May 2024 - openSUSE Factory - openSUSE Mailing Lists

Question about build
by Larry Finger 03 May '24

03 May '24

When I build VirtualBox using osc, I get the following WARNING: [ 15s] WARNING could not set SOURCE_DATE_EPOCH, ensure BUILD_RELEASE is set in /.buildenv I have not found any description of the contents of .buildenv. I do notice that OBS has a file _buildenv, but it does not define BUILD_RELEASE. Is that the same file? Are either file described any place that is accessible? Thanks, Larry

2 1

Need a sanity check re: efivarfs
by Jim Henderson 03 May '24

03 May '24

I'm working on an issue with my System76 system not being able to apply the firmware update that updates the UEFI dbx to version 371 (the version that resolves the issue resulting from the discovery of the BlackLotus UEFI bootkit). The issue I'm having is that efivarfs is running out of space. I'm being advised to increase the size of my UEFI partition - which is 4 GB and has 158 MB free - for a firmware update that is 21.2 KB in size, and the output from fwupdmgr is telling me that efivarfs doesn't have enough free space (it has 20KB free). There's nothing in the messages that suggests that I need additional space in the UEFI partition on my system - the specific message I get is: failed to write data to efivarfs: Error writing to file descriptor: No space left on device There's no reason to be messing about with my UEFI partition at all, is there? (They had also suggested using efibootmgr to remove some entries, and that does clear out some of the Boot0* files in /sys/firmware/efi/ efivars - but not enough). The issue is with the constraints in the nvram where this data is stored itself, and not the UEFI boot partition on my SSD, correct? Just want to make sure I'm completely understanding the message I'm seeing. (As a "bonus question", messing around with just deleting stuff like the dbx files in efivarfs could potentially brick the system, right?) -- Jim Henderson Please keep on-topic replies on the list so everyone benefits

6 42

krdc has been seriously broken since plasma6
by Joe Salmeri 02 May '24

02 May '24

krdc has been seriously broken since plasma6 reached TW, meanwhile xfreerdp has no problems connecting. This is still true as of 20240430. It seems that users of other distros have had success going back from krdc version 24.02 to 23.8. Any way that krdc 23.8 could be made available again ? Previously I reported that krdc just displayed a blue screen on connection but that was with 20240329 it has gotten worse with new builds. Now it just segfaults but there seem to be multiple issues related to the breakage. joe@twlatest:~> krdc rdp://joe@rdptemp kf.coreaddons: The plugin "/usr/lib64/qt6/plugins/krdc/libkrdc_rdpplugin.so" explicitly states an Id in the embedded metadata, which is different from the one derived from the filename The Id field from the KPlugin object in the metadata should be removed kf.coreaddons: The plugin "/usr/lib64/qt6/plugins/krdc/libkrdc_testplugin.so" explicitly states an Id in the embedded metadata, which is different from the one derived from the filename The Id field from the KPlugin object in the metadata should be removed kf.coreaddons: The plugin "/usr/lib64/qt6/plugins/krdc/libkrdc_vncplugin.so" explicitly states an Id in the embedded metadata, which is different from the one derived from the filename The Id field from the KPlugin object in the metadata should be removed qt.core.qobject.connect: QObject::connect: No such signal KBookmarkManager::changed(QString,QString) Segmentation fault (core dumped) -- Regards, Joe

2 3

time64 ABI fix coming to upstream glibc
by Florian Weimer 02 May '24

02 May '24

The <utmp.h> and <utmp.h> headers had a bug that the on-disk structures defined there could change size on some targets when _TIME_BITS was set to 64. This is obviously wrong because the files are not going to magically change their layout because the application accessing them was built in a specific way. We're going to fix this in glibc upstream on the stable release branches, going all the way back to glibc 3.34 (the first release with this kind of time64 support). After the fix, the _TIME_BITS definition will no longer impact struct layout. Usually, that means epoch fields are 32-bits wide, to match co-installable architectures. To extend the usable life-time of these interfaces somewhat, glibc 2.40 changes epoch fields to unsigned types in these structures. This change is specific to the upcoming glibc 2.40 release, I do not plan to backport it. Thanks, Florian

