.08.3) ktp-auth-handler (16.08.2 -> 16.08.3) ktp-common-internals (16.08.2 -> 16.08.3) ktp-contact-list (16.08.2 -> 16.08.3) ktp-contact-runner (16.08.2 -> 16.08.3) ktp-desktop-applets (16.08.2 -> 16.08.3) ktp-filetransfer-handler (16.08.2 -> 16.08.3) ktp-kded-module (16.08.2 -> 16.08.3) ktp-send-file (16.08.2 -> 16.08.3) ktp-text-ui (16.08.2 -> 16.08.3) kwalletmanager5 (16.08.2 -> 16.08.3) libgravatar (16.08.2 -> 16.08.3) libkcddb4 (16.08.2 -> 16.08.3) libkcompactdisc4 (16.08.1 -> 16.08.3) libkdcraw (16.08.2 -> 16.08.3) libkdepim (16.08.2 -> 16.08.3) libkexiv2 (16.08.2 -> 16.08.3) libkface (16.08.2 -> 16.08.3) libkgeomap (16.08.2 -> 16.08.3) libkipi (16.08.2 -> 16.08.3) libkleo (16.08.2 -> 16.08.3) libkomparediff2 (16.08.2 -> 16.08.3) libksane (16.08.2 -> 16.08.3) libksieve (16.08.2 -> 16.08.3) lightsoff (3.22.0 -> 3.22.2) mailcommon (16.08.2 -> 16.08.3) mailimporter (16.08.2 -> 16.08.3) marble (16.08.2 -> 16.08.3) messagelib (16.08.2 -> 16.08.3) mobipocket (16.08.2 -> 16.08.3) mutter (3.22.1 -> 3.22.2) okular (16.08.2 -> 16.08.3) orca (3.22.1 -> 3.22.2) pimcommon (16.08.2 -> 16.08.3) signon-kwallet-extension (16.08.2 -> 16.08.3) spectacle (16.08.2 -> 16.08.3) sweeper (16.08.2 -> 16.08.3) swell-foop (3.22.0 -> 3.22.2) syndication (16.08.2 -> 16.08.3) virtualbox (5.1.6_k4.8.6_2 -> 5.1.8_k4.8.6_2) webkit2gtk3 yast2-installation (3.2.6 -> 3.2.7) yast2-trans (84.87.20161026.cec15e5 -> 84.87.20161108.95adeff) === Details === ==== akonadi-calendar ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== akonadi-contact ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5AkonadiContact5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== akonadi-mime ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5AkonadiMime5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== akonadi-notes ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== akonadi-search ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5AkonadiSearch - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== akonadi-server ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiPrivate5 libKF5AkonadiWidgets5 libKF5AkonadiXml5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ark ==== Version update (16.08.2 -> 16.08.3) Subpackages: libkerfuffle16 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== autoyast2 ==== Version update (3.1.152 -> 3.2.0) Subpackages: autoyast2-installation - Add support to enable copy-on-write for Btrfs subvolumes (FATE#320342) - Add support to omit the Btrfs default subvolume name (FATE#317775) - 3.2.0 ==== baloo5-widgets ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== calendarsupport ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5CalendarSupport5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== dolphin ==== Version update (16.08.2 -> 16.08.3) Subpackages: dolphin-part libdolphinvcs5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== dracut ==== - systemd-initrd: Add initrd-root-device.target. Cherry-pick to get systemd v230 into factory (bsc1009089) * add 0451-systemd-initrd-add-initrd-root-device.target.patch - Bash cannot handle binary strigns with embedded NULs. This used to work by accident, it no longer does starting from bash 4.4. Strip NULs during all comparison operations as a workaround. Addresses bsc989218. * add 0450-Strip-NUL-bytes-in-stream-before-push-in-string.patch - Do not create initramfs with world-readable permissions if early microcode update is used bsc#1008340 CVE-2016-8637 0503-dracut.sh-create-the-initramfs-non-world-readable-al.patch ==== dragonplayer ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== eventviews ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5EventViews5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== file-roller ==== Version update (3.22.1 -> 3.22.2) - Update to version 3.22.2: + file-roller does not respect sort order for folders (bgo#630543). + Updated translations. ==== gnome-calculator ==== Version update (3.22.1 -> 3.22.2) Subpackages: gnome-shell-search-provider-gnome-calculator - Update to version 3.22.2: + Fixed conversion unit switch. + Fixed first expression with parentheses. + Fixed possible errors on currency conversion. + Ctrl+Backspace should only delete last number. + Fixed reusing results from the history stack. ==== gnome-disk-utility ==== Version update (3.22.0 -> 3.22.1) - Update to version 3.22.1: + Updated translations. ==== gnome-mines ==== Version update (3.22.1 -> 3.22.2) - Update to version 3.22.2: + Updated translations. ==== gnome-music ==== Version update (3.22.1 -> 3.22.2) - Update to version 3.22.2: + Updated translations. ==== gnome-shell ==== Version update (3.22.1 -> 3.22.2) Subpackages: gnome-shell-browser-plugin gnome-shell-calendar - Update to version 3.22.2: + Fix OSD popup glitches (bgo#772723, bgo#772287). + Request periodic scans while WiFi list is open (bgo#767918). + Always show primary network icon when connected (bgo#773890). + Misc. bug fixes: bgo#773875, bgo#740043, bgo#773893. + Updated translations. ==== gnome-system-monitor ==== Version update (3.22.0 -> 3.22.2) - Update to version 3.22.2: + Updated translations. ==== gpgmepp5 ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5QGpgme5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== grantleetheme ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5GrantleeTheme5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== grisbi ==== Version update (1.0.0 -> 1.0.1) Subpackages: grisbi-lang - Update to version 1.0.1: + Fix major crash with gtk-2.24.30. + Fix many other bugs. + Fix many memory leaks. + Initialization of the financial year when creating a new archive. + Allow editing the 'voucher field' of the child transaction. + Homogenization of code to categories and budgetary allocations. ==== gwenview5 ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== hwinfo ==== Version update (21.34 -> 21.35) Subpackages: hwinfo-devel - ensure network devices have a bus_id (bsc#1007172) - 21.35 ==== incidenceeditor ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5IncidenceEditor5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kaccounts-integration ==== Version update (16.08.2 -> 16.08.3) Subpackages: libkaccounts1 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kaccounts-providers ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kalarmcal ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kamera ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kate ==== Version update (16.08.2 -> 16.08.3) Subpackages: kate-plugins kwrite - Remove unnecessary build requirements - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kcalc ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kcalcore ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kcalutils ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5CalendarUtils5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kcharselect ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kcolorchooser ==== Version update (16.08.2 -> 16.08.3) - Remove unused kwidgetsaddons-devel build requirement - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kcontacts ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdebase4 ==== Version update (16.08.2 -> 16.08.3) Subpackages: kdebase4-libkonq kdebase4-nsplugin kdepasswd kdialog keditbookmarks konqueror konqueror-plugins libkonq5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdebase4-runtime ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdelibs4 ==== Version update (4.14.25 -> 4.14.26) Subpackages: kdelibs4-core libkde4 libkdecore4 libksuseinstall1 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdenetwork4-filesharing ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdepim ==== Version update (16.08.2 -> 16.08.3) Subpackages: akonadi_resources akregator5 kaddressbook5 kalarm5 kmail5 knotes5 kontact5 korganizer5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdepim-addons ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdepim-apps-libs ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdepim-runtime ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdgantt2 ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5KDGantt2-5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kdnssd ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kget ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kgpg ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== khelpcenter5 ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kholidays ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kidentitymanagement ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kimap ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kio-extras5 ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kio_audiocd ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kldap ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5Ldap5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kleopatra5 ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmag ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmailtransport ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmbox ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmime ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kmousetool ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kompare ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== konsole ==== Version update (16.08.2 -> 16.08.3) Subpackages: konsole-part - Update build requirements - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kontactinterface ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kopete ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kpimtextedit ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kqtquickcharts ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== krdc ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== krfb ==== Version update (16.08.2 -> 16.08.3) - Update build requirements - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kruler ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktnef ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-accounts-kcm ==== Version update (16.08.2 -> 16.08.3) Subpackages: libktpaccountskcminternal9 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-approver ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-auth-handler ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-common-internals ==== Version update (16.08.2 -> 16.08.3) Subpackages: ktp-icons - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-contact-list ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-contact-runner ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-desktop-applets ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-filetransfer-handler ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-kded-module ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-send-file ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== ktp-text-ui ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== kwalletmanager5 ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libgravatar ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5Gravatar5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkcddb4 ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkcompactdisc4 ==== Version update (16.08.1 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkdcraw ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5KDcraw5 libkdcraw-devel - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkdepim ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5Libkdepim5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkexiv2 ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5KExiv2-15_0_0 libkexiv2-devel - Remove unnecessary (build) requirements - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkface ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5KFace10_0_0 libkface-devel - Remove unnecessary build requirements - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkgeomap ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5KGeoMap10_0_0 libkgeomap-devel - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkipi ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5Kipi31_0_0 libkipi-data libkipi-devel - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkleo ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5Libkleo5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libkomparediff2 ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libksane ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5Sane5 libksane-devel - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== libksieve ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== lightsoff ==== Version update (3.22.0 -> 3.22.2) - Update to version 3.22.2: + Updated translations. ==== mailcommon ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5MailCommon5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== mailimporter ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5MailImporter5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== marble ==== Version update (16.08.2 -> 16.08.3) Subpackages: libastro1 libmarblewidget-qt5-25 marble-devel - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== messagelib ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== mobipocket ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== mutter ==== Version update (3.22.1 -> 3.22.2) Subpackages: libmutter0 mutter-data - Update to version 3.22.2: + Really fix framebuffer capture origin offset (bgo#771502). + Fix session going into idle mode immediately on startup (bgo#772839). + Fix mirror mode with stage views (bgo#773115). + Improve pointer constraints support (bgo#771859). + Stack docks below other windows on fullscreen monitors (bgo#772937). + Fix switching between two finger- and edge scrolling on wayland (bgo#771744). + Fix popup grabs blocking screen lock on wayland (bgo#771235). + Fix various crashes on wayland (bgo#771646, bgo#771858). + Fix various placement issues on wayland (bgo#768039, bgo#771841, bgo#773141, bgo#772729). + Misc. bug fixes: bgo#771019, bgo#773116, bgo#772914, bgo#773210. + Updated translations. - Drop upstream fixed patches: + mutter-screeenshot-coords.patch + mutter-scale-positioner-coordinates.patch ==== okular ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== orca ==== Version update (3.22.1 -> 3.22.2) - Update to version 3.22.2: + Improve support for Icedove. + Work around broken accessibility trees causing flat review to fail. + Work around missing state-changed events for LibreOffice toggle buttons. + Updated translations. ==== pimcommon ==== Version update (16.08.2 -> 16.08.3) Subpackages: libKF5PimCommon5 - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== signon-kwallet-extension ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== spectacle ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== sweeper ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== swell-foop ==== Version update (3.22.0 -> 3.22.2) - Update to version 3.22.2: + Updated translations. ==== syndication ==== Version update (16.08.2 -> 16.08.3) - Update to KDE Applications 16.08.3 * KDE Applications 16.08.3 * https://www.kde.org/announcements/announce-applications-16.08.3.php ==== virtualbox ==== Version update (5.1.6_k4.8.6_2 -> 5.1.8_k4.8.6_2) Subpackages: virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 - Remove all references to libreadline. I misinterpreted a previous error message. - Fixes for VUL-0: CVE-2016-5501,CVE-2016-5538,CVE-2016-5605,CVE-2016-5608,CVE-2016-5610,CVE-2016-5611,CVE-2016-561313 boo #1005621. - Replaced libreadline6 with libreadline7. - Found and fixed another API change for kernel 4.9. In addition, the libreadline6 package is now needed. - Fix typo in "vbox_fix_4.9_api_changes.patch". - Make another 4.9 API change. - Fix build on kernel 4.9 using patch "vbox_fix_4.9_api_changes.patch". - Fixes for VUL-0: CVE-2016-5501,CVE-2016-5538,CVE-2016-5605,CVE-2016-5608,CVE-2016-5610,CVE-2016-5611,CVE-2016-561313 boo #1005621. - Add patch file "vbox_remove_smp_mflags.patch" to limit number of simultaneous make jobs. - Version bump to 5.1.8 (released 2016-10-18 by Oracle) This is a maintenance release. The following items were fixed and/or added: GUI: fixed keyboard shortcut handling regressions (Mac OS X hosts only; bugs #15937 and #15938) GUI: fixed keyboard handling regression for separate UI (Windows hosts only; bugs #15928) NAT: don't exceed the maximum number of "search" suffixes. Patch from bug #15948. NAT: fixed parsing of port-forwarding rules with a name which contains a slash (bug #16002) NAT Network: when the host has only loopback nameserver that cannot be mapped to the guests (e.g. dnsmasq running on 127.0.1.1), make DHCP supply NAT Network DNS proxy as nameserver. Bridged Network: prevent flooding syslog with packet allocation error messages (bug #15569) Audio: now using Audio Queues on Mac OS X hosts Audio: fixed recording with the PulseAudio backend (5.1 regression) Audio: various bugfixes Snapshots: fixed regression in 5.1.4 for deleting snapshots with several disks (bug #15831) Snapshots: crash fix and better error reporting when snapshot deletion failed Storage: some fixes for the NVMe emulation with Windows guests API: fixed initialization of SAS controllers (bug #15972) Build system: make it possible to build VBox on systems which default to Python 3 Windows Additions / VGA: if the guest's power management turns a virtual screen off, blank the corresponding VM window rather than hide the window Windows Additions: fixed a generic bug which could lead to freezing shared folders (bug #15662) Linux hosts / guests: fix for kernels with CONFIG_CPUMASK_OFFSTACK set (bug #16020) Linux Additions: don't require all virtual consoles be in text mode. This should fix cases when the guest is booted with a graphical boot screen (bug #15683) Linux Additions: added depmod overrides for the vboxguest and vboxsf kernel modules to fix conflicts with modules shipped by certain Linux distributions X11 Additions: disable 3D on the guest if the host does not provide enough capabilities (bug #15860) - Requesting 14000 MB is too much. Reduce the request to 12000 MB. - Some builds still run out of memory and fail. Increase to 14000 MB. - Builds keep running out of memory when building the web server part of the package. To help the memory pressure, I have forced make to run with "-j2", rather than use the number of processors. Such a change will slow the build, but will result in a higher rate of success. - Increase memory allowed in build to 10000 MB. ==== webkit2gtk3 ==== Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Do not recommend the -lang package with a version: it has close to no effect anyway, as the solver could simply ignore it to find a solution. ==== yast2-installation ==== Version update (3.2.6 -> 3.2.7) - Do not crash if importing ssh config from system which /etc/os-release does not contain pretty name (bsc#1009492) - 3.2.7 ==== yast2-trans ==== Version update (84.87.20161026.cec15e5 -> 84.87.20161108.95adeff) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-en_US yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20161108.95adeff: * Translated using Weblate (Arabic) * Translated using Weblate (German) * Translated using Weblate (Indonesian) * Translated using Weblate (Japanese) * Translated using Weblate (Russian) * Translated using Weblate (Swedish) - Update to version 84.87.20161107.51657f4: * New POT for text domain 'add-on'. * New POT for text domain 'autoinst'. * New POT for text domain 'base'. * New POT for text domain 'bootloader'. * New POT for text domain 'control'. * New POT for text domain 'country'. * New POT for text domain 'fonts'. * New POT for text domain 'ftp-server'. * New POT for text domain 'gtk'. * New POT for text domain 'gtk-pkg'. * New POT for text domain 'http-server'. * New POT for text domain 'installation'. * New POT for text domain 'kdump'. * New POT for text domain 'network'. * New POT for text domain 'registration'. * New POT for text domain 'storage'. * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Czech) * Translated using Weblate (Danish) * Translated using Weblate (Dutch) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Greek) * Translated using Weblate (Indonesian) * Translated using Weblate (Japanese) * Translated using Weblate (Lithuanian) * Translated using Weblate (Persian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Ukrainian) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] openSUSE Leap 42.2 GM done
by Ludwig Nussel 14 Nov '16

