May 2022 - openSUSE Factory - openSUSE Mailing Lists

VirtualBox fails under kernel 5.18
by Larry Finger 25 May '22

25 May '22

VirtualBox fails to run correctly under kernel 5.18.0. I noticed a problem in the 5.18-rcX cycle and bisected the problem to commit 6e8ec2552c7d ("random: use computational hash for entropy extraction"). That commit has been confirmed as the one causing the problem. We now know the cause. The changes in the random number generator employ the SSSE3 instructions. which in turn affects the FPU. The current belief is that the VirtualBox vcpu is not saving the state of the FPU when a hard IRQ occurs. If any code using SSSE3 runs in the host during that interrupt, the state of the FPU in the guest is incorrect, and the guest gets a kernel exception. Thus far, the only kernel code using that instruction set is the random number generator. It is easy to test for this condition. In the guest start a multi-cpu build of the kernel, or some other large project. Within a few seconds, gcc will get an error. The attached patch will cause rng not to use SSSE3 instructions, thereby bypassing the problem. Generation of random numbers may be a bit slower, but have no loss of robustness. If possible, I would like the patch applied to 5.18.X kernels until Oracle fixes the problem. Finding the fault is beyond my understanding of the implementation of virtual CPUs. Larry Finger - openSUSE VirtualBox Maintainer

2 1

setting partition id with parted
by Arvin Schnell 25 May '22

25 May '22

Hi, for more than a decade parted on SUSE contains a patch to allow setting the partition id on MS-DOS. Unfortunately it was never accepted upstream. Recently upstream included an improved patch by SUSE that allows the same but with a different syntax. So instead of using set PART-NO type=0x42 the new syntax is type PART-NO 0x42 The value itself is available in the new JSON output (also contributed by SUSE). As a bonus the new command also works for GPT (setting the partition type GUID). I plan to remove the old patch in a few weeks (in Factory) since it causes trouble for at least one program. So if needed update your software. Thanks, Arvin -- Arvin Schnell, <aschnell(a)suse.com> Senior Software Engineer, Research & Development SUSE Software Solutions Germany GmbH Maxfeldstraße 5 90409 Nürnberg Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman

1 0

New Tumbleweed snapshot 20220523 released!
by Dominique Leuenberger 25 May '22

25 May '22

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: gnutls (3.7.4 -> 3.7.5) libxkbcommon (1.4.0 -> 1.4.1) mutter openldap2 openldap2-contrib-src plasma5-workspace python-sympy (1.8 -> 1.10.1) === Details === ==== gnutls ==== Version update (3.7.4 -> 3.7.5) Subpackages: libgnutls-dane0 libgnutls30 libgnutls30-32bit libgnutls30-hmac - update to 3.7.5: * add options disable session ticket usage in TLS 1.2 because it does not provide forward secrecy * For TLS 1.3 where session tickets do provide forward secrecy, the PFS priority string now only disables session tickets in TLS 1.2. * Future backward incompatibility: in the next major release of GnuTLS those flag and modifier are planned to be removed * gnutls-cli, gnutls-serv: Channel binding for printing information has been changed from tls-unique to tls-exporter as tls-unique is not supported in TLS 1.3. * Certificate sanity checks has been enhanced to make gnutls more RFC 5280 compliant: * Removed 3DES from FIPS approved algorithms * Optimized support for AES-SIV-CMAC algorithms * libgnutls: HKDF and AES-GCM algorithms are now approved in FIPS-140 mode when used in TLS ==== libxkbcommon ==== Version update (1.4.0 -> 1.4.1) Subpackages: libxkbcommon-x11-0 libxkbcommon0 libxkbcommon0-32bit libxkbregistry0 - Update to release 1.4.1 * Fix compose sequence overriding (common prefix) not working correctly. Regressed in 1.2.0. * Remove various bogus currency sign (particulary Euro and Korean Won) entries from the keysym <-> Unicode mappings. They prevented the real keysyms/codepoints for these from mapping correctly. ==== mutter ==== Subpackages: mutter-lang - Add mutter-crash-meta_context_terminate.patch: Fix SIGSEGV in meta_context_terminate (bsc#1199382 glgo#GNOME/mutter#2267). ==== openldap2 ==== Subpackages: libldap-data libldap2 libldap2-32bit openldap2-client - bsc#1199277 - Resolve segfault when calling new ctx with global ctx * 0017-Resolve-error-handling-in-new-ctx-when-global.patch ==== openldap2-contrib-src ==== - bsc#1199277 - Resolve segfault when calling new ctx with global ctx * 0017-Resolve-error-handling-in-new-ctx-when-global.patch ==== plasma5-workspace ==== Subpackages: gmenudbusmenuproxy plasma5-session plasma5-session-wayland plasma5-workspace-lang plasma5-workspace-libs xembedsniproxy - Add patch to fix appmenu text with certain themes (kde#453348): * 0001-applets-appmenu-fix-top-level-menu-text-coloration.patch - Add patch to also show themes with a newer metadata format (kde#453830): * 0001-kcms-desktoptheme-find-metadata.json-when-loading-Th.patch ==== python-sympy ==== Version update (1.8 -> 1.10.1) - Update to version 1.10.1. * Fixed a bug that prevented unpickling pickles created with older sympy versions. * The .diff method accepts string arguments again (fixing a regression in 1.10). - Update for version 1.10.0. * The Laplace transform computations has become much more powerful using a rule-based system. * All active deprecations in SymPy have been revamped. * A number of classes and functions have been moved to better locations mostly to resolve problems with cyclic imports within the SymPy codebase. * BREAKING: removed the since long deprecated densearith, densesolve, and densetools * BREAKING CHANGE: core.trace with class Tr moved to physics.quantum.trace. * Full changelog at https://github.com/sympy/sympy/wiki/Release-Notes-for-1.10 - Update for version 1.9. * The internal implementation of Matrix and other matrix classes (SparseMatrix etc) is now DomainMatrix. * Leading term methods now raise PoleError at singularities. * Full changelog at https://github.com/sympy/sympy/wiki/Release-Notes-for-1.9

