November 2012 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Packages for sale
by Henne Vogelsang 24 Nov '12

24 Nov '12

Hey, I would like to get rid of Archiving rsnapshop - A backup tool Base:System collectl - A very extensive system monitoring tool Base:System fs-check - Warning mails about full filesystems Base:System pwgen - Password generator Base:System rlwrap - Readline wrapper for commands without readline. Command history for telnet for instance. devel:tools rpmrebuild - Re-package a binary RPM from the installed files on the system. multimedia:apps ripit - Commandline audio ripper multimedia:apps tvtime - TV player network ez-ipupdate - dyndns etc. updater network:utilities knock - A tool to do something after a specific sequence of port hits. Port knocking. network:utilities pdsh - A distributed remote shell They are all very low maintenance (I basically haven't touched them for years). If you are interested in maintaining one of those, let me know. Otherwise I'll drop them :-) Henne -- Henne Vogelsang http://www.opensuse.org Everybody has a plan, until they get hit. - Mike Tyson -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

14 18

Re: [opensuse-factory] LibreOffice : Tumbleweed
by ellanios82 24 Nov '12

24 Nov '12

On 11/23/2012 04:52 PM, Patrick Shanahan wrote: >> have just installed from LibreOffice >> >web-site and it Works !! >> > >> > - am very happy >> > > remove it and reinstall from openSUSE repos. They are optimized to "work > better" in openSUSE. ................ thank you : have done as you recommend, but still, LibreOffice refuses to load ................ best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] Secure Boot on openSUSE: a battleplan
by Frederic Crozat 23 Nov '12

23 Nov '12

Hi all, if you haven't read my blog post already, I suggest you do here : http://blog.crozat.net/2012/11/secure-boot-on-opensuse-battleplan.html I'm detailing what was discussed during openSUSE Conference at the Secure Boot BoF, to get Secure Boot support for openSUSE. Help is welcome on this topic, of course (I know some folks in openSUSE team and in SUSE Labs are already doing an excellent job on implementing / packaging stuff for Secure Boot). -- Frederic Crozat <fcrozat(a)suse.com> SUSE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] LibreOffice : Tumbleweed
by ellanios82 23 Nov '12

23 Nov '12

Hello List - since yesterday's large 'zypper dup' , am unable to Start Libreoffice upon attempting to start in Konsole, with command : /usr/bin/libreoffice - do see on bottom of konsole tab-label < oosplash > . . . nothing happens, but konsole freezes at cursor, until freed by Ctl+C ............ - have totally uninstalled Libreoffice using Yast, and the re-installed with Yast the basic minimum, but. still cannot start libreoffice - however, as root, libreoffice starts OK - as User, libreoffice refuses to start ............... what to try, please ?? thanks Ellan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] LibreOffice : Tumbleweed[2] : using XFCE
by ellanios82 23 Nov '12

23 Nov '12

- omitted to mention : am using XFCE ____________________________________ Hello List - since yesterday's large 'zypper dup' , am unable to Start Libreoffice upon attempting to start in Konsole, with command : /usr/bin/libreoffice - do see on bottom of konsole tab-label < oosplash > . . . nothing happens, but konsole freezes at cursor, until freed by Ctl+C ............ - have totally uninstalled Libreoffice using Yast, and the re-installed with Yast the basic minimum, but. still cannot start libreoffice - however, as root, libreoffice starts OK - as User, libreoffice refuses to start ............... what to try, please ?? thanks Ellan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

[opensuse-factory] openSUSE 12.3 udl/udlfb/displaylink multiseat stuff & co
by Damian Ivanov 23 Nov '12

23 Nov '12

Heya, I bought that plugable multiseat stuff: http://plugable.com/products/ud-160-a/ This worked with udlfb in Fedora 17 and with udl in Fedora 18. The multiseat feautures in systemd were not included in openSUSE 12.2, but in 12.3 thanks to Frederic Crozat's work on systemd. It seems that loginctl correctly spawns a new seat with all device attached to the plugable station and screen shows up, but it is all green (AFAIK this is good and only confirms that driver has been loaded successfully), but it doesn't spawn any gdm/X entity. One more thing: "lsmod | grep udl" shows that both udl and udlfb are loaded, is this intended? dmesg shows udlfb loading and choosing the correct resolution for the monitor. So what is missing to have it play nicely (I guess the gdm/X patches for the seats) ? :) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] timezone missing in Factory build
by Ruediger Meier 23 Nov '12

23 Nov '12

Hi, the timezone package (/usr/share/zoneinfo) is not installed anymore per default when build against Factory. Is this really wanted? cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

13 25

Re: [opensuse-factory] Re: KDE 4.9 is now in Tumbleweed:Testing,
by ConteZero 22 Nov '12

22 Nov '12

Achim Gratz wrote: > I've updated to KDE 4.9.3 just fine (I did remember to revert the > gratuitous changes to /usr/share/kde4/config/kdm this time). After a > reboot zypper wants to downgrade to 4.8.5 since these three old patches > intervene: openSUSE-2012-588, openSUSE-2012-701, openSUSE-2012-685. > I've locked them and that seems to take care of everything and verify > says that the system is good. > > The error from the patch check does not make much sense to me: > > Problem: kdebase4-workspace-4.9.3-2.1.i586 requires kdebase4-workspace-branding > = 4.9.3, but this requirement cannot be provided > uninstallable providers: > kdebase4-workspace-branding-upstream-4.9.3-2.1.i586[Tumbleweed] > > kdebase4-workspace-branding-basedonopensuse-12.2-3.7.1.i586[current-Update] > > kdebase4-workspace-branding-basedonopensuse-12.2-3.3.1.i586[openSUSE-current-OSS] > > but maybe this gives somebody else an idea of where to look. I've a similar problem and I think the cause could be the same. I've conflicts from Yast Online Update (and also with Apper) caused by patches openSUSE-2012-588, openSUSE-2012-701 and openSUSE-2012-685: kwin-4.9.3-2.1.x86_64 conflicts with kdebase4-workspace-branding-openSUSE-12.2-6.8.1.x86_64 kdm-4.9.3-2.1.x86_64 conflicts with kdm-branding-openSUSE-12.2-11.12.1.noarch If I downgrade kwin and kdm the conflicts are resolved (but this is not a solution). If I use the packages: kdebase4-workspace-branding-openSUSE-12.2-6.10.2.x86_64 kdm-branding-openSUSE-12.2-11.18.2.noarch from KDE 49 repository I can resolve the conflicts without downgrading anything. My opinion is that the problem is the different version number of rpms. In Tumbleweed repository you have: kdebase4-workspace-branding-openSUSE-12.2-2.1.x86_64 kdm-branding-openSUSE-12.2-2.1.noarch In Updates repository: kdebase4-workspace-branding-openSUSE-12.2-6.8.1.x86_64 kdm-branding-openSUSE-12.2-11.12.1.noarch In KDE 49 repository: kdebase4-workspace-branding-openSUSE-12.2-6.10.2.x86_64 kdm-branding-openSUSE-12.2-11.18.2.noarch With the packages from Tumbleweed I've conflicts, with the packages from Updates repository I've to downgrade, with the packages from KDE 49 repository all works. My question is: why the packages from Tumbleweed have a lower version number than those from other repositories? It's not possible to use the same package version number of KDE 49 repository? Last thing: package kgpg is missing from Tumbleweed repository. Cheers, ConteZero -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 20

