December 2015 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Warning, re: New Tw snapshot 20151221
by Patrick Shanahan 26 Dec '15

26 Dec '15

Changing runlevels -> multi-user <-> graphical looses network connection if using wicked systemctl restart wicked wickedd network -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 2

[opensuse-factory] horrific sound configuration process in TW
by Felix Miata 26 Dec '15

26 Dec '15

more than 5 hours trying success after success on same machine in 13.1 13.2 42.1 Mageia 5 Only in Mageia was sound actually easy to configure (via MCC). 42.1 was only slightly harder (via YaST2). 13.2 was quite hard, required replacing phonon-backend-vlc with phonon-backend-gstreamer. 13.1 wouldn't work either, seemed to have same only temporarily and only in yast2 behavior/obstacle as TW until after replacing phonon-backend-vlc with phonon-backend-gstreamer and a reboot. I tried TW for a while without Packman enabled, later enabled it to try to install SMPlayer and VLC. At first I excluded all *pulse*. In desktop settings -> phonon audio & video, the only sound device listed is default, no mention of any intel device as in other releases or yast2. Deleting Intel 82801G (ICH7 Family) AC'97 Audio Controller (rev 01) and re-adding it either quick or normal in YaST2 always produces sound when configuring, but it doesn't survive reboot, and never works in K*5 or SMPlayer. Eventually I tried advanced, including a click on reset, instead of quick or normal, and it has stuck so far through two reboots. One possible clue: nothing providess libdbus-1.so.3(LIBDBUS_1_3)(64bit) needed by vlc-noX-2.2.1-299.1.x86_64, which remains even after getting KDE to produce sound. SMPlayer still plays video only. :~( https://en.opensuse.org/SDB:Audio_troubleshooting is ancient. Selected rpms installed: alsa-1.1.0-1.1.x86_64 alsa-firmware-1.0.29-1.1.noarch alsa-oss-1.0.28-3.3.x86_64 alsa-plugins-1.1.0-1.1.x86_64 alsa-plugins-pulse-1.1.0-1.1.x86_64 alsa-utils-1.1.0-1.2.x86_64 dbus-1-1.8.20-1.1.x86_64 dbus-1-glib-0.104-1.2.x86_64 dbus-1-python-1.2.0-6.5.x86_64 dbus-1-python3-1.2.0-6.5.x86_64 dbus-1-x11-1.8.20-1.1.x86_64 gstreamer-0_10-0.10.36-18.3.x86_64 gstreamer-0_10-plugins-base-0.10.36-13.1.x86_64 gstreamer-1.6.1-1.1.x86_64 gstreamer-plugins-base-1.6.1-1.1.x86_64 kdbusaddons-tools-5.16.0-1.1.x86_64 libdbus-1-3-1.8.20-1.1.x86_64 libdbus-1-3-32bit-1.8.20-1.1.x86_64 libdbusmenu-qt2-0.9.2+14.04.20131209-3.3.x86_64 libdbusmenu-qt5-2-0.9.3+15.10.20150604-1.1.x86_64 libgstreamer-0_10-0-0.10.36-18.3.x86_64 libgstreamer-1_0-0-1.6.1-1.1.x86_64 libpulse0-7.1-1.1.x86_64 libpulse-mainloop-glib0-7.1-1.1.x86_64 phonon-backend-gstreamer-4.8.2-2.1.x86_64 pulseaudio-7.1-1.1.x86_64 ruby2.1-rubygem-ruby-dbus-0.11.0-4.3.x86_64 ruby2.2-rubygem-ruby-dbus-0.11.0-4.3.x86_64 system-config-printer-dbus-service-1.5.7-5.1.noarch -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/

5 31

[opensuse-factory] What's the best alternative to Multisystem?
by Chan Ju Ping 24 Dec '15

24 Dec '15

Unfortunately, the Multisystem program that allows one to easily create a USB drive with multiple live-ISO images can only be installed on Debian-based systems. http://liveusb.info/dotclear/index.php?pages/install Is there an alternative for rpm-based systems anyone can recommend that also allows one to easily install and run multiple ISOs on a USB drive?

5 17

[opensuse-factory] Leap debug repo out of sync
by Darin Perusich 24 Dec '15

24 Dec '15

Hello All, Konsole started throwing a Bus Error on me yesterday so I enabled the debug repos and installed konsole-debuginfo package to debug the issue and gdb tells me the wrong version is installed and to install konsole-debuginfo-15.08.3-3.1.x86_64, yet only konsole-debuginfo-15.08.2-1.1.x86_64 is available in the update repo. A quick google search of konsole-debuginfo-15.08.3-3.1.x86_64 shows the package is in a few of the update/leap/42.1-test/ mirrors, but I'm guessing these are out of sync. I don't know how prevalent this is, but wanted to bring it to someones attention. -- Later, Darin -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Leap:42.1 kid3 is built against qt4/kde4
by Dave Plater 24 Dec '15

24 Dec '15

Hi, I've discovered that kid3 in Leap was built against kde4/qt4 due to a "%if %{suse_version} > 1320" without the extra " || 0%{?suse_version} == 1315 && 0%{?is_opensuse} == 1" which is what's needed to include kf5/qt5 in the build. This means that a Leap user with kde5 will pull in unnecessary packages and kid3 won't appear as it should. I've fixed this and it's on it's way to factory but does this warrant a Leap:42.1 update? Regards Dave Plater -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] New Tumbleweed snapshot 20151221 released!
by Ludwig Nussel 23 Dec '15