1 0

New Tumbleweed snapshot 20220522 released!
by Dominique Leuenberger 24 May '22

24 May '22

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: Mesa (22.0.3 -> 22.1.0) Mesa-drivers (22.0.3 -> 22.1.0) aws-cli (1.24.1 -> 1.24.4) cepces expect gcc google-noto-fonts (20170919 -> 20220516) gtk3 (3.24.33+12 -> 3.24.34) iptables (1.8.7 -> 1.8.8) libfakekey (0.1 -> 0.3) lsof python-boto3 (1.23.1 -> 1.23.4) python-botocore (1.26.1 -> 1.26.4) shotwell (0.30.15 -> 0.30.16) virtualbox virtualbox-kmp (6.1.34_k5.17.7_1 -> 6.1.34_k5.17.9_1) yast2-network (4.5.1 -> 4.5.2) === Details === ==== Mesa ==== Version update (22.0.3 -> 22.1.0) Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - Update to 22.1.0 * lot of great featurres, including (since rc5) additional kopper backports for zink, and support for Intel's Alchemist DG2 platform. ==== Mesa-drivers ==== Version update (22.0.3 -> 22.1.0) Subpackages: Mesa-dri Mesa-gallium Mesa-libva libxatracker2 - Update to 22.1.0 * lot of great featurres, including (since rc5) additional kopper backports for zink, and support for Intel's Alchemist DG2 platform. ==== aws-cli ==== Version update (1.24.1 -> 1.24.4) - Update to version 1.24.4 (bsc#1199716) + For detailed changes see https://github.com/aws/aws-cli/blob/1.24.4/CHANGELOG.rst - Update Requires in spec file from setup.py ==== cepces ==== Subpackages: cepces-certmonger cepces-selinux python3-cepces - add b755b56d25f3e54f8f15d9985fd0597b21c1051d.patch ==== expect ==== - add expect-5.45-format-security.patch ==== gcc ==== Subpackages: cpp libstdc++-devel - Add lto-dump binary and link it similarly to e.g. gcov-dump. ==== google-noto-fonts ==== Version update (20170919 -> 20220516) Subpackages: google-noto-fonts-doc noto-sans-fonts - Clarify sources - Fix unversioned obsoletes - Merge noto-sans-display-fonts into noto-sans-fonts - Fixes inconsistent font family names see Github issue #2315 - Bump version to 20220516 - Start using OTF fonts to be in-line with Noto CJK and Emoji - No new fonts - Update URL and source for zips - Update to version 20220509 - 96 new fonts, details at https://pastebin.com/ycnpAn88 ==== gtk3 ==== Version update (3.24.33+12 -> 3.24.34) Subpackages: gtk3-data gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-tigrigna gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-lang gtk3-schema gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Update to version 3.24.34: + Include legacy hicolor icons. + Fix the build with gcc 12. + X11: Trap errors when getting output properties. + Wayland: Ignore empty preedit updates. This fixes a problem with textview scrolling. + Updated translations. ==== iptables ==== Version update (1.8.7 -> 1.8.8) Subpackages: libip4tc2 libip6tc2 libxtables12 xtables-plugins - Update to release 1.8.8 * Add iptables-translate support for: sctp match's - -chunk-types option, connlimit match, multiport match's - -ports option, and the tcpmss match. * Reject setuid executables in libxtables for safety reasons * Extended arptables-nft with -C, -I, -R, -S cmomands and the "-c N,M" counter syntax. * Debug output in iptables-restore (all variants), iptables-nft and ebtables-nft when specifying -v multiple times * Improved performance of iptables-save and -restore ==== libfakekey ==== Version update (0.1 -> 0.3) - update to 0.3: * do not send shift when not needed * build system fixes and developer visible changes ==== lsof ==== - Fix hostname in reproducible builds, bsc#1199709 * remove-hostname.patch ==== python-boto3 ==== Version update (1.23.1 -> 1.23.4) - Update to version 1.23.4 (bsc#1199716) * api-change:``gamesparks``: [``botocore``] This release adds an optional DeploymentResult field in the responses of GetStageDeploymentIntegrationTests and ListStageDeploymentIntegrationTests APIs. * enhancement:StreamingBody: [``botocore``] Allow StreamingBody to be used as a context manager * api-change:``lookoutmetrics``: [``botocore``] In this release we added SnsFormat to SNSConfiguration to support human readable alert. - from version 1.23.3 * api-change:``greengrassv2``: [``botocore``] This release adds the new DeleteDeployment API operation that you can use to delete deployment resources. This release also adds support for discontinued AWS-provided components, so AWS can communicate when a component has any issues that you should consider before you deploy it. * api-change:``quicksight``: [``botocore``] API UpdatePublicSharingSettings enables IAM admins to enable/disable account level setting for public access of dashboards. When enabled, owners/co-owners for dashboards can enable public access on their dashboards. These dashboards can only be accessed through share link or embedding. * api-change:``appmesh``: [``botocore``] This release updates the existing Create and Update APIs for meshes and virtual nodes by adding a new IP preference field. This new IP preference field can be used to control the IP versions being used with the mesh and allows for IPv6 support within App Mesh. * api-change:``batch``: [``botocore``] Documentation updates for AWS Batch. * api-change:``iotevents-data``: [``botocore``] Introducing new API for deleting detectors: BatchDeleteDetector. * api-change:``transfer``: [``botocore``] AWS Transfer Family now supports SetStat server configuration option, which provides the ability to ignore SetStat command issued by file transfer clients, enabling customers to upload files without any errors. - from version 1.23.2 * api-change:``kms``: [``botocore``] Add HMAC best practice tip, annual rotation of AWS managed keys. * api-change:``glue``: [``botocore``] This release adds a new optional parameter called codeGenNodeConfiguration to CRUD job APIs that allows users to manage visual jobs via APIs. The updated CreateJob and UpdateJob will create jobs that can be viewed in Glue Studio as a visual graph. GetJob can be used to get codeGenNodeConfiguration. - Remove unnecessary version constraint for python3-pytest in BuildRequires - Update BuildRequires and Requires from setup.py ==== python-botocore ==== Version update (1.26.1 -> 1.26.4) - Update to 1.26.4 (bsc#1199716) * api-change:``gamesparks``: This release adds an optional DeploymentResult field in the responses of GetStageDeploymentIntegrationTests and ListStageDeploymentIntegrationTests APIs. * enhancement:StreamingBody: Allow StreamingBody to be used as a context manager * api-change:``lookoutmetrics``: In this release we added SnsFormat to SNSConfiguration to support human readable alert. - from version 1.26.3 * api-change:``greengrassv2``: This release adds the new DeleteDeployment API operation that you can use to delete deployment resources. This release also adds support for discontinued AWS-provided components, so AWS can communicate when a component has any issues that you should consider before you deploy it. * api-change:``quicksight``: API UpdatePublicSharingSettings enables IAM admins to enable/disable account level setting for public access of dashboards. When enabled, owners/co-owners for dashboards can enable public access on their dashboards. These dashboards can only be accessed through share link or embedding. * api-change:``appmesh``: This release updates the existing Create and Update APIs for meshes and virtual nodes by adding a new IP preference field. This new IP preference field can be used to control the IP versions being used with the mesh and allows for IPv6 support within App Mesh. * api-change:``batch``: Documentation updates for AWS Batch. * api-change:``iotevents-data``: Introducing new API for deleting detectors: BatchDeleteDetector. * api-change:``transfer``: AWS Transfer Family now supports SetStat server configuration option, which provides the ability to ignore SetStat command issued by file transfer clients, enabling customers to upload files without any errors. - from version 1.26.2 * api-change:``kms``: Add HMAC best practice tip, annual rotation of AWS managed keys. * api-change:``glue``: This release adds a new optional parameter called codeGenNodeConfiguration to CRUD job APIs that allows users to manage visual jobs via APIs. The updated CreateJob and UpdateJob will create jobs that can be viewed in Glue Studio as a visual graph. GetJob can be used to get codeGenNodeConfiguration. ==== shotwell ==== Version update (0.30.15 -> 0.30.16) Subpackages: shotwell-lang - Update to version 0.30.16: + Fix issue with dark mode wallpapers. + Fix compatibility with OpenCV 4. + Fix import of videos from Sony A7C. + Fix mixed up label in Adjust Date/Time. + Fix _LIB dir (missing plugins). + Always enable face tagging functionality. ==== virtualbox ==== Subpackages: virtualbox-guest-tools virtualbox-guest-x11 - Replace SDL-devel BuildRequires with pkgconfig(sdl): allow to use sdl12_compat as an alternative. ==== virtualbox-kmp ==== Version update (6.1.34_k5.17.7_1 -> 6.1.34_k5.17.9_1) - Replace SDL-devel BuildRequires with pkgconfig(sdl): allow to use sdl12_compat as an alternative. ==== yast2-network ==== Version update (4.5.1 -> 4.5.2) - CFA NM: replace problematic characters when getting the filename for the given wireless configuration (bsc#1199451). - 4.5.2

