November 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Analysis of ABI changes in the Linux kernel
by Ponomarenko Andrey 28 Nov '16

28 Nov '16

Hello, This is a tracker of ABI changes in the new upstream releases of the Linux kernel (defconfig, x86_64): https://abi-laboratory.pro/tracker/timeline/linux/ The tracker performs backward binary compatibility analysis of all public exported symbols and data types (declared in the ".ksymtab" and ".ksymtab_gpl" sections of the vmlinux binary + system calls) and lists all added/removed symbols. The source code of the tool is published on github: https://github.com/lvc/kernel-abi-tracker The tool can be used to analyze downstream kernels as well. See README of the project. It's better to use ABICC 2.0 Beta or newer to improve performance of the analysis. Enjoy! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] undesirable behavior regards snapper and core-dumps
by nicholas cunliffe 28 Nov '16

28 Nov '16

It would appear core dumps in /var/lib/systemd/coredump/ are included in snapshots. Given that: 1. they are not required for most users and in any case are unlikely to be data of such value they require a backup. 2. can be extremely large and numerous 3. can be generated regularly e.g. systemd shutdown saga it would seem rather undesirable to include them in snapshots, (if someone else could confirm this is not isolated to my system!) i would suggest placing on separate subvolume. Nicholas -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Tumbleweed on SSD stopped booting
by k-16＠trixtar.org 27 Nov '16

27 Nov '16

I have this *Let's see about ssd's* install on partition 3 of a 250gb tester (GPT table). It stopped booting (possibly after an update). Some start job is not completing. see attached. The SSD is in a new iStar rack http://trixtar.org/3/tinkerings/quietcool/quietcool.html ..second rack image near bottom I've noticed that as opposed to the other magnetic drives showing blue lights the light for this SSD is ALWAYS pinkish, as if it were always writing. TIA

6 10

Re: [RESOLVED] Re: [opensuse-factory] Tumbleweed Network without kWalet?
by k-16＠trixtar.org 27 Nov '16

27 Nov '16

> did you intentionally respond off-list? If not, feel free to forward my > reply to to the mailinglist ;-) my apologies, i saw opensuse and went for what i thought was the list! > > /etc/resolve.conf > > # Generated by NetworkManager > > > > with nothing else in it. I have *no idea* how this came > > about, I certainly didn't meddle at the networking file > > level because it's all over my head to begin with. > > That sounds like a NetworkManager bug Tumbleweed had some months ago. > However, I wonder why you hit this now - it's fixed since quite a while > (IIRC you need to manually fix or delete resolv.conf once if you were > affected - but I wonder why it took so long until you noticed this). If it's fixed than I sdon't understand why it was still there, my install had most updates applied. I had installed that TW but had so many freakin' plasma5 issues with it that it went on the back burner. It's stil there BTW but i just went at it for a short while to see if it had improved (not even close). > Feel free to open a feature request ;-) how, where? > It might help to ask for a "details..." button because displaying all > the error messages by default could be considered scary for average > users. Also note that people like you and me probably don't count as > average users ;-) i din't mean error messages but the config files, and as a general hardwired design principle in all realms say, up comes dialog X, on the input placard: "This dialog X reads and on demand edits file /path/xyz.conf" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] undesirable behavior regards snapper and core-dumps
by nicholas cunliffe 27 Nov '16

27 Nov '16

It would appear core dumps in /var/lib/systemd/coredump/ are included in snapshots. Given that: 1. they are not required for most users and in any case are unlikely to be data of such value they require a backup. 2. can be extremely large and numerous 3. can be generated regularly e.g. systemd shutdown saga it would seem rather undesirable to include them in snapshots, (if someone else could confirm this is not isolated to my system!) i would suggest removing cow from this directory. Nicholas -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Failing to load luks unlock screen on bootup occasionally
by Chan Ju Ping 27 Nov '16

27 Nov '16

I have been getting increasingly frequent failures to load the luks unlock screen on boot-up. To circumvent the issue, I have been restarting opensuse until it boots properly. I have an Ubuntu drive which does not experience the same booting issue, so it is probably not faulty hardware. I am trying to see what's wrong with the boot process that is causing these occasional failures, but the /var/log/boot.log file begins with: >%G(K%G(K%G(K%G%G(K(K[[0;32m OK [0m] Found device /dev/mapper/ cr_ata-ST2000DM001-1CH164_W1E8K3N6-part1. >[[0;32m OK [0m] Started Cryptography Setup for cr_ata- ST2000DM001-1CH164_W1E8K3N6-part1. Any suggestions on debugging this problem?

2 8

[opensuse-factory] Tumbleweed Network without kWalet?
by k-16＠trixtar.org 26 Nov '16

26 Nov '16

This is NOT happening on my asus-g73 laptop, only on my Athlon desktop. As far as I can tell the settings are the same but not the behavior. For some reason when I want to connect to my router (and printer) the network dialog asks me for the root password, which is OK. But then it also wants to store that password which I'm not interested in. Until recently I could just give the root password, then cancel on kWalet, and follow by giving the network password. This gave me volatile access until the contact would broke for whatever reason (it IS the procedure I prefer since I do not beleieve ion storing any password anywhere. which file should I copy over from the laptop? I have just about all updates in on both machines. TIA -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

[opensuse-factory] how to investigate problem of DUD file not handled by yast ?
by Normand 25 Nov '16

25 Nov '16

Hello there, I want to provide a new powerpc-utils rpm via a DUD, for yast to use this new rpm rather than the one from installed DVD. Is it supposed to work ? My trials are not successfull, and the y2log continue to show installation of "old" rpm from DVD. I am not able to find in y2log a reference to a repo that could be associated to the DUD file retrieved by linuxrc. Do you have any idea on how I should investigate such problem ? I tried using mkdud either pointing to a dir (1) or a specific rpm (2) but that do not change the behaviour. === (1) $mkdud -c boo1011529_3.dud --dist tw /home/michel/buildtmp/build-root/standard-ppc64le/home/abuild/rpmbuild/RPMS/ppc64le/ === (2) $mkdud -c boo1011529_5.dud --dist tw /home/michel/buildtmp/build-root/standard-ppc64le/home/abuild/rpmbuild/RPMS/ppc64le/powerpc-utils-1.3.2-9.ppc64le.rpm === linuxrc output extract: ok, ip = 10.0.2.15/24 Loading http://stade.lab.toulouse-stg.fr.ibm.com/~normand/boo1011529_5.dud - 100% http://stade.lab.toulouse-stg.fr.ibm.com/~normand/boo1011529_5.dud: adding to installation system Driver Updates added: ~normand/boo1011529_5.dud === -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] openSUSE Tumbleweed – Review of the Week 2016/47
by Dominique Leuenberger / DimStar 25 Nov '16

25 Nov '16

Dear Tumbleweed users and hackers, It seems unbelievable, but we did it again: a week with a new snapshot every single day. This review will cover the 7 snapshots {1117..1123}. Unfortunately, That’s the end of the streak, as we had to cancel 1124 already due to sddm doing something strange with the login screen. But we’re confident that the currently building snapshot will be fine again and will reach you tomorrow. What did the 7 snapshots bring to the openSUSE Tumbleweed userbase: * Mesa 13.0.1 – minor update from 13.0.0 * Mozilla Firefox 50.0 * KDE Frameworks 5.28.0 * 3 Kernel updates (4.8.8, 4.8.9 and 4.8.10) * cmake 3.7.0 * systemd package closing the gap to SLE, preparing for more intrusive updates And there are some things piling up to be delivered to you: * X.Org 1.19.0 – some driver updates are ready, some still need adjustments * sddm 0.14.0 – second attempt That’s just the noteworthy things that are already in the queue to Tumbleweed; but I’m sure the various developer teams are preparing many more things in their dev spaces. Have a great weekend, Dominique

1 0

[opensuse-factory] apache-test
by Petr Gajdos 25 Nov '16

25 Nov '16

Hi, you may know there is a possibility to test your apache instance[1]. It is packaged now in Apache:Test/apache-test. Also, apache-test can be used to test the buildrequired httpd during apache-test's %check (as it actually is in Apache:Test itself for several distros). Petr [1] http://svn.apache.org/viewvc/httpd/test/framework/trunk/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161123 released!
by Dominique Leuenberger 25 Nov '16