[opensuse-factory] module-init-tools require non-existent suse-module-tools?
by Jiri Slaby 22 Nov '12

22 Nov '12

Guys, after this request: https://build.opensuse.org/request/show/141930 module-init-tools in Base:System have 'Requires: suse-module-tools' which exist only in Jan's home project? And I see no request from that project to Base:System... Please revert that request until suse-module-tools lands in factory. This affects builds of Tumbleweed kernels right now. thanks, -- js suse labs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] documentation help and alterations for cacti
by doiggl＠velocitynet.com.au 22 Nov '12

22 Nov '12

Hello, I am trying to setup the package 'cacti' according to instructions listed at [1] but it seems the instructions are out of date, and I need some help with some final steps. [1]http://en.opensuse.org/Cacti -I have added this repository: zypper ar http://ftp5.gwdg.de/pub/opensuse/repositories/server:/monitoring/openSUSE_F… server:monitoring - I have installed these packages: cacti-0.8.8a-12.3.noarch.rpm cacti-spine-0.8.8a-7.11.x86_64.rpm Apache Configuration - I have setup /etc/apache2/vhosts.d/cacti.conf The next steps I am stuck because the directory /usr/share/cacti/ does not exist as listed in the instructions but the directory /srv/www/cacti/ does exist, after the install of cacti-0.8.8a-12.3.noarch.rpm Should refrences in the documentation be updated from /usr/share/cacti/ to /srv/www/cacti/ Apache and mysql both work. Its all on localhost 127.0.0.1 I think my cacti configuration files are not all configured to get cacti going. Any suggestions on what cacti configuration files to check next. Can someone please update/check the outdated instructions/documentation listed at [1] please. If this is posted to the incorrect list can it be forwarded to the correct list for action please. Thankyou Glenn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] cdrecord is no longer available in Tumbleweed??
by Patrick Shanahan 22 Nov '12

22 Nov '12

Had to burn some dvd's today and k3b complained cdrecord was not available, and checking software.opensuse.org/search found it was not. Installed cdrecord-3.01a08-1.15.x86_64 from Factory and proceeded to burn the dvd's. Question: cdrecord *should* be available? -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 26

[opensuse-factory] Nagios & Perl
by Esztermann, Ansgar 22 Nov '12

22 Nov '12

Hello List, after removing assorted cruft (unmaintained packages from older systems, some going back to 10.2...) from my installation, Nagios suddenly does not find libperl.so anymore. Sorry for my ignorance, but since this library is not placed in a standard directory, what is the mechanism to make it visible to the linker? Thanks, A. -- Ansgar Esztermann DV-Systemadministration Max-Planck-Institut für biophysikalische Chemie, Abteilung 105

3 3

[opensuse-factory] LightDM not authorized to shut down/restart/suspend/hibernate any more
by Guido Berhoerster 21 Nov '12

21 Nov '12

After some recent Factory changes LightDM cannot shut down/restart/suspend/hibernate any more, more specifically calling SuspendAllowed, HibernateAllowed on org.freedesktop.UPower and CanRestart, CanStop on org.freedesktop.ConsoleKit.Manager from the greeter session always returns false. I also see the following message in the logs: dbus-daemon[424]: dbus[424]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.12" (uid=107 pid=2203 comm="/usr/sbin/lightdm-gtk-greeter ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.3 " (uid=0 pid=439 comm="/usr/sbin/console-kit-daemon --no-daemon ") I've checked that ConsoleKit has the greeter session marked as local and active, so according to our default polkit privileges these actions should be allowed. Also from within an Xfce session the above actions work fine and use the same upower/ConsoleKit DBus interfaces. Fedora seems to have the same problem and their LightDM maintainers have added new PolicyKit rules (see http://pkgs.fedoraproject.org/cgit/lightdm.git/tree/lightdm.rules) _unconditionally_ authorizing the lightdm user to use the above interfaces. However, in the accompanying discussion (https://bugzilla.redhat.com/show_bug.cgi?id=872797 https://bugzilla.redhat.com/show_bug.cgi?id=857254) they seem rather confused and the only given rationale is that this makes things work. Currently adding these workaround rules also does not have any effect on openSUSE since our PolicyKit daemon for some reason does not load this crazy javascript plugin despite libmozjs185-1_0 being installed (I see the following error in the logs: polkitd[504]: Error opening libmozjs185.so. This is not a fatal error but polkit .rules files will not be evaluated. To enable rules evaluation, install the library ) Any idea what's going on here? -- Guido Berhoerster -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7

[opensuse-factory] md5sum for openSUSE-NET-Build0166-x86_64.iso
by Alex Naumov 21 Nov '12

21 Nov '12

Hello, as I can see, md5 for openSUSE-NET-Build0166-x86_64.iso is 27ff0624161f668dd382070422b1a66. http://download.opensuse.org/distribution/12.3-Milestone1/iso/openSUSE-NET-… I downloaded this image 3 times already, but every time got the same (and wrong) md5: 89b992e9a6d8556a68de03ebbac44bad. Where am I wrong? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Maintainer for X11:XOrg
by Tobias Klausmann 21 Nov '12

