February 2021 - openSUSE Factory - openSUSE Mailing Lists

openSUSE:Factory - Build fail notification
by DimStar / Dominique Leuenberger 19 Feb '21

19 Feb '21

Dear Package maintainers and hackers. Below package(s) in openSUSE:Factory have been failing to build for at least 4 weeks. We tried to send out notifications to the configured bugowner/maintainers of the package(s), but so far no fix has been submitted. This probably means that the maintainer/bugowner did not yet find the time to look into the matter and he/she would certainly appreciate help to get this sorted. - python-agate-sql Unless somebody is stepping up and submitting fixes, the listed package(s) are going to be removed from openSUSE:Factory. Kind regards, DimStar / Dominique Leuenberger <dimstar(a)opensuse.org>

1 0

New Tumbleweed snapshot 20210218 released!
by Dominique Leuenberger 19 Feb '21

19 Feb '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: eog (3.38.1 -> 3.38.2) evince (3.38.1 -> 3.38.2) evolution (3.38.3 -> 3.38.4) evolution-data-server (3.38.3 -> 3.38.4) evolution-ews (3.38.3 -> 3.38.4) freeipmi (1.6.6 -> 1.6.7) glib2 (2.66.6 -> 2.66.7) gnome-autoar (0.2.4 -> 0.3.0) gnome-maps (3.38.3 -> 3.38.4) gnome-terminal (3.38.2 -> 3.38.3) gptfdisk (1.0.5 -> 1.0.6) kbd (2.3.0 -> 2.4.0) kplotting (5.78.0 -> 5.79.0) libgdata (0.17.13 -> 0.18.0) libqt5-qtstyleplugins openal-soft (1.21.0 -> 1.21.1) radvd (2.18 -> 2.19) rubygem-i18n (1.8.8 -> 1.8.9) samba (4.13.3+git.181.fc4672a5b81 -> 4.13.4+git.187.5ad4708741a) sane-backends (1.0.31 -> 1.0.32) sensors tepl (5.0.1 -> 5.1.1) transactional-update (2.28.3 -> 3.1.4) udisks2 (2.9.1 -> 2.9.2) vte (0.62.2 -> 0.62.3) webkit2gtk3 (2.30.4 -> 2.30.5) yelp (3.38.2 -> 3.38.3) yelp-xsl (3.38.2 -> 3.38.3) === Details === ==== eog ==== Version update (3.38.1 -> 3.38.2) Subpackages: eog-lang - Update to version 3.38.2: + Warning about overwriting GError when unlinking a directory while viewing. + Update appdata screenshot. + Updated translations. ==== evince ==== Version update (3.38.1 -> 3.38.2) Subpackages: evince-lang evince-plugin-comicsdocument evince-plugin-djvudocument evince-plugin-dvidocument evince-plugin-pdfdocument evince-plugin-tiffdocument evince-plugin-xpsdocument libevdocument3-4 libevview3-3 nautilus-evince typelib-1_0-EvinceDocument-3_0 typelib-1_0-EvinceView-3_0 - Update to version 3.38.2: + libdocument: - Fix parameter type in gtk-doc. - Stop trusting phsyical dimensions from monitors. + libview: - Fix support for HiDPI in link preview. - Forgo setting device offset on page surfaces. + pdf: Keep same visual appearance between displayed and copied text. ==== evolution ==== Version update (3.38.3 -> 3.38.4) Subpackages: evolution-lang evolution-plugin-bogofilter evolution-plugin-pst-import evolution-plugin-spamassassin evolution-plugin-text-highlight - Update to version 3.38.4: + e-editor.js: Correct variable name in EvoEditor.InsertSignature(). + Fix a memory leak when quoting headers for message replies. + Bugs fixed: glgo#GNOME/evolution#1157, glgo#GNOME/evolution#1314, glgo#GNOME/evolution#1330. + Updated translations. ==== evolution-data-server ==== Version update (3.38.3 -> 3.38.4) Subpackages: evolution-data-server-lang libcamel-1_2-62 libebackend-1_2-10 libebook-1_2-20 libebook-contacts-1_2-3 libecal-2_0-1 libedata-book-1_2-26 libedata-cal-2_0-1 libedataserver-1_2-25 libedataserverui-1_2-2 - Update to version 3.38.4: + CamelFolder: Cancel save of the changes early in the dispose(). + AlarmNotify: - The e_alarm_notify_activate() can be called multiple times. - Stop using g_application_register(). - The XDG_CURRENT_DESKTOP env is a list. + Bug Fixes: glgo#GNOME/evolution-data-server#293, glgo#GNOME/evolution-data-server#296, glgo#GNOME/evolution-data-server#298, glgo#GNOME/evolution-data-server#299, glgo#GNOME/evolution-data-server#300. + Updated translations. ==== evolution-ews ==== Version update (3.38.3 -> 3.38.4) Subpackages: evolution-ews-lang - Update to version 3.38.4: + e-ews-notification: Add thread safety around get_events thread. + Bugs fixed: glgo#GNOME/evolution-ews#140, glgo#GNOME/evolution-ews#141. + Updated translations. ==== freeipmi ==== Version update (1.6.6 -> 1.6.7) Subpackages: libfreeipmi17 libipmiconsole2 libipmidetect0 - freeipmi 1.6.7: * Do not require IPMI access when running ipmi-fru with the - -fru-file option * Minor documentation updates - the following fixes were upstreamed: * Fix default permissions of various config and system files, drop 1103311-service-files-mode.patch ==== glib2 ==== Version update (2.66.6 -> 2.66.7) Subpackages: glib2-lang glib2-tools libgio-2_0-0 libgio-2_0-0-32bit libglib-2_0-0 libglib-2_0-0-32bit libgmodule-2_0-0 libgmodule-2_0-0-32bit libgobject-2_0-0 libgobject-2_0-0-32bit libgthread-2_0-0 libgthread-2_0-0-32bit - Update to version 2.66.7: + Fix various regressions caused by rushed security fixes in 2.66.6. + Fix a silent integer truncation when calling `g_byte_array_new_take()` for byte arrays bigger than `G_MAXUINT`. + Disallow using currently-undefined D-Bus connection or server flags to prevent forward-compatibility problems with new security-sensitive flags likely to be released in GLib 2.68. + Bugs fixed: glgo#GNOME/GLib!1933, glgo#GNOME/GLib!1943, glgo#GNOME/GLib!1944, glgo#GNOME/GLib!1945. ==== gnome-autoar ==== Version update (0.2.4 -> 0.3.0) Subpackages: libgnome-autoar-0-0 libgnome-autoar-gtk-0-0 - Update to version 0.3.0: + Recognize MIME type aliases of extractable archives. + Add extraction support for password-protected archives. + CVE-2020-36241: Prevent extraction outside the destination dir. ==== gnome-maps ==== Version update (3.38.3 -> 3.38.4) Subpackages: gnome-maps-lang - Update to version 3.38.4: + Fix a bug resulting in writing a broken last view position on exit in some circumstances. + Fix a bug preventing wrapping around at the date line with dark tiles. + Fix a bug causing hanging in cases when dragging around route markers. + Updated translations. ==== gnome-terminal ==== Version update (3.38.2 -> 3.38.3) Subpackages: gnome-shell-search-provider-gnome-terminal gnome-terminal-lang nautilus-extension-terminal - Update to version 3.38.3: + app: Limit the number of clipboard targets to a sensible number + Updated translations. ==== gptfdisk ==== Version update (1.0.5 -> 1.0.6) - Update to 1.0.6 * Fixed bug that could cause segfault if GPT header claimed partition entries are oversized. See: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-0256 * Fixed bug that could cause a crash if a badly-formatted MBR disk was read. See: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-0308 * Renamed the partition type "Freedesktop $BOOT" to "XBOOTLDR partition". * Added several more Freedesktop partition table type codes (0x8312 through 0x831C). * Fixed type code definition in diskio-unix.cc that prevented 32-bit builds from correctly handling disks over 4 TiB in size. * Minor tweaks to get the software to compile on FreeBSD; that seems to have fallen into disrepair. ==== kbd ==== Version update (2.3.0 -> 2.4.0) Subpackages: kbd-legacy - Update to version 2.4.0: * po: Update cs and sr translations (from translationproject.org) * libkfont: Use only KDFONTOP * Added support for a few derivatives of neo * Fix use-after-free of pipe_cmd * Update solar24x32 font * vlock's pam config added to destination directory * Update sun12x22.psfu * libkeymap: unify non/unicode accent_table generation * libkeymap: note about --unicode use * libkeymap: remove last ushort * fi.map: use newly added deadkeys * Do not install internal library * Additional deadkeys - Remove kbd-1.15.2-setfont-no-cruft.patch The old ioctls were finally dropped. ==== kplotting ==== Version update (5.78.0 -> 5.79.0) - Update to 5.79.0 * New feature release * For more details please see: * https://kde.org/announcements/kde-frameworks-5.79.0 - Changes since 5.78.0: * examples/: Use new signal/slot syntax ==== libgdata ==== Version update (0.17.13 -> 0.18.0) Subpackages: libgdata-lang libgdata22 typelib-1_0-GData-0_0 - Update to version 0.18.0: + Add support for Team Drives. + Bugs fixed: glgo#GNOME/libgdata#25. + Updated translations. ==== libqt5-qtstyleplugins ==== - Add qtstyleplugins-gtksettings.patch: Align Qt with GTK settings a bit better. - Add qtstyleplugins-fix-deprecations.patch: Fix various Qt deprecations. - Remove fix-build-qt5.15.patch: merge into qtstyleplugins-fix-deprecations.patch (not distinct enough). ==== openal-soft ==== Version update (1.21.0 -> 1.21.1) Subpackages: libopenal1 openal-soft-data - update to 1.21.1: * Improved alext.h's detection of standard types. * Improved slightly the local source position when the listener and source are near each other. * Improved click/pop prevention for sounds that stop prematurely. * Fixed compilation for Windows ARM targets with MSVC. * Fixed ARM NEON detection on Windows. * Fixed CoreAudio capture when the requested sample rate doesn't match the system configuration. * Fixed OpenSL capture desyncing from the internal capture buffer. * Fixed sources missing a batch update when applied after quickly restarting the source. * Fixed missing source stop events when stopping a paused source. * Added capture support to the experimental Oboe backend. ==== radvd ==== Version update (2.18 -> 2.19) - Update to version 2.19 * bug fixes * cleanups - Modify the patches becuase of version updating * radvd-configure.patch and radvd-systemd.patch - Update radvd.keyring for signing source code ==== rubygem-i18n ==== Version update (1.8.8 -> 1.8.9) Subpackages: ruby2.7-rubygem-i18n ruby3.0-rubygem-i18n - updated to version 1.8.9 * Rely on Ruby 3's native Hash#except method -- #557 ==== samba ==== Version update (4.13.3+git.181.fc4672a5b81 -> 4.13.4+git.187.5ad4708741a) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr1 libndr1-32bit libnetapi0 libnetapi0-32bit libsamba-credentials0 libsamba-credentials0-32bit libsamba-errors0 libsamba-errors0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-policy0-python3 libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap2 libsmbldap2-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-client samba-client-32bit samba-doc samba-libs samba-libs-32bit samba-libs-python3 samba-python3 samba-winbind samba-winbind-32bit - Update to 4.13.4 * Work around special SMB2 IOCTL response behavior of NetApp Ontap 7.3.7; (bso#14607); * Temporary DFS share setup doesn't set case parameters in the same way as a regular share definition does; (bso#14612); * lib: Avoid declaring zero-length VLAs in various messaging functions; (bso#14605); * Do not create an empty DB when accessing a sam.ldb; (bso#14579); * vfs_fruit may close wrong backend fd; (bso#14596); * Temporary DFS share setup doesn't set case parameters in the same way as a regular share definition does; (bso#14612); * vfs_virusfilter: Allocate separate memory for config char*; (bso#14606); * vfs_fruit