23 Dec '15

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Packages changed: ImageMagick (6.9.2.4 -> 6.9.2.8) amarok apache-commons-collections (3.2.1 -> 3.2.2) apache2-mod_dnssd atril (1.12.1 -> 1.12.2) bash-completion calligra chromaprint gegl-unstable graphite2 (1.3.2 -> 1.3.3) grub2 hylafax+ kcm5-fcitx latex2html (2012 -> 2015) libaccounts-glib libdmapsharing libgit2-glib (0.23.6 -> 0.23.8) libpng12 (1.2.55 -> 1.2.56) libreoffice (5.0.3.2 -> 5.0.4.2) libvirt-glib (0.2.2 -> 0.2.3) menu-cache (1.0.0 -> 1.0.1) openvpn poppler (0.38.0 -> 0.39.0) poppler-qt (0.38.0 -> 0.39.0) poppler-qt5 (0.38.0 -> 0.39.0) python-keyring (5.4 -> 5.7) systemd-presets-branding-openSUSE tigervnc ucode-intel viewnior (1.5 -> 1.6) virt-viewer (2.0 -> 3.0) wine (1.8~rc3 -> 1.8) === Details === ==== ImageMagick ==== Version update (6.9.2.4 -> 6.9.2.8) Subpackages: ImageMagick-devel ImageMagick-doc ImageMagick-extra libMagick++-6_Q16-6 libMagickCore-6_Q16-2 libMagickWand-6_Q16-2 perl-PerlMagick - Update to 6.9.2-8: * Gray artifacts in large gif when using -layers optimize. * The DICOM reader now handles the rescale intercept and slope. * Added 'bmp3:alpha' option for including the alpha channel when writing an image in the BMP3 format. * PixelColor off by one on i386. * Added local contrast enhancement. * Fixed bug in SetPixelCacheExtent that made images all black. * Added 6dot variant for unicode and iso braille formats. * Fixed alpha blending issue with semi-transparent pixels in the merged image of PSD files. This can be disabled by setting the option 'psd:alpha-unblend' to 'off'. * Fixed issue in jpeg:extent that prevented it from working. * Fixed memory leak when reading Photoshop layers in a TIFF file. * Support gradient:bounding-box, gradient:vector, gradient:center, and gradient:radius to shape the gradient rendering. * Recognize label:@- as stdin. * Make commas optional for coordinates. ==== amarok ==== - Cleanup with spec-cleaner - Do not conditionalize ffmpeg, we don't need to be in packman the factory ffmpeg is enough ==== apache-commons-collections ==== Version update (3.2.1 -> 3.2.2) - Version update to 3.2.2: * Various bugfixes * Unix formating in the archive * Fixes bnc#954102 - Refresh patches for the dos2unix conversion: * commons-collections-3.2-build_xml.patch * jakarta-commons-collections-javadoc-nonet.patch - Add patch to add missing MANIFEST.MF file: * commons-collections-missing-MF.patch ==== apache2-mod_dnssd ==== - %{apache_branch} converted to number- test module with %apache_test_module_load ==== atril ==== Version update (1.12.1 -> 1.12.2) Subpackages: atril-backends atril-lang libatrildocument3 libatrilview3 - Update to 1.12.2: * [epub] Fix crash when accessibility is enabled. ==== bash-completion ==== - Add patch respect-variables-boo940837.patch to avoid completions which results in e.g. ls \$HO - Add patch rm-completion-smart-boo958462.patch to allow completions list e.g. rm prefix*.jpg<TAB><TAB> - Modify patch LVM-completion-bsc946875.patch that is add the new patch from Liuhua Wang ==== calligra ==== Subpackages: calligra-extras-dolphin calligra-extras-okular calligra-stage calligra-words-common - Add disk constraints ==== chromaprint ==== - Remove needless conditional for the libdir which is in the macro ==== gegl-unstable ==== Subpackages: gegl-0_3 libgegl-0_3-0 - Add missing post/postun handling for gegl-0_3. ==== graphite2 ==== Version update (1.3.2 -> 1.3.3) Subpackages: graphite2-devel libgraphite2-3 libgraphite2-3-32bit - updated to 1.3.3 * Slight speed up in Collision Avoidance * Remove dead bidi code * Bug fixes . Between pass bidi reorderings and at the end . Decompressor fuzz bugs . Other fuzz bugs ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - grub2-xen-pv-firmware.cfg: fix hd boot (boo#926795) ==== hylafax+ ==== Subpackages: hylafax+-client libfaxutil5_5_6 - Guard the inclusion of rchylafax+.- Only run cron jobs if hylafax is configured (boo#958150) - Clean up the spec file a bit. - Fix build. - Export CFLAGS and CXXFLAGS so that the flags are imported by configure. - Use 'make -j1' to prevent parallel building. - post and postun sections are always need. ==== kcm5-fcitx ==== Subpackages: kf5-kcm-fcitx kf5-kcm-fcitx-icons - Upstream fix for converting to QTreeView instead of broken KCategorizedView; this fixes the still-existing crash at clicking "Only Show Currnet Language" checkbox: 0001-kcm-revert-to-QTreeView-implementation-KCategorizedV.patch obsoleting the old patch kcm-fcitx-workaround-for-invalid-langcode.patch ==== latex2html ==== Version update (2012 -> 2015) - updated to 2015: apply patches from Debian D latex2html-2012-backref-workaround.diff D latex2html-2012-binmode.diff D latex2html-2012-dest-dir.diff D latex2html-2012-gsout.diff (upstreamed) D latex2html-2012-match-multiline.diff (upstreamed) D latex2html-2012-perl-bindir.diff D latex2html-2012-share-dir.diff A latex2html-backref-workaround.diff A latex2html-binmode.diff A latex2html-dest-dir.diff A latex2html-perl-bindir.diff A latex2html-share-dir.diff ==== libaccounts-glib ==== - Add libaccounts-glib-ignore-deprecated-declarations.patch: fix build with latest glib2. ==== libdmapsharing ==== - Summary and RPM group update ==== libgit2-glib ==== Version update (0.23.6 -> 0.23.8) - Update to version 0.23.8: + Misc bugfixing. ==== libpng12 ==== Version update (1.2.55 -> 1.2.56) Subpackages: libpng12-0 libpng12-0-32bit libpng12-devel - updated to 1.2.56: Fixed an out-of-range read in png_check_keyword() (Bug report from Qixue Xiao, CVE-2015-8540). Added keyword checks to pngset.c ==== libreoffice ==== Version update (5.0.3.2 -> 5.0.4.2) Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions - Version update to 5.0.4.2: * Final of the 5.0.4 series- bnc#945047 - LO-L3: LO is duplicating master pages * bnc-945047.diff- Version update to 5.0.4.1: * rc1 of 5.0.4 with various regression fixes ==== libvirt-glib ==== Version update (0.2.2 -> 0.2.3) Subpackages: libvirt-glib-1_0-0 typelib-1_0-LibvirtGLib-1_0 - Update to version 0.2.3: + virt-admin and administration API. + Various improvements in virtio devices support. + Log daemon: logging improvements and protocol. + network: selectively disable -Wcast-align in virNetDevParseDadStatus. + log_manager: Include configmake.h last. + virtlogd: - Fix build without DBus. - Use %llu to print 64bit types. ==== menu-cache ==== Version update (1.0.0 -> 1.0.1) Subpackages: libmenu-cache3 - New upstream release 1.0.1 * Fixed crash on generating menu with both tags <DefaultAppDirs/> and <KDELegacyDirs/> present. * Fixed crash when menu-cache-gen ran manually without CACHE_GEN_VERSION. * Fixed crash in menu-cache-gen on <Filename> in menu layout with <OnlyUnallocated/> tag present. * Fixed incorrect processing of <Merge type=?files?> in menu-cache-gen. * Added safeguards against environment variables containing newlines. * Fixed case when cache was not updated while it should, it was claimed to be fixed in 1.0.0 but apparently fix was incomplete. * Fixed ignored <Filename> tags inside of <Layout>. * Fixed memory corruption in scanning <LegacyDir> addressed directory. * Removed menu-cache-1.0.0-Fix-crash-on-generating-menu.patch * Removed menu-cache-1.0.0-Fix-crash-CACHE_GEN_VERSION.patch ==== openvpn ==== - Adjust /var/run to _rundir macro value in openvpn@.service too. ==== poppler ==== Version update (0.38.0 -> 0.39.0) Subpackages: libpoppler-cpp0 libpoppler-devel libpoppler-glib8 poppler-tools - Update to version 0.39.0: + core: - Ignore the alternateSpace and tintTransform (fdo#92381). - CairoOutputDev: . Scale radial pattern (fdo#22098). . Implement function shading using mesh gradients (fdo#88394). - Regression test improvements. - Fix typos in error messages. + build system: Visual Studio 2015 now supports snprintf (fdo#93116). + utils: - pdftops: fix %%PageBoundingBox (fdo#87161). - pdftocairo: Fix double free when both user and owner passwords are given. + glib: - Add duration_real to PopplerPageTransition (fdo#92040). - Remove enum PopplerOrientation from API (fdo#93229). - Documentation improvements. - glib-demo improvements. - Bump soname following upstream changes. ==== poppler-qt ==== Version update (0.38.0 -> 0.39.0) - Update to version 0.39.0: + core: - Ignore the alternateSpace and tintTransform (fdo#92381). - CairoOutputDev: . Scale radial pattern (fdo#22098). . Implement function shading using mesh gradients (fdo#88394). - Regression test improvements. - Fix typos in error messages. + build system: Visual Studio 2015 now supports snprintf (fdo#93116). + utils: - pdftops: fix %%PageBoundingBox (fdo#87161). - pdftocairo: Fix double free when both user and owner passwords are given. + glib: - Add duration_real to PopplerPageTransition (fdo#92040). - Remove enum PopplerOrientation from API (fdo#93229). - Documentation improvements. - glib-demo improvements. - Bump soname following upstream changes. ==== poppler-qt5 ==== Version update (0.38.0 -> 0.39.0) Subpackages: libpoppler-qt5-1 libpoppler-qt5-devel - Update to version 0.39.0: + core: - Ignore the alternateSpace and tintTransform (fdo#92381). - CairoOutputDev: . Scale radial pattern (fdo#22098). . Implement function shading using mesh gradients (fdo#88394). - Regression test improvements. - Fix typos in error messages. + build system: Visual Studio 2015 now supports snprintf (fdo#93116). + utils: - pdftops: fix %%PageBoundingBox (fdo#87161). - pdftocairo: Fix double free when both user and owner passwords are given. + glib: - Add duration_real to PopplerPageTransition (fdo#92040). - Remove enum PopplerOrientation from API (fdo#93229). - Documentation improvements. - glib-demo improvements. - Bump soname following upstream changes. ==== python-keyring ==== Version update (5.4 -> 5.7) - Update to version 5.7 - Removed CONTRIBUTORS.txt because not available in upstream source anymore. - dropped patches keyring-import-gi.patch and keyring-gnome-3.18.patch because they were obsoleted by fixes in upstream source 5.7 --- * Issue #177: Resolve default keyring name on Gnome using the API. * Issue #145: Add workaround for password exposure through process status for most passwords containing simple characters. 5.6 --- * Allow keyring to be invoked from command-line with ``python -m keyring``. 5.5.1 ----- * Issue #156: Fixed test failures in ``pyfs`` keyring related to 0.5 release. 5.5 --- * Pull Request #176: Use recommended mechanism for checking GnomeKeyring version. ==== systemd-presets-branding-openSUSE ==== - don't enable ModemManager and wpa_supplicant. Both will be started on demand (bnc#717130)- Add display-manager.service to defaults presets (boo#958880). ==== tigervnc ==== Subpackages: xorg-x11-Xvnc - u_tigervnc_update_default_vncxstartup.patch * Update default VNC xstartup script. - Add dependency on xinit and icewm. (bnc#956537) ==== ucode-intel ==== - Fix dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562) ==== viewnior ==== Version update (1.5 -> 1.6) Subpackages: viewnior-lang - Update to 1.6. * Added support for the back & forward buttons of your mouse. * Updated translations. * Fixed mouse scroll behaviour and actions settings. ==== virt-viewer ==== Version update (2.0 -> 3.0) - Update to virt-viewer version 3.0 virt-viewer-3.0.tar.bz2 - Last release to support GTK2 for Linux. The next 4.0 release will be GTK3 only - Don?t add URI scheme / path info to oVirt URIs - Require spice-gtk >= 0.30 - Enable webdav folder sharing with spice - Add preferences UI dialog - Take ?direct into account when checking if guest is reachable - Take SPICE proxy into account when connecting to oVirt instances - Fail gracefully when hostname is not returned by oVirt - Don?t show empty foreign menu on secondary displays - Avoid accidentally trying to connect to port 0 when oVirt doesn?t specify a port number - Correctly update geometry when enabling/disabling display heads - Avoid accidentally creating extra monitors when using configuration file monitor mapping - Exit normally when cancelling connect dialog - Don?t wait for a guest that we know will never show up - Fix crash when using ?reconnect with SPICE - Avoid zooming out if it would decrease window size below minimum required for top menu display - Fix crash when disabling last enabled display - Honour changes in display position from guest - Don?t show error dialog twice for unknown graphics type - Allow to cancel oVirt auth without error - Set sensitivity of display menu based on whether it is usable or not - Set sensitivity of tool bar buttons based on whether they are usable or not - Set guest name reported by VNC - Fix crash when using gtk-vnc 0.3.8 - Fix alt-tab behaviour in choose VM dialog - Don?t allow missing display in monitor mapping config - Add ?with-osid flag to configure to allow specifying the operating system build target. The values should be based on libosinfo OS short IDs. - Ensure windows installer places menu icon for all users not just admin. Requires manual uninstall of previous windows version - Require address in remote viewer connect dialog - Automatically retry VNC connection after auth failure - Drop GTK2 support for Windows builds - Enable keepalives on libvirt conncetion - Allow resize of window to arbitrary size - Fix thread safety handling event callbacks - Avoid deprecation warnings with newer glib - Pulled in multiple fixes for event loop from libvirt-glib - Fix misc bugs reported by coverity - Fix binary ID in MSI installer - Stop polling libvirt after reconnecting to libvirt ==== wine ==== Version update (1.8~rc3 -> 1.8) Subpackages: wine-32bit - Updated to the 1.8 release This release represents 17 months of development effort and around 13,000 individual changes. The main highlights are the implementation of DirectWrite and Direct2D, and the new Pulse Audio driver.- Updated to 1.8-rc4 codefreeze snapshot - bugfixes only - winetricks updated Packages removed: libpoppler57 Packages added: apache2-mod_perl perl-Apache-AuthCookie perl-Apache-SessionX perl-Linux-Pid perl-Scope-Guard perl-Tie-IxHash perl-autobox libpoppler58 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Converting server:php:applications packages to require version agnostic virtual php packages
by Jimmy Berry 21 Dec '15