4 3

New Tumbleweed snapshot 20240430 released!
by Dominique Leuenberger 02 May '24

02 May '24

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: fwupd (1.9.16 -> 1.9.18) gnome-music gnome-shell gnome-tweaks gobject-introspection gtk2 jasper (4.2.3 -> 4.2.4) kernel-firmware-nvidia-gspx-G06 (550.76 -> 550.78) kernel-source (6.8.7 -> 6.8.8) liblouis (3.25.0 -> 3.29.0) libproxy-backend (0.5.5 -> 0.5.6) libproxy-client (0.5.5 -> 0.5.6) mutter nvidia-open-driver-G06-signed (550.76_k6.8.6_1 -> 550.78_k6.8.8_1) openSUSE-release (20240429 -> 20240430) patterns-base python-networkx (3.1 -> 3.3) python-pip (23.3.2 -> 24.0) python-scipy (1.11.4 -> 1.13.0) xconsole (1.0.8 -> 1.1.0) yast2-trans (84.87.20240421.63804708b7 -> 84.87.20240428.f3ddce30c5) === Details === ==== fwupd ==== Version update (1.9.16 -> 1.9.18) Subpackages: fwupd-bash-completion fwupd-lang libfwupd2 typelib-1_0-Fwupd-2_0 - Update to version 1.9.18: + Fix a small memory leak in fwupdmgr. + Use simple allow-listing for the syscall filter. - Changes from version 1.9.17: + This release fixes the following bugs: - Capture device status changes when in bootloader mode. - Change the systemd SystemCallFilter to an allowlist. - Detect when a CCGX dock forbids downgrade. - Do not add an overly-generic instance ID to CrosEC devices. - Do not read OptionROM verification data on Apple hardware. - Emit a signal when a user-request is no longer valid. - Fix a potential crash when parsing invalid CBOR data. - Properly show SPDX project licenses with AND as a delimiter. - Verify that syscalls are being filtered correctly at startup. + This release adds support for the following hardware: - Asus DC201. - Realtek Gen1 RTS541x. ==== gnome-music ==== Subpackages: gnome-music-lang - remove dependency on /usr/bin/python3 using %python3_fix_shebang macro, [bsc#1212476] ==== gnome-shell ==== Subpackages: gnome-extensions gnome-shell-calendar gnome-shell-lang - remove dependency on /usr/bin/python3 using %python3_fix_shebang macro, [bsc#1212476] ==== gnome-tweaks ==== Subpackages: gnome-tweaks-lang - remove dependency on /usr/bin/python3 using %python3_fix_shebang macro, [bsc#1212476] ==== gobject-introspection ==== Subpackages: girepository-1_0 libgirepository-1_0-1 - remove dependency on /usr/bin/python3 using %python3_fix_shebang macro, [bsc#1212476] ==== gtk2 ==== Subpackages: gtk2-data gtk2-immodule-xim gtk2-lang gtk2-tools libgtk-2_0-0 - remove dependency on /usr/bin/python3 using %python3_fix_shebang macro, [bsc#1212476] ==== jasper ==== Version update (4.2.3 -> 4.2.4) - Update to 4.2.4: * Added some missing checks to the jas_heic_decode function in the HEIC codec (#383). ==== kernel-firmware-nvidia-gspx-G06 ==== Version update (550.76 -> 550.78) - Update to 550.78 * addresses boo#1223454 ==== kernel-source ==== Version update (6.8.7 -> 6.8.8) - Linux 6.8.8 (bsc#1012628). - thunderbolt: Reset only non-USB4 host routers in resume (bsc#1012628). - ksmbd: common: use struct_group_attr instead of struct_group for network_open_info (bsc#1012628). - ksmbd: clear RENAME_NOREPLACE before calling vfs_rename (bsc#1012628). - ksmbd: validate request buffer size in smb2_allocate_rsp_buf() (bsc#1012628). - ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf (bsc#1012628). - net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards (bsc#1012628). - net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530 (bsc#1012628). - fork: defer linking file vma until vma is fully initialized (bsc#1012628). - nilfs2: fix OOB in nilfs_set_de_type (bsc#1012628). - Squashfs: check the inode number is not the invalid value of zero (bsc#1012628). - bootconfig: use memblock_free_late to free xbc memory to buddy (bsc#1012628). - nouveau: fix instmem race condition around ptr stores (bsc#1012628). - drm/vmwgfx: Fix crtc's atomic check conditional (bsc#1012628). - drm/vmwgfx: Sort primary plane formats by order of preference (bsc#1012628). - drm/vmwgfx: Fix prime import/export (bsc#1012628). - drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init (bsc#1012628). - drm/ttm: stop pooling cached NUMA pages v2 (bsc#1012628). - drm/amdgpu: remove invalid resource->start check v2 (bsc#1012628). - drm/amdkfd: Fix memory leak in create_process failure (bsc#1012628). - drm/amdgpu: validate the parameters of bo mapping operations more clearly (bsc#1012628). - fuse: fix leaked ENOSYS error on first statx call (bsc#1012628). - mm/shmem: inline shmem_is_huge() for disabled transparent hugepages (bsc#1012628). - mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled (bsc#1012628). - mm,swapops: update check in is_pfn_swap_entry for hwpoison entries (bsc#1012628). - mm/userfaultfd: allow hugetlb change protection upon poison entry (bsc#1012628). - mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly (bsc#1012628). - init/main.c: Fix potential static_command_line memory overflow (bsc#1012628). - arm64: hibernate: Fix level3 translation fault in swsusp_save() (bsc#1012628). - arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H (bsc#1012628). - KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status (bsc#1012628). - KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes (bsc#1012628). - KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms (bsc#1012628). - KVM: x86/pmu: Disable support for adaptive PEBS (bsc#1012628). - KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible (bsc#1012628). - sched: Add missing memory barrier in switch_mm_cid (bsc#1012628). - fs: sysfs: Fix reference leak in sysfs_break_active_protection() (bsc#1012628). - speakup: Avoid crash on very long word (bsc#1012628). - mei: me: disable RPL-S on SPS and IGN firmwares (bsc#1012628). - mei: vsc: Unregister interrupt handler for system suspend (bsc#1012628). - usb: typec: tcpm: Correct the PDO counting in pd_set (bsc#1012628). - usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error (bsc#1012628). - usb: Disable USB3 LPM at shutdown (bsc#1012628). - usb: dwc2: host: Fix dereference issue in DDMA completion flow (bsc#1012628). - Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" (bsc#1012628). - Revert "usb: cdc-wdm: close race between read and workqueue" (bsc#1012628). - USB: serial: option: add Telit FN920C04 rmnet compositions (bsc#1012628). - USB: serial: option: add Rolling RW101-GL and RW135-GL support (bsc#1012628). - USB: serial: option: support Quectel EM060K sub-models (bsc#1012628). - USB: serial: option: add Lonsung U8300/U9300 product (bsc#1012628). - USB: serial: option: add support for Fibocom FM650/FG650 (bsc#1012628). - USB: serial: option: add Fibocom FM135-GL variants (bsc#1012628). - serial: core: Fix missing shutdown and startup for serial base port (bsc#1012628). - serial: core: Clearing the circular buffer before NULLifying it (bsc#1012628). - serial: core: Fix regression when runtime PM is not enabled ... changelog too long, skipping 185 lines ... - commit 5cd3298 ==== liblouis ==== Version update (3.25.0 -> 3.29.0) Subpackages: liblouis-data liblouis20 python3-louis - Update to version 3.29.0: + Many changes. See NEWS. ==== libproxy-backend ==== Version update (0.5.5 -> 0.5.6) - Update to version 0.5.6: + Support XDP Desktop Portal proxy resolver. ==== libproxy-client ==== Version update (0.5.5 -> 0.5.6) - Update to version 0.5.6: + Support XDP Desktop Portal proxy resolver. ==== mutter ==== Subpackages: mutter-lang - Add 0001-Revert-clutter-stage-Avoid-queueing-stage-updates-wh.patch: Reverting commit 261f516a to fix black screen on Xorg when logging in or logging out (glgo#GNOME/mutter#3452 bsc#1222612). ==== nvidia-open-driver-G06-signed ==== Version update (550.76_k6.8.6_1 -> 550.78_k6.8.8_1) - Update to 550.78 * addresses boo#1223454 ==== openSUSE-release ==== Version update (20240429 -> 20240430) Subpackages: openSUSE-release-appliance-custom openSUSE-release-dvd - automatically generated by openSUSE-release-tools/pkglistgen ==== patterns-base ==== Subpackages: patterns-base-apparmor patterns-base-base patterns-base-basesystem patterns-base-basic_desktop patterns-base-console patterns-base-enhanced_base patterns-base-minimal_base patterns-base-selinux patterns-base-sw_management patterns-base-transactional_base patterns-base-x11 patterns-base-x11_enhanced - Update Summary for generic_desktop pattern: make clear that this is based on IceWM (boo#1221320). ==== python-networkx ==== Version update (3.1 -> 3.3) - Update to 3.3 * Add @nx._dispatch decorator to most algorithms * Remove topo_order kwarg from is_semiconnected without deprecation * API: Add a decorator to deprecate positional args * Drop support for Python 3.8 and 3.9 * Support Python 3.12 * Test on Python 3.13-dev * Don't test numpy2 nightlies * Unpin scipy upperbound for tests * Disallow negative number of nodes in complete_multipartite_graph * [A-star] Added expansion pruning via cutoff if cutoff is provided * Add Tadpole graph * [Feat] Random expanders utilities * Add Kirchhoff index / Effective graph resistance * Changed return types of shortest path methods to improve consistency * Many more changes, see upstream changelog - drop doc build, PyPI tarball doesn't support it anymore ==== python-pip ==== Version update (23.3.2 -> 24.0) - update to 24.0: * Retry on HTTP status code 502 * Automatically use the setuptools PEP 517 build backend when - -config-settings is used for projects without pyproject.toml. * Make pip freeze and pip uninstall of legacy editable installs of packages whose name contains _ compatible with setuptools>=69.0.3. * Support per requirement --config-settings for editable installs. * Optimized usage of --find-links=<path-to-dir>, by only scanning the relevant directory once, only considering file names that are valid wheel or sdist names, and only considering files in the directory that are related to the install. * Removed wheel from the [build-system].requires list fallback that is used when pyproject.toml is absent. * Upgrade distlib to 0.3.8 * Fix explanation of how PIP_CONFIG_FILE works * Fix outdated pip install argument description in documentation. * Replace some links to PEPs with links to the canonical specifications on the :doc:`pypug:index` * Updated the pyproject.toml document to stop suggesting to depend on wheel