25 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: iio-sensor-proxy kernel-source (4.8.9 -> 4.8.10) libyui-ncurses (2.47.7 -> 2.48.0) libyui-qt (2.46.30 -> 2.47.0) logrotate sqlite3 (3.15.0 -> 3.15.1) yast2 (3.2.4 -> 3.2.5) yast2-bootloader (3.2.7 -> 3.2.10) yast2-country (3.2.0 -> 3.2.1) yast2-installation (3.2.9 -> 3.2.10) yast2-storage (3.2.0 -> 3.2.1) === Details === ==== iio-sensor-proxy ==== - Add iio-sensor-proxy-delay-starting-daemon.patch: Add artificial delay before starting daemon to prevent failure to work right off a cold boot; patch taken from upstream git (gh#hadess/iio-sensor-proxy#82). ==== kernel-source ==== Version update (4.8.9 -> 4.8.10) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - zram: Fix unbalanced idr management at hot removal (bsc#1010970). - commit d1ec066 - Linux 4.8.10 (: :). - commit 86386e1 ==== libyui-ncurses ==== Version update (2.47.7 -> 2.48.0) - Add hotkey for help about advanced hotkeys (bsc#1010039) - 2.48.0 ==== libyui-qt ==== Version update (2.46.30 -> 2.47.0) - Add handler for Shift-F1 to show advanced keyboard shortcuts (bsc#1010039) - 2.47.0 ==== logrotate ==== - Fix post scriptlet condition bnc#1011120 ==== sqlite3 ==== Version update (3.15.0 -> 3.15.1) Subpackages: libsqlite3-0 libsqlite3-0-32bit sqlite3-devel sqlite3-doc - SQLite 3.15.1: * Fix the VACUUM command so that it spills excess content to disk rather than holding everything in memory, and possible causing an out-of-memory error for larger database files * Fix a case where OR-connected terms in the ON clause of a LEFT JOIN might cause incorrect results * Fix a case where the use of row values in the ON clause of a LEFT JOIN might cause incorrect results ==== yast2 ==== Version update (3.2.4 -> 3.2.5) - Remove the restart file when starting YaST to avoid possible infinite loop (bsc#842910) - 3.2.5 ==== yast2-bootloader ==== Version update (3.2.7 -> 3.2.10) - Do not crash in bootloader when default mount by is set to label (bsc#1009493) - 3.2.10 - use proper sources when doing kexec (bsc#981434) - 3.2.9 - when protecting modification of kernel parameters by password, add also rd.shell=0 parameter to avoid getting into initrd shell (bsc#1009220) - 3.2.8 ==== yast2-country ==== Version update (3.2.0 -> 3.2.1) Subpackages: yast2-country-data - Set keyboard layout properly on installation system (bsc#1010938) - 3.2.1 ==== yast2-installation ==== Version update (3.2.9 -> 3.2.10) - fix missing icon next to SSH Key Import in autoyast (bsc#988377) - add missing file causing crash (introduced with generic fix of bsc#1003682) (invisible in master since autotools support is dropped there) - 3.2.10 - Documentation for new storage related parameters in control.xml (Fate#321736) ==== yast2-storage ==== Version update (3.2.0 -> 3.2.1) - Don't show [Edit Proposal Settings] button if disabled in control.xml (Fate#321736) - Added warning popup for expert partitioner if configured in control.xml - 3.2.1 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] New Packages - Adapta Theme Suit and SASSC
by Ronan Arraes Jardim Chagas 24 Nov '16

24 Nov '16

Hi guys! Good morning/afternoon/evening, I am packaging the theme suit Adapta, which is a very good looking theme based on Material Design Guidelines. There are themes for many applications: - GTK2+ and GTK3+; - GNOME shell; - Metacity; - Cinnamon; - Xfwm4; - Xfce4 notifyd; - Plank; - Chrome(ium); and - openbox. Hence, it leads to a very integrated design. Moreover, there are four variants of the theme: Adapta, Adapta-Nokto, Adapta-Eta, Adapta-Eta- Nokto. The -Nokto variants are more dark themes to be used at night, whereas the -Eta variant uses compressed widgets for small screens. You can find more information here: https://github.com/adapta-project/adapta-gtk-theme The initial package version is already in my home repo: https://build.opensuse.org/package/show/home:Ronis_BR/adapta-gtk-theme To pack Adapta, I needed to also pack the SASSC, which is a wrapper around libsass. Hope you enjoy these themes :) I hope it reaches factory soon. Regards, Ronan Arraes -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] [42.1-> 42.2] Kernel driver not installed (rc=-1908) on VBox
by Mikhail Kasimov 24 Nov '16

24 Nov '16

Hello! After 42.1 -> 42.2 've got the message when vbox machine is getting started: =============== Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing '/sbin/vboxconfig' as root. where: suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The support driver is not installed. On linux, open returned ENOENT. =============== virtualbox reinstallation doesn't help. Who caught the same trouble, please? And what to do, if on 42.1 everything was fine? Thanks for advice! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 8

[opensuse-factory] New Tumbleweed snapshot 20161122 released!
by Dominique Leuenberger 23 Nov '16