21 Dec '15

I attempted to install the php7 package and noticed it does not replace/conflict with php5 and so it runs into a file conflict when installing. I added obsoletes to php7 package which behaves as desired. - https://build.opensuse.org/request/show/348020 I am not sure if there is a clean way to auto update all php5* packages with php7* packages where applicable. Next I noticed a number of php applications will be removed when updated to php7 which is due to hard dependency on php5 package. Many of the packages will work fine on php7 (or may in the future) and so I am working on changing them to php-foo virtual packages instead of php5-foo. I wrote a script to try and detect and fix basic *Require statements in .spec files. Will eventually create submit requests similar to: - https://build.opensuse.org/request/show/348017 - https://build.opensuse.org/request/show/348012 All work will be done in: - https://build.opensuse.org/project/show/home:boombatower:branches:server:ph… Just a heads up in case others are working on this or considering it. Once I have an automated run I am happy with my plan is to do a fair bit of manual inspection and hopefully run a script to ensure same platforms fail to build as parent project and then run submit requests. Any suggests are appreciated. -- Jimmy -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 13

[opensuse-factory] Tumbleweed - Review of the week 2015/51
by Dominique Leuenberger / DimStar 21 Dec '15

21 Dec '15

Dear Tumbleweed users and hackers, After a week of fighting some OBS issues, we’re back in business and some snapshots could be produced, tested and delivered to you. The most notable updates were * Mesa 11.0.7 * DBus 1.10 – The basic setup for the well-known system and session buses is * now done in read-only files in ${datadir} (normally /usr/share) * freetype 2.6.2 – a minor update, but it impacts the font rendering; glyphs appear less bold * openssl 1.0.2e – you shall be protected again * btrfs/fstrim timer is being enabled using the presets Things that are currently in staging (and might need attention) * Plasma 5.5.1 – Newly entered, no issues known yet. It will take a moment as, again, the UI changes which means openQA has to learn about the new design * Kernel 4.3.2 – the kernel package layout change (you remember, -xen is being merged into -default) is still in need of fixes in other areas (see boo#959126, should be ready soon) * systemd 228 – when openQA switches to tty1, there is no login prompt, seems like getty(a)tty1.service is not spawning properly (see boo#xxxxxx) * gcc 5.3.1 – so far only minor issues identified, but more might show up The next couple weeks might be quite – or not: it depends on how many of our contributors will find time to hack on openSUSE during the christmas period (for the ones celebrating and caring for it). Have a great weekend ahead! Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] rebooting problem with Plasma on Tumbleweed
by C. Brouerius van Nidek 21 Dec '15

21 Dec '15

with every booting with my fully updated Tumbleweed I have since month a small but earnest problem. At the end of the booting when the programs of my choice are loaded as set with "Configure Desktop"under startup and shutdown I have to be prepared to insert the requested password in the Kwallet window. If I am too late or just forget to insert the password the desktop just freezes and I can only restart with ctl-alt backspace. I assumed that this problem would somehow be solved during the last two month of updates. I have looked into bugzilla but do not recognize anything close to my problem. Somebody with an idea how to solve my problem? -- Linux User 183145 using KDE4 Tumbleweed on a Pentium IV , powered by openSUSE 20151218 (x86_64) Kernel: 4.3.3-1-default KDE Development Platform: 4.14.14 11:56am up 0:59, 2 users, load average: 0.20, 0.31, 0.35 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20151218 released!
by Ludwig Nussel 20 Dec '15