may close wrong backend fd; (bso#14596); * Work around special SMB2 IOCTL response behavior of NetApp Ontap 7.3.7; (bso#14607); * The cache directory for the user gencache should be created recursively; (bso#14601); * Be more flexible with repository names in CentOS 8 test environments; (bso#14594); - Uninstalling samba-client: Failed to disable unit, cifs.service does not exists; (bsc#1180388); ==== sane-backends ==== Version update (1.0.31 -> 1.0.32) Subpackages: libsane1 sane-backends-autoconfig - Remove udev rules mangling for USB devices (ATTR vs ATTRS) (!510) - Do no add SCSI id twice for EPSON Perfection 1640SU (!509) - Upgraded to sane-backends version 1.0.32 Changes since 1.0.31 see https://gitlab.com/sane-project/backends/-/blob/master/NEWS Numbers of the form '(#NNN)' usually mean upstream issues like https://gitlab.com/sane-project/backends/-/issues/NNN and numbers of the form '(!MMM)' usually mean upstream merge requests like https://gitlab.com/sane-project/backends/-/merge_requests/MMM Backends * all backends now respect the 'local_only' parameter when 'true' is passed to 'sane_get_devices()' in that they do not actively go out looking for networked devices (!502) * 'artec_eplus48u': fixes configuration for AstraSlim SE (!545) * 'avision': adds the AV186+ and AV188 as supported (!532) * 'avision': fixes doubled height issue (#402) * 'avision': fixes a debug message and compiler warning (!515) * 'canon_dr': adds support for the DR-C120 and DR-C130 (#175) * 'canon_dr': adds support for uploading of fine calibration uploads * 'canon_dr': enables fine calibration for the P-208 * 'canon_dr': improves DR-C225 support (#431) * 'canon_lide70': adds support for document scanning on the Canon LiDE 600(F), thanks to a hardware donation by Georg Sauthoff * 'dll': fixes a memory leak (!537) * 'epson2': adds support for the ET-2600 (#395) * 'epson2': adds autofocus support for devices that support it (!531) * 'epson2': fixes brightness support for DS-G20000/12000XL (!529) * 'epson2': fixes an unchecked return value issue (!526) * 'escl': adds support for brightness, threshold, sharpen and contrast options (!527, !528) * 'escl': adds support for LaserJet FLowMFP M578 and MFP M630 (#424) * 'escl': adds support for DeskJet 2710, 2723 (!519) and 3760 (!554) * 'escl': adds support for the PIXMA TS-5351 (!544) and MG5765 (!517) * 'escl': adds support for the Brother HL-L258DW (!517) * 'escl': fixes Avahi device discovery (!536) * 'escl': fixes crashes for devices without a flatbed (!554) * 'escl': fixes segfaults in option handling (!557) * 'escl': fixes sleep mode (!577) * 'escl': fixes builds without libpoppler-glib-dev (#422) * 'escl': fixes a memory issue in its capability handling (#425) * 'fujitsu': fixes brightness/contrast for the iX500 * 'fujitsu': fixes memory corruption for duplex scans * 'genesys': disables support for CanoScan 4400F to prevent possible physical damage (#436) * 'gt68xx': fixes scan cancellation logic (#356) * 'pixma': adds untested support for models released in 2020 (!553) * 'pixma': adds support for ADF scans on the i-SENSYS MF260 * 'pixma': adds support for PIXMA M340 buttons and ADF status (!513) * 'pixma': adds an option to control when to calibrate (#321) * 'pixma': fixes support for the MX492 (!548) * 'pixma': fixes ADF support for the MX490 Series * 'pixma': fixes max resolution for ADF scans on the PIXMA M320 (#364) * 'pixma': fixes compile errors when libxml2 is not available (#345) * 'plustek': fixes CanoScanN650u discovery (#137) * 'test': fixes several memory leaks (!537) Frontends * 'saned': add support for listening on a custom or ephemeral port via a new '-p'/'--port' option (!549) * 'scanimage': fixes crashes for multi-pass and handheld scans (#408) * 'scanimage': fixes a memory leak (!551) * 'scanimage': fixes option handling for non-compliant backends (#362) Documentation * updates our copy of the GPL with the FSF's current postal address. This changes references to the Library GPL (LGPL-2.0) into refs to the Lesser GPL (LGPL-2.1) but does *not* affect the licensing of our backends (#320). * source code now points to the Free Software Foundation's website for copies of the GPL and LGPL (#320) * updates translations for British English and Ukrainian * adds a pointer to our Ubuntu PPA for pre-built binaries * adds SCSI IDs for the EPSON Perfection 1640SU (!509) * fixes a boat-load of spelling mistakes (!516, thanks @marschap) * updates description files for 'scangearmp2' and 'utsushi' external backends Build * removes support for 'automake' maintainer mode (!522) * removes 'sane' subdirectory from the lock directory to fix issues when the lock directory is on 'tmpfs' (#363) * adds support for builds using GitLab "source" tarballs (#248) * fixes static link scenarios (#124) * fixes 'python' invocations to use the detected program (!525) * disables 'genesys' testsuite when that backend is not built (#354) * suppresses warnings about obsolete autoconf macros (#122) * fixes availability of sane-backends.pot file inputs (#344) * fixes 'configure.ac' for use with 'autoconf-2.70' (#409) * removes CVS keywords from the source to ease use by downstreams that still use CVS (!547) Miscellaneous * udev rules now trigger on all events other than 'remove' (!541). This aims to address a kernel API change introduced in 4.14. The new behaviour may slow down udev's processing of kernel events when still using our plain 'udev' or 'udev+acl' rules, even though these have been optimized slightly (#341). If that bothers you, now is a good time to switch to our 'udev+hwdb' rules in combination with the 'hwdb' database if you have not done so already. ==== sensors ==== Subpackages: libsensors4 - pwmconfig-handle-fan-input-error.patch: pwmconfig: Deal gracefully with unreadable fan inputs (boo#1181890). - pwmconfig-raise-fan-threshold.patch: pwmconfig: Further raise the fan threshold (boo#1181890). ==== tepl ==== Version update (5.0.1 -> 5.1.1) Subpackages: libtepl-5-0 tepl-5-lang - Update to version 5.1.1: + Add TeplSpaceDrawerPrefs, a preferences widget for GtkSourceSpaceDrawer. + Updated translations. ==== transactional-update ==== Version update (2.28.3 -> 3.1.4) Subpackages: transactional-update-zypp-config - Version 3.1.4 - SELinux: Fix syncing of SELinux attributes when using overlays - SELinux: Tag the overlay directory itself (again) - Version 3.1.3 - Fix overlay syncing on SELinux systems - Fix resuming transactions where the parent does not exist any more - Version 3.1.2 - libtukit: Report when application was terminated due to a signal, and return the signal number as a return value. This will cause the transaction to be aborted when called via `execute`. - libtukit: Set PATH variable for internal commands to fixed value to find the helper applications, as in some environments such as PolicyKit PATH wouldn't be set. - Fix compiler warnings - Version 3.1.1 - Fix hang in tukit on aarch64 [bsc#1181844] - Prevent deletion of snapshots when resuming a snapshot where no transaction is open - Make tukit work in non-dbus environments [boo#1181934] - Version 3.1.0 - t-u: Support installing RPMs from the user's directory again - Adapt selfupdate to new packaging - Implement signal handling - Remove empty text files - Add libselinux build time dependency - Remove RPM version check - Fix libstdc++ filesystem ABI incompatibility by using newer gcc version on old distributions. [boo#1181582] - Rework packaging based on Fedora packaging to separate all the components to remove the intrinsic requirement for Zypper - Version 3.0.0 - This release changes the internal structure, but should be identical to the previous release feature wise. - Major parts of the previous Bash only application have been rewritten in C++ with the goal to provide an API around transactions; the transactional-update script is using that new interface internally already, however the API should be considered experimental for now - if you are interested to use it, please notify us in https://github.com/openSUSE/transactional-update/issues/52 - A new tool called "tukit" provides a C++ tool that can be wrapped by scripts to leverage the functionality. Please consider it experimental for now, the commands may still change. - Bugfixes: - Implement support for system offline update [boo#1180808] - Add statistics files to update environment [boo#1173282] ==== udisks2 ==== Version update (2.9.1 -> 2.9.2) Subpackages: libudisks2-0 libudisks2-0_btrfs udisks2-lang - update to 2.9.2: * udiskslinuxblock: Survive a missing /etc/crypttab * lvm2: Fix leaking BDLVMVDOPooldata * tests: Test modules that are actually enabled during build * build: Exclude VDO module from distcheck build * udisksfstabentry: Add udisks_fstab_entry_has_opt() * udiskslinuxblock: Reflect fstab "noauto" mount option in HintAuto * udiskslinuxblock: Update hints after fstab change * tests: Add tests for Block hints * udiskslinuxfilesystemhelpers: Make TakeOwnership() race free * tests: Extend filesystem test_take_ownership tests with symlinks * mount options: Allow 'nosymfollow' mount option for unprivileged mounts * udisksstate: Silence the block device busy messages on cleanup lock * udev: Distinguish mmcblk-class device types * udev: Propagate mmcblk disk attributes to mmcblk_boot devices * udiskslinuxdrive: Tweak the 'removable'/'ejectable' hints for mmcblk-class devices * udiskslinuxblock: Tweak the hints for mmcblk-class devices * udisksdaemonutil: Refactor udisks_daemon_util_trigger_uevent() out of UDisksLinuxBlockObject * udiskslinuxmanager: Trigger uevent after loop device setup * tests: Remove scsi_debug serial number checks * tests: Skip zram tests if zram module is already loaded * treewide: Fix typos * AUTHORS: Add tbzatek as the maintainer * tests: Do not use nilfs2 as an example of non-resizable FS * Memory leak fixes * doc: Update config file path - drop udisks2-Fix-memory-leaks.patch, udisks2-lvm2-Fix-leaking-BDLVMVDOPooldata.patch (upstream) ==== vte ==== Version update (0.62.2 -> 0.62.3) Subpackages: libvte-2_91-0 typelib-1_0-Vte-2.91 vte-lang - Update to version 0.62.3: + keymap: Use int8_t for the length of the short keymap strings + Revert "lib: Sanitise the passed-in font description" + Updated translations. ==== webkit2gtk3 ==== Version update (2.30.4 -> 2.30.5) Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Update to version 2.30.5: + Bring back the WebKitPluginProcess installation that was removed by mistake. + Fix RunLoop objects leaked in worker threads. + Fix aarch64 llint build with JIT disabled. + Use Internet Explorer quirk for Google Docs. - Drop gir-multilib.patch: fixed upstream. ==== yelp ==== Version update (3.38.2 -> 3.38.3) Subpackages: libyelp0 yelp-lang - Update to version 3.38.3: + Updated translations. ==== yelp-xsl ==== Version update (3.38.2 -> 3.38.3) - Update to version 3.38.3: + Updated translations.