1 0

ALP Community WG meetings will be on Tuesdays 14:30 UTC
by Lubos Kocman 23 May '22

23 May '22

Hello openSUSE! Tuesdays 16:30 CEST / 14:30 UTC will be our regular slot for regular ALP Community WG meetings. It won 12:9 on votes at https://doodle.com/meeting/organize/id/b68562Ve Details and how to join the meeting can be found here: https://en.opensuse.org/openSUSE:ALP/Workgroups/Community See you tomorrow! Thank you!

1 0

traing to send to the list, mx2.opensuse.org rejects mail as spam
by Mathias Homann 22 May '22

22 May '22

Hi, I'm trying to send to the list, but the opensuse mailserver rejects my mail as spam, possibly because of an http url in the mail text. Does this happen to anyone else? Cheers MH -- Mathias Homann Mathias.Homann(a)openSUSE.org Jabber (XMPP): lemmy(a)tuxonline.tech Matrix: @mathias:eregion.de IRC: [Lemmy] on freenode and ircnet (bouncer active) keybase: https://keybase.io/lemmy gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102

6 7

New Tumbleweed snapshot 20220521 released!
by Dominique Leuenberger 22 May '22

22 May '22

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: MozillaFirefox (100.0 -> 100.0.2) bluez kernel-source (5.17.7 -> 5.17.9) === Details === ==== MozillaFirefox ==== Version update (100.0 -> 100.0.2) Subpackages: MozillaFirefox-translations-common - Mozilla Firefox 100.0.2 MFSA 2022-19 (bsc#1199768) * CVE-2022-1802 (bmo#1770137) Prototype pollution in Top-Level Await implementation * CVE-2022-1529 (bmo#1770048) Untrusted input used in JavaScript object indexing, leading to prototype pollution - Mozilla Firefox 100.0.1: * Fixed: Fixed an issue with subtitles in Picture-in-Picture mode while using Netflix (bmo#1768818) * Fixed: Fixed an issue where some commands were unavailable in the Picture-in-Picture window (bmo#1768201) ==== bluez ==== Subpackages: bluez-auto-enable-devices libbluetooth3 - Upgrade bluez-test requirement of PyGObject from ancient version 2 to current version. (bluez/test is at least able to use it since 2014) - Move the dbus-1 system.d file to /usr (bsc#1199207) - Fix self-obsoletion issues - Add supplements to cups subpackage - Split zsh completion into subpackage - Don't tell the user to write to /usr (in README-mesh.SUSE) ==== kernel-source ==== Version update (5.17.7 -> 5.17.9) - Linux 5.17.9 (bsc#1012628). - batman-adv: Don't skb_split skbuffs with frag_list (bsc#1012628). - iwlwifi: iwl-dbg: Use del_timer_sync() before freeing (bsc#1012628). - hwmon: (tmp401) Add OF device ID table (bsc#1012628). - mac80211: Reset MBSSID parameters upon connection (bsc#1012628). - net: rds: use maybe_get_net() when acquiring refcount on TCP sockets (bsc#1012628). - net: Fix features skip in for_each_netdev_feature() (bsc#1012628). - net: mscc: ocelot: fix last VCAP IS1/IS2 filter persisting in hardware when deleted (bsc#1012628). - net: mscc: ocelot: fix VCAP IS2 filters matching on both lookups (bsc#1012628). - net: mscc: ocelot: restrict tc-trap actions to VCAP IS2 lookup 0 (bsc#1012628). - net: mscc: ocelot: avoid corrupting hardware counters when moving VCAP filters (bsc#1012628). - fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove (bsc#1012628). - fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove (bsc#1012628). - fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove (bsc#1012628). - platform/surface: aggregator: Fix initialization order when compiling as builtin module (bsc#1012628). - ice: Fix race during aux device (un)plugging (bsc#1012628). - ice: clear stale Tx queue settings before configuring (bsc#1012628). - ice: fix PTP stale Tx timestamps cleanup (bsc#1012628). - ipv4: drop dst in multicast routing path (bsc#1012628). - drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name() (bsc#1012628). - netlink: do not reset transport header in netlink_recvmsg() (bsc#1012628). - net: chelsio: cxgb4: Avoid potential negative array offset (bsc#1012628). - fbdev: efifb: Fix a use-after-free due early fb_info cleanup (bsc#1012628). - net: sfc: fix memory leak due to ptp channel (bsc#1012628). - fanotify: do not allow setting dirent events in mask of non-dir (bsc#1012628). - mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection (bsc#1012628). - nfs: fix broken handling of the softreval mount option (bsc#1012628). - ionic: fix missing pci_release_regions() on error in ionic_probe() (bsc#1012628). - dim: initialize all struct fields (bsc#1012628). - hwmon: (ltq-cputemp) restrict it to SOC_XWAY (bsc#1012628). - procfs: prevent unprivileged processes accessing fdinfo dir (bsc#1012628). - selftests: vm: Makefile: rename TARGETS to VMTARGETS (bsc#1012628). - net: dsa: flush switchdev workqueue on bridge join error path (bsc#1012628). - arm64: vdso: fix makefile dependency on vdso.so (bsc#1012628). - virtio: fix virtio transitional ids (bsc#1012628). - s390/ctcm: fix variable dereferenced before check (bsc#1012628). - s390/ctcm: fix potential memory leak (bsc#1012628). - s390/lcs: fix variable dereferenced before check (bsc#1012628). - net/sched: act_pedit: really ensure the skb is writable (bsc#1012628). - net: ethernet: mediatek: ppe: fix wrong size passed to memset() (bsc#1012628). - net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral (bsc#1012628). - drm/vc4: hdmi: Fix build error for implicit function declaration (bsc#1012628). - mlxsw: Avoid warning during ip6gre device removal (bsc#1012628). - net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down() (bsc#1012628). - net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending (bsc#1012628). - net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe() (bsc#1012628). - tls: Fix context leak on tls_device_down (bsc#1012628). - drm/vmwgfx: Fix fencing on SVGAv3 (bsc#1012628). - gfs2: Fix filesystem block deallocation for short writes (bsc#1012628). - hwmon: (asus_wmi_sensors) Fix CROSSHAIR VI HERO name (bsc#1012628). - hwmon: (f71882fg) Fix negative temperature (bsc#1012628). - RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core() (bsc#1012628). - iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu (bsc#1012628). - ASoC: max98090: Reject invalid values in custom control put() (bsc#1012628). - ASoC: max98090: Generate notifications on changes for custom control (bsc#1012628). - ASoC: ops: Validate input values in snd_soc_put_volsw_range() (bsc#1012628). - s390: disable -Warray-bounds (bsc#1012628). - ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback (bsc#1012628). - io_uring: assign non-fixed early for async work (bsc#1012628). - net: emaclite: Don't advertise 1000BASE-T and do auto negotiation (bsc#1012628). - net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT (bsc#1012628). - secure_seq: use the 64 bits of the siphash for port offset calculation (bsc#1012628). - tcp: use different parts of the port_offset for index and offset (bsc#1012628). - tcp: resalt the secret every 10 seconds (bsc#1012628). - tcp: add small random increments to the source port (bsc#1012628). - tcp: dynamically allocate the perturb table used by source ports (bsc#1012628). - tcp: increase source port perturb table to 2^16 (bsc#1012628). - tcp: drop the hash_32() part from the index calculation (bsc#1012628). - block: Do not call folio_next() on an unreferenced folio (bsc#1012628). - interconnect: Restore sync state by ignoring ipa-virt in provider count (bsc#1012628). - perf tests: Fix coresight `perf test` failure (bsc#1012628). - firmware_loader: use kernel credentials when reading firmware (bsc#1012628). - KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context() (bsc#1012628). - usb: xhci-mtk: fix fs isoc's transfer error (bsc#1012628). - x86/mm: Fix marking of unused sub-pmd ranges (bsc#1012628). - tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe() (bsc#1012628). - tty: n_gsm: fix buffer over-read in gsm_dlci_data() (bsc#1012628). - tty: n_gsm: fix mux activation issues in gsm_config() (bsc#1012628). - tty: n_gsm: fix invalid gsmtty_write_room() result (bsc#1012628). - usb: gadget: uvc: allow for application to cleanly shutdown (bsc#1012628). - usb: cdc-wdm: fix reading stuck on device close (bsc#1012628). - usb: typec: tcpci: Don't skip cleanup in .remove() on error (bsc#1012628). - usb: typec: tcpci_mt6360: Update for BMC PHY setting (bsc#1012628). - USB: serial: pl2303: add device id for HP LM930 Display (bsc#1012628). - USB: serial: qcserial: add support for Sierra Wireless EM7590 (bsc#1012628). - USB: serial: option: add Fibocom L610 modem (bsc#1012628). - USB: serial: option: add Fibocom MA510 modem (bsc#1012628). - slimbus: qcom: Fix IRQ check in qcom_slim_probe (bsc#1012628). - fsl_lpuart: Don't enable interrupts too early (bsc#1012628). - genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq() (bsc#1012628). - serial: 8250_mtk: Fix UART_EFR register address (bsc#1012628). - serial: 8250_mtk: Fix register address for XON/XOFF character (bsc#1012628). - ceph: fix setting of xattrs on async created inodes (bsc#1012628). - Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()" (bsc#1012628). - mm/huge_memory: do not overkill when splitting huge_zero_page (bsc#1012628). - mm: mremap: fix sign for EFAULT error return value (bsc#1012628). - drm/vmwgfx: Disable command buffers on svga3 without gbobjects (bsc#1012628). - drm/nouveau/tegra: Stop using iommu_present() (bsc#1012628). - i40e: i40e_main: fix a missing check on list iterator (bsc#1012628). - net: phy: Fix race condition on link status change (bsc#1012628). - writeback: Avoid skipping inode writeback (bsc#1012628). - cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp() (bsc#1012628). - ping: fix address binding wrt vrf (bsc#1012628). - ath11k: reduce the wait time of 11d scan and hw scan while add interface (bsc#1012628). - arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map (bsc#1012628). - net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061 (bsc#1012628). - net: phy: micrel: Pass .probe for KS8737 (bsc#1012628). - SUNRPC: Ensure that the gssproxy client can start in a connected state (bsc#1012628). - drm/vmwgfx: Initialize drm_mode_fb_cmd2 (bsc#1012628). - Revert "drm/amd/pm: keep the BACO feature enabled for suspend" (bsc#1012628). - dma-buf: call dma_buf_stats_setup after dmabuf is in valid list (bsc#1012628). - mm/hwpoison: use pr_err() instead of dump_page() in get_any_page() (bsc#1012628). - net: phy: micrel: Fix incorrect variable type in micrel (bsc#1012628). - mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool (bsc#1012628). - commit eab1a2c - Linux 5.17.8 (bsc#1012628). - mm: fix invalid page pointer returned with FOLL_PIN gups (bsc#1012628). - mm,migrate: fix establishing demotion target (bsc#1012628). - mm/mlock: fix potential imbalanced rlimit ucounts adjustment (bsc#1012628). - mm/hwpoison: fix error page recovered but reported "not recovered" (bsc#1012628). - mm: userfaultfd: fix missing cache flush in mcopy_atomic_pte() and __mcopy_atomic() (bsc#1012628). - mm: shmem: fix missing cache flush in shmem_mfill_atomic_pte() (bsc#1012628). - mm: hugetlb: fix missing cache flush in hugetlb_mcopy_atomic_pte() (bsc#1012628). - mm: hugetlb: fix missing cache flush in copy_huge_page_from_user() (bsc#1012628). - mm: fix missing cache flush for all tail pages of compound page (bsc#1012628). - udf: Avoid using stale lengthOfImpUse (bsc#1012628). - rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition (bsc#1012628). - Bluetooth: Fix the creation of hdev->name (bsc#1012628). - commit 718e8e9