20 Dec '15

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Packages changed: biosdevname breeze5-icons (5.4.3 -> 5.16.0) btrfsprogs dmraid dtc evolution (3.18.2 -> 3.18.3) evolution-data-server (3.18.2 -> 3.18.3) evolution-ews (3.18.2 -> 3.18.3) haveged installation-images-openSUSE (14.210 -> 14.211) kbd kernel-firmware kernel-source (4.3.0 -> 4.3.3) kexec-tools kmod (21 -> 22) ldb (1.1.23 -> 1.1.24) libcacard (2.3.0 -> 2.4.0) libcroco (0.6.9 -> 0.6.10) libgdata (0.17.3 -> 0.17.4) libgpg-error (1.20 -> 1.21) lvm2 mdadm mobile-broadband-provider-info (20150323 -> 20151214) net-snmp p7zip perl-Bootloader (0.900 -> 0.901) pinentry (0.9.6 -> 0.9.7) plymouth qemu (2.3.0 -> 2.4.0) qemu-linux-user (2.3.0 -> 2.4.0) samba (4.3.2 -> 4.3.3) sssd (1.13.1 -> 1.13.2) xen (4.5.1_13 -> 4.6.0_04) xf86-video-nouveau (1.0.11 -> 1.0.12) === Details === ==== biosdevname ==== - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562) ==== breeze5-icons ==== Version update (5.4.3 -> 5.16.0) - Added applets.patch: install applet icons (kde#355676)- Mark license as LGPL-3.0 - Add oxygen.diff, certain applications still expect oxygen icons to be present, e.g. kmail ==== btrfsprogs ==== Subpackages: libbtrfs0 - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at post / postun (boo#958562) ==== dmraid ==== - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562) ==== dtc ==== - Obsolete old devel package as well- Cleanup spec file with spec-cleaner - Dont include soname version in devel package name ==== evolution ==== Version update (3.18.2 -> 3.18.3) Subpackages: evolution-plugin-bogofilter evolution-plugin-spamassassin - Update to version 3.18.3: + [EActivityBar] Do not remove timeout GSource twice in dispose. + [libgnomecanvas] Drag end not recognized with gtk+ 3.18.x. + [EMailBrowser] Free MessageList on close. + Do not leak a GalView in a GalViewInstance. + Read link/visited-link colors also from the style context flags. + Disable animation of the GtkInfoBar's revealer. + Fix possible memory leak with attachments in message preview. + Ask for a forced quit when a user tries to re-close the window. + Attachment's List View passes mouse events to the parent widget. + Add <kudos/> into appdata/metainfo files. + EAttachment/Store not freed in the message preview panel. + Composer: - Last empty block in pasted content could be inaccessible. - Set GObject's data on history event instead on its data and rename them. - Partially revert previous commit as EHTMLEditorHistoryEvent is not GObject. + EHTMLEditorView: - Add an extra debug message when inserting a new history event. - Fix a link detection when ending a link with the Return key. - Don't leak the WebKitDOMRange object when undoing the Return key press. - New lines could be skipped when parsing the mail content into the composer. - Correctly remove the HISTORY_AND events from history. - Post-process every HISTORY_DELETE event. - After undoing the HISTORY_DELETE operation always re-wrap and re-quote current block. - Don't save history when undoing/redoing a paste of content. - Check if the Backspace or Delete operation can remove anything. - Warning printed on console after pressing Enter and Tabulator. - Don't include non-breaking space while recognizing links. - Links could not be recognized after deleting them and later undoing it. - Caret is put on wrong place when pasting into quoted content. - Don't include non-breaking space while recognizing links. - Don't check for links if we cannot obtain valid block. - Undoing and redoing Return press in the beginning of citation is wrong. - 'Paste Quotation' action in HTML mode is not setting the caret to the right position. - Replace the preedit-* signals with compositionstart and compositionend HTML events. - Rename variables and functions to more reflect previous change. - Note a type of DOMRange comparison in comment. + EHTMLEditorSelection: - Remove previously inserted BR if correcting wrapping around selection markers. - Editor is not marked as changed after doing paste action. + EMailPrinter: Clean the unused variables. + Bugs fixed: bgo#757658, bgo#598037, bgo#692713, bgo#744859, bgo#241050, bgo#710761, bgo#758015, bgo#757887, bgo#758191, bgo#758152, bgo#758650, bgo#758665, bgo#752543, bgo#758827, bgo#758827, bgo#758851, bgo#758846, bgo#758849, bgo#758747, bgo#757939, bgo#759046, bgo#759337, bgo#749712. ==== evolution-data-server ==== Version update (3.18.2 -> 3.18.3) Subpackages: evolution-data-server-devel libcamel-1_2-54 libebackend-1_2-10 libebook-1_2-16 libebook-contacts-1_2-2 libecal-1_2-19 libedata-book-1_2-25 libedata-cal-1_2-28 libedataserver-1_2-21 libedataserverui-1_2-1 typelib-1_0-EBook-1_2 typelib-1_0-EBookContacts-1_2 typelib-1_0-EDataServer-1_2 - Update to version 3.18.3: + [Camel] Check for session existence in store/folder maybe_connect. + [IMAPx] Doesn't ask for password when a wrong is entered. + [POP3] Avoid deadlock around pop3_folder_get_message_sync(). + [ECacheReaper] Recover data for private folders. + Correct test-vcard-parsing, use unique test names. + Bugs fixed: bgo#757789, bgo#702127, bgo#746675. ==== evolution-ews ==== Version update (3.18.2 -> 3.18.3) Subpackages: evolution-ews-lang libeews-1_2-0 libewsutils0 - Update to version 3.18.3: + [Camel] Fill message From header if missing in received MIME content. + Add <kudos/> into a metainfo file. + Bugs fixed: bgo#758375. ==== haveged ==== Subpackages: libhavege1 - Fix missing dependency on coreutils for initrd macros (boo#958562) ==== installation-images-openSUSE ==== Version update (14.210 -> 14.211) - adjust module config - add xen kernel/initrd links for compat - 14.211 ==== kbd ==== Subpackages: kbd-legacy - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562) ==== kernel-firmware ==== Subpackages: ucode-amd - Fix dependencies for initrd macros (boo#958562) - Fix missing dependency for ucode-amd, too (boo#958562) - Call missing initrd macro at postun (boo#958562) ==== kernel-source ==== Version update (4.3.0 -> 4.3.3) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - drm/i915: Do a better job at disabling primary plane in the noatomic case (bnc#954137). - commit db72752- ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd (bsc#958439). - ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads (bsc#958439). - ALSA: hda - Apply click noise workaround for Thinkpads generically (bsc#958439). - commit 7b4772e- Linux 4.3.3. - commit 0baa1c7- Linux 4.3.2 (bsc#954414). - Delete patches.fixes/0001-X.509-Fix-the-time-validation-ver-2.patch. - commit 2aebb11- Linux 4.3.1. - commit 0e3e409- ALSA: hda - Fix noise problems on Thinkpad T440s (boo#958504). - commit 6945bb0- Refresh patches.suse/stack-unwind. Use the fix from master. - commit d3f999c- Refresh patches.suse/stack-unwind. Add missing put_cpu() in case dwarf unwinder succeeds (bnc#943107) - commit 60ce178- thinkpad_acpi: Don't yell on unsupported brightness interfaces (boo#957152). - commit 0e6e680- drm/i915: Don't override output type for DDI HDMI (boo#955190). - drm/i915: Don't compare has_drrs strictly in pipe config (bsc#956397). - commit bce32fe- Delete patches.fixes/bridge-module-get-put.patch. As discussed in http://lists.opensuse.org/opensuse-kernel/2015-11/msg00046.html - commit 91e30a7- Enable pvops Xen for x86_64/vanilla as well i386/vanilla is left as is for now, because it matches the non-pae - default kernel which does not support Xen either. - commit 6a48ac7- ethernet/atheros/alx: add Killer E2400 device ID (boo#955363). - commit 66773be- XEN: Use