1 0

Tumbleweed - Review of the week 2021/07
by Dominique Leuenberger / DimStar 19 Feb '21

19 Feb '21

Dear Tumbleweed users and hackers, This week might not have seen the highest count of snapshots being published (only 3, 0212, 0215, and 0217), but for sure we reached the highest count of packages to replace on your system and megabytes to transfer this year (so far). We have few reasons to trigger rebuilds of all packages, and most of the time I do that on a glibc update and when we switch the default compiler (in both cases to make use of new technologies). This week, glibc was the ‘guilty’ one. The three snapshots contained the following changes (and more): * glibc 2.33 * Mozilla Thunderbird 78.7.1 * Mozilla Firefox 85.0.1 * Linux kernel 5.10.14 & 5.10.16 * LibreOffice 7.1.0.3 * KDE Plasma 5.21.0 * KDE Frameworks 5.79.0 * postfix 3.5.9: note: the default format for its databases changed from lmdb to bdb; bdb support is in postfix-bdb That is almost everything I promised you last week. Almost! But don’t worry: while we all enjoy a stable, rolling release, the developers keep on submitting new changes. Currently, we are testing the integration of these parts: * Linux kernel 5.11.x * Binutils 2.36 * GNOME 3.38.4 (GNOME 40.beta is being tested in GNOME:Next) * openssl 1.1.1i, based on centralized crypto-policies package * Use GCC 11 as default compiler (Staging:Gcc7) Cheers, Dominique

2 2

apache2: missing groupadd, filup since 2021-02-17 - what's the correct path to dix
by Ralf Lang 19 Feb '21

19 Feb '21

Hello, in a container build on tumbleweed, the apache2 package is now suddenly missing things like groupadd (from shadow package) or fillup (fillup) to install correctly. Now this is not meant as a bug report, i'm just puzzled what I should SR as the correct fix a) make apache2 depend on what it uses and not assume implicit dependencies b) make apache2 no longer depend on groupadd (possible) or fillup (harder) c) just wait for some unrelated change fixing it. -- Ralf Lang Linux Consultant / Developer Tel.: +49-170-6381563 Mail: lang(a)b1-systems.de B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537

2 2

openSUSE Leap 15.3 Beta code-drop deadline is next Wednesday
by Lubos Kocman 18 Feb '21

18 Feb '21

Hello openSUSE! This is a friendly reminder that the code drop deadline for openSUSE Leap 15.3 Beta is next Wednesday 17th of February 15:00 CET. Code drop deadline is in sync with SUSE Linux Enterprise 15 SP3 Public Beta as both milestones are expected to have an identical core, therefore the deadlines must be the same. https://en.opensuse.org/openSUSE:Roadmap (was corrected to reflect the change). ** Buffer for SUSE:SLE submissions** I've checked and there, are currently no new community submit requests against packages from SUSE:SLE* projects. However, I'd like to ask contributors to submit submissions against SUSE:SLE* packages with some buffer as suse-sle-reviewers have to approve them first before they're visible to SLE friends. This needs to be done before the actual deadline. Also, don't forget to reference issues for SLE submissions or we'll have to ask for resubmit. ** Note on new packages ** If you're a bit late and you still want to submit a new package to Leap then please submit it directly to openSUSE:Backports:SLE-15-SP3 as our SR redirection that is in place for openSUSE:Leap:15.3 would not be able to guess the destination project by non-existing package origin (this should be either SLE or Backports, or Leap for KPIs and branding packages). Why Backports? Starting with openSUSE Leap 15.3 the openSUSE Backports is where we build community part of openSUSE Leap 15.3. ** What about docs?** I've updated https://en.opensuse.org/openSUSE:Packaging_for_Leap to match the changes in openSUSE Leap 15.3 introduced by the Jump prototype, including suse-sle-reviewers, mirroring, and blacklist information. I would appreciate any help to shape up the page or make the information more clear or accessible. Thank you! -- Best regards Lubos Kocman Release Manager openSUSE Leap SUSE LINUX, s.r.o. Krizikova 148/34 tel: +49 173 5876850 186 00 Praha 8 http://www.suse.com Czech Republic