1 0

mkfs.btrfs changes to defaults
by Joe Salmeri 21 May '22

21 May '22

mkfs.btrfs now displays the following message when it is run to create a new filesystem btrfs-progs v5.17 See http://btrfs.wiki.kernel.org for more information. NOTE: several default settings have changed in version 5.15, please make sure this does not affect your deployments: - DUP for metadata (-m dup) - enabled no-holes (-O no-holes) - enabled free-space-tree (-R free-space-tree) man mkfs.btrfs points you to the section DUP PROFILES ON A SINGLE DEVICE which says: The mkfs utility will let the user create a filesystem with profiles that write the logical blocks to 2 physical locations. Whether there are really 2 physical copies highly depends on the underlying device type. For example, a SSD drive can remap the blocks internally to a single copy--thus deduplicating them. This negates the purpose of increased redundancy and just wastes filesystem space without providing the expected level of redundancy. The duplicated data/metadata may still be useful to statistically improve the chances on a device that might perform some internal optimizations. The actual details are not usually disclosed by vendors. For example we could expect that not all blocks get deduplicated. This will provide a non-zero probability of recovery compared to a zero chance if the single profile‚ is used. The user should make the tradeoff‚ decision. The deduplication in SSDs is thought to be widely available so the reason behind the mkfs default is to not give a false‚ sense of redundancy. As another example, the widely used USB flash or SD cards use a translation layer between the logical and physical view of the device. The data lifetime may be affected by frequent plugging. The memory cells could get damaged, hopefully not destroying both copies of particular data in case of DUP. The wear levelling techniques can also lead to reduced redundancy even if the device does not do any deduplication. The controllers may put data written in a short timespan into the same physical storage unit (cell, block‚ etc). In case this unit dies, both copies are lost. BTRFS does not add any artificial delay between metadata writes. The traditional rotational hard drives usually fail at the sector level. In any case, a device that starts to misbehave and repairs from the DUP copy should be replaced! DUP is not backup. When I initially installed my TW system btrfs created the filesystem on a single SSD as follows: data single metadata single system single If I now use mkfs.btrfs on a new single SSD the btrfs filesystem is created as follows: data single metadata DUP system DUP In the man page the one statement that caught my attention was "The deduplication in SSDs is thought to be widely available so the reason behind the mkfs default is to not give a false‚ sense of redundancy." It seems like that man page information was written to explain why it originally created data/metadata/system all as single on a single SSD file system and was not updated to reflect that it is now using DUP for metadata and system. So what is the recommendation now, should we convert single SSD installs to use DUP for metadata and system and then do I assume run balance or should we leave them as single? Thanks!