the PVOPS kernel (fate#315712) Merge the -pv configs into -default (-pae on i386) and -debug and drop the -xen flavor and the associated patches.xen series. For a transitional period, the -xen flavor will be maintained in a separate branch as a reference. - commit ff1dcd9- X.509: Fix the time validation [ver #2] (bsc#954414). - commit 6b3b033- Update config files. Enable CRASHER on s390x to be the same as in all other configs. - commit 71162f2- Rename patches.suse/crasher-26.diff to patches.suse/crasher.patch It is no longer anything for 2.6 :). - commit d407cb2- Refresh patches.suse/crasher.patch See the patch to see what the update consists of. - commit 57989db ==== kexec-tools ==== - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562) ==== kmod ==== Version update (21 -> 22) Subpackages: kmod-compat libkmod2 - Update to new upstream release 22 * support `insmod -f` * depmod: do not fall back to uname on bad version ==== ldb ==== Version update (1.1.23 -> 1.1.24) Subpackages: libldb1 libldb1-32bit - Update to 1.1.24. + fix LDAP \00 search expression attack DoS; CVE-2015-3223; (bso#11325) + fix remote read memory exploit in LDB; CVE-2015-5330; (bso#11599) + move ldb_(un)pack_data into ldb_module.h for testing + fix installation of _ldb_text.py + fix propagation of LDB errors through TDB + fix bug triggered by having an empty message in database during search ==== libcacard ==== Version update (2.3.0 -> 2.4.0) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Patches added: 0040-dictzip-Fix-on-big-endian-systems.patch- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Patches added: 0039-tests-Unique-test-path-for-string-v.patch- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Patches added: 0038-tcg-aarch64-Fix-tcg_out_qemu_-ld-st.patch- Update to v2.4.0: See http://wiki.qemu-project.org/ChangeLog/2.4- Update to v2.4.0-rc2: See http://wiki.qemu-project.org/ChangeLog/2.4- Update to v2.4.0-rc1: See http://wiki.qemu-project.org/ChangeLog/2.4 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Patches dropped: 0037-linux-user-Allocate-thunk-size-dyna.patch 0039-s390x-Fix-stoc-direction.patch 0040-s390x-Add-interlocked-access-facili.patch 0041-fdc-force-the-fifo-access-to-be-in-.patch 0042-rules.mak-Force-CFLAGS-for-all-obje.patch 0043-qcow2-Set-MIN_L2_CACHE_SIZE-to-2.patch 0044-hw-arm-boot-Increase-fdt-alignment.patch * Patches renamed: 0038-Revert-Revert-seccomp-tests-that-al.patch -> 0037-Revert-Revert-seccomp-tests-that-al.patch ==== libcroco ==== Version update (0.6.9 -> 0.6.10) - Update to version 0.6.10: + Misc bug fixes. ==== libgdata ==== Version update (0.17.3 -> 0.17.4) Subpackages: libgdata-devel libgdata22 typelib-1_0-GData-0_0 - Update to version 0.17.4: + Major changes: - Download stream data corruption fixes and fixes to content length calculation. - Fix symbol exporting on OS X. - Fix copying and deleting documents in Google Drive. - Fix folder creation in Google Drive. - Fix metadata-only uploads in Google Drive. - Fix searching by title in Google Drive. + API changes: Remove a couple of incorrect GIR annotations. + Bugs fixed: bgo#755976, bgo#754821, bgo#758119, bgo#684920, bgo#758524. + Updated translations. ==== libgpg-error ==== Version update (1.20 -> 1.21) Subpackages: libgpg-error-devel libgpg-error0 libgpg-error0-32bit - update to 1.21: * New functions gpgrt_poll and gpgrt_set_nonblock. For now only pipes and sockets on Unix are supported. * Interface changes relative to the 1.20 release: gpgrt_set_nonblock NEW. gpgrt_get_nonblock NEW. gpgrt_poll NEW. gpgrt_poll_t NEW type. es_poll_t NEW type. es_set_nonblock NEW macro. es_get_nonblock NEW macro. es_poll NEW macro. GPG_ERR_TRUE NEW. GPG_ERR_FALSE NEW. GPG_ERR_NO_NAME NEW. GPG_ERR_NO_KEY NEW. GPG_ERR_SERVER_FAILED NEW. ==== lvm2 ==== Subpackages: device-mapper device-mapper-32bit - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562)- Re-add lvm2-do-not-strip-pdata_tools.patch: this is still needed. ==== mdadm ==== - Add missing pre-requres for initrd macros (boo#958562) ==== mobile-broadband-provider-info ==== Version update (20150323 -> 20151214) - Update to version 20151214: + cl: add APNs for Virgin Mobile, VTR Movil and Nextel (bgo#677596). + sv: fix wrong MNC for El Salvador Claro 706:01 + no: new default APN for Telenor Norway + gb: - move "Asda Mobile" after "Vodafone" - move "giffgaff" after "O2" + ca: add Canadian provider SaskTel Mobility's GSM network + ad: add Andorra Telecom provider + mm: add Ooredoo and Telenor for Myanmar (bgo#694073). + at: add Austria "HoT" provider (MVNO on T-Mobile) (bgo#757626). ==== net-snmp ==== - Request pkgconfig(libssl) instead of openssl-devel to support using LibreSSL as well.- update to upstream version 5.7.3 - remove patch that is now present in the upstream release: * net-snmp-5.7.2-fix-snmptrapd-remote-denial-of-service.patch - rename patches to new version number 5.7.3: delete: * net-snmp-5.7.2-fix-snmpd-crashing-when-an-agentx-disconnects.patch * net-snmp-5.7.2-net-snmp-config-headercheck.patch * net-snmp-5.7.2-perl-tk-warning.patch * net-snmp-5.7.2-pie.patch * net-snmp-5.7.2-socket-path.patch * net-snmp-5.7.2-testing-empty-arptable.patch * net-snmp-5.7.2-velocity-mib.patch add: * net-snmp-5.7.3-fix-snmpd-crashing-when-an-agentx-disconnects.patch * net-snmp-5.7.3-net-snmp-config-headercheck.patch * net-snmp-5.7.3-perl-tk-warning.patch * net-snmp-5.7.3-pie.patch * net-snmp-5.7.3-socket-path.patch * net-snmp-5.7.3-testing-empty-arptable.patch * net-snmp-5.7.3-velocity-mib.patch - add build requirement 'procps' to fix a net-snmp-config error (bsc#935863) - enable DTLS and TLS support (FATE#318789) new binary 'snmptls' was added - add support for hostname netgroups (FATE#316305) '@hostgroup' can be specified for multiple hosts * net-snmp-5.7.3-netgroups.patch - suppress network statistics output in snmpstatus (FATE#316289) '-Sn' don't print any info about the network '-Si' don't print the operational status of network interfaces * net-snmp-5.7.3-snmpstatus-suppress-output.patch- also stop snmptrapd on removal- update to upstream version 5.7.3.pre5 - remove patches that are now present in the upstream release: * net-snmp-5.7.2-build-fix-for-strlcat.patch * net-snmp-5.7.2-fix-mib-representation-of-timeout-values.patch * net-snmp-5.7.2-fix-perl-trap-handler.patch - net-snmp-5.7.2-fix-snmptrapd-remote-denial-of-service.patch: refresh and add patch header- added net-snmp-5.7.2-fix-snmptrapd-remote-denial-of-service.patch: fix remote denial of service problem inside snmptrapd when started with the "-OQ" option (CVE-2014-3565)(bnc#894361) - added net-snmp-5.7.2-fix-perl-trap-handler.patch: fix potential remote denial of service problem inside the snmptrapd Perl trap handler (CVE-2014-2285)(bnc#866942)- merge some old fixes from SLE 11: * init script should provide snmpd. (bnc#466805) * stop all snmp agents when stopping the daemon. (bnc#473328)- recompress .tar.gz - it has trailing garbage, hope we can readd source url on next update- update to upstream version 5.7.2.1, fixing one security issue: * A denial of service attack vector was discovered on the Linux implementation of the ICMP-MIB. (CVE-2014-2284, bnc#866942)- net-snmp-5.7.2-fix-mib-representation-of-timeout-values.patch: fix mib representation of timeout values (bnc#833153)- use _rundir macro- remove old workaround for ppc/ppc64 migrations which is no longer needed (bnc#437293)- add support for python bindings- improve snmptrapd init script (avoid to overwrite the logfile on restart)- Disable parallelism during