6 8

Leap does not support AMD gpus
by Donald Leslie 17 Feb '21

17 Feb '21

I do not know if this where I should start. I have used SuSE since the days of the Atlanta Linux Showcase. There developer ( He was referred to as the IDE guy) got SuSE to work on my laptop. He spent some time poking at it. He said go to the booth and buy a copy and I will have it working for the next release. Which he did. I have been running SuSE ever since, mostly on HP Business laptops. It has always worked fine until now. I have a HP 855 G7 which has an AMD cpu and a AMD gpu. I am running Leap 15.2 which still has a 5.3. ... kernel. I believe this also true for 15.3 . I know Leap is meant to be stable but that should not mean not working. The laptop display worked but the HDMI port was not usable. After much pain I added the kernel/stable repository which provided a much later kernel and I can now talk to HDMI displays. Also the physical buttons on the touchpad now work. The Leap install was painful since the installer had even more issues with the touchpad. This install was the first distribution which did not properly support current hardware. Maybe SuSE releases should state that they may not support current computers. Out of curiosity I also tried the Enterprise desktop product. It had more issues than Leap. Tumbleweed also works since it also has a later kernel

7 6

NumPy 1.20 dropped support for Python 3.6
by Ben Greiner 17 Feb '21

17 Feb '21

Dear Python packagers, maintainers, hackers, users, here is another mailinglist post which unevitably people tend to not see and start to complain about later: NumPy 1.20 was merged into openSUSE:Factory standard yesterday. The next released Tumbleweed snapshots will have it too. Relevant for end users: ----------------------- A few packages are not ready for NumPy 1.20 yet. Numba 0.51 is one example. If this is relevant for you, don't zypper dup your system yet. Relevant for package maintainers: --------------------------------- While we already fixed some of the fallout from SciPy 1.6.0, the number of unresolvable packages in openSUSE:Factory standard is now back at 265. Many of them because they cannot find python36-numpy. A few more because of OpenStack packages not supporting multiple python3 flavors. Dirk Müller is already working on that. This is the relevant thread on python(a)lists.opensuse.org with suggestions how to deal with it: https://lists.opensuse.org/archives/list/python@lists.opensuse.org/message/… While getting NumPy 1.20 ready for Ring1 staging, I noticed that most of the packages initially failing do actually not have hard requirements on NumPy. In those cases it is enough to keep the python36 flavor, but not try to install python36-numpy. %python_module now has a handy capability to support RPM's boolean dependencies to achieve this: BuildRequires: %{python_module numpy if (%python-base without python36-base)} If necessary, tell pytest to skip numpy relevant tests then. But many upstream packages already skip the tests automatically. The same principle goes for SciPy, Matplotlib, Pandas and so on. If NumPy is indeed a hard requirement for the package, just `%define skip_python36 1`. And please take care of depending packages as well. Happy coding, Ben Am 10.02.21 um 23:20 schrieb Ben Greiner: > Dear Python packagers, > > Am 16.01.21 um 21:43 schrieb Ben Greiner: >> Am 26.12.20 um 16:01 schrieb Ben Greiner: >>> - If upstream does not support python 3.6 anymore (Numpy already >>> deprecates to support it in new releases, according to NEP 29 [5]) you >>> can use `%define skip_python36 1`. All depending packages need to do >>> the >>> same. Alternatively a branched package can provide an older version for >>> this flavor, e.g. python-ipython715 has been created to provide the >>> last >>> version which support Python 3.6. >>> >>> >>> [5] https://numpy.org/neps/nep-0029-deprecation_policy.html >>> >> SciPy's recent update to 1.6.0 already dropped support for Python 3.6. >> Luckily for us, the update is stuck in Staging:I, and :N got merged >> before it. But in order to move on in the spirit of Tumbleweed, we need >> to `%define skip_python36 1` in python-scipy. As a consequence, all >> packages requiring python-scipy need to do the same. > > This just happened: python-scipy 1.6.0 has been merged into > openSUSE:Factory today. There is no longer a python36-scipy , and > packages depending on SciPy, which are in Ring1, also already skip the > build. Scikit-image and networkx are notable mentions. So do many > packages in devel:languages:python:numeric. Due to the drop, the count > of unresolvable packages in Factory rose from just below 100 to 184. > Please check you python packages now and skip the python36 build if > necessary. Please keep your singlespec definitions, so that a new > python39 flavor in the (hopefully near) future can pick up, where we > just left.

