December 2008 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] How to check how a font is rendered?
by Cristian Morales Vega 20 Dec '08

20 Dec '08

I'm having a problem with the font rendering with my new installation of 11.1. It looks like antialiasing isn't disabled when BYTECODE_BW_MAX_PIXEL says it should. But I would like to be sure... there is any command that, having for input font and size, returns if it's using antialiasing, hinting (from the font or autohinting), etc.? Thanks. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 1

[opensuse-factory] Invisible rpm-md
by Benji Weber 20 Dec '08

20 Dec '08

Greetings all, Forgive me if I've missed an email about this, but where's the rpm-md metadata for http://download.opensuse.org/factory/repo/oss/suse/ ? -- Benjamin Weber -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] OpenSuSE 11.1 - Ndiswrapper Troubles
by Sudhir 19 Dec '08

19 Dec '08

SuSE 11.1 was installed on an Amilo laptop manufactured by Fujistu. The ndiswrapper does not work with 11.1 but works fine with 11.0. The ndis drivers won't compile from source. There are errors from a C function call. Does anyone have a solution to this? Sudhir -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] scheduling while atomic
by Dominique Leuenberger 19 Dec '08

19 Dec '08

Hi, I see this happening quiet often in my log file and I assume it's one of the drivers which is not playing nicely. Of course I will probably just hear as a reply that my lernel is tained (doh! I know) and not supported in this case... but maybe, really only maybe, somebody has seen similiar things on non-tainted kernels? If not I'll try to get this thing in my log file without the nvidia blob (I remember having seen it also without.. but I won't put my hands on fire for this). The log reads: BUG: scheduling while atomic: swapper/0/0x10000100 Modules linked in: sco bridge stp bnep rfcomm l2cap bluetooth ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit af_packet binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device ppdev vmnet(N) parport_pc parport vmblock(N) vmci(N) vmmon(N) nls_utf8 cifs(X) ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod snd_hda_intel snd_pcm snd_timer video snd_page_alloc snd_hwdep tg3 output intel_agp iTCO_wdt i2c_i801 snd wmi nvidia(PN) button rtc_cmos libphy battery ac sr_mod rtc_core i2c_core pcspkr iTCO_vendor_support dcdbas(X) rtc_lib cdrom soundcore sg joydev usbhid hid ff_memless sd_mod uhci_hcd ehci_hcd crc_t10dif usbcore edd ext3 mbcache jbd fan ata_piix ahci libata scsi_mod dock thermal processor thermal_sys hwmon Supported: No CPU 1: Modules linked in: sco bridge stp bnep rfcomm l2cap bluetooth ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit af_packet binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device ppdev vmnet(N) parport_pc parport vmblock(N) vmci(N) vmmon(N) nls_utf8 cifs(X) ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod snd_hda_intel snd_pcm snd_timer video snd_page_alloc snd_hwdep tg3 output intel_agp iTCO_wdt i2c_i801 snd wmi nvidia(PN) button rtc_cmos libphy battery ac sr_mod rtc_core i2c_core pcspkr iTCO_vendor_support dcdbas(X) rtc_lib cdrom soundcore sg joydev usbhid hid ff_memless sd_mod uhci_hcd ehci_hcd crc_t10dif usbcore edd ext3 mbcache jbd fan ata_piix ahci libata scsi_mod dock thermal processor thermal_sys hwmon Supported: No Pid: 0, comm: swapper Tainted: P 2.6.27.7-3-default #1 RIP: 0010:[<ffffffffa000a3af>] [<ffffffffa000a3af>] acpi_idle_enter_bm+0x32b/0x3b5 [processor] RSP: 0018:ffff88011fb5bec8 EFLAGS: 00000282 RAX: 0000000000000002 RBX: 0000000000f87d99 RCX: 00000d2be0a59f94 RDX: 0000000000000000 RSI: 00000d2be0637013 RDI: ffff88002803c500 RBP: 0000000000000000 R08: 0000000000000002 R09: ffffffff805ea858 R10: 00000000ffffffff R11: ffffffff8021c6ed R12: ffffffff8025a22c R13: ffffffff8071b654 R14: 0000000000000000 R15: 0000000000001020 FS: 0000000000000000(0000) GS:ffff88011facf340(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007f9fe1f1a000 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff80418ca5>] cpuidle_idle_call+0x95/0xd3 [<ffffffff8020b3b5>] cpu_idle+0xa9/0xf1 Any ideas on how to get rid? Basically, the machine continues to work, I don't really 'feel' anything being wrong when this happens... (well, my mouse stutters for a few seconds...) Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Adding repositories
by manchette 19 Dec '08