21 Nov '12

Hey there, X11:XOrg looks unmaintained for two weeks now. Is Stefan Dirsch still maintaining this Repo or did he move to another position at SUSE? He always did a good job and with X11:XOrg being such a important Repo for the Desktop, somebody, maybe someone at SUSE should step up and actively maintain this! If nobody is there to do it, i would step up and take the maintainership until someone else is willing to do it! Thanks Tobias -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Why can't i login to Desktop as root?
by Oddball 21 Nov '12

21 Nov '12

I need to log in to desktop as root, but after i enter the password and hit enter, this message pops-up: > Call to lnuser failed (temporary directories full?). Check your > installation. Is there something i have to do, to get root into my desktop again? Kind Regards, -- Have a nice day, Oddball. OS: Linux 3.7.0-rc2-1-desktop i686 Huidige gebruiker: oddball@EeePc-Rob-SFN9 Systeem: openSUSE 12.2 (i586) KDE: 4.8.5 (4.8.5) "release 2" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 43

Re: [opensuse-factory] Packages for sale
by Stefan Botter 21 Nov '12

21 Nov '12

Hi Jan, On Tuesday, November 20, 2012 06:01:06 PM Jan Engelhardt wrote: > On Tuesday 2012-11-20 13:23, Stefan Botter wrote: > >Hi, > > > >On Tuesday, November 20, 2012 12:43:45 PM Henne Vogelsang wrote: > >> I would like to get rid of > >> > >> network ez-ipupdate - dyndns etc. updater > > > >I'll take it. > > No rush. It's not like the loss of a maintainer means a synchronous > dropping of the package. > And sometimes, out-of-use packages rightfully get dropped. > In this example, because there is ddclient which is another - and > arguably more prevalent - implementation that handles DynDNS. Yes, possibly, but I happen to actively use ez-ipupdate, so I can manage the task of the maintainership. Greetings, Stefan -- Stefan Botter Network Manager Jacobs University Bremen gGmbH Campus Ring 1 | 28759 Bremen | Germany Commercial registry: Amtsgericht Bremen, HRB 18117 CEO: Prof. Dr. Joachim Treusch Chair Board of Governors: Prof. Dr. Karin Lochte

1 0

[opensuse-factory] Chromium browser has changed it's home location
by Raymond Wooninck 20 Nov '12

20 Nov '12

Dear openSUSE users, Since this morning, the Chromium browser will no longer be maintained on the openSUSE OBS, nor will it be provided together with the openSUSE distribution. Instead the Chromium browser will be build on Packman and be available for the already supported openSUSE versions. This new version will replace the chromium-ffmpeg package that was already delivered through Packman. In the next days, I will delete the Chromium package from it's home location network:chromium and also send a delete request to openSUSE:Factory. The reason for this change is that ffmpeg support is becoming more and more integrated with the browser itself, making it very hard to remove the ffmpeg related sourcefiles and still keeping a workable browser. In the last few weeks, I tried everything to keep Chromium part of the openSUSE distribution but unfortunately I failed. And as we all know ffmpeg is one of those packages that are not allowed to be present on the openSUSE OBS. Therefore the only logical decision was to move Chromium completely to Packman. The new package will be a full enabled Chromium with build-in support for ffmpeg. The new version 25.0.1329 is already available from Packman and should be installed automatically as that it replaces the chromium-ffmpeg package. If not, please check manually in order to get the latest version from Packman. This should be a one-time manual intervention. Regards Raymond Community Maintainer for the openSUSE Chromium package -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] KDE 4.9 is now in Tumbleweed:Testing
by Greg KH 19 Nov '12

19 Nov '12

Hi all. Thanks to Jiri for doing the heavy lifting, it looks like KDE 4.9 is almost ready to push to openSUSE:Tumbleweed. Right now it's built in openSUSE:Tumbleweed:Testing and seems to work for me, but it would be great if someone who really knows (and uses) KDE to actually test it out to verify it's all sane. So, could someone add this repo to their system, do a 'zypper dup' and let me know if they have any problems? thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 42

[opensuse-factory] Heads up: dbus at_console broken(?)
by Stefan Seyfried 19 Nov '12

19 Nov '12

Hi, after todays update to Factory, nm-applet could not communicate with NetworkManager anymore, see the gory details (and a very ugly workaround) at https://bugzilla.novell.com/show_bug.cgi?id=790222 Just check before updating, in case you have no network afterwards ;) -- Stefan Seyfried "If your lighter runs out of fluid or flint and stops making fire, and you can't be bothered to figure out about lighter fluid or flint, that is not Zippo's fault." -- bkw -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 6

[opensuse-factory] package group typo? Productivity/Text/Convertors
by Ruediger Meier 19 Nov '12

19 Nov '12

Hi, shouldn't it be ConvertErs here? http://en.opensuse.org/openSUSE:Package_group_guidelines cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Why is initrd needed...
by Linda Walsh 19 Nov '12

19 Nov '12

So far no one is able to explain why it is needed other than It's a fad or it's cool.. You have a 20MB RAM disc that you think you have to load and do secret things before you start my OS. I have a 12GB root disk (and RH/Fedora on their "Excuses for UsrMerge page, claims to need 400GB in root?! Talk about a broken model to be following!) Never the less, a 14 GB root with over 50% free.. and What, can't I put on my root hard disk that you have to have initrd? The drivers on my kernel are built-in. You are deliberately making people use a ram disk for no reason. Give me ANY reason. and don't say it's to mount /usr A "toy /usr/ that is not the full /usr partition lives on your ram disk in less than 20MB, I can throw away that much space in a 'dummy /usr' that the real /usr mounts over. It would be preferable to having to read all of it from disk and duplicating it 12 times for the 12 kernels I had in lilo when I last cleaned it out of initrd's that don't get used. Not only are you duplicating the space of all the utils in /usr that you need to put (ONLY because you moved them from /bin.. which if you hadn't done you wouldn't need to to copy them all to /usr). I read the /usrmerge crap... They miss a major point. If they want to merge /usr/bin with /bin, why not get rid of /usr/bin? Why not copy all of /usr/bin into /bin? But to boot do you really need 15G of /usr/share? Is /usr/games really required for boot? Do you need the complete linux source to boot in /usr/src? All of these irrelevant directories live in /usr The total of my /usr/bin, lib and lib64 (1.4G, 1.3G 3.2G) can easily live in the 9.7G free of my root. It's the rest of /usr that you are pulling along. If you want /usr/bin/lib/lib64 on root... why not just move them there? I split /usr and root because I don't need 20G of docs or fonts or source on my boot disk. Why would you claim that's the only viable answer you could come up with? Moreover, what is there on initrd that you can't put in root? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