23 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: MozillaThunderbird (45.4.0 -> 45.5.0) akonadi-server gpg2 (2.1.15 -> 2.1.16) gpgme (1.7.1 -> 1.8.0) igerman98 (20131206 -> 20160407) libgphoto2 (2.5.10 -> 2.5.11) libreoffice man-pages-ja (20151215 -> 20161115) perl-DBD-mysql (4.039 -> 4.040) perl-YAML (1.18 -> 1.19) phalanx (24 -> 25) systemd vim (8.0.45 -> 8.0.92) === Details === ==== MozillaThunderbird ==== Version update (45.4.0 -> 45.5.0) Subpackages: MozillaThunderbird-translations-common - Mozilla Thunderbird 45.5.0 (boo#1009026) - Changed behavior: * Changed recipient address entry: Arrow-keys now copy the pop-up value to the input field. Mouse-hovered pop-up value can no longer be confirmed with tab or enter key. This restores the behavior of Thunderbird 24. * Support changes to character limit in Twitter - Bugs fixed: * Reply with selected text containing quote resulted in wrong quoting level indication * Email invitation might not be displayed when description contains non-ASCII characters * Attempting to sort messages on the Date field whilst a quick filter is applied got stuck on sort descending * Mail address display at header pane displayed incorrectly if the address contains UTF-8 according to RFC 6532 ==== akonadi-server ==== Subpackages: libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiPrivate5 libKF5AkonadiWidgets5 libKF5AkonadiXml5 - Split out sqlite plugin into separete package to avoid whole server depending on Qt private API ==== gpg2 ==== Version update (2.1.15 -> 2.1.16) - GnuPG 2.1.16: * gpg: New algorithm for selecting the best ranked public key when using a mail address with -r, -R, or --locate-key. * gpg: New option --with-tofu-info to print a new "tfs" record in colon formatted key listings. * gpg: New option --compliance as an alternative way to specify options like --rfc2440, --rfc4880, et al. * gpg: Many changes to the TOFU implementation. * gpg: Improve usability of --quick-gen-key. * gpg: In --verbose mode print a diagnostic when a pinentry is launched. * gpg: Remove code which warns for old versions of gnome-keyring. * gpg: New option --override-session-key-fd. * gpg: Option --output does now work with --verify. * gpgv: New option --output to allow saving the verified data. * gpgv: New option --enable-special-filenames. * agent, dirmngr: New --supervised mode for use by systemd and alike. * agent: By default listen on all available sockets using standard names. * agent: Invoke scdaemon with --homedir. * dirmngr: On Linux now detects the removal of its own socket and terminates. * scd: Support ECC key generation. * scd: Support more card readers. * dirmngr: New option --allow-version-check to download a software version database in the background. * dirmngr: Use system provided CAs if no --hkp-cacert is given. * dirmngr: Use a default keyserver if none is explicitly set * gpgconf: New command --query-swdb to check software versions against an copy of an online database. * gpgconf: Print the socket directory with --list-dirs. * tools: The WKS tools now support draft version -02. * tools: Always build gpg-wks-client and install under libexec. * tools: New option --supported for gpg-wks-client. * The log-file option now accepts a value "socket://" to log to the socket named "S.log" in the standard socket directory. * Provide fake pinentries for use by tests cases of downstream developers. * Fixed many bugs and regressions. * Many changes and improvements for the test suite. - drop upstreamed patches: * 0001-common-Follow-up-to-14479e2-fix-void-return-in-non-v.patch * gnupg-2.1.15-bsc993324-status-output.patch ==== gpgme ==== Version update (1.7.1 -> 1.8.0) Subpackages: libgpgme-devel libgpgme11 libgpgmepp6 - gpgme 1.8: * The module of the Python bindings has been renamed to 'gpg'. * New interface to query current software versions. * New feature to use gpg's --{show,override}session-key options. * New interface to set the sender of a mail. * qt: Added Distinguished Name parser from libkleo * The --homedir option is now used with recent gpgconf versions. * The internal locking functions have been replaced by libgpg-error locking functions. * Interface changes relative to the 1.7.1 release: gpgme_set_sender NEW. gpgme_get_sender NEW. gpgme_op_query_swdb NEW. gpgme_op_query_swdb_result NEW. gpgme_query_swdb_result_t NEW. gpgme_get_ctx_flag NEW. gpgme_decrypt_result_t EXTENDED: New field session_key. qt: DN NEW. qt: DN::Attribute NEW. qt: Job::context(Job*) NEW. cpp: EngineInfo::Version::Version(const char*) NEW. cpp: EngineInfo::Version::Version() NEW. cpp: SwdbResult NEW. cpp: Context::setSender(const char*) NEW. cpp: Context::getSender() NEW. ==== igerman98 ==== Version update (20131206 -> 20160407) Subpackages: aspell-de ispell-ngerman - updated to 20160407: * some new words ==== libgphoto2 ==== Version update (2.5.10 -> 2.5.11) Subpackages: libgphoto2-6 libgphoto2-6-32bit libgphoto2-devel - updated to 2.5.11 release * canon: * not experimental anymore, for some years * some bugfixes in configuration handling * ptp2: * canon: EOS capture improvements, also supporting new EOS * sony: tethering and trigger capture implemented, capture stability improvements * sony: exposure compensation setting fixed * sony: capture and autofocus configurations, similar to eosremoterelease * generic: fixed serialnumber retrieval * nikon: "autofocus" config variable for global autofocus enable/disable (default on, default liveview off) * various bugs fixed, stability improved * ptpip: allow different event ports. --port ptpip:IP:dataport:eventport * New ids reported: - Sony Alpha 7, DSC-RX100M4, NEX-7, DSC-HX20V, Alpha 6300, A7S II, A7, - Nikon DSC Df, D7200, D5, D810A, 1 V3 - Canon EOS 1Dx Mark 3, 80D, 5D Mark IV - Canon Digital IXUS 180 - various music players / android phones imported from libmtp * libgphoto2: * Speed up initial startup. * Win32: store settings in the "User Profile\.gphoto\settings" and not in C:\\Windows anymore. * gp_widget_changed() no longer clears the "changed" state to make this API more consistent. Use gp_widget_set_changed(widget,FALSE) to do so. * examples: * sample-photobooth: a sample program handling tethering, SIGUSR1 driven capture and SIGUSR2 based configuration reading. * sample-afl: code to inject afl fuzzing data * translations: * updated swedish, ukrainian, polish, finnish, russian, danish, polish, brazilian, serbian, dutch, chinese - libgphoto2-newjpeg.patch: removed, upstream ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions libreofficekit - Introduce back scp2-user-config-suse.diff wrt bnc#1010654 as otherwise user configs would disappear with maintenance update... ==== man-pages-ja ==== Version update (20151215 -> 20161115) - update to 20161115 * added and improved manual pages ==== perl-DBD-mysql ==== Version update (4.039 -> 4.040) - updated to 4.040 see /usr/share/doc/packages/perl-DBD-mysql/Changes 2016-11-19 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.040) * Since 4.038 we had problems compiling on big-endian architectures, such as MIPS, s390 and Sparc. Thanks to Salvatore Bonaccorso @ Debian project (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=844538) and Vladimir Marek (https://rt.cpan.org/Public/Bug/Display.html?id=118835) for reporting the issues. Fix by Pali Roh�r. Fix integer types when server side prepare statements are enabled Fixed problems: * SQL_BIGINT was incorrectly handled as 32bit MYSQL_TYPE_LONG type instead 64bit MYSQL_TYPE_LONGLONG which led to integer overflow/underflow * 32bit MYSQL_TYPE_LONG was used for perl's IV storage when IV was 64bit and 64bit MYSQL_TYPE_LONGLONG was used when IV was 32bit * All unsigned types were handled as signed, so all high positive values were treated as negative * Numeric conversions