19 Dec '08

Hello, is there an easy way to save the sources i have in opensuse 11 to use them in 11.1 ? Export / Import or something ? Thanks Fabrice -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 4

[opensuse-factory] Another bug.
by Fred A. Miller 19 Dec '08

19 Dec '08

I know this has been discussed before, but at that time, I didn't notice the bug. On this laptop, 11.1RC won't syn. with a NTP server and keep the correct time. Has this been fixed yet? Fred -- "I believe that banking institutions are more dangerous to our liberties than standing armies. If the American people ever allow private banks to control the issue of their currency, first by inflation, then by deflation, the banks and corporations that will grow up around the banks will deprive the people of all property until their children wake-up homeless on the continent their fathers conquered." Thomas Jefferson, 1802 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 6

[opensuse-factory] Re: [opensuse] Windoze installation
by Richard 18 Dec '08

18 Dec '08

On Thu December 18 2008 6:20:15 pm Steve Jeppesen wrote: > On Thu, 18 Dec 2008 16:28:25 -0500 > Richard <ricreig(a)gmail.com> wrote: > > > Here's the rub, his machine has NO DVD or CD. > > Are you saying that his computer cannot accept a CD or DVD as well? If > the computer can house a DVD player/burner, why not install one? > > That would be the easiest solution and would add to their computing > experience in the long run. > His MBd has a toasted IDE controller or I'd have already done that. It also has a built in SATA controller which he currently uses. He doens't want to toss an otherwise good MBd with quad core 4ghz cpu and 4 SATA drives in the box. He is willing to clean a drive for Linux and once he is familiar with SuSE, even to wipe Doze completely based on what he's seen on my systems, but for the moment, a DVD/CD is not part of the equation, much to my chagrin. The solution must involve USB, or a Doze program that can load/install Linux on a spare partition or if I can figure out PXE and his NIC supports it, maybe that becomes an option but I am in very early stages of trying to see how that might work. I wish his MBd had a working IDE controller, to be sure that would make it simpler, but if it was simple, there would be no challange now would there <grin>? Richard -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Czech Packagers Team meeting minutes 2008-12-09
by Pavol Rusnak 18 Dec '08

18 Dec '08

Czech Packagers Team meeting minutes 2008-12-09 =============================================== Present: anicka mhrusecky mkudlvasr mseben mvyskocil nadvornik pgajdos prusnak puzel sbrabec Minutes: prusnak Topics: (1) MySQL plugins (2) Status reports (1) MySQL plugins ================= Mhrusecky told us about packaging of the new release of MySQL. MySQL 5.1 can be compiled with some of the storage backends as a plugin. Question arises whether to build MySQL with most of the possible storage backends included or whether to build support for most storage backends as a plugin so people can choose what backend would they like to use and enable only that one. Other related question is whether we should as a part of SUSE integration enable all plugins by default. Michal would expect that the most of ordinary users may be confused by existence of plugins and they wouldn't know how to enable them so they will appreciate automatic module loading after installation of plugin package. On the other hand experienced users may dislike this idea. (2) Status reports ================== anicka - openssh: work on bugs (#436352, #448775, #439744, #456494, #458364) mvyskocil - big update of Sun Java 1.4.2 sr19, Sun Java 1.5.0 u17 and Sun Java 1.6.0 u11 - command-not-found performance issues on opensuse-factory and submitted a manual page for c-n-f handler to git repository - become a reviewer(maintaner) of openSUSE:Contrib - fixed a files ownership of gle-graphics in openSUSE:Contrib pgajdos: * worked on #457554 -- xpdf crashes at "full screen" * worked on #457593 -- HDF5: Fortran module missing prusnak - added 8 packages to Contrib - updated scout in BuildService puzel - work on Contrib (submitted two packages, one reviewed) - parted: work on #456674 sbrabec balsa: Debugging bnc#450283. OpenOffice: Helping to debug bnc#443467. nspluginwrapper: Update (bnc#447434). avahi: Finished fix of bnc#456418. gftp: Working on bnc#434109, fixing bnc#160978 (and update for Factory). FATE#301344: Implemented tbz method, work-flow test with translation team. -- Best Regards / S pozdravom, Pavol RUSNAK SUSE LINUX, s.r.o Package Maintainer Lihovarska 1060/12 PGP 0xA6917144 19000 Praha 9, CR prusnak[at]suse.cz http://www.suse.cz -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] http://news.opensuse.org/ has no relnotes link
by Felix Miata 18 Dec '08