17 45

[opensuse-factory] new packages: typo3-cms-4_{5,6,7} typo3-manager typo3-flow-1_1
by Thomas Worm 19 Nov '12

19 Nov '12

Hello, I submitted following new packages to factory: Package name: typo3-manager License: GPL-2.0+ OBS-URL: https://build.opensuse.org/package/show?package=typo3-manager&project=openS… Devel package: server:php:applications Factory status: accepted Description: Management utility for Typo3 CMS instances. Currently this utility helps installing Typo3 CMS instances. In future this package will support upgrading and removing Typo3 CMS instances. Package name: typo3-cms-4_5 License: GPL-2.0+ URL: http://www.typo3.org/ OBS-URL: https://build.opensuse.org/package/show?package=typo3-cms-4_5&project=serve… Devel package: server:php:applications Factory status: under review Description: Typo3 CMS is an enterprise content management system. Version 4.5 has long term support and is therefore widely used today. Package name: typo3-cms-4_6 License: GPL-2.0+ URL: http://www.typo3.org/ OBS-URL: https://build.opensuse.org/package/show?package=typo3-cms-4_6&project=serve… Devel package: server:php:applications Factory status: under review Description: Typo3 CMS is an enterprise content management system. Package name: typo3-cms-4_7 License: GPL-2.0+ URL: http://www.typo3.org/ OBS-URL: https://build.opensuse.org/package/show?package=typo3-cms-4_7&project=serve… Devel package: server:php:applications Factory status: under review Description: Typo3 CMS is an enterprise content management system. Package name: typo3-flow-1_1 License: LGPL-3.0+ URL: http://flow.typo3.org/ OBS-URL: https://build.opensuse.org/package/show?package=typo3-flow-1_1&project=serv… Devel package: server:php:applications Factory status: under review Description: Typo3 FLOW is an enterprise web application framework. It has been developed during redesign of Typo3 CMS and began to become a standalone Framework. Typo3 FLOW is one oft he modernst framework for PHP and gives companies the ability to develop fast stable and secure web applications. Typo3 CMS has been submitted in three versions because this are the most used version branches. The version branches are not fully compatible between each other, so all three are used currently by the community. (The idea behind is: to provide all version branches since the last stable long term support version.) -- Best Regards DATEV eG Thomas Worm IT-Security | V13 "Sicherheit ist unser Geschäft", Jörg von Pappenheim (26. September 2012, 10 Uhr) 90329 Nürnberg Telefon +49(911)319-3688 | Telefax +49(911)14725570 E-Mail thomas.worm(a)datev.de | www.datev.de Paumgartnerstr. 6 - 14 | Nürnberg ------------------------------------ This e-mail was signed with a digital certificate of DATEV eG, Nuremberg/Germany. Therefore, you may feel certain that this message was sent through us in its present form. If you receive an error message stating that the signature is invalid or cannot be verified, then the certificate is not available on your computer. You will find more detailed information on certificates and digital signatures at www.datev.com/certificates. DATEV Cooperative 90329 Nuremberg, Germany | Phone +49 911 319-0 | Fax +49 911 319-3196 E-mail info(a)datev.com | www.datev.com Company located at: 90429 Nuremberg, Germany, Paumgartnerstraße 6-14 | Registered at the Nuremberg Registry Court Number: GenReg No. 70 Executive Board Prof. Dieter Kempf (Chairman) Dipl.-Kfm. Wolfgang Stegmann (Deputy Chairman) Dipl.-Kfm. Michael Leistenschneider Dipl.-Kfm. Dr. Robert Mayr Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Chairman of the Supervisory Board: Reinhard Verholen

1 0

[opensuse-factory] zypper dup to factory hangs on restarting YaST2-Second-Stage service
by Andrey Borzenkov 19 Nov '12

19 Nov '12

Update went more or less smoothly up to the point when it installed yast2-installation. At this point it was frozen at 100%. Poking around - it tried to restart SuSEfirewall service and apparently never succeeded. UID PID PPID C STIME TTY TIME CMD root 7322 5968 0 15:51 tty1 00:00:00 -bash root 10436 7322 0 17:45 tty1 00:01:38 zypper dup root 12072 10436 0 22:05 tty1 00:00:00 rpm --root / --dbpath /var/lib/rpm -U --percent --force --nodeps -- /var/cache/zypp/packages/repo-oss/suse/noarch/yast2-installation-2.23.3-1.1.noarch.rpm root 12080 12072 0 22:05 tty1 00:00:00 /bin/sh /var/tmp/rpm-tmp.eFpzf6 1 root 12081 12080 0 22:05 tty1 00:00:00 /bin/systemctl try-restart YaST2-Second-Stage.service YaST2-Firstboot.service systemctl status YaST2-Second-Stage.service - YaST2 Second Stage Loaded: loaded (/lib/systemd/system/YaST2-Second-Stage.service; enabled) Active: deactivating (stop-sigterm) since Sat, 2012-11-17 22:05:55 MSK; 10min ago Main PID: 462 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/YaST2-Second-Stage.service Nov 17 19:50:52 linux-m0sc SuSEfirewall2[4994]: Firewall rules unloaded. Nov 17 19:50:52 linux-m0sc SuSEfirewall2[5003]: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 17 19:50:52 linux-m0sc SuSEfirewall2[5129]: Firewall rules successfully set Nov 17 19:50:57 linux-m0sc ifdown[5693]: eth0 device: Intel Corporation 82545EM Gigabit Ethernet Co Nov 17 19:50:57 linux-m0sc dhcpcd[5719]: eth0: sending signal 15 to pid 4642 Nov 17 19:50:57 linux-m0sc dhcpcd[4642]: eth0: received SIGTERM, stopping Nov 17 19:50:57 linux-m0sc dhcpcd[4642]: eth0: removing default route via 192.168.92.2 metric 0 Nov 17 19:50:57 linux-m0sc dhcpcd[4642]: eth0: removing IP address 192.168.92.128/24 Nov 17 19:50:57 linux-m0sc dhcpcd[5719]: eth0: exiting Nov 17 19:50:57 linux-m0sc dhcpcd[4642]: eth0: exiting Warning: Unit file changed on disk, 'systemctl --system daemon-reload' recommended. systemctl list-jobs 665 YaST2-Second-Stage.service restart running I had to use "systemctl cancel" to allow it to proceed. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] postfix wants sysvinit(syslog)
by Jan Engelhardt 19 Nov '12