in perl which led to overflow/underflow was ignored even when mysql strict mode was enabled * Test t/41int_min_max.t was running only for normal non-prepared statements * Test t/40server_prepare.t used incorrect SQL type for big (64bit) integers ==== perl-YAML ==== Version update (1.18 -> 1.19) - updated to 1.19 see /usr/share/doc/packages/perl-YAML/Changes 1.19 Fri Nov 18 19:46:44 CET 2016 - Apply PR/164 pod (link to YAML::Shell) - Apply PR/151 Fix infinite loop for aliases without a name @bubaflub++ - Apply PR/142 Improve error messages @werekraken++ - Apply PR/162 Improve error messages - Apply PR/163 Trailing spaces after inline seq/map work now - Apply PR/154 Add test case for trailing comments @Varadinsky++ ==== phalanx ==== Version update (24 -> 25) - updated to XXV Better time management to use more time if the best move changed recently. Search improvements: Added simple ProbCut, tuned null move and LMR, simplified check evasion extension. Static evaluation bug fixes, several of them submitted by Fabrice Lecouvey, thanks. New parameter to root moves randomization, it can now be limited to first N moves of the game. New opening book generated from KingBase Lite 03/2016 (http://www.kingbase-chess.net/) ==== systemd ==== Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit udev - specfile: conflict systemd-bash-completion and systemd-mini-bash-completion Otherwise the build system detects that systemd-bash-completion and its mini variant are conflicting at files level even though those packages can't be installed on the same system. - specfile: clean up nss-* plugins descriptions and drop nss-myhostname-config script for now. Currently /etc/nsswitch.conf is supposed to be edited by the sysadmin to enable the modules. However for some reasons only nss-myhostname is removed from the conf file when the corresponding package is uninstalled. This is inconsistent so let's remove it. Actually I'm wondering if we shouldn't make those NSS plugins part of the main package and get rid of all those sub-packages... - specfile: remove old comments and unneeded sed command - specfile: no need to create systemd-update-utmp-runlevel.service symlinks anymore The symlinks in /usr/lib/systemd/system/<target>.target.wants/systemd-update-utmp-runlevel.service are created in Makefile.am since commit d5d8429a12c4b1. 'reboot' and 'poweroff' targets initially had the symlinks but there's not point since the latter conflicts shutdown.target whereas the 2 targets pull it in. See: https://github.com/systemd/systemd/pull/4429 - specfile: remove the following warnings: [ 256s] warning: File listed twice: /usr/lib/systemd/system/dbus.target.wants [ 256s] warning: File listed twice: /usr/lib/systemd/system/default.target.wants - Own a couple of directories even if they don't belong to systemd otherwise the build system will complain. Some directories (owned by others packages) are simply used by systemd to ship some scripts or config files to customize others * optional* components. Since thos components are not build required by systemd those directories are not owned by any packages and the BS complains... - Import commit 15ea716 journal-remote: change owner of /var/log/journal/remote and create /var/lib/systemd/journal-upload (bsc#1006372) - %sysusers_create and %tmpfiles_create must be called in %post Calling %pre is broken since the respective conf files are not yet installed. - %{_libexecdir}/{tmpfiles.d,sysusers.d}/systemd-remote.conf are part of systemd-journal-remote package (only). - systemd-journal-{gatewayd,remote,upload} units are only part of "systemd-journal-remote" package. So exclude them from the main package. - Import commit a1c145e6ad6588555dca64402f9103fb1e02b1a0 7f34037 man: explain that *KeyIgnoreInhibited only apply to a subset of locks df5798b Revert "logind: really handle *KeyIgnoreInhibited options in logind.conf" (bsc#1001790 bsc#1005404) f79fee7 Revert "kbd-model-map: add more mappings offered by Yast" 3760c10 manager: tighten incoming notification message checks d6efd71 core: only warn on short reads on signal fd 6eebd91 manager: be stricter with incomining notifications, warn properly about too large ones fdf2dc3 manager: don't ever busy loop when we get a notification message we can't process - Rename kbd-model-map-extra into kbd-model-map.legacy - Remove tcpd-devel build requirement. tcpwrap support has been removed since v212, see commit 7f8aa67131cfc03ddcbd31c0420754864fc122f0 - remove all dummy "aliases" to /etc/init.d (as it was already done by factory more than 1 year ago). Even if a sysvinit script is still requiring one of those dummy symlinks this should not be an issue since this is requirement is translated into a weak dependency. - specfile: - do not own /usr/share/zsh directory - do not own /etc/dbus-1 and /etc/dbus-1/system.d dirs - do not own /usr/share/dbus-1 dir - specfile: %{_prefix}/lib/systemd/system-preset was mentioned twice in %files section. - Specfile cleanup: - use curly braces with rpm macros - Specfile cleanup: - %ghost files doesn't need (anymore) to be created in %builroot - do not own /etc/X11/xorg.conf.d and /etc/X11/xinit - Specfile cleanup: no need to protect the manpages with %bootstrap condition in nss-myhostname package since the package itself is already protected. - fix nss-resolve sub package: - add a %files section - add a package description - libnss_resolve.so.2 is now part of this subpackage - add %post and %postun sections - Specfile cleanup: - reorganize some files in %files by types - some config files were missing the "noreplace" attribute - Use %config(noreplace) for %{_sysconfdir}/pam.d/systemd-user - Rework systemd-gatewayd package: - some gateway's files were still in the main package - it now includes all progs dealing with remote journals - it can be turned off (SP2 does that currently) - it's been renamed systemd-journal-remote to reflect that - Specfile cleanup: - only specify once %{_prefix}/lib/systemd/system-shutdown in %file - no need to list the content of %{_prefix}/lib/systemd/user-generators in %file - machined is not built when %bootstrap = 1 - Specfile cleanup: - There's no point in listing all generators in %file explicitly. The default is to include all of them and if for some reason one must be excluded then it should be done explicitly. - Specfile cleanup: - remove explicit call to make for building man pages. This is not needed and was maybe useful when generated doc was pre-built and shipped in the tarball. - Specfile cleanup: - break overly long and unreadable line using mkdir - gather directory creations - Stop providing udevd.8 systemd-udevd has replaced udevd for some time already and usage of udevd should be avoided. Therefore don't encourage this and stop documenting it. - Import from factory: - Thu Feb 4 11:05:37 UTC 2016 - lnussel(a)suse.de - curl also causes building of journal-upload. That one has rather unusal certificate usage, set it's ca root to /etc/pki/systemd instead of the built-in default /etc/ssl as journal-remote and journal-upload think they can put stuff in /etc/ssl/certs then but that directory is managed by p11-kit and doesn't serve the purpose those programs think. - Package rootsymlink-generator helper. It was forgotten when switching to the git repo but re-added back. That said this thing should be removed as it's broken as soon as there's no direct link between the root fs and its backend device node (i.e. BTRFS). - Add kbd-model-map-extra file which contains the additional legacy keymaps needed by yast. This was previously directly patched in the systemd source code. - Imported e251b8d7fb5c801fdfa3a023257ba0e4d514f3b0 - Re-add back /dev/root symlink generation (although this must be deprecated and finally removed). - Migrating