18 Dec '08

Where are the 11.1 release notes? Are they secret? Link is also missing from http://software.opensuse.org/ -- "Unless the Lord builds the house, its builders labor in vain." Psalm 127:1 NIV Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] making USB devices visible to VirtualBox
by Sid Boyce 18 Dec '08

18 Dec '08

I've googled and tried many things, but none work. # mount|grep usb usbfs on /proc/bus/usb type usbfs (rw,devgid=46,devmode=664,) /dev/bus/usb on /proc/bus/usb type none (rw,bind) Appreciate any suggestions. VirtualBox 2.0.6 and previous versions all affected. message: Could not load the Host USB Proxy Service (VERR_FILE_NOT_FOUND) The service might be not installed on the host computer. Result Code: NS_ERROR (0x00004005) Component: Host etc. lsusb on the running VM shows the 2 hubs with the same vendor:poduct ID's. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 1

[opensuse-factory] Accessing the package Management Failed (after unsuccessful terminate of y2base)
by z 18 Dec '08

18 Dec '08

Some description: go to yast software management, choose "installation summary" filter, and check "not install" checkbox. this will result in hangup of y2base for few minutes - list of packages is too long. I close window and kwin offers me to terminate process y2base, because it is unresponsive. After that i try to access yast SW management again, and got "Accessing the package Management Failed", it is still locked by prevoius y2base process, which was not terminated. Thereby 2 questions: 1) Locking y2base process: can it be prevented? i mean can be given possibility to interrupt such long indexing process harmlessly? 2) What part in my case is responsible for correct terminating of unresponsive process? kwin? And why process was not terminated correctly? Thanks in advance. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] switch mail-list for 11.1 after release?
by z 18 Dec '08

18 Dec '08

Hi, list. opensuse factory mail-list would be the wrong place for discussing oS 11.1 after it leaves factory state, and go release? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

Re: Supported scenarios for bootloader installation (was: Re: [opensuse-factory] XFS Boot Problem)
by Rob OpenSuSE 17 Dec '08

17 Dec '08

Recently joined the list and read this thread in the archive, sorry I can't mend the threading. Comments on fsck(8) times on boot : The fsck time increase greatly with the size of the filesystem, especially once the data structures no longer fit into RAM, but end up using swap. A kernel modification to break a filesystem into chunks, for faster independant verification within the partition, was under development but I'm not sure if it made mainline use yet. By using a multiple file systems (and having generous RAM), I've not had issues with very slow fsck boot times, on my installations, but have seen the problem on servers installed by others. You could use init.d script, to mount certain large data file systems on boot (use noauto in fstab(5)), and also unmount with periodic fscks on shutdown to avoid long boot times. Windows systems suffer the same problem, only they tend not to have any integrity checks made without user intervention, and the first sign of trouble is boot failures or data corruption. For laptops, defining an adequate swap space and using the hibernate and resume features, makes more sense. Windows does have an advantage here, in that sleep, hibernate & resume are maturer, and have to be tested by Manufacturer pre-sale before a model is launched. Commentings on http://lists.opensuse.org/opensuse-factory/2008-12/msg00067.html Jiri Srain said : "The reason why reiserfs is not mentioned is its complexity; for booting, you should prefer a filesystem which is as simple as possible to avoid problems which Josef posted in regard of XFS. Even though I'm not aware of any single case when reiserfs didn't work for booting, our goal was to define scenarios which we believe that will keep working in the future. I still remember that when reiserfs was introduced, the only way to use it for booting was to disable sharing of a sector by tails of multiple files (notail option). " Some comments on the reasons for recommended practice, on /boot partions, remembering those times to. SuSE introduced this fast jornalled filesystem into 2.2 (either a late 6.X release of 7.0); and reiserfs was the only journalled filesystem to make into the mainline 2.4.0 kernel (somewhat controversially at last minute, but thanks Linus!). GRUB got introduced a bit later, I think in SuSE-8.X. reiserfs and the VM, were far more stable under SuSE, than other popular distro's, because some patches weren't included in mainline, with RedHat's kernel team for instance committed to subsystems developed and maintained by their inhouse teams. ext2 was recommended for /boot because it lacked a journal file. /boot as a seperate partition was made small, perhaps only 32-64MiB, so a journal taking 1/3-1/2 space was rather wasteful. A small seperate /boot was fast to fsck(8) and load, and avoided any BIOS issues with cylinders falling above 1024. BIOSes were very, very flakey and generally only tested with DOS/WIN9X. reiserfs being fairly new, wasn't recognised by some common rescue disks. "notails" to avoid files packed into blocks, was due to LILO working with LBA blocks, not the filesystem. reiserfs disk layout and code, was not nearly so stable. Future updates might occur and break GRUB, until it's code was updated. GRUB did understand the filesystems, but some like (ext2) were better tested than others. It is perfectly possible to mount /boot ro, or have it as noauto during normal use, to avoid fscks and accidents like deleting (overwriting) the running kernel. Unfortunately the kernel update mechanism, did not fail gracefully if /boot unmounted, and bug reports seemed to be ignored. So until there's more sanity checking for the kernel update (not sure if it's a YaST2 or kernel rpm issue) it's better to mount /boot conventionally. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] how to rsync factory sources?
by Toni Harbaugh-Blackford 17 Dec '08