as a build dependency directly. * Update supported interpreters in development docs * Most project metadata is now defined statically via pip's pyproject.toml file. ==== python-scipy ==== Version update (1.11.4 -> 1.13.0) - Skip another test out of numeric precision for 32-bit - Fix HPC _version - Update to 1.13.0 [#]# Highlights of this release * Support for NumPy 2.0.0. * Interactive examples have been added to the documentation, allowing users to run the examples locally on embedded Jupyterlite notebooks in their browser. * Preliminary 1D array support for the COO and DOK sparse formats. * Several scipy.stats functions have gained support for additional axis, nan_policy, and keepdims arguments. scipy.stats also has several performance and accuracy improvements. [#]# New features * scipy.integrate improvements * scipy.io improvements * scipy.interpolate improvements * scipy.signal improvements * scipy.sparse improvements * scipy.spatial improvements * scipy.special improvements * scipy.stats improvements [#]# Deprecated features * Complex dtypes in PchipInterpolator and Akima1DInterpolator have been deprecated and will raise an error in SciPy 1.15.0. If you are trying to use the real components of the passed array, use np.real on y. [#]# Other changes * The second argument of scipy.stats.moment has been renamed to order while maintaining backward compatibility. - Release 1.12.0 [#]# Highlights of this release * Experimental support for the array API standard has been added to part of scipy.special, and to all of scipy.fft and scipy.cluster. There are likely to be bugs and early feedback for usage with CuPy arrays, PyTorch tensors, and other array API compatible libraries is appreciated. Use the SCIPY_ARRAY_API environment variable for testing. * A new class, ShortTimeFFT, provides a more versatile implementation of the short-time Fourier transform (STFT), its inverse (ISTFT) as well as the (cross-) spectrogram. It utilizes an improved algorithm for calculating the ISTFT. * Several new constructors have been added for sparse arrays, and many operations now additionally support sparse arrays, further facilitating the migration from sparse matrices. * A large portion of the scipy.stats API now has improved support for handling NaN values, masked arrays, and more fine-grained shape-handling. The accuracy and performance of a number of stats methods have been improved, and a number of new statistical tests and distributions have been added. [#]# New features * scipy.cluster improvements * scipy.fft improvements * scipy.integrate improvements * scipy.interpolate improvements * scipy.linalg improvements * scipy.ndimage improvements * scipy.optimize improvements * scipy.signal improvements * scipy.sparse improvements * scipy.spatial improvements * scipy.special improvements * scipy.stats improvements [#]# Deprecated features * Error messages have been made clearer for objects that donât exist in the public namespace and warnings sharpened for private attributes that are not supposed to be imported at all. * scipy.signal.cmplx_sort has been deprecated and will be removed in SciPy 1.15. A replacement you can use is provided in the deprecation message. * Values the argument initial of scipy.integrate.cumulative_trapezoid other than 0 and None are now deprecated. * scipy.stats.rvs_ratio_uniforms is deprecated in favour of scipy.stats.sampling.RatioUniforms * scipy.integrate.quadrature and scipy.integrate.romberg have been deprecated due to accuracy issues and interface shortcomings. They will be removed in SciPy 1.15. Please use scipy.integrate.quad instead. * Coinciding with upcoming changes to function signatures (e.g. removal of a deprecated keyword), we are deprecating positional use of keyword arguments for the affected functions, which will raise an error starting with SciPy 1.14. In some cases, this has delayed the originally announced removal date, to give time to respond to the second part of the deprecation. Affected functions are: - linalg.{eigh, eigvalsh, pinv} - integrate.simpson - signal.{firls, firwin, firwin2, remez} - sparse.linalg.{bicg, bicgstab, cg, cgs, gcrotmk, gmres, lgmres, minres, qmr, tfqmr} - special.comb - stats.kendalltau * All wavelet functions have been deprecated, as PyWavelets provides suitable implementations; affected functions are: signal.{daub, qmf, cascade, morlet, morlet2, ricker, cwt} * scipy.integrate.trapz, scipy.integrate.cumtrapz, and scipy.integrate.simps have been deprecated in favour of ... changelog too long, skipping 30 lines ... find workaround for failing HPC build gh#scipy/scipy#20535 ==== xconsole ==== Version update (1.0.8 -> 1.1.0) - Update to version 1.1.0 * This release fixes use of the scroll wheel in the text area, adds -version and -help options, and removes support for several older OS'es. ==== yast2-trans ==== Version update (84.87.20240421.63804708b7 -> 84.87.20240428.f3ddce30c5) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20240428.f3ddce30c5: * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Japanese) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian)