to the Suse Systemd git repo: Third step: - Re-enable networkd (disabled by default in SLE12) - Migrating to the Suse Systemd git repo: Second step: - Import the specfile - Import the tarball generated from the git repo - Import lastest changes for the different scripts - Migrating to the Suse Systemd git repo: First step: drop all patches and drop the tar ball. The dropped patches are: fix-support-for-boot-prefixed-initscript-bnc-746506.patch set-and-use-default-logconsole.patch ensure-ask-password-wall-starts-after-getty-tty1.patch 0001-rules-block-add-support-for-pmem-devices-3683.patch Fix-run-lock-directories-permissions-to-follow-openSUSE-po.patch 1007-physical-hotplug-cpu-and-memory.patch 1066-udev-add-compatibility-links-for-truncated-by-id-links.patch watch_resolv.conf_for_become_changed.patch 0019-make-completion-smart-to-be-able-to-redirect.patch systemd-add-user-keep.patch 0001-core-re-sync-bus-name-list-after-deserializing-durin.patch systemd-228-nspawn-make-journal-linking-non-fatal-in-try-and-auto.diff avoid-random-hangs-on-timeouts-due-lost-cwd.patch 1037-udev-exclude-cd-dvd-from-block-device.patch 0001-add-network-device-after-NFS-mount-units.patch journald-advice-about-use-of-memory.patch 1011-64-btrfs.rules-skip-btrfs-check-if-devices-are-not-r.patch 1006-udev-always-rename-network.patch handle-numlock-value-in-etc-sysconfig-keyboard.patch use-rndaddentropy-ioctl-to-load-random-seed.patch 0001-pid1-don-t-return-any-error-in-manager_dispatch_noti.patch 0001-add-hdflush-for-reboot-or-hddown-for-poweroff.patch 0001-pam_systemd_do_override_XDG_RUNTIME_DIR_of_the_original_user.patch 0001-bnc888612-logind-polkit-acpi.patch avoid-divide-by-zero-sigtrap.patch 1035-99-systemd.rules-Ignore-devices-with-SYSTEMD_READY-0.patch suse-sysv-bootd-support.diff ensure-shortname-is-set-as-hostname-bnc-820213.patch parse-crypttab-for-noauto-option.patch tty-ask-password-agent-on-console.patch 0001-pid1-process-zero-length-notification-messages-again.patch handle-root_uses_lang-value-in-etc-sysconfig-language.patch 0001-core-exclude-.slice-units-from-systemctl-isolate.patch vhangup-on-all-consoles.patch 0001-systemctl-pid1-do-not-warn-about-missing-install-inf.patch apply-ACL-for-nvidia-device-nodes.patch make-emergency.service-conflict-with-syslog.socket.patch 0001-journal-warn-when-we-fail-to-append-a-tag-to-a-journ.patch 1096-new-udev-root-symlink-generator.patch 1099-Add-default-rules-for-valve-steam-controller-to-work.patch 0001-journal-set-STATE_ARCHIVED-as-part-of-offlining-2740.patch systemd-install-compat_pkgconfig-always.patch 1012-Skip-persistent-device-link-creation-on-multipath-de.patch 0001-avoid-abort-due-timeout-at-user-service.patch insserv-generator.patch apply-ACL-for-nvidia-uvm-device-node.patch restore-var-run-and-var-lock-bind-mount-if-they-aren-t-sym.patch systemd-pam_config.patch systemd-dbus-system-bus-address.patch let-linker-find-libudev-for-libdevmapper.patch 1098-systemd-networkd-alias-network-service.patch 0001-let-systemctl-completion-ignore-at-names.patch boot-local-start.patch 1095-set-ssd-disk-to-use-deadline-scheduler.patch tomcat6-var-lock-subsys-legacy.patch let-vconsole-setup-get-properties-only-once-to-copy-them.patch plymouth-quit-and-wait-for-emergency-service.patch respect-nfs-bg-option.patch 0001-If-the-notification-message-length-is-0-ignore-the-m.patch 1062-rules-set-default-permissions-for-GenWQE-devices.patch rescue-emergency-target-conflicts.patch Correct_assert_on_unexpected_error_code.patch 1097-udevd-increase-maximum-number-of-children.patch 0001-core-fix-bus-name-synchronization-after-daemon-reloa.patch 1005-create-default-links-for-primary-cd_dvd-drive.patch allow-multiple-sulogin-to-be-started.patch systemd-230-cgroup2-use-new-fstype-for-unified-hierarchy.patch 0010-do-not-install-sulogin-unit-with-poweroff.patch 1003-udev-netlink-null-rules.patch 1002-rules-create-by-id-scsi-links-for-ATA-devices.patch 0001-nss-mymachines-do-not-allow-overlong-machine-names.patch shut-up-rpmlint-on-var-log-journal.patch systemd-tmp-safe-defaults.patch portmap-wants-rpcbind-socket.patch hostname-NULL.patch 0001-pid1-more-informative-error-message-for-ignored-noti.patch 0001-journal-fix-HMAC-calculation-when-appending-a-data-o.patch handle-disable_caplock-and-compose_table-and-kbd_rate.patch kbd-model-map.patch systemctl-set-default-target.patch 0014-journald-with-journaling-FS.patch 0001-On_s390_con3270_disable_ANSI_colour_esc.patch ==== vim ==== Version update (8.0.45 -> 8.0.92) Subpackages: gvim vim-data - Export "TERM=linux" before running the test suite: vim does quite an extensive test relying on a full fledged terminal inside OBS, stdio is redirected to a serial console (where the build log is being recorded/extracted. Systemd set non-local tty by default to vt220 in upcoming versions (which the vi test suite fails to run on; this should be considered a vim bug). - Updated to revision 92, fixes the following problems * Using NUL instead of NULL. * Crash when using the preview window from an unnamed buffer. (lifepillar) * On Windows job_stop() stops cmd.exe, not the processes it runs. (Linwei) * When a match ends in part of concealed text highlighting, it might mess up concealing by resetting prev_syntax_id. * An exiting job is detected with a large latency. * New code for job_stop() breaks channel test on AppVeyor. * Conceal test passes even without the bug fix. * No test for what 8.0.0047 fixes. * On Windows job_stop() stops cmd.exe, not the processes it runs. (Linwei) * Minor comment and style deficiencies. * When setting 'filetype' there is no check for a valid name. * Tests fail without the 'keymap' features. * Positioning of the popup menu is not good. * Vim does not build on VMS systems. * When using an Ex command for 'keywordprg' it is escaped as with a shell command. (Romain Lafourcade) * Compiler warning for unused variable. * No digraph for HORIZONTAL ELLIPSIS. * Compiler warning for comparing with unsigned. (Zoltan Arpadffy) * Normal test fails on MS-Windows. * Compiler warning for unused function in tiny build. (Tony Mechelynck) * when calling an operator function when 'linebreak' is set, it is internally reset before calling the operator function. * VMS has a problem with infinity. * Checking did_throw after executing autocommands is wrong. (Daniel Hahler) * Compiler warning for self-comparison. * Tests referred in Makefile that no longer exist. * Exit value from a shell command is wrong. (Hexchain Tong) * MS-Windows: Crash with long font name. (Henry Hu) * More comparisons between firstwin and lastwin. * Cannot make Vim fail on an internal error. * Using number for exception type lacks type checking. * Channel log has double parens ()(). * The GUI code is not tested by Travis. * Accessing freed memory in quickfix. * Accessing freed memory in quickfix. (Domenique Pelle) * The OS X build fails on Travis. * Inconsistent function names. * Extension for configure should be ".ac". * Using freed memory with win_getid(). (Domenique Pelle) * Using freed memory when adding to a quickfix list. (Domenique Pelle) * Using freed memory with recursive function call. (Dominique Pelle) * Cannot add a comment after ":hide". (Norio Takagi) * When the channel callback gets job info the job may already have been deleted. (lifepillar) * When a test fails in Setup or Teardown the problem is not reported. * Various problems with GTK 3.22.2. * Cursor moved after last character when using 'breakindent'. * Test_help_complete sometimes fails in MS-Windows console. * C indenting does not support nested namespaces that C++ 17 has. - Drop bsc-1008800.patch, fixed upstream. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Widevine plugin for chromium fails to show Amazon Video
by Daniel Morris 23 Nov '16