1 0

New Tumbleweed snapshot 20210215 released!
by Dominique Leuenberger 17 Feb '21

17 Feb '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: ImageMagick (7.0.10.59 -> 7.0.10.62) MozillaFirefox (85.0 -> 85.0.1) apparmor bison bluedevil5 (5.20.5 -> 5.21.0) boost-base boost-extra breeze (5.20.5 -> 5.21.0) breeze-gtk (5.20.5 -> 5.21.0) discover (5.20.5 -> 5.21.0) drkonqi5 (5.20.5 -> 5.21.0) gnome-disk-utility (3.38.1 -> 3.38.2) gsl gstreamer-plugins-bad inn kactivitymanagerd (5.20.5 -> 5.21.0) kcm_sddm (5.20.5 -> 5.21.0) kde-cli-tools5 (5.20.5 -> 5.21.0) kernel-firmware (20210119 -> 20210208) kernel-source (5.10.14 -> 5.10.16) kgamma5 (5.20.5 -> 5.21.0) khotkeys5 (5.20.5 -> 5.21.0) kinfocenter5 (5.20.5 -> 5.21.0) kmenuedit5 (5.20.5 -> 5.21.0) kmod kscreen5 (5.20.5 -> 5.21.0) kscreenlocker (5.20.5 -> 5.21.0) ksshaskpass5 (5.20.5 -> 5.21.0) ksysguard5 (5.20.5 -> 5.21.0) kwayland-integration (5.20.5 -> 5.21.0) kwayland-server (5.20.5 -> 5.21.0) kwin5 (5.20.5 -> 5.21.0) kwrited5 (5.20.5 -> 5.21.0) libapparmor libkdecoration2 (5.20.5 -> 5.21.0) libkscreen2 (5.20.5 -> 5.21.0) libksysguard5 (5.20.5 -> 5.21.0) liblastfm-qt5 libqca-qt5 (2.3.1 -> 2.3.2) libqt5-qtwebengine libquvi-scripts libressl (3.2.3 -> 3.2.4) meld (3.20.2 -> 3.20.3) milou5 (5.20.5 -> 5.21.0) mozc (2.25.4150.102 -> 2.26.4276.102) oxygen5 (5.20.5 -> 5.21.0) pango (1.48.1 -> 1.48.2) perl-Bootloader (0.932 -> 0.933) perl-Mojolicious (8.72 -> 8.73) plasma-browser-integration (5.20.5 -> 5.21.0) plasma-nm5 (5.20.5 -> 5.21.0) plasma5-addons (5.20.5 -> 5.21.0) plasma5-desktop (5.20.5 -> 5.21.0) plasma5-disks (5.20.5 -> 5.21.0) plasma5-integration (5.20.5 -> 5.21.0) plasma5-openSUSE plasma5-pa (5.20.5 -> 5.21.0) plasma5-thunderbolt (5.20.5 -> 5.21.0) plasma5-workspace (5.20.5 -> 5.21.0) polkit-kde-agent-5 (5.20.5 -> 5.21.0) poppler (21.01.0 -> 21.02.0) poppler-qt5 (21.01.0 -> 21.02.0) powerdevil5 (5.20.5 -> 5.21.0) publicsuffix (20210128 -> 20210211) python-flufl.lock (3.2 -> 5.0.4) python-requests python-tornado6 python38 python38-core python38-documentation qemu rpm sendmail systemsettings5 (5.20.5 -> 5.21.0) thunar (4.16.2 -> 4.16.3) unbound (1.13.0 -> 1.13.1) xdg-desktop-portal-kde (5.20.5 -> 5.21.0) xfce4-taskmanager (1.4.1 -> 1.4.2) xtables-addons (3.12_k5.10.14_1 -> 3.15_k5.10.16_1) xterm (363 -> 366) === Details === ==== ImageMagick ==== Version update (7.0.10.59 -> 7.0.10.62) Subpackages: ImageMagick-config-7-SUSE ImageMagick-extra - version update to 7.0.10.62 * -trim not working as expected (reference https://github.com/ImageMagick/ImageMagick/discussions/3172) * possible undefined behavior (reference https://github.com/ImageMagick/ImageMagick/issues/3195) * sanitize buggy ascender and descender values (reference https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=980202) * dng:decode element in delegates.xml quoted incorrectly (reference https://github.com/ImageMagick/ImageMagick/issues/3156) * Extract GPS info from TIFF images (reference https://github.com/ImageMagick/ImageMagick/issues/3167) * Revert tieing MagickFloatType to double (reference https://github.com/ImageMagick/ImageMagick/pull/2832) * revert configure script for validating JXL delegate library. * the distributed pixel cache now properly deserializes the image attributes. ==== MozillaFirefox ==== Version update (85.0 -> 85.0.1) Subpackages: MozillaFirefox-translations-common - Mozilla Firefox 85.0.1 MFSA 2021-06 (bsc#1181848) * MOZ-2021-0001 (bmo#1676636) Buffer overflow in depth pitch calculations for compressed textures * Fixed: Avoid printing an extra blank page at the end of some documents (bmo#1689789). * Fixed: Fixed a browser crash in case of unexpected Cache API state (bmo#1684838). ==== apparmor ==== Subpackages: apparmor-abstractions apparmor-docs apparmor-parser apparmor-parser-lang apparmor-profiles apparmor-utils apparmor-utils-lang pam_apparmor pam_apparmor-32bit python3-apparmor - merge libapparmor.changes into apparmor.changes ==== bison ==== Subpackages: bison-lang - Run tests in parallel ==== bluedevil5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: bluedevil5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here ==== boost-base ==== Subpackages: boost-license1_75_0 libboost_date_time1_75_0 libboost_filesystem1_75_0 libboost_iostreams1_75_0 libboost_locale1_75_0 libboost_program_options1_75_0 libboost_regex1_75_0 libboost_thread1_75_0 - Fix HPC build on ARM. It seems boost_serialization libraries are no longer implicitly build with this setup. - Add build support for gcc10 to HPC build (bsc#1174439). - Add openmpi4 flavors (jsc#SLE-16462). ==== boost-extra ==== - Fix HPC build on ARM. It seems boost_serialization libraries are no longer implicitly build with this setup. - Add build support for gcc10 to HPC build (bsc#1174439). - Add openmpi4 flavors (jsc#SLE-16462). ==== breeze ==== Version update (5.20.5 -> 5.21.0) Subpackages: breeze5-cursors breeze5-decoration breeze5-style breeze5-style-lang breeze5-wallpapers libbreezecommon5-5 - Disable the migration from the breeze color scheme to breeze. On fresh installations, the LNF is applied afterwards and so it has no effect. Switching the color scheme in the LNF would need an almost complete reneedling, so don't do that just yet. - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Clean up listener (kde#432660) * Update users that have Breeze as colorscheme to BreezeLight (kde#432470) * Fix colors files * Don't waste a space in menus * [kstyle]: Don't attempt to adjust contentsMargins on QDialogs * [kstyle]: Don't attempt to adjust contentsMargins on QMainWindows (kde#432246) * kstyle: expand tools area 1px downwards if present (kde#431540) * [kstyle]: Don't draw line when no toolbars are present in fullscreen (kde#431969) * hotfix: remove hasHeaderColors call from ::polish * Revert "Do not draw background or line in toolbars if the color scheme has no headers group" * kde4breeze: Breeze Light is the new default (kde#431917) - Only Recommend breeze5-wallpapers, it's fairly big and by default (openSUSE look-and-feel) not used - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here ==== breeze-gtk ==== Version update (5.20.5 -> 5.21.0) Subpackages: gtk2-metatheme-breeze gtk3-metatheme-breeze metatheme-breeze-common - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Fix breakages caused by formatter run (kde#432245) * Adjust menu heights to properly match Breeze QStyle (kde#431819) * gtk4: remove margin on windows (kde#431930) - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * fix(widgets/treeview): fix unlegiblity of disabled treeview items (kde#431839) * gtk3: Fix close button icon * Increase menu padding to reflect changes in Breeze * gtk3, gtk4: remove hover animations * Breeze for GTK4 * Run formatter * [gtk3]: Make scrollbars fixed size (kde#414763) ==== discover ==== Version update (5.20.5 -> 5.21.0) Subpackages: discover-backend-flatpak discover-backend-fwupd discover-backend-packagekit discover-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Do not always bring refreshed resources in (kde#432654) * Don't show the search action on desktop mode (kde#432693) * pk: Don't call the size function as it triggers a details fetch * pk: no need to fetch the details of the updatable packages * odrs: Move JSON parsing to a separate thread * pk: Small optimisation * pk: Make sure that we give precedence to the first pkgid we receive * pk: remove unused method * pk: Make sure we execute absolute paths * flatpak: Make sure we refresh the size display on the views * Show a "Search" main action on mobile on the Featured page * Do not show "Sorry, nothing found" on the search page before searching * pk: also remove duplicates from accounnting for the offline upgrades * [Updates page] Match style of Kirigami.PlaceholderMessage * pk: Fix installed filtering (kde#428681) * packagekit: Don't list repeated packages several times * pk: sort the updated package in offline updates description - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here - Refresh 0001-Warning-for-FlatHub.patch ==== drkonqi5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: drkonqi5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * discard wayland client crashes following compositor crash (kde#431561) * Fix includes order on windows * Update .gitignore file * Add pre-commit hook for clang-format * Add .git-blame-ignore-revs file * Run clang-format * Prevent clang-format uglification - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Remove duplicate line * include the drkonqi version in reports * report all reproducible selections * capitalize consistently * Layout have already a parent. Not necessary to call this method * Don't include QtTest * Modify DBus service name to allow using QDBusServiceWatcher * fix warning about unused capture * focus lineedits for bug info page (kde#428350) * Fix for Clang: ptracer.cpp needs <errno.h> * fix buttongroup state toggles (kde#428346) * Port from QStandardPaths::DataLocation to QStandardPaths::AppDataLocation * Don't use deprecated signal * If include is define in .h remove it if it's defined in .cpp too (scripted) * Remove this add_definition * Compile without deprecated method * Add .gitignore file * it depends against kf5.74 * it depends against qt5.15 * Remove not implemented method * [systeminformation] Fix cpp17+ compatibility * Remove unused forward declaration * Convert copyright statements to SPDX expressions ==== gnome-disk-utility ==== Version update (3.38.1 -> 3.38.2) Subpackages: gnome-disk-utility-lang - Update to version 3.38.2: + Ignore the --xid option when formatting from Nautilus (this aligns the behavior under X11 with that on Wayland). + Updated translations. ==== gsl ==== Subpackages: libgsl25 libgslcblas0 - Add support for gcc8 and gcc9 builds for HPC (jsc#SLE-7766, jsc#SLE-8604). - Add build support for gcc10 to HPC build (bsc#1174439). ==== gstreamer-plugins-bad ==== Subpackages: gstreamer-plugins-bad-lang gstreamer-transcoder libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstcodecs-1_0-0 libgstisoff-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgstsctp-1_0-0 libgsttranscoder-1_0-0 libgsturidownloader-1_0-0 libgstvulkan-1_0-0 libgstwayland-1_0-0 libgstwebrtc-1_0-0 typelib-1_0-GstTranscoder-1_0 - Disable the kate/libtiger plugin. Kate streams for karaoke are not used anymore, and the source tarball for libtiger is no longer available upstream. ==== inn ==== - Fixes for %_libexecdir changing to /usr/libexec (bsc#1174075) ==== kactivitymanagerd ==== Version