17 Dec '08

Hi- I would like to rsync the factory sources down with my local copy of factory. But the structure of factory has changed so that the sources are not readily available. I have tried rsync.opensuse.org, but I can't find the sources under any of the available options: opensuse-hotstuff-160gb The most requested stuff that fits into 160 gigabytes opensuse-hotstuff-80gb The most requested stuff that fits into 80 gigabytes opensuse-updates Official updates for released openSUSE distributions opensuse-full The download.opensuse.org tree starting at /pub without daily devel snapshots opensuse-full-with-factory The download.opensuse.org tree starting at /pub including daily devel snapshots opensuse-full-with-factory-dvd5 The download.opensuse.org tree starting at /pub including daily devel snapshots and large, short-lived Beta DVDs opensuse-full-with-factory-drpmsync The download.opensuse.org tree starting at /pub including daily devel snapshots, and drpmsync tree buildservice-repos The repositories from the openSUSE build service buildservice-repos-main The repositories from the openSUSE build service without the home: directories opensuse-tube Videos hosted on tube.opensuse.org How do I rsync the factory sources? Thanks, Toni ------------------------------------------------------------------- Toni Harbaugh-Blackford Advanced Biomedical Computing Center (ABCC) National Cancer Institute -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Kaffeine
by Fred A. Miller 16 Dec '08

16 Dec '08

Has anyone else noticed that Kaffeine is "broken," that is - after updates awhile ago it's "busted" and won't play DVDs....BOTH 11.0 and 11.1?! I have packman at priority 120....still it's broken. Thanks, Fred -- "Politicians and diapers need to be changed regularly -- and for the same reason." -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 7

[opensuse-factory] Feedback
by Javier Llorente 16 Dec '08

16 Dec '08

Hello everyone, Feedback regarding openSUSE 11.1 RC 1: I would like to be able to right click on a tar.gz/tar.bz2/zip/etc file and unzip wherever it is located. I could do that on previous openSUSE releases. Today I have upgraded my openSUSE 11.1 RC 1 system to the latest kernel update and my default grub entry was changed to floppy. This shouldn't have happened. The KDE updater applet is unable to install updates. It always exits with "An error occurred." I have to use YaST or zypper to keep my system up- to-date. Speaking of YaST, if you launch YaST and switch to repositories, it takes a while to load the list of repositories, which btw, not all of them are shown since this movable separator is way too high. Other than that, it's looking good. :) Greetings, Javier -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

11 17

[opensuse-factory] Phoronix' find openSUSE 11.1 the slowest on Intel Atom platform
by Birger Kollstrand 16 Dec '08

16 Dec '08

Hi, http://www.phoronix.com/vr.php?view=13259 I just read this article on Phoronix. Is some of the SW in openSUSE running with debug in some cases ? Two tests stick out as very bad: http://www.phoronix.com/scan.php?page=article&item=intel_atom_four&num=3 and http://www.phoronix.com/scan.php?page=article&item=intel_atom_four&num=5 Regards Birger -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] status openSUSE 11.1
by Stephan Kulow 16 Dec '08