14 Nov '16

Hi, openSUSE Leap 42.2 is build disabled now. The final images have been built. To get them please hold out until the official release on Wednesday to let the mirrors warm up. Important fixes need to be submitted via the update project now. If anything needs to be fixed urgently to be available at the release day, please - talk to maintenance (Bugzilla NEEDINFO maintenance(a)opensuse.org) - thoroughly test your changes! Thanks everyone for your contributions and hard work to make 42.2 a great release! cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.com/ SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 13

[opensuse-factory] BTRFS info (device dm-0): forced readonly
by Achim Gratz 13 Nov '16

13 Nov '16

Filed as: https://bugzilla.opensuse.org/show_bug.cgi?id=1009339 After the Tumbleweed update yesterday I've run the btrfs balance script. Halfway thru it set the filesystem read-only. I've rebooted, it rebuild some free extent cache that it said was missing, created a new journal and I could then finish the rebalance. Today the filesystem has again hit some problem: [ 550.910590] ------------[ cut here ]------------ [ 550.910644] WARNING: CPU: 2 PID: 524 at ../fs/btrfs/extent-tree.c:6945 __btrfs_free_extent.isra.70+0x7f8/0xcc0 [btrfs] [ 550.910646] Modules linked in: fuse ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT nf_reject_ipv4 xt_tcpudp xt_pkttype xt_ph ysdev br_netfilter nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 n f_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables af_packet bridge stp llc iscsi_ibft iscsi_boot_sysfs msr nls_iso8859_1 nls_cp437 vfat xfs libcrc32c fat snd_hda_codec_realtek snd_hda_codec_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_emu10k1 snd_util_mem snd_rawmidi kvm_intel kvm snd_seq_d evice snd_ac97_codec irqbypass crct10dif_pclmul crc32_pclmul snd_hda_intel ghash_clmulni_intel snd_hda_codec [ 550.910718] aesni_intel snd_hda_core snd_hwdep pl2303 snd_pcm usbserial aes_x86_64 mei_wdt lrw iTCO_wdt i2c_i801 glue_helper iTCO_vendor_support dcdbas emu10k1_gp ablk_help er cryptd i2c_smbus pcspkr gameport ac97_bus snd_timer battery snd thermal ie31200_edac e1000e fjes tpm_tis soundcore mei_me lpc_ich tpm_tis_core ptp mei tpm pps_core edac_core shpchp mfd_core btrfs xor zlib_deflate raid6_pq crc32c_intel serio_raw sr_mod cdrom ehci_pci ehci_hcd i915 i2c_algo_bit drm_kms_helper syscopyarea xhci_pci sysfillrect sysimgb lt fb_sys_fops xhci_hcd usbcore drm usb_common button video dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua efivarfs [ 550.910805] CPU: 2 PID: 524 Comm: btrfs-transacti Not tainted 4.8.6-2-default #1 [ 550.910807] Hardware name: Dell Inc. PowerEdge T20/0VD5HY, BIOS A06 01/27/2015 [ 550.910810] 0000000000000000 ffffffff833a4272 0000000000000000 0000000000000000 [ 550.910817] ffffffff8307de2e 000000948ea83000 00000000fffffffe ffff8b124d565640 [ 550.910822] ffff8b1312be2000 0000000000000000 ffff8b12893d9ee0 ffffffffc072d628 [ 550.910828] Call Trace: [ 550.910853] [<ffffffff8302eefe>] dump_trace+0x5e/0x310 [ 550.910863] [<ffffffff8302f2cb>] show_stack_log_lvl+0x11b/0x1a0 [ 550.910871] [<ffffffff83030001>] show_stack+0x21/0x40 [ 550.910880] [<ffffffff833a4272>] dump_stack+0x5c/0x7a [ 550.910889] [<ffffffff8307de2e>] __warn+0xbe/0xe0 [ 550.910927] [<ffffffffc072d628>] __btrfs_free_extent.isra.70+0x7f8/0xcc0 [btrfs] [ 550.910970] [<ffffffffc073173f>] __btrfs_run_delayed_refs+0x56f/0x12f0 [btrfs] [ 550.911006] [<ffffffffc073544a>] btrfs_run_delayed_refs+0x9a/0x2a0 [btrfs] [ 550.911047] [<ffffffffc074b3b0>] btrfs_commit_transaction+0x40/0xa80 [btrfs] [ 550.911087] [<ffffffffc07462c2>] transaction_kthread+0x1c2/0x1f0 [btrfs] [ 550.911097] [<ffffffff8309c5ed>] kthread+0xbd/0xe0 [ 550.911106] [<ffffffff836d461f>] ret_from_fork+0x1f/0x40 [ 550.915472] DWARF2 unwinder stuck at ret_from_fork+0x1f/0x40 [ 550.915475] Leftover inexact backtrace: … [ 550.916354] BTRFS error (device dm-0): unable to find ref byte nr 638048546816 parent 0 root 282 owner 30689 offset 0 [ 550.916360] ------------[ cut here ]------------ [ 550.916391] WARNING: CPU: 2 PID: 524 at ../fs/btrfs/extent-tree.c:6951 __btrfs_free_extent.isra.70+0x9ca/0xcc0 [btrfs] [ 550.916393] BTRFS: Transaction aborted (error -2) … [ 550.921107] ---[ end trace 3a5d969e50f23ffa ]--- [ 550.921111] BTRFS: error (device dm-0) in __btrfs_free_extent:6951: errno=-2 No such entry [ 550.921115] BTRFS info (device dm-0): forced readonly [ 550.921119] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2960: errno=-2 No such entry [ 550.921141] systemd-journald[586]: Failed to truncate file to its own size: Read-only file system [ 550.921219] systemd-journald[586]: Failed to truncate file to its own size: Read-only file system [ 550.921285] systemd-journald[586]: Failed to truncate file to its own size: Read-only file system [ 550.921341] systemd-journald[586]: Failed to truncate file to its own size: Read-only file system [ 550.921350] pending csums is 8192 Is there something I can do besides another reboot? Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Waldorf MIDI Implementation & additional documentation: http://Synth.Stromeko.net/Downloads.html#WaldorfDocs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] Leap 42.2 RC2 says internal ruby error on install
by Carlos E. R. 13 Nov '16

13 Nov '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I was attempting to install RC2 on my laptop test partition. I did the partition setup, advanced to next step. Phase "analyzing your system". Can't reach the point to display the proposal. Popup - I have a photo, will post on request; meanwhile, hand copied here: YaST2 Error Internal error. Please report a bug report with logs. Details: Unknown udev device /dev/disk/by-label/msdos. Caller: /usr/share/YaST2/lib/bootloader/udev_mapping.rb:33:in `to_kernel_device` Start the Ruby debugger now and debug the issue? (Experts only)!) [Yes] No Instructions? I have the laptop stopped at that point and waiting. Logs? It is a ramdisk. Not that simple, but I can try if I can mount a partition. I suppose you want the /var/log/ - wait, it would be systemd journal? Or YaST logs? What logs exactly do you want? Only the install ramdisk is available for commands. As far as I know, I do not have any partition labeled "msdos" nor did I request to mount one by that name. I'm attempting to install on a ~/GB partition a minimal install. Usually I go with XFS (currently it has installed a 42.1 factory release), but this time I said: XFS, to try. I'm waiting for your instructions, at least till 16 UTC, then I'll have dificulties to keep laptop connected. Will see. - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlgj0gcACgkQtTMYHG2NR9VsTgCfcPPqp//Bl2+eSKXsRGIUA1iA kA0An2tEhxH89AbU+X8pO3jCHega6OpZ =8Py0 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 6

[opensuse-factory] systemd-networkd does not honor ipv6 privacy ext
by Carlos Hernandez 13 Nov '16

13 Nov '16

Hi, Just noticed that factory's version of systemd version 228 which has a bug relating to ipv6 privacy extensions. The issue has been resolved in upstream. I was wondering if perhaps the version in factory should be patch to resolve the issue. https://github.com/systemd/systemd/issues/2242 -- Best Regards, Carlos Hernandez 4096R / 2CDA 09D6 3EE3 2885 623B 1268 9864 FE7A 97C3 D526 https://sks-keyservers.net/pks/lookup?op=vindex&search=0x9864FE7A97C3D526

2 1

[opensuse-factory] getting copies of bounce-errors?
by L. A. Walsh 12 Nov '16

12 Nov '16

Got two notes (at end) indicating 3 messages that bounced. What I'd like to know is "why" they bounced and/or where the bounce occurred. Is it possible to get a copy of the "bounce" message and/or any mail errors that were listed that indicate a bounce? I'm trying to find out how or why occasional messages bounce -- one irate list owner claimed I was rejecting all their email as spam (which I don't, but if it was rejected before it ever got to me... I wouldn't know). However when I asked for a copy, they claimed I was being "aggressive" and refused to send me a copy. (?!?) Anyway, I tried sending email to the list-admin address a few days ago, but got no response, and wondered if anyone here might know how to get copies of the _bounce messages_ (not so much needing the original messages, as they won't tell me where in my email-chain the bounce occurred). Thanks much! -linda -------- Original Message -------- Subject: Bouncing messages from opensuse-factory(a)opensuse.org Date: Thu, 10 Nov 2016 00:00:02 +0000 Hi, this is the Mlmmj program managing the <opensuse-factory(a)opensuse.org> mailing list. Some messages to you could not be delivered. If you're seeing this message it means things are back to normal, and it's merely for your information. Here is the list of the bounced messages: - 72213 - 72215 Here is the list of the bounced messages: - 72285 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7

[opensuse-factory] wifi problems from suspend to ram
by Daniele Granata 12 Nov '16

12 Nov '16

Hi all, anyone is suffering the loss of network on resume from suspend to ram? Networkmanager app in kde becomes red and seems impossible to get wifi working again causing me to reboot the machine. Ciao -- Daniele -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] New Tumbleweed snapshot 20161111 released!
by Dominique Leuenberger 12 Nov '16