update (5.20.5 -> 5.21.0) Subpackages: kactivitymanagerd-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Add trailing comma to enums * Fix Boot dependency problems and cleanup old configs * If include is define in .h remove it if it's defined in .cpp too (scripted) * Fix a dangling reference to the list of database files * Explicit lambda captures to avoid future dangling reference bugs * Fix a dangling reference to the list of database files * Convert copyright statements to SPDX expressions * Explicitly scope unit to graphical-session.target * Fix installation of the systemd unit * Use correct way to register for a shortcut (kde#374575) * systemd dbus activation ==== kcm_sddm ==== Version update (5.20.5 -> 5.21.0) Subpackages: kcm_sddm-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Set index on completion instead of binding (kde#432018) * Indicate that we need saving when background changes (kde#432112) - Refresh 0001-Support-default.session-symlink.patch - Add support for qml-autoreqprov - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Update .gitignore file * Add pre-commit hook for clang-format * Add .git-blame-ignore-revs file * clang-tidy: Force braces around statements * Run clang-format * Fix i18n (found by Alexander Yavorsky) * Simplify Messages.sh * Restore old SDDM KCM name * Port to ManagedConfigModule (kde#403530,kde#407689,kde#411004,kde#411504,kde#419327,kde#424639) * Load all themes * Do not explicitely define Exec line for KCM - New patchset for the QML code changes: * Refresh 0001-Support-default.session-symlink.patch * Drop 0002-Replace-autologin-configuration-with-a-note-to-use-Y.patch * Add 0002-Read-and-write-autologin-user-to-etc-sysconfig-displ.patch * Refresh 0003-Don-t-add-a-Wayland-suffix-to-Wayland-sessions.patch ==== kde-cli-tools5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: kde-cli-tools5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Update .gitignore * Add pre-commit hook for clang-format * Add .git-blame-ignore-revs file * Run clang-format * Prevent clang-format uglification * Add .gitignore file to ignore generated .clang-format file * kioclient: add "appmenu" command to use a kopenwith dialog as a basic launcher * Require C++17 * Avoid pointless KCModuleInfo usage * If include is define in .h remove it if it's defined in .cpp too (scripted) * Do not explicitely define Exec line for KCM * Now it depends against new version. Old code can be removed * Partly port away from KMimeTypeTrader * Documentation fixes * Ignore options after positional arguments (kde#426896) ==== kernel-firmware ==== Version update (20210119 -> 20210208) Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-ath11k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-prestera kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network ucode-amd - Update to version 20210208 (commit b79d2396bc63): * Mellanox: Add new mlxsw_spectrum firmware xx.2008.2304 * linux-firmware: add firmware for MT7921 * rtw88: RTL8821C: Update firmware to v24.8 * linux-firmware: Update firmware file for Intel Bluetooth AX210 * linux-firmware: Update firmware file for Intel Bluetooth AX200 * linux-firmware: Update firmware file for Intel Bluetooth AX201 * i915: Add DMC v2.01 for ADL-S * i915: Add HuC v7.7.1 for DG1 * i915: Add GuC v49.0.1 for DG1 * qcom: Add venus firmware files for VPU-1.0 * qcom: Add SM8250 Compute DSP firmware * qcom: Add SM8250 Audio DSP firmware * qcom: add firmware files for Adreno a650 ==== kernel-source ==== Version update (5.10.14 -> 5.10.16) Subpackages: kernel-default kernel-docs - Linux 5.10.16 (bsc#1012628). - squashfs: add more sanity checks in xattr id lookup (bsc#1012628). - squashfs: add more sanity checks in inode lookup (bsc#1012628). - squashfs: add more sanity checks in id lookup (bsc#1012628). - squashfs: avoid out of bounds writes in decompressors (bsc#1012628). - Revert "mm: memcontrol: avoid workload stalls when lowering memory.high" (bsc#1012628). - nilfs2: make splice write available again (bsc#1012628). - drm/i915: Skip vswing programming for TBT (bsc#1012628). - drm/i915: Fix ICL MG PHY vswing handling (bsc#1012628). - bpf: Fix verifier jsgt branch analysis on max bound (bsc#1012628). - bpf: Fix 32 bit src register truncation on div/mod (bsc#1012628). - bpf: Fix verifier jmp32 pruning decision logic (bsc#1012628). - regulator: Fix lockdep warning resolving supplies (bsc#1012628). - blk-cgroup: Use cond_resched() when destroy blkgs (bsc#1012628). - i2c: mediatek: Move suspend and resume handling to NOIRQ phase (bsc#1012628). - SUNRPC: Handle 0 length opaque XDR object data properly (bsc#1012628). - SUNRPC: Move simple_get_bytes and simple_get_netobj into private header (bsc#1012628). - iwlwifi: queue: bail out on invalid freeing (bsc#1012628). - iwlwifi: mvm: guard against device removal in reprobe (bsc#1012628). - iwlwifi: pcie: add rules to match Qu with Hr2 (bsc#1012628). - iwlwifi: mvm: invalidate IDs of internal stations at mvm start (bsc#1012628). - iwlwifi: pcie: fix context info memory leak (bsc#1012628). - iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap (bsc#1012628). - iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time() (bsc#1012628). - iwlwifi: mvm: skip power command when unbinding vif during CSA (bsc#1012628). - ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E (bsc#1012628). - ASoC: ak4458: correct reset polarity (bsc#1012628). - ALSA: hda: intel-dsp-config: add PCI id for TGL-H (bsc#1012628). - pNFS/NFSv4: Improve rejection of out-of-order layouts (bsc#1012628). - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() (bsc#1012628). - chtls: Fix potential resource leak (bsc#1012628). - ASoC: Intel: Skylake: Zero snd_ctl_elem_value (bsc#1012628). - mac80211: 160MHz with extended NSS BW in CSA (bsc#1012628). - drm/nouveau/nvif: fix method count when pushing an array (bsc#1012628). - ASoC: wm_adsp: Fix control name parsing for multi-fw (bsc#1012628). - regulator: core: avoid regulator_resolve_supply() race condition (bsc#1012628). - af_key: relax availability checks for skb size calculation (bsc#1012628). - powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semantics (bsc#1012628). - gpiolib: cdev: clear debounce period if line set to output (bsc#1012628). - io_uring: drop mm/files between task_work_submit (bsc#1012628). - io_uring: reinforce cancel on flush during exit (bsc#1012628). - io_uring: fix sqo ownership false positive warning (bsc#1012628). - io_uring: fix list corruption for splice file_get (bsc#1012628). - io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE (bsc#1012628). - io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE (bsc#1012628). - io_uring: replace inflight_wait with tctx->wait (bsc#1012628). - io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE (bsc#1012628). - io_uring: if we see flush on exit, cancel related tasks (bsc#1012628). - io_uring: account io_uring internal files as REQ_F_INFLIGHT (bsc#1012628). - io_uring: fix files cancellation (bsc#1012628). - io_uring: always batch cancel in *cancel_files() (bsc#1012628). - io_uring: pass files into kill timeouts/poll (bsc#1012628). - io_uring: don't iterate io_uring_cancel_files() (bsc#1012628). - io_uring: add a {task,files} pair matching helper (bsc#1012628). - io_uring: simplify io_task_match() (bsc#1012628). - commit 11381f3 - Update config files: enable CONFIG_SERIAL_DEV_CTRL_TTYPORT on x86 (bsc#1182035) For supporting MS Surface devices. This required CONFIG_SERIAL_DEV_BUS to be built-in. Also this allowed CONFIG_BT_HCIUART_BCM=y as well. - commit 2d8fb7a - media: pwc: Use correct device for DMA (bsc#1181133). - commit 4a7417d - Drop pwc fix patch; it'll be replaced with the upstream fix (bsc#1181133) - commit 2202405 - Update config files: armv7hl: Set ledtrig-default-on as builtin (bsc#1182128) - commit d24d9b2 - btrfs: fix crash after non-aligned direct IO write with O_DSYNC (bsc#1181605). - commit 9e44573 - Update config files: Set ledtrig-default-on as builtin (bsc#1182128) - commit 7119d5a - Update config files. Enable DWC3 on x86_64 DWC3 is now needed on x86_64, too, with the added benefit of making x86_64 and ARM64 closer (jsc#SLE-14042) - commit 7cc21b5 - Linux 5.10.15 (bsc#1012628). - USB: serial: cp210x: add pid/vid for WSDA-200-USB (bsc#1012628). - USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000 (bsc#1012628). - USB: serial: option: Adding support for Cinterion MV31 (bsc#1012628). - usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720 (bsc#1012628). - USB: gadget: legacy: fix an error code in eth_bind() (bsc#1012628). - usb: gadget: aspeed: add missing of_node_put (bsc#1012628). - USB: usblp: don't call usb_set_interface if there's a single alt (bsc#1012628). - usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop() (bsc#1012628). - usb: dwc2: Fix endpoint direction check in ep_from_windex (bsc#1012628). - usb: dwc3: fix clock issue during resume in OTG mode (bsc#1012628). - usb: xhci-mtk: fix unreleased bandwidth data (bsc#1012628). - usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints (bsc#1012628). - usb: xhci-mtk: break loop when find the endpoint to drop (bsc#1012628). - ARM: OMAP1: OSK: fix ohci-omap breakage (bsc#1012628). - arm64: dts: qcom: c630: keep both touchpad devices enabled (bsc#1012628). - Input: i8042 - unbreak Pegatron C15B (bsc#1012628). - arm64: dts: amlogic: meson-g12: Set FL-adj property value (bsc#1012628). - arm64: dts: rockchip: fix vopl iommu irq on px30 (bsc#1012628). - arm64: dts: rockchip: Use only supported PCIe link speed on Pinebook Pro (bsc#1012628). - ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect (bsc#1012628). - ARM: dts: stm32: Connect card-detect signal on DHCOM (bsc#1012628). - ARM: dts: stm32: Disable WP on DHCOM uSD slot (bsc#1012628). - ARM: dts: stm32: Disable optional TSC2004 on DRC02 board (bsc#1012628). - ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 (bsc#1012628). - vdpa/mlx5: Fix memory key MTT population (bsc#1012628). - bpf, cgroup: Fix optlen WARN_ON_ONCE toctou (bsc#1012628). - bpf, cgroup: Fix problematic bounds check (bsc#1012628). - bpf, inode_storage: Put file handler if no storage was found (bsc#1012628). - um: virtio: free vu_dev only with the contained struct device (bsc#1012628). - bpf, preload: Fix build when $(O) points to a relative path (bsc#1012628). - arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4 (bsc#1012628). - r8169: work around RTL8125 UDP hw bug (bsc#1012628). - rxrpc: Fix deadlock around release