19 Nov '12

$ zypper dup --no-r Problem: postfix-2.8.12-1.3.x86_64 krever sysvinit(syslog), men denne nødvendige filen finnes ikke slettede leverandører: syslog-service-1.4.1-761.1.noarch uinstallerbare nødvendige pakker: syslogd-1.4.1-762.1.i586[factory] systemd-logger-195-4.1.i586[factory] syslogd-1.4.1-762.1.x86_64[factory] systemd-logger-195-4.1.x86_64[factory] Løsning 1: avinstallasjon av postfix-2.8.12-1.2.x86_64 Løsning 2: avinstallasjon av rsyslog-7.2.1-1.1.x86_64 Løsning 3: behold den foreldede pakken syslog-service-1.4.1-761.1.noarch Løsning 4: ignorer noen avhengigheter selv om postfix-2.8.12-1.3.x86_64 ikke vil fungere So, who removed sysvinit(syslog) without modifying postfix first? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] When was it decided /usr had to be on root? -- thought it was decided that wouldn't be done?
by Linda Walsh 19 Nov '12

19 Nov '12

I stared upgrading to 12.2 -- and all was going fine until I rebooted. Then complete failure -- had to use rescue disk. Why? Because it's expected that /usr/{s,}bin will be on the root partition (or the same partition as /{s,}bin). 77 files are cross-linked in /sbin, including: swapon, xfs_repair, pivot_root/switch_root fbset fsck findfs (used by mount to find labels or UUID's on disks) losetup --- /bin: arch -> /usr/bin/arch basename -> /usr/bin/basename cat -> /usr/bin/cat chgrp -> /usr/bin/chgrp chmod -> /usr/bin/chmod chown -> /usr/bin/chown cp -> /usr/bin/cp cpio -> /usr/bin/cpio date -> /usr/bin/date dd -> /usr/bin/dd df -> /usr/bin/df dmesg -> /usr/bin/dmesg echo -> /usr/bin/echo ed -> /usr/bin/ed egrep -> /usr/bin/egrep eject -> /usr/bin/eject false -> /usr/bin/false fgrep -> /usr/bin/fgrep fillup -> /usr/bin/fillup findmnt -> /usr/bin/findmnt gawk -> /usr/bin/gawk grep -> /usr/bin/grep initviocons -> /usr/bin/initviocons ip -> /usr/sbin/ip ipg -> /usr/bin/ipg kill -> /usr/bin/kill ln -> /usr/bin/ln logger -> /usr/bin/logger ls -> /usr/bin/ls lsblk -> /usr/bin/lsblk mail -> /usr/bin/mailx md5sum -> /usr/bin/md5sum mkdir -> /usr/bin/mkdir mknod -> /usr/bin/mknod mktemp -> /usr/bin/mktemp more -> /usr/bin/more ****mount -> /usr/bin/mount**** mv -> /usr/bin/mv ping -> /usr/bin/ping ping6 -> /usr/bin/ping6 pwd -> /usr/bin/pwd readlink -> /usr/bin/readlink rm -> /usr/bin/rm rmdir -> /usr/bin/rmdir --------------- Needless to most of the startup scripts fail due to all the basic utils missing, but the worse -- /bin/mount requires /usr be mounted in order to run mount. Last I understood, this WASN'T going to be done (out of the systemd "discussion"...). So how do I boot now w/o a rescue disk? How is it that this made it past anyone else who cared as I know I wasn't the only one. Historically, "/bin" was supposed to contain statically linked binaries -- though at worst, have their libs in /lib which was also expected to reside on the root fs. /usr was where all the "larger" programs were -- ones that required lots of linkages, but the basic system was expected to be able to come up in single user without /usr being mounted. There was a reason why that choice was made and many people pushed for it -- one of those reasons -- being able to boot when /usr wasn't mounted -- also, historically, /usr, being larger, took longer to "fsck", um... so what happened? Worse, BTW, it's not so simple as to simply copy those binaries to /bin -- as many of them now have 1 or more linkages on /usr/lib: > ldd /usr/bin/mount linux-vdso.so.1 (0x00007fffc5fff000) libmount.so.1 => /usr/lib64/libmount.so.1 (0x00007fa8d143d000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007fa8d121f000) libc.so.6 => /lib64/libc.so.6 (0x00007fa8d0e78000) >>> libblkid.so.1 => /usr/lib64/libblkid.so.1 (0x00007fa8d0c50000) <<< libdl.so.2 => /lib64/libdl.so.2 (0x00007fa8d0a4c000) /lib64/ld-linux-x86-64.so.2 (0x00007fa8d1669000) libuuid.so.1 => /lib64/libuuid.so.1 (0x00007fa8d0847000) --- i.e. "mount" can't function because *1* of it's library files has been moved to /usr. why??? Why did it have to move? Could someone explain to me why I shouldn't feel betrayed and lied to? Can this be fixed ASAP -- better, use time travel and make it not happen in the first place. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

18 59

[opensuse-factory] Why udisksd takes so much memory?
by Ilya Chernykh 18 Nov '12

18 Nov '12

On my system it uses thrice the amount of memory that takes hald. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] python-Sphinx is broken?
by Kyrill Detinov 18 Nov '12

18 Nov '12

Hello. I think, python-Sphinx is broken after recent update. Changes of Revision 13 +Tue Nov 6 00:24:32 UTC 2012 - saschpe(a)suse.de + +- Remove obsolete SUSE version checks +- Don't package locale files twice %files -f sphinx.lang @@ -99,9 +89,10 @@ %doc AUTHORS CHANGES LICENSE README TODO %{_bindir}/sphinx-* %{python_sitelib}/* +%exclude %{python_sitelib}/sphinx/locale/ I see at least four packages failed to build: python-djvulibre python-keystoneclient python-numpy-doc python-polib The error is: File "/usr/lib/python2.7/site-packages/sphinx/application.py", line 25, in <module> from sphinx import package_dir, locale ImportError: cannot import name locale -- WBR Kyrill