3 2

No Maintainer Response from devel:languages:misc
by Gordon Leung 01 May '24

01 May '24

Hello everyone, Can someone accept this SR? If you look through the superseded requests its about 2-3 weeks now and 3 staging bot mass pings of 11 devel proj maintainers https://build.opensuse.org/request/show/1170637 Thanks, Pi-Cla

1 0

Dependency issue updating to TW snapshot 20240425
by Rodney Baker 01 May '24

01 May '24

Hi all, After being away from home for a week, just ran zypper dup on my TW box running snapshot 20240416 to upgrade to 20240425. Virt-v2v is complaining about a dependency on btrfsprogs. Is this a real dependency or just a suggestion (or just wrong)? ---------------- Problem: 1: the to be installed virt-v2v-2.4.0-5.1.x86_64 requires 'btrfsprogs', but this requirement cannot be provided not installable providers: btrfsprogs-6.8-416.9.i586[Tumbleweed_Filesystems] btrfsprogs-6.8-416.9.x86_64[Tumbleweed_Filesystems] btrfsprogs-6.8-1.2.x86_64[download.opensuse.org-oss] btrfsprogs-6.8-416.9.i586[filesystems] btrfsprogs-6.8-416.9.x86_64[filesystems] Solution 1: Following actions will be done: remove lock to allow installation of btrfsprogs-6.8-416.9.i586[Tumbleweed_Filesystems] install btrfsprogs-6.8-416.9.i586 despite the inferior architecture Solution 2: Following actions will be done: remove lock to allow installation of btrfsprogs-6.8-416.9.i586[filesystems] install btrfsprogs-6.8-416.9.i586 despite the inferior architecture Solution 3: deinstallation of virt-v2v-2.4.0-3.2.x86_64 Solution 4: keep obsolete virt-v2v-2.4.0-3.2.x86_64 Solution 5: remove lock to allow installation of btrfsprogs-6.8-416.9.x86_64[filesystems] Solution 6: remove lock to allow installation of btrfsprogs-6.8-1.2.x86_64[download.opensuse.org-oss] Solution 7: remove lock to allow installation of btrfsprogs-6.8-416.9.x86_64[Tumbleweed_Filesystems] Solution 8: break virt-v2v-2.4.0-5.1.x86_64 by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/3/4/5/6/7/8/c/d/?] (c): -------------- I have no btrfs file systems on any box I manage and I have all btrfs packages blocked from installation because I don't trust it (after having more than one system rendered unbootable/unrecoverable due to snapshots taking all available disk space and having no way to recover other than reformat/reinstall). This is the first time zypper has complained about btrfsprogs being a dependency for anything on the system. For now I chose option 8 - any better solutions? -- ========================================================================================================== Rodney Baker rodney.baker(a)outlook.com.au ==========================================================================================================

4 8