of dst cached on udp tunnel (bsc#1012628). - arm64: dts: ls1046a: fix dcfg address range (bsc#1012628). - SUNRPC: Fix NFS READs that start at non-page-aligned offsets (bsc#1012628). - igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr (bsc#1012628). - igc: check return value of ret_val in igc_config_fc_after_link_up (bsc#1012628). - i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues" (bsc#1012628). - ibmvnic: device remove has higher precedence over reset (bsc#1012628). - net/mlx5: Fix leak upon failure of rule creation (bsc#1012628). - net/mlx5e: Update max_opened_tc also when channels are closed (bsc#1012628). - net/mlx5e: Release skb in case of failure in tc update skb (bsc#1012628). - net: lapb: Copy the skb before sending a packet (bsc#1012628). - net: mvpp2: TCAM entry enable should be written after SRAM data (bsc#1012628). - r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set (bsc#1012628). - net: ipa: pass correct dma_handle to dma_free_coherent() (bsc#1012628). - ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode (bsc#1012628). - nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUs (bsc#1012628). - vdpa/mlx5: Restore the hardware used index after change map (bsc#1012628). - memblock: do not start bottom-up allocations with kernel_end (bsc#1012628). - kbuild: fix duplicated flags in DEBUG_CFLAGS (bsc#1012628). - thunderbolt: Fix possible NULL pointer dereference in tb_acpi_add_link() (bsc#1012628). - ovl: fix dentry leak in ovl_get_redirect (bsc#1012628). - ovl: avoid deadlock on directory ioctl (bsc#1012628). - ovl: implement volatile-specific fsync error behaviour (bsc#1012628). - mac80211: fix station rate table updates on assoc (bsc#1012628). - gpiolib: free device name on error path to fix kmemleak (bsc#1012628). - fgraph: Initialize tracing_graph_pause at task creation (bsc#1012628). - tracing/kprobe: Fix to support kretprobe events on unloaded modules (bsc#1012628). - kretprobe: Avoid re-registration of the same kretprobe earlier (bsc#1012628). - tracing: Use pause-on-trace with the latency tracers (bsc#1012628). - tracepoint: Fix race between tracing and removing tracepoint (bsc#1012628). - libnvdimm/namespace: Fix visibility of namespace resource attribute (bsc#1012628). - libnvdimm/dimm: Avoid race between probe and available_slots_show() (bsc#1012628). - genirq: Prevent [devm_]irq_alloc_desc from returning irq 0 (bsc#1012628). - genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set (bsc#1012628). - scripts: use pkg-config to locate libcrypto (bsc#1012628). - xhci: fix bounce buffer usage for non-sg list case (bsc#1012628). - RISC-V: Define MAXPHYSMEM_1GB only for RV32 (bsc#1012628). - cifs: report error instead of invalid when revalidating a dentry fails (bsc#1012628). - iommu: Check dev->iommu in dev_iommu_priv_get() before dereferencing it (bsc#1012628). - smb3: Fix out-of-bounds bug in SMB2_negotiate() (bsc#1012628). - smb3: fix crediting for compounding when only one request in flight (bsc#1012628). - mmc: sdhci-pltfm: Fix linking err for sdhci-brcmstb (bsc#1012628). - mmc: core: Limit retries when analyse of SDIO tuples fails (bsc#1012628). - Fix unsynchronized access to sev members through svm_register_enc_region (bsc#1012628). - drm/dp/mst: Export drm_dp_get_vc_payload_bw() (bsc#1012628). - drm/i915: Fix the MST PBN divider calculation (bsc#1012628). - drm/i915/gem: Drop lru bumping on display unpinning (bsc#1012628). - drm/i915/gt: Close race between enable_breadcrumbs and cancel_breadcrumbs (bsc#1012628). - drm/i915/display: Prevent double YUV range correction on HDR planes (bsc#1012628). - drm/i915: Extract intel_ddi_power_up_lanes() (bsc#1012628). - drm/i915: Power up combo PHY lanes for for HDMI as well (bsc#1012628). - drm/amd/display: Revert "Fix EDID parsing after resume from suspend" (bsc#1012628). - io_uring: don't modify identity's files uncess identity is cowed (bsc#1012628). - nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs (bsc#1012628). - KVM: SVM: Treat SVM as unsupported when running as an SEV guest (bsc#1012628). - KVM: x86/mmu: Fix TDP MMU zap collapsible SPTEs (bsc#1012628). - KVM: x86: Allow guests to see MSR_IA32_TSX_CTRL even if tsx=off (bsc#1012628). - KVM: x86: fix CPUID entries returned by KVM_GET_CPUID2 ioctl (bsc#1012628). - KVM: x86: Update emulator context mode if SYSENTER xfers to 64-bit mode (bsc#1012628). - KVM: x86: Set so called 'reserved CR3 bits in LM mask' at vCPU reset (bsc#1012628). - DTS: ARM: gta04: remove legacy spi-cs-high to make display work again (bsc#1012628). - ARM: dts; gta04: SPI panel chip select is active low (bsc#1012628). - ARM: footbridge: fix dc21285 PCI configuration accessors (bsc#1012628). - ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor (bsc#1012628). - mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page (bsc#1012628). - mm: hugetlb: fix a race between freeing and dissolving the page (bsc#1012628). - mm: hugetlb: fix a race between isolating and freeing page (bsc#1012628). - mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active (bsc#1012628). - mm, compaction: move high_pfn to the for loop scope (bsc#1012628). - mm/vmalloc: separate put pages and flush VM flags (bsc#1012628). - mm: thp: fix MADV_REMOVE deadlock on shmem THP (bsc#1012628). - mm/filemap: add missing mem_cgroup_uncharge() to __add_to_page_cache_locked() (bsc#1012628). - x86/build: Disable CET instrumentation in the kernel (bsc#1012628). - x86/debug: Fix DR6 handling (bsc#1012628). - x86/debug: Prevent data breakpoints on __per_cpu_offset (bsc#1012628). - x86/debug: Prevent data breakpoints on cpu_dr7 (bsc#1012628). - x86/apic: Add extra serialization for non-serializing MSRs (bsc#1012628). - Input: goodix - add support for Goodix GT9286 chip (bsc#1012628). - Input: xpad - sync supported devices with fork on GitHub (bsc#1012628). - Input: ili210x - implement pressure reporting for ILI251x (bsc#1012628). - md: Set prev_flush_start and flush_bio in an atomic way (bsc#1012628). - igc: Report speed and duplex as unknown when device is runtime suspended (bsc#1012628). - neighbour: Prevent a dead entry from updating gc_list (bsc#1012628). - net: ip_tunnel: fix mtu calculation (bsc#1012628). - udp: ipv4: manipulate network header of NATed UDP GRO fraglist (bsc#1012628). - net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add (bsc#1012628). - net: sched: replaced invalid qdisc tree flush helper in qdisc_replace (bsc#1012628). - commit 24c2efe - Update patches.kernel.org/5.10.13-143-vsock-fix-the-race-conditions-in-multi-trans… (bsc#1012628 bsc#1181806 CVE-2021-26708). Add CVE number. - commit bf327d1 - config: arm64: Use y for CLK_RK3399 This is to fix booting on RK3399 systems (JeOS-rockpi4) When compiled as 'm' there are lots of errors related to clk and no host mmc controler initialized. - commit 52fdc54 ==== kgamma5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: kgamma5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Update .gitignore file * Add pre-commit hook for clang-format * Add .git-blame-ignore-revs file * clang-tidy: Force braces around statements * Run clang-format * Be more consistent with includes and do not break when reordering them * Do not explicitely define Exec line for KCM * If include is define in .h remove it if it's defined in .cpp too (scripted) * Convert copyright statements to SPDX statements * Documentation fixes: Sync GUI messages ==== khotkeys5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: khotkeys5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Use xtest also for sending input to the active window * Handle modifier keys with xtest in ShortcutsHandler::send_macro_key * Fix unterminated SPDX comments after last commit, fixes build * Convert copyright statements to SPDX expressions * Add .gitignore file to ignore generated .clang-format * Drop unused KF5Plasma dependency * Fix import of files (kde#428536) * Do not explicitly define Exec line for KCM * If include is define in .h remove it if it's defined in .cpp too (scripted) * Documentation fixes - Drop patches, now upstream: * 0001-Handle-modifier-keys-with-xtest-in-ShortcutsHandler-.patch * 0002-Use-xtest-also-for-sending-input-to-the-active-windo.patch ==== kinfocenter5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: kinfocenter5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * About-distro: display Graphics Platform (X11 or Wayland) (kde#428382) - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Port away from QRegExp * typo-- * Remove unused includes * weight main categories properly (kde#429153) * If include is define in .h remove it if it's defined in .cpp too (scripted) * Now it depends against new version. Old code can be removed * Remove not implemented method * Use more correct factory name * Fix SolDevice null pointer dereference * Update device info on selection change instead of activation * There is no need for static local variables * Documentation fixes * Use correct name for new Samba Status module * port samba module to qml * Fix minor typos * [modules/nics] Use consistent name everywhere * Port nic info center module to QML ==== kmenuedit5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: kmenuedit5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Autogenerate categories file * operator+/- is disabled for QFlags in qt6 * ui.rc files: consistenly use <gui> instead of deprecated <kpartgui> * If include is define in .h remove it if it's defined in .cpp too (scripted) ==== kmod ==== Subpackages: kmod-bash-completion libkmod2 - Fix tests to not test disabled features. Disable zstd again. + kmod-populate-modules-Use-more-bash-more-quotes.patch + kmod-testsuite-compress-modules-if-feature-is-enabled.patch + kmod-also-test-xz-compression.patch ==== kscreen5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: kscreen5-lang kscreen5-plasmoid - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Fix osd actions not working * Fix rotation direction after change in libkscreen * [kcm] Limit maximum device combobox length (kde#432249) - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Add pre-commit hook for clang-format * Add .git-blame-ignore-revs file * clang-tidy: Force braces around statements * Run clang-format * Update .gitignore file * Add trailing comma to enums * Make orientation icons more obvious in KScreen * Autogenerate categories file * Remove unused include * Fix Connections warnings * Print debug information when something failed * Skip unneeded copies * daemon: improve