23 Nov '16

Has anyone used the Widevine plugin for Chromium (from the Packman repo) successfully with either Tumbleweed or Leap 42.2 to watch Amazon Video? On both systems I get video error codes suggesting lack of bandwith, plausible at ~5Mbps/WiFi, unlikely at 78Mbps/wired. Other proprietary devices are quite happy, even at the meagre ADSL speeds over WiFi. I've also tried setting the 'Always allowed to run' checkbox in chrome://plugins for Widevine Content Decryption Module. Has anyone had success with getting licensed content to play? Daniel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] New Tumbleweed snapshot 20161121 released!
by Dominique Leuenberger 23 Nov '16

23 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: cmake (3.6.2 -> 3.7.0) installation-images-openSUSE (14.277 -> 14.278) kernel-source (4.8.8 -> 4.8.9) konsole kpackage mono-core (4.6.1 -> 4.6.2) mxml (2.9 -> 2.10) patterns-openSUSE plasma5-openSUSE wicked (0.6.38 -> 0.6.39) yast2-hardware-detection (3.1.7 -> 3.1.8) === Details === ==== cmake ==== Version update (3.6.2 -> 3.7.0) - Do not mix tabs and spaces in cmake.prov - use libuv which is shipped in CMake's tarball for older systems that do not provide this lib on their own ==== installation-images-openSUSE ==== Version update (14.277 -> 14.278) - removed double documentation page for README - enabled "edit on github" button on the doc pages - 14.278 ==== kernel-source ==== Version update (4.8.8 -> 4.8.9) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Linux 4.8.9 (: :). - commit be1f097 ==== konsole ==== Subpackages: konsole-part - Add only-use-foreground-process-info-if-valid.patch, should fix "random" crashes (kde#372401, kde#372620, kde#372619, kde#372593) - Add fix-reparsing-of-command-line-arguments.patch to make konsole properly parse the command line options on start when an instance is already running, and not just reuse them from the already running instance (boo#1010890, kde#371863) ==== kpackage ==== Subpackages: kpackage-devel - Add 0001-keep-installing-metadata-desktop.patch to keep installing metadata.desktop (kde#372594) ==== mono-core ==== Version update (4.6.1 -> 4.6.2) Subpackages: libmono-2_0-1 libmono-2_0-devel libmonosgen-2_0-1 libmonosgen-2_0-devel mono-data mono-data-sqlite mono-extras mono-mvc mono-wcf mono-web mono-winforms mono-winfxcore - Update to version 4.6.2 (service release) * bxc#44708 - TrustFailure when attempting to access HTTPS servers on ports other than 443 * bxc#39832 - SIGSEGV when running roslyn ==== mxml ==== Version update (2.9 -> 2.10) Subpackages: libmxml1 - update to version 2.10 - The version number in mxml.h was wrong (Bug #532) - The mxml.spec file was out of date (Bug #521) - Mini-XML no longer allows malformed element names (Bug #509) - mxmlLoad* and mxmlSAXLoad* did not properly create text nodes when MXML_TEXT_CALLBACK was specified (Bug #531) - mxmlDelete used a recursive algorithm which could require large amounts of stack space depending on the file (Bug #549, CVE-2016-4570) (bnc #979205) - mxmlWrite* used a recursive algorithm which could require large amounts of stack space depending on the file (Bug #549, CVE-2016-4571) (bnc #979206) ==== patterns-openSUSE ==== Subpackages: patterns-openSUSE-apparmor patterns-openSUSE-apparmor_opt patterns-openSUSE-base patterns-openSUSE-books patterns-openSUSE-console patterns-openSUSE-devel_C_C++ patterns-openSUSE-devel_basis patterns-openSUSE-devel_ide patterns-openSUSE-devel_java patterns-openSUSE-devel_kde patterns-openSUSE-devel_kde_frameworks patterns-openSUSE-devel_kernel patterns-openSUSE-devel_osc_build patterns-openSUSE-devel_perl patterns-openSUSE-devel_python patterns-openSUSE-devel_qt5 patterns-openSUSE-devel_rpm_build patterns-openSUSE-devel_ruby patterns-openSUSE-devel_web patterns-openSUSE-dhcp_dns_server patterns-openSUSE-directory_server patterns-openSUSE-enhanced_base patterns-openSUSE-enhanced_base_opt patterns-openSUSE-file_server patterns-openSUSE-fonts patterns-openSUSE-fonts_opt patterns-openSUSE-games patterns-openSUSE-gateway_server patterns-openSUSE-generic_server patterns-openSUSE-gnome patterns-openSUSE-gnome_admin patterns-openSUSE-gnome_basis patterns-openSUSE-gnome_basis_opt patterns-openSUSE-gnome_games patterns-openSUSE-gnome_ide patterns-openSUSE-gnome_imaging patterns-openSUSE-gnome_imaging_opt patterns-openSUSE-gnome_internet patterns-openSUSE-gnome_laptop patterns-openSUSE-gnome_multimedia patterns-openSUSE-gnome_multimedia_opt patterns-openSUSE-gnome_office patterns-openSUSE-gnome_office_opt patterns-openSUSE-gnome_utilities patterns-openSUSE-gnome_yast patterns-openSUSE-imaging patterns-openSUSE-imaging_opt patterns-openSUSE-kde patterns-openSUSE-kde_edutainment patterns-openSUSE-kde_games patterns-openSUSE-kde_ide patterns-openSUSE-kde_imaging patterns-openSUSE-kde_internet patterns-openSUSE-kde_multimedia patterns-openSUSE-kde_office patterns-openSUSE-kde_plasma patterns-openSUSE-kde_telepathy patterns-openSUSE-kde_utilities patterns-openSUSE-kde_utilities_opt patterns-openSUSE-kde_yast patterns-openSUSE-kvm_server patterns-openSUSE-lamp_server patterns-openSUSE-laptop patterns-openSUSE-lxde patterns-openSUSE-lxde_laptop patterns-openSUSE-lxd e_office patterns-openSUSE-mail_server patterns-openSUSE-minimal_base patterns-openSUSE-minimal_base-conflicts patterns-openSUSE-misc_server patterns-openSUSE-multimedia patterns-openSUSE-multimedia_opt patterns-openSUSE-network_admin patterns-openSUSE-non_oss patterns-openSUSE-non_oss_opt patterns-openSUSE-office patterns-openSUSE-office_opt patterns-openSUSE-print_server patterns-openSUSE-remote_desktop patterns-openSUSE-rest_dvd patterns-openSUSE-sw_management patterns-openSUSE-sw_management_gnome patterns-openSUSE-sw_management_kde patterns-openSUSE-tabletpc patterns-openSUSE-technical_writing patterns-openSUSE-x11 patterns-openSUSE-x11_opt patterns-openSUSE-x11_yast patterns-openSUSE-xen_server patterns-openSUSE-xfce patterns-openSUSE-xfce_basis patterns-openSUSE-xfce_laptop patterns-openSUSE-xfce_office patterns-openSUSE-yast2_basis patterns-openSUSE-yast2_install_wf - Fix spelling of Enlightenment boo#1010967 ==== plasma5-openSUSE ==== Subpackages: plasma5-defaults-openSUSE plasma5-theme-openSUSE plasma5-workspace-branding-openSUSE sddm-theme-openSUSE - sddm-theme-openSUSE should require plasma5-workspace, the breeze theme doesn't work without it ==== wicked ==== Version update (0.6.38 -> 0.6.39) Subpackages: libwicked-0-6 wicked-service - version 0.6.39 - dhcp: suport to define and request custom options (bsc#988954), documented in wicked-config(5) and ifcfg-dhcp(5) manual pages. - dhcp6: fix refresh on newprefix workaround (boo#972471) - dhcp4: do not fail in capture on link type change (bsc#975466) - dhcp4: ignore invalid options, do not discard complete message (https://github.com/openSUSE/wicked/issues/671) - dhcp4: log and add sender (server or relay) ethernet hw-address to the lease (https://github.com/openSUSE/wicked/issues/663) - ifdown: show reasons to skip an action (bsc#997027) - ifconfig: fix to consider address scope in dbus model (bsc#988794) - bonding: set the primary slave in the master at enslave of the primary when it were not yet ready while bond setup (bsc#998413) - removed patch included in this version [- 0001-dhcp-fixed-to-properly-append-dhcp-option-data.patch] ==== yast2-hardware-detection ==== Version update (3.1.7 -> 3.1.8) - parse new entry for permanent mac address (bsc#1007172) - 3.1.8 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] LibreOffice offline help missing
by Peter Mc Donough 22 Nov '16

22 Nov '16

Hi, Somehow LibreOffice's offline help seems to be missing. German version, current Tumbleweed. Anything I could do locally? cu Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] broken shasums for 42.2 isos?
by Felix Miata 22 Nov '16

22 Nov '16

sdm composed on 2016-11-21 07:28 (UTC-0800): ... > Run this command: `sha256sum -c openSUSE-Leap-42.2-NET-x86_64.iso.sha256` > The output should say: > openSUSE-Leap-42.2-NET-x86_64.iso: OK > sha256sum: WARNING: 14 lines are improperly formatted > The "OK" is letting you know that the checksum passed. The improperly > formatted error message about line 14 can be ignored... The complete output in the OP masks what may seem to be an additional error. That's what happened to me, and the reason why I bothered take the trouble to ask. I'm used to using md5sum, having always chosen it over shasum when both were offered. As is typical for me attempting use of of example-free man pages, I was unable to discover syntax that corresponds to the 'md5sum -c filename.md5' syntax I was used to. IOW, this was my first attempt to use shasum. Not only did I see a bunch of error lines overpowering the single OK line, but the command returned in a tiny fraction of the time I expected it to take, nearly instantly, compared to a patience testing length of an md5sum process used upon a dvd .iso. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

RE: RE: Re: [opensuse-factory] Leap 42.2 incorrect checksum?
by stakanov＠freenet.de 22 Nov '16

22 Nov '16

> -----Ursprüngliche Nachricht----- > Von: stakanov(a)freenet.de > Gesendet: So. 20.11.2016 23:35 > An: opensuse-factory(a)opensuse.org > Betreff: RE: Re: [opensuse-factory] Leap 42.2 incorrect checksum? > > > >> -----Ursprüngliche Nachricht----- >> Von: Carlos E. R. > >> >> Finally, report the bug in the page. >> >> -- >> Cheers / Saludos, >> >> Carlos E. R. >> (from 13.1 x86_64 "Bottle" at Telcontar) >> >> >> >> -----Ursprüngliche Nachricht Ende----- > > Well, I know for sure to work around it. But good idea the last point. > Bugzilla – Bug 1011175 > This is actually the link on the website: aria2c http://download.opensuse.org/distribution/leap/42.2/iso/openSUSE-Leap-42.2-… [#ab772c 0B/0B CN:1 DL:765KiB] 11/20 23:41:36 [NOTICE] Scaricamento completato: /home/entropia/openSUSE-Leap-42.2-DVD-x86_64.iso.meta4 11/20 23:41:37 [ERROR] CUID#8 - Download aborted. URI=http://download.opensuse.org/distribution/leap/42.2/iso/openSUSE-Leap-4… Exception: [AbstractCommand.cc:350] errorCode=8 URI=http://ftp1.nluug.nl/os/Linux/distr/opensuse/distribution/leap/42.2/iso/openSUSE-Leap-42.2-DVDiso.torrent -> [HttpResponse.cc:90] errorCode=8 Invalid range header. Request: 0-548143103/4384096256, Response: 0-42137/42138 For some reason I cannot access the bug I reported, so I cannot join it. --- Die Bundesliga hat begonnen! Alle Tore, alle Ergebnisse, alle News: Pocket Liga jetzt im https://app.adjust.com/dpynzd oder https://app.adjust.com/dpynzd herunterladen - kostenlos! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