build. The dependencies between the Perl module and libnetsnmp are not defined correctly and might result in broken linkage (bnc#819497, bnc#818907)- Add Source URL, see https://en.opensuse.org/SourceUrls- net-snmp-5.7.2-build-fix-for-strlcat.patch: fix exported strlcat() prototype that could conflict with other packages (bnc#793548)- update to version 5.7.2: several bug fixes in the agent, client utilities and libraries. The CHANGES file shipped with the package contains a comprehensive list of fixes and improvements - rebase patches to apply cleanly: * net-snmp-5.7.2-perl-tk-warning.patch * net-snmp-5.7.2-socket-path.patch * net-snmp-5.7.2-testing-empty-arptable.patch * net-snmp-5.7.2-pie.patch * net-snmp-5.7.2-velocity-mib.patch * net-snmp-5.7.2-fix-snmpd-crashing-when-an-agentx-disconnects.patch - remove patches that are now present in the upstream release: * net-snmp-5.7.0-recognize-reiserfs.patch * net-snmp-5.7.1-snmplib-zero-timeout.patch * net-snmp-5.7.1-old-api-double-free.patch * net-snmp-5.7.1-use-pclose-to-close-pipes.patch * net-snmp-5.7.1-fix-handling-of-large-filesystems.patch * net-snmp-5.7.1-snmplib-default-retries.patch * net-snmp-5.7.1-fsys-memory-leak.patch * net-snmp-5.7.1-adjust-copyright-in-agent-txt-file.patch * net-snmp-5.7.1-recognize-ocfs2.patch * net-snmp-5.7.1-properly-clean-up-old-requests-in-subagents.patch * net-snmp-5.7.1-reduce-code-duplication-in-agentx.patch * net-snmp-5.7.1-log-agentx-disconnections.patch * net-snmp-5.7.1-more-robust-handling-of-agentx-errors.patch * net-snmp-5.7.1-report-problems-with-setundo-processing.patch * net-snmp-5.7.1-fix-array-index-error.patch- Remove redundant sections from specfile - Avoid shipping .la files- fix array index error that could lead to a crash (CVE-2012-2141) (bnc#759352)- fix agent crash when reloading a subagent (AgentX) during a query (bnc#670789)- add OCFS2 to the list of known file systems- update copyright notice of AGENT.txt allowing us to redistribute the file in our package (from Dave Shield) (bnc#750704)- fix license to be in spdx.org format- logrotate: use "reload" instead of "try-restart" to avoid an unnecessary stop/start cycle in the agent (bnc#707636)- net-snmp-5.7.1-fsys-memory-leak.patch: fix a memory leak in agent/mibgroup/hardware/fsys (bnc#725766) - net-snmp-5.7.1-snmplib-default-retries.patch: change default number of retries back from 0 to 5 (bnc#725766) - net-snmp-5.7.1-fix-handling-of-large-filesystems.patch: fix bug in handling large (>8TB) filesystems (bnc#725766) - net-snmp-5.7.1-use-pclose-to-close-pipes.patch: use pclose() instead of fclose() to close a pipe (bnc#725766) - net-snmp-5.7.1-old-api-double-free.patch: agent: avoid double free when netsnmp_register_old_api() fails (bnc#725766) - net-snmp-5.7.1-snmplib-zero-timeout.patch: snmplib: avoid waiting indefinitely if a session has timeout zero (bnc#725766)- update to version 5.7.1: minor release including some bug fixes- enable net-snmp-devel on all baselib architectures- make sure all delegated requests are removed before closing an AgentX session (bnc#670789)- update to version 5.7.1.rc1 but keep package version as 5.7.1 to avoid update problems when the final version is released- small fixes to snmpd and snmptrapd init scripts: - if $SNMPD_LOGLEVEL is not defined, use LOG_NOTICE instead of LOG_DEBUG - improve messages printed and service description - write snmptrapd logs to /var/log/net-snmpd.log- update README.SUSE to reflect some recent changes and drop a bit of outdated information - update baselibs to reflect new library version - spec file cleanup: rename some source files for consistency- add ReiserFS to the list of known file systems (bnc#715199)- install snmptrapd init script by default (bnc#712175)- fix logging option in snmptrapd init script (bnc#712174)- update upstream patches from branch V5-7-patches to 20110714- update to version 5.7: new features and lots of bug fixes - remove patches that are no longer needed: net-snmp-5.6.0-enable-hrh-filesys.patch net-snmp-5.6.1-recognize-jfs-and-xfs.patch net-snmp-5.6.1-rpm490.patch - refresh and rename patches to apply cleanly after update: net-snmp-5.7.0-pie.patch net-snmp-5.7.0-velocity-mib.patch- switch from rpmdb to rpmts to support rpm-4.9.0- update upstream patches from branch V5-6-patches to 20110512- add JFS and XFS to the list of known file systems (bnc#687327)- update upstream patches from branch V5-6-patches to 20110328- fix libsnmp version in baselibs.conf- update to version 5.6.1: new features and lots of bug fixes - update upstream patches from branch V5-6-patches to 20110104 - remove patches that are no longer needed: net-snmp-5.6.0-ethtool-speed.patch- remove /var/adm/perl-modules/net-snmp from the Perl module- update upstream patches from branch V5-6-patches to 20101129 - spec file cleanup: upstream uses -fno-strict-aliasing by default now - remove patches that are no longer needed: net-snmp-5.5.0-rpmdb-h-detect.patch net-snmp-5.6.0-vendorperl.patch- if-mib: add support for more speeds with ethtool (bnc#650558)- update upstream patches from branch V5-6-patches to 20101101, fixing a segmentation fault on shutdown (bnc#650282)- enable new implementation of hrStorage and hrFilesys to fix persistent indexes in FS and Storage tables (bnc#648364)- update upstream patches from branch V5-6-patches to 20101021- update to version 5.6: new features and lots of bug fixes - refresh and rename patches to apply cleanly after update: net-snmp-5.6.0-pie.patch net-snmp-5.6.0-vendorperl.patch net-snmp-5.6.0-net-snmp-config-headercheck.patch- update upstream patches from branch V5-5-patches to 20100803- change default log level from DEBUG to NOTICE (bnc#623497)- spec file cleanup: remove old backward compatibility scripts- update upstream patches from branch V5-5-patches to 20100602: fixed potential buffer overflow in parsing OIDs in config files- update upstream patches from branch V5-5-patches to 20100531 - add net-snmp-5.5.0-rpmdb-h-detect.patch: workaround for autoconf failing to detect rpm/rpmdb.h - remove patches that are no longer needed: net-snmp-5.5.0-use-lmsensors-v3.patch- create /var/run/agentx during startup to support systems that mount /var/run as tmpfs- update libsnmp package name to reflect the library version we are currently shipping - remove patches that are obsolete: net-snmp-5.4.rc2-versinfo.diff net-snmp-5.4.2_snmpconf-selinux.patch - refresh all patches to apply as "-p1" - spec file cleanup: remove conditionals to build on unsupported versions of the distribution- update upstream patches from branch V5-5-patches to 20100428- add net-snmp-5.5.0_upstream-20100405.patch: merge all patches committed to upstream branch V5-5-patches - remove patches that are now upstream: net-snmp-5.4.2_audit.patch net-snmp-5.5.0_autoconf.patch net-snmp-5.4.2_overflow.patch net-snmp-5.4.2.1-rpm4.7.patch net-snmp-5.5.0_gcc45.patch- Fix strncat properly (from Andreas Jaeger)- Fix code errors found by gcc 4.5- build for libsensors4 instead of libsensors3- remove sparcv9-specific baselib exceptions (not needed)- remove net-snmp-5.4.1.2-rmon-mib-revised_3.patch from sources (upstream since 5.5) - refresh net-snmp-5.5.0_autoconf.patch - spec file cleanup: update package description- update to version 5.5: new features and lots of bug fixes, including: - fix hrSWRunPath for processes other than init (bnc#486270) - remove patches that are now upstream: Add-Default-Router-Table-support.patch Add-ICMP-Statistics-Tables-support.patch Add-IPv6-Scope-Zone-Index.patch