2 1

New Tumbleweed snapshot 20220520 released!
by Dominique Leuenberger 21 May '22

21 May '22

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: ImageMagick (7.1.0.33 -> 7.1.0.35) aaa_base (84.87+git20220419.bf51b75 -> 84.87+git20220518.dc83f4e) adobe-sourcecodepro-fonts (2.030 -> 2.038) at (3.2.4 -> 3.2.5) bubblewrap (0.6.1 -> 0.6.2) gimp gucharmap (13.0.0 -> 14.0.3) hplip imlib2 jfsutils libass (0.15.2 -> 0.16.0) libbpf (0.7.0 -> 0.8.0) libreoffice librsvg (2.54.1 -> 2.54.3) lttng-ust (2.13.0 -> 2.13.2) mozjs91 (91.7.0 -> 91.9.0) orca (42.0 -> 42.1) pam_ssh parted yast2-packager (4.5.3 -> 4.5.4) === Details === ==== ImageMagick ==== Version update (7.1.0.33 -> 7.1.0.35) Subpackages: ImageMagick-config-7-SUSE ImageMagick-extra libMagickCore-7_Q16HDRI10 libMagickWand-7_Q16HDRI10 - version update to 7.1.0.35 see the upstream changelog: * https://github.com/ImageMagick/Website/blob/main/ChangeLog.md ==== aaa_base ==== Version update (84.87+git20220419.bf51b75 -> 84.87+git20220518.dc83f4e) Subpackages: aaa_base-extras - Update to version 84.87+git20220518.dc83f4e: * Also in /etc/profile, rootsh is not restricted - Update to version 84.87+git20220518.78b2a0b: * The wrapper rootsh is not a restricted shell ==== adobe-sourcecodepro-fonts ==== Version update (2.030 -> 2.038) - Update to version 2.038 ( roman fonts ) / 1.058 ( italic fonts ) ==== at ==== Version update (3.2.4 -> 3.2.5) - Update to version 3.2.5: + Fix: atd forgets to run a job in the queue (deb#1004972). - Switch to dynamic UIDs instead of hardcoding 25 ==== bubblewrap ==== Version update (0.6.1 -> 0.6.2) Subpackages: bubblewrap-zsh-completion - Update to version 0.6.2: + New features in Meson build: - Auto-detect whether the man page can be generated. - -Dbwrapdir=... changes the installation directory (useful when being used as a subproject). - -Dtests=false disables unit tests. + Bug fixes: - Add --add-seccomp-fd to shell completions - Document --add-seccomp-fd, --json-status-fd and --share-net in the man page - Add attributes to silence various compiler warnings - Allow compilation of tests with musl on mips architectures - Allow compilation with older glibc - Disable sanitizers for a test helper whose seccomp profile breaks the instrumentation - Disable AddressSanitizer leak detection where it interferes with unit testing ==== gimp ==== Subpackages: gimp-plugin-aa gimp-plugins-python libgimp-2_0-0 libgimpui-2_0-0 - Add gimp-CVE_2022-30067.patch: fix out of memory when reading XCF (boo#1199653 CVE-2022-30067). ==== gucharmap ==== Version update (13.0.0 -> 14.0.3) Subpackages: gucharmap-lang libgucharmap_2_90-7 - Update to version 14.0.3: + Classify characters without script name properly + all: Use PCRE2 instead of GRegex + build: - Enforce required unicode data version - Fix build with meson 0.60 - Fix warning about incompatible pointer return type - Fix warning about unused variable 'priv' - Remove unwanted warning + charmap: Search in details by default + chartable: - Improve Korean Hanja Pronunciations property - Mark special script and block names in italic - Use device scale for character popup + help: Remove duplicate entry + lib: - Enable alphabetical sorting of the Unicode blocks - Remove bogus volatile from type builtins code + unicode: - Add strings to prepare unicode 14 update - Update for unicode 14.0.0 + Updated translations. - Drop a8ee037f8cf151b8b65354bc93c56953e41f5a22.patch: fixed upstream. ==== hplip ==== Subpackages: hplip-hpijs hplip-sane - Add rebased hplip-3.20.6-python-includes.patch to fix the non- functional scanning: libsane-hpaio.so.1: undefined symbol: _DBG (fixes boo#1198794) ==== imlib2 ==== Subpackages: imlib2-loaders libImlib2-1 - declare counter in for loop for big endian to unsignedint (loader_ico.c) bigendian.patch ==== jfsutils ==== - add jfsutils_format-security_ftbs.patch ==== libass ==== Version update (0.15.2 -> 0.16.0) - Update to version 0.16.0: + Fix crashes with fonts missing Postscript names and without one being synthesised by the font provider. + Fix crashes on negative fontsizes and some overflows. + Fix a rare memory leak introduced in 0.13.0. + x86: Fix potential buffer over-read by 16 bytes with AVX2 assembly when large tiles are not enabled (the default). + x86: Fix PIC flags not being interpreted by the assembler, breaking the asm-enabled build setup on NetBSD and OpenBSD. On 32-bit x86, if the toolchain requires PIC objects and relies on compiler defaults to get PIC implicitly, you need to pass - -with-pic to configure to ensure NASM always produces PIC objects. + x86: Fix AVX support not being detected on non-Intel CPUs and some VMs. + x86: Fix CPUID being used on CPUs not supporting the instruction (<= i486) and the way it is used for CPUs with less than 7 CPUID-leafs which could lead to crashes due to illegal instructions. ==== libbpf ==== Version update (0.7.0 -> 0.8.0) - Update to release 0.8.0 * New features and APIs: - support auto-resolution of binaries and shared libraries from PATH, if necessary; - support attaching by function names (only by IP was supported before); - support attaching to USDTs (SEC("usdt/...") and bpf_program__attach_usdt()) with initially supported architectures: x86-64 (amd64); x86 (i386); s390x; ARM64 (aarch64); RISC V (riscv); - improved BPF verifier log reporting for CO-RE relocation failures (no more obscure "invalid func unknown#195896080" errors); - auto-adjust BPF ringbuf size according to host kernel's page size requirements; - high-level BPF map APIs: bpf_map__lookup_elem(), bpf_map__update_elem(), etc that validate key/value buffer sizes; - bpf_link_create() can create all bpf_link-based (including raw_tp, fentry/fexit, etc), falling back to bpf_raw_tracepoint_open() on old kernels transparently; - support opting out from auto-loading BPF programs declaratively with SEC("?..."); - support opting out from auto-creation of declarative BPF maps with bpf_map__set_autocreate(); - support multi-kprobes (SEC("kprobe.multi/...") and bpf_program__attach_kprobe_multi_opts()); - support target-less SEC() programs (e.g., SEC("kprobe"), SEC("tp"), etc); - support BPF sub-skeletons for "incomplete" BPF object files (requires matching bpftool to generate .subskel.h); - BPF cookie support for fentry/fexit/fmod_ret BPF programs (bpf_program__attach_trace_opts()); - support for custom SEC() handlers (libbpf_register_prog_handler()). * BPF-side API - BPF-side USDT APIs. See new usdt.bpf.h header: * BPF_USDT() program wrapper macro; bpf_usdt_arg(), bpf_usdt_arg_cnt(), * bpf_usdt_cookie() helpers; - new bpf_core_field_offset() CO-RE helper and support bpf_core_field_size(type, field) forms; - barrier() and barrier_var() macros for improving BPF code generation; - __kptr and __kptr_ref tags added; - ARC architecture support in bpf_tracing.h header; - new BPF helpers: * bpf_skb_set_tstamp(); * bpf_ima_file_hash(); * bpf_kptr_xchg(); * bpf_map_lookup_percpu_elem(). * Bug fixes - netlink bug fixes; - libbpf.pc fixes to support patch releases properly; - BPF_MAP_TYPE_PERF_EVENT_ARRAY map auto-pinning fix; - minor CO-RE fixes and improvements for some corner cases; - various other small fixes and improvements. ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit - Fix bsc#1197497 - LO-L3: Loading XLSX with 1M rows is ultra slow (or crashes Calc) * bsc1197497.patch ==== librsvg ==== Version update (2.54.1 -> 2.54.3) Subpackages: gdk-pixbuf-loader-rsvg librsvg-2-2 rsvg-thumbnailer typelib-1_0-Rsvg-2_0 - Update to version 2.54.3: + Fix detection of gi-docgen. + Install the generated documentation in the correct place so that Devhelp can find it. - Changes from version 2.54.2: + Fix regressions when computing element geometries. + Add a --disable-gtk-doc option for the configure script, so people can disable generating documentation for cross-compiling. + MSVC: Support generating documentation, and passing introspection paths. ==== lttng-ust ==== Version update (2.13.0 -> 2.13.2) - Update to version 2.13.2 (changes since 2.13.0): * Fix: ust-compiler: constructor/destructor build on g++ 4.8. * ust-compiler: constructor/destructor whitespaces layout and macro dependency. * Fix: ust-cancelstate: include string.h for strerror. * Fix: libnuma is prepended to LIBS. * Fix: Allow disabling some abi compat tests. * Fix: generate probe registration constructor as a C++ constuctor. * Fix: nestable pthread cancelstate. * Fix: abort on decrement_sem_count during concurrent tracing start and teardown. * Fix: allocating C++ compound literal on heap with Clang. * Check for C++11 when building C++ probe providers. * fix: liblttng-ust-fd async-signal-safe close(). * tracepoints: print debug message when lttng-ust-tracepoint.so is not found. * Fix: static_assert unavailable with glibc < 2.16. * Fix: combined tracing of lttng-ust 2.12/2.13 generates corrupted traces. * doc/man: Document LTTNG_UST_ABORT_ON_CRITICAL variable. * Fix: remove autoconf features default value in help message. * Fix: add extern "C" to two header files. * Fix: __STDC_VERSION__ can be undefined in C++. * Fix: sample discarded events count before reserve. * Fix: ring buffer event counter. * Fix: concurrent exec(2) file descriptor leak. * Add "domain" parameter to the Log4j 2.x agent. * Fix: Convert custom loglevels in Log4j 2.x agent. * Fix: coverity reported null returns in Log4j2 agent. * Add a Log4j 2.x Java agent. * Fix: may be used uninitialised on powerpc. * Fix: doc/examples/java-log4j: fix paths to directories. * Fix: doc/examples/java-jul: fix paths to directories. ==== mozjs91 ==== Version update (91.7.0 -> 91.9.0) - Update to version 91.9.0: + Various stability, functionality, and security fixes. ==== orca ==== Version update (42.0 -> 42.1) Subpackages: orca-lang - Update to version 42.1: + Web (Chromium + Gecko): - Fix several performance issues impacting Google Docs. - Fix bug in which Orca failed to speak when clicking on a line. + WebKitGtk: Handle WebKitGtk's change in toolkit name casing so that older versions of Orca continue to work with newer versions of WebKitGtk. + Updated translations. ==== pam_ssh ==== Subpackages: pam_ssh-32bit - use pam macros [bsc#1190960] ==== parted ==== Subpackages: libparted-fs-resize0 libparted2 parted-lang - add new type command from upstream added patches: - type-command.patch ==== yast2-packager ==== Version update (4.5.3 -> 4.5.4) - Fix package counters in the installation slideshow (boo#1199621). - 4.5.4