12 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: boost guile hwinfo (21.32 -> 21.34) installation-images-openSUSE (14.275 -> 14.277) java-1_8_0-openjdk (1.8.0.101 -> 1.8.0.111) libvirt-python (2.3.0 -> 2.4.0) mutter pciutils-ids (20160918 -> 20161029) perl-XML-XPath (1.37 -> 1.38) quilt (0.64 -> 0.65) yast2-core (3.1.24 -> 3.2.0) zypper (1.13.12 -> 1.13.13) === Details === ==== boost ==== Subpackages: boost-license1_62_0 boost_1_62-devel boost_1_62-jam libboost_atomic1_62_0 libboost_chrono1_62_0 libboost_container1_62_0 libboost_context1_62_0 libboost_coroutine1_62_0 libboost_date_time1_62_0 libboost_fiber1_62_0 libboost_filesystem1_62_0 libboost_graph1_62_0 libboost_graph_parallel1_62_0 libboost_iostreams1_62_0 libboost_locale1_62_0 libboost_log1_62_0 libboost_math1_62_0 libboost_mpi1_62_0 libboost_program_options1_62_0 libboost_python1_62_0 libboost_python3-1_62_0 libboost_random1_62_0 libboost_regex1_62_0 libboost_serialization1_62_0 libboost_signals1_62_0 libboost_system1_62_0 libboost_test1_62_0 libboost_thread1_62_0 libboost_timer1_62_0 libboost_wave1_62_0 - Revert upstream change that set default python version and ignored user configuration. python-2059618.patch (boo#1006584) - Rectify groups and description ==== guile ==== Subpackages: guile-modules-2_0 libguile-2_0-22 - repl-server-test.patch: fix race in 00-repl-server.test ==== hwinfo ==== Version update (21.32 -> 21.34) Subpackages: hwinfo-devel - update usb ids - update script to parse usb id list correctly - update pci ids (bsc#1006818) - 21.34 - implement nvdimm support (bsc#970111) - 21.33 ==== installation-images-openSUSE ==== Version update (14.275 -> 14.277) - fix last module config change - stick to grub default colors (bsc#1005899) - 14.277 - update module.config to match 4.9 - Correct susehmc.ins to have full paths to the files in boot/s390x/ - Corrected the line to install parmfile.hmc - Added susehmc.ins and parmfile.hmc files to allow installation from the DVD reader in the HMC without a network connection. (bsc#1002974) - 14.276 ==== java-1_8_0-openjdk ==== Version update (1.8.0.101 -> 1.8.0.111) Subpackages: java-1_8_0-openjdk-devel java-1_8_0-openjdk-headless - Upgrade to version jdk8u111 (icedtea 3.2.0) * Security fixes + S8146490: Direct indirect CRL checks + S8151921: Improved page resolution + S8155968: Update command line options + S8155973, CVE-2016-5542: Tighten jar checks (bsc#1005522) + S8156794: Extend data sharing + S8157176: Improved classfile parsing + S8157739, CVE-2016-5554: Classloader Consistency Checking (bsc#1005523) + S8157749: Improve handling of DNS error replies + S8157753: Audio replay enhancement + S8157759: LCMS Transform Sampling Enhancement + S8157764: Better handling of interpolation plugins + S8158302: Handle contextual glyph substitutions + S8158993, CVE-2016-5568: Service Menu services (bsc#1005525) + S8159495: Fix index offsets + S8159503: Amend Annotation Actions + S8159511: Stack map validation + S8159515: Improve indy validation + S8159519, CVE-2016-5573: Reformat JDWP messages (bsc#1005526) + S8160090: Better signature handling in pack200 + S8160094: Improve pack200 layout + S8160098: Clean up color profiles + S8160591, CVE-2016-5582: Improve internal array handling (bsc#1005527) + S8160838, CVE-2016-5597: Better HTTP service (bsc#1005528) + PR3206, RH1367357: lcms2: Out-of-bounds read in Type_MLU_Read() + CVE-2016-5556 (bsc#1005524) * New features + PR1370: Provide option to build without debugging + PR1375: Provide option to strip and link debugging info after build + PR1537: Handle alternative Kerberos credential cache locations + PR1978: Allow use of system PCSC + PR2445: Support system libsctp + PR3182: Support building without pre-compiled headers + PR3183: Support Fedora/RHEL system crypto policy + PR3221: Use pkgconfig to detect Kerberos CFLAGS and libraries * Import of OpenJDK 8 u102 build 14 + S4515292: ReferenceType.isStatic() returns true for arrays + S4858370: JDWP: Memory Leak: GlobalRefs never deleted when processing invokeMethod command + S6976636: JVM/TI test ex03t001 fails assertion + S7185591: jcmd-big-script.sh ERROR: could not find app's Java pid. + S8017462: G1: guarantee fails with UseDynamicNumberOfGCThreads + S8034168: ThreadMXBean/Locks.java failed, blocked on wrong object + S8036006: [TESTBUG] sun/tools/native2ascii/NativeErrors.java fails: Process exit code was 0, but error was expected. + S8041781: Need new regression tests for PBE keys + S8041787: Need new regressions tests for buffer handling for PBE algorithms + S8043836: Need new tests for AES cipher + S8044199: Tests for RSA keys and key specifications + S8044772: TempDirTest.java still times out with -Xcomp + S8046339: sun.rmi.transport.DGCAckHandler leaks memory + S8047031: Add SocketPermission tests for legacy socket types + S8048052: Permission tests for setFactory + S8048138: Tests for JAAS callbacks + S8048147: Privilege tests with JAAS Subject.doAs + S8048356: SecureRandom default provider tests + S8048357: PKCS basic tests + S8048360: Test signed jar files + S8048362: Tests for doPrivileged with accomplice + S8048596: Tests for AEAD ciphers + S8048599: Tests for key wrap and unwrap operations + S8048603: Additional tests for MAC algorithms + S8048604: Tests for strong crypto ciphers + S8048607: Test key generation of DES and DESEDE + S8048610: Implement regression test for bug fix of 4686632 in JCE + S8048617: Tests for PKCS12 read operations + S8048618: Tests for PKCS12 write operations. + S8048619: Implement tests for converting PKCS12 keystores + S8048624: Tests for SealedObject + S8048819: Implement reliability test for DH algorithm + S8048820: Implement tests for SecretKeyFactory + S8048830: Implement tests for new functionality provided in JEP 166 + S8049237: Need new tests for X509V3 certificates + S8049321: Support SHA256WithDSA in JSSE + S8049429: Tests for java client server communications with various TLS/SSL combinations. + S8049432: New tests for TLS property jdk.tls.client.protocols + S8049814: Additional SASL client-server tests + S8050281: New permission tests for JEP 140 + S8050370: Need new regressions tests for messageDigest with DigestIOStream + S8050371: More MessageDigest tests + S8050374: More Signature tests + S8050427: LoginContext tests to cover JDK-4703361 + S8050460: JAAS login/logout tests with LoginContext + S8050461: Tests for syntax checking of JAAS configuration file + S8054278: Refactor jps utility tests + S8055530: assert(_exits.control()->is_top() || !_gvn.type(ret_phi)->empty()) failed: return value must be well defined + S8055844: [TESTBUG] test/runtime/NMT/VirtualAllocCommitUncommitRecommit.java fails on Solaris Sparc due to incorrect page size being used + S8059677: Thread.getName() instantiates Strings + S8061464: A typo in CipherTestUtils test + S8062536: [TESTBUG] Conflicting GC combinations in jdk tests + S8065076: java/net/SocketPermission/SocketPermissionTest.java fails intermittently + S8065078: NetworkInterface.getNetworkInterfaces() triggers intermittent test failures + S8066871: java.lang.VerifyError: Bad local variable type - local final String + S8068427: Hashtable deserialization reconstitutes table with wrong capacity + S8069038: javax/net/ssl/TLS/TLSClientPropertyTest.java needs to be updated for JDK-8061210 + S8069253: javax/net/ssl/TLS/TestJSSE.java failed on Mac + S8071125: Improve exception messages in URLPermission + S8072081: Supplementary characters are rejected in comments + S8072463: Remove requirement that AKID and SKID have to match when building certificate chain + S8072725: Provide more granular levels for GC verification + S8073400: Some Monospaced logical fonts have a different width + S8073872: Schemagen fails with StackOverflowError if element references containing class + S8074931: Additional tests for CertPath API + S8075286: Additional tests for signature algorithm OIDs and transformation string + S8076486: [TESTBUG] javax/security/auth/Subject/doAs/NestedActions.java fails if extra VM options are given + S8076545: Text size is twice bigger under Windows L&F on Win 8.1 with HiDPI display + S8076995: gc/ergonomics/TestDynamicNumberOfGCThreads.java failed with java.lang.RuntimeException: 'new_active_workers' missing from stdout/stderr + S8079138: Additional negative tests for XML signature processing + S8081512: Remove sun.invoke.anon classes, or move / co-locate them with tests + S8081771: ProcessTool.createJavaProcessBuilder() needs new addTestVmAndJavaOptions argument + S8129419: heapDumper.cpp: assert(length_in_bytes > 0) failed: nothing to copy + S8130150: Implement BigInteger.montgomeryMultiply intrinsic + S8130242: DataFlavorComparator transitivity exception + S8130304: Inference: NodeNotFoundException thrown with deep generic method call chain + S8130425: libjvm crash due to stack overflow in executables with 32k tbss/tdata + S8133023: ParallelGCThreads is not calculated correctly + S8134111: Unmarshaller unmarshalls XML element which doesn't have the expected namespace + S8135259: InetAddress.getAllByName only reports "unknown error" instead of actual cause + S8136506: Include sun.arch.data.model as a property that can be queried by jtreg + S8137068: Tests added in JDK-8048604 fail to compile + S8139040: Fix initializations before ShouldNotReachHere() etc. and enable -Wuninitialized on linux. + S8139581: AWT components are not drawn after removal and addition to a container + S8141243: Unexpected timezone returned after parsing a date + S8141420: Compiler runtime entries don't hold Klass* from being GCed + S8141445: Use of Solaris/SPARC M7 libadimalloc.so can generate unknown signal in hs_err file + S8141551: C2 can not handle returns with inccompatible interface arrays + S8143377: Test PKCS8Test.java fails + S8143647: Javac compiles method reference that allows results in an