Add-IPv6-support-on-Internet-Address-Translation-Tab.patch Fix-for-IPv6-Interface-Table.patch Fix-for-Internet-Address-Prefix-Table.patch Fix-for-Internet-Address-Table.patch Fix-for-tcpConnnectionTable-tcpListenerTable-udpEn.patch Improve-IP-Statistics-tables.patch net-snmp-5.3.0.1_trap-agent-addr_v2.patch net-snmp-5.4.1.2-etherlike-mib-revised_4.patch net-snmp-5.4.x_embedded_perl_error_message.patch- add baselibs.conf as a source - add baselib defs for SPARC- Fix build with rpm 4.7 (net-snmp-5.4.2.1-rpm4.7.patch)- make patch0 usage consistent ==== p7zip ==== - Enable PIE & LD_BIND_NOW security features - Package all the text documentation ==== perl-Bootloader ==== Version update (0.900 -> 0.901) Subpackages: perl-Bootloader-YAML - Add initial implementation of uboot/config script - 0.901 ==== pinentry ==== Version update (0.9.6 -> 0.9.7) Subpackages: pinentry-gtk2 pinentry-qt4 - pinentry 0.9.7: * Fix regressions in the Qt pinentry. (previsouly patched, removed pinentry-qt4-fix-qstring-conversion.patch) * Fix minor problems pinnetyr-tty. * New option --invisible-char. ==== plymouth ==== Subpackages: libply-boot-client2 libply-splash-core2 libply-splash-graphics2 libply2 plymouth-dracut plymouth-plugin-label plymouth-plugin-script plymouth-scripts - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562) ==== qemu ==== Version update (2.3.0 -> 2.4.0) Subpackages: qemu-arm qemu-block-curl qemu-extra qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-ppc qemu-s390 qemu-seabios qemu-sgabios qemu-tools qemu-vgabios qemu-x86 - Fix testsuite on 32bit systems (bsc#957379)- Fix SLE11 build by fixing systemd conditionalization (from olh)- Add systemd unit file and udev rules for qemu guest agent - taken from the SLE12 / Leap package, see boo#955707- Add _constraints file (based on work by kenljohnson)- Enable SLOF build for ppc64le, too, now (bsc#949000, bsc#949016)- Allow building SLOF on ppc64le (bsc#949016) SLOF_ppc64le.patch - Add two checks for DictZip and tar qemu-img behavior (bsc#945778) * Clean up qemu-testsuite build/installation- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Fix endianness issues in DictZip block driver (bsc#937572, bsc#945778) 0027-block-Add-support-for-DictZip-enabl.patch 0028-block-Add-tar-container-format.patch 0040-dictzip-Fix-on-big-endian-systems.patch- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Fix qemu-testsuite for glib2-2.46.0 by assuring uniqueness of paths 0039-tests-Unique-test-path-for-string-v.patch- Build SLOF on ppc64 (bsc#949016, thanks to k0da) * Simplify x86 fw logic while at it - No need to enable KVM for armv6hl - Add notice about pre_checkin.sh to update_git.sh- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Fix aarch64 TCG: 0038-tcg-aarch64-Fix-tcg_out_qemu_-ld-st.patch- Update to v2.4.0: See http://wiki.qemu-project.org/ChangeLog/2.4- Update to v2.4.0-rc2: See http://wiki.qemu-project.org/ChangeLog/2.4 * Provide qemu-img symlink instead of passing QTEST_QEMU_IMG- Update to v2.4.0-rc1: See http://wiki.qemu-project.org/ChangeLog/2.4 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Patches dropped: 0037-linux-user-Allocate-thunk-size-dyna.patch 0039-s390x-Fix-stoc-direction.patch 0040-s390x-Add-interlocked-access-facili.patch 0041-fdc-force-the-fifo-access-to-be-in-.patch 0042-rules.mak-Force-CFLAGS-for-all-obje.patch 0043-qcow2-Set-MIN_L2_CACHE_SIZE-to-2.patch 0044-hw-arm-boot-Increase-fdt-alignment.patch * Patches renamed: 0038-Revert-Revert-seccomp-tests-that-al.patch -> 0037-Revert-Revert-seccomp-tests-that-al.patch * Package new vgabios-virtio.bin * target-x86_64.conf was dropped * Add qemu-block-dmg module sub-package * Set QTEST_QEMU_IMG variable for ahci-test * --enable-quorum and --enable-vnc-ws are no longer available ==== qemu-linux-user ==== Version update (2.3.0 -> 2.4.0) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Patches added: 0040-dictzip-Fix-on-big-endian-systems.patch- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Patches added: 0039-tests-Unique-test-path-for-string-v.patch- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Fix aarch64 TCG: 0038-tcg-aarch64-Fix-tcg_out_qemu_-ld-st.patch- Update to v2.4.0: See http://wiki.qemu-project.org/ChangeLog/2.4- Update to v2.4.0-rc2: See http://wiki.qemu-project.org/ChangeLog/2.4- Update to v2.4.0-rc1: See http://wiki.qemu-project.org/ChangeLog/2.4 * Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.4 * Patches dropped: 0037-linux-user-Allocate-thunk-size-dyna.patch 0039-s390x-Fix-stoc-direction.patch 0040-s390x-Add-interlocked-access-facili.patch 0041-fdc-force-the-fifo-access-to-be-in-.patch 0042-rules.mak-Force-CFLAGS-for-all-obje.patch 0043-qcow2-Set-MIN_L2_CACHE_SIZE-to-2.patch 0044-hw-arm-boot-Increase-fdt-alignment.patch * Patches renamed: 0038-Revert-Revert-seccomp-tests-that-al.patch -> 0037-Revert-Revert-seccomp-tests-that-al.patch ==== samba ==== Version update (4.3.2 -> 4.3.3) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libgensec0 libgensec0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr0 libndr0-32bit libnetapi0 libnetapi0-32bit libregistry0 libsamba-credentials0 libsamba-credentials0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient-devel libsmbclient-raw0 libsmbclient-raw0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap0 libsmbldap0-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-32bit samba-client samba-client-32bit samba-doc samba-libs samba-libs-32bit samba-winbind samba-winbind-32bit - Update to 4.3.3. + Malicious request can cause Samba LDAP server to hang, spinning using CPU; CVE-2015-3223; (bso#11325); (bnc#958581). + Remote read memory exploit in LDB; CVE-2015-5330; (bso#11599); (bnc#958586). + Insufficient symlink verification (file access outside the share); CVE-2015-5252; (bso#11395); (bnc#958582). + No man in the middle protection when forcing smb encryption on the client side; CVE-2015-5296; (bso#11536); (bnc#958584). + Currently the snapshot browsing is not secure thru windows previous version (shadow_copy2); CVE-2015-5299; (bso#11529); (bnc#958583). + Fix Microsoft MS15-096 to prevent machine accounts from being changed into user accounts; CVE-2015-8467; (bso#11552); (bnc#958585). ==== sssd ==== Version update (1.13.1 -> 1.13.2) Subpackages: libnfsidmap-sss libsss_idmap0 libsss_nss_idmap0 sssd-32bit sssd-krb5-common sssd-ldap - Update to new upstream release 1.13.2 * Initial support for Smart Card authentication was added. * The PAM prompting was enhanced so that when Two-Factor Authentication is used, both factors (password and token) can be entered separately on separate prompts. * This release supports authenticating againt a KDC proxy. ==== xen ==== Version update (4.5.1_13 -> 4.6.0_04) Subpackages: xen-doc-html xen-libs xen-tools xen-tools-domU - fate#315712: XEN: Use the PVOPS kernel Turn off building the KMPs now that we are using the pvops kernel xen.spec- Upstream patches from Jan 561bbc8b-VT-d-don-t-suppress-invalidation-address-write-when-it-is-zero.patch 561d20a0-x86-hide-MWAITX-from-PV-domains.patch 561e3283-x86-NUMA-fix-SRAT-table-processor-entry-parsing-and-consumption.patch 5632118e-arm-Support-hypercall_create_continuation-for-multicall.patch 56321222-arm-rate-limit-logging-from-unimplemented-PHYSDEVOP-and-HVMOP.patch 56321249-arm-handle-races-between-relinquish_memory-and-free_domheap_pages.patch 5632127b-x86-guard-against-undue-super-page-PTE-creation.patch 5632129c-free-domain-s-vcpu-array.patch (Replaces CVE-2015-7969-xsa149.patch) 563212c9-x86-PoD-Eager-sweep-for-zeroed-pages.patch 