September 2014 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Pulseaudio raop
by Alejandro Bonilla 12 Sep '14

12 Sep '14

Hi, I'm trying to get AirPlay working with Pulse, I do see paprefs provides "Make discoverable Apple AirTunes sound devices available locally" and my AirPlay devices shows up at some point under available devices, but none of them "stick" and no audio is played back. Any success stories? Do we have the raop/2 module embedded in pulseaudio? TIA -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Dokumenty
by Andrzej Sieradzan 12 Sep '14

12 Sep '14

Witam, Zwracam się z zapytaniem w imieniu internetowego serwisu tłumaczeniowego. Polscy przedsiębiorcy szukają dobrych jakościowo tłumaczeń w związku z rosnącym eksportem i chęcią nawiązywania międzynarodowej współpracy. Chciałem się zapytać czy mogę przedstawić ofertę na usługi tłumaczeń pisemnych? Pozdrawiam, Andrzej Sieradzan Senior Account Manager translateit.pl -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] obs factory-auto "debian.tar.gz is not mentioned in spec files as source or patch"
by Kai-Uwe Behrmann 12 Sep '14

12 Sep '14

Hello, my project builds packages for factory and for various distros in one go. So rpm's and debian packages are build from one project. Here the project in question: https://build.opensuse.org/package/show/multimedia:color_management/oyranos and the declined request: https://build.opensuse.org/request/show/245162 What can I do to avoid the nasty message above? Is there a easy workaround? thanks in advance and kind regards Kai-Uwe -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 13.2 release schedule
by Stephan Kulow 12 Sep '14

12 Sep '14

Hi, I updated http://stephan.kulow.org/opensuse_13.2/ to reflect the release schedule as I plan with: 20140918 13.2 Beta 20141009 13.2 RC1 20141030 13.2 GM 20141104 13.2 release Till the Beta I will take care of syncing Factory and 13.2, after that 13.2 is an indepedent project with its own staging projects. How we track the submissions to it, I haven't yet decided. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 11

[opensuse-factory] New Factory snapshot 20140904 released!
by Ludwig Nussel 12 Sep '14