[opensuse-factory] New Tumbleweed snapshot 20161120 released!
by Dominique Leuenberger 21 Nov '16

21 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: dasher mozilla-nspr perl-DBD-SQLite (1.50 -> 1.52) perl-Log-Log4perl (1.47 -> 1.48) perl-XML-XPath (1.39 -> 1.40) polari (3.22.1 -> 3.22.2) rubygem-gem2rpm === Details === ==== dasher ==== Subpackages: dasher-data-extras dasher-data-recommended dasher-lang - Fix some typos in the language code mapping. - Upgrade .spec.in file to produce the correct spec file. ==== mozilla-nspr ==== - Properly run testsuite ==== perl-DBD-SQLite ==== Version update (1.50 -> 1.52) - updated to 1.52 see /usr/share/doc/packages/perl-DBD-SQLite/Changes 1.52 2016-11-15 - Switched to a production version. 1.51_07 2016-10-16 - Downgraded SQLite to 3.13.0 (RT#118395) 1.51_06 2016-10-15 - Updated SQLite to 3.15.0 1.51_05 2016-06-23 - Updated SQLite to 3.13.0 - Resolved #115465: column_info doesn't parse sizes with spaces (ilmari++) - Added two missing function declarations (rurban++) 1.51_04 2016-03-07 - Updated SQLite to 3.11.1, which fixed an FTS5 index corruption issue 1.51_03 2016-02-20 - No code change - Resolved #112220: t/62_regexp_multibyte_char_class.t fails for perl >= 5.22.0 and non-utf8 locale (SREZIC++) 1.51_02 2016-02-20 - No code change; fixed a newly added test that only passed under recent perls (>= 5.18) 1.51_01 2016-02-20 * ** CHANGES THAT MAY POSSIBLY BREAK YOUR OLD APPLICATIONS *** - Updated to SQLite 3.11.0. As upstream disabled two-arg fts3_tokenizer() for security concern, DBD::SQLite also stopped enabling it by default. If you do need perl tokenizer, compile/install with SQLITE_ENABLE_FTS3_TOKENIZER environmental variable. - Applied a doc patch by Salvatore Bonaccorso - Enabled (experimental) FTS5 - Fixed REGEXP function to work under sqlite_unicode correctly (Andr�s Farkas++) ==== perl-Log-Log4perl ==== Version update (1.47 -> 1.48) - updated to 1.48 see /usr/share/doc/packages/perl-Log-Log4perl/Changes 1.48 (2016/11/14) * (ms) [rt.cpan.org #117377] Moved PatternLayout's documentation of DateFormat features to DateFormat.pm to avoid duplication and keep the two parts consistent, as suggested by Max Carey. * (ms) [rt.cpan.org #114822] Split two lines with CVS-sensitive $Log.. variables into two parts. * (ms) Semaphore issue fixed in Synchronized (reported by Siarhei Kuchynski and Martin K�hler): https://github.com/mschilli/log4perl/issues/72 * (ms) header_text now works with syswrite (reported by Tom Metro): https://github.com/mschilli/log4perl/issues/73 ==== perl-XML-XPath ==== Version update (1.39 -> 1.40) - updated to 1.40 see /usr/share/doc/packages/perl-XML-XPath/Changes 1.40 2016-11-13 MANWAR - Proposed fix for RT #118726. ==== polari ==== Version update (3.22.1 -> 3.22.2) Subpackages: typelib-1_0-Polari-1_0 - Update to version 3.22.2: + Fix glitch when opening user list. + Fix launching through mission control. + Updated translations. - Drop polari-run-as-background-service.patch: fixed upstream. ==== rubygem-gem2rpm ==== - fix gem2rpm --fetch: prefer https for accessing rubygems.org (bnc #963710) adds 0026-use-https-instead-of-http-for-rubygems.org.patch - added support for 2.4.0 - dropped all patches and replaced them with git format-patch series: - modified: 0001-use-the-ID-from-os-release-to-use-the-proper-templat.patch 0002-added-basic-config-file-support-to-gem2rpm-in-yaml-f.patch 0003-new-opensuse-templates.-they-require-the-config-file.patch 0004-added-example-gem2rpm.yml.patch 0005-properly-shorten-description-and-summary.patch 0006-Preserve-the-license-header-found-in-the-output-file.patch 0007-fixes-for-the-opensuse-template.patch 0008-do-not-use-not-.-not-supported-on-1.8-e.g.patch 0009-No-longer-require-the-ruby-version-inside-the-subpac.patch 0010-Try-to-load-rbconfigpackagingsupport-and-fail-gracef.patch 0011-Add-support-for-scripts-pre-post-for-subpackages.patch 0012-typo-in-gem2rpm.yml.documentation-custom_pkgs-instea.patch 0013-Also-tag-LICENSE-MIT-as-docfile.patch 0014-Refactor-into-multiple-lines.patch 0015-Add-licence-to-the-list-of-license-files-as-well.patch 0016-add-two-more-ways-to-express-changes.patch - dropped: 0017-touch-unpacked-sources.patch 0001-Also-tag-APACHE-LICENSE-2.0-as-docfile.patch - newly added: 0017-.markdown-is-also-seen-in-the-wild.patch 0018-Only-use-the-extensions-doc-dir-on-MRI-2.1.x.patch 0019-Cleaner-solution-for-the-extensions-doc-dir.patch 0020-Ruby-1.8-insists-on-the-for-the-parameter.patch 0021-Fix-company-name-in-copyright-header.patch 0022-add-the-touch-for-build-compare-to-the-template.patch 0023-Also-tag-APACHE-LICENSE-2.0-as-docfile.patch 0024-add-ability-to-provide-alternative-main-Source.patch 0025-allow-running-commands-after-patching.patch - added :post_patch hook to run commands before we rebuild the gem used by libv8 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] [42.2] libdwarf
by Mikhail Kasimov 21 Nov '16

21 Nov '16

Hello! https://software.opensuse.org/package/libdwarf openSUSE Tumbleweed official release 20150115 32 Bit 64 Bit Source 1 Click Install Show unstable packages openSUSE Leap 42.2 <--------------------- no libdwarf version in official release 42.2 repo. Bug or something else? Show unstable packages openSUSE Leap 42.1 official release 20150115 32 Bit 64 Bit Source 1 Click Install -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] New Tumbleweed snapshot 20161118 released!
by Dominique Leuenberger 21 Nov '16