563212e4-xenoprof-free-domain-s-vcpu-array.patch 563212ff-x86-rate-limit-logging-in-do_xen-oprof-pmu-_op.patch 56323737-libxl-adjust-PoD-target-by-memory-fudge-too.patch 56377442-x86-PoD-Make-p2m_pod_empty_cache-restartable.patch 5641ceec-x86-HVM-always-intercept-AC-and-DB.patch (Replaces CVE-2015-5307-xsa156.patch) 5644b756-x86-HVM-don-t-inject-DB-with-error-code.patch - Dropped 55b0a2db-x86-MSI-track-guest-masking.patch- Use upstream variants of block-iscsi and block-nbd- Remove xenalyze.hg, its part of xen-4.6- Update to Xen Version 4.6.0 xen-4.6.0-testing-src.tar.bz2 mini-os.tar.bz2 blktap2-no-uninit.patch stubdom-have-iovec.patch - Renamed xsa149.patch to CVE-2015-7969-xsa149.patch - Dropped patches now contained in tarball or unnecessary xen-4.5.2-testing-src.tar.bz2 54c2553c-grant-table-use-uint16_t-consistently-for-offset-and-length.patch 54ca33bc-grant-table-refactor-grant-copy-to-reduce-duplicate-code.patch 54ca340e-grant-table-defer-releasing-pages-acquired-in-a-grant-copy.patch 54f4985f-libxl-fix-libvirtd-double-free.patch 55103616-vm-assist-prepare-for-discontiguous-used-bit-numbers.patch 551ac326-xentop-add-support-for-qdisk.patch 552d0fd2-x86-hvm-don-t-include-asm-spinlock-h.patch 552d0fe8-x86-mtrr-include-asm-atomic.h.patch 552d293b-x86-vMSI-X-honor-all-mask-requests.patch 552d2966-x86-vMSI-X-add-valid-bits-for-read-acceleration.patch 5537a4d8-libxl-use-DEBUG-log-level-instead-of-INFO.patch 5548e903-domctl-don-t-truncate-XEN_DOMCTL_max_mem-requests.patch 5548e95d-x86-allow-to-suppress-M2P-user-mode-exposure.patch 554c7aee-x86-provide-arch_fetch_and_add.patch 554c7b00-arm-provide-arch_fetch_and_add.patch 554cc211-libxl-add-qxl.patch 55534b0a-x86-provide-add_sized.patch 55534b25-arm-provide-add_sized.patch 5555a4f8-use-ticket-locks-for-spin-locks.patch 5555a5b9-x86-arm-remove-asm-spinlock-h.patch 5555a8ec-introduce-non-contiguous-allocation.patch 556d973f-unmodified-drivers-tolerate-IRQF_DISABLED-being-undefined.patch 5576f143-x86-adjust-PV-I-O-emulation-functions-types.patch 55795a52-x86-vMSI-X-support-qword-MMIO-access.patch 557eb55f-gnttab-per-active-entry-locking.patch 557eb5b6-gnttab-introduce-maptrack-lock.patch 557eb620-gnttab-make-the-grant-table-lock-a-read-write-lock.patch 557ffab8-evtchn-factor-out-freeing-an-event-channel.patch 5582bf43-evtchn-simplify-port_is_valid.patch 5582bf81-evtchn-remove-the-locking-when-unmasking-an-event-channel.patch 5583d9c5-x86-MSI-X-cleanup.patch 5583da09-x86-MSI-track-host-and-guest-masking-separately.patch 5583da64-gnttab-use-per-VCPU-maptrack-free-lists.patch 5583da8c-gnttab-steal-maptrack-entries-from-other-VCPUs.patch 5587d711-evtchn-clear-xen_consumer-when-clearing-state.patch 5587d779-evtchn-defer-freeing-struct-evtchn-s-until-evtchn_destroy_final.patch 5587d7b7-evtchn-use-a-per-event-channel-lock-for-sending-events.patch 5587d7e2-evtchn-pad-struct-evtchn-to-64-bytes.patch 55b0a218-x86-PCI-CFG-write-intercept.patch 55b0a255-x86-MSI-X-maskall.patch 55b0a283-x86-MSI-X-teardown.patch 55b0a2ab-x86-MSI-X-enable.patch blktapctrl-close-fifos.patch blktapctrl-default-to-ioemu.patch blktapctrl-disable-debug-printf.patch blktap-no-uninit.patch blktap-pv-cdrom.patch build-tapdisk-ioemu.patch ioemu-bdrv-open-CACHE_WB.patch ioemu-blktap-barriers.patch ioemu-blktap-fv-init.patch ioemu-blktap-image-format.patch ioemu-blktap-zero-size.patch libxl.set-migration-constraints-from-cmdline.patch local_attach_support_for_phy.patch pci-attach-fix.patch qemu-xen-upstream-megasas-buildtime.patch tapdisk-ioemu-logfile.patch tapdisk-ioemu-shutdown-fix.patch udev-rules.patch xen.build-compare.ipxe.patch xen.build-compare.mini-os.patch xen.build-compare.smbiosdate.patch xen.build-compare.vgabios.patch xen.build-compare.xen_compile_h.patch xl-coredump-file-location.patch- bsc#954405 - VUL-0: CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception - bsc#954018 - VUL-0: CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156) CVE-2015-5307-xsa156.patch- Update to Xen 4.5.2 xen-4.5.2-testing-src.tar.bz2 - Drop the following xen-4.5.1-testing-src.tar.bz2 552d0f49-x86-traps-identify-the-vcpu-in-context-when-dumping-regs.patch 5576f178-kexec-add-more-pages-to-v1-environment.patch 55780be1-x86-EFI-adjust-EFI_MEMORY_WP-handling-for-spec-version-2.5.patch 558bfaa0-x86-traps-avoid-using-current-too-early.patch 5592a116-nested-EPT-fix-the-handling-of-nested-EPT.patch 559b9dd6-x86-p2m-ept-don-t-unmap-in-use-EPT-pagetable.patch 559bc633-x86-cpupool-clear-proper-cpu_valid-bit-on-CPU-teardown.patch 559bc64e-credit1-properly-deal-with-CPUs-not-in-any-pool.patch 559bc87f-x86-hvmloader-avoid-data-corruption-with-xenstore-rw.patch 559bdde5-pull-in-latest-linux-earlycpio.patch 55a62eb0-xl-correct-handling-of-extra_config-in-main_cpupoolcreate.patch 55a66a1e-make-rangeset_report_ranges-report-all-ranges.patch 55a77e4f-dmar-device-scope-mem-leak-fix.patch 55c1d83d-x86-gdt-Drop-write-only-xalloc-d-array.patch 55c3232b-x86-mm-Make-hap-shadow-teardown-preemptible.patch 55dc78e9-x86-amd_ucode-skip-updates-for-final-levels.patch 55df2f76-IOMMU-skip-domains-without-page-tables-when-dumping.patch 55e43fd8-x86-NUMA-fix-setup_node.patch 55e43ff8-x86-NUMA-don-t-account-hotplug-regions.patch 55e593f1-x86-NUMA-make-init_node_heap-respect-Xen-heap-limit.patch 55f2e438-x86-hvm-fix-saved-pmtimer-and-hpet-values.patch 55f9345b-x86-MSI-fail-if-no-hardware-support.patch 5604f2e6-vt-d-fix-IM-bit-mask-and-unmask-of-FECTL_REG.patch 560a4af9-x86-EPT-tighten-conditions-of-IOMMU-mapping-updates.patch 560a7c36-x86-p2m-pt-delay-freeing-of-intermediate-page-tables.patch 560a7c53-x86-p2m-pt-ignore-pt-share-flag-for-shadow-mode-guests.patch 560bd926-credit1-fix-tickling-when-it-happens-from-a-remote-pCPU.patch 560e6d34-x86-p2m-pt-tighten-conditions-of-IOMMU-mapping-updates.patch 561bbc8b-VT-d-don-t-suppress-invalidation-address-write-when-0.patch 561d20a0-x86-hide-MWAITX-from-PV-domains.patch 561e3283-x86-NUMA-fix-SRAT-table-processor-entry-handling.patch 563212c9-x86-PoD-Eager-sweep-for-zeroed-pages.patch CVE-2015-4106-xsa131-9.patch CVE-2015-3259-xsa137.patch CVE-2015-7311-xsa142.patch CVE-2015-7835-xsa148.patch xsa139-qemuu.patch xsa140-qemuu-1.patch xsa140-qemuu-2.patch xsa140-qemuu-3.patch xsa140-qemuu-4.patch xsa140-qemuu-5.patch xsa140-qemuu-6.patch xsa140-qemuu-7.patch xsa140-qemut-1.patch xsa140-qemut-2.patch xsa140-qemut-3.patch xsa140-qemut-4.patch xsa140-qemut-5.patch xsa140-qemut-6.patch xsa140-qemut-7.patch xsa151.patch xsa152.patch xsa153-libxl.patch CVE-2015-5154-qemuu-check-array-bounds-before-writing-to-io_buffer.patch CVE-2015-5154-qemuu-fix-START-STOP-UNIT-command-completion.patch CVE-2015-5154-qemuu-clear-DRQ-after-handling-all-expected-accesses.patch CVE-2015-5154-qemut-check-array-bounds-before-writing-to-io_buffer.patch CVE-2015-5154-qemut-fix-START-STOP-UNIT-command-completion.patch CVE-2015-5154-qemut-clear-DRQ-after-handling-all-expected-accesses.patch CVE-2015-6815-qemuu-e1000-fix-infinite-loop.patch CVE-2015-6815-qemut-e1000-fix-infinite-loop.patch CVE-2015-5239-qemuu-limit-client_cut_text-msg-payload-size.patch CVE-2015-5239-qemut-limit-client_cut_text-msg-payload-size.patch"- bsc#950704 - CVE-2015-7970 VUL-1: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150) 563212c9-x86-PoD-Eager-sweep-for-zeroed-pages.patch ==== xf86-video-nouveau ==== Version update (1.0.11 -> 1.0.12) - Update to version 1.0.12 * New nouveau DDX release Packages removed: kernel-pv-devel > kernel-xen-devel xen-kmp-default Packages added: qemu-block-dmg -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0