12 Sep '14

Changed packages: ==== FastCGI ==== - Update license tag to spdx 1.2. ==== IPython ==== - Add pandoc dependency for nbconvert notebook converter. This is only available for openSUSE > 13.1. - Change some dependencies that are not required for basic functionality to Recommends. ==== MozillaFirefox ==== Version update (31.0 -> 31.1.0) Subpackages: MozillaFirefox-translations-common - update to Firefox 31.1.0esr (bnc#894370) * MFSA 2014-67/CVE-2014-1553/CVE-2014-1562 Miscellaneous memory safety hazards * MFSA 2014-68/CVE-2014-1563 (bmo#1018524) Use-after-free during DOM interactions with SVG * MFSA 2014-69/CVE-2014-1564 (bmo#1045977) Uninitialized memory use during GIF rendering * MFSA 2014-70/CVE-2014-1565 (bmo#1047831) Out-of-bounds read in Web Audio audio timeline * MFSA 2014-72/CVE-2014-1567 (bmo#1037641) Use-after-free setting text directionality - changes to support compilation on 11.4 * explicit xz BuildRequires * mozilla-nullptr-gcc45.patch * remove unresolved makeinfo BuildRequires - adapted _constraints, used more than 3900MB on s390x during last build ==== MozillaThunderbird ==== Version update (31.0 -> 31.1.0) Subpackages: MozillaThunderbird-translations-common - update to Thunderbird 31.1.0 (bnc#894370) * MFSA 2014-67/CVE-2014-1553/CVE-2014-1562 Miscellaneous memory safety hazards * MFSA 2014-68/CVE-2014-1563 (bmo#1018524) Use-after-free during DOM interactions with SVG * MFSA 2014-69/CVE-2014-1564 (bmo#1045977) Uninitialized memory use during GIF rendering * MFSA 2014-70/CVE-2014-1565 (bmo#1047831) Out-of-bounds read in Web Audio audio timeline * MFSA 2014-72/CVE-2014-1567 (bmo#1037641) Use-after-free setting text directionality - added mozilla-nullptr-gcc45.patch to build on gcc 4.5 dists (e.g. openSUSE 11.4) ==== branding-openSUSE ==== Subpackages: dynamic-wallpaper-branding-openSUSE gfxboot-branding-openSUSE grub2-branding-openSUSE plymouth-branding-openSUSE wallpaper-branding-openSUSE xfce4-splash-branding-openSUSE yast2-qt-branding-openSUSE - fix merge conflicts - Lower openSUSE logo in grub2 by 5px to improve spacing under OS title - replace grub2 openSUSE logo with high resolution badge - add openSUSE logo to gfxboot images - new yast branding location now handled by git makefile, remove mv from spec file - Initial openSUSE 13.2 branding - yast branding needs to be installed in /usr/share/YaST2/theme/current now ==== bzip2 ==== Subpackages: libbz2-1 libbz2-1-32bit libbz2-devel - revert the bzip2-handle_pipe_input_with-f_option.patch because it breaks other programs using the bzip2 library - Implement %check - handle pipe input with the -f option (bnc#884004) * added bzip2-handle_pipe_input_with-f_option.patch ==== cmake ==== - Add possible patch to fix random test failure * cmake-fix-module-loading-test.patch ==== cups ==== Subpackages: cups-client cups-devel cups-libs cups-libs-32bit - Let fdupes only create symlinks in /usr/share/cups/templates/ to avoid a symlink /usr/share/cups/webcontent/images/cups-icon.png because the cupsd web server does no longer follow symlinks to avoid the security issues mentioned in the previous entry below (fixes bnc#892587 a regression of bnc#887240). - str4450.CVE-2014-3537.str4455.CVE-2014-5029.CVE-2014-5030.CVE-2014-5031.CUPS-1.5.4.patch fixes that the web interface incorrectly served symlinked files and files that were not world-readable, potentially leading to a disclosure of information (CVE-2014-3537 STR #4450 plus the subsequent CVE-2014-5029 CVE-2014-5030 CVE-2014-5031 STR #4455 all in bnc#887240). ==== digikam ==== Version update (4.1.0 -> 4.2.0) Subpackages: digikam-doc kipi-plugins kipi-plugins-acquireimage kipi-plugins-geolocation libkface-devel libkface2 libkgeomap-devel libkgeomap1 libmediawiki-devel libmediawiki1 - Update to 4.2.0 digikam: - AlbumGui : New view on left sidebar to search quickly items with assigned Labels. Details: http://mohamedanwer.wordpress.com/2014/07/17/the-great-merging-day/ - AlbumGui : Tags view: add a new option to show items with no tag. Details: http://mohamedanwer.wordpress.com/2014/07/11/tags-left-sidebar-supports-new… - Geberal : Add retina display support with preview and editor canvas under OSX. - 16 fixed bugs (kde#336851, kde#336650, kde#326019, kde#337231, kde#337392, kde#262175, kde#262167, kde#286463, kde#337417, kde#160363, kde#330976, kde#337507, kde#337688, kde#160363, kde#132827, kde#337993) kipi-plugins: - 4 fixed bugs (kde#313203, kde#334089, kde#336835, kde#256466) - adapt remove-gplv2-only.patch - dropped QtGstreamer-1.0.patch (added upstream) - Added QtGstreamer-1.0.patch to support QtGstreamer 1.x API (applied on Factory/13.2 only) - Build with gstreamer-plugins-qt-devel for those openSUSE versions ==== doxygen ==== Version update (1.8.7 -> 1.8.8) - Doxygen 1.8.8 - New features: * Support for PlantUML * Add BREAD_CRUMB_TRAIL - A selection of bug fixes and updates as listed in http://www.stack.nl/~dimitri/doxygen/manual/changelog.html#log_1_8_8 ==== e2fsprogs ==== Version update (1.42.11 -> 1.42.12) Subpackages: e2fsprogs-devel libcom_err-devel libcom_err2 libcom_err2-32bit libext2fs-devel libext2fs2 - Update to 1.42.12 * fix e2fsck bugs when repairing bigalloc filesystems * fix rare e2fsck bugs discovered by fs fuzzing * resize2fs will use less memory when resizing large filesystems ... ==== elfutils ==== Subpackages: libasm1 libdw1 libelf1 libelf1-32bit - Package changes file to support local rpmbuild (bnc#879011) ==== glew-devel ==== Subpackages: libGLEW1_10 - Fix baselibs.conf (bnc#894331). ==== glibc-32bit ==== Subpackages: glibc-locale-32bit - iconv-ibm-sentinel-check.patch: Fix crashes on invalid input in IBM gconv modules (CVE-2014-6040, bnc#894553, BZ #17325) ==== glibc ==== Subpackages: glibc-devel glibc-extra glibc-info glibc-locale nscd - iconv-ibm-sentinel-check.patch: Fix crashes on invalid input in IBM gconv modules (CVE-2014-6040, bnc#894553, BZ #17325) ==== gnutls ==== Version update (3.2.16 -> 3.2.17) Subpackages: libgnutls-devel libgnutls-openssl27 libgnutls28 libgnutls28-32bit - Upgrade to Version 3.2.17 (released 2014-08-24) * * libgnutls: initialize parameters variable on PKCS #8 decryption. * * libgnutls: Explicitly set the exponent in PKCS #11 key generation. That improves compatibility with certain PKCS #11 modules. Contributed by Wolfgang Meyer zu Bergsten. * * libgnutls: gnutls_pkcs12_verify_mac() will not fail in other than SHA1 algorithms. * * libgnutls: when checking the hostname of a certificate with multiple CNs ensure that the "most specific" CN is being used. * * libgnutls: In DTLS ignore only errors that relate to unexpected packets and decryption failures. Delete files: gnutls-3.2.16.tar.xz, gnutls-3.2.16.tar.xz.sig Add files: gnutls-3.2.17.tar.xz, gnutls-3.2.17.tar.xz.sig ==== libibus-1_0-5 ==== Subpackages: typelib-1_0-IBus-1_0 - Do not only requires typelib-1_0-Gtk-3_0 when building with python3. - Update ibus xim script to properly detect GNOME 3.12+ and to use ibus default configuration on first startup of GNOME (bnc#862589 internal), with help from Takashi Iwai. ==== libicu-devel ==== Subpackages: libicu53_1 - Build both B and L-type endianess variants of icudt53.dat so that icu-data really is arch-independent again - Add icu-error-reporting.diff ==== install-initrd-openSUSE ==== Version update (14.129 -> 14.134) - really use nfs-kernel-server - 14.134 - use 'upgrade' (lower case, as expected by latest gfxboot) - add ftp, nfs & samba server to rescue-server - 14.133 - fix mkbootdisk (bnc #892339) - 14.132 - prepare for new yast2-theme - package split: util-linux-systemd - move libgcrypt20-hmac to initrd, as gpg and libgcrypt20 live there already - 14.131 - ensure autoyast files in /var are writable - add back libgcrypt20-hmac and libcryptsetup4-hmac dependency - 14.130 ==== kdelibs4-branding-openSUSE ==== Subpackages: kdm-branding-openSUSE ksplash-qml-branding-openSUSE ksplashx-branding-openSUSE susegreeter-branding-openSUSE - fix merge conflicts - Lower openSUSE logo in grub2 by 5px to improve spacing under OS title - replace grub2 openSUSE logo with high resolution badge - add openSUSE logo to gfxboot images - new yast branding location now handled by git makefile, remove mv from spec file - Initial openSUSE 13.2 branding - yast branding needs to be installed in /usr/share/YaST2/theme/current now ==== kdump ==== - Write proper regex into multipath.conf to prevent syntax error there (bnc#883883) Add: 0001-multipath-Write-proper-regex-into-multipath-conf.patch ==== krb5 ==== Version update (1.12.1 -> 1.12.2) Subpackages: krb5-32bit krb5-client krb5-devel - krb5 5.12.2: * Work around a gcc optimizer bug that could cause DB2 KDC database operations to spin in an infinite loop * Fix a backward compatibility problem with the LDAP KDB schema that could prevent krb5-1.11 and later from decoding entries created by krb5-1.6. * Avoid an infinite loop under some circumstances when the GSS mechglue loads a dynamic mechanism. * Fix krb5kdc argument parsing so "-w" and "-r" options work togetherreliably. - Vulnerability fixes previously fixed in package via patches: * Handle certain invalid RFC 1964 GSS tokens correctly to avoid invalid memory reference vulnerabilities. [CVE-2014-4341 CVE-2014-4342] * Fix memory management vulnerabilities in GSSAPI SPNEGO. [CVE-2014-4343 CVE-2014-4344] * Fix buffer overflow vulnerability in LDAP KDB back end. [CVE-2014-4345] - updated patches: * krb5-1.7-doublelog.patch for context change * krb5-1.6.3-ktutil-manpage.dif, same - removed patches, in upstream: * krb5-master-keyring-kdcsync.patch * krb5-1.12-CVE-2014-4341-CVE-2014-4342.patch * krb5-1.12-CVE-2014-4343-Fix-double-free-in-SPNEGO.patch * krb5-1.12-CVE-2014-4344-Fix-null-deref-in-SPNEGO-acceptor.patch * krb5-1.12-CVE-2014-4345-buffer-overrun-in-kadmind-with-LDAP-backend.patch - Fix build with doxygen 1.8.8 - adding krb5-1.12-doxygen.patch from upstream ==== krename ==== - Add patch fix-freetype2-includes.patch to ensure that the right freetype2 includes are found ==== leafpad ==== - applied spec-cleaner ==== libXaw3d8 ==== - Add baselibs.conf as source. - Add obsoletes to baselibs.conf. ==== libevdev-tools ==== Subpackages: libevdev2 - Add git repository metadata ==== libfm ==== Version update (1.2.1 -> 1.2.2.1) Subpackages: libfm-gtk4 libfm-lang libfm4 lxshortcut - new upstream version 1.2.2.1 * Fix installation of libfm-extra.pc file for development with it. - changes on 1.2.2 since 1.2.1: * Fixed display name of created shortcut after dropping from another application. * Fixed the screen for context in fm_launch_command_simple(). * Added KDE archiver "Ark" into archivers list. * Fixed parsing order of directories in XDG_DATA_DIRS and XDG_CONFIG_DIRS. * Added a possibility for application that was started (by PCManFM or any other application that uses LibFM) to never die after our application (i.e. its parent) was closed. * Fixed possible memory leak in fm_config_load_from_file(). * Corrected g_content_type_guess() call with file sample. This may help with correct file type detection. * When calculate total file sizes in directory, filesize of directory now is skipped. * Fixed problem with memory consumption in case image has big dimension but not so big filesize - in that case loading may consume all the available memory to create bitmap. The file dimensions should also be checked against thumbnail_max configuration variable. * Fixed problem with starting custom command from application selection dialog. This stopped to work with new GLib versions. ==== libgcrypt-devel ==== Subpackages: libgcrypt20 libgcrypt20-32bit - fix an issue in DRBG patchset * size_t type is 32-bit on 32-bit systems - fix a potential NULL pointer deference in DRBG patchset * patches from https://bugs.g10code.com/gnupg/issue1701 - added v9-0001-SP800-90A-Deterministic-Random-Bit-Generator.patch - added v9-0007-User-interface-to-DRBG.patch - removed v7-0001-SP800-90A-Deterministic-Random-Bit-Generator.patch - removed v7-0007-User-interface-to-DRBG.patch - add a subpackage for CAVS testing * add cavs_driver.pl and cavs-test.sh from the kernel cavs package * added drbg_test.patch ==== libkolab0 ==== Version update (0.5.2 -> 0.5.3) - New upstream release 0.5.3 ==== libkolabxml1 ==== Version update (1.0.1 -> 1.0.2) - New upstream release 1.0.2 - Dropped the following patches, as they're now included upstream: - libkolabxml-1.0.1_xsd_type.patch - libkolabxml-1.0.1_csharp_bindings.patch ==== libQt5Core5 ==== Subpackages: libQt5DBus5 libQt5Gui5 libQt5Widgets5 - Added upstream patches for bnc#890168 * libqt5-fix-leak-with-touch-devices-in-xcb.patch, QTBUG-39596 * * fixed a leak what did not free m_touchDevices. * libqt5-listen-to-touch-events-on-the-master-device.patch, QTBUG-38625 * * listen to touch events on the master device instead of slave, was also affects by fdo#78345 * libqt5-avoid-crash-during-querying-device.patch, QTBUG-40820 * * avoid crashes if querying device that has gone away ==== libvirt ==== Version update (1.2.7 -> 1.2.8) Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-driver-xen libvirt-daemon-qemu libvirt-daemon-xen - Update to libvirt 1.2.8 - virDomainBlockCopy with XML destination, typed params - Introduce API for retrieving bulk domain stats - Introduce virDomainOpenGraphicsFD API - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - bnc#893999: remove mount rules from libvirt-lxc apparmor abstraction file as those aren't handled by our kernel. apparmor-no-mount.patch - bnc#894232 - Update apparmor profile to allow raw packets install-apparmor-profiles.patch - remove not necessary hunks from libvirt-ppc64le-support.patch - move new patches to section for to be upstreamed - add patch: libvirt-power8-models.patch add current power8 cpu models to map - add patch: libvirt-ppc64le-support.patch add preliminary ppc64le support to libvirt - bnc#820399 - virsh blockcopy should refuse identical device blockcopy-check-dst-identical-device.patch - Update to libvirt 1.2.7 - Introduce virConnectGetDomainCapabilities - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: dba3432b-virt-lxc-convert-fix.patch, 9b1e4cd5-skip-useless-apparmor-files.patch, 9265f8ab-apparmor-lxc-rework.patch, add-nocow-to-vol-xml.patch, lxc-keep-caps-feature.patch, lxc-keep-caps-feature-conversion.patch, lxc-keep-caps-feature-doc.patch, lxc-net-target-name.patch, lxc-net-target-name-conversion.patch, lxc-net-target-name-doc.patch - lxc AppArmor profile now only restricting potentially dangerous accesses. fdo#886460 - Add virt-lxc-convert to libvirt-daemon-driver-lxc package - added patches: * 9265f8ab-apparmor-lxc-rework.patch * 9b1e4cd5-skip-useless-apparmor-files.patch - virt-lxc-convert: force free to output values in bytes - added patches: * dba3432b-virt-lxc-convert-fix.patch - lxc: allow setting a custom name for container NICs as LXC is is able to do it. lxc-net-target-name.patch, lxc-net-target-name-conversion.patch, lxc-net-target-name-doc.patch - Move 'Requires' of qemu from libvirt-daemon-qemu subpackage to libvirt-daemon-driver-qemu bnc#885267 - Temporarily disable virt-aa-helper-test, which fails in Factory - Update to libvirt 1.2.6 - libxl: add migration support and fixes - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patch libxl-migration-support.patch - Drop ia64-clone.patch since libvirt is not built for IA64 - lxc-keep-caps-feature.patch: allow to keep/drop additional capabilities for LXC containers. bnc#881465 - lxc-keep-caps-feature-conversion.patch: convert lxc.cap.drop to the new domain configuration. - lxc-keep-caps-feature-doc.patch: documentation for the new feature. - Disable failing virportallocatortest on aarch64 - Update to libvirt 1.2.5 - Introduce virDomain{Get,Set}Time APIs - Introduce virDomainFSFreeze() and virDomainFSThaw() public API - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: b98bf811-add-paravirt-shutdown-flag.patch, c4fe29f8-use-shutdown-flag.patch, da744120-use-reboot-flag.patch, d6b27d3e-CVE-2014-0179.patch, fd43d1f8-libxl-iface-hostdev.patch, 99f50208-managed-hostdev-iface.patch, 292d3f2d-libselinux-build-fix1.patch, b109c097-libselinux-build-fix2.patch - Add upstream patches that fix build with libselinux 2.3 Added: 292d3f2d-libselinux-build-fix1.patch, b109c097-libselinux-build-fix2.patch Dropped: libselinux-build-fix.patch - Fix the build breakers brought by libselinux 2.3. libselinux-build-fix.patch - spec: libvirt-daemon package owns /etc/libvirt, not libvirt-client bnc#878056 - libxl: Fix <interface type='hostdev'> syntax for SR-IOV devices fd43d1f8-libxl-iface-hostdev.patch, 99f50208-managed-hostdev-iface.patch - Update to libvirt 1.2.4 - Primarily a bug-fix release. See http://libvirt.org/news.html for a detailed list of bug fixes and improvements - Drop upstream patches: 0e0c1a74-domid-fix.patch, 7a1452f5-libxl-empty-cdrom.patch - libxl: Support ACPI shutdown event b98bf811-add-paravirt-shutdown-flag.patch, c4fe29f8-use-shutdown-flag.patch, da744120-use-reboot-flag.patch bnc#872777 - libx: Support migration libxl-migration-support.patch bnc#875193 - CVE-2014-0179: Don't expand entities when parsing XML d6b27d3e-CVE-2014-0179.patch bnc#873705 - blacklist one more unit test for qemu_linux_user builds - libxl: Set disk format for empty cdrom device 0e0c1a74-domid-fix.patch, 7a1452f5-libxl-empty-cdrom.patch bnc#872517 - Fate#315125: add NOCOW flag add-nocow-to-vol-xml.patch - Removed libxl-hvm-vnc.patch: went upstream in another form - Update to libvirt 1.2.3 - add new virDomainCoreDumpWithFormat API - conf: Introduce virDomainDeviceGetInfo API - more features and fixes on bhyve driver - lot of cleanups and improvement on the Xen driver - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Add /usr/sbin/rc{libvirtd,virtlockd,libvirt-guests} symlinks to preserve backwards compatibility bnc#868190 - Improve lock manager comments in qemu.conf Updated suse-qemu-conf.patch - Create /etc/libvirt/hooks to allow using hook scripts - Update to libvirt 1.2.2 - add LXC from native conversion tool - vbox: add support for v4.2.20+ and v4.3.4+ - CVE-2013-6456 (bnc#857490) - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: 37564b47-xend-parse-response.patch, 4f20084-fix-apparmor-install-patch.patch - Add local disable-virCgroupGetPercpuStats-test.patch to disable failing virCgroupGetPercpuStats test in 'make check' - daemon-qemu: Require qemu instead of kvm to align with recent changes to the qemu package structure - spec: fix dependencies of daemon-config-network and daemon-config-nwfilter subpackages. Influenced by upstream commits cf76c4b3 and dca5ce4c - Remove libvirtd, virtlockd, and libvirt-guests init scripts when using systemd bnc#863540 - Fix the path to libvirtd AppArmor template profile - Fix parsing xend http response 37564b47-xend-parse-response.patch rhb#1055165 - Add CAP_SYS_PACCT capability to libvirtd AppArmor profile Modified install-apparmor-profiles.patch bnc#817407 - Fix build on code 11 - Fix rpmlint warning - Following the upstream pattern, introduce the daemon-config-network subpackage to handle defining the default network bnc#859041 - Update to libvirt 1.2.1 - CVE-2014-0028, CVE-2014-1447, CVE-2013-6458, CVE-2013-6457, CVE-2013-6436 - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Dropped upstream patches: 5e397d9c-test-fix-dbus-crash.patch, 78af457e-fix-virnettlscontexttest.patch, 9faf3f29-LXC-memtune.patch, f8c1cb90-CVE-2013-6436.patch, libxl-hvm-nic.patch - Ignore 'make check' on older, code 11 base - Fixed and reenabled unit tests. bnc#854694 - Remove dependency on pm-utils from libvirt-client bnc#856381 - CVE-2013-6436: Fix crashes in lxc memtune code, one of which results in DoS f8c1cb90-CVE-2013-6436.patch, 9faf3f29-LXC-memtune.patch bnc#854486 - More adjustments to the spec file to fix package dependency issues bnc#848918 - Update to libvirt 1.2.0 - Add support for gluster pool - Separation of python binding - vbox: add support for 4.3 APIs - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Updated and renamed clone.patch to ia64-clone.patch - Enabled numad support for openSUSE >= 13.1 - Link with same versions of libnl used by netcontrol to prevent crashing libvirtd on start - Add '/etc/sasl2' to libvirt-client file list to fix Factory build - Fix starting of libvirtd when NetworkManager is enabled Modified libvirt-suse-netcontrol.patch - Allow execution of libvirt hook scripts in /etc/libvirt/hooks/ in libvirtd AppArmor profile - Update to libvirt 1.1.4 - Add support for AArch64 architecture - Various improvements on test code and test driver - Don't link virt-login-shell against libvirt.so - Close all non-stdio FDs in virt-login-shell - Only allow 'stderr' log output when running setuid - Fix perms for virConnectDomainXML{To,From}Native - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: e7f400a1-CVE-2013-4296.patch, 2dba0323-CVE-2013-4297.patch, db7a5688-CVE-2013-4311.patch, e65667c0-CVE-2013-4311.patch, 922b7fda-CVE-2013-4311.patch, e4697b92-CVE-2013-4311.patch, 8294aa0c-CVE-2013-4399.patch, 484cc321-fix-spice-migration.patch, 79552754-libvirtd-chardev-crash.patch, 57687fd6-CVE-2013-4401.patch, ae53e5d1-CVE-2013-4400.patch, 8c3586ea-CVE-2013-4400.patch, b7fcc799a-CVE-2013-4400.patch, 3e2f27e1-CVE-2013-4400.patch, 5a0ea4b7-CVE-2013-4400.patch, 843bdb2f-CVE-2013-4400.patch, bd773e74-lxc-terminate-machine.patch, e350826c-python-fix-fd-passing.patch - Allow execution of Xen binaries in /usr/lib{,64}/xen/bin in libvirtd AppArmor profile bnc#849524 - Require libvirt-daemon-<hypervisor> in the main libvirt package for each supported hypervisor bnc#850882 - Fix initialization of libxl NIC devices libxl-hvm-nic.patch bnc#848918 - Fix typo in libvirtd apparmor profile which prevented the profile from loading bnc#848216 - libxl driver: fix initialization of VNC and SDL info for HVM domains libxl-hvm-vnc.patch bnc#847566 - Allow libvirtd apparmor profile to access /etc/xen/scripts/* - Fix file descriptor passing in python bindings e350826c-python-fix-fd-passing.patch rhb#1021434 - Have systemd terminate the machine as a workaround of fdo#68370 bd773e74-lxc-terminate-machine.patch bnc#842834 - Spec file fixes to only package libvirt-login-shell when building the LXC driver - CVE-2013-4400: Unsantized use of env variables allows privilege escalation via virt-login-shell ae53e5d1-CVE-2013-4400.patch, 8c3586ea-CVE-2013-4400.patch, b7fcc799a-CVE-2013-4400.patch, 3e2f27e1-CVE-2013-4400.patch, 5a0ea4b7-CVE-2013-4400.patch, 843bdb2f-CVE-2013-4400.patch bnc#837609 - CVE-2013-4401: Fix perms for virConnectDomainXML{To,From}Native 57687fd6-CVE-2013-4401.patch bnc#845704 - Move hypervisor-specific files out of libvirt-daemon package and into libvirt-daemon-<hypervisor> subpackage bnc#845851 - conf: Don't crash on invalid chardev source definition 79552754-libvirtd-chardev-crash.patch bnc#845704, rhb#1012196 - Use newer libnl3 instead of libnl-1_1 bnc#845540 - Move virt-login-shell to new subpackage libvirt-login-shell, requiring users to opt-in for this setuid binary. Note: For now, virt-login-shell will not have setuid permissions, pending resolution of bnc#837609 - qemu: Fix seamless SPICE migration 484cc321-fix-spice-migration.patch bnc#842301 - CVE-2013-4399: Fix crash in libvirtd when events are registered and ACLs active 8294aa0c-CVE-2013-4399.patch bnc#844052, bnc#842300 - Update the stale gettext BuildRequires and Requires dependencies in the spec file bnc#841325 - virt-aa-helper apparmor profile was denying read access to /proc/$PID/*. Give read accesss to these files. Updated install-apparmor-profiles.patch bnc#841720 - libvirtd apparmor profile was denying access to /usr/lib/xen/bin/qemu-system-i386, which is now the default emulator used with Xen guests Updated install-apparmor-profiles.patch bnc#845648 - Fix condrestart|try-restart invocation of virtlockd init script Modifed virtlockd-init-script.patch - CVE-2013-4311: Add support for using 3-arg pkcheck syntax for process db7a5688-CVE-2013-4311.patch, e65667c0-CVE-2013-4311.patch, 922b7fda-CVE-2013-4311.patch, e4697b92-CVE-2013-4311.patch bnc#836931 - CVE-2013-4296: Fix crash in remoteDispatchDomainMemoryStats e7f400a1-CVE-2013-4296.patch bnc#838638 - CVE-2013-4297: Fix crash in virFileNBDDeviceAssociate 2dba0323-CVE-2013-4297.patch bnc#838642 - Update to libvirt 1.1.2 - various improvements to libxl driver - systemd integration improvements - Add flag to BaselineCPU API to return detailed CPU features - Introduce a virt-login-shell binary - conf: add startupPolicy attribute for harddisk - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: bcef0f01-libxl-console.patch, 9d0557b9-legacy-xen-double-free.patch, d7a45bf2-legacy-xen-dumpxml.patch, 0e671a16-CVE-2013-4239.patch - Includes fixes for bnc#837530, bnc#837531, bnc#837999 - Fix memory corruption in legacy Xen driver 0e671a16-CVE-2013-4239.patch bnc#834598 - Upstream patches to fix dumpxml in legacy Xen driver 9d0557b9-legacy-xen-double-free.patch, d7a45bf2-legacy-xen-dumpxml.patch - Backport upstream patch implementing domainOpenConsole in the libxl driver. Allows 'virsh console dom-name' to work with Xen libxl toolstack. bcef0f01-libxl-console.patch - Update to libvirt 1.1.1 - Adding device removal or deletion events - Introduce new domain create APIs to pass pre-opened FDs to LXC - Add interface versions for Xen 4.3 - Add new public API virDomainSetMemoryStatsPeriod - Various LXC improvements - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: f38c8185-CVE-2013-2230.patch, fd2e3c4c-xen-sysctl-domctl.patch, dfc69235-CVE-2013-4153.patch, 96518d43-CVE-2013-4154.patch, fe89fd3b-storage-pool-deadlock.patch - Drop relax-qemu-usergroup-check.patch - no longer needed after hypervisor-specific daemon package split - Unlock the storage volume object after looking it up fe89fd3b-storage-pool-deadlock.patch rhb#980676 - CVE-2013-4153: Fix double free of returned JSON array in qemuAgentGetVCPUs() dfc69235-CVE-2013-4153.patch - CVE-2013-4154: Prevent crash of libvirtd without guest agent configuration 96518d43-CVE-2013-4154.patch bnc#830498 - Fix legacy xen driver with Xen 4.3 fd2e3c4c-xen-sysctl-domctl.patch - CVE-2013-2230: Fix crash when multiple event callbacks were registered f38c8185-CVE-2013-2230.patch bnc#827801 - Update to libvirt 1.1.0 - Extensible migration APIs - Add a policy kit access control driver - various improvements in the Xen and libxl drivers - improve networking support on BSD - agent based vCPU hotplug support - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: 244e0b8c-CVE-2013-2218.patch - Only require lzop if suse_version > 1210 - Fix typo in spec file - Enable support for netcontrol by default - Only require libvirt-daemon-driver-interface when building the interface driver - CVE-2013-2218: Fix crash listing network interfaces with filters 244e0b8c-CVE-2013-2218.patch - Add xencommons as 'Wanted' in the systemd libvirtd service file systemd-service-xen.patch bnc#820888 - Fix build for SLE11 SP2 - Add a README to the empty packages. Provides some info about their purpose and satisfies suse-filelist-empty check. Drop rpmlintrc - Fix typo in spec file: devel package requires doc package, not docs - Add rpmlintrc to get around suse-filelist-empty error on older distros. - Refactor libvirt spec file to create subpackages for the various libvirtd components. This allows installing a libvirtd tailored for the underlying virtualizer. E.g. on a KVM/QEMU virtualizer only the libvirt-daemon-qemu package needs installed. Similarly, only libvirt-daemon-xen on a Xen virtualizer and libvirt-daemon-lxc on LXC. - Update to libvirt 1.0.6 - Move VirtualBox driver into libvirtd - Support for static routes on a virtual bridge - Various improvement for hostdev SCSI support - Switch to VIR_STRDUP and VIR_STRNDUP - Various cleanups and improvement in Xen and LXC drivers - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: f493d83f-cgroup-swap-control.patch, 486a86eb-cgroups-docs.patch, 0ced83dc-cgroup-escape-dot.patch, bbe97ae9-no-cgroups.patch, c2cf5f1c-no-cgroups-fix.patch, 95c6cc34-selinux.patch - Update to libvirt 1.0.5.1 stable release - qemu: Fix cgroup handling when setting VCPU BW - daemon: fix leak after listing all volumes - Fix iohelper usage with streams opened for read - util: fix virFileOpenAs return value and resulting error logs - iscsi: don't leak portal string when starting a pool - don't mention disk controllers in generic controller errors - conf: don't crash on a tpm device with no backends - qemu: allocate network connections sooner during domain startup - Make detect_scsi_host_caps a function on all architectures - Fix release of resources with lockd plugin - Fix potential use of undefined variable in remote dispatch code - Fix F_DUPFD_CLOEXEC operation args - qemu: fix stupid typos in VFIO cgroup setup/teardown - network: fix network driver startup for qemu:///session - Remove patches that are included in the 1.0.5.1 release 0471637d-cgroups-vcpu-bw.patch, a2214c52-iohelper.patch, ca697e90-CVE-2013-1962.patch - Don't mount selinux fs in LXC if selinux is disabled 95c6cc34-selinux.patch bnc#814680 - fix leak after listing all volumes - CVE-2013-1962 ca697e90-CVE-2013-1962.patch bnc#820397 - Fix iohelper usage with streams opened for read a2214c52-iohelper.patch - Cope with missing swap cgroup controls f493d83f-cgroup-swap-control.patch bnc#819976 - Fix cgroup handling when setting VCPU BW 0471637d-cgroups-vcpu-bw.patch rhb#963592 - Escape a leading '.' with '_' in the cgroup names 0ced83dc-cgroup-escape-dot.patch - Add missing documentation on new cgroup layout 486a86eb-cgroups-docs.patch - Another fix related to systems with no cgroups c2cf5f1c-no-cgroups-fix.patch bnc#819963 - Fix botched backport of commit bbe97ae9 - Fix starting domains when kernel has no cgroups support bbe97ae9-no-cgroups.patch - Update to libvirt 1.0.5 - PPC64: Add NVRAM device - Add XML config for resource partitions - Add support for TPM - NPIV storage migration support - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Update to libvirt 1.0.4 - qemu: support passthrough for iscsi disks - various S390 improvements - various LXC bugs fixes and improvements - add API for thread cancellation - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: ce4557c3-apparmor-tapfd-label.patch libvirt-iptables-1.4.18.diff - add libvirt-iptables-1.4.18.diff, fix masquerading with iptables v1.4.18 (--state match is deprectated, use conntrack instead) - Fix PCI device attach for xen HVM domains fix-pci-attach-xen-driver.patch FATE#313570 - Apparmor security driver: Ensure tapfd's are labled when generating the guest profile. Modified install-apparmor-profiles.patch, added upstream patch ce4557c3-apparmor-tapfd-label.patch bnc#807940 - Grant permission to use datagram packets in libvirtd apparmor profile. Remove AF_PACKET.patch, modify install-apparmor-profiles.patch bnc#801145 - Add 'managed' PCI passthrough support to legacy xen driver support-managed-pci-xen-driver.patch FATE#313570 - Update to libvirt 1.0.3 - Introduce virDomainMigrate*CompressionCache APIs - Introduce virDomainGetJobStats API - Add basic support for VDI images - Introduce API virNodeDeviceLookupSCSIHostByWWN - Various locking improvements - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Drop upstream patches: a6b8bae5-python-generator-fix1.patch, 25ea8e47-python-generator-fix2.patch, 567779e5-libxl-default-disk-backend.patch - Fix path to qemu-bridge-helper in libvirt-qemu apparmor profile Modified install-apparmor-profiles.patch - Fix detach of managed PCI devices from inactive domains. Detected while running test cases for FATE #313570. Modified xen-name-for-devid.patch - spec: Fix installation of default network - Fix default setting of backend field of libxl_device_disk 567779e5-libxl-default-disk-backend.patch rhb#912488 - Fix build on IA64 Modified clone.patch - Fix error handling in python bindings a6b8bae5-python-generator-fix1.patch 25ea8e47-python-generator-fix2.patch bnc#802619 - Require modutils instead of module-init-tools. - Update to libvirt 1.0.2 - LXC improvements - S390 architecture improvements - Power architecture improvements - large Coverity report cleanups and associated bug fixes - virTypedParams* APIs to help with those data structures - libxenlight driver improvements - Fixes CVE-2013-0170, bnc#800976 - Drop upstream patches: 68e7bc45-libxl-link-fix.patch, 462a6962-script-fixes1.patch, cb854b8f-script-fixes2.patch, 5ec4b22b-script-fixes3.patch, a1fd56cb-script-fixes4.patch, 66ff2ddc-virtlockd-systemd-file-perms.patch - Unconditionally build sanlock support bnc#799262 - Fix interface management functions that were broken when rebasing libvirt-suse-netcontrol.patch bnc#799444 (SLES bug that affect Factory too) - Update to libvirt 1.0.1 - Introduce virtlockd daemon - parallels: add disk and network device support - Add virDomainSendProcessSignal API - Introduce virDomainFSTrim() public API - add fuse support for libvirt lxc - Add Gluster protocol as supported network disk backend - various snapshot improvements - Add upstream patches to fix bugs in 1.0.1 66ff2ddc-virtlockd-systemd-file-perms.patch, 462a6962-script-fixes1.patch, cb854b8f-script-fixes2.patch, 5ec4b22b-script-fixes3.patch, a1fd56cb-script-fixes4.patch, 68e7bc45-libxl-link-fix.patch - Rework SUSE patches for the various init scripts Dropped use-init-script-redhat.patch and added libvirtd-init-script.patch, libvirt-guests-init-script.patch, and virtlockd-init-script.patch - Update to libvirt 1.0.0 - virNodeGetCPUMap: Define public API - Add systemd journal support - Add a qemu capabilities cache manager - USB migration support - various improvement and fixes when using QMP QEmu interface - Support for Xen 4.2 in legacy xen driver - Lot of localization enhancements - Drop upstream patches: 371ddc98-xen-sysctl-9.patch, 416eca18-xenstore-header-fix.patch, f644361b-virCommand-env.patch, 2b32735a-virCommand-env.patch, 9785f2b6-fix-xen-sysctl9.patch - Fix Xen sysctl version 9 support 9785f2b6-fix-xen-sysctl9.patch - Add upstream patches to support latest libguestfs f644361b-virCommand-env.patch 2b32735a-virCommand-env.patch - Fix build when using -werror 416eca18-xenstore-header-fix.patch - Support Xen sysctl version 9 371ddc98-xen-sysctl-9.patch bnc#781425 - Temporarily disable building libxl driver. The current implementation does not support libxl in Xen 4.2. - Update to libvirt 0.10.2 - network: define new API virNetworkUpdate - add support for QEmu sandbox support - blockjob: add virDomainBlockCommit - node_memory: Define the APIs to get/set memory parameters - list: Define new API virConnectListAllSecrets - list: Define new API virConnectListAllNWFilter - list: Define new API virConnectListAllNodeDevices - list: Define new API virConnectListAllInterfaces - list: Define new API virConnectListAllNetworks - list: Define new API virStoragePoolListAllVolumes - list: Define new API virStorageListAllStoragePools - parallels: add support of containers to the driver - Add PMSUSPENDED life cycle event - Add per-guest S3/S4 state configuration - qemu: Support for Block Device IO Limits - Update to libvirt 0.10.1 - Bug fix release for critical bugs in 0.10.0 - Drop upstream patch f781e276-xen-driver-fix.patch - Update to libvirt 0.10.0 - agent: add qemuAgentArbitraryCommand() - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo - network: use firewalld instead of iptables, when available - network: make network driver vlan-aware - esx: Implement network driver - driver for parallels hypervisor - Various LXC improvements - Add virDomainGetHostname - Drop upstream patches 4036aa91-systemd.patch 6039a2cb-CVE-2012-3445.patch - Fix xen driver following changes to make it stateful f781e276-xen-driver-fix.patch bnc#778006 - Update to libvirt 0.9.13 - S390: support for s390(x) - snapshot: implement new APIs for esx and vbox - snapshot: new query APIs and many improvements - virsh: Allow users to reedit rejected XML - nwfilter: add DHCP snooping - storage backend: Add RBD (RADOS Block Device) support - sVirt support for LXC domains inprovement - Drop upstream patches 0dda594d-libvirtd-shutdown-deadlock.patch 9c77bf04-fix-virnetserver-refcnt.patch 57349ffc-lxc-ctrl.patch revert-d8978c90.patch _ Update to libvirt 0.9.12 - qemu: allow snapshotting of sheepdog and rbd disks - blockjob: add new AP - many bug fixes and improvements - daemon: Fix crash in virTypedParameterArrayClear CVE-2012-3445 6039a2cb-CVE-2012-3445.patch bnc#773955 - libvirtd.service: ensure libvirtd starts after network 4036aa91-systemd.patch bnc#767932 - Add upstream patch to fix ref count of virNetServer object 9c77bf04-fix-virnetserver-refcnt.patch - Fix libvirtd deadlock on shutdown 0dda594d-libvirtd-shutdown-deadlock.patch bnc#767797 - Fix segfault in libvirt_lxc 57349ffc-lxc-ctrl.patch bnc#767448 - Fix build on i586 revert-d8978c90.patch - Update to libvirt 0.9.11.4 stable release - VUL-1: Fix hotplug support for usb devices with same vendorID, productID 9914477e-usb-search-funcs.patch 05abd150-usb-improve-hotplug.patch bnc#766559 - Add capability 'audit_write' to libvirtd apparmor profile update install-apparmor-profiles.patch bnc#764388 - Update to libvirt 0.9.11.3 stable release - Copy user in virURIParse 4eb1c256-viruri-user.patch bnc#757766 - yajl is availabile in all supported SUSE products, so always use it when building libvirtd - Update to libvirt 0.9.11 - Add support for the suspend event - Add support for event tray moved of removable disks - qemu: Support numad - cpustats: API, improvements and qemu support - qemu: support type='hostdev' network devices at domain start - Introduce virDomainPMWakeup API - network: support Open vSwitch - snapshot improvements - Remove unconditional define of 'with_netcontrol' - Add a note in /etc/libvirt/qemu.conf describing administrator vigilance required when enabling a lock manager such as sanlock - Recommend dmidecode if suse_version > 1110. dmidecode is used by virConnectGetSysinfo. - Add upstream patches to fix issues with older PolicyKit c05ec920-polkit0-build.patch fcdfa31f-polkit0-auth.patch - Update to libvirt 0.9.10 - Add support for sVirt in the LXC driver - Add new API virDomainBlockRebase - Add api to set and get domain metadata - virDomainGetDiskErrors public API - Add rawio attribute to disk element of domain XML - Introduce virDomainPMSuspendForDuration API - Add virStorageVolResize() API - Add a virt-host-validate command to sanity check HV config - Add new virDomainShutdownFlags API - QEMU guest agent support - Fix libvirtd apparmor profile to work with libxenlight toolstack Updated install-apparmor-profiles.patch bnc#745890 - Fix init script packaging after enabling systemd support - Fix %files after enabling sanlock support - Enable libvirt integration with sanlock - During configure, libvirt checks for availability of iptables binary and doesn't actually use anything from iptables-devel package, hence only need 'BuildRequires: iptables'. - Update to libvirt 0.9.9 - Add new API virDomain{S,G}etInterfaceParameters - Add new API virDomain{G,S}etNumaParameters - Add support for ppc64 qemu - Support Xen domctl v8 - Fixup systemd support as per openSUSE systemd packaging guidelines. - Use %fdupes for duplicate file checking instead of hand-rolled function - CVE-2011-4600: unintended firewall port exposure after restarting libvirtd when defining a bridged forward-mode network ae1232b2-CVE-2011-4600.patch bnc#736082 - Post-0.9.8 upstream systemd patches 10404671-systemd-build-fix.patch 478a4d07-systemd-build-fix.patch - Update to libvirt 0.9.8 - Add support for QEMU 1.0 - Add first parts of PPC cpu driver - Add new API virDomain{Set, Get}BlockIoTune - block_resize: Define the new API - Add a public API to invoke suspend/resume on the host - Various improvements for LXC containers - Define keepalive protocol and add virConnectIsAlive API - Add support for STP and VLANfiltering - Numerous bug fixes and improvements - Add support for QEMU 1.0 dd8e8956-qemu-1.0.patch bnc#736569 - Allow qemu driver (and hence libvirtd) to load when qemu user:group does not exist. The kvm or qemu package, which may not exist on a xen host, creates qemu user:group. relax-qemu-usergroup-check.patch - Handle empty strings in s-expression returned by xend a495365d-sexpr-empty-str.patch bnc#731344 - Allow libvirtd to access libvirt_{io,part}helper when confined by apparmor Update install-apparmor-profiles.patch bnc#730435 - Accommodate Xen domctl version 8 xen-domctl-ver8.patch - add libtool as buildrequire to avoid implicit dependency - Fix build when using older PolicyKit d47ab3fe-polkit0.patch - Update to libvirt 0.9.7 - esx: support vSphere 