2 1

[opensuse-factory] Update from 12.2 to Factory resets RTC time from local to UTC
by Andrey Borzenkov 17 Nov '12

17 Nov '12

Tested update from 12.2 to Factory using "zypper dup". 12.2 was set to use local time in RTC during installation. After update to Factory YaST2 now claims that RTC is set to UTC. /etc/adjtime is also set to UTC (I did not check the value in 12.2 so cannot say whether it was changed or not). timedatectl output is funny. Local time: Sat, 2012-11-17 23:05:34 MSK Universal time: Sat, 2012-11-17 19:05:34 UTC RTC time: Sat, 2012-11-17 23:05:34 Timezone: Europe/Moscow NTP enabled: no NTP synchronized: no RTC in local TZ: no So at the same time it claim that RTC is in UTC and that RTC time is local time. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Plymouth, can somebody please tell me where it stores the images used?
by Oddball 17 Nov '12

17 Nov '12

Hi, It is really not nice, if a manual just gives useless directions. I want to change the background image that is used by Plymouth to a black background, showing the moving lights, to get rid of the awful over-sized chameleon icon, and the ugly green color. Is it possible somebody tells me the path to the image store directory? Kind regards. -- Have a nice day, Oddball. OS: Linux 3.7.0-rc2-1-desktop i686 Huidige gebruiker: oddball@EeePc-Rob-SFN9 Systeem: openSUSE 12.2 (i586) KDE: 4.8.5 (4.8.5) "release 2" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 35

[opensuse-factory] GNOME live Build0184 still does not boot
by Andrey Borzenkov 17 Nov '12

17 Nov '12

Job klogd.service/start failed with result 'dependency' dbus.service start request repeated too quickly, refusing to start -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] KDE 4.9 is now in Tumbleweed:Testing - take 2
by Greg KH 17 Nov '12

17 Nov '12

Hi all. Ok, now everything seems to be built properly, and it installs, so if others could test out the openSUSE:Tumbleweed:Testing repo, to verify that the KDE 4.9 update works properly, I would really appreciate it. After this, a big GNOME update is in the works. It's currently building in openSUSE:Tumbleweed:GNOME if people are curious, and like watching packages slowly get resolved. thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] heads up: gdm fails to start (incl. solution)
by Dimstar / Dominique Leuenberger 16 Nov '12

16 Nov '12

Hi all, Some of you might have run into this (SORRY!), but as agreed as a targer, packages that do support it, have now systemd enabled (most notably, that means they use systemd-login instead of ConsoleKit). Unfortunately, gdm failed me on that one... and only comes up with a 'oh no, something has gone wrong screen'. The log files were rather obvious, on what's going wrong though. So, if you see this, please get the polkit packages from Base:System (current version 0.108) and install those. It has as well the systemd integration enabled. Make sure to kill polkitd or restart your system, as otherwise you end up with an updated package, but an old polkitd in memory... no win :) For the ones that were hit by this, sorry for that. Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Opinion poll: CUPS 1.6 version upgrade
by Johannes Meixner 16 Nov '12

16 Nov '12

Hello, regarding CUPS version upgrade to 1.6 see https://bugzilla.novell.com/show_bug.cgi?id=735404 "CUPS 1.6 has major incompatible changes. Do not use CUPS 1.6.1 on production systems!" I like to ask for your opinion and contribution what the openSUSE community would like to do in this regard. Kind Regards Johannes Meixner -- SUSE LINUX Products GmbH -- Maxfeldstrasse 5 -- 90409 Nuernberg -- Germany HRB 16746 (AG Nuernberg) GF: Jeff Hawn, Jennifer Guild, Felix Imendoerffer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 12.3M1 looses rsyslog shortly after system generation
by Freek de Kruijf 16 Nov '12

16 Nov '12

After generating a standard system in a VM from the DVD iso of 12.3 M1 I do get some messages in /var/log/messages and a last message telling: 2012-11-15T23:53:01.950045+01:00 linux rsyslogd: [origin software="rsyslogd" swVersion="7.2.1" x-pid="1497" x-info="http://www.rsyslog.com"] exiting on signal 15. After that nothing appears in that file and the command # systemctl start rsyslog.service Failed to issue method call: Unit rsyslog.service failed to load: No such file or directory. See system logs and 'systemctl status rsyslog.service' for details. This is an ironic message because the system log is not working and the status command returns: # systemctl status rsyslog.service rsyslog.service Loaded: error (Reason: No such file or directory) Active: inactive (dead) How to proceed? -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] What does it mean?
by Ilya Chernykh 16 Nov '12

16 Nov '12

A package in Factory gets "unresolvable" with the following message: pkgconfig(gdk-pixbuf-2.0) needed by gtk1-compat-devel, (provider gdk-pixbuf-devel is conflicted by installed gtk1-compat-devel) What should I do? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] more probs booting 12.3 m1
by Patrick Shanahan 16 Nov '12

16 Nov '12

I have been running/updating 12.3/m0/m1 in a VBox for some time and recently experienced a problem booting the vm which was solved by chrooting in a reissuing grub2-install after updating the installed system. I am again unable to boot the vm which provides the following error msg: 3 logical volume(s) in the volume group "system" now active an no further action. I chrooted into and updated the system, zypper dup, and issued: /usr/sbin/grub2-install /dev/sda which completed successfully. But I am still unable to boot? what to do? tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 8

[opensuse-factory] 12.3 M1 DVD sha1sum
by johnm 15 Nov '12

15 Nov '12

The sha1 on the download page doesn't match. ? But the gpg signature is good. -johnm -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Any fixes for these failed iso builds (Project openSUSE:Factory:Live)
by doiggl＠velocitynet.com.au 15 Nov '12