IllegalAccessError + S8144144: ORB destroy() leaks filedescriptors after unsuccessful connection + S8144593: Suppress not recognized property/feature warning messages from SAXParser + S8144957: Remove PICL warning message + S8145039: JAXB marshaller fails with ClassCastException on classes generated by xjc + S8145228: Java Access Bridge, getAccessibleStatesStringFromContext doesn't wrap the call to getAccessibleRole + S8145388: URLConnection.guessContentTypeFromStream returns image/jpg for some JPEG images + S8145974: XMLStreamWriter produces invalid XML for surrogate pairs on OutputStreamWriter + S8146035: Windows - With LCD antialiasing, some glyphs are not rendered correctly + S8146192: Add test for JDK-8049321 + S8146274: Thread spinning on WeakHashMap.getEntry() with concurrent use of nashorn + S8147468: Allow users to bound the size of buffers cached in the per-thread buffer caches + S8147645: get_ctrl_no_update() code is wrong + S8147807: crash in libkcms.so on linux-sparc + S8148379: jdk.nashorn.api.scripting spec. adjustments, clarifications + S8148627: RestrictTestMaxCachedBufferSize.java to 64-bit platforms + S8148820: Missing @since Javadoc tag in Logger.log(Level, Supplier) + S8148926: Call site profiling fails on braces-wrapped anonymous function + S8149017: Delayed provider selection broken in RSA client key exchange + S8149029: Secure validation of XML based digital signature always enabled when checking wrapping attacks + S8149330: Capacity of StringBuilder should not get close to Integer.MAX_VALUE unless necessary + S8149334: JSON.parse(JSON.stringify([])).push(10) creates an array containing two elements + S8149368: [hidpi] JLabel font is twice bigger than JTextArea font on Windows 7,HiDPI, Windows L&F + S8149411: PKCS12KeyStore cannot extract AES Secret Keys + S8149417: Use final restricted flag + S8149450: LdapCtx.processReturnCode() throwing Null Pointer Exception + S8149453: [hidpi] JFileChooser does not scale properly on Windows with HiDPI display and Windows L&F + S8149543: range check CastII nodes should not be split through Phi + S8149743: JVM crash after debugger hotswap with lambdas + S8149744: fix testng.jar delivery in Nashorn build.xml + S8149915: enabling validate-annotations feature for xsd schema with annotation causes NPE + S8150002: Check for the validity of oop before printing it in verify_remembered_set + S8150470: JCK: api/xsl/conf/copy/copy19 test failure + S8150518: G1 GC crashes at G1CollectedHeap::do_collection_pause_at_safepoint(double) + S8150533: Test java/util/logging/LogManagerAppContextDeadlock.java times out intermittently. + S8150704: XALAN: ERROR: 'No more DTM IDs are available' when transforming with lots of temporary result trees + S8150780: Repeated offer and remove on ConcurrentLinkedQueue lead to an OutOfMemoryError + S8151064: com/sun/jdi/RedefineAddPrivateMethod.sh fails intermittently + S8151197: [TEST_BUG] Need to backport fix for test/javax/net/ssl/TLS/TestJSSE.java + S8151352: jdk/test/sample fails with "effective library path is outside the test suite" + S8151431: DateFormatSymbols triggers this.clone() in the constructor + S8151535: TESTBUG: java/lang/invoke/AccessControlTest.java should be modified to run with JTREG 4.1 b13 + S8151731: Add new jtreg keywords to jdk 8 + S8151998: VS2010 ThemeReader.cpp(758) : error C3861: 'round': identifier not found + S8152927: Incorrect GPL header in StubFactoryDynamicBase.java reported + S8153252: SA: Hotspot build on Windows fails if make/closed folder does not exist + S8153531: Improve exception messaging for RSAClientKeyExchange + S8153641: assert(thread_state == _thread_in_native) failed: Assumed thread_in_native while heap dump + S8153673: [BACKOUT] JDWP: Memory Leak: GlobalRefs never deleted when processing invokeMethod command + S8154304: NullpointerException at LdapReferralException.getReferralContext + S8154722: Test gc/ergonomics/TestDynamicNumberOfGCThreads.java fails + S8157078: 8u102 L10n resource file updates + S8157838: Personalized Windows Font Size is not taken into account in Java8u102 * Import of OpenJDK 8 u111 build 14 + S6882559: new JEditorPane("text/plain","") fails for null context class loader + S8049171: Additional tests for jarsigner's warnings + S8063086: Math.pow yields different results upon repeated calls + S8140530: Creating a VolatileImage with size 0,0 results in no longer working g2d.drawString + S8142926: OutputAnalyzer's shouldXXX() calls return this + S8147077: IllegalArgumentException thrown by api/java_awt/Component/FlipBufferStrategy/indexTGF_General + S8148127: IllegalArgumentException thrown by JCK test api/java_awt/Component/FlipBufferStrategy/indexTGF_General in opengl pipeline + S8150611: Security problem on sun.misc.resources.Messages* + S8153399: Constrain AppCDS behavior (back port) + S8157653: [Parfait] Uninitialised variable in awt_Font.cpp + S8158734: JEditorPane.createEditorKitForContentType throws NPE after 6882559 + S8158994: Service Menu services + S8159684: (tz) Support tzdata2016f + S8160904: Typo in code from 8079718 fix : enableCustomValueHanlde + S8160934: isnan() is not available on older MSVC compilers + S8161141: correct bugId for JDK-8158994 fix push + S8162411: Service Menu services 2 + S8162419: closed/com/oracle/jfr/runtime/TestVMInfoEvent.sh failing after JDK-8155968 + S8162511: 8u111 L10n resource file updates + S8162792: Remove constraint DSA keySize < 1024 from jdk.jar.disabledAlgorithms in jdk8 + S8164452: 8u111 L10n resource file update - msgdrop 20 + S8165816: jarsigner -verify shows jar unsigned if it was signed with a weak algorithm + S8166381: Back out changes to the java.security file to not disable MD5 * Backports + S8078628, PR3208: Zero build fails with pre-compiled headers disabled + S8141491, PR3159, G592292: Unaligned memory access in Bits.c + S8157306, PR3121: Random infrequent null pointer exceptions in javac (enabled on AArch64 only) + S8162384, PR3122: Performance regression: bimorphic inlining may be bypassed by type speculation * Bug fixes + PR3123: Some object files built without -fPIC on x86 only + PR3126: pax-mark-vm script calls "exit -1" which is invalid in dash + PR3127, G590348: Only apply PaX markings by default on running PaX kernels + PR3199: Invalid nashorn URL + PR3201: Update infinality configure test + PR3218: PR3159 leads to build failure on clean tree * AArch64 port + S8131779, PR3220: AARCH64: add Montgomery multiply intrinsic + S8167200, PR3220: AArch64: Broken stack pointer adjustment in interpreter + S8167421, PR3220: AArch64: in one core system, fatal error: Illegal threadstate encountered + S8167595, PR3220: AArch64: SEGV in stub code cipherBlockChaining_decryptAESCrypt + S8168888, PR3220: Port 8160591: Improve internal array handling to AArch64. * Shenandoah + PR3224: Shenandoah broken when building without pre-compiled headers - Modified patch: * java-1_8_0-openjdk-gcc6.patch + rediff to a changed context - Build against system kerberos for openSUSE 13.1 and greater and SLE12 - Build against system pcsc and sctp for openSUSE 13.2 and greater and SLE12 ==== libvirt-python ==== Version update (2.3.0 -> 2.4.0) - Update to 2.4.0 - Add all new APIs and constants in libvirt 2.4.0 ==== mutter ==== Subpackages: libmutter0 mutter-data - Update descriptions ==== pciutils-ids ==== Version update (20160918 -> 20161029) - Update to 20161029 ==== perl-XML-XPath ==== Version update (1.37 -> 1.38) - updated to 1.38 see /usr/share/doc/packages/perl-XML-XPath/Changes 1.38 2016-10-31 MANWAR - Fixed parser caching as reported by Jeremy (mysticprune). ==== quilt ==== Version update (0.64 -> 0.65) - Update to version 0.65: * Project settings have priority * Fix a race condition in diff_file * Performance: Optimizations to the setup command * Performance: Optimizations to the bash completion script * Test suite: Improve the edit test case * Test suite: Test backup failure * Test suite: Test the header command with hard links * diff: Report diff failures * mail: Fix the help text * push: Fix the synopsis * refresh: Do not remove symlinks * refresh: Break links to read-only patch files * refresh: Always preserve modification time * setup: Report failed look-ups in inspect-wrapper * quilt.el: Fix quilt-editable when patches are stored in subdirs * bash_completion: Handle spaces in file names * bash_completion: Update the list of commands * bash_completion: Add new command options * bash_completion: Fix handling of mail, new, push options * guards: Simplify the help text * guards: Include the file name also in the "Not found" case * guards: Add support for an external filelist in --check mode * guards: Report which config file has problem in --check mode * guards: Documentation update * guards: Clarify a user message * Obsoletes edit-01-test-file-creation.patch * Obsoletes edit-02-call-remove-not-revert.patch * Obsoletes edit-03-fix-corner-case.patch * Obsoletes translation-fixes-01.patch * Obsoletes translation-fixes-02.patch * Obsoletes translation-fixes-03.patch * Obsoletes translation-fixes-04.patch * Obsoletes reject-binary-files-in-patches.patch - Pass --sysconfdir to configure so that the configuration files are installed in the right place. - Update package description. - Refresh suse-workaround-pseudo-release.patch ==== yast2-core ==== Version update (3.1.24 -> 3.2.0) - ag_anyangent: Do not fail the parse when an Optional syntax meets EOF, e.g. for a fstab without a trailing newline (bsc#429326#c11) - 3.2.0 ==== zypper ==== Version update (1.13.12 -> 1.13.13) Subpackages: zypper-aptitude zypper-log - lr: show repo priority summary - Fix german translations (bsc#975777, bsc#975794) - Do not warn about processes using deleted files when using --root (bsc#731333) - version 1.13.13 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] brp-check-suse maintainer
by Aleksa Sarai 12 Nov '16

