August 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Trouble with iSCSI over LVM and EXT4 mounted drive
by ub22 09 Aug '13

09 Aug '13

I use a Netgear ReadyNAS 102 with actual FW-version 6.0.8 as iSCSI LUN. So with older Tumbleweed System/Kernels (daily updated) it works fine with to HDDs LUNs via iSCSI mounted to one LVM device formated with EXT4 as Backup destination. Since some weeks - I've some trouble with this drive. After a rsync or delete of a subrtee, it was remounted as read only. I've searched a while about possible reasons, but can't find it. I've also tested some different settings in the /etc/iscsi/iscsid.conf but no effect. Same error as anyone. All my LOGs and Settings you can find as ziped appendix on this mail. Ub22

1 0

[opensuse-factory] automount feature?
by Linda Walsh 09 Aug '13

09 Aug '13

I would, at least, like my automounter to handle paths in //<host> and to try them first as CIFS paths. Does the automounter support fallback on failures? like if there was no CIFS host at //server, but there was an NFS host, could it fall back to NFS if CIFS was not found? But primarily and up-front -- how can I have '//' be a lookup for network file systems? (it is my understanding that POSIX requires that //pathname is not presumed to be identical to /pathname, even though ///pathname can be (multiple slashes are usually collapsible, with the exception of double slashes at the beginning of the path. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 13

[opensuse-factory] mount error(13): Permission denied
by Felix Miata 09 Aug '13

09 Aug '13

This is from mount <mountpoint> on 13.1m3. The mountpoint and fstab entries are identical and working in 12.3 on same system. I just spent more than two hours on IRC trying to figure this out before thinking to try booting something other than 13.1. :-( -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] openSUSE 13.1 MS3 suse_version = 1230
by Ulf 09 Aug '13

09 Aug '13

Hello, the value of rpm macro %{suse_version} is 1230, it should be something greater than 1230 (see http://en.opensuse.org/openSUSE:Build_Service_cross_distribution_howto#Dete…) Can somebody please fix it? Regards, Ulf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Is Dracut being implemented into Milestone 4?
by Roman Bysh 08 Aug '13

08 Aug '13

Hello Listmates, Are we going to see _dracut_ in Milestone 4? -- Cheers! Roman ------------------------------------------------------- openSUSE -- Get it! Discover it! Share it! ------------------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

[opensuse-factory] On kmod-compat replacing m-i-t
by Jan Engelhardt 08 Aug '13

08 Aug '13

Currently, the only package that still blocks the removal of module-init-tools from a system is the kernel rpm package, with an express dependency "module-init-tools >= 3.4". What is so particular about m-i-t 3.4? Can it be replaced by modutils, or do we need to add some virtual Provides: mitmagic34 to both module-init-tools.spec and kmod-compat.spec? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 8

[opensuse-factory] Removed rebuild counter sync
by Stephan Kulow 08 Aug '13

08 Aug '13

Hi, Our product builder seems to be overly stressed these days - just yesterday I waited the whole day to get a DVD for testing ;( So I now removed the counter sync from the factory media, which means you will only see a new medium if its content changed and Milestone4 will only be "random" numbers and not a single counter. Once we have solved the product builder issue (not yet sure what it is though) we can reenable it, but that will most likely be in september. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] Fate 315090 > Upgrade to Bluez 5
by Jeffrey Cheung 08 Aug '13

08 Aug '13

>>> 在 09:51 下午的 8/7/2013 的訊息 <520313B1.709 : 29 : 34569> 中，Stefan Seyfried <stefan.seyfried(a)googlemail.com> 寫入：> Am 07.08.2013 11:15, schrieb Jeffrey Cheung: >> Hi all, >> >> Due to unware of openSUSE 13.1 development schedule, I got a sincere >> reminder from Ludwig Nussel that we already past the feature freeze >> with Milestone 4 now. > > I also tried updating and created home:seife:bluez5 staging project to > find out what will break. > However, I got distracted and have not worked on it for quite some time. > > What problems did you hit? > Did you fix all dependent packages? > Or did you just "--enable-library" to keep the compatibility code in bluez? > > My RD sick today and I will ask him tomorrow. > > > Did you also set up a staging project? Where is it so that I can check > for the differences? > I will check with him as well. > >> So far, my RD already finished the work on x86-64 part but the i586 >> still work on progress. I wonder if this fate is allowed to proceed >> on openSUSE 13.1 development. > > personally, I think it is much too late to do this change with the > complete API change. > > AFAIK no other distribution has switched to bluez5, so there will be > lots of work to do in fixing all packages... > Yes, thanks of info. It seems a bit late now. regards, Jeffrey > > Best regards, > > Stefan > -- > Stefan Seyfried > Linux Consultant & Developer -- GPG Key: 0x731B665B > > B1 Systems GmbH > Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de > GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537 > -- > To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Gstreamer 0.10
by Raymond Wooninck 07 Aug '13

07 Aug '13

Hi Listmates, I know that one of the intentions for openSUSE 13.1 was to get ride of the old version of gstreamer (0.10) and to have only the lastest gstreamer (1.0). At the start of the factory development cycle, this looked ok as that a number of KDE projects started the port to Gstreamer 1.0 as well. The current status is however that neither KDE and Qt are fully supporting GStreamer 1.0 and still require the old GStreamer 0.10 version. Even the latest Qt 5.1 still requires GStreamer 0.10 for it's multimedia library. Also from a KDE perspective the Phonon gstreamer backend also still depends on GStreamer 0.10, although theoretically we could switch the default backend to VLC. I know that this is a burden on the Gnome community team as that they are maintaining the GStreamer packages., but I hope that we can still have both versions in 13.1 so that all desktops can enjoy their respective multimedia functions. Regards Raymond -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7

[opensuse-factory] Fate 315090 > Upgrade to Bluez 5
by Jeffrey Cheung 07 Aug '13

07 Aug '13

Hi all, Due to unware of openSUSE 13.1 development schedule, I got a sincere reminder from Ludwig Nussel that we already past the feature freeze with Milestone 4 now. So far, my RD already finished the work on x86-64 part but the i586 still work on progress. I wonder if this fate is allowed to proceed on openSUSE 13.1 development. thanks Jeffrey -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1