5.x - vbox: support for VirtualBox 4.1 - Introduce the virDomainOpenGraphics API - Add AHCI support to qemu driver - snapshot: many improvements and 2 new APIs - api: Add public api for 'reset' - Add AHCI controller support to qemu driver c1bc3d89-qemu-add-ahci.patch - Set security driver to 'none' in /etc/libvirt/qemu.conf. Users must opt-in for Apparmor confinement of qemu instances. suse-qemu-conf.patch - Revert upstream commit f84aedad, which is not needed since affected SUSE kvm packages have the necessary qemu fix f84aedad-revert.patch - Update to libvirt 0.9.6 - Fix shutdown regression with buggy qemu - Fixed typos in libvirt.spec - Update to libvirt 0.9.5 - many snapshot improvements - latency: Define new public API and structure - USB2 and various USB improvements - storage: Add fs pool formatting - Add public API for getting migration speed - Add basic driver for Microsoft Hyper-V - Many bug fixes and improvements - Enable building with libnetcontrol - Select libnl-1_1-devel - Set qemu migration speed unlimited when migrating to file 7e5f6a51-rpc-generator.patch b12354be-mig-speed-1.patch 1282bd80-mig-speed-2.patch 6f84e110-mig-speed-3.patch 829bce17-mig-speed-4.patch 8fc40c51-mig-speed-5.patch ef1065cf-mig-speed-6.patch 0257ba8f-mig-speed-7.patch bnc#706436 - Increase max size of buffer used to receive xend response 57c95175-xend-buff-size.patch - Don't overwrite useful error messages in legacy xen driver 32620dab-fix-xen-err-msg.patch bnc#711096 - Add upstream patches to stop excessive logging 7f2498ef-no-log-invalid.patch 6ff9fc26-quiet-libxl-logging.patch - Add 'Conflicts: kvm < 0.14.1' to ensure libvirt is using a kvm package that creates qemu user:group. Remove user:group creation from libvirt bnc#694883 - Add libvirt group at package installation bnc#694885 - Explicitly add 'BuildRequires: libgcrypt-devel' since it is no longer required by libgnutls-devel - netcf is buggy and not well maintained in SUSE. Disable it in libvirt - polkit support was mistakenly disabled, re-enable - Add cgconfig to Should-{Start,Stop} in libvirtd init script bnc#712245 - Fix apparmor profile location and content update install-apparmor-profiles.patch bnc#705668 - Fix libvirtd SIGHUP handler 9e093f0b-libvirtd-sighup.patch - add baselibs.conf to sources - Enable apparmor security dirver, SLES bnc#705668 install-apparmor-profiles.patch - Update to libvirt 0.9.4 - bandwidth QoS control - Add new API virDomainBlockPull* - save: new API to manipulate save file images - CPU bandwidth limits support - allow to send NMI and key event to guests - new API virDomainUndefineFlags - Implement code to attach to external QEMU instances - various missing python binding - bios: Add support for SGA - Numerous improvements and documentation / bug fixes - Add some upstream patches to fix memory leaks and some bugs in new rpc code c2ddd536-cert-key-order.patch 3e5d48ef-rpc-1.patch 927dfcf6-rpc-2.patch 2c85644b-rpc-3.patch afe8839f-rpc-4.patch 3cfdc57b-rpc-5.patch 7518ad75-remote-mem-leak.patch a34e193f-statstest.patch 41828514-skip-xen-tests.patch eb314315-pv-kernel-cmdline.patch 00d3c5a6-remove-dead-code.patch b8adfcc6-fix-polkit0-build.patch b2534529-unused-param.patch - Update to libvirt 0.9.3 - vcpupin: introduce the new libvirt API (virDomainGetVcpupinInfo) - Add TXT record support for virtual DNS service - Support reboots with the QEMU driver - Introduce virDomainGetControlInfo API - virNodeGetMemoryStats: Expose new API - virNodeGetCPUTime: Implement public API - send-key: Defining the public API - vcpupin: introduce a new libvirt API (virDomainPinVcpuFlags) - support multifunction PCI device - lxc: various improvements - Create qemu user:group if necessary at package installation. More fallout from bnc#694883 - VUL-0: libvirt: integer overflow in VirDomainGetVcpus 774b21c1-CVE-2011-2511.patch bnc#703084 - Enable building libvirt with audit support bnc#694891 - fate#311371 Enhance yast to configure live migration for Xen and KVM add firewall service file for libvirt - Invoke qemu instances as user:group qemu:qemu by default bnc#694883 - Update to libvirt 0.9.2 - Framework for lock manager plugins - API for network config change transactions (netcf required) - flags for setting memory parameters - virDomainGetState public API - qemu: allow blkstat/blkinfo calls during migration - Introduce migration v3 API - Defining the Screenshot public API - public API for NMI injection - spec file: Adjust some directory attributes to support running non-privileged qemu instances - Remove vi_VN locale if suse_version < 11.3 - Enable cap_ng when building lxc support. - Update to libvirt 0.9.1 - support various persistent domain updates - improvements on memory APIs - Add virDomainEventRebootNew - various improvements to libxl drive - Spice: support audio, images and stream compression - Move libvirt-iohelper from client to base package - fix baselibs.conf not to requires source 32bit - Install log dir for libxl f7e9b448-libxl-build.patch - Update to libvirt 0.9.0 final - Support cpu usage tuning - Add public APIs for storage volume upload/download - Add public API for setting migration speed on the fly - Add libxenlight driver - qemu: support migration to fd - add virDomain{Get,Set}BlkioParameters - introduce a new libvirt API (virDomainSetMemoryFlags) - Expose event loop implementation as a public API - Dump the debug buffer to libvirtd.log on fatal signal - Audit support - Numerous enhancements and bug fixes - Update to libvirt 0.9.0 RC3 - use %first_lang before changing symlinks, find_lang removes unsupported languages - VUL-0: libvirt: several API calls do not honour read-only connection 71753cb7-CVE-2011-1146.patch bnc#678406 - Add baselibs.conf file to build xxbit packages for multilib support bnc#676921 - Minor fixes for libvirt-guests bnc#653398 - Do not add drive 'boot=on' param when a kernel is specified efc2594b-boot-param.patch - Update to libvirt 0.8.8 final - sysinfo: expose new API - cgroup blkio weight support - smartcard device support - qemu: Support per-device boot ordering - Update to libvirt 0.8.8 RC3 - Update to libvirt 0.8.8 RC1 - Remove explicit dependency on libyajl libvirt.spec bnc#668225 - Retry JSON monitor 'cont' cmd on MigrationExpected error 4301b95a-json-cont-cmd.patch - Add support for specifying Hardware Assisted Paging (HAP) in libvirt domain XML. 48a5dccd-hap1.patch 04197350-hap2.patch af521a01-hap3.patch 79f56c66-hap4.patch 094c6f4a-hap-fix.patch bnc#659665 - Enabled yajl for suse_version >= 1140 - Fix generation of dnsmasq's --dhcp-hostsfile option a43c7338-dnsmasq-hostfile-fix.patch - Disable yajl support as the library does not yet exist in SuSE distros. - Support libvirt-guests on SuSE distros use-libvirt-guests-on-suse.patch bnc#653398 - Update to libvirt 0.8.7 - Preliminary support for VirtualBox 4.0 - IPv6 support - Add VMware Workstation and Player driver - Add network disk support - Fix VNC port reservation race in qemu driver c58b1056-init-bitmap-size.patch bnc#659431 - Do not limit insserv_cleanup to SLES - disable building openvz driver - Update to libvirt 0.8.6 - new API virDomainIsUpdated - Add support for iSCSI target auto-discovery - QED: Basic support for QED images - Introduce a virDomainOpenConsole API - Support for SPICE graphics - Add a sysinfo and SMBIOS support - Implement virsh qemu-monitor-command - Enabled yajl, macvtap, and virtualport for suse_version >= 1140 - Fix build when using "policy kit 0" polkit0.patch - Update to libvirt 0.8.5 - Enable JSON and netdev features in QEMU > 0.13 - framework for auditing integration - framework for DTrace/SystemTap integration - Setting the number of vcpu at boot - Enable support for nested SVM - Virtio plan9fs filesystem QEMU - Memory parameter controls - portability to OS-X - lot of bug fixes and other improvements - cannot restart dead libvirtd without manually removing pidfile modified libvirtd.init bnc#645755 - Fix package dependencies so can be installed without pulling excess of optional components - Support dropping capabilities with cap-ng library in openSUSE >= 11.3 - Fix build when virtualport support is available but macvtap is disabled. vport-configure.patch - Fix CDROM media change for Xen PV domains modified xen-pv-cdrom.patch bnc#636231 - Update to libvirt 0.8.4 - various improvements to UML driver - documentation improvements - lot of bug fixes and other improvements - enable ESX driver for openSUSE - Update to libvirt 0.8.3 - Support vSphere 4.1 - Qemu arbitrary monitor commands - Qemu Monitor API entry point - lots of improvements and bug fixes - VUL-0: multiple issues in libvirt CVE-2010-223x-000[1-0].patch, CVE-2010-223x-0010.patch, CVE-2010-2242-nat.patch bnc#618155 - Use netcat-openbsd, which contains a proper 'nc' program supporting the '-U' option. Drop socat.patch. bnc#611023 - Re-enable numa support now that bnc#598488 is resolved. - Allocate buffer to hold xend content bnc#609738 xend-buff-size.patch - Add upstream fixes to bitmap code that was introduced to fix bnc#594024 bitmap-alloc.patch bitmap-fixes.patch - Fix race in VNC port reservation with qemu/KVM domains bnc#594024 vnc-race-{1,2,3}.patch - Don't package directories/files under /var/run - Add upstream commit 34a7f3f6 to fix unintentional breakage of RPC protocol. - Disable numa support in openSUSE11.3/Factory pending resolution of bnc#598488 - Update to libvirt 0.8.1 - Add virDomainGetBlockInfo API to query disk sizing - Start dnsmasq from libvirtd with --dhcp-hostsfile option - lots of improvements and bug fixes - Update to libvirt 0.8.0 - Snapshot API framework - Add managed save API entry points - Timer subselection for domain clock - Add hook utilities - Network filtering API - Introduce a new virDomainUpdateDeviceFlags public API - Introduce a new public API for domain events - Public virDomainMigrateSetMaxDowntime API - Add public API for volume wiping - xenapi: Initial commit of the new driver - lots of improvements and bug fixes - Fix 'virsh dominfo' crash when no security driver is configured fix-no-secdriver.patch - Updated to version 0.7.7 - Introduce public API for domain async job handling - macvtap support - Add QEMU support for virtio channel - Add persistence of PCI addresses to QEMU - Functions for computing baseline CPU from a set of host CPUs - Public API for virDomain{Attach,Detach}DeviceFlags - lots of improvements and bug fixes - Ensure yast-created bridges are not manipulated by libvirt bnc#584757 Modified suse-network.patch - Fix ordering of xen disks to preserve 'bootable' flag bnc#474738 xend-disk-order.patch - Add support for blktap2 disks xen-tap2-support.patch - Fix listing of yast-created bridges bnc#583754 Modified suse-network.patch - Add support for new XEN_DOMCTL_INTERFACE_VERSION version 7. xen-domctl-ver7.patch - Unconditionally add /var/log/libvirt/{qemu,lxc,uml} directories. bnc#579522 - Updated to version 0.7.6 - Implement support for multi IQN - Implement CPU topology support for QEMU driver - Use QEmu new device adressing when possible - Implement SCSI controller hotplug/unplug for QEMU - lots of improvements and bug fixes - Support new XEN_SYSCTL_INTERFACE_VERSION 7 in libvirt bnc#574124 xen-sysctl-v7.patch - Add upstream patches as prelude to fixing various device attach/detach issues devflag-0[1-9].patch - Fix attaching/detaching disk device from inactive Xen guest bnc#500586 and bnc#573748 - Fix migration with Xen4.0 bnc#569598 Add xen-migration-params.patch Remove migrate-params.patch - Fix freeing of uninitialized pointer when using HAL in node device driver node-dev-free.patch - Require virt-utils package for common tools such as qemu-img - Updated to version 0.7.5 - Add new API virDomainMemoryStats to header and drivers - Public API and domain extension for CPU flags - expose SR IOV physical/virtual function relationships - Support for JSON mode monitor [deactivated] - Support for interface model='netfront' - vbox: Add support for version 3.1 - Support QEMU's virtual FAT block device driver - lots of improvements and bug fixes - Fix libvirt xen hypervisor driver to work with domctl interface version 6 xen-shr-pages.patch - Plumb domain description in xend backend xend-description-tag.patch - Fix listing of defined but inactive Xen domains xen-list-defined.patch - Updated to version 0.7.4 - Implement a node device backend using libudev - New APIs for checking some object properties - Fully asynchronous monitor I/O processing - add MAC address based port filtering to qemu - support for IPv6 / multiple addresses per interfaces - lots of improvements and bug fixes - Fix compilation against xen-unstable xen-max-vcpus.patch - Modify detach-disk.patch as per upstream suggestions - spec file: Fix polkit vs PolicyKit Requires - Fix compilation when selinux is enabled selinux-ldflags.patch - Fix compilation warnings updated snapshots.patch virsh-warning.patch - Updated to version 0.7.2 - sVirt AppArmor security driver - Add public API definition for data stream handling - ESX add esxDomainDefineXML() - LXC: suspend/resume support - Big code tree cleanup - Lots of bug fixes and improvements - Add ocfs2 to list of supported fs pool types fate#307387 - Build phyp driver ifarch ppc64 fate#307096 - Fix memory leaks in libvirtd's message processing msg-proc-memleak.patch - Fix connection ref counting in xen drivers xen-refcnt.patch - Fix abort in virsh when specifying a connection URI vshdeinit-recurse.patch - Workaround for missing pkgconfig file in device-mapper-devel devmap-no-pkgconfig.patch bnc#540942 - Updated to version 0.7.1 - Add support for encrypted (qcow) volume creation - Secret manipulation public API - Multipath storage support module - VBox add Storage Volume support - Support configuration of huge pages in guests - Support new PolicyKit 1.0 API - Compressed save image format for Qemu - Qemu add host PCI device hotplug support - Updated to version 0.7.0 - Interface implementation based on netcf (disabled on SuSE) - Add new net filesystem glusterfs - Initial VMWare ESX driver - Add support for VBox 3 and event callbacks on vbox - First version of the Power Hypervisor driver - Run QEMU guests as an unprivileged user (still root on SuSE) - Support cgroups in QEMU driver - QEmu hotplug NIC support - Storage cloning for LVM and Disk backends - Updated to version 0.6.5 - create storage volumes on disk backend - drop of capabilities based on libcap-ng when possible - forbid autostart on transcient networks - re-detection of transient VMs after libvirtd restart - create and destroy NPIV support - other bug fixes and cleanups - Removed unnecessary call to fillup_and_insserv macro in %post scriptlet - Updated to version 0.6.2 - support SASL auth for VNC server - memory ballooning in QEMU - SCSI HBA storage pool support - PCI passthrough in Xen driver - new APIs for Node device detach reattach and reset - sVirt mandatory access control support - thread safety of the API and event handling - allow QEmu domains to survive daemon restart - extended logging capabilities - support copy-on-write storage volumes - support of storage cache control options for QEMU/KVM - Improvements from lnussel(a)suse.de - add %jobs macro again - package default qemu network and augeas config files again - don't start libvirtd by default (bnc#496838) - use --disable-static instead of just removing static libraries ==== ltrace ==== Version update (0.7.2 -> 0.7.91) - Update to git rev 6c6bcc3 * * Prototype libraries - Each DSO can now ship an ltrace config file (called prototype library) that ltrace will open when that DSO is loaded to process image. See ltrace(1) for details. - ltrace.conf is no longer part of installation tarball. Instead, we now ship libc.so.conf, libm.so.conf, libacl.so.conf, and syscalls.conf. Those are now istalled to /usr/share/ltrace by default. /etc/ltrace.conf and $HOME/.ltrace.conf are still loaded if present, and can contain arbitrary user configuration. - The option -F was retrofitted to be a colon-separated list of prototype libraries, and directories to look for prototype libraries in. On Linux, ltrace looks into XDG_CONFIG_HOME, XDG_CONFIG_DIRS, and /usr/share/ltrace as well. - Wide character strings are supported in prototypes. Use "string" lens as usual, but use array of integers as underlying type. libc.so.conf now contains prototypes of wide character functions. - Sole void function parameter such as in the following example, is now considered obsolete: | int fork(void); | This use is still accepted, taken to mean "hide(int)", but produces a warning, and will be removed in future. - Prototypes are now read from DWARF debug info, if available. This complements the data available in config files * * Architectural support - MIPS and MIPSel are now handled by the same backend. - ARMv6, ARMv7 and ARMv8 (AArch64) are supported, including full fetch backend. ARMv8 backend doesn't support tracing of 32-bit binaries, as currently there's no 32-bit userspace available for ARM64 processors. - Imagination Technologies Meta is now supported. - PowerPC64 ELFv2 little-endian ABI is now supported including full fetch backend. - On Linux, tracing of IFUNC symbols is supported. On i386, x86_64, ppc32 with secure PLT and ppc64, IRELATIVE PLT slots are traced as well. * * -w output now shows full library path The output format is similar to glibc's backtrace_symbols, e.g.: > /bin/ls(_init+0x19be) [0x40398e] > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f50cbc3676d] > /bin/ls(_init+0x25fd) [0x4045cd] - Enable for ppc64le and aarch64 ==== lxappearance ==== Subpackages: lxappearance-lang - applied spec-cleaner ==== fcitx-mozc ==== Version update (1.15.1785.102 -> 1.15.1868.102) Subpackages: mozc mozc-gui-tools - Upstream update to 1.15.1868.102 * Fix 'Set input mode to X' commands do not work during "Direct Input" mode - Upstream update to 1.15.1856.102 * Several internal changes and changes for other platforms - Upstream update to 1.15.1834.102 * Use Ninja for building - Upstream update to 1.15.1814.102 * Fix wring key mapping for Numpad-End in mozc.el * Fix dropping candidats unexpectedly * Fix preceding text is not correctly extracted by ibus-mozc * Fix undo-commit (MS IME keybind) is not functional in ibus-mozc - Update fcitx-mozc - Update gyp to r1957 ==== mtr ==== Version update (0.85 -> 0.85_p20140126) - cleaned up by spec-cleaner - xmtr moved from bin to sbin and use capabilities. Fixes bnc#878729 - version bump to 0.85_p20140126: * snapshot taken from Gentoo * this works with gtk properly - refreshed patches: * mtr-0.75-manxmtr.patch * mtr-0.82-capabilities.patch ==== kpartx ==== Subpackages: multipath-tools - Fixup segfault during uev_path_add() (bnc#892214) ==== libncurses5 ==== Subpackages: libncurses5-32bit libncurses6 libncurses6-32bit ncurses-devel ncurses-utils tack terminfo terminfo-base - Add ncurses patch 20140831 + modify test/demo_termcap.c and test/demo_terminfo.c to make their options more directly comparable, and add "-i" option to specify a terminal description filename to parse for names to lookup. ==== libp11-kit0 ==== Version update (0.20.2 -> 0.20.3) Subpackages: libp11-kit0-32bit p11-kit p11-kit-32bit p11-kit-devel p11-kit-tools - new version 0.20.3 * Fix problems reinitializing managed modules after fork * Fix bad bookeeping when fail initializing one of the modules * Fix case where module would be unloaded while in use [#74919] * Remove assertions when module used before initialized [#74919] * Fix handling of mmap failure and mapping empty files [#74773] * Stable p11_kit_be_quiet() and p11_kit_be_loud() functions * Require automake 1.12 or later * Build fixes for Windows [#76594 #74149] - apply patches to avoid errors from certificates with invalid public key (fdo#82328, bnc#890908, trust-Dont-use-invalid-public-keys-for-looking-up-.patch, trust-Print-label-of-certificate-when-complaining-.patch) ==== patchutils ==== Version update (0.3.2 -> 0.3.3) - Update to 0.3.3: * Context output format for "no newline" lines has been fixed. * The splitdiff utility now has an option to disable ".patch" filename extensions. * Some fixes for bugs spotted by Coverity. * Interdiff can now use "-" (stdin) for one of the inputs. - Run "make check" in %check section. ==== libpcre1 ==== Subpackages: libpcre1-32bit libpcre16-0 libpcrecpp0 libpcreposix0 pcre-devel pcre-doc pcre-tools - Harden build with full RELRO as this libraries end linked to at least one setuid root executable. ==== python-matplotlib ==== Version update (1.3.1 -> 1.4.0) Subpackages: python-matplotlib-tk - adjust python-tz buildrequires to match runtime requires (python-pytz) - Add new python-cairocffi dependency. This is the recommended dependency for the cairo backend upstream. - Split out the cairo backend into its own subpackage. It is no longer tied to gtk, so people can use it on its own without pulling in any gtk dependencies. - Fixed issues with qt. The qt5 backend is actually a generic qt backend, which the qt4 backend depends on. So it needs to be available for the qt4 backend to work at all. However, we need to pull in the python-qt5 package to make it work, and that package is only available for openSUSE > 13.1. So we need to split the generic qt stuff, including the qt5 stuff, into a package both the qt4 and qt5 backends can depend on, and then create a stub qt5 package that just pulls in python-qt5 - Reorganized some other backend packages based on backend changes - Update to 1.4.0 * New colormap for red-green color blind users * Documentation changes - Phil Elson rewrote of the documentation and userguide for both Legend and PathEffects. * New plotting features - Power-law normalization - Fully customizable boxplots - Support for datetime axes in 2d plots - Support for additional spectrum types - Support for detrending and windowing 2D arrays in mlab - Support for strides in mlab - Formatter for new-style formatting strings - Consistent grid sizes in streamplots - Get a list of all tick labels (major and minor) - Separate horizontal/vertical axes padding support in ImageGrid - Support for skewed transformations - Support for specifying properties of wedge and text in pie charts. - Fixed the direction of errorbar upper/lower limits - More consistent add-object API for Axes - Violin Plots - More `markevery` options to show only a subset of markers - Added size related functions to specialized `Collections` - Fixed the mouse coordinates giving the wrong theta value in Polar graph - Simple quiver plot for mplot3d toolkit - polar-plot r-tick locations * Date handling - n-d array support for date conversion * Configuration (rcParams) - 'savefig.transparent' added - 'axes.titleweight' - 'axes.formatter.useoffset' added * XDG compliance - Matplotlib now looks for configuration files (both rcparams and style) in XDG compliant locations. * 'style' package added - You can now easily switch between different styles using the new 'style' package * Backends - Qt5 backend added - Qt4 backend + Rudolf H�fler changed the appearance of the subplottool. + In the figure options dialog one can now choose to (re-)generate a simple automatic legend. + Interactive performance of the Qt4 backend has been dramatically improved under windows. + The mapping of key-signals from Qt to values matplotlib understands was greatly improved (For both Qt4 and Qt5). - Cairo backends + The Cairo backends are now able to use the cairocffi bindings, which are more actively maintained than the pycairo bindings. - Gtk3Agg backend + The Gtk3Agg backend now works on Python 3.x, if the cairocffi bindings are installed. - PDF backend + Added context manager for saving to multi-page PDFs. * Text - Text URLs supported by SVG backend - Anchored sizebar font * Sphinx extensions - The context directive in the plot_directive Sphinx extension can now accept an optional reset setting, which will cause the context to be reset. * Widgets - Span Selector * Added an option span_stays to SpanSelector which makes the selector rectangle stay on the axes after you release the mouse. * GAE integration - Matplotlib will now run on google app engine. - Added python-qt5 backend on openSUSE > 13.1 - Spec file cleanups ==== libqhull6-6_3_1_1494 ==== Subpackages: qhull qhull-devel - Change license to Qhull - it is now recognized by spdx.org ==== shim ==== - updated shim to new version (OpenSSL 0.9.8za) and requested a new certificate from Microsoft. Removed * shim-allow-fallback-use-system-loadimage.patch * shim-bnc872503-check-key-encoding.patch * shim-bnc877003-fetch-from-the-same-device.patch * shim-correct-user_insecure-usage.patch * shim-fallback-avoid-duplicate-bootorder.patch * shim-fallback-improve-entries-creation.patch * shim-fix-dhcpv4-path-generation.patch * shim-fix-uninitialized-variable.patch * shim-fix-verify-mok.patch * shim-get-variable-check.patch * shim-improve-error-messages.patch * shim-mokmanager-delete-bs-var-right.patch * shim-mokmanager-handle-keystroke-error.patch * shim-remove-unused-variables.patch since they're included in upstream and rebased the remaining onces. Added shim-signed-unsigned-compares.patch to fix some compiler warnings - Keep shim-devel.efi for the devel project - don't fail the build if the UEFI signing service signature can't be attached anymore. This way shim can still pass through staging projects. We will verify the correct signature for release builds using openQA instead. - shim-install: fix GRUB shows broken letters at boot by calling grub2-install to initialize /boot/grub2 directory with files needed by grub.cfg (bnc#889765) - Add shim-remove-unused-variables.patch to remove the unused variables - Add shim-bnc872503-check-key-encoding.patch to check the encoding of the keys (bnc#872503) - Add shim-bnc877003-fetch-from-the-same-device.patch to fetch the netboot image from the same device (bnc#877003) - Refresh shim-opensuse-cert-prompt.patch - Use --reinit instead of --refresh in %post to update the files in /boot - shim-install: fix boot partition and rollback support kluge (bnc#875385) - Replace shim-mokmanager-support-sha1.patch with shim-mokmanager-support-sha-family.patch to support the SHA family - Add shim-mokmanager-support-sha1.patch to support SHA1 hashes in MOK - snapper rollback support (fate#317062) - refresh shim-install - Insert the right signature (bnc#867974) - Add shim-fix-uninitialized-variable.patch to fix the use of uninitialzed variables in lib - Add shim-mokmanager-delete-bs-var-right.patch to delete the BS+NV variables the right way - Update shim-opensuse-cert-prompt.patch to delete openSUSE_Verify correctly - Add shim-fallback-avoid-duplicate-bootorder.patch to fix the duplicate entries in BootOrder - Add shim-allow-fallback-use-system-loadimage.patch to handle the shim protocol properly to keep only one protocol entity - Refresh shim-opensuse-cert-prompt.patch - shim-install: fix the $prefix to use grub2-mkrelpath for paths on btrfs subvolume (bnc#866690). - FATE#315002: Update shim-install to install shim.efi as the EFI default bootloader when none exists in \EFI\boot. - Update signature-sles.asc: shim signed by UEFI signing service, based on code from "Thu Feb 20 11:57:01 UTC 2014" - Add shim-opensuse-cert-prompt.patch to show the prompt to ask whether the user trusts the openSUSE certificate or not - allow package to carry multiple signatures - check correct certificate is embedded - always clean up generated files that embed certificates (shim_cert.h shim.cer shim.crt) to make sure next build loop rebuilds them properly - Add shim-bnc863205-mokmanager-fix-hash-delete.patch to fix the hash deletion operation to avoid ruining the whole list (bnc#863205) - Update shim-mokx-support.patch to support the resetting of MOK blacklist - Add shim-get-variable-check.patch to fix the variable checking in get_variable_attr - Add shim-fallback-improve-entries-creation.patch to improve the boot entry pathes and avoid generating the boot entries that are already there - Update SUSE certificate - Update attach_signature.sh, show_hash.sh, strip_signature.sh, extract_signature.sh and show_signatures.sh to remove the creation of the temporary nss database - Add shim-only-os-name.patch: remove the kernel version of the build server - Match the the prefix of the project name properly by escaping the percent sign. - enable signature assertion also in SUSE: hierarchy - Add shim-mokmanager-handle-keystroke-error.patch to handle the error status from ReadKeyStroke to avoid unexpected keys - Update to 0.7 - Add upstream patches: + shim-fix-verify-mok.patch + shim-improve-error-messages.patch + shim-correct-user_insecure-usage.patch + shim-fix-dhcpv4-path-generation.patch - Add shim-mokx-support.patch to support the MOK blacklist (Fate#316531) - Drop upstreamed patches + shim-fix-pointer-casting.patch + shim-merge-lf-loader-code.patch + shim-fix-simple-file-selector.patch + shim-mokmanager-support-crypt-hash-method.patch + shim-bnc804631-fix-broken-bootpath.patch + shim-bnc798043-no-doulbe-separators.patch + shim-bnc807760-change-pxe-2nd-loader-name.patch + shim-bnc808106-correct-certcount.patch + shim-mokmanager-ui-revamp.patch + shim-netboot-fixes.patch + shim-mokmanager-disable-gfx-console.patch - Drop shim-suse-build.patch: it's not necessary anymore - Drop shim-bnc841426-silence-shim-protocols.patch: shim is not verbose by default - Update microsoft.asc: shim signed by UEFI signing service, based on code from "Tue Oct 1 04:29:29 UTC 2013". - Add shim-netboot-fixes.patch to include upstream netboot fixes - Add shim-mokmanager-disable-gfx-console.patch to disable the graphics console to avoid system hang on some machines - Add shim-bnc841426-silence-shim-protocols.patch to silence the shim protocols (bnc#841426) - Create boot.csv in ESP for fallback.efi to restore the boot entry - Update microsoft.asc: shim signed by UEFI signing service, based on code from "Fri Sep 6 13:57:36 UTC 2013". - Improve extract_signature.sh to work on current path. - set timestamp of PE file to time of the binary the signature was made for. - make sure cert.o get's rebuilt for each target - Update microsoft.asc: shim signed by UEFI signing service, based on code from "Wed Aug 28 15:54:38 UTC 2013" - always build a shim that embeds the distro's certificate (e.g. shim-opensuse.efi). If the package is built in the devel project additionally shim-devel.efi is created. That allows us to either load grub2/kernel signed by the distro or signed by the devel project, depending on use case. Also shim-$distro.efi from the devel project can be used to request additional signatures. - also include old openSUSE 4096 bit certificate to be able to still boot kernels signed with that key. - add show_signatures script - replace the 4096 bit openSUSE UEFI CA certificate with new a standard compliant 2048 bit one. - fix shell syntax error - don't include binary in the sources. Instead package the raw signature and attach it during build (bnc#813448). - Update shim-mokmanager-ui-revamp.patch to include fixes for MokManager + reboot the system after clearing MOK password + fetch more info from X509 name + check the suffix of the key file - Update to 0.4 - Rebase patches + shim-suse-build.patch + shim-mokmanager-support-crypt-hash-method.patch + shim-bnc804631-fix-broken-bootpath.patch + shim-bnc798043-no-doulbe-separators.patch + shim-bnc807760-change-pxe-2nd-loader-name.patch + shim-bnc808106-correct-certcount.patch + shim-mokmanager-ui-revamp.patch - Add patches + shim-merge-lf-loader-code.patch: merge the Linux Foundation loader UI code + shim-fix-pointer-casting.patch: fix a casting issue and the size of an empty vendor cert + shim-fix-simple-file-selector.patch: fix the buffer allocation in the simple file selector - Remove upstreamed patches + shim-support-mok-delete.patch + shim-reboot-after-changes.patch + shim-clear-queued-key.patch + shim-local-key-sign-mokmanager.patch + shim-get-2nd-stage-loader.patch + shim-fix-loadoptions.patch - Remove unused patch: shim-mokmanager-new-pw-hash.patch and shim-keep-unsigned-mokmanager.patch - Install the vendor certificate to /etc/uefi/certs - Add shim-mokmanager-ui-revamp.patch to update the MokManager UI - Call update-bootloader in %post to update *.efi in \efi\opensuse (bnc#813079) - Add shim-bnc807760-change-pxe-2nd-loader-name.patch to change the PXE 2nd stage loader name (bnc#807760) - Add shim-bnc808106-correct-certcount.patch to correct the certificate count of the signature list (bnc#808106) - Add shim-bnc798043-no-doulbe-separators.patch to remove double seperators from the bootpath (bnc#798043#c4) - sign shim also with openSUSE certificate - identify project, export certificate as DER file - don't create an unused extra keypair - Add shim-bnc804631-fix-broken-bootpath.patch to fix the broken bootpath generated in generate_path(). (bnc#804631) - Update with shim signed by UEFI signing service, based on code from "Thu Feb 7 06:56:19 UTC 2013". - prepare for having a signed shim from the UEFI signing service - Sign shim-opensuse.efi and MokManager.efi with the openSUSE cert - Add shim-keep-unsigned-mokmanager.patch to keep the unsigned MokManager and sign it later. - Add shim-install utility - Add Recommends to grub2-efi - Add shim-mokmanager-support-crypt-hash-method.patch to support password hash from /etc/shadow (FATE#314506) - Embed openSUSE-UEFI-CA-Certificate.crt in shim - Rename shim-unsigned.efi to shim-opensuse.efi. - Update shim-mokmanager-new-pw-hash.patch to extend the password hash format - Rename shim.efi as shim-unsigned.efi - Merge patches for FATE#314506 + Add shim-support-mok-delete.patch to add support for deleting specific keys + Add shim-mokmanager-new-pw-hash.patch to support the new password hash. - Drop shim-correct-mok-size.patch which is included in shim-support-mok-delete.patch - Merge shim-remove-debug-code.patch and shim-local-sign-mokmanager.patch into shim-local-key-sign-mokmanager.patch - Install COPYRIGHT - Add shim-fix-loadoptions.patch to adopt the UEFI shell style LoadOptions (bnc#798043) - Drop shim-check-pk-kek.patch since upstream rejected the patch due to violation of SPEC. - Install EFI binaries to /usr/lib64/efi - Update shim-reboot-after-changes.patch to avoid rebooting the system after enrolling keys/hashes from the file system - Add shim-correct-mok-size.patch to correct the size of MOK - Add shim-clear-queued-key.patch to clear the queued key and show the menu properly - Remove shim-rpmlintrc, it wasn't fixing the error, hide error stdout to prevent post build check to get triggered by cast warnings in openSSL code - Add shim-remove-debug-code.patch: remove debug code - Add shim-rpmlintrc to filter 64bit portability errors - Add shim-local-sign-mokmanager.patch to create a local certicate to sign MokManager - Add shim-get-2nd-stage-loader.patch to get the second stage loader path from the load options - Add shim-check-pk-kek.patch to verify EFI images with PK and KEK - Add shim-reboot-after-changes.patch to reboot the system after enrolling or erasing keys - Install the EFI images to /usr/lib64/shim instead of the EFI partition - Update the mail address of the author - Add new package shim 0.2 (FATE#314484) + It's in fact git 2fd180a92 since there is no tag for 0.2 ==== splix ==== - splix-add-debuginfo.patch (from lpechacek(a)suse.cz) lets build make also the missing debuginfo packages (bnc#890843). ==== klogd ==== Subpackages: syslog-service - Klog service: Move the Alias tag from Unit section to the Install section bnc#893741 ==== libgudev-1_0-0 ==== Subpackages: libgudev-1_0-devel libudev-devel libudev1 libudev1-32bit systemd systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit typelib-1_0-GUdev-1_0 udev - udev: add option to generate old 'buggy' serials (bnc#886852) Add 1066-udev-add-compatibility-links-for-truncated-by-id-links.patch - Add upstream patch 0001-login-simplify-controller-handling.patch - Add upstream patches 0001-completion-filter-templates-from-restartable-units.patch 0002-systemd-fix-error-message.patch 0003-Quote-unit-names-in-suggested-systemctl-commandlines.patch 0004-config-parser-fix-mem-leak.patch 0005-login-fix-mem-leak.patch 1065-udev-bump-event-timeout-to-60-seconds.patch - Add upstream patch 0001-nspawn-fix-network-interface.patch to make option network-interface of systemd-nspawn work ==== traceroute ==== Version update (2.0.19 -> 2.0.20) - version 2.0.20 * Describe all complementary long options in the man page * Use correct service name for AS lookups * Avoid some rare case null dereference * Improve expiration check for simultaneous probes - traceroute-secure_getenv.patch use secure_getenv - traceroute-autotools.patch refresh ==== vsftpd ==== - force using fork() instead of clone() on s390 - fixes bnc#890469 * vsftpd-3.0.2-s390.patch ==== libwicked-0-6 ==== Version update (0.6.2 -> 0.6.3) Subpackages: wicked wicked-service - version 0.6.3 - client/nanny: lease handling/status fixes (partial bnc#891045), do not fail when slave/port is missing (bnc#889666,bnc#890275) - ifstatus: Do not check for config files (bnc#889666,bnc#890275) - dhcp4: advance secs field for dhcpd min-secs (bnc#889314), retransmit DHCP4 renewals enter reboot state with valid lease. - ifevent: increase netlink socket recv buffer size (bnc#884012) - ipv6: wait for addresses to become usable (bnc#882259) - fixed completed sit/gre/ipip tunnel support - dhcp6: initial defer handling and no-addr cleanup (bnc#891045) - dhcp: apply suse ifcfg dhcp options (bnc#866994) - ifup/reload: use default timeout if 0 (bnc#892486) ==== xf86-video-ast ==== Version update (0.99.9 -> 1.0.1) - Update to Version 1.0.1: This update essentially contains: * my fixes (which get obsoleted): u_01-Fix-compiler-warnings-get-rid-if-xf86PciInfo-h.patch u_02-Fix-compiler-warnings-get-rid-of-deprecated-IOADDRESS.patch u_03-Fix-compiler-warnings-add-DrawablePtr-argument-to-ASTPutImage.patch u_04-Clean-up-namespace-in-ast_vgatools.c.patch u_05-Clean-up-namespace-in-ast_2dtool.c.patch u_06-Clean-up-namespace-in-ast_cursor.c.patch u_07-Clean-up-namespace-in-ast_mode.c.patch u_08-Clean-up-namespace-in-ast_accel.c.patch u_09-Clean-up-namespace-in-ast_tool.c.patch u_10-Include-local-headers-only-when-needed.patch u_11-Fix-typo.patch u_12-Fix-ABI-version-conflict-in-xf86UnclaimPciSlot.patch u_13-Move-firmware-for-DP501-to-a-separate-file.patch u_14-Add-_AST_H_-define-to-ast.h.patch * Fix for bnc#892723: Fixed-1600x900-cannot-display-properly.patch * An update for DP501 support ==== xinetd ==== - Update license tag to use SPDX 1.2. ==== yast2 ==== Version update (3.1.102 -> 3.1.103) Subpackages: yast2-devel-doc - fix using changed root in netd agent so it can be used in installation (bnc#893965) - 3.1.103 ==== yast2-add-on ==== Version update (3.1.8 -> 3.1.9) - make add-ons dialog consistent when going back (bnc#893103) - 3.1.9 ==== yast2-inetd ==== Version update (3.1.6 -> 3.1.7) - allow tested code to know it is being tested (bnc#893965) - 3.1.7 ==== yast2-ntp-client ==== Version update (3.1.10 -> 3.1.12) - Using Report.Error to be autoyast-proof - Fixed variable replacement int gettext string; - Added linebreaks in too long popup content (bnc#894573) - 3.1.12 - Aligned "Synchronize now" button and "NTP Server Address" box (bnc#893065) - Fixed checking of return value of "sntp -s" (bnc#893094) - 3.1.11 ==== yast2-packager ==== Version update (3.1.42 -> 3.1.44) - Use DM device for encrypted partitions during test mount (bnc#889334) - 3.1.44 - Use options from partitioner during test mount (bnc#873180) - 3.1.43 Removed packages: libicu53_1-data yast2-theme-openSUSE Added packages: ghc-array > ghc-base > ghc-binary > ghc-bytestring > ghc-containers > ghc-deepseq > ghc-directory > ghc-filepath > ghc-old-locale > ghc-old-time > ghc-pretty > ghc-process > ghc-template-haskell > ghc-time > ghc-unix ghc-HTTP ghc-aeson ghc-attoparsec ghc-base-unicode-symbols ghc-base64-bytestring ghc-blaze-builder ghc-blaze-html ghc-blaze-markup ghc-conduit ghc-data-default ghc-digest ghc-dlist ghc-extensible-exceptions ghc-hashable ghc-hslua ghc-lifted-base ghc-mmorph ghc-monad-control ghc-mtl ghc-nats ghc-network ghc-pandoc-types ghc-parsec ghc-pcre-light ghc-primitive ghc-random ghc-resourcet ghc-semigroups ghc-syb ghc-tagsoup ghc-temporary ghc-text ghc-transformers ghc-transformers-base ghc-unordered-containers ghc-vector ghc-void ghc-xml ghc-yaml ghc-zip-archive ghc-zlib gstreamer-plugins-qt ghc-highlighting-kate libicu53_1-ledata kdevelop4 > kdevelop4-devel > kdevelop4-lang kdevelop4-plugins-php ghc-pandoc > pandoc ghc-texmath yast2-branding-openSUSE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