12 Nov '16

Hello, I'm not sure who the maintainer is for brp-check-suse[1], but I'd just like to ping whoever that is that I've made a PR against the repo[2] which fixes some Golang packaging issues we've had recently. Also, does anyone know how long it will take to get the fix into the actual OBS instance? We've included a workaround in devel:languages:go, but it increased the package size by 4x (which is quite unfortunate). [1]: https://github.com/openSUSE/brp-check-suse [2]: https://github.com/openSUSE/brp-check-suse/pull/7 -- Aleksa Sarai Software Engineer (Containers) SUSE Linux GmbH https://www.cyphar.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161110 released!
by Dominique Leuenberger 11 Nov '16

11 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: Mesa NetworkManager-applet appstream-glib (0.6.4 -> 0.6.5) baobab (3.22.0 -> 3.22.1) digikam (5.2.0 -> 5.3.0) dolphin evolution (3.22.1 -> 3.22.2) evolution-data-server (3.22.1 -> 3.22.2) evolution-ews (3.22.1 -> 3.22.2) freeipmi (1.5.4 -> 1.5.5) glib2 (2.50.1 -> 2.50.2) gnome-color-manager (3.22.1 -> 3.22.2) gnome-desktop (3.22.1 -> 3.22.2) gnome-maps (3.22.1 -> 3.22.2) gnome-online-accounts (3.22.1 -> 3.22.2) gnome-photos (3.22.1 -> 3.22.2) gnome-power-manager (3.22.1 -> 3.22.2) gnome-session (3.22.1 -> 3.22.2) gnome-software (3.22.1 -> 3.22.2) gnome-terminal (3.22.0 -> 3.22.1) gspell (1.2.0 -> 1.2.1) gtk3 (3.22.2 -> 3.22.3) gtksourceview (3.22.0 -> 3.22.1) gvfs (1.30.1.1 -> 1.30.2) khotkeys5 kinfocenter5 kmenuedit5 kscreen5 ksysguard5 ksystemlog kwin5 libkscreen2 libpst (0.6.68 -> 0.6.69) libvirt (2.3.0 -> 2.4.0) oxygen5 perl-Devel-GlobalDestruction (0.13 -> 0.14) perl-Sub-Exporter-Progressive (0.001012 -> 0.001013) plasma5-addons plasma5-desktop plasma5-integration plasma5-openSUSE plasma5-workspace powerdevil5 python-python-dateutil (2.4.2 -> 2.6.0) python3-python-dateutil (2.5.3 -> 2.6.0) vte (0.46.0 -> 0.46.1) xf86-video-nouveau === Details === ==== Mesa ==== Subpackages: Mesa-32bit Mesa-dri-devel Mesa-dri-nouveau Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv2-2 Mesa-libglapi0 Mesa-libglapi0-32bit Mesa-libva libOSMesa9 libOSMesa9-32bit libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libwayland-egl1 libxatracker2 - Build Mesa-dri-nouveau only where available ==== NetworkManager-applet ==== Subpackages: NetworkManager-connection-editor libnm-gtk-data libnm-gtk0 libnma-data libnma0 typelib-1_0-NMGtk-1_0 - Package libnma-data as noarch. ==== appstream-glib ==== Version update (0.6.4 -> 0.6.5) Subpackages: libappstream-builder8 libappstream-glib8 - Update to version 0.6.5: + Trivial changes: - Allow the stemmer to be disabled at runtime for testing. - Allow priming the search cache using a NULL search value. - Allocate less strings when generating the token cache. - Show threaded tasks in bold in the profile output. - Speed up checking token validity by a few ms. - Restore behaviour compatibility to fix self tests. - Add API to set the smallest recorded delay time. - Only load native languages from desktop files when the flag is set. - Output profiling infomation to stderr. - Unsingleton AsStemmer and use a shared instance in AsStore. + Do not sent a REMOVED signal when deleting a transient temp file. + Process file changes when an attribute changes. + Handle files being moved into monitored AppStream directories. + Add a 'watch' command to appstream-util. + Monitor missing AppStream directories. + Revert "trivial: Restrict the bundle kind when parsing local files". + Ensure the component scope is set when loading yaml files. + Always copy the installed state when replacing AppData with AppStream. + Merge also the metadata when merging two apps. + Add app-removed, app-added and app-changed signals to AsStore. + Only transliterate when the locale requires it. + Add as_store_load_search_cache(). + Load the search token blacklist into a hash table. + Use multiple threads to load the search cache. + Only load native languages when parsing AppStream data. + Allow the client to control what search fields are indexed. ==== baobab ==== Version update (3.22.0 -> 3.22.1) - Update to version 3.22.1: + Updated translations. ==== digikam ==== Version update (5.2.0 -> 5.3.0) Subpackages: kipi-plugins kipi-plugins-lang - Update to Digikam v5.3.0: https://www.digikam.org/node/761 * bugfixes - Drop upstreamed patch migration_from_digikam4.diff ==== dolphin ==== Subpackages: dolphin-part libdolphinvcs5 - Recommend kio-extras5 instead of kio_mtp5, the latter doesn't exist any more and is part of kio-extras5 now. ==== evolution ==== Version update (3.22.1 -> 3.22.2) Subpackages: evolution-plugin-bogofilter evolution-plugin-pst-import evolution-plugin-spamassassin - Update to version 3.22.2: + If body contains just the empty block, then nothing is sent. + Make the EContentEditor accessible in tests. + Consume return value of gtk_clutter_init_with_args()/gtk_init_with_args(). + Use unique D-Bus service name for WebKit editor and cancel pending calls on dispose. + Do not steal focus when alarm notify dialog is shown. + EEditorPage is never freed. + Fix e_mail_display_get_selection_plain_text_sync(). + The "Reply from preview selection" feature is wrong for multipart messages. + Correct the mime type of preview selection string. + Tests are expecting the font-family attribute on BODY. + Skip the tests that are known to fail. + Extra quoted character on the end of the quoted PRE element if it ends with BR element. + Renew spell-check only in viewport and not in the whole document. + Editor is not marked as changed after some operations. + Fix possible crash (use-after-free) under mail_send_receive(). + Bugs fixed: bgo#772150, bgo#772803, bgo#772590, bgo#772916, bgo#772918, bgo#773164, bgo#769733, bgo#773033, bgo#772858, bgo#773396, bgo#773236, bgo#771821, bgo#773494, bgo#773864. + Updated translations. ==== evolution-data-server ==== Version update (3.22.1 -> 3.22.2) Subpackages: libcamel-1_2-59 libebackend-1_2-10 libebook-1_2-16 libebook-contacts-1_2-2 libecal-1_2-19 libedata-book-1_2-25 libedata-cal-1_2-28 libedataserver-1_2-22 libedataserverui-1_2-1 - Update to version 3.22.2: + [IMAPx] Avoid crash when untagged response doesn't have a token. + Bugs fixed: bgo#772095, bgo#772347, bgo#767807, bgo#773248, bgo#773363. + Updated translations. ==== evolution-ews ==== Version update (3.22.1 -> 3.22.2) Subpackages: evolution-ews-lang libeews-1_2-0 libewsutils0 - Update to version 3.22.2: + Runtime warnings when calling ResolveNames. + Bugs fixed: bgo#770936, bgo#738093, bgo#773379. ==== freeipmi ==== Version update (1.5.4 -> 1.5.5) - Update to 1.5.5 o Fix invalid flag clear in libipmiconsole that can lead to a potential double close on a file descriptor. o Support Supermicro H8SGL-F OEM sensors and events. ==== glib2 ==== Version update (2.50.1 -> 2.50.2) Subpackages: glib2-devel glib2-tools libgio-2_0-0 libgio-2_0-0-32bit libglib-2_0-0 libglib-2_0-0-32bit libgmodule-2_0-0 libgmodule-2_0-0-32bit libgobject-2_0-0 libgobject-2_0-0-32bit libgthread-2_0-0 libgthread-2_0-0-32bit - Update to version 2.50.2: + Bugs fixed: bgo#767882, bgo#769135, bgo#769630, bgo#772054, bgo#773303, bgo#773344. + Updated translations. ==== gnome-color-manager ==== Version update (3.22.1 -> 3.22.2) Subpackages: gnome-color-manager-lang - Update to version 3.22.2: + Updated translations. ==== gnome-desktop ==== Version update (3.22.1 -> 3.22.2) Subpackages: gnome-version libgnome-desktop-3-12 libgnome-desktop-3_0-common typelib-1_0-GnomeDesktop-3_0 - Update to version 3.22.2: + Updated translations. ==== gnome-maps ==== Version update (3.22.1 -> 3.22.2) - Update to version 3.22.2: + Handle a plain 00:00-24:00 opening hour specification as being "always open" for POIs. + Updated translations. ==== gnome-online-accounts ==== Version update (3.22.1 -> 3.22.2) Subpackages: libgoa-1_0-0 libgoa-backend-1_0-1 typelib-1_0-Goa-1_0 - Update to version 3.22.2: + Updated translations. ==== gnome-photos ==== Version update (3.22.1 -> 3.22.2) Subpackages: gnome-shell-search-provider-gnome-photos - Update to version 3.22.2: + Bugs fixed: bgo#770342, bgo#772813. + Updated translations. ==== gnome-power-manager ==== Version update (3.22.1 -> 3.22.2) - Update to version 3.22.2: + Rename the graph widget and sync changes from other projects. + Updated translations. ==== gnome-session ==== Version update (3.22.1 -> 3.22.2) Subpackages: gnome-session-core gnome-session-default-session - Update to version 3.22.2: + Misc fixes to gnome-session-check-accelerated. + Updated translations. - Add pkgconfig(epoxy) BuildRequires: new verified dependency. ==== gnome-software ==== Version update (3.22.1 -> 3.22.2) - Update to version 3.22.2: + Large number of fixes and improvements for flatpak support. + Improved handling for flatpak repos with multiple branches. + Initial support for installing flatpakrepo files. + Fix a crash when searching for codecs. + Fix a crash when de-duplicating applications. + Speed improvements for loading appstream data. + Refactor snapd handling code using snapd-glib. + Show the search bar when the user does Ctrl+f. + Updated translations. ==== gnome-terminal ==== Version update (3.22.0 -> 3.22.1) Subpackages: gnome-shell-search-provider-gnome-terminal nautilus-extension-terminal - Update to version 3.22.1: + screen: - Remove WINDOWID env var on non-X11. - container: Set widget CSS name (bgo#772134). + client: legacy: - Warn if no startup ID provided. - Add VTE version and features to --version output (bgo#771960). + Updated translations. ==== gspell ==== Version update (1.2.0 -> 1.2.1) - Update to version 1.2.1: + Updated translations. ==== gtk3 ==== Version update (3.22.2 -> 3.22.3) Subpackages: gtk3-data gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Update to version 3.22.3: + Deprecations have been added for APIs that will be removed in GTK+ 4. + gtk-demo has gained a new demo for showing (and testing) rendering preformance + Windows: - The GL support has been improved. Legacy contexts can now be created, and anti-aliasing is possible - Hi-DPI is now supported + Bugs fixed: bgo#768081, bgo#773274, bgo#773474, bgo#773479, bgo#773528, bgo#773799, bgo#773857, bgo#773885. + Updated translations. ==== gtksourceview ==== Version update (3.22.0 -> 3.22.1) Subpackages: libgtksourceview-3_0-1 typelib-1_0-GtkSource-3_0 - Update to version 3.22.1: + Bug fix in gtk_source_buffer_sort_lines(). + Fixes in the win32 MSVC build. + Updated translations. ==== gvfs ==== Version update (1.30.1.1 -> 1.30.2) Subpackages: gvfs-backend-afc gvfs-backend-samba gvfs-backends gvfs-fuse - Update to version 1.30.2: + Trash: Do not crash if home mount isn't found. + Admin: Fix polkit errors caused by redundant translations. + Updated translations. ==== khotkeys5 ==== Subpackages: khotkeys5-devel - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== kinfocenter5 ==== - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== kmenuedit5 ==== - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== kscreen5 ==== - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== ksysguard5 ==== - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== ksystemlog ==== - Add missing pkgconfig(libsystemd-journal) BuildRequires - Update other Qt5 and KF5 BuildRequires