16 Dec '08

Hi, You may wonder why you haven't heared from me - but I'm stil alive. The status of 11.1 is pretty short: it's cursed. The GM was supposed to be done on thursday last week, but late on tuesday we found that the rpm headers in the 11.1 project were all wrong and so we rebuilt all packages, which took till friday due the build service playing hard to get. Then I released a GMC and we fixed 5 urgent problems to have a GM on monday - so I thought. Casual J. noticed in #457095 that the download DVD miss the "check installation medium" boot entry - which was really important to get back, so tuesday. This morning I noticed that the images for the installation contain files they really should not contain and so we had redo the DVDs one more time. But we decided to ship the retail DVD even with this bug to the fab. And this afternoon we noticed that a non-standard 11.0 update (well, one that is standard 11.0 + acroread installed) on x86_64 will leave the system unusable. This bug (bnc#457564 if you like reading horror storries) made us redo 110(!) packages + resend the DVDs to the fab. So we're here still without GM - but fortunately still 9 days to go for public download. Stay tuned :) Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

13 18

[opensuse-factory] lost all "System" programs in gnome menu
by Putrycz, Erik 15 Dec '08

15 Dec '08

After some zypper and a bad reboot, I lost all the programs from the "start" menu on the right in the "system" category including the logout and others. Any way to restore them easily? Erik. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] all manpages broken?
by Felix Möller 15 Dec '08

15 Dec '08

Hi, is it again just me or all manpages missing dashes? I looked at "man setfacl" which was missing the dashes in front of all options. Now I looked at "man bash" and "man ls" and they are all missing the "-" in front of all options. anybody else seeing this? Or can anybody find a bugreport for this? regards Felix Möller -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 7

[opensuse-factory] Pidgin 2.5.2?
by Nathan Moschkin 15 Dec '08

15 Dec '08

Is there no 2.5.2 build of pidgin for openSUSE 11? I tried building it myself, but there seems to be some form of library conflict I can't figure out. Thanks! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] HDTV - Mode Not Supported
by Steven 13 Dec '08

13 Dec '08

Hello everyone, I have a fresh installation of 11.1 RC1 64-bit. The installation goes great, as does the loading screen after installation. Once it gets to the desktop, however, my display (Samsung 40" 1080p HDTV) goes blank and displays "mode not supported". I tried installing the ATI drivers (8.11) but this made no difference. Currently I'm using a little Samsung 15" LCD until the HDTV gets working. A note of interest however, the 15" LCD does not display the correct resolution either, it defaults to 800x600 (native is 1024x768). Any changes I make to the display (via 'Configure Desktop') are not saved. Hardware: AMD Phenom 9950 BE Gigabyte MA790GP-DS4H 4GB RAM ATI Radeon HD 3300 (Integrated graphics) Samsung 40" 1080p HDTV (connected via HDMI) If any other info is required let me know. --Steve -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] 11.1 install barfson images
by peter nikolic 12 Dec '08

12 Dec '08

Hi . Just tried to install Opensuse 11.1RC1 on my laptop it keeps barfing when trying to use images to install if i disable images it installs fine the complaints i get are about LZM errors and unable to delete file **** Apart from that it seems ok so far apart from that darn KDE4 stuff Pete . -- SuSE Linux 10.3-Alpha3. (Linux is like a wigwam - no Gates, no Windows, and an Apache inside.) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Which repo to use for updater testing in 11.2A.0?
by Oddball 12 Dec '08

12 Dec '08

Hi, replacing: the'.1' with '.2', does not seem to work;) http://download.opensuse.org/update/11.1/ -- Enjoy your time around, Oddball (M9.) (Now or never...) OS: Linux 2.6.27.7-8-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.2 Alpha 0 (x86_64) KDE: 4.1.3 (KDE 4.1.3) "release 4.6" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

8 15

[opensuse-factory] opensuse 11.1 RC1 network install CD doesn't work
by Mindaugas Vaiciulis 12 Dec '08

12 Dec '08

Tried to install 11.1 RC1 from network install CD today and failed. https://bugzilla.novell.com/show_bug.cgi?id=458602 -- Mindaugas Vaiciulis -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1