Hello,
can any help or say it is possible ;) to install 11.1 with a Mic. Wireless
Entertainment Desktop 7000 Keyboard / Mouse ?
I can install the 11.1, afterward I have no Keyboard or Mouse in a Desktop ?
in the console I have sometime a Keyboard :-(.
--
mit freundlichen Grüßen / best Regards,
Günther J. Niederwimmer
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-factory+help(a)opensuse.org
Hallo.
Maybe you remember that we tried to upgrade libusb0 to libusb1 +
libusb-compat in beta phase of openSUSE 11.1.
We got a lot of bug reports. That forced us to switch back to libusb0.
But it was a very valuable feedback for upstream.
Upstream tried to debug and fix all these issues and libusb1 reached
version 1.0.0 and it became a new stable branch in December.
That is why I want to try the full switch to libusb1 again.
Please report any problems related to libusb. libusb-compat is not a
100% identical to libusb0 and there may be particular problems that
should be fixes in applications - incorrect use of libusb, that worked
in libusb0, but does not work in libusb1.
--
Best Regards / S pozdravem,
Stanislav Brabec
software developer
---------------------------------------------------------------------
SUSE LINUX, s. r. o. e-mail: sbrabec(a)suse.cz
Lihovarská 1060/12 tel: +420 284 028 966, +49 911 740538747
190 00 Praha 9 fax: +420 284 028 951
Czech Republic http://www.suse.cz/
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-factory+help(a)opensuse.org
Hello Mates,
i would like to ask about submitrequests. It would be great, if openSUSE
Members can make submitrequests in openSUSE:Factory.
--
Sincereley yours
Sascha Manns
openSUSE Marketing Team
openSUSE Build Service
openSUSE Features Screening Team
Web: http://saschamanns.gulli.to
Project-Blog: http://lizards.opensuse.org/author/saigkill
Private-Blog: http://saschasbacktrace.blogspot.com
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-factory+help(a)opensuse.org
I had a problem with kaffeine x86_64 crashing when I changed stations. I
built and installed xine-lib-1.1.16.2 which cured the crash, but audio
outputs a few syllables then goes silent - happens on start up and on
station change.
I tried rebuilding kaffeine from kaffeine-0.8.7-1.142.src.rpm to see if
would help, but it complains because /opt/kde3/bin/dcopildcpp is not
installed.
Which package delivers the above file?
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-factory+help(a)opensuse.org
Hello all
I downloaded and used openSUSE-Factory-NET-i586-Build0052-Media.iso to install Factory on 2
machines. Things went a lot better than openSUSE-Factory-NET-i586-Build0050-Media.iso - good
work!
#######################
# Net installation
#######################
First remark, the Net install went quickly - great d/l speeds!
Second remark, during the installation in the "Running
Internet Connection Test" window, I encountered the following (small) error:
Error
Download failed:
File '/content key' not found on medium
'http://download.opensuse.org/distribution/11.2/repo/non-oss/'
History
- Resource not found
#######################
# Initial startup
#######################
# machine 1
On the Gigabyte.GA-EP45-DS5 / CPU Q9550 / 4 Go RAM - the installation finished fine and
basic first startup went well. Everything seems fine.
As a side note, I guess I need to get used to kde4 (I say that because I had a conflit in
yast when I tried to add a "kde3 basic" package... probably my fault...I was looking for a
kde 3 pattern to add to add kde3 as well during the net install but couldn't fine anything
- hint, hint - so I just added a 'kde 3 base' selection and tried that but in the
end I ended up removing it due to conflicts... :(
My didn't sound card - a "Xonar Essence STX" didn't error out in Yast as in previous
versions of opensuse but the son icon doesn't "show up" in the kde4 task manager tool ....
Still some progress has been made.
Note : The "Xonar Essence STX" card is set up as the primary sound cart in "yast2/son"
but when I hit 'edit' - the following message appears 'There are no options available for
this module'
# Xonar Essence STX details
03:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
Subsystem: ASUSTeK Computer Inc. Virtuoso 100 (Xonar Essence STX)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
I haven't played with the installation too much more yet as I wanted to install 11.2
on a laptop
# machine 2
I also installed 11.2 on an old HP nc6120 / Pentium M 1773 / 1.5 Go RAM - it was straight
kde4 net install - the installation finished fine but first basic startup didn't....
When nc6120 rebooted it only got as far as init 3
Welcome to openSUSE 11.2 Alpha ....
nc login high cpu load 0.82
nc cpu load 0.82
...
...
...
Question: anyone tried the VirtualBox v 2.2.0 on opensuse 11.2 yet?
Regards
James
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-factory+help(a)opensuse.org
I'm rebuilding the src package from the repo Packman, because the
application Miro instaled with the rpm package 2.0.3 do'nt works in my
system (Opensuse 11.1).
With the appliaction I got the error:
File "/usr/lib/python2.6/site-packages/miro/startup.py", line 83, in wrapped
func(*args, **kwargs)
File "/usr/lib/python2.6/site-packages/miro/startup.py", line 230,
in reconnect_downloaders
item.reconnect_downloaders()
File "/usr/lib/python2.6/site-packages/miro/item.py", line 1474, in
reconnect_downloaders
item.setup_links()
File "/usr/lib/python2.6/site-packages/miro/item.py", line 1268, in
setup_links
moviedata.movieDataUpdater.requestUpdate (self)
File "/usr/lib/python2.6/site-packages/miro/moviedata.py", line 201,
in requestUpdate
self.queue.put(MovieDataInfo(item))
File "/usr/lib/python2.6/site-packages/miro/moviedata.py", line 90,
in __init__
fileutil.expand_filename(self.videoPath),
fileutil.expand_filename(self.thumbnailPath))
File "/usr/lib/python2.6/site-packages/miro/plat/utils.py", line
292, in movie_data_program_info
return app.renderer.movie_data_program_info(moviePath, thumbnailPath)
AttributeError: 'NoneType' object has no attribute 'movie_data_program_info'
/usr/lib/python2.6/site-packages/miro/eventloop.py:179:
DeprecationWarning: socket.ssl() is deprecated. Use ssl.wrap_socket()
instead.
result = func(*args, **kwargs)
_________________________________________________________________
When I try to rebuild the src.rpm, I got:
/usr/src/packages/BUILD/Miro-2.0.3/portable/util.py:38:
DeprecationWarning: the sha module is deprecated; use the hashlib
module instead
import sha
python bindings for libtorrent-rasterbar not installed on this system
I could'nt find the package python bindings for libtorrent-rasterbar.
Some one can help me?
Thanks
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-factory+help(a)opensuse.org
Hi,
I wanted to release a first milestone before easter, but unfortunately I found
2 blocking issues while pretesting the DVDs and the live cds have a very poor
performance at the moment, so I withdraw this idea.
Next chance to release a milestone is the week after easter week - e.g. april
23rd. It would be cool if more people could test factory installation and live
cds and file bug reports, so the first milestone is good enough.
The end of april is basically the last chance to release a first milestone:
http://ktown.kde.org/~coolo/opensuse_release/
Greetings, Stephan
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-factory+help(a)opensuse.org