to match reality ==== kwin5 ==== Subpackages: kwin5-devel - Introduce new _plasma5_bugfix global for more fine-tuned dependencies - Update BuildRequires accordingly ==== libkscreen2 ==== Subpackages: libKF5Screen7 libkscreen2-devel libkscreen2-plugin - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== libpst ==== Version update (0.6.68 -> 0.6.69) - Update to version 0.6.69: + Fix bugs in code allowing folders containing multiple item types. ==== libvirt ==== Version update (2.3.0 -> 2.4.0) Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - Package org.libvirt.api.policy polkit file (bsc#959297) - Fix postun systemd services cleanup - Mark /etc/libvirt/nwfilter/*.xml files as config files - Update to libvirt 2.4.0 - Many incremental improvements and bug fixes, see http://libvirt.org/news.html ==== oxygen5 ==== Subpackages: oxygen5-cursors oxygen5-decoration oxygen5-devel oxygen5-lang oxygen5-sounds oxygen5-style - Added Fix-broken-kcfgc-files.patch from upstream - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== perl-Devel-GlobalDestruction ==== Version update (0.13 -> 0.14) - updated to 0.14 see /usr/share/doc/packages/perl-Devel-GlobalDestruction/Changes Revision history for Devel-GlobalDestruction 0.14 - 2016-10-31 - stop relying on . being in @INC - switch to ExtUtils::HasCompiler to detect presence of a compiler ==== perl-Sub-Exporter-Progressive ==== Version update (0.001012 -> 0.001013) - updated to 0.001013 see /usr/share/doc/packages/perl-Sub-Exporter-Progressive/Changes 0.001013 2016-10-21 08:48:28-07:00 America/Los_Angeles - Avoid possible warnings about special variables only being used once (Graham Knop) ==== plasma5-addons ==== - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== plasma5-desktop ==== - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== plasma5-integration ==== - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== plasma5-openSUSE ==== Subpackages: plasma5-defaults-openSUSE plasma5-theme-openSUSE plasma5-workspace-branding-openSUSE sddm-theme-openSUSE - Install kdeglobals to /etc/kde4/share/config/ as well to set Firefox as default browser for KDE4 applications (boo#997199) ==== plasma5-workspace ==== Subpackages: drkonqi5 plasma5-workspace-devel plasma5-workspace-libs - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== powerdevil5 ==== - Introduce new _plasma5_bugfix global for more fine-tuned dependencies ==== python-python-dateutil ==== Version update (2.4.2 -> 2.6.0) - Use https for Source - Update to version 2.6.0 * Added PEP-495-compatible methods to address ambiguous and imaginary dates in time zones in a backwards-compatible way. Ambiguous dates and times can now be safely represented by all dateutil time zones. Many thanks to Alexander Belopolski (@abalkin) and Tim Peters @tim-one for their inputs on how to address this. Original issues reported by Yupeng and @zed (lP: 1390262, gh issues #57, #112, #249, [#284], #286, prs #127, #225, #248, #264, #302). * Added new methods for working with ambiguous and imaginary dates to the tz module. datetime_ambiguous() determines if a datetime is ambiguous for a given zone and datetime_exists() determines if a datetime exists in a given zone. This works for all fold-aware datetimes, not just those provided by dateutil. (gh issue #253, gh pr #302) * Fixed an issue where dst() in Portugal in 1996 was returning the wrong value in tz.tzfile objects. Reported by @abalkin (gh issue #128, pr #225) * Fixed an issue where zoneinfo.ZoneInfoFile errors were not being properly deep-copied. (gh issue #226, pr #225) * Refactored tzwin and tzrange as a subclass of a common class, tzrangebase, as there was substantial overlapping functionality. As part of this change, tzrange and tzstr now expose a transitions() function, which returns the DST on and off transitions for a given year. (gh issue [#260], pr #302) * Deprecated zoneinfo.gettz() due to confusion with tz.gettz(), in favor of get() method of zoneinfo.ZoneInfoFile objects. (gh issue #11, pr #310) * For non-character, non-stream arguments, parser.parse now raises TypeError instead of AttributeError. (gh issues [#171], #269, pr #247) * Fixed an issue where tzfile objects were not properly handling dst() and tzname() when attached to datetime.time objects. Reported by @ovacephaloid. (gh issue #292, pr #309) * /usr/share/lib/zoneinfo was added to TZPATHS for compatibility with Solaris systems. Reported by @dhduvall (gh issue #276, pr #307) * tzoffset and tzrange objects now accept either a number of seconds or a datetime.timedelta() object wherever previously only a number of seconds was allowed. (gh pr #264, #277) * datetime.timedelta objects can now be added to relativedelta objects. Reported and added by Alec Nikolas Reiter (@justanr) (gh issue #282, pr #283 * Refactored relativedelta.weekday and rrule.weekday into a common base class to reduce code duplication. (gh issue #140, pr #311) * An issue where the WKST parameter was improperly rendering in str(rrule) was reported and fixed by Daniel LePage (@dplepage). (gh issue #262, pr #263) * A replace() method has been added to rrule objects by @jendas1, which creates new rrule with modified attributes, analogous to datetime.replace (gh pr #167) * Made some significant performance improvements to rrule objects in Python 2.x (gh pr #245) * All classes defining equality functions now return NotImplemented when compared to unsupported classes, rather than raising TypeError, to allow other classes to provide fallback support. (gh pr #236) * Several classes have been marked as explicitly unhashable to maintain identical behavior between Python 2 and 3. Submitted by Roy Williams (@rowillia) (gh pr #296) * Trailing whitespace in easter.py has been removed. Submitted by @OmgImAlexis (gh pr #299) * Windows-only batch files in build scripts had line endings switched to CRLF. (gh pr #237) * @adamchainz updated the documentation links to reflect that the canonical location for readthedocs links is now at .io, not .org. (gh pr #272) * Made some changes to the CI and codecov to test against newer versions of Python and pypy, and to adjust the code coverage requirements. For the moment, full pypy3 compatibility is not supported until a new release is available, due to upstream bugs in the old version affecting PEP-495 support. (gh prs #265, #266, #304, #308) * The full PGP signing key fingerprint was added to the README.md in favor of the previously used long-id. Reported by @valholl (gh issue #287, pr #304) * Updated zoneinfo to 2016i. (gh issue #298, gh pr #306) ==== python3-python-dateutil ==== Version update (2.5.3 -> 2.6.0) - Update to version 2.6.0 * Added PEP-495-compatible methods to address ambiguous and imaginary dates in time zones in a backwards-compatible way. Ambiguous dates and times can now be safely represented by all dateutil time zones. Many thanks to Alexander Belopolski (@abalkin) and Tim Peters @tim-one for their inputs on how to address this. Original issues reported by Yupeng and @zed (lP: 1390262, gh issues #57, #112, #249, [#284], #286, prs #127, #225, #248, #264, #302). * Added new methods for working with ambiguous and imaginary dates to the tz module. datetime_ambiguous() determines if a datetime is ambiguous for a given zone and datetime_exists() determines if a datetime exists in a given zone. This works for all fold-aware datetimes, not just those provided by dateutil. (gh issue #253, gh pr #302) * Fixed an issue where dst() in Portugal in 1996 was returning the wrong value in tz.tzfile objects. Reported by @abalkin (gh issue #128, pr #225) * Fixed an issue where zoneinfo.ZoneInfoFile errors were not being properly deep-copied. (gh issue #226, pr #225) * Refactored tzwin and tzrange as a subclass of a common class, tzrangebase, as there was substantial overlapping functionality. As part of this change, tzrange and tzstr now expose a transitions() function, which returns the DST on and off transitions for a given year. (gh issue [#260], pr #302) * Deprecated zoneinfo.gettz() due to confusion with tz.gettz(), in favor of get() method of zoneinfo.ZoneInfoFile objects. (gh issue #11, pr #310) * For non-character, non-stream arguments, parser.parse now raises TypeError instead of AttributeError. (gh issues [#171], #269, pr #247) * Fixed an issue where tzfile objects were not properly handling dst() and tzname() when attached to datetime.time objects. Reported by @ovacephaloid. (gh issue #292, pr #309) * /usr/share/lib/zoneinfo was added to TZPATHS for compatibility with Solaris systems. Reported by @dhduvall (gh issue #276, pr #307) * tzoffset and tzrange objects now accept either a number of seconds or a datetime.timedelta() object wherever previously only a number of seconds was allowed. (gh pr #264, #277) * datetime.timedelta objects can now be added to relativedelta objects. Reported and added by Alec Nikolas Reiter (@justanr) (gh issue #282, pr #283 * Refactored relativedelta.weekday and rrule.weekday into a common base class to reduce code duplication. (gh issue #140, pr #311) * An issue where the WKST parameter was improperly rendering in str(rrule) was reported and fixed by Daniel LePage (@dplepage). (gh issue #262, pr #263) * A replace() method has been added to rrule objects by @jendas1, which creates new rrule with modified attributes, analogous to datetime.replace (gh pr #167) * Made some significant performance improvements to rrule objects in Python 2.x (gh pr #245) * All classes defining equality functions now return NotImplemented when compared to unsupported classes, rather than raising TypeError, to allow other classes to provide fallback support. (gh pr #236) * Several classes have been marked as explicitly unhashable to maintain identical behavior between Python 2 and 3. Submitted by Roy Williams (@rowillia) (gh pr #296) * Trailing whitespace in easter.py has been removed. Submitted by @OmgImAlexis (gh pr #299) * Windows-only batch files in build scripts had line endings switched to CRLF. (gh pr #237) * @adamchainz updated the documentation links to reflect that the canonical location for readthedocs links is now at .io, not .org. (gh pr #272) * Made some changes to the CI and codecov to test against newer versions of Python and pypy, and to adjust the code coverage requirements. For the moment, full pypy3 compatibility is not supported until a new release is available, due to upstream bugs in the old version affecting PEP-495 support. (gh prs #265, #266, #304, #308) * The full PGP signing key fingerprint was added to the README.md in favor of the previously used long-id. Reported by @valholl (gh issue #287, pr #304) * Updated zoneinfo to 2016i. (gh issue #298, gh pr #306) ==== vte ==== Version update (0.46.0 -> 0.46.1) Subpackages: libvte-2_91-0 typelib-1_0-Vte-2.91 - Update to version 0.46.1: + app: Add MULTILINE flag for regex + app: Fix search button sensitivity + app: Fix button icon name + widget: Fix backward search + build: Require vala 0.24 + Updated translations. ==== xf86-video-nouveau ==== - remove Supplements: xorg-x11-server; we do have conditional supplements depending on NVIDIA GPUs since some time (bnc#1007703) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] CMake & ncurses
by Will Godfrey 11 Nov '16