1 0

Krita crash on saving
by Gerd Fleischer 21 May '22

21 May '22

Hello, Krita crashes for me on the latest snapshots when saving file. Dr. Konqui output: Application: Krita (krita), signal: Segmentation fault [KCrash Handler] #4 0x00007fcee791e6c3 in std::__atomic_base<int>::load (__m=std::memory_order_relaxed, this=0x2ffffffff) at /usr/include/c++/12/bits/ atomic_base.h:488 #5 QAtomicOps<int>::loadRelaxed<int> (_q_value=<error reading variable: Cannot access memory at address 0x2ffffffff>) at /usr/include/qt5/QtCore/ qatomic_cxx11.h:239 #6 QBasicAtomicInteger<int>::loadRelaxed (this=0x2ffffffff) at /usr/include/ qt5/QtCore/qbasicatomic.h:107 #7 QtPrivate::RefCount::deref (this=0x2ffffffff) at /usr/include/qt5/QtCore/ qrefcount.h:66 #8 QList<QAction*>::~QList (this=<optimized out>, this=<optimized out>) at / usr/include/qt5/QtCore/qlist.h:873 #9 0x00007fcee797f014 in KToolBar::Private::~Private (this=<optimized out>, this=<optimized out>) at /usr/src/debug/krita-5.0.6-1.2.x86_64/libs/ widgetutils/xmlgui/ktoolbar.cpp:83 #10 KToolBar::~KToolBar (this=<optimized out>, this=<optimized out>) at /usr/ src/debug/krita-5.0.6-1.2.x86_64/libs/widgetutils/xmlgui/ktoolbar.cpp:794 #11 0x00007fcee797f0f9 in KToolBar::~KToolBar (this=<optimized out>, this=<optimized out>) at /usr/src/debug/krita-5.0.6-1.2.x86_64/libs/ widgetutils/xmlgui/ktoolbar.cpp:795 #12 0x00007fcee8f1922e in QObjectPrivate::deleteChildren (this=this@entry=0x55a4a247fac0) at kernel/qobject.cpp:2104 #13 0x00007fcee9ad7946 in QWidget::~QWidget (this=0x55a4a6d5eb80, __in_chrg=<optimized out>) at kernel/qwidget.cpp:1522 #14 0x00007fcee9ad7c89 in QWidget::~QWidget (this=0x55a4a6d5eb80, __in_chrg=<optimized out>) at kernel/qwidget.cpp:1546 #15 0x00007fcee8f1922e in QObjectPrivate::deleteChildren (this=this@entry=0x55a49c2f8780) at kernel/qobject.cpp:2104 #16 0x00007fcee9ad7946 in QWidget::~QWidget (this=0x55a49c2f8740, __in_chrg=<optimized out>) at kernel/qwidget.cpp:1522 #17 0x00007fcee9c49869 in QSplitter::~QSplitter (this=0x55a49c2f8740, __in_chrg=<optimized out>) at widgets/qsplitter.cpp:979 #18 0x00007fcee8f1922e in QObjectPrivate::deleteChildren (this=this@entry=0x55a4a61d6f10) at kernel/qobject.cpp:2104 #19 0x00007fcee9ad7946 in QWidget::~QWidget (this=0x55a49cc5fd20, __in_chrg=<optimized out>) at kernel/qwidget.cpp:1522 #20 0x00007fcee292c3e9 in KFileWidget::~KFileWidget (this=<optimized out>, this=<optimized out>) at /usr/src/debug/kio-5.94.0-1.1.x86_64/src/filewidgets/ kfilewidget.cpp:472 #21 0x00007fcee8f1922e in QObjectPrivate::deleteChildren (this=this@entry=0x55a4a13054c0) at kernel/qobject.cpp:2104 #22 0x00007fcee9ad7946 in QWidget::~QWidget (this=this@entry=0x55a4a2e6db20, __in_chrg=<optimized out>) at kernel/qwidget.cpp:1522 #23 0x00007fcee9ca08fa in QDialog::~QDialog (this=this@entry=0x55a4a2e6db20, __in_chrg=<optimized out>) at dialogs/qdialog.cpp:426 #24 0x00007fcee29e231d in KDEPlatformFileDialogBase::~KDEPlatformFileDialogBase (this=<optimized out>, this=<optimized out>) at /usr/src/debug/plasma5-integration-5.24.5-1.2.x86_64/ build/src/platformtheme/KDEPlasmaPlatformTheme_autogen/ EWIEGA46WW/../../../../../src/platformtheme/kdeplatformfiledialogbase_p.h:14 #25 KDEPlatformFileDialog::~KDEPlatformFileDialog (this=<optimized out>, this=<optimized out>) at /usr/src/debug/plasma5-integration-5.24.5-1.2.x86_64/ build/src/platformtheme/KDEPlasmaPlatformTheme_autogen/ EWIEGA46WW/../../../../../src/platformtheme/kdeplatformfiledialoghelper.h:14 #26 KDEPlatformFileDialog::~KDEPlatformFileDialog (this=<optimized out>, this=<optimized out>) at /usr/src/debug/plasma5-integration-5.24.5-1.2.x86_64/ build/src/platformtheme/KDEPlasmaPlatformTheme_autogen/ EWIEGA46WW/../../../../../src/platformtheme/kdeplatformfiledialoghelper.h:14 #27 0x00007fcee29f6e67 in KDEPlatformFileDialogHelper::~KDEPlatformFileDialogHelper (this=<optimized out>, this=<optimized out>) at /usr/src/debug/plasma5- integration-5.24.5-1.2.x86_64/src/platformtheme/ kdeplatformfiledialoghelper.cpp:257 #28 0x00007fcee29f6ec9 in KDEPlatformFileDialogHelper::~KDEPlatformFileDialogHelper (this=<optimized out>, this=<optimized out>) at /usr/src/debug/plasma5- integration-5.24.5-1.2.x86_64/src/platformtheme/ kdeplatformfiledialoghelper.cpp:258 #29 0x00007fcee9ca0c84 in QDialogPrivate::~QDialogPrivate (this=0x55a4aaf497e0, __in_chrg=<optimized out>) at dialogs/qdialog.cpp:112 #30 0x00007fcee9cab729 in QFileDialogPrivate::~QFileDialogPrivate (this=0x55a4aaf497e0, __in_chrg=<optimized out>) at dialogs/qfiledialog.cpp: 553 #31 0x00007fcee7913381 in KisPreviewFileDialog::~KisPreviewFileDialog (this=<optimized out>, this=<optimized out>) at /usr/src/debug/ krita-5.0.6-1.2.x86_64/build/libs/widgetutils/kritawidgetutils_autogen/ EWIEGA46WW/../../../../../libs/widgetutils/KisPreviewFileDialog.h:41 #32 KisPreviewFileDialog::~KisPreviewFileDialog (this=<optimized out>, this=<optimized out>) at /usr/src/debug/krita-5.0.6-1.2.x86_64/build/libs/ widgetutils/kritawidgetutils_autogen/EWIEGA46WW/../../../../../libs/ widgetutils/KisPreviewFileDialog.h:41 #33 0x00007fcee792880b in QScopedPointerDeleter<KisPreviewFileDialog>::cleanup (pointer=<optimized out>) at /usr/include/qt5/QtCore/qscopedpointer.h:52 #34 QScopedPointer<KisPreviewFileDialog, QScopedPointerDeleter<KisPreviewFileDialog> >::~QScopedPointer (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/ qscopedpointer.h:107 #35 KoFileDialog::Private::~Private (this=<optimized out>, this=<optimized out>) at /usr/src/debug/krita-5.0.6-1.2.x86_64/libs/widgetutils/ KoFileDialog.cpp:43 #36 KoFileDialog::~KoFileDialog (this=<optimized out>, this=<optimized out>) at /usr/src/debug/krita-5.0.6-1.2.x86_64/libs/widgetutils/KoFileDialog.cpp:67 #37 0x00007fceeac8100d in KisMainWindow::saveDocument (this=0x55a49cf08080, document=<optimized out>, saveas=<optimized out>, isExporting=<optimized out>, isAdvancedExporting=<optimized out>) at /usr/src/debug/krita-5.0.6-1.2.x86_64/ libs/ui/KisMainWindow.cpp:1471 #38 0x00007fceeac81c73 in KisMainWindow::slotFileSave (this=0x55a49cf08080) at /usr/src/debug/krita-5.0.6-1.2.x86_64/libs/ui/KisMainWindow.cpp:1745 #39 0x00007fcee8f26e1c in doActivate<false> (sender=0x55a4a2dd0580, signal_index=4, argv=0x7ffcf0d59aa0) at kernel/qobject.cpp:3898 #40 0x00007fcee8f200cf in QMetaObject::activate (sender=sender@entry=0x55a4a2dd0580, m=m@entry=0x7fcee9faed40 <QAction::staticMetaObject>, local_signal_index=local_signal_index@entry=1, argv=argv@entry=0x7ffcf0d59aa0) at kernel/qobject.cpp:3946 #41 0x00007fcee9a93b62 in QAction::triggered (this=this@entry=0x55a4a2dd0580, _t1=<optimized out>) at .moc/moc_qaction.cpp:376 #42 0x00007fcee9a967ab in QAction::activate (this=0x55a4a2dd0580, event=<optimized out>) at kernel/qaction.cpp:1161 #43 0x00007fcee9b8e01a in QAbstractButtonPrivate::click (this=0x55a4a5c5bbc0) at widgets/qabstractbutton.cpp:398 #44 0x00007fcee9b8e167 in QAbstractButton::mouseReleaseEvent (this=0x55a4a5c5b5f0, e=0x7ffcf0d5a0c0) at widgets/qabstractbutton.cpp:1044 #45 0x00007fcee9c860fa in QToolButton::mouseReleaseEvent (this=<optimized out>, e=<optimized out>) at widgets/qtoolbutton.cpp:622 #46 0x00007fcee9adbf48 in QWidget::event (this=0x55a4a5c5b5f0, event=0x7ffcf0d5a0c0) at kernel/qwidget.cpp:9020 #47 0x00007fcee9a9a37e in QApplicationPrivate::notify_helper (this=this@entry=0x55a49b9a2e60, receiver=receiver@entry=0x55a4a5c5b5f0, e=e@entry=0x7ffcf0d5a0c0) at kernel/qapplication.cpp:3632 #48 0x00007fcee9aa28c2 in QApplication::notify (this=this@entry=0x7ffcf0d5a940, receiver=receiver@entry=0x55a4a5c5b5f0, e=e@entry=0x7ffcf0d5a0c0) at kernel/qapplication.cpp:3076 #49 0x00007fceeac4463e in KisApplication::notify (this=0x7ffcf0d5a940, receiver=0x55a4a5c5b5f0, event=0x7ffcf0d5a0c0) at /usr/src/debug/ krita-5.0.6-1.2.x86_64/libs/ui/KisApplication.cpp:768 #50 0x00007fcee8eef988 in QCoreApplication::notifyInternal2 (receiver=0x55a4a5c5b5f0, event=0x7ffcf0d5a0c0) at kernel/ qcoreapplication.cpp:1064 #51 0x00007fcee9aa09ce in QApplicationPrivate::sendMouseEvent (receiver=receiver@entry=0x55a4a5c5b5f0, event=event@entry=0x7ffcf0d5a0c0, alienWidget=<optimized out>, nativeWidget=0x55a49cf08080, buttonDown=buttonDown@entry=0x7fcee9fe6330 <qt_button_down>, lastMouseReceiver=..., spontaneous=true, onlyDispatchEnterLeave=false) at kernel/qapplication.cpp:2614 #52 0x00007fcee9af4d68 in QWidgetWindow::handleMouseEvent (this=0x55a4a2e805c0, event=0x7ffcf0d5a410) at kernel/qwidgetwindow.cpp:683 #53 0x00007fcee9af82c0 in QWidgetWindow::event (this=0x55a4a2e805c0, event=0x7ffcf0d5a410) at kernel/qwidgetwindow.cpp:300 #54 0x00007fcee9a9a37e in QApplicationPrivate::notify_helper (this=this@entry=0x4037000000000000, receiver=receiver@entry=0x55a4a2e805c0, e=0x7ffcf0d5a410) at kernel/qapplication.cpp:3632 #55 0x00007fcee9aa172d in QApplication::notify (this=this@entry=0x7ffcf0d5a940, receiver=receiver@entry=0x55a4a2e805c0, e=e@entry=0x7ffcf0d5a410) at kernel/qapplication.cpp:3378 #56 0x00007fceeac4463e in KisApplication::notify (this=0x7ffcf0d5a940, receiver=0x55a4a2e805c0, event=0x7ffcf0d5a410) at /usr/src/debug/ krita-5.0.6-1.2.x86_64/libs/ui/KisApplication.cpp:768 #57 0x00007fcee8eef988 in QCoreApplication::notifyInternal2 (receiver=0x55a4a2e805c0, event=0x7ffcf0d5a410) at kernel/ qcoreapplication.cpp:1064 #58 0x00007fcee934ba45 in QGuiApplicationPrivate::processMouseEvent (e=0x55a4aaf492c0) at kernel/qguiapplication.cpp:2282 #59 0x00007fcee93202ac in QWindowSystemInterface::sendWindowSystemEvents (flags=flags@entry=...) at kernel/qwindowsysteminterface.cpp:1169 #60 0x00007fcee2b784da in xcbSourceDispatch (source=<optimized out>) at qxcbeventdispatcher.cpp:105 #61 0x00007fcee627bda0 in g_main_context_dispatch () from /lib64/ libglib-2.0.so.0 #62 0x00007fcee627c158 in ?? () from /lib64/libglib-2.0.so.0 #63 0x00007fcee627c1ec in g_main_context_iteration () from /lib64/ libglib-2.0.so.0 #64 0x00007fcee8f475a6 in QEventDispatcherGlib::processEvents (this=0x55a49ba63fa0, flags=...) at kernel/qeventdispatcher_glib.cpp:423 #65 0x00007fcee8eee3fb in QEventLoop::exec (this=this@entry=0x7ffcf0d5a740, flags=..., flags@entry=...) at ../../include/QtCore/../../src/corelib/global/ qflags.h:69 #66 0x00007fcee8ef6566 in QCoreApplication::exec () at ../../include/ QtCore/../../src/corelib/global/qflags.h:121 #67 0x00007fcee933f3bc in QGuiApplication::exec () at kernel/ qguiapplication.cpp:1867 #68 0x00007fcee9a9a2f5 in QApplication::exec () at kernel/qapplication.cpp: 2824 #69 0x000055a49942279c in main (argc=<optimized out>, argv=<optimized out>) at /usr/src/debug/krita-5.0.6-1.2.x86_64/krita/main.cc:698

2 1