21 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: aria2 (1.28.0 -> 1.29.0) libvirt logrotate open-iscsi perl-DBD-mysql (4.037 -> 4.039) perl-JSON-XS (3.02 -> 3.03) perl-Log-Dispatch (2.57 -> 2.58) python-ldap (2.4.27 -> 2.4.28) python-pyOpenSSL (16.0.0 -> 16.2.0) python3-cffi (1.8.3 -> 1.9.1) whois (5.2.12 -> 5.2.13) wireshark (2.2.1 -> 2.2.2) === Details === ==== aria2 ==== Version update (1.28.0 -> 1.29.0) Subpackages: aria2-lang libaria2-0 - Update to version 0.29.0: * WinTLS: Fix busy loop on write error * Support 1xx non-final response * Update wslay * Don't download piece which is filtered out (e.g., --select-file) ==== libvirt ==== Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - spec: explicitly set qemu-bridge-helper path to /usr/lib/ bsc#999070 ==== logrotate ==== - Move logrotate.status to /var/lib/misc following FHS/LSB and making implementing read-only root filesystem much easier. [FATE#322036] - Add patch: * logrotate-var-lib-misc.patch ==== open-iscsi ==== Subpackages: iscsiuio - Updated to upstream version 2.0-874, but still includes (very few) SUSE-specific changes. This replaced the 2.0-873 tarball with a 2.0-874 tarball, but still includes the Factory-latest compressed diff patch file, though it is now empty. See Changes file for functional change details. ==== perl-DBD-mysql ==== Version update (4.037 -> 4.039) - updated to 4.039 see /usr/share/doc/packages/perl-DBD-mysql/Changes 2016-11-15 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.039) * Fix for security issue Out-of-bounds read by DBD::mysql CVE-2016-1249 (pali) 2016-10-30 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.038_01) * Fix compilation of embedded server (pali) (https://github.com/perl5-dbi/DBD-mysql/pull/68) * Fix compilation against libmariadbclient. First version by H.Merijn Brand, improved by Bernt Johnsen @ Oracle. * For efficiency use newSVpvn() instead newSVpv() where possible (pali) * Correctly coerce fetched scalar values when mysql_server_prepare is not used (pali) * Add support for fetching columns of BIT type with mysql_server_prepare = 1 (pali) Fixes https://rt.cpan.org/Public/Bug/Display.html?id=88006 * Use correct format in printf instead of casting variable types (pali) * Include errno.h for MYSQL_ASYNC because it uses errno variable (pali) * Travis: also test on perl 5.22 and 5.24. - updated to 4.038 see /usr/share/doc/packages/perl-DBD-mysql/Changes 2016-10-19 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.038) * Version 4.037_1 had fixes for MySQL 8.0 provided Bernt Johnsen @ Oracle that were not in the Changelogs (https://github.com/perl5-dbi/DBD-mysql/pull/56) * Fixes for compiling against newer libmysqlclient on Windows (kmx) * Fix unit test for 40server_prepare_crash on Windows (pali) * Perl's IV in scalar can store 64bit integer when perl was compiled with 64 bit support (default on 64bit linux with gcc). Use this feature and stores MYSQL_TYPE_LONGLONG as integers instead of strings when possible. (pali, https://github.com/perl5-dbi/DBD-mysql/pull/57) 2016-10-14 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.037_01) * Newest versions of libmysqlclient and the MariaDB C connector no longer export the __WIN__ macro. If this macro is not present we would not compile in the poll.h-based async-support. Changed to use the _WIN32 macro instead. Thanks to Sergei Golubchik for suggesting the fix. * Fix from Pali Roh�r to not use unsafe sprintf with variable lengt, changes to bind logic, and added test 40server_prepare_crash. ==== perl-JSON-XS ==== Version update (3.02 -> 3.03) - updated to 3.03 see /usr/share/doc/packages/perl-JSON-XS/Changes TODO: rfc7464 TODO: Victor Efimov 3.03 Wed Nov 16 20:20:59 CET 2016 - fix a bug introduced by a perl bug workaround that would cause incremental parsing to fail with a sv_chop panic. - json_xs: toformat failure error message fixed. - json_xs: allow cyclic data structures in CBOR. ==== perl-Log-Dispatch ==== Version update (2.57 -> 2.58) - updated to 2.58 see /usr/share/doc/packages/perl-Log-Dispatch/Changes 2.58 2016-11-13 - Switched from RT to the GitHub issue tracker. ==== python-ldap ==== Version update (2.4.27 -> 2.4.28) - Update to upstream release 2.4.28 ==== python-pyOpenSSL ==== Version update (16.0.0 -> 16.2.0) - fix source url - Change source url to pypi.io * version 16.2.0 source tarball failed to download from pypi.python.org - Update to 16.2.0 * Deprecations * * Dropped support for OpenSSL 0.9.8. * Changes * * Fix memory leak in OpenSSL.crypto.dump_privatekey() with FILETYPE_TEXT. #496 * * Enable use of CRL (and more) in verify context. #483 * * OpenSSL.crypto.PKey can now be constructed from cryptography objects and also exported as such. #439 * * Support newer versions of cryptography which use opaque structs for OpenSSL 1.1.0 compatibility. * * Fixed compatibility errors with OpenSSL 1.1.0. * * Fixed an issue that caused failures with subinterpreters and embedded Pythons. [#552] ==== python3-cffi ==== Version update (1.8.3 -> 1.9.1) - update to version 1.9.1: (no changelog available) - changes from version 1.9: * Structs with variable-sized arrays as their last field: now we track the length of the array after ffi.new() is called, just like we always tracked the length of ffi.new("int[]", 42). This lets us detect out-of-range accesses to array items. This also lets us display a better repr(), and have the total size returned by ffi.sizeof() and ffi.buffer(). Previously both functions would return a result based on the size of the declared structure type, with an assumed empty array. (Thanks andrew for starting this refactoring.) * Add support in cdef()/set_source() for unspecified-length arrays in typedefs: typedef int foo_t[...];. It was already supported for global variables or structure fields. * I turned in v1.8 a warning from cffi/model.py into an error: 'enum xxx' has no values explicitly defined: refusing to guess which integer type it is meant to be (unsigned/signed, int/long). Now I?m turning it back to a warning again; it seems that guessing that the enum has size int is a 99%-safe bet. (But not 100%, so it stays as a warning.) * Fix leaks in the code handling FILE * arguments. In CPython 3 there is a remaining issue that is hard to fix: if you pass a Python file object to a FILE * argument, then os.dup() is used and the new file descriptor is only closed when the GC reclaims the Python file object?and not at the earlier time when you call close(), which only closes the original file descriptor. If this is an issue, you should avoid this automatic convertion of Python file objects: instead, explicitly manipulate file descriptors and call fdopen() from C (...via cffi). ==== whois ==== Version update (5.2.12 -> 5.2.13) - whois 5.2.13: * Use "domain" instead of "=" for default verisign-grs queries, to ignore the name server names spam. * Fixed make_ip_del_recovered.pl, which generated non-functioningi data. * Added the .xn--90ae (??, Bulgaria) TLD server. * Updated the .bd, .jobs and .mobi TLD servers. * Added new ASN allocations. * Added new recovered IPv4 allocations. * Updated the crsnic.net hiding string to fix hiding for .bi. * Updated the list of new gTLDs. ==== wireshark ==== Version update (2.2.1 -> 2.2.2) Subpackages: wireshark-ui-gtk - Wireshark 2.2.2: * CVE-2016-9372: Profinet I/O long loop (boo#1010807) * CVE-2016-9374: AllJoyn crash (boo#1010752) * CVE-2016-9376: OpenFlow crash (boo#1010735) * CVE-2016-9373: DCERPC crash (boo#1010754) * CVE-2016-9375: DTN infinite loop (boo#1010740) * Further bug fixes and updated protocol support as listed in: https://www.wireshark.org/docs/relnotes/wireshark-2.2.2.html -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] Problem with TW/Gnome in VirtualBox VM
by Larry Finger 21 Nov '16

21 Nov '16

Following the 20161112 snapshot, X failed to start in a Tumbleweed Gnome virtual machine. The companion KDE VM continued to work correctly. To test if this was some kind of glitch in my local code, I downloaded and booted the Live-Gnome iso for the 20161119 snapshot. Again, no X. Upon investigation, the dmesg log showed the following: gnome-session-f[5487]: segfault at 0 ip 00007f97e7c8c0f9 sp 00007fff86ee0560 error 4 in libgtk-3.so.0.2200.3[7f97e799d000+700000] I have no real TM machine in which to debug this. This is reported as b.n.c.#1011471. Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Package up for grabs: python[3]-qt5
by Luca Beltrame 21 Nov '16

21 Nov '16

Hello, PyQt5 has been lagging behind in TW recently, and personally I have lost any interest in it, so I am not following much its development. On the same topic, the currently-set maintainer (which is not me) sent the last SR several months ago, and left it open after it got declined (. I have sent the latest version to TW, but I would like someone to (co) maintain this piece of software as neither me nor the current maintainer seem able to keep up. So... any takers? ;)

2 2

[opensuse-factory] broken shasums for 42.2 isos?
by Felix Miata 21 Nov '16

21 Nov '16

wget http://download.opensuse.org/distribution/leap/42.2/iso/openSUSE-Leap-42.2-… wget http://download.opensuse.org/distribution/leap/42.2/iso/openSUSE-Leap-42.2-… shasum -c openSUSE-Leap-42.2-NET-x86_64.iso.sha256 openSUSE-Leap-42.2-NET-x86_64.iso: OK shasum: WARNING: 14 lines are improperly formatted Is this expected? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 13