14 24

[opensuse-factory] wxpython 3.0
by Dmitry Roshchin 12 Sep '14

12 Sep '14

Currently we have wxpython 2.8 and 2.9 in Factory. Are there plans to add wxpython 3.0? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Re: [opensuse-packaging] Failing build of python-moin on SLE_11_SP3
by denisart benjamin2 10 Sep '14

10 Sep '14

Le 10/09/2014 21:40, Andrew Daugherity a écrit : > I would not consider myself a "python packaging expert", but I've done a bit of it for our internal repo. > > According to https://en.opensuse.org/openSUSE:Packaging_Python#File_lists > there are two macros: > """ > • %python_sitelib expands to /usr/lib/pythonX.Y/site-packages. This is the install location for platform-independent modules. > • %python_sitearch expands to %{_libdir}/pythonX.Y/site-packages, that is, either /usr/lib or /usr/lib64, depending on your architecture. This is the install location for platform-dependent modules. > """ > > Since the build log is complaining about a noarch package installing stuff under /usr/lib64, I see two options: > * use %python_sitelib, not %python_sitearch > * make the package not be noarch > > > I think you may have to use the latter solution for SLES 11 -- looking at /usr/lib/rpm/macros, both s11sp3 and opensuse 12.3 define them like this: > %python_sitelib %(%{__python} -c "from distutils.sysconfig import get_python_lib; import sys; sys.stdout.write(get_python_lib())") > %python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; import sys; sys.stdout.write(get_python_lib(1))") > > However on SLES 11, both of them return /usr/lib64/python2.6/site-packages. Looking at the source (/usr/lib64/python2.X/site-packages/distutils/sysconfig.py, part of python-base), there's different logic in the opensuse one to return 'lib' for certain cases and sys.lib (i.e. 'lib' on i586, 'lib64' on x86_64) in others, which simply isn't present in the SLES version. > > > > TL;DR: It appears you need to wrap your noarch setting inside a %suse_version check that excludes SLES 11. > > > -Andrew > Quickly, as a d:l:p maintainer, if you meet one day this kind of issue, use this little hack %if 0%{?suse_version} && 0%{?suse_version} <= 1110 %{!?python_sitelib: %global python_sitelib %(python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()")} %else BuildArch: noarch %endif Olav, I fixed your package -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Re: [opensuse-packaging] Failing build of python-moin on SLE_11_SP3
by denisart benjamin2 10 Sep '14

10 Sep '14

Le 10/09/2014 20:30, Olav Reinert a écrit : > I'm the maintainer of the python-moin package: > > <https://build.opensuse.org/package/show/devel:languages:python/python-moin> > > The build succeeds on all platforms for which the package is enabled, except > on SLE_11_SP3, where it succeeds for i586 but fails for x86_64. > > To me it appears to be a problem with the python build infrastructure, because > on that particular platform and architecture, python files end up in the wrong > place. But I may well be wrong - perhaps a python packaging expert can take a > look and figure out what's going on? > > Regards, > Olav A Python package builded for SLE_11 cannot be noarch. It's just missed a little hack to fix build. Regards. Benjamin -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Dovecot packaging rework
by Marcus Rueckert 10 Sep '14

10 Sep '14

hi, when we tried to submit dovecot 2.2 to factory, we got asked why we want the packaging of multiple versions. The main points are - allow easier parallel maintenance especially for long term distros (Evergreen + SLES) - one those distros allow admins to time the upgrade more easily because they have both packages avaible. - allow parallel maintenance of plugins for multiple versions in 1 project. Those goals come at a price. Our problems so far have been. - no unversioned dovecot package for easier installation. - when upgrading from dovecot 2.1 to dovecot 2.2 it would uninstall all old config files without changes, rename your edited config files to .rpmsave. after the upgrade you had a clean server again and had to merge the configs manually. While you could argue that this isnt too bad and makes sure the config stays update with the latest format. Dovecot is actually pretty forgiving in parsing old configs. So this is unneeded and can cause trouble. The solution -------------- 1. created an unversioned dovecot package again 2. that package will own all files that are shared between different dovecotXY packages. pam config, firewall config, init script, systemd unit files. 3. this package will pull a dovecot implementation via requires, with a recommends on the version that we ship in the respective release. 4. this package will also "own" the files in /etc/dovecot. This ensures that the config survives version upgrades. 5. If there is no existing configuration found, it will copy the example config for the version that is installed with it. While working on this issue, we also fixed a bug in the package upgrade process. [1] If there are no objections, I would like to submit those packages to server:mail and then factory soon. with kind regards darix [1] https://bugzilla.redhat.com/show_bug.cgi?id=134325 -- openSUSE - SUSE Linux is my linux openSUSE is good for you www.opensuse.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] systemd in initrd and encrypted filesystems
by Bjoern Voigt 09 Sep '14

09 Sep '14

Does openSUSE already use Systemd in Initrd and if not, is this planned? I think, using Systemd in initrd would allow to use some interesting Systemd features in early boot phase. Especially the systemd-cryptsetup(8) functionality would be interesting. Opening an encrypted root filesystem and additional encrypted filesystems with Systemd in Initrd could be better than using the old /lib/mkinitrd/scripts/ scripts. The /lib/mkinitrd/scripts/ scripts have some problems with password input (no splash screen support in openSUSE 13.1; only English keyboard; only support for LVM for encrypted root filesystems etc.). Björn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 16

[opensuse-factory] Build failures for vtk and paraview in factory
by Atri Bhattacharya 08 Sep '14

08 Sep '14

Hi! Since the update of Mesa to 10.3RC1 [1] in Factory, vtk and paraview packages which I maintain have been failing to build (note that they do build fine with Mesa 10.2.x in openSUSE:13.2) with the following kind of errors (identical failures for both vtk and paraview): ----------------------------------------- [ 5807s] In file included from /usr/include/GL/glx.h:333:0, [ 5807s] from /home/abuild/rpmbuild/BUILD/ParaView-v4.2.0-RC1-source/VTK/Rendering/OpenGL/vtkXOpenGLRenderWindow.cxx:30: [ 5807s] /usr/include/GL/glxext.h:480:143: error: 'GLintptr' has not been declared [ 5807s] typedef void ( *PFNGLXCOPYBUFFERSUBDATANVPROC) (Display *dpy, GLXContext readCtx, GLXContext writeCtx, GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); [ 5807s] ^ [ 5807s] /usr/include/GL/glxext.h:480:164: error: 'GLintptr' has not been declared [ 5807s] typedef void ( *PFNGLXCOPYBUFFERSUBDATANVPROC) (Display *dpy, GLXContext readCtx, GLXContext writeCtx, GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); [ 5807s] ^ [ 5807s] /usr/include/GL/glxext.h:480:186: error: 'GLsizeiptr' has not been declared [ 5807s] typedef void ( *PFNGLXCOPYBUFFERSUBDATANVPROC) (Display *dpy, GLXContext readCtx, GLXContext writeCtx, GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); [ 5807s] ^ [ 5807s] /usr/include/GL/glxext.h:481:148: error: 'GLintptr' has not been declared [ 5807s] typedef void ( *PFNGLXNAMEDCOPYBUFFERSUBDATANVPROC) (Display *dpy, GLXContext readCtx, GLXContext writeCtx, GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); [ 5807s] ^ [ 5807s] /usr/include/GL/glxext.h:481:169: error: 'GLintptr' has not been declared [ 5807s] typedef void ( *PFNGLXNAMEDCOPYBUFFERSUBDATANVPROC) (Display *dpy, GLXContext readCtx, GLXContext writeCtx, GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); [ 5807s] ^ [ 5807s] /usr/include/GL/glxext.h:481:191: error: 'GLsizeiptr' has not been declared [ 5807s] typedef void ( *PFNGLXNAMEDCOPYBUFFERSUBDATANVPROC) (Display *dpy, GLXContext readCtx, GLXContext writeCtx, GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); ----------------------------------------- It seems to me that somehow this segment in /usr/include/GL/glext.h (starting at line 465 in 10.3RC1): ------------------------------ #ifndef GL_VERSION_1_5 #define GL_VERSION_1_5 1 #include <stddef.h> typedef ptrdiff_t GLsizeiptr; typedef ptrdiff_t GLintptr; ------------------------------ no longer has an effect, while the same segment worked with as late as Mesa 10.2.x. I would be much grateful to learn if this is intended as part of the upgrade of Mesa to 10.3, and if so what would be the recommended workaround. If not, am I doing something wrong? Thanks for any suggestions toward fixing this. [1] https://build.opensuse.org/request/show/246335 -- Atri Bhattacharya <badshah400(a)aim.com> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Should a new forum be created for Factory on forums.opensuse.org
by Roman Bysh 07 Sep '14

07 Sep '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everybody, Now that Factory has been broadcasted on the Internet that it's a rolling release. Does anyone think that a new forum be added on forums.opensuse.org for Factory? That is after openSUSE 13.2 is released in November. Cheers! Roman - -------------------------------------------- openSUSE -- Get it! Discover it! Share it! - -------------------------------------------- http://linuxcounter.net/ #179293 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAEBAgAGBQJUC60xAAoJEISyH9AowGDQrgsH/3TZXSu8nacQVsUGIpHJMaMC 8iQcGztNlFmuX7A1Sbn2ZT+/BXm7kvs+QMYsNdcNZAGOCi7IWlhTqNvAOpbUBH9a bW9CEQwhijhlGhst5fb2lC5wt2R1jXqQ18a1o2Uheg121TJWOJUpJvnti/63fed8 7des/Q+y7v0lkE/1/ipjXmyB1geqHi6wylmAq6su6UnhxxnSnZU5er9Fl1W08aKC td7k53rQteJj5VZL19f+EoBwmcywUFoiPUdfR8EwaVTq1pnN+WqSM2p4X7KsuIgO ruRTwyXVogKO56a028HgBJssZQfRsHRZPv/CoSUEp0+oBkxo4tBfdcBHA70H3Zw= =gpbt -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] The etckeeper-1.13 is in the official repository of openSUSE Factory.
by 1xx 06 Sep '14

06 Sep '14

Hi Joey. We tried that the etckeeper-1.13 is packaged in openSUSE Factory's official repository. And now, the etckeeper-1.13 is packaged in openSUSE Factory's official repository. http://software.opensuse.org/package/etckeeper https://build.opensuse.org/package/show?project=openSUSE%3AFactory&package=… I sent you a pullrequest about AVOID_PACKAGELIST. https://github.com/joeyh/etckeeper/pull/17 But you do not merge it yet. So I wrote a patch for openSUSE. https://build.opensuse.org/package/view_file/utilities/etckeeper/etckeeper-… The etckeeper-1.13+AVOID_PACKAGELIST will be in the official repository of openSUSE 13.2 on 2014-Nov. http://lists.opensuse.org/opensuse-packaging/2014-08/msg00013.html Thank you! By the way, you released etckeeper-1.14 yesterday. Because I am not in time for 2014-Sep.-15, I do not intend to release etckeeper-1.14. http://lists.opensuse.org/opensuse-packaging/2014-08/msg00013.html Sorry. -- 1xx <ItSANgo(a)gmail.com> <https://twitter.com/ItSANgo> Mitsutoshi NAKANO <bkbin005(a)rinku.zaq.ne.jp> <http://d.hatena.ne.jp/Itisango/> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Please review and help with tests about etckeeper (was: submitrequest about etckeeper)
by 1xx 06 Sep '14

06 Sep '14

2014-07-22 5:35 GMT+09:00 1xx <itsango(a)gmail.com>: > > Already I sent some pullrequests to upstream. > https://github.com/joeyh/etckeeper/pull/12 (decline) > https://github.com/joeyh/etckeeper/pull/14 (merged) > https://github.com/joeyh/etckeeper/pull/15 (merged) > https://github.com/joeyh/etckeeper/pull/16 (merged) > https://github.com/joeyh/etckeeper/pull/17 (pending) > https://github.com/joeyh/etckeeper/pull/18 (pending) The upstream (Mr. Joey Hess) released etckeeper 1.13. http://joeyh.name/code/etckeeper/ So I rebuild etckeeper 1.13. https://build.opensuse.org/package/show/home:Mitsutoshi:branches:utilities/… And I added patch of https://github.com/joeyh/etckeeper/pull/17 (pending). When ZYpp install or remove, etckeeper makes all package list as rpm -qa twice for getting changed packages list in ZYpp plugin. eg) before install: rpm -qa | sort >before_packagelist after install: rpm -qa | sort >after_packagelist diff -u before_packagelist after_packagelist >changed_packageslist But these "rpm -qa" are slowly. (sometimes over 30 sec.) Over 30 sec., ZYpp plugin gets timeout, so sometimes etckeeper's autocommits fail. (If I do not know the implementation, I will write a bug report). So I wrote a patch of gh#joeyh/etckeeper#17. This patch provide a choice of whether or not make "changed packages list" I already built it. Now I am testing it. https://docs.google.com/spreadsheets/d/1kmtjqvCnqNMmuFHRLh0-xh1iBdjhxnvKoYg… Please review it and help with tests. -- 1xx <ItSANgo(a)gmail.com> <https://twitter.com/ItSANgo> Mitsutoshi NAKANO <bkbin005(a)rinku.zaq.ne.jp> <http://d.hatena.ne.jp/Itisango/> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 6

[opensuse-factory] TW: system freeze-up while using rsync for backup to external usb HD
by ellanios82 05 Sep '14

05 Sep '14

Hello List, T'Weed - in case of interest, have experienced 3 times system freeze : kernel : kernel-desktop-3.16.1-46.1.g90bc0f1.x86_64 rsync : rsync-3.1.0-21.8.1.x86_64 .............. rsync script: ........... #!/bin/sh # # use rsync to backup WHOLE system / to /dev/sdc4 # mount -t ext4 /dev/sdc4 /mnt_cron cd rsync -av --delete-after --exclude=/dev/shm --exclude='*/Cache/*' --exclude=/DVD --exclude=/media --exclude=/mnt --exclude=/mnt_cron --exclude=/proc --exclude=/run --exclude=/sys --exclude=/tmp --exclude=/var/lib/ntp --exclude=/var/run --exclude=/var/tmp / /mnt_cron df umount /mnt_cron ................. regards ellan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Factory snapshot 20140901 released!
by Ludwig Nussel 05 Sep '14