15 Nov '12

Hello Any fixes for these faild iso builds. --Glenn Package kiwi-image-livecd-kde.x86_64 (Project openSUSE:Factory:Live) https://build.opensuse.org/package/live_build_log?arch=x86_64&package=kiwi-… results: . . [ 1235s] + chkconfig sshd off [ 1235s] + chkconfig cron off [ 1235s] insserv: can not connect systemd: Failed to connect to socket /run/systemd/private: No such file or directory [ 1235s] process 25795: arguments to dbus_connection_close() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 2889. [ 1235s] This is normally a bug in some application using the D-Bus library. [ 1235s] D-Bus not built with -rdynamic so unable to print a backtrace [ 1235s] /sbin/insserv failed, exit code 0 [ 1235s] Nov-15 00:22:47 <3> : Couldn't setup image system [ 1235s] Nov-15 00:22:47 <3> : KIWI exited with error(s) [ 1235s] Nov-15 00:22:47 <1> : Release package manager lock [ 1235s] Nov-15 00:22:47 <1> : EXEC [rm -f /var/lock/kiwi-init.lock] [ 1235s] Nov-15 00:22:47 <1> : Release package manager lock [ 1235s] Nov-15 00:22:47 <1> : EXEC [rm -f /var/lock/kiwi-init.lock] [ 1236s] Nov-15 00:22:47 <1> : Umounting path: /usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp//base-system/home/rpmdir/rpms [ 1236s] Nov-15 00:22:47 <1> : EXEC [umount "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp//base-system/home/rpmdir/rpms" 2>&1] [ 1236s] Nov-15 00:22:47 <1> : EXEC [rmdir -p "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp//base-system/home/rpmdir/rpms" 2>&1] [ 1236s] Nov-15 00:22:47 <1> : Umounting path: /usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp//var/cache/kiwi [ 1236s] Nov-15 00:22:47 <1> : EXEC [umount "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp//var/cache/kiwi" 2>&1] [ 1236s] Nov-15 00:22:47 <1> : Umounting path: /usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/dev [ 1236s] Nov-15 00:22:47 <1> : EXEC [umount "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/dev" 2>&1] [ 1236s] Nov-15 00:22:47 <1> : Umounting path: /usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/dev/pts [ 1236s] Nov-15 00:22:47 <1> : EXEC [umount "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/dev/pts" 2>&1] [ 1236s] Nov-15 00:22:47 <1> : Umounting path: /usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/sys [ 1236s] Nov-15 00:22:47 <1> : EXEC [umount "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/sys" 2>&1] [ 1238s] Nov-15 00:22:49 <1> : Umounting path: /usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/var/run/dbus [ 1238s] Nov-15 00:22:49 <1> : EXEC [umount "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/var/run/dbus" 2>&1] [ 1238s] Nov-15 00:22:50 <1> : Umounting path: /usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/dev [ 1238s] Nov-15 00:22:50 <1> : EXEC [umount "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/dev" 2>&1] [ 1238s] Nov-15 00:22:50 <1> : Umounting path: /usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/proc [ 1238s] Nov-15 00:22:50 <1> : EXEC [umount "/usr/src/packages/BUILD/kiwi-image-livecd-kde-12.1/tmp/proc" 2>&1] [ 1238s] Nov-15 00:22:50 <1> : EXEC [rm -f /var/cache/kiwi/zypper/zypper.conf.18224 /var/cache/kiwi/zypper/zypp.conf.18224] [ 1239s] error: Bad exit status from /var/tmp/rpm-tmp.2MGE6s (%build) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] new package: ninja-ide
by Izaac Zavaleta 15 Nov '12

15 Nov '12

Hello everyone, I'm glad to present you this new package called ninja-ide a Python IDE written using python-qt and Qt libraries, therefore is very portable it runs on WIndows, Mac and is already included in some Linux distributions official repositories. Excerpt from the website: http://ninja-ide.org NINJA-IDE (from the recursive acronym: "Ninja-IDE Is Not Just Another IDE"), is a cross-platform integrated development environment (IDE). NINJA-IDE runs on Linux/X11, Mac OS X and Windows desktop operating systems, and allows developers to create applications for several purposes using all the tools and utilities of NINJA-IDE, making the task of writing software easier and more enjoyable. The package is built using PyQt and depends on Qt >= 4.7, and pyinotify to handle filesystem events. I've been personally using the IDE at work and I'd say is very cool, and has a pep8 checker that turns to be very handy. It also supports plugins. The project is in constant development and has its Github repository in good health, but I've decided to stick with stable releases (2.1.1 at the moment). https://github.com/ninja-ide/ninja-ide I submitted the package to devel:languages:python and is building without issues: https://build.opensuse.org/package/show?package=ninja-ide&project=devel%3Al… Regards. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] GNOME3.6 for tumbleweed
by Dominique Leuenberger a.k.a DimStar 14 Nov '12

14 Nov '12

Greg, Not sure if you already received questions about GNOME 3.6 for tumbleweed, but I did some pre-staging work which hopefully helps you. the repository https://build.opensuse.org/project/show?project=home:dimstar:GS36 builds against Tumbleweed and has (hopefully) all the things needed to get GNOME 3.6 integrated into Tumbleweed (It's mostly a copy of GNOME:STABLE:3.6; all those packages made their way also in Factory, which is a prerequisite for Tumbleweed). Do you have any particular integration tests you usually do? Expected fallouts: - Evolution API changes: anything building against evolution in TW is likely to break. - Issues with gstreamer 1.0 / 0.10: some apps happen to link (directly and indirectly) to gstreamer 0.10 and 1.0 at the same time (rhythmbox is an example doing so.. fixed in home:dimstar:GS36 of course). - glib did not have too intrusive changes, but it might still have a few fallouts (API strictness) - Not unlikely, other things have API changes which I do not remember about and am not fully aware of other things linking to it... If there is anything I can verify for you, please let me know. Best regards, Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 5

[opensuse-factory] Heads up: problems with crypttab and LVM/mount by label
by Stefan Seyfried 14 Nov '12

14 Nov '12

Hi all, I had two hours of fun getting my machine to boot again after todays update to FACTORY. * I mount my extra data partitions by label and they are on LVM * I have an old fashioned cryptohome (/etc/crypttab) Right now: * mount by label of LVM seems broken https://bugzilla.novell.com/789020 * cryptohome does not get mounted https://bugzilla.novell.com/789019 Also, I had to uninstall plymouth from "init=/bin/bash" and then mkinitrd, since it did not ask me for the passphrase and did not allow anything else to ask for the passphrasse, but I don't have enough information on that issue to file a bugreport and don't want to reboot my box now that it finally has booted and logged me in again ;-) The workaround for the mount by label problem was to replace "LABEL=/space /space ..." with "/dev/mapper/main-space /space" in /etc/fstab, the workaround for the cryptohome problem is to switch to VT1, log in and do a "mount /home", then switch back to X and log in via gdm. Good luck :-) seife -- Stefan Seyfried "If your lighter runs out of fluid or flint and stops making fire, and you can't be bothered to figure out about lighter fluid or flint, that is not Zippo's fault." -- bkw -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 17