11 Nov '16

Hi, new kid on the block here. I'm one of the developers for the Yoshimi soft-synth, and have recently been informed that it won't compile on Leap 42.1/42.2. It seems that the version of ncurses here doesn't have a .pc file, so CMake's find_package function is unable to locate it. Is this just an oversight, or done deliberately for some reason? Can anyone suggest an alternative way for CMake to identify ncurses? -- Will J Godfrey -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 8

[opensuse-factory] openSUSE Tumbleweed – Review of the Week 2016/45
by Dominique Leuenberger / DimStar 11 Nov '16

11 Nov '16

Dear Tumbleweed users and hackers, Tumbleweed is unstoppable – Can you keep up with the updates? This week, we released 5 snapshots (1104, 1105, 1107, 1108 and 1109) – and the next one is likely not too far away. But you expected that. With so many snapshots, what did we get? * GNOME 3.22.2 (bits and pieces spread through the snapshots, some small apps still coming) * KDE Plasma 5.8.3 * ffmpeg 3.2 * Linux kernel 4.8.6 * Samba 4.5.0 * Mesa 13.0 * Libreoffice 5.2.3.3 * linux-glibc-devel 4.8 Quite impressive list this time – and in fact almost none of those caused any trouble in the staging areas. It ‘looked’ like an easy week to me. This is all due to the great efforts the package maintainers do when submitting things. High quality packages cause less trouble. So, at this place: Thank you! With so many things delivered this week, I’m running out of submissions, and my list of upcoming things is rather short for now: * Digikam 5.3.0 (1110+) * KDE Applications 16.08.3 * Linux Kernel 4.8.7 * qemu 2.7 Keep your systems up-to-date, send in great features you’d like to see, and have a lot of fun

2 1

[opensuse-factory] Leap 42.2: Kmail 5.3.0 installed as default
by Axel Braun 11 Nov '16

11 Nov '16

Hi, I did a fresh install of Leap 42.2 RC2 from USB-Stick with update repositories enabled. Quite surprised to see that KMail 5.3.0 was installed by default - was the idea not to keep 4.14.10 (or so...)? Cheers Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 19

[opensuse-factory] TW on Thinkpad R51 - how?
by Werner Flamme 11 Nov '16

11 Nov '16

Hi everyone, I tried to install TW (snapshot 20161102) on one of my old laptops, an IBM Thinkpad R51. It has a Intel PentiumM processor, 32bit, 1 core, and 2 GiB RAM. When booting from the DVD, I can see the EDD check, then the screen becomes black and the laptop reboots. I tried several parameters, last combination was "edd=off nosmp nolapic noacpi nomodeset noefi" - but still rebooting. Some hints how I can get my old R51 to run Tumbleweed anyone? BTW, the laptop hasn't been touched for more than 3 years now and has a working installation of openSUSE 12.3 on it :). I just want to update... Thanks in advance! Werner --

6 9

[opensuse-factory] New Tumbleweed snapshot 20161109 released!
by Dominique Leuenberger 10 Nov '16

10 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: libX11 libreoffice (5.2.2.2 -> 5.2.3.3) linux-glibc-devel (4.7 -> 4.8) lirc (0.9.4a -> 0.9.4c) === Details === ==== libX11 ==== Subpackages: libX11-6 libX11-6-32bit libX11-data libX11-devel libX11-xcb1 libX11-xcb1-32bit - u_nls-fix-handling-of-cs_CZ.UTF8_locale.patch * refix cs_CZ.UTF-locale (boo#1008951, fdo#81875, fdo#98219) - Run fdupes over at least the manpages ==== libreoffice ==== Version update (5.2.2.2 -> 5.2.3.3) Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions libreofficekit - Add provides/obsoletes for brazilian and chinese to be matched on dvd bnc#1008743 - Update to 5.2.3.3: * small fix from .2 release - Version update to 5.2.3.2: * Various small fixes in the 5.2 branch - Move the firebird db connector to subpackage wrt bsc#1003896 - Refresh a bit patch 0001-allow-none-gi-support.patch ==== linux-glibc-devel ==== Version update (4.7 -> 4.8) - Update to kernel headers 4.8 ==== lirc ==== Version update (0.9.4a -> 0.9.4c) Subpackages: libirrecord0 liblirc0 liblirc_client0 liblirc_driver0 lirc-devel - Move workarounds to %prep section - Add lirc-configure-libudev.patch (boo#1008764) - Fix %pre script - Add lirc-lib-curl_poll.h-Ensure-build-on-unconfiguredclients.patch - Update to version 0.9.4c * New curl_poll files adds a new MIT license. Lirc now carries GPL, BSD and MIT licenses. * Several patches to make lirc work again on macos (#226, #227). * New tool irtext2udp generates udp plugin data (#197). * plugins: girs: Add udp/receive support (#201). * mode2: Fix broken --raw option (#223). * lirc-make-devinput: Fix that two remotes has the same name (#222). * lircd: Warn for duplicate remote definitions (#222). * lircd: Retry temporary unavailable write sockets (#221). * contrib: Fix usb devices' acl permissions (rhbz #1364744). * lirc-setup: Fix crasher bugfix (Fedora abort trace). * contrib: disable udev /dev/uinput rule requiring lirc user. * plugins: audio_alsa: Fix byte truncating in 16-bit data (#218): * plugins: irtoy: improve error handling (#220). * Minor documentation fixes. - Changes from version 0.9.4b * lircd-uinput: A multitude of fixes (#213, #211, #177). Adds new options. * lirc_client: Fix "Can't redirect irsend output" (#207). * lirc_client: Fix un-terminated buffer causing irsend crash (#216). * irrecord: Fix under-sized buffer causing crash (#208). * systemd: Add hardening options comments to services (#204). * lircmd: Options, udev examples and manpage update. * lib: Add missing Makefile.am dep, fixes parallel build failure (#210). * Remove a single python2 dependency [4e3c97c]. * build: Don't define docdir - autoconf defines docdir (#215). * build: support runstatedir configure option (#212). * doc: Manpages and configuration guide fixes. - Remove fix-remote-keys.pl, README.SUSE and 51-lirc.rules; not relevant for a while already - Remove 0001-Fix-segfault-when-starting-lircd-AUR-41581.patch and 0002-lircd-Fix-bad-default-for-lircdfile.patch; fixed on upstream - Add missing dependency to systemd - Global sweeping - Add lirc nologgin user; now needed - Add lircd-Remove-use-of-functions-killed-in-kernel-4.8.0.patch; fix build on openSUSE > 42.2 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] switch between nvidia and nouveau
by mh＠mike.franken.de 10 Nov '16

10 Nov '16

Hi *, I've searched for a long time, but couldn't find a solution: Is there a simple method to switch between the nivida and the nouveau driver, perhaps some script to modfiy the various affected configuration files? Systems are openSuSE Leap 42.1 or 42.2 RC2 or Tumbleweed. Thx for any hint. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4