05 Sep '14

Changed packages: ==== ImageMagick ==== Subpackages: ImageMagick-devel ImageMagick-doc ImageMagick-extra libMagick++-6_Q16-5 libMagickCore-6_Q16-2 libMagickWand-6_Q16-2 perl-PerlMagick - fix license for spdx 1.2 ==== Mesa ==== Version update (10.2.5 -> 10.3.0) Subpackages: Mesa-32bit Mesa-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv1_CM-devel Mesa-libGLESv1_CM1 Mesa-libGLESv2-2 Mesa-libGLESv2-devel Mesa-libglapi-devel Mesa-libglapi0 Mesa-libglapi0-32bit libOSMesa-devel libOSMesa9 libOSMesa9-32bit libgbm-devel libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r600 libvdpau_radeonsi libwayland-egl-devel libwayland-egl1 libxatracker2 - Update to version 10.3.0-RC1 * Mesa 10.3 brings many performance improvements, more OpenGL 4.x functionality, the VC4 Gallium3D driver, and much more. * supersedes U_mesa-glx-Reduce-error-log-level.patch - Package vdpau_r600 for ppc64le as well (bnc#893275) - u_Suppress-any-libGL-.-warnings-when-LIBGL_DEBUG-is-se.patch Suppress any "libGL:..." warnings when LIBGL_DEBUG == "quiet" (bnc#892896) ==== curl ==== Version update (7.37.0 -> 7.37.1) Subpackages: libcurl-devel libcurl4 - curl 7.37.1: This release includes many bugfixes and the following changes: * bits.close: introduce connection close tracking * darwinssl: Add support for --cacert * polarssl: add ALPN support * docs: Added new option man pages ==== dnsmasq ==== - enable DNSSEC - require libnettle - package trust-anchors.conf - spec fixes: - define HAVE_ flags on commandline, otherwise 'dnsmasq --version' will not correctly reflect the feature status - actually build with relro and pie. (bnc#893057) ==== gstreamer ==== Version update (1.4.0 -> 1.4.1) Subpackages: gstreamer-devel gstreamer-utils libgstreamer-1_0-0 typelib-1_0-Gst-1_0 - Update to version 1.4.1: + Bugs fixed: bgo#732851, bgo#733805, bgo#733974, bgo#734688, bgo#734773. + Updated translations. ==== gstreamer-plugins-bad ==== Version update (1.4.0 -> 1.4.1) Subpackages: libgstbadbase-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstgl-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 - Update to version 1.4.1: + Bugs fixed: bgo#678485, bgo#725871, bgo#730509, bgo#731824, bgo#733245, bgo#733426, bgo#733487, bgo#733490, bgo#733545, bgo#733726, bgo#733837, bgo#734014, bgo#734015, bgo#734269, bgo#734394, bgo#734517, bgo#734519, bgo#734520, bgo#734521, bgo#734522, bgo#734524, bgo#734528, bgo#734531, bgo#734533, bgo#734534, bgo#734536, bgo#734537, bgo#734539, bgo#734544, bgo#734763, bgo#734830, bgo#735078. + Updated translations. ==== gstreamer-plugins-base ==== Version update (1.4.0 -> 1.4.1) Subpackages: gstreamer-plugins-base-devel libgstallocators-1_0-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstfft-1_0-0 libgstpbutils-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgstvideo-1_0-0 typelib-1_0-GstAllocators-1_0 typelib-1_0-GstApp-1_0 typelib-1_0-GstAudio-1_0 typelib-1_0-GstFft-1_0 typelib-1_0-GstPbutils-1_0 typelib-1_0-GstRiff-1_0 typelib-1_0-GstRtp-1_0 typelib-1_0-GstRtsp-1_0 typelib-1_0-GstSdp-1_0 typelib-1_0-GstTag-1_0 typelib-1_0-GstVideo-1_0 - Update to version 1.4.1: + Bugs fixed: bgo#733916 bgo#733976, bgo#734683, bgo#734822. + Updated translations. ==== gstreamer-plugins-good ==== Version update (1.4.0 -> 1.4.1) Subpackages: gstreamer-plugins-good-extra - Update to version 1.4.1: + Bugs fixed: bgo#727180, bgo#733695, bgo#733866, bgo#734435, bgo#734473, bgo#734474, bgo#734475, bgo#734476, bgo#734478, bgo#734764. + Updated translations. ==== gstreamer-plugins-ugly ==== Version update (1.4.0 -> 1.4.1) - Update to version 1.4.1: + x264: Fix colour inversion with YV12 format. It's the same as I420 but with the U/V planes swapped. ==== java-1_7_0-openjdk ==== Subpackages: java-1_7_0-openjdk-devel java-1_7_0-openjdk-headless - build a bootstrap version when bootstrap conditional set and buildrequire this in the version when bootstrap conditional is not set To make this work, we need in every prj with jdk a _link in jdk-bootstrap with this content: <link package="java-1_7_0-openjdk" cicount="copy"> <patches> <topadd>%global _with_bootstrap 1</topadd> </patches> </link> This makes sure the build dependencies of jdk are clear and you don't need tricks (other than the _link) ==== kdevplatform ==== Version update (1.6.0 -> 1.7.0) Subpackages: kdevplatform-lang libkdevplatform-devel - Update to 1.7.0 * No upstream changelog provided * Last feature release based on kdelibs4 and Qt4 - Bump kdevelop_version to 4.7.0 - Bump libkdev_major to 8 - Use kde4 macros for includes, kdevplatform respects kdelibs4 includes ==== libcacard0 ==== Version update (2.0.93 -> 2.1.0) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 * Patches added: 0039-linux-user-Cast-validity-checks-on-.patch 0040-linux-user-Convert-blkpg-to-use-a-s.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 - Sort BuildRequires alphabetically to avoid changing back and forth - Sync'ed deletion of .a and .la to libcacard.spec.in - Revert use of %{version} in Source line as it breaks update_git.sh - update to v2.1.0: http://wiki.qemu-project.org/ChangeLog/2.1 - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 * Patches dropped: 0039-fix-full-frame-updates-for-VNC-clie.patch 0040-vnc-update-fix.patch ==== libtheora-devel ==== Subpackages: libtheora0 - Split libtheoradec/enc from libtheora0 as they have different SO numbers - Trim huge description; improve on RPM group classificaiton ==== libnetpbm-devel ==== Subpackages: libnetpbm11 netpbm - fix license for spdx 1.2 (IJG is now part of it, loosing SUSE prefix) ==== qdox ==== - rename the conditional to junit_test and switch the default, bootstrapping factory is more important than a single test ==== qemu ==== Version update (2.0.93 -> 2.1.0) Subpackages: qemu-arm qemu-block-curl qemu-extra qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-ppc qemu-s390 qemu-seabios qemu-sgabios qemu-tools qemu-vgabios qemu-x86 - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 * Patches added: 0039-linux-user-Cast-validity-checks-on-.patch 0040-linux-user-Convert-blkpg-to-use-a-s.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 - Revert use of %{version} in Source line as it breaks update_git.sh - build libcaca from a different spec file to avoid cycles with spice - update to v2.1.0: http://wiki.qemu-project.org/ChangeLog/2.1 - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 * Patches dropped: 0039-fix-full-frame-updates-for-VNC-clie.patch 0040-vnc-update-fix.patch ==== qemu-linux-user ==== Version update (2.0.93 -> 2.1.0) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 * Patches added: 0039-linux-user-Cast-validity-checks-on-.patch 0040-linux-user-Convert-blkpg-to-use-a-s.patch - Implement missing ioctl to fix parted properly - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 - Revert use of %{version} in Source line as it breaks update_git.sh - update to v2.1.0: http://wiki.qemu-project.org/ChangeLog/2.1 - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.1 * Patches dropped: 0039-fix-full-frame-updates-for-VNC-clie.patch 0040-vnc-update-fix.patch ==== rsyslog ==== - Stop syslog.socket in %preun to avoid the daemon we uninstall gets started by a log message due to dependencies (bnc#840815). ==== slf4j ==== - build against log4j-mini to avoid a cycle ==== gvim ==== Version update (7.4.373 -> 7.4.417.hg.6162) Subpackages: vim vim-data - fix license for spdx 1.2 - Use a disabled _service file - Remove the un-needed Perl hack in the spec file - Use mercurial tags instead of applying patches one by one. This reduces unexpected failures. - Updated to revision 417, fixes the following problems * Can't build with Perl on Fedora 20. * Fold does not open after search when there is a CmdwinLeave autocommand. * "foo bar" sorts before "foo" with sort(). (John Little) * Cannot define a command only when it's used. * Cannot build. Warning for shadowed variable. (John Little) * Problem with breakindent/showbreak and tabs. * After splitting a window and setting 'breakindent' the default minimum with is not respected. * Screen updating is slow when using matches. * Inserting text for Visual block mode, with cursor movement, repeats the wrong text. (Aleksandar Ivanov) * Visual block insert breaks a multi-byte character. * Compiler warning for unused argument and unused variable. * Character after "fb" command not mapped if it might be a composing character. * Test 63 fails when run with GUI-only Vim. * Popup menu flickers too much. * When 'equalalways' is set a split may report "no room" even though there is plenty of room. * Title of quickfist list is not kept for setqflist(list, 'r'). * Accessing freed memory after using setqflist(list, 'r'). (Lcd) * Loading python may cause Vim to exit. * Get u_undo error when backspacing in Insert mode deletes more than one line break. (Ayberk Ozgur) * Mapping characters may not work after typing Esc in Insert mode. * Bad interaction between preview window and omnifunc. * Test 102 fails when compiled with small features. * When building with tiny or small features building the .mo files fails. * When splitting a window the changelist position is wrong. * "4gro" replaces one character then executes "ooo". (Urtica Dioica) * With 'linebreak' set and 'list' unset a Tab is not counted properly. (Kent Sibilev) * Still sometimes Vim enters Replace mode when starting up. * Advancing pointer over end of a string. * No 'cursorline' highlighting when the cursor is on a line with diff highlighting. (Benjamin Fritz) * Not easy to detect type of command line window. * C indent is wrong below an if with wrapped condition followed by curly braces. (Trevor Powell) * When 'clipboard' is "unnamed", :g/pat/d is very slow. (Praful) * Matchparen only uses the topmost syntax item. * Encryption implementation is messy. Blowfish encryption has a weakness. * Test 72 crashes under certain conditions. (Kazunobu Kuriyama) * Valgrind reports errors when running test 72. (Dominique Pelle) ==== xf86-video-intel ==== - u_Erase-cursor-image-when-changing-rotation.patch - > U_Erase-cursor-image-when-changing-rotation.patch - u_Erase-cursor-image-when-changing-rotation.patch Erase cursor image when changing rotation: The rotated cursor image will be at a different location in the 64x64 bit block and won't overlap with the unrotated image. Therefore it will not be overwritten if the real image is smaller (bnc#893752). - u_sna_dri3_mesa_relies_upon_implicit_fences.patch - > U_sna_dri3_mesa_relies_upon_implicit_fences.patch Patches from upstream should be flagged with 'U'. ==== xf86-video-nouveau ==== - Don't install .la file. ==== xf86-video-qxl ==== - n_disable-surfaces-on-kms.patch Disable the broken offscreen surfaces on KMS (bnc#894022) - Build Xspice X server and driver (on openSUSE 12.3 and later), ship them a separate subpackage. ==== xmlbeans ==== - provide xmlbeans in xmlbeans-mini so it's a valid choice during bootstrap ==== xscreensaver ==== Subpackages: xscreensaver-data xscreensaver-data-extra - add xscreensaver-disable-upgrade-nagging-message.patch in order to disable nagging messages about upgrading to a newer version (bnc#890595) ==== yast2-samba-client ==== Version update (3.1.9 -> 3.1.12) - Support non-default ctdbd socket paths; (bnc#893154). - 3.1.12 - Support separately defined Samba resources; don't manipulate the ctdb_manages_winbind parameter during join; (bnc#892982). - 3.1.11 - Fix CTDB resource primitive path regular expression; (bnc#892975). - 3.1.10 Removed packages: kdevelop4 > kdevelop4-devel > kdevelop4-lang kdevelop4-plugins-php libkdevplatform7 Added packages: libkdevplatform8 libtheoradec1 > libtheoraenc1 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] new package cronic for Factory
by Olav Reinert 05 Sep '14

05 Sep '14

Hi, Cronic is a small shim shell script for wrapping cron jobs so that cron only sends email when an error has occurred. Cronic defines an error as any non- trace error output or a non-zero result code. Cronic filters Bash execution traces (or anything matching PS4) from the error output, so jobs can be run with execution tracing to aid forensic debugging. Cronic has no options, it simply executes its arguments. I've packaged this little utility script for general use and propose to add it to Factory. I do not expect any future versions to be made of the script, so I expect next to no maintenance effort. Olav -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] What happened to smb-krb-printing?
by Robert Munteanu 04 Sep '14

04 Sep '14

Hi, Just realized that I no longer have smb-krb-printing installed, last I used it was on 12.3 . Looking at [1], I see that while 12.3 is OK, 13.1 only has it in a home repo, while Factory only has it as an old 32-bit package. Is this intentional? Is there an alternative? Thanks, Robert [1]: http://software.opensuse.org/package/samba-krb-printing -- http://robert.muntea.nu/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] Is this for real?
by Basil Chupin 03 Sep '14

03 Sep '14

I am just in the process of updating Factory/13.2 using 'zypper up' and it is downloading version KDE 4.11.x ! The installed version of KDE for 13.2 is 4.14.0 . Is this downgrading correct or has something gone wrong in the repos? I have stopped the downloads by 'zypper up' in the meantime. BC -- Using openSUSE 13.1, KDE 4.14.0 & kernel 3.16.1-7 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX660 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 12

[opensuse-factory] Whither logger
by Archie Cobbs 03 Sep '14

03 Sep '14

Anybody know where logger(1) went? https://build.opensuse.org/package/live_build_log/openSUSE%3AFactory/twilio… Thanks, -Archie -- Archie L. Cobbs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 16

[opensuse-factory] W-Fi in 13.2 (ie Factory)
by Basil Chupin 03 Sep '14

03 Sep '14

I have counted up to 10 several times and now feel I am more or less composed enough to post this message concerning on how to set-up wi-fi in 13.2. How the h*** is it done?! For 13.1 I looked at the YouTube video on how to do this and had it working within 30 seconds. But in 13.2 I have now wasted an hour or so trying to figure out the mess which is 'networking'. And what the h*** is "wicked"?! Is there some documentation on how to get wi-fi working in 13.2, please, or at least a hint on what to do to get my laptop's wi-fi configured? BC -- Using openSUSE 13.1, KDE 4.13.3 & kernel 3.16.1-4 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX660 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 17

[opensuse-factory] Booting factory-tested LiveCD on UEFI secureboot system
by Atri Bhattacharya 03 Sep '14

03 Sep '14

Hi! While trying to boot openSUSE-Factory-GNOME-Live-x86_64-Snapshot20140829-Media.iso from a Live USB disk on my UEFI secureboot enabled laptop, I get the following error (I am paraphrasing here): >> The current device is blocked by system security policy, following which my system simply proceeds to boot the installed system rather than the Live USB. If I try the exact same routine with a 13.1 Live USB instead, it boots into the Live system all fine. Is there something I am not doing right, or is there some issue with factory booting on UEFI secureboot systems? Thanks for any help. -- Atri Bhattacharya <badshah400(a)aim.com> -- Atri Bhattacharya Dept. of Physics University of Arizona Phone: (520) 621 2453 Tue Sep 2 18:54:22 MST 2014 Sent from openSUSE 13.1 on my laptop. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] mcelog on 32bit machines
by vetter＠physik.uni-wuerzburg.de 03 Sep '14

03 Sep '14

Hi, maybe a dumb question, but: Why do we build mcelog only for x86_64? i586 is excluded in OBS http://www.mcelog.org/README.html states, it should run also on 32bit machines. BTW, I have a 32bit-machine that logs MCE in /var/log/messages. -- Mit freundlichen Gruessen, Andreas Vetter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] Status: Distribution
by Stephan Kulow 02 Sep '14

02 Sep '14

Hi, There are many things in need of fixing in case you look for something where you can help: LXDE still broken display manager: https://openqa.opensuse.org/tests/20580/modules/first_boot/steps/1 I suggest we take down LXDE from DVD. Issues with it are seldomly fixed in timely manner ;( Upgrade path broken: https://openqa.opensuse.org/tests/20589/modules/upgrade_select/steps/1 I remember it was tracked in bugzilla somewhere, but I lost the pointer. UTF-8 terminal still broken on live cds: https://openqa.opensuse.org/tests/20643/modules/yast2_lan/steps/2 mkfs.btrfs still crashing on lvm: https://openqa.opensuse.org/tests/20633/modules/start_install/steps/3 On top of it are 63 build failures in Factory (send factory reminders yesterday) Of those I will drop the following because they fail for >100 days: openstack-trove openstack-swift openstack-nova openstack-neutron openstack-keystone openstack-heat openstack-glance openstack-cinder openstack-ceilometer openCryptoki pdns-recursor rubygem-chef selinux-policy And possibly more depending on those. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 6

[opensuse-factory] New Factory snapshot 20140828 released!
by Ludwig Nussel 02 Sep '14