[opensuse-factory] syslinux / exelinux
by Jon Nelson 14 Nov '12

14 Nov '12

For a variety of reasons, I have tried grub, grub2, lilo, and now syslinux (extlinux, actually). In fact, I am quite happy with syslinux. It feels a lot like grub, without the huge config file (grub2) or the other issues I had with lilo. What would it take to get syslinux (extlinux, actually) support into yast2 or whatever as a supported bootloader? I am willing to do some coding. For me, a big benefit is that - once installed - it does not need to be run again even if the config file changes, as well as being fast and easy to use. -- Jon -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] GNOME liveCD fails to boot with endless stream of dbus/avahi errors.
by Andrey Borzenkov 14 Nov '12

14 Nov '12

I tried to boot or install from openSUSE-GNOME-LiveCD-x86_64-Build0174-Media.iso in VMware player but selecting either boot or install results in endless stream of dbus.service start request repeated too quickly, refusing to start avahi-daemon.service start request repeated too quickly, refusing to start Does it work for someone? I recall only NET iso was mentioned but I can't use it due to connectivity issues. TIA -andrey -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Not receiving messages
by Ken Schneider - Factory 13 Nov '12

13 Nov '12

Anyone else having problems getting email from this list? -- Ken Schneider -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] list problem
by Ken Schneider - Factory 13 Nov '12

13 Nov '12

Found problem on my server. Sorry for the noise. -- Ken Schneider -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] BoF: Release Schedule NG
by Stephan Kulow 12 Nov '12

12 Nov '12

Hi, I'm pretty tired after returning to my home, so all I want to write are my impressions of the BoF about the release schedule. I gave a talk, Robert had two and all three had interesting discussions and then we had a 90 minutes BoF about the same topic: the factory development process. And all in all I would like to summarize this way: our schedule is not the problem, the process needs improvement and the distribution needs more people to take responsibility. The main part of the BoF was about if we need to change 12.3's schedule to implement changes or not. We agreed to implement what we can and stick to the schedule - even if that means that 12.3 won't be our strongest release. But reliable release schedule and reliable quality are our strongest priorities - features and number of packages come after that. That said, we were about 20 people in that BoF, so we can only give recommendations to the developer community as a whole. But in case you agree, remember: November 8 is the release of Milestone1 and so far we can't even install filesystem :( Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Tumbleweed: kernel-xen build failure
by Peter Hanisch 12 Nov '12

12 Nov '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear all, I just wanted to mention that the kernel-xen build (for both i586 and x86_64) has been failing in Tumbleweed for a couple of days, giving problems upon doing a zypper dup, which proposes to upgrade kernel-desktop while simultaneously downgrading the kernel-*-devel projects. > https://build.opensuse.org/project/status?project=openSUSE%3ATumbleweed The > error message in the build log is: > [ 8927s] > /home/abuild/rpmbuild/BUILD/kernel-xen-3.6.5/linux-3.6/init/main.c:638: > undefined reference to `efi_free_boot_services' Is this a bigger problem or just a spontaneous hiccup? All the best, Peter -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAEBAgAGBQJQl7iAAAoJENcYdssjh8D4NvgQAJsPXbycNUEVLP7P+A3PPZXE Ix6HoKWAVV+KKJRKm2p8Gfrc2jb2r0Qa2WVGynzGqJ5Xn7HRQIWLyWNIyE7Br+qO DhYHsWhBHDb+NT/XNAODEHqGUWvupA5Iz2DEGDMze0DZrkUNtFY4pibO+Ztgx6SG IeRvLfAWnSyE+XBxGi7Gg9q2js4s4/uNr+oSU1lF67TtKrNUskd3lOL/8ggmlieQ KG1t/kaK8o5uh3z3FTdeKcm+YX+PfSdGtxSRcaUJFPG3iGcGhJUhjpYqJ5H+QQG1 ak2rtnki5tdC+TC74DujKuJbmX4ibeKpXA05i4/n9TbgNJntsfDg7b8ydsCtEPqo 6X8SzK1emTHQ12bNkKti+uctGYUzxVqKjL8Ubsav3onGDWuVDZfbTMnj0BuPppm8 715unBAfWtOE/Nn32pB6DnwIAQpBhgulz7bMZAqLmWf+hZvQp+F0GnW24BUeEacP HB75XWZ8O3DOZZTMfRazJTNFi+bDZKZP+AMoWFHPgJ0LyJfPrA1qqfAO4elfvqrH JYfjl9jiODd3vxU19o2Jyfvw8VTFlBjYkJUtIa/oDm6GMBcMtYYiISgpGX0DBPwL YSsBkRnP3tOWJjK46y2SWMvFPBX4wFAewUCjz5uVI3WjIgzVNxylNAu1esY7oS8b U560TOwmoNO4EMvlPzu+ =9xRm -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

Re: [opensuse-factory] python2 or python3
by "Stefan Brüns" 12 Nov '12

12 Nov '12

Am 29.08.12, schrieb Alin M Elena <alinm.elena(a)gmail.com>: > > PS can we also, cripple kmail by default, or update the settings of our > mailing list to accept html emails... > It is bloody annoying to get your messages bounced back because of the default > settings of the mail client. > You can set the HTML preferences of KMail per contact, just add an addressbook entry and select "Contact prefers messages formatted as: plain text" Regards, Stefan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Proposal for 12.3 schedule
by Stephan Kulow 12 Nov '12

12 Nov '12

Hi, I played with dates and holidays and it's *very*, *very* tight ;( What I came up with is basically: 20121003: Milestone 0 20121108: Milestone 1 20121213: Milestone 2 It's 5 weeks between 1 and 2, but releasing one in between is not worth it and I can make 1 earlier and 2 later ;( 20130117: Beta1 20130207: RC1 20130228: RC2 20130307: GM 20130313: FCS In theory this can work out, but in practice we again have gained 94 packages not building ;( Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 13