02 Sep '14

Changed packages: ==== libdirectfb-1_7-5 ==== - also do not build omap driver [bnc#860256] (internal) ==== Mesa ==== Subpackages: Mesa-32bit Mesa-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv1_CM-devel Mesa-libGLESv1_CM1 Mesa-libGLESv2-2 Mesa-libGLESv2-devel Mesa-libglapi-devel Mesa-libglapi0 Mesa-libglapi0-32bit libOSMesa-devel libOSMesa9 libOSMesa9-32bit libgbm-devel libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r600 libvdpau_radeonsi libwayland-egl-devel libwayland-egl1 libxatracker2 - no longer add /usr/%{_lib}/dri/updates to DRI driver search path (FATE#317822) ==== ModemManager ==== Subpackages: libmm-glib0 - Add ModemManager-1.0.0-systemd-activation.patch: Fix systemd dbus activation (bnc#892682). Systemd does not honor Alias= lines in install sections; that only works if the service file in question is actually enabled. So the dbus service file must refer to ModemManager.service. ==== akonadi-runtime ==== Version update (1.12.91 -> 1.13.0) Subpackages: libakonadiprotocolinternals-devel libakonadiprotocolinternals1 - Update to 1.13.0 * Fixed virtual collections statistics * Fixed tag RID fetch * Fixed HRID-based fetches * Fixed race condition in StorageDebugger * Use FindBacktrace.cmake from CMake 3.0 instead of our own detection ==== alsa-tools ==== - Add "hints" function to hdajackretask: 0002-hdajackretask-Add-hints-functionality.patch ==== amor ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libanalitza0 ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== apache2-mod_perl ==== - Linux::Pid is required by Apache2-SizeLimit (bnc#888117) ==== ark ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkerfuffle4 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== audiofile-devel ==== Subpackages: libaudiofile1 - Add Obsoletes audiofiles-32bit to baselibs.conf ==== audit ==== - If the system has been booted with audit=0 in the kernel cmdline auditd.service must refrain from starting as the relevant kernel subsystem will be permanently disabled. add patch: auditd-donot-start-if-kernel-cmdline-disabled.patch ==== autoyast2 ==== Version update (3.1.54 -> 3.1.56) Subpackages: autoyast2-installation - chroot-scripts: Install script into the chroot environment if it will be called there. (bnc#889931) - 3.1.56 - Supporting registration in installation and upgrade mode while the first stage of installation. (bnc#890073) - 3.1.55 ==== baloo-core ==== Version update (4.13.80 -> 4.14.0) Subpackages: baloo-file baloo-kioslaves baloo-pim baloo-tools libbaloofiles4 libbaloopim4 libbalooqueryparser4 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== bbswitch-kmp-default ==== Subpackages: bbswitch-kmp-desktop bbswitch-kmp-xen - Make architecture exclusive to x86 platform ==== blinken ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== bluez ==== Version update (5.21 -> 5.22) Subpackages: bluez-cups bluez-devel libbluetooth3 - update to version 5.22 This release contains several fixes to HID over GATT (HoG) as well as for AVRCP. Feature-wise there are a couple of notable additions debuting with the Linux kernel 3.17 release: * BR/EDR whitelist support. Starting with Linux kernel 3.17 bluetoothd will no-longer set adapters to connectable by default. Instead, all configured remote devices are added to the kernel whitelist after which the kernel will enable page scanning but only accept connect requests from the whitelist. This effectively reduces the attack surface for unknown devices. When whitelist support is available the general connectable state now follows the discoverable state, meaning discoverable must be enabled for previously unknown devices to be able to connect to us. * Proper LE passive scanning support. For kernels before 3.17 bluetoothd will use the Start/Stop Discovery commands to perform LE background scanning. This however uses LE active scanning which is both wasteful (causing unneeded Scan Requests) and can cause reconnection issues with devices using direct advertising (e.g. most LE mice). From kernel version 3.17 onward bluetoothd will use proper kernel-side passive scanning, making the background scanning both efficient and more interoperable. The kernel will even use the controller-side whitelist during scanning (if no Resolvable Private Addresses are present), saving even more power. ==== bovo ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== calligra ==== Subpackages: calligra-doc calligra-extras-dolphin calligra-extras-okular calligra-krita calligra-stage - Run osc service localrun clean_spec_file - Add calligra-2.8.5-librevenge.patch * port calligra to librevenge framework based libraries. ==== cervisia ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== cifs-utils ==== - Remove cifstab file; obsoleted by the more generic cifs credentials feature. ==== cmake ==== - Also pass -Wl,-z,now lets see if that is passable :) - Import some cmake handing from kf5- and kde4- filesystem to macros: * Simplify debug build handling in macros. Whether debug is on or off is known to optflags * Don't build in release mode, that cramps optimization flags; instead pass wanted flags directly * Pass -Wl,--as-needed -Wl,--no-undefined to linker, to avoid unneeded libs, and to disallow undefined symbols * Add a %make_jobs macro with verbose argument * Simplify %cmake_install invocation - Mark macros as %config - use curl-devel to build with as the internal libcurl is broken with https bnc#892256 - Run tests to avoid such bugs in future - Provide %ctest macro for testing to avoid people having to remember all the arguments ==== cpio ==== - drop cpio-dir_perm.patch * no longer needed since 2.11 * it was dropped from Fedora too and only caused problems (bnc#889138) ==== cpupower ==== Subpackages: libcpupower0 - Fix cpupower_export_tarball_from_git.sh script and make sure msr-index.h is included in the turbostat tarball. - Update turbostat to latest 3.17 kernel version (in fact it is 3.16-rc7) This fixes bnc#891523 ==== cryptsetup ==== Subpackages: libcryptsetup4 libcryptsetup4-32bit - Use --enable-gcrypt-pbkdf2 to use the PBKDFv2 method from libgcrypt. ==== device-mapper ==== Subpackages: device-mapper-32bit - add new option "integrated_flush" to device-mapper bnc#890959, patch: add_integrate_flush_flag.patch ==== dhcp ==== Subpackages: dhcp-client dhcp-doc dhcp-relay dhcp-server - Disabled /sbin/service legacy-action hooks on openSUSE <= 13.1, which does not support it and causes build failure (bnc#891961). ==== dleyna-connector-dbus ==== Version update (0.1.0 -> 0.2.0) - Update to version 0.2.0: + Updated to work with latest version of dLeyna-core. ==== dleyna-renderer ==== Version update (0.1.3 -> 0.4.0) - Update to version 0.4.0: + Added support for Network filtering. + Settings can now be modified via d-Bus. + The OpenURI method now adheres to the MPRIS2 standard. + Use MIME Type from GUPnP-DLNA if available. ==== dmraid ==== - Rename README.SuSE to README.SUSE (bnc#889025). ==== dracut ==== - dracut.sh: check for logfile (--logfile option) and create it if necessary Add 0139-dracut.sh-check-for-logfile-logfile-option-and-creat.patch - Avoid duplicate names in host_devs Add 0140-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch - iscsi: Avoid bad ip route call on empty address Add 0141-iscsi-Avoid-bad-ip-route-call-on-empty-address.patch - 40network: Don't report error for .../ifroute-* during module setup Add 0142-40network-Don-t-report-error-for-etc-sysconfig-netwo.patch - iscsi: Fix up ipv6 in brackets , iterate over all needed iscsi mounts Add 0143-iscsi-Fix-up-ipv6-in-brackets-iterate-over-all-possi.patch - 90crypt: Fixed crypttab_contains() to also work with device in /etc/crypttab Add 0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch - 40network: handle 'ip=ifname:static' correctly (bnc#892801) Add 0145-40network-handle-ip-ifname-static-correctly.patch - Allow multiple configurations per network interface (bnc#887906) Add 0133-Allow-multiple-configurations-per-network-interface-.patch - Remove bootdev warning (bnc#881112) Add 0134-Remove-bootdev-warning-bnc-881112.patch - check for existance of 69-dm-lvm-metad.rules in modules_setup.sh, lvm module (bnc#891791) Add 0135-lvm-Fix-12819a579900b9691e2-check-for-existance-of-6.patch - Moved persistent network rule revert to another file (was not in github): Delete: 0133-Remove-70-persistent-net.rules.patch Add: 0136-Revert-95udev-rules-add-persistent-network-rule.patch - dracut-use-fipscheck-openssl.patch: Switch from Mozilla NSS sha256hmac checking to fipscheck as recommended Add: 0137-Switch-from-Mozilla-NSS-sha256hmac-checking-to-fipsc.patch - warpclock: Do not use warpclock module on S390(x), hwclock does not exist there (bnc#884513) Add 0138-warpclock-Do-not-use-warpclock-module-on-S390-x-hwcl.patch ==== dragonplayer ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libfox1_6 ==== Version update (1.6.49 -> 1.6.50) - update to 1.6.50: + no upstream changes available ==== gdb ==== Version update (7.7 -> 7.8) - Enable running the testsuite and store results in a gdb-testresults package. - Add gdb-rpmlintrc to filter errors about the buildroot mentioned in testresult logs. - Use patchlist.pl to merge with gdb-7.8-16.fc22, a rebase to FSF GDB 4.8. The GDB 4.8 features are: * Guile scripting support. * Python scripting enhancements. * New commands: * * guile * * guile-repl * * info auto-load guile-scripts [REGEXP] * New options: * * maint ada set ignore-descriptive-types (on|off) * * maint set target-async (on|off) * * set|show auto-load guile-scripts (on|off) * * set|show auto-connect-native-target * * set|show guile print-stack (none|message|full) * * set|show mi-async (on|off) * * set|show print symbol-loading (off|brief|full) * * set|show record btrace replay-memory-access (read-only|read-write) * Remote Protocol: * * The qXfer:btrace:read packet supports a new annex 'delta'. * GDB/MI: * * A new option "-gdb-set mi-async" replaces "-gdb-set target-async". * New target configurations: * * PowerPC64 GNU/Linux little-endian * btrace enhancements: * * The btrace record target now supports the 'record goto' command. * * The btrace record target supports limited reverse execution and replay. * ISO C99 variable length automatic arrays support. * It is no longer required to "set target-async on" in order to use background execution commands (e.g., "c&", "s&", etc.). * "catch syscall" now implemented on s390*-linux* targets. * The "compare-sections" command now works on all targets. * The "target native" command now connects to the native target, and can be used to launch native programs, even if "set auto-connect-native-target" is set to off. * More robust backtraces. [bnc#891040] - Obsoletes patch gdb-7.7-bnc877566.patch - Obsoletes patch gdb-fix-s390-build.patch - Obsoletes patch gdb-ppc64le.patch - Drop gdb-ia64-tdep.patch, disable building the IA64 target - Modifies gdb-6.3-test-pie-20050107.patch, gdb-6.5-bz218379-solib-trampoline-lookup-lock-fix.patch, gdb-6.6-buildid-locate-core-as-arg.patch, gdb-6.6-buildid-locate-rpm.patch, gdb-6.6-buildid-locate.patch, gdb-6.6-scheduler_locking-step-is-default.patch, gdb-6.6-scheduler_locking-step-sw-watchpoints2.patch, gdb-6.8-attach-signalled-detach-stopped.patch, gdb-6.8-quit-never-aborts.patch, gdb-archer-pie-addons-keep-disabled.patch, gdb-archer-pie-addons.patch, gdb-archer.patch, gdb-attach-fail-reasons-5of5.patch, gdb-glibc-strstr-workaround.patch, gdb-rhbz795424-bitpos-20of25.patch, gdb-rhbz795424-bitpos-21of25.patch, gdb-rhbz795424-bitpos-22of25.patch, gdb-rhbz795424-bitpos-23of25.patch, gdb-rhbz795424-bitpos-25of25.patch, gdb-upstream.patch - Adds gdb-archer-vla-tests.patch, gdb-bz533176-fortran-omp-step.patch, gdb-bz541866-rwatch-before-run.patch gdb-6.6-buildid-locate-misleading-warning-missing-debuginfo-rhbz981154.patch, gdb-babeltrace-configure.patch, gdb-btrobust.patch, gdb-dts-rhel6-python-compat.patch, gdb-fortran-frame-string.patch, gdb-gnat-dwarf-crash-3of3.patch, gdb-python-completer-1of2.patch, gdb-python-completer-2of2.patch, gdb-readline-6.3.5.patch, gdb-vla-intel-04of23-fix.patch, gdb-vla-intel-stringbt-fix.patch, gdb-vla-intel.patch - Removes gdb-rhel5-gcc44.patch, gdb-6.6-bfd-vdso8k.patch, gdb-testsuite-nohostid.patch, gdb-python-stacksmash.patch ==== git ==== Version update (2.0.4 -> 2.1.0) Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - git 2.1.0 - incompatible changes: * default pager configuration no longer wraps long lines. To restore: $ git config core.pager "less -S" $ git config pager.blame "less -S" - Changes to specific UI, configuration, workflow and features - Bug fixes and internal improvements - Full list: https://raw.githubusercontent.com/git/git/master/Documentation/RelNotes/2.1… - remove pathc, upstream: 0001-git-subtree-Use-gitexecdir-instead-of-libexecdir.patch ==== gnome-packagekit ==== - Add gnome-packagekit-fix-polkit-usage.patch: properly call polkit and dbus for reboot (bnc#881221). ==== libgssdp-1_0-3 ==== Version update (0.14.9 -> 0.14.10) - Update to version 0.14.10: + DOAP fixes. + Fix SSDP when running on the same host. + Bug fixed: bgo#733851. ==== gwenview ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== harfbuzz-devel ==== Version update (0.9.30 -> 0.9.35) Subpackages: libharfbuzz-icu0 libharfbuzz0 libharfbuzz0-32bit - Update to version 0.9.35: + Fix major shape-plan caching bug when more than one shaper were provided to hb_shape_full() (as exercised by XeTeX). + Fix Arabic fallback shaping regression. + Major hb-coretext fixes. That backend is complete now, including respecing buffer direction and language, down to vertical writing. + Build fixes for Windows CE. + Misc fixes: - Use atexit() only if it's safe to call from shared library. fdo#82246 - Mandaic had errors in its Unicode Joining_Type. fdo#82306 + API changes: - hb_buffer_clear_contents() does not reset buffer flags now. - Changes from version 0.9.34: + hb_feature_from_string() now accepts CSS font-feature-settings format. + As a result, hb-shape / hb-view --features also accept CSS-style strings. Eg, "'liga' off" is accepted now. + Add old-spec Myanmar shaper: fdo#81775 + Don't apply 'calt' in Hangul shaper. + Fix mark advance zeroing for Hebrew shaper: fdo#76767 + Implement Windows-1256 custom Arabic shaping. Only built on Windows, and requires help from get_glyph(). + Disable 'liga' in vertical text. + Build fixes. + API changes: - Make HB_BUFFER_FLAG_BOT/EOT easier to use. - Changes from version 0.9.33: + Turn off ARabic 'cswh' feature that was accidentally turned on. + Add HB_TAG_MAX_SIGNED. + Make hb_face_make_immutable() really make face immutable! + Windows build fixes. - Changes from version 0.9.32: + Apply Arabic shaping features in spec order exactly. + Another fix for Mongolian free variation selectors. + For non-Arabic scripts in Arabic shaper apply 'rlig' and 'calt' together. + Minor adjustment to U+FFFD logic. + Fix hb-coretext build. - Changes from version 0.9.31: + Only accept valid UTF-8/16/32; we missed many cases before. + Better shaping of invalid UTF-8/16/32. Falls back to U+FFFD REPLACEMENT CHARACTER now. + With all changes in this release, the buffer will contain fully valid Unicode after hb_buffer_add_utf8/16/32 no matter how broken the input is. + Fix Mongolian Variation Selectors for fonts without GDEF. + Fix minor invalid buffer access. + Accept zh-Hant and zh-Hans language tags. hb_ot_tag_to_language() now uses these instead of private tags. + Build fixes. + New API: - hb_buffer_add_codepoints(). This does what hb_buffer_add_utf32() used to do, ie. no validity check on the input at all. add_utf32 now replaces invalid Unicode codepoints with the replacement character. - hb_buffer_set_replacement_codepoint() - hb_buffer_get_replacement_codepoint() Previously, in hb_buffer_add_utf8 and hb_buffer_add_utf16, when we detected broken input, we replaced that with (hb_codepoint_t)-1. This has changed to use U+FFFD now, but can be changed using these new API. ==== help2man ==== Version update (1.43.3 -> 1.46.1) - Update to version 1.46.1: * Update translations. * Apply texinfo patch from Mario Bl�tterman. * Rename aclocal macros with LOCAL_ prefix. * Include "missing" program from automake in distribution. * Add LOCAL_PROG_OR_MISSING macro. * Change reference to standards to avoid spurious comma. to Yuri Chornoivan). Jakub Bogusz). * Move automake helper scripts into a build-aux sub-directory. * Add a helper script to locate files in $VPATH. + fixup-tex-pot: remove entries from template which should not be translated. + fixup-texi-trans: add the correct path for install-info and correct the alignment of the main menu. From 1.45.1: * Skip additional blank lines following sections, and provide an explicit method of adding sections (thanks to Mischa Williamson). * Improve handling of tagged paragraphs when the body is on a following line (thanks to Brian Campbell). * Add escapes to adjust spacing of italic text at roman/italic boundaries (thanks to Bjarni Ingi Gislason, closes: #742289) From: 1.44.1: * Perform shell word splitting on option lines in include files. * Update translations. * Update copyright years. * Change distribution filename in README to help2man-VERSION.tar.xz * Fix gitweb URL in README. ==== hwinfo ==== Version update (21.5 -> 21.6) Subpackages: hwinfo-devel - create floppy entry only if there really is a floppy device (bnc #883465) - 21.6 ==== ilmbase-devel ==== Subpackages: libHalf11 libIex-2_1-11 libIexMath-2_1-11 libIlmThread-2_1-11 libImath-2_1-11 - Add obsoletes to baselibs.conf. ==== java-1_7_0-openjdk ==== Subpackages: java-1_7_0-openjdk-devel java-1_7_0-openjdk-headless - Removed patches unused patches: * java-1.7.0-openjdk-debugdocs.patch * java-1.7.0-openjdk-debuginfo.patch - Use SUSE in names, not SuSE. bnc#889006 - Don't try to run multiprocess on aarch64 where we are normally using qemu. Qemu cannot guarantee that in user emulation mode signals will be delivered to the correct thread - Added patch: file-contains-date-and-time.patch * fix rpmlint warning and diminish number of rebuilds - Make sample/rmi/java-rmi.cgi * fix rpmlint warning about no-executable file with shebang - Run "osc service localrun clean_spec_file" on the package * fix manually some shortcomings - Use released icedtea-sound-1.0.1 tarball * rename libpulse-java.so -> libicedtea-sound.so * rename pulse-java.jar -> icedtea-sound.jar - Remove dependencies on autoconf and automake * no need to re-autogenerate any more - Make zero build usable also on aarch64 (--with zero option) - Run osc service localrun clean_spec_file on the package - Modified patch: * java-1_7_0-openjdk-suse-desktop-files.patch - change categories for policytool.desktop ==== java-1_7_0-openjdk-plugin ==== - Touch link targets in order to silence test of broken symlinks - Update icedtea-web-suse-desktop-files.patch: Add X-GNOME-SystemSettings category. ==== juk ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php - Drop 0001-fix-the-appdata-dir.patch (merged upstream) ==== k3b ==== - Use kde4-macros for filelists, k3b uses kdelibs4 buildsystem ==== kalgebra ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kalzium ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Make devel package require libkdeedu4-devel - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kio_kamera ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kanagram ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kapptemplate ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kate ==== Version update (4.13.80 -> 4.14.0) Subpackages: kate-devel kwrite libktexteditor - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.14/ - Add subpackage for the python plugins - Requires additional python requires for full functionality - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== katomic ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kbd ==== Version update (2.0.1 -> 2.0.2) - drop kbd-1.15.2-chvt-userwait.patch [bnc#830805] (internal) (--userwait seems to not be used anywhere) - remove testutf8 stub (2009: testutf8 will be soon removed completely, it's kept only not to break /etc/profile currently) - Update to version 2.0.2: libkeymap: fix kmap on big-endian machines Add functions to get the total number of elements Add functions to convert ksyms eurlatgr - new Linux console font Hide syms array Add information about the total number of elements Add function to obtain items from the diacritical table Change the API for working with the diacritical table Change API for working with list of functions Add functions to check diacr/func existance Add pancyrillic font po: Update translations (from translationproject.org) vlock: implement PAM account and password management vlock: rename ERROR_TIMEOUT macro to LONG_DELAY vlock: introduce short delays after non-fatal PAM errors Added Latvian keymap (changelog taken from http://lists.altlinux.org/pipermail/kbd/2014-July/000476.html) - add kbd-2.0.2-comment-typo-qwerty.patch [bnc#825385] - SuSE -> SUSE [bnc#889035] ==== kblackbox ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kblocks ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kbounce ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kbreakout ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kbruch ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kcachegrind ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kcalc ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kcharselect ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kcolorchooser ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kcron ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kde-mplayer-thumbnailer ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kde4-filesystem ==== Version update (4.13.80 -> 4.14) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kde4-l10n-cs ==== Version update (4.13.80 -> 4.14.0) Subpackages: kde4-l10n-da kde4-l10n-de kde4-l10n-de-data kde4-l10n-el kde4-l10n-en_GB kde4-l10n-en_GB-data kde4-l10n-en_GB-doc kde4-l10n-es kde4-l10n-es-data kde4-l10n-fr kde4-l10n-fr-data kde4-l10n-hu kde4-l10n-it kde4-l10n-it-data kde4-l10n-ja kde4-l10n-pl kde4-l10n-pl-data kde4-l10n-pt kde4-l10n-pt_BR kde4-l10n-pt_BR-data kde4-l10n-ru kde4-l10n-ru-data kde4-l10n-ru-doc kde4-l10n-zh_CN kde4-l10n-zh_TW - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.14/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kde4-print-manager ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdeartwork4-decorations ==== Version update (4.13.80 -> 4.14.0) Subpackages: kdeartwork4-screensaver - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== dolphin ==== Version update (4.13.80 -> 4.14.0) Subpackages: kdebase4-libkonq kdebase4-nsplugin kdepasswd kdialog keditbookmarks konqueror konqueror-plugins libkonq-devel libkonq5 plasmoid-folderview - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Rename rpmlintrc to %{name}-rpmlintrc. Follow the packaging guidelines. - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdebase4-runtime ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Use kde4_macros for includes - Install kdesu symlink via update-alternatives (for better coexistence with kde-cli-tools) - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdebase4-session ==== - Remove unnecessary buildrequires on kde4-filesystem. Not used - Cleanup spec-file with obsolete obsoletes/provides ==== kde4-kgreeter-plugins ==== Subpackages: kdebase4-workspace kdebase4-workspace-devel kdebase4-workspace-ksysguardd kdebase4-workspace-liboxygenstyle kdebase4-workspace-libs kdm kwin oxygen-cursors4 python-kdebase4 - changeset_re8241313fc979aefafc8c2a0207570d6394f1580.diff: Require strict binding for intel driver (bnc#892305) ==== kdebindings-smokegen ==== Version update (4.13.80 -> 4.14.0) Subpackages: libsmokegen-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libsmokekde-devel ==== Version update (4.13.80 -> 4.14.0) Subpackages: libsmokekde3 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libsmokeqt ==== Version update (4.13.80 -> 4.14.0) Subpackages: libsmokeqt-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdelibs4 ==== Version update (4.13.80 -> 4.14.0) Subpackages: kdelibs4-core kdelibs4-doc libkde4 libkde4-devel libkdecore4 libkdecore4-devel libksuseinstall-devel libksuseinstall1 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdenetwork4-filesharing ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== akonadi ==== Version update (4.13.80 -> 4.14.0) Subpackages: akregator blogilo kaddressbook kalarm kdepim4 kjots kmail knode knotes kontact korganizer ktimetracker ktnef libkdepim4 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php - Drop reenable-some-docs.diff (merged upstream) ==== kdepim4-runtime ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdepimlibs4 ==== Version update (4.13.80 -> 4.14.0) Subpackages: libakonadi4 libkdepimlibs4 libkdepimlibs4-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Move akonadi2xml to libkdepimlibs4-devel, as it is a development tool - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kio_svn ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdesdk-strigi-analyzers ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdesdk4-scripts ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kfilereplace ==== Version update (4.13.80 -> 4.14.0) Subpackages: kimagemapeditor klinkstatus - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdf ==== Version update (4.13.80 -> 4.14.0) Subpackages: kwikdisk - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdiamond ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdnssd ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdump ==== - specfile: Remove call to mkinitrd_setup. With dracut, this is completely useless; with mkinitrd, the setup script is run automatically after a new mkinitrd script is installed. ==== kexec-tools ==== - custom autoconf action was no longer setting HAVE_LIBXENCTRL (bnc#886873) - Do not package kdump.8 as it is only a placeholder, full man page is provided by kdump package (bnc#892090) ==== kfilemetadata ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kfloppy ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kgamma ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kgeography ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kget ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kgoldrunner ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kgpg ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== khangman ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkhangmanengine4 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Use standard macro for khangman includes as the package uses internal buildsystem - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kig ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kio_audiocd ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kiriki ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== fonts-KanjiStrokeOrders ==== Version update (4.13.80 -> 4.14.0) Subpackages: kiten - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kiwi-config-openSUSE ==== - workaround for bnc#892087, add e2fsprogs to bootinclude packages ==== kjumpingcube ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== klettres ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kmag ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kmahjongg ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kmines ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kmix ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kmousetool ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kmouth ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kmplot ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== knavalbattle ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== knetwalk ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kolf ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kollision ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kolourpaint ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kompare ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Use kde4-macros for includes, kompare uses kdelibs4 buildsystem - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== konquest ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== konsole ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kopete ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Use kde4-macros for includes, kopete uses kdelibs4 buildsystem - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kpat ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kppp ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kqtquickcharts ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== krb5 ==== Subpackages: krb5-32bit krb5-client krb5-devel - buffer overrun in kadmind with LDAP backend CVE-2014-4345 (bnc#891082) krb5-1.12-CVE-2014-4345-buffer-overrun-in-kadmind-with-LDAP-backend.patch ==== krdc ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Use kde4-macros: krdc uses kdelibs4 buildsystem - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kremotecontrol ==== Version update (4.13.80 -> 4.14.0) Subpackages: liblibkremotecontrol1 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kreversi ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== krfb ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kruler ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ksaneplugin ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kscd ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kshisen ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ksirk ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ksnapshot ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kspaceduel ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ksquares ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kstars ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ksudoku ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ksystemlog ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kteatime ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ktimer ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ktouch ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kturtle ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ktux ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kubrick ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kwalletmanager ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kwordquiz ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libapr1 ==== Subpackages: libapr1-devel - 0004-Backport-r1593600-from-1.6.patch memory leak apr_pvsprintf() - 0005-Backport-r1593612-from-1.6.patch Missing error codes in apr_error_string() - 0007-backport-r1604596-1604598-from-trunk.patch memory corruption in apr_skiplist - 0009-Merge-r1610854-from-trunk.patch posix semaphore must handle EINTR. ==== libassuan-devel ==== Version update (2.1.1 -> 2.1.2) Subpackages: libassuan0 - update to 2.1.2: * Added support for ppc64le. ==== libbaloowidgets4 ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libcamgm100 ==== Version update (1.0.5 -> 1.0.6) Subpackages: perl-camgm - version 1.0.6 - convert certificate policies to OID only (bnc#889356) - add test for X509v3 Any Policy - update translation files ==== libdbi3 ==== Version update (0.9.0.g30 -> 0.9.0.g32) - Update to git snapshot 0.9.0+git32 * dbi: an unintialized variable (rightfully flagged by valgrind) was fixed ==== libgdata-devel ==== Version update (0.15.1 -> 0.15.2) Subpackages: libgdata19 typelib-1_0-GData-0_0 - Update to version 0.15.2: + Support PicasaWeb in the GOA authoriser. + Fix a data corruption bug in the downloads/uploads code. + Bugs fixed: - bgo#731269: Wrong scope information in authorization domain. - bgo#731949: Memory leak from gdata_parser_int64_to_iso8601(). - bgo#731946: Removing a task result in error, but succeeds. - bgo#732890: Refresh authoriser on receiving SOUP_STATUS_NOT_FOUND. + Updated translations. ==== libgphoto2-6 ==== Version update (2.5.4.1 -> 2.5.5) Subpackages: libgphoto2-6-32bit libgphoto2-devel - ptp2: Nikon 1 support. Final fix to get it running by Raj Kumar of archive.org. Nikon: liveview capture without autofocus enhanced, now also for card Nikon: restart liveview after capture Canon EOS: New property reporting method (OLC Info) implemented. Print read-only values in configuration table lookup (for Canon EOS mostly) Sony: Fixed Sony SLT-A900v capture Fixed the various "datetime" hooks for PTP generic, Canon Powershot and Canon EOS to hopefully work better. --set-config datetime=now sets the camera to the current time. CHDK: some changes New ids: Nikon DSC D3x, D5300 Nikon Coolpix P330 Canon PowerShot S95, S120, SX260HS, SX280HS, SX160IS, A2500, A2600, Elph135, IXUS 300HS, IXUS 255HS Canon EOS 1200D Sony DSC-A900, Alpha 6000, DSC-HX5V Casio EX-ZR700, Fuji FinePix AV-150, T200 Massive logging and error handling cleanup by Axel Waggershauser cleanup of the USB data handling Bugfixes - st2205: add support for a new type of 240x320 picture frames - all: Massive logging and error handling cleanup by Axel Waggershauser. Various cleanups from David Berrange for mingw32 builds. fixed libgd detection and linking. - print-camera-list add a mode to print udev rules for the non-standard USB support (usbscsi/usbdisk), needed additional to HWDB databases. - translations: updated ukrainian, vietnamese, polish, french, finish, chinese, danish, dutch, ==== libkcddb4 ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkcddb4-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libkcompactdisc4 ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkcompactdisc4-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libkdcraw-devel ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkdcraw23 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libkdeedu4-data ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkdeedu4-devel libkeduvocdocument4 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Use kde4-macros for includes: package uses kdelibs4 buildsystem - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kdegames4-carddecks-default ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkdegames libkdegames-devel libkdegames6 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libkexiv2-11 ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkexiv2-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libkgapi2-2 ==== Version update (2.1.80 -> 2.2.0) - Update to 2.2.0 * Final release ==== libkipi-devel ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkipi11 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libkmahjongg ==== Version update (4.13.80 -> 4.14.0) Subpackages: libkmahjongg-devel libkmahjongglib4 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libkomparediff2-4 ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libksane-devel ==== Version update (4.13.80 -> 4.14.0) Subpackages: libksane0 - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Added kde4_includes.patch: search for includes in standard kde4 include directory (don't assume it's hardcoded to include/ ) - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libmtp-devel ==== Version update (1.1.6 -> 1.1.7) Subpackages: libmtp9 - updated to 1.1.7 - Soname libmtp.so.9.2.0 - binary compatible, new interfaces have been added. - Compilation fixes for older GCC and non-GCC compilers. - Finalize >4GB file transfer changes so this works now. - A new API to check for device capabilities has been added. - Sync in latest upstream ptp2 changes. - Support for USB 3.0! (A patch adding async buffering was reverted after deemed instable by Debian.) - Some migration toward the new API in the examples. - Use parent storage if available as default storage media. - Force reset on close for Android devices. - Handle integrated USB hubs in mtp-probe. - Devices, devices, devices... - mtpz-use-LIBMTP_ERROR-instead-of-LIBMTP_INFO.patch: is upstream - music-players.h: use up to date 1.1.7 version again. ==== libosinfo ==== Version update (0.2.10 -> 0.2.11) Subpackages: libosinfo-1_0-0 - Update to version 0.2.11: + Document hostname limitations. + Export OSINFO_*_VERSION macros. + Add desktop scripts for Debian. + Add API to query install scripts if they require an internet connection. + Some fixes to Debian JEOS script. + Add/improve/fix data on: - CentOS - Debian - FreeBSD - Microsoft Windows 7 - Microsoft Windows 8 - Microsoft Windows Server 2012 - Microsoft Vista - OpenBSD - OpenSUSE - Red Hat Enterprise Linux 7 + More ISO detection testcases. + Many performance improvements. + Fixes to documentation. + Fixes to build. ==== libpcap1 ==== Version update (1.5.3 -> 1.6.1) - libpcap 1.6.1: * some fixes for the any device * changes for how --enable-XXX works - includes changes from 1.6.0: * fixes for byte order issues with NFLOG captures * Handle using cooked mode for DLT_NETLINK in activate_new(). removing libpcap-netlink.patch, upstream, [bnc#863823] * on platforms where you can not capture on down interfaces, do not list them, but: do list interfaces which are down, if you can capture on them! - libpcap does not build with bluez 5.21, disable bluetooth ( bluetooth/mgmt.h moved to kernel ) ==== libpng16-16 ==== Version update (1.6.12 -> 1.6.13) Subpackages: libpng16-16-32bit libpng16-devel - updated to 1.6.13: a "cleanup" release that have no security fixes or new features. ==== libpwquality1 ==== Version update (1.2.3 -> 1.2.4) - Update to version 1.2.4: + Add Python3 module subpackage. ==== libqt4 ==== Subpackages: libqt4-32bit libqt4-devel libqt4-linguist libqt4-qt3support libqt4-qt3support-32bit libqt4-sql libqt4-sql-32bit libqt4-sql-sqlite libqt4-sql-sqlite-32bit libqt4-x11 libqt4-x11-32bit - added _constraints. building took up to 7GB of disk space on s390x, and more than 6GB on x86_64 ==== libreoffice ==== Version update (4.3.0.3 -> 4.3.0.4) Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions - Require some fonts for compat: liberation / carlito fonts. bnc#824908 - Version bump to 4.3.0.4: * Final 4.3.0 release containing handful of last fixes from the 4.3.0.4 - Try to sort out broken help after migration from 13.1 - Add more provides/obsoletes for lang help files to better handle migration. ==== gdk-pixbuf-loader-rsvg ==== Version update (2.40.2 -> 2.40.3) Subpackages: librsvg-2-2 librsvg-devel typelib-1_0-Rsvg-2_0 - BuildIgnore adwaita-icon-theme: Avoid cycle: we do not require the adwaita-icon-theme to be present. libgtk-3.0 requires this for end users. - Update to version 2.40.3: + Bugs fixed: bgo#731182, bgo#710310, bgo#721354. ==== libsigc++2-devel ==== Version update (2.3.1 -> 2.3.2) Subpackages: libsigc-2_0-0 - Update to version 2.3.2: + Note: The implementation of bgo#724496 breaks API for some users, but it does not break ABI. Only users who have added their own visit_each() overloads are affected by the API break. Their programs will still compile, but there will be run-time errors, if they rely on auto-disconnection of slots. Updated instructions for users who implement their own adaptors are found in the description of sigc::adapts<>. + Replace visit_each() overloads by struct visitor<>. Add the test_visit_each test case (bgo#724496). + signal_impl::notify(): Don't delete signal_impl during erase() (bgo#564005). + Fix 'make check' with clang++ 3.4 and --enable-warnings=fatal (bgo#724496). + Fix test_cpp11_lambda for gcc 4.8. + Speed up disconnection of slots (bgo#167714). + Auto-generate the ChangeLog from the git log for 'make dist'. + Don't use __file__ in the FIREWALL m4 macro (bgo#699168). + Add the track_obj() adaptor and test_track_obj test case. Deprecate libsigc++ lambdas, sigc::group() and sigc::var(). Use C++11 lambda expressions instead (bgo#672555). + Documentation: - Emphasize that signals are reference counted (bgo#611941). - Mention std::function<> and std::bind() where appropriate. - Use DOXYGEN_SHOULD_SKIP_THIS consistently to exclude internal functions from the reference documentation. + Windows: - Enable C++11 lambda expressions with MS Visual Studio 2012 and later (bgo#733752). - Update MSVC_Net2010 (bgo#724496). ==== libstorage-ruby ==== Subpackages: libstorage5 - per default zero (wipefs) new partitions (bnc#891956) ==== libvirt ==== Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-driver-xen libvirt-daemon-qemu libvirt-daemon-xen - remove not necessary hunks from libvirt-ppc64le-support.patch - move new patches to section for to be upstreamed - add patch: libvirt-power8-models.patch add current power8 cpu models to map - add patch: libvirt-ppc64le-support.patch add preliminary ppc64le support to libvirt ==== libvirt-glib-1_0-0 ==== Version update (0.1.8 -> 0.1.9) Subpackages: typelib-1_0-LibvirtGLib-1_0 - Update to version 0.1.9: + Add support for spiceport chardev. + Misc fixes to build system. + Fix ref counting of snapshot devices. + Add API for deleting snapshots. + Fix RPM layout for vala files. + Fix race in build of vala code. + Add API for getting security models. + Add classes for dealing with CPU models. + Fix enum generation. + Add API for fetching snapshots. - Drop 0b4d331b-secmodel-caps.patch: Fixed upstream. ==== libvorbis-devel ==== Subpackages: libvorbis0 libvorbis0-32bit libvorbisenc2 libvorbisenc2-32bit libvorbisfile3 libvorbisfile3-32bit - Fix obsoletes and provides in baselibs.conf. ==== libxml2-2 ==== Subpackages: libxml2-2-32bit libxml2-devel libxml2-tools - Add obsoletes/provides to baselibs.conf. ==== libyui-qt6 ==== Version update (2.46.12 -> 2.46.13) - Fixed Table(:multiSelection) selecting 1st item when focused (bnc#888090). - 2.46.13 ==== libLLVM ==== Subpackages: libLLVM-32bit - Fix the sed line for minimal damage. ==== lokalize ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== lskat ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== lxpanel ==== Version update (0.6.2 -> 0.7.0) Subpackages: lxpanel-lang - New upstream version 0.7.0 * New plugin 'launchtaskbar' with combined functionality from 'launchbar' and 'taskbar'. For easy support codebase is merged instead of doing duplicates but appearance is still the same in dependency from mode chosen. * Integrated with LibFM, all launching and application selection in the launchbar settings is done by LibFM now. * New simpler plugins API implementation, using LibFM plugins loader. In new API some callbacks were simplified and some removed, see all the detailed descriptions in the file plugin.h. * New plugins are GtkWidgets now, therefore there is no explicit destroy for them or their data, all will be handled implicitly. * Changed config access with simple API similar to libconfig one. * Using icon caching from LibFM. * Applications properties in the menu are managed by LibFM API, no more calls to lxshortcut application. * Setting for file manager is not handled on its own but XDG setting is used now, i.e. default choice for "inode/directory" MIME type. * Setting for terminal is handled by LibFM, therefore it is the same as in PCManFM now, no own setting anymore. * Replaced configure option --enable-cast-checks with - -enable-debug. * Replaced 'pager' plugin with former 'wnckpager' one. The 'wnckpager'name is still supported for compatibility but it is the same plugin. * Added new plugin 'weather', written by Piotr Sipika. * Using drag & drop handling from LibFM in launchbar. It is possible now to use any kind of files as launchbuttons, and folders can receive drops as well. * Allowed drag applications from system menu plugin so they now can be dropped somewhere. The obvious example is drop on the desktop. * Using human readable sensor names if available (like 'Core 0', etc.). * Panel is allowed to hide completely (setting width when hidden to 0). * The IconGrid converted into GtkContainer derived class PanelIconGrid. * Allowed to use <USER_CONFIG_DIR>/lxpanel/<profile>/gtkrc for the panel custom style setup. * The panel itself in not a struct now but a GtkWindow derived class so no special API to destroy it is required. * Improved the layout of icons in panel, they will not align to the edge of screen but appropriately to panel height. Some of them did that already but some were aligned to the screen edge without any gap. * The button to configure plugin in panel plugins configuration tab is renamed from 'Edit' to 'Properties'. * All logging is unified. The option --log is deprecated and isn't used anymore. User can change logs appearance using G_MESSAGES_DEBUG and G_MESSAGES_PREFIXED environment variables (see GLib docs). * Old APIs are in place still for backward compatibility with third party plugins but will be dropped later, supposedly on next feature release point. Old APIs are not present in public headers, compatibility is on binary level only. * A whole lot of bugfixes. - added lxpanel-0.7.0-fix-crash-after-click-on-empty-part-of-panel.patch to make LXPanel not to crash when it's clicked on an empty part ==== lxterminal ==== Subpackages: lxterminal-lang - added lxterminal-0.1.11_fix_ctrl_c_break.patch to fix bnc#891851 ==== libastro1 ==== Version update (4.13.80 -> 4.14.0) Subpackages: libmarblewidget19 marble marble-data marble-devel marble-doc - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Use standard macros for marble includes, as it uses internal location (not relying on kdelibs4 one) - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== mobipocket ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Added kde4_includes.patch: search for includes in standard kde4 include directory (don't assume it's hardcoded to include/ ) - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== mono-kde4 ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libqyoto2 ==== Version update (4.13.80 -> 4.14.0) Subpackages: mono-qt4 mono-qt4-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kpartx ==== Subpackages: multipath-tools - Revert to ACT_RELOAD in domap() if the map exists - multipathd: asynchronous configuration (bnc#891189) - multipathd: timeout CLI commands when waiting for lock (bnc#891189) - Remove dm_udev_XXX wrapper functions - uxlsnr: use typedef for trigger function - multipathd: lock cli client list - multipathd: Use standard lists for CLI handling - Use strlen() when checking for valid wwid - kpartx: zero out cookie (bnc#890902) - multipathd: Check for empty wwid when processing events (bnc#892214) - Fixup device-mapper cookie handling yet again (bnc#890902) - Allow zero-sized devices during configuration - multipathd: issue warning on CLI command timeout (bnc#891189) - Do not remove paths without uevent (bnc#890998) - Fixup structure misalignment in config.h (bnc#890747) - Do not print empty multipaths section - Fixup 'uxsock_timeout' handling - Reload map if reinstate failed (bnc#890854) - Close memory leak in print_multipath_topology - Implement 'uxsock_timeout' keyword (bnc#890551) - Return error when receiving CLI packet (bnc#890551) - multipath: do not print state 'orphan' for option '-l' (bnc#890551) - Fix race conditions during uevent processing (bnc#890994) ==== mupdf ==== Version update (1.4 -> 1.5) - update to version 1.5 * This is a bugfix release: dozens of bugs have been found and exterminated! * A typo resulting in a potential stack overflow that could corrupt files when saving edits to a PDF has been fixed. Another bug which caused a significant slowdown has also been fixed. ==== nmap ==== Version update (6.46 -> 6.47) - Nmap 6.47: * updated IPv4 OS fingerprints * Removed the External Entity Declaration from the DOCTYPE in Nmap's XML. The doctype is now: <!DOCTYPE nmaprun> * Ncat: Fixed SOCKS5 username/password authentication * Avoid formatting NULL as "%s" when running nmap --iflist * Zenmap, Ndiff: Avoid crashing with old PyXML package * Handle ICMP admin-prohibited messages when doing service version detection. * NSE: Fix a bug causing http.head to not honor redirects. * Zenmap: Fix a bug in DiffViewer causing a crash - fix self-obsoletion of zenmap (nmap-gtk) ==== okteta ==== Version update (4.13.80 -> 4.14.0) Subpackages: okteta-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Use kde4-macros for filelists, okteta uses kdelibs4 buildsystem - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== okular ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Added kde4_includes.patch: search for includes in standard kde4 include directory (don't assume it's hardcoded to include/ ) - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libopenobex2 ==== - Added patches: * openobex-1.7.1-fix_udev_rules.patch Fixed 60-openobex.rules with 'TAG+="uaccess"' (bnc#858863) ==== libopenssl-devel ==== Version update (1.0.1h -> 1.0.1i) Subpackages: libopenssl1_0_0 libopenssl1_0_0-32bit openssl - openssl.keyring: the 1.0.1i release was done by Matt Caswell <matt(a)openssl.org> UK 0E604491 - rename README.SuSE (old spelling) to README.SUSE (bnc#889013) - update to 1.0.1i * Fix SRP buffer overrun vulnerability. Invalid parameters passed to the SRP code can be overrun an internal buffer. Add sanity check that g, A, B < N to SRP code. (CVE-2014-3512) * A flaw in the OpenSSL SSL/TLS server code causes the server to negotiate TLS 1.0 instead of higher protocol versions when the ClientHello message is badly fragmented. This allows a man-in-the-middle attacker to force a downgrade to TLS 1.0 even if both the server and the client support a higher protocol version, by modifying the client's TLS records. (CVE-2014-3511) * OpenSSL DTLS clients enabling anonymous (EC)DH ciphersuites are subject to a denial of service attack. A malicious server can crash the client with a null pointer dereference (read) by specifying an anonymous (EC)DH ciphersuite and sending carefully crafted handshake messages. (CVE-2014-3510) * By sending carefully crafted DTLS packets an attacker could cause openssl to leak memory. This can be exploited through a Denial of Service attack. (CVE-2014-3507) * An attacker can force openssl to consume large amounts of memory whilst processing DTLS handshake messages. This can be exploited through a Denial of Service attack. (CVE-2014-3506) * An attacker can force an error condition which causes openssl to crash whilst processing DTLS packets due to memory being freed twice. This can be exploited through a Denial of Service attack. (CVE-2014-3505) * If a multithreaded client connects to a malicious server using a resumed session and the server sends an ec point format extension it could write up to 255 bytes to freed memory. (CVE-2014-3509) * A malicious server can crash an OpenSSL client with a null pointer dereference (read) by specifying an SRP ciphersuite even though it was not properly negotiated with the client. This can be exploited through a Denial of Service attack. (CVE-2014-5139) * A flaw in OBJ_obj2txt may cause pretty printing functions such as X509_name_oneline, X509_name_print_ex et al. to leak some information from the stack. Applications may be affected if they echo pretty printing output to the attacker. (CVE-2014-3508) * Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.) for corner cases. (Certain input points at infinity could lead to bogus results, with non-infinity inputs mapped to infinity too.) - refreshed patches: * openssl-1.0.1e-new-fips-reqs.patch * 0005-libssl-Hide-library-private-symbols.patch (thanks to Marcus Meissner) ==== libortp9 ==== Version update (0.22.0 -> 0.23.0) Subpackages: ortp-devel - Update to 0.23.0: * network simulator improvements * updated to use ZRTPCPP>=4.0 * security bugfixes ==== osc ==== Version update (0.146.0 -> 0.147.0) - 0.147 - support groups in maintainership requests - fixing listing of review requests - support expanded package listing (when using project links) - fixing "osc add git://" behaviour - using xz as default compression - support local debian live (image) build format - handle ppc64le for debian as well - fix buildlog --strip-time - some more minor bugfixes ==== gtk3-engine-oxygen ==== Version update (1.3.5 -> 1.4.0) Subpackages: gtk3-theme-oxygen - Update to 1.4.0 * New upstream release, no changelog provided from upstream ==== oxygen-icon-theme ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== pam_ldap ==== Subpackages: pam_ldap-32bit - rename README.SuSE to README.SUSE (bnc#889012) ==== libpango-1_0-0 ==== Version update (1.36.5 -> 1.36.6) Subpackages: libpango-1_0-0-32bit pango-devel pango-tools pango-tools-32bit typelib-1_0-Pango-1_0 - Update to version 1.36.6: + Cope with lack of LC_CTYPE (bgo#732276). + Prevent harfbuzz from using replacement char. + Don't force static builds on win32 (bgo#733137). + Allow backend selection via PANGOCAIRO_BACKEND. + Support more font weights (bgo#733764). + Fix vertical positioning on win32. + Don't break in the middle of jamo (bgo#705727). ==== parley ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== libparted0 ==== Subpackages: parted - Add obsoletes/provides to baselibs.conf. ==== libpci3 ==== Subpackages: pciutils pciutils-devel - Add obsoletes/provides to baselibs.conf. ==== libpcsclite1 ==== Subpackages: pcsc-lite - Add obsoletes/provides to baselibs.conf. ==== perl-Bootloader ==== Version update (0.820 -> 0.821) Subpackages: perl-Bootloader-YAML - support GRUB_ENABLE_CRYPTODISK config option (bnc #887888) - 0.821 ==== perl-Class-Tiny ==== Version update (0.014 -> 1.000) - re-checked license - updated to 1.000 -- upstream changes since last check-in: 1.000 2014-07-16 09:55:29-04:00 America/New_York [*** INCOMPATIBLE CHANGES ***] - Attributes for custom accessors *MUST* be declared for them to be set via the constructor. It is no longer sufficient for a method of the same name to exist. - Unknown constructor arguments are ignored rather than fatal; they are not included in the object. Special instructions for using BUILD to hide constructor arguments from validation are irrelevant and have been removed. - These changes make Class::Tiny-based classes easier to subclass by more advanced object frameworks like Moose or Moo. 0.015 2014-07-13 23:10:47-04:00 America/New_York [CHANGED] - lowered minimum perl to 5.006 ==== perl-DBD-Pg ==== Version update (3.3.0 -> 3.4.1) - Update to version 3.4.1 from 3.4.0 Change from upstream: - Allow '%' again for the type in table_info() and thus tables() It's not documented or tested in DBI, but it used to work until DBD::Pg 3.4.0, and the change broke DBIx::Class::Schema::Loader, which uses type='%'. - update to version 3.4.0 from 3.3.0 Upstream changes: - Cleanup and improve table_info() table_info() type searching now supports TABLE, VIEW, SYSTEM TABLE, SYSTEM VIEW, and LOCAL TEMPORARY table_info() object searching fully supports the above types. table_info() object searching no longer ignores invalid types - a filter of 'NOSUCH' will return no rows, and 'NOSUCH,LOCAL TEMPORARY' will return only temp objects. tableinfo() type filters are strictly matched now ... previously a search for SYSTEM TABLE would have fetched plain TABLE objects. table_info() now treats temporary tables and temporary views as LOCAL TEMPORARY - Make sure column_info() and table_info() can handle materialized views. ==== perl-qt4 ==== Version update (4.13.80 -> 4.14.0) Subpackages: perl-qt4-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Move away from kde4-macros in filelist: perl-qt4 doesn't use kdelibs4 buildsystem - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== pesign-obs-integration ==== - brp-99-compress-vmlinux: Compress the vmlinux image after find-debuginfo (bnc#880848, bnc#884459) ==== apache2-mod_php5 ==== Version update (5.5.15 -> 5.5.16) Subpackages: php5 php5-bcmath php5-bz2 php5-calendar php5-ctype php5-curl php5-dba php5-devel php5-dom php5-exif php5-fastcgi php5-ftp php5-gd php5-gettext php5-gmp php5-iconv php5-imap php5-json php5-ldap php5-mbstring php5-mcrypt php5-mysql php5-odbc php5-openssl php5-pdo php5-pear php5-pgsql php5-shmop php5-snmp php5-sockets php5-sqlite php5-suhosin php5-sysvsem php5-sysvshm php5-tidy php5-tokenizer php5-wddx php5-xmlreader php5-xmlwriter php5-xsl php5-zip php5-zlib - This release fixes several bugs against PHP 5.5.15 and resolves CVE-2014-3538, CVE-2014-3587, CVE-2014-2497, CVE-2014-5120 and CVE-2014-3597. - removed patches: * php-CVE-2014-2497.patch ==== libpurple-branding-openSUSE ==== Version update (13.1 -> 13.2) - Bump version to 13.2, to prepare for next version of openSUSE. ==== plasma-addons ==== Version update (4.13.80 -> 4.14.0) Subpackages: plasma-addons-akonadi plasma-addons-lancelot plasma-addons-marble - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== kde4-l10n-devel ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ppp ==== Version update (2.4.6 -> 2.4.7) - Update to 2.4.7: * Fixed a potential security issue in parsing option files (CVE-2014-3158, bnc#891489). * There is a new "stop-bits" option, which takes an argument of 1 or 2, indicating the number of stop bits to use for async serial ports. * Various bug fixes. ==== privoxy ==== - added config file for SuSEfirewall2 ==== python-kde4 ==== Version update (4.13.80 -> 4.14.0) Subpackages: python-kde4-akonadi python-kde4-devel python-kde4-khtml python-kde4-knewstuff python-kde4-phonon python-kde4-plasma - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Drop patch python-sip-4.15.5.fixes.diff due to upstream inclusion - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== python-pymongo ==== Version update (2.7.1 -> 2.7.2) - Update to version 2.7.2 * Insert _id in document after applying non-copying SONManipulators (https://jira.mongodb.org/browse/PYTHON-709) * Fix exhaust cursor error-handling (https://jira.mongodb.org/browse/PYTHON-736) * Handle network errors when adding existing credentials to sockets (https://jira.mongodb.org/browse/PYTHON-732) * ObjectId.is_valid(None) should be False (https://jira.mongodb.org/browse/PYTHON-712) * Clarify versionchanged line for bulk insert (https://jira.mongodb.org/browse/PYTHON-738) * Work around localhost exception issues in add_user when connected to MongoDB >= 2.7.1 (https://jira.mongodb.org/browse/PYTHON-714) * Fix Bulk API legacy upsert _id compatibility (https://jira.mongodb.org/browse/PYTHON-705) * SON.to_dict shouldn't change original data (https://jira.mongodb.org/browse/PYTHON-710) ==== python-six ==== Version update (1.7.2 -> 1.7.3) - update to 1.7.3: - Issue #77: Fix import six on Python 3.4 with a custom loader. - Issue #74: six.moves.xmlrpc_server should map to SimpleXMLRPCServer on Python 2 as documented not xmlrpclib. ==== rsyslog ==== Version update (8.2.2 -> 8.4.0) - reenable gssapi module - rsyslog 8.4.0 [v8-stable] - this is the new stable branch, which incorporates all enhancements of rsyslog 8.3. - rsyslog 8.3.5 [v8-devel] 2014-08-05 - mmjsonparse: support selectable cookie and target containers This permits to put different meanings into a json formatted syslog message, e.g. the "traditional" cee or cim data. - bugfix: mmjsonparse did not build with json-c < 0.10 This was a regression introduced some time in the past in order to support API changes in json-c. Now we check for the - rsyslog and use proper code. - omprog: emit error message via syslog() if loading binary fails This happens after forking, so omprog has no longer access to rsyslog's regular error reporting functions. Previously, this meant any error message was lost. Now it is emitted via regular syslog (which may end up in a different instance, if multiple instances run...) - couple of patches imported from v7-stable (7.6.4) - rsyslog 8.3.4 [v8-devel] 2014-07-11 - new pmciscoios parser supporting various Cisco IOS formats - RFC3164 timestamp parser now accepts timezones and subsecond resolution ... at least for some common formats and where we could do so without running risk of breaking proper formats (or introducing regressions) - new parser config object -- permits to define custom parser definitions - new tzinfo config object -- permits to define time zone offsets This is a utility object that currently is being used by some parsers. - bugfix: mishandling of input modules not supporting new input instances If they did not support this, accidently the output module part of the module union was written, leading to unpredictable results. Note: all core modules do support this interface, but some contributed or very old ones do not. - bugfix: double-free when ruleset() parser parameters were used While unlikely, this could cause stability issues even after the config phase. - rsyslog 8.3.3 [v8-devel] 2014-06-26 - unify input object naming imudp now supports "name" paramter, as other inputs do. "inputname" has been deprecated, but can still be used. Same applies to "appendport" subparamter". Thanks to "Nick Syslog" for the suggestion. - made the missing (contributed) modules build under v8 [import from 8.2.2] Modules: * mmrfc5424addhmac omrabbitmq omgssapi omhdfs omzmq3 - added a cleanup process (janitor); permits to close omfile files after a timeout - make omgssapi build under v8.3 [import vom v8.2] note that we could do this to the stable, because there is NO regression chance at all: only omgssapi was changed, and this module did NOT work previously. - removed obsolete --disable-fsstnd configure option Thanks to Thomas D. for alerting us. Closes: https://github.com/rsyslog/rsyslog/issues/72 - rsyslog 8.3.2 [v8-devel] 2014-05-02 - new template options for date extraction: - year - month - day - wday - hour - minute - second - tzoffshour - tzoffsmin - tzoffsdirection - wdayname For string templates, these are property options and they are prefixed with "date-" (e.g. "date-year", "date-month", ...) see also: https://github.com/rsyslog/rsyslog/issues/65 - bugfix: mmexternal remove framing char before processing JSON reply This did not have any real bad effects, but caused unnecessary processing, as empty replies were not properly detected. Otherwise, the bug was not noticible from the user's PoV. - bugfix: mmexternal segfault due to invalid free in non-json input mode closes: https://github.com/rsyslog/rsyslog/issues/70 - bugfix: mmexternal segfault when external plugin sent invalid reply ... or no reply at all. This happened if the reply was imporper JSON. Now, we emit an error message in those cases. see also: https://github.com/rsyslog/rsyslog/issues/69 - bugfix: mmexternal did potentially pass incomplete data to restarted external plugin This could happen if EPIPE was returned "too late", in which case the beginning of the data could be lost. - bugfix: mmexternal did not properly process messages over 4KiB The data to be passed to the external plugin was truncated after 4KiB. see: https://github.com/rsyslog/rsyslog/issues/64 - imrelp: added support for per-listener ruleset and inputname see: https://github.com/rsyslog/rsyslog/pull/63 Thanks to bobthesecurityguy github user for the patch - rsyslog 8.3.1 [v8-devel] 2014-04-24 - external message modification interface now support modifying message PRI - "jsonmesg" property will include uuid only if one was previously generated This is primarily a performance optimization. Whenever the message uuid is gotten, it is generated when not already present. As we used the regular setter, this means that always the uuid was generated, which is quite time-consuming. This has now been changed so that it only is generated if it already exists. That also matches more closly the semantics, as "jsonmesg" should not make modifications to the message. Note that the same applies to "fulljson" passing mode for external plugins. - added plugin to rewrite message facility and/or severity Name: fac-sever-rewrite.py - permits to build against json-c 0.12 Unfortunately, json-c had an ABI breakage, so this is necessary. Note that - rsyslogs prior to 0.12 had security issues (CVE-2013-6370, CVE-2013-6371) and so it is desirable to link against the new - rsyslog. Thanks to Thomas D. for the patch. Note that at least some distros have fixed the security issue in older - rsyslogs of json-c, so this seems to apply mostly when building from sources. - bugfix: using UUID property could cause segfault - bugfix/mmexternal: memory leak - bugfix: memory leak when using "jsonmesg" property - bugfix: mmutf8fix did not detect two invalid sequences Thanks to Axel Rau for the patch. - bugfix: build problems with lexer.l on some platforms For some reason, the strdup() prototype and others are missing. I admit that I don't know why, as this happens only in 8.3.0+ and there is no indication of changes to the affected files. In any case, we need to fix this, and the current solution works at least as an interim one. - rsyslog 8.3.0 [v8-devel] 2014-04-10 - new plugin for anonymizing credit card numbers Thanks to Peter Slavov for providing the code. - external message modification modules are now supported They are bound via the new native module "mmexternal". Also, a sample skeleton for an external python message modification module has been added. - new $jsonmesg property with JSON representation of whole message object closes: https://github.com/rsyslog/rsyslog/issues/19 - improved error message for invalid field extraction in string template see also: http://kb.monitorware.com/problem-with-field-based-extraction-t12299.html - fix build problems on Solaris - NOTE: a json-c API that we begun to use requires the compiler to be in c99 mode. By default, we select it automatically. If you modify this and use gcc, be sure to include "-std=c99" in your compiler flags. This seems to be necessary only for older - rsyslogs of gcc. - rsyslog 8.2.3 [v8-stable] 2014-??-?? - bugfix: ommysql: handle/mem leak upon termination of worker thread This could become bad if the (instance) worker threads are often started and terminated. But it takes quite a while to show effect. - added documentation tarball and also install the html documentation new subpackage rsyslog-doc - drop rsyslog-pid-file.patch: patch is included in update - added rsyslog-8.4.0_implicit_declaration.patch: include sys/time.h for gettimeofday ==== ruby-kde4 ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== ruby-qt4 ==== Version update (4.13.80 -> 4.14.0) Subpackages: ruby-qt4-devel - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== shim ==== - Add shim-update-openssl-0.9.8zb.patch to update openssl to 0.9.8zb ==== libsss_idmap0 ==== Subpackages: libsss_nss_idmap0 sssd sssd-32bit sssd-krb5-common sssd-ldap - The utility sss_obfuscate uses the Python module pysss, so add a dependency on python-sssd-config to sssd-tools (bnc#890242) ==== step ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== sweeper ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== klogd ==== Subpackages: syslog-service - Add syslogd-rpmlintrc to sourcelist to shut up stupid factory auto - Stop syslog.socket in %preun to avoid the daemon we uninstall gets started by a log message due to dependencies (bnc#840815). ==== libgudev-1_0-0 ==== Subpackages: libgudev-1_0-devel libudev-devel libudev1 libudev1-32bit systemd systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit typelib-1_0-GUdev-1_0 udev - Add upstream patches for hwdb 0001-hwdb-keymaps-for-Samsung-900X3E-900X3F.patch 0002-Add-hwdb-entry-for-Samsung-Series-7-Ultra.patch 0003-keymap-Fix-HP-Pavillon-DV7.patch 0004-hwdb-update-format-description-and-document-reloadin.patch 0008-hwdb-update.patch - Port back and add the missed upstream patches from 2014/08/22 0004-login-set_controller-should-fail-if-prepare_vt-fails.patch 0006-login-share-VT-signal-handler-between-sessions.patch - Add upstream patches 0001-nspawn-fix-truncation-of-machine-names-in-interface-.patch 0002-switch-root-umount-the-old-root-correctly.patch 0003-bootchart-it-s-not-OK-to-return-1-from-a-main-progra.patch 0005-sd-resolve-fix-allocation-if-query-ids-never-reuse-t.patch 0007-journald-also-increase-the-SendBuffer-of-dev-log-to-.patch 0008-mount-setup-fix-counting-of-early-mounts-without-SMA.patch 0009-journald-Fix-off-by-one-error-in-Missed-X-kernel-mes.patch 0010-machine_kill-Don-t-kill-the-unit-when-killing-the-le.patch 0011-units-fix-BindsTo-logic-when-applied-relative-to-ser.patch 0012-util-try-to-be-a-bit-more-NFS-compatible-when-checki.patch 1063-udev-path_id-suppress-ID_PATH-for-devices-with-an-un.patch - man pages from section 3 are developer docs, move them to the -devel package. - Add patch 0001-let-systemctl-completion-ignore-at-names.patch to remove error messages for tab completion for systemctl isolate (bnc#892162) - Disable the usage of the systemd groups wheel and adm (bnc#892300) ==== sysvinit-tools ==== - use systemd-rpm-macros instead of systemd-devel to avoid build dependency on systemd and it's deps in turn - don't install mkinitrd stuff on > 131 anymore - The former entry adds the patch killproc-2.18-open_flags.dif (bnc#863518) - open("/dev/tty", ...) should use O_RDWR, not O_WRONLY. Otherwise, after dup2(fd, 0);, a process cannot read from stdin. [bnc#863518] ==== libwrap0 ==== Subpackages: libwrap0-32bit tcpd-devel - Add obsoletes/provides to baselibs.conf ==== tcpdump ==== Version update (4.5.1 -> 4.6.1) - tcpdump 4.6.1: * add a short option '#', same as long option '--number' - includes changes from 4.6.0: * all of tcpdump is now using the new "NDO" code base * nflog, mobile, forces, pptp, AODV, AHCP, IPv6, OSPFv4, RPL, DHCPv6 enhancements/fixes * M3UA decode added. * many new test cases: 82 in 4.5.1 to 133 in 4.6.0 * cleaned up some unnecessary header files * Added bittok2str(). * a number of unaligned access faults fixed * -A flag does not consider CR to be printable anymore * fx.lebail took over coverity baby sitting * default snapshot size increased to 256K for accomodate USB captures - includes changes from 4.5.2: * man page fix - add build and runtime libpcap minimum version - remove old patches, thus making package patchless: tcpdump-4.0.0-prototypes.patch tcpdump-4.0.0-aliasing.patch - run spec cleaner on spec file - remove gpg-offline, now part of source validator - remove versioned binary - run regression tests ==== libtelepathy-qt4-2 ==== - Enable farstream package for Factory/13.2 (and build with gst1.0 API) ==== tigervnc ==== Subpackages: xorg-x11-Xvnc - u_tigervnc-check-shm-harder.patch * Check if SHM really works before deciding to use it. (bnc#890580) ==== umbrello ==== Version update (4.13.80 -> 4.14.0) - Update to 4.14.0 * KDE 4.14.0 SC Final Release * See http://www.kde.org/announcements/4.13/ - Update to 4.13.90 * KDE 4.14 Beta 2 release * See http://www.kde.org/announcements/announce-4.14-beta2.php ==== typelib-1_0-UpowerGlib-1_0 ==== Version update (0.99.0 -> 0.99.1) Subpackages: upower - Update to version 0.99.1: + New Features: - Remove IsDocked property - Remove unused polkit dependency + Bugfixes: - Create the history directory at runtime - Do not log a critical warning when using _set_object_path_sync() - Fix API doc for up_client_get_on_battery() - Fix possible UpHistoryItem leak on failure - Fix segfault on getting property when daemon is not running - Fix shutdown on boot on some machines - Fix small memleak on startup with Logitech devices - Free the obtained device list array after use - Update lid status when updating AC status - Remove upower-fix-leaks.patch: fixed upstream. - Adjust package name, since LT_CURRENT is now 3 ==== libblkid-devel ==== Version update (2.24.2 -> 2.25) Subpackages: libblkid1 libblkid1-32bit libmount1 libmount1-32bit libuuid-devel libuuid1 libuuid1-32bit util-linux - Update to version 2.25 (using work of Ruediger Meier <sweet_f_a(a)gmx.de>): * based on the git master branch of util-linux * many fixes (including bnc#869355, bnc#871951 and bnc#871698#c49) * new Python binding sub-package for libmount: python-libmount * new library: libsmartcols * new commands: lslogins, setpriv * add fstrim systemd timer * better systemd integration * DROPPED command: * cytune: Upstream decided to remove tool untested for years that supports this old hardware. - Dropped patches included in the upstream: (*git) Included with no changes (+git) Included with improvements (!git) Included with differences * support-other-tty-lines-not-vconsole.patch (*b9c7390) * agetty-fooled-on-serial-line-due-plymouth.patch, * sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7) * agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5) * sulogin-does-not-find-any-console.patch (*624b204) * util-linux-setarch-uname26.patch (*f6eb160) * util-linux-ng-2.16-squashfs3-detect.patch (*11402f5) * util-linux-lscpu-improve-hypervisor-detection.patch (!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475) WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports hypervisor, as it breaks standard behavior. Use standard output instead! (FATE#310255) * blkid-stop-scanning-on-I-O-error.patch (+296d96e) * blkid-convert-superblocks-to-new-calling-convention.patch (+37f4060) * util-linux-libblkid-ext-probe.patch (*a1ca32f) * util-linux-hwclock-drift-check.patch (*f196fd1) * util-linux-hwclock-adjtime-check.patch (*db8fc5f) - Dropped obsolete patch: * util-linux-2.23.1-eject-fpie.patch (eject is no more SUID) * util-linux-2.24-fdisk_remove_bogus_warnings.patch (upstream fixed it in a different way) * util-linux-HACK-boot.localfs.diff (MOUNT_PRINT_SOURCE is no more referenced) - Ported and renamed: * util-linux-2.23.1-noenc-suse.diff - > util-linux-noenc-suse.patch - Split spec file to three stages: * util-linux.spec: Everything that do not need python or systemd. * util-linux-systemd.spec: Stuff that needs systemd: util-linux-systemd and uuidd NOTE: Not building systemd-less variants of utilities. * python-libmount.spec: Just python-libmount - Move bash-completion files to correct packages. - Add patch util-linux-bash-completion-blockdev.patch. - Add hacks to prevent damaging of spec files by format_spec_file (bnc#891152, also edited util-linux-rpmlintrc). ==== libwicked-0-6 ==== Version update (0.6.1 -> 0.6.2) Subpackages: wicked wicked-service - version 0.6.2 - nanny: disable nanny use by default again (bnc#891045) - fsm: generate default configs for ports/slaves (bnc#889666) - dbus: increase signal/default call timeouts (bnc#890084) - dhcp4: pad dhcp4 packet to correct minimal len (bnc#882561) - dhcp4: apply interface MTU provided by server (bnc#890230) ==== wine ==== Version update (1.7.24 -> 1.7.25) Subpackages: wine-32bit - Updated to 1.7.25 development snapshot - Implementation of the packet capture library. - A few more DirectWrite functions. - Improvements in HTML table support. - More VBScript math functions. - Various bug fixes. - buildrequire libpcap-devel for wpcap.dll ==== wpa_supplicant ==== Subpackages: wpa_supplicant-gui - fix dbus systemd activation (bnc#892683) ==== x11-tools ==== - Improve GNOME detection for Classic mode. ==== xen ==== Version update (4.4.0_26 -> 4.4.1_02) Subpackages: xen-doc-html xen-kmp-default xen-kmp-desktop xen-libs xen-tools xen-tools-domU - Update README.SUSE with additional debug help - bnc#883112 - Xen Panic during boot "System without CMOS RTC must be booted from EFI" 53dba447-x86-ACPI-allow-CMOS-RTC-use-even-when-ACPI-says-there-is-none.patch - Upstream patches from Jan 53d7b781-x86-cpu-undo-BIOS-CPUID-max_leaf-limit-earlier.patch 53df71c7-lz4-check-for-underruns.patch 53df727b-x86-HVM-extend-LAPIC-shortcuts-around-P2M-lookups.patch 53e47d6b-x86_emulate-properly-do-IP-updates-and-other-side-effects.patch - Update to Xen Version 4.4.1-rc2 xen-4.4.1-testing-src.tar.bz2 - Dropped the following upstream patches and xen-4.4.0-testing-src.tar.bz2 537b5ede-move-domain-to-cpupool0-before-destroying-it.patch 5327190a-x86-Intel-work-around-Xeon-7400-series-erratum-AAI65.patch 534bdf47-x86-HAP-also-flush-TLB-when-altering-a-present-1G-or-intermediate-entry.patch 535a354b-passthrough-allow-to-suppress-SERR-and-PERR-signaling.patch 53636ebf-x86-fix-guest-CPUID-handling.patch 5347b524-evtchn-eliminate-64k-ports-limitation.patch 53a040c6-page-alloc-scrub-pages-used-by-hypervisor-upon-freeing.patch 53a1990a-IOMMU-prevent-VT-d-device-IOTLB-operations-on-wrong-IOMMU.patch 53732f4f-x86-MCE-bypass-uninitialized-vcpu-in-vMCE-injection.patch 531dc0e2-xmalloc-handle-correctly-page-allocation-when-align-size.patch 5331917d-x86-enforce-preemption-in-HVM_set_mem_access-p2m_set_mem_access.patch 531d8e09-x86-HVM-fix-memory-type-merging-in-epte_get_entry_emt.patch 538ee637-ACPI-Prevent-acpi_table_entries-from-falling-into-a-infinite-loop.patch 535a34eb-VT-d-suppress-UR-signaling-for-server-chipsets.patch 535e31bc-x86-HVM-correct-the-SMEP-logic-for-HVM_CR0_GUEST_RESERVED_BITS.patch 53859956-timers-set-the-deadline-more-accurately.patch 53636978-hvm_set_ioreq_page-releases-wrong-page-in-error-path.patch 535a3516-VT-d-suppress-UR-signaling-for-desktop-chipsets.patch 53cfdcc7-avoid-crash-when-doing-shutdown-with-active-cpupools.patch 5383175e-VT-d-fix-mask-applied-to-DMIBAR-in-desktop-chipset-XSA-59-workaround.patch 531d8e34-x86-HVM-consolidate-passthrough-handling-in-epte_get_entry_emt.patch 532fff53-x86-fix-determination-of-bit-count-for-struct-domain-allocations.patch 5357baff-x86-add-missing-break-in-dom0_pit_access.patch 530c54c3-x86-mce-Reduce-boot-time-logspam.patch 5383167d-ACPI-ERST-fix-table-mapping.patch 5390927f-x86-fix-reboot-shutdown-with-running-HVM-guests.patch 530b27fd-x86-MCE-Fix-race-condition-in-mctelem_reserve.patch 53709b77-Nested-VMX-load-current_vmcs-only-when-it-exists.patch 5396d818-avoid-crash-on-HVM-domain-destroy-with-PCI-passthrough.patch 531d8fd0-kexec-identify-which-cpu-the-kexec-image-is-being-executed-on.patch 5385956b-x86-don-t-use-VA-for-cache-flush-when-also-flushing-TLB.patch 539ec004-x86-mce-don-t-spam-the-console-with-CPUx-Temperature-z.patch 53909259-x86-domctl-two-functional-fixes-to-XEN_DOMCTL_-gs-etvcpuextstate.patch 53859549-AMD-IOMMU-don-t-free-page-table-prematurely.patch 533d413b-x86-mm-fix-checks-against-max_mapped_pfn.patch 535fa503-x86-HVM-restrict-HVMOP_set_mem_type.patch 53271880-VT-d-fix-RMRR-handling.patch 5390917a-VT-d-honor-APEI-firmware-first-mode-in-XSA-59-workaround-code.patch 538dcada-x86-HVM-eliminate-vulnerabilities-from-hvm_inject_msi.patch 53455585-x86-AMD-feature-masking-is-unavailable-on-Fam11.patch 537b5e50-VT-d-apply-quirks-at-device-setup-time-rather-than-only-at-boot.patch 53a199d7-x86-EFI-allow-FPU-XMM-use-in-runtime-service-functions.patch 53cfddaf-x86-mem_event-validate-the-response-vcpu_id-before-acting-on-it.patch 53b16cd4-VT-d-ATS-correct-and-clean-up-dev_invalidate_iotlb.patch 53cfdde4-x86-mem_event-prevent-underflow-of-vcpu-pause-counts.patch 53356c1e-x86-HVM-correct-CPUID-leaf-80000008-handling.patch 534bbd90-x86-nested-HAP-don-t-BUG-on-legitimate-error.patch 530b28c5-x86-MSI-don-t-risk-division-by-zero.patch 5396e805-x86-HVM-refine-SMEP-test-in-HVM_CR4_GUEST_RESERVED_BITS.patch 5370e03b-pygrub-fix-error-handling-if-no-valid-partitions-are-found.patch 5321b257-x86-make-hypercall-preemption-checks-consistent.patch 5321b20b-common-make-hypercall-preemption-checks-consistent.patch 538c338f-x86-amd_ucode-flip-revision-numbers-in-printk.patch 537b5e79-VT-d-extend-error-report-masking-workaround-to-newer-chipsets.patch 531d8db1-x86-hvm-refine-the-judgment-on-IDENT_PT-for-EMT.patch 53b56de1-properly-reference-count-DOMCTL_-un-pausedomain-hypercalls.patch 530b2880-Nested-VMX-update-nested-paging-mode-on-vmexit.patch 533ad1ee-VMX-fix-PAT-value-seen-by-guest.patch 53206661-pygrub-support-linux16-and-initrd16.patch 5315a254-IOMMU-generalize-and-correct-softirq-processing.patch - bnc#820873 - The "long" option doesn't work with "xl list" 53d124e7-fix-list_domain_details-check-config-data-length-0.patch - bnc#888996 - Package 'xen-tool' contains 'SuSE' spelling in a filename and/or SPEC file Renamed README.SuSE -> README.SUSE Modified files: xen.spec, boot.local.xenU, init.pciback xend-config.patch, xend-vif-route-ifup.patch - bnc#882673 - Dom0 memory should enforce a minimum memory size (e.g. dom0_mem=min:512M) xen.spec (Mike Latimer) ==== libexo-1-0-branding-openSUSE ==== Subpackages: libgarcon-branding-openSUSE libxfce4ui-branding-openSUSE midori-branding-openSUSE openSUSE-xfce-icon-theme thunar-volman-branding-openSUSE xfce4-notifyd-branding-openSUSE xfce4-panel-branding-openSUSE xfce4-power-manager-branding-openSUSE xfce4-session-branding-openSUSE xfce4-settings-branding-openSUSE xfdesktop-branding-openSUSE xfwm4-branding-openSUSE - xfce4-panel-plugin-xfce4battery was renamed to power-manager-plugin ==== xfce4-power-manager ==== Version update (1.3.1 -> 1.3.2) Subpackages: xfce4-power-manager-lang - disable lxpanel-plugin-power-manager which does not build due to API changes lxpanel >= 0.7.0 (bxo#11108) - update to latest development version 1.3.2 - renamed panel plugin from "Battery Indicator Plugin" to "Power Manager Plugin" which is more fitting as it doesn't merely show the battery status - xfce4-power-manager does not rely on special device icons anymore for the load status which is now drawn on the standard icons - fix crash with slider on 32bit systems (Bug #11076) - fix version number output on the commandline - remove unused code - add dedicated icons for the keyboard brightness notifications - various icon improvements - reorder parts of the settings dialog - translation updates - renamed subpackage xfce4-panel-plugin-xfce4battery to xfce4-panel-plugin-power-manager and lxpanel-plugin-lxdebattery to lxpanel-plugin-power-manager following upstream ==== xfce4-settings ==== Subpackages: xfce4-settings-lang - add xfce4-settings-fork-before-gtk-dbus-init.patch in order to fix problems due to forking after gtk/dbus init (bxo#11045) ==== xfs ==== Version update (1.1.3 -> 1.1.4) - xfs 1.1.4 * This release improves compatibility with libXfont 1.5 and cleans up many compiler warnings and chunks of dead code. * supersedes U_Only-call-SnfSetFormat-if-libXfont-is-built-with-SNF.patch ==== xorg-x11-server ==== Subpackages: xorg-x11-server-extra xorg-x11-server-sdk - A better fix for 24bpp graphics problem with cirrus KMS (bnc#890599); Adding a new patch: U_fb-Fix-invalid-bpp-for-24bit-depth-window.patch while obsoleting two patches: u_render-Don-t-generate-invalid-pixman-format-when-using-a-24bpp-framebuffer-with-a-32bit-depth-visual.patch u_fb-Correctly-implement-CopyArea-when-using-a-window-with-depth-32-and-24bpp.patch - no longer add /usr/lib[64]/xorg/modules/updates to module path (FATE#317822) ==== xterm ==== - fix SUSE naming in the package files (bnc#888995) ==== yast2 ==== Version update (3.1.95 -> 3.1.101) Subpackages: yast2-devel-doc - Fixed checking whether SuSEfirewall2 package is selected or installed - in inst_finish, the package is already installed (bnc#892935) - 3.1.101 - Fixed RPM description (bnc#888994) - 3.1.100 - Untrusted repositories are disabled during installation to avoid asking for the key import over and over during the installation. - Fixed bnc#723019 and bnc#886572 - 3.1.99 - Package.rb: Each call is polling which installation mode is active currently. So Mode.rb has not to take care about modules which are using Mode.rb. (Fixing current testcases) - 3.1.98 - Fixed checking for SuSEfirewall2 package installed/selected for installation depending on the current stage/mode (bnc#887406) - 3.1.97 - When changing installation mode in "Mode.rb" the mode in Package.rb has to be updated too. (bnc#888212) - 3.1.96 ==== yast2-bootloader ==== Version update (3.1.87 -> 3.1.89) - remove nonsense check (bnc #768538) - 3.1.89 - read properly secure boot status when used from other modules like yast2-vm, so it adds new entry as secure boot (bnc#892032) - 3.1.88 ==== yast2-core ==== Version update (3.1.9 -> 3.1.10) Subpackages: yast2-core-devel - Fixed another batch of compilation warnings. - 3.1.10 ==== yast2-country ==== Version update (3.1.10 -> 3.1.11) Subpackages: yast2-country-data - Persisted X11 keyboard configuration using localectl (bnc#892303) - 3.1.11 ==== yast2-ftp-server ==== Version update (3.1.2 -> 3.1.4) - Autoyast configuration mode: Set installation mode to "normal" before writing the settings. So the target system has to be set at first. (bnc#888212) - 3.1.4 - Using different defaults about logging for vsftpd/pure-ftpd (bnc#888287) - Setting xferlog_enable = YES instead of syslog_enable - 3.1.3 ==== yast2-inetd ==== Version update (3.1.5 -> 3.1.6) - Fixed adjusting the xinetd service status (bnc#886420) - 3.1.6 ==== yast2-installation ==== Version update (3.1.108 -> 3.1.109) - workaround problem with missing capabilities in image deployment (bnc#889489) - 3.1.109 ==== yast2-iscsi-client ==== Version update (3.1.14 -> 3.1.15) - Updating the node DB while using authentication (bnc#889967 comment#10) - 3.1.15 ==== yast2-network ==== Version update (3.1.76 -> 3.1.84) - copy wickedd-nanny status (in /etc/wicked/common.xml) to target - 3.1.84 - bnc#887238 - Layer2 availability option is referenced correctly during autoconfiguration - 3.1.83 - fixed typo in module name (bnc#891921) - 3.1.82 - bnc#841170, fate#316090 - support for filtering broadcoms storage only devices out of device list - 3.1.81 - properly convert proxy configuration from install.inf during installation (bnc#885957) - 3.1.80 - Fixed network_autoconfiguration_test stubbing on s390 (bnc#883836). - 3.1.79 - Reading and adjusting the SuSEfirewall2 configuration has been moved from inst_finish to inst_proposal because AutoYast export can be already requested in inst_proposal (bnc#887406) - 3.1.78 - Do not lose default route when editing an interface (bnc#883836). - 3.1.77 ==== yast2-ntp-client ==== Version update (3.1.9 -> 3.1.10) - Autoyast cloning: Do not show error popup if ntp server has not installed. (bnc#891422) - 3.1.10 ==== yast2-packager ==== Version update (3.1.39 -> 3.1.42) - fixed adding of new SLP and CD/DVD repositories - added "Repositories from Registration Server" option to URL selection dialog (displyed when adding a new repository) (bnc#888566) - 3.1.42 - better help text: user can confirm product removal and continue with the product upgrade (bnc#889749) - 3.1.41 - Removed caching of already accepted licenses: if there is a license that needs to be accepted, user has to accept it (bnc#890968) - 3.1.40 ==== yast2-pkg-bindings ==== Version update (3.1.15 -> 3.1.17) - explicitly include <ostream> to avoid possible compile failures (bnc#891676) - 3.1.17 - fixed passing an invalid repository ID in GPG key import callback (bnc#891389) - 3.1.16 ==== yast2-services-manager ==== Version update (3.1.28 -> 3.1.30) - Autoyast: Moved minimal configuration to a central place in inst_finish. (bnc#886464) - 3.1.30 - Targets marked for translations, adjusting UI in a way that even longer targets (translations) fit into it (bnc#892366) - 3.1.29 ==== yast2-users ==== Version update (3.1.29 -> 3.1.30) - Fixed handling of the [Abort] button in inst_user_first, user is asked for confirmation (bnc#886662) - Fixed UsersSimple.Transliterate not to return a trailing newline - 3.1.30 ==== yast2-vm ==== Version update (3.1.17 -> 3.1.18) - bnc#892759 - "Install Hypervisor and Tools" fails with error: Details: undefined method `+' for nil:NilClass - 3.1.18 ==== zoo ==== - Remove redundant %clean section and old specfile tags; reset Release number as it is autocontrolled by OBS anyhow. Removed packages: libOpenColorIO1 libdleyna-core-1_0-1 libnl-1_1-devel > libnl1 libreoffice-icon-theme-crystal libtinyxml0 libupower-glib2 xfce4-panel-plugin-xfce4battery Added packages: bundle-lang-common-ar libdleyna-core-1_0-3 google-carlito-fonts java-1_8_0-openjdk > java-1_8_0-openjdk-headless java-1_8_0-openjdk-plugin kate-python-plugins libnl3-200-32bit libpcap1-32bit libupnp6 perl-Linux-Pid python-Jinja2 python-MarkupSafe python-docopt python-jedi python-ply python-pyplete python-pysmell libupower-glib3 libsmartcols1 util-linux-systemd xfce4-panel-plugin-power-manager -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 8