consistency of the lid behaviour * Address constness of objects * If include is define in .h remove it if it's defined in .cpp too (scripted) * Do not explicitely define Exec line for KCM * refactor(kded): refactor OSD * fix(kded): move to kdirwatch to reduce inotify footprint ==== kscreenlocker ==== Version update (5.20.5 -> 5.21.0) Subpackages: kscreenlocker-lang libKScreenLocker5 - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Add .gitignore file to ignore generated .clang-format * Fix catalog name (found by Victor Ryzhykh) * Fix view geometry updates when screens added/removed (kde#347934) * KCM KScreenLocker highlight non default settings * operator+/- is disabled for QFlags in qt6 * delay quit after successful password * Use QuickControls 2 StackView (kde#429290) * actually replace wallaper pages * Use QuickControls 2 StackView (kde#429290) * Lock the screen if necessary when connecting to logind * Require C++17 * Do not explicitly define Exec line for KCM * If include is define in .h remove it if it's defined in .cpp too (scripted) * actually replace wallaper pages ==== ksshaskpass5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: ksshaskpass5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Add pre-commit hook for clang-format * Add .gitignore file * Add .git-blame-ignore-revs file * Run clang-format ==== ksysguard5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: ksysguard5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Fix sensors names of aggregate disk rates (kde#432851) * Fix copy paste error resulting in total upload displaying the upload rate (kde#430676) * Fix disk speeds (kde#432637) * Check if we could open a file * Include StorageVolumes by default * Set name for temperature sensor * cmake: add URL to help packagers - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here ==== kwayland-integration ==== Version update (5.20.5 -> 5.21.0) - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Now it depends against new version. Old code can be removed * Remove not implemented method * Fix shadowless context menus * Switch to SPDX license identifiers ==== kwayland-server ==== Version update (5.20.5 -> 5.21.0) - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Prevent setting invalid buffer transform and scale * Initialise variable * Introduce SurfaceInterface::hasFrameCallbacks() * Print warning messages in KWAYLAND_SERVER logging category - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here ==== kwin5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: kwin5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Too many changes to list here - Most parts of 0001-Use-Xauthority-for-Xwayland.patch are now upstream, replace it with just 0001-Export-consistent-hostname-as-XAUTHLOCALHOSTNAME.patch - Enable accessibility integration ==== kwrited5 ==== Version update (5.20.5 -> 5.21.0) - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - No code changes since 5.20.5 ==== libapparmor ==== Subpackages: libapparmor1 libapparmor1-32bit - merge libapparmor.changes into apparmor.changes - define %_pamdir for <= 15.x to fix the build on those releases - add apache-extra-profile-include-if-exists.diff: make <apache2.d> include in apache extra profile optional to avoid problems with empty profile directory (boo#1178527) - prepare usrmerge (boo#1029961) * use %_pamdir ==== libkdecoration2 ==== Version update (5.20.5 -> 5.21.0) Subpackages: libkdecorations2-5 libkdecorations2-5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Use non-deprecated KDE_INSTALL_CMAKEPACKAGEDIR * Add .gitignore file to ignore generated .clang-format * bump .so number of kdecorations2private * Restore ABI of libkdecorations2.so * Add a QRect to requestShowWindowMenu * If include is define in .h remove it if it's defined in .cpp too (scripted) ==== libkscreen2 ==== Version update (5.20.5 -> 5.21.0) Subpackages: libKF5Screen7 libkscreen2-plugin - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Fix refresh rate reported for my laptop monitor * wayland: Fix mapping between kscreen and kwayland transforms - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Update .gitignore file * Add .git-blame-ignore-revs file * clang-tidy: Force braces around statements * Run clang-format * Add missing protect header * Fix build with newer Qt * doctor: Add an option to allow excluding outputs from a dpms action * Fix build with newer Qt * ConfigMonitor: Properly combine erase and iteration * Proper variable scope * KScreen::Output debug output readability * Config: Reserve hash size before populating it * edid: Do not split strings twice unnecessarily * edid: Do not access unallocated QByteArrays * wayland: Provide the Edid when we have it * Prefer straightforward API * wayland: remove meaningless comment * doctor: do not crash when accessing dpms * Initialise the WaylandOutput::size * Use non-deprecated scale method to calculate the screen geometry * Remove unused method declaration * Include rotation in the debug output * Remove not implemented method * Use new simpler way to disable session management ==== libksysguard5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: libksysguard5-helper libksysguard5-imports libksysguard5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Ensure text doesn't flow outside the Pie Chart face (kde#431995) * Respect "show title" flag for Faces' CompactRepresentation * Reduce default history amount for line charts to 60 seconds * Do the sensor setters in two stages (kde#432254) * Always reset minimum and maximum, not only when inserting * Use faster file system searcing for iterating process groups * Also require C++ 17 on stable * SensorDataModel: Cache minimum and maximum values * Fix dataChanged emitted when PIDs are loaded * Avoid formatting NaN values * Don't call update inside the application constructor * Filter our services in the application slice which don't match the app string specifier * Prevent inadvertently writing config when destroying SensorFaceController (kde#428970) - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here ==== liblastfm-qt5 ==== - Add patch to fix build with GCC 11 (boo#1181870): * 0001-Stick-to-c-14-for-liblastfm.patch ==== libqca-qt5 ==== Version update (2.3.1 -> 2.3.2) Subpackages: libqca-qt5-plugins - Add a keyring file - Use cmake() syntax for Qt build requirements - Update to 2.3.2: * Add macOS framework major version * qca-gcrypt: Add support for HKDF * Minimum Qt updated to 5.9 * Fixed compilation with gcc 11 - Rebase qca-2.3.0-fixDSA.patch ==== libqt5-qtwebengine ==== - Add patch to fix sandbox with glibc 2.33 (boo#1182233): * chromium-glibc-2.33.patch ==== libquvi-scripts ==== - Use boolean dependencies to require the correct lua<n>-luasocket, depending on the system in use (lua53-luasocket if liblua5_3-5, lua54-luasocket if liblua5-4-5). ==== libressl ==== Version update (3.2.3 -> 3.2.4) Subpackages: libcrypto46 libssl48 libtls20 - Update to release 3.2.4 * Switch back to certificate verification code from LibreSSL 3.1.x. The new verifier is not bug compatible with the old verifier causing issues with applications expecting behavior of the old verifier. * Unbreak DTLS retransmissions for flights that include a CCS. * Implement autochain for the TLSv1.3 server. * Use the legacy verifier for autochain. * Implement exporter for TLSv1.3. * Plug leak in x509_verify_chain_dup(). ==== meld ==== Version update (3.20.2 -> 3.20.3) Subpackages: meld-lang - Update to version 3.20.3: + Fix folder comparison sensitivity breaking when cancelling a scan. + Fix Subversion comparsion on Python 3.9. + Retain clipboard contents after exiting Meld. + Fix wrapping in notification bars. + Fix border width in our file selection dialog. + Fix occasional traceback when closing comparisons. + Update links to reflect move to Discourse. + Updated translations. ==== milou5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: milou5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 ==== mozc ==== Version update (2.25.4150.102 -> 2.26.4276.102) Subpackages: fcitx-mozc ibus-mozc ibus-mozc-candidate-window mozc-gui-tools - Upstream update to 2.26.4276.102 * Fix problem with conversion including a number * Introduce a new configuration file ibus_config.textproto so that users can change IBus keyboard layout without root - Update README.SUSE - Update post code dictionary - Update abseil-cpp to 20200923.3 - Refresh build-with-libstdc++.patch - Refresh ibus-provide-layout-variations.patch - Remove fcitx-mozc-2.23.2815.102.1.patch * Replaced with fcitx-mozc.tar.xz - Remove fcitx-fix-for-a1dcadab.patch * Merged by upstream ==== oxygen5 ==== Version update (5.20.5 -> 5.21.0) - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Port QRegExp to QRegularExpression * operator+/- is disabled for QFlags in qt6 * If include is define in .h remove it if it's defined in .cpp too (scripted) * [cursors] Add symlinks for corner resize ==== pango ==== Version update (1.48.1 -> 1.48.2) Subpackages: libpango-1_0-0 libpango-1_0-0-32bit typelib-1_0-Pango-1_0 - Update to version 1.48.2: + Fix memory leaks reported by asan + Avoid overflow in pango_attr_list_update + Add a valgrind suppression file + Make tests more robust + Fix pango_font_describe for Emoji fonts ==== perl-Bootloader ==== Version update (0.932 -> 0.933) - merge gh#openSUSE/perl-bootloader#133 - use shim on aarch64 (jsc#SLE-15823, jsc#SLE-15020) - 0.933 ==== perl-Mojolicious ==== Version update (8.72 -> 8.73) - updated to 8.73 see /usr/share/doc/packages/perl-Mojolicious/Changes 8.73 2021-02-05 - Removed finally keyword from check function in Mojo::Exception. - Changed arguments of check function in Mojo::Exception to be easier to use with Perl 5.34 try/catch. - Removed experimental status from preload_namespaces attribute in Mojolicious. - Removed experimental status from any, map, timer and timeout methods in Mojo::Promise. - Removed experimental status from extname method in Mojo::File. - Removed experimental status from warmup method in Mojolicious. - Removed experimental status from load_classes function in Mojo::Loader. - Removed experimental status from Mojo::DynamicMethods. Still summons old gods, use at your own risk! - Removed experimental status from before_command hook in Mojolicious. - Added silent attribute to Mojo::Server::Morbo. ==== plasma-browser-integration ==== Version update (5.20.5 -> 5.21.0) Subpackages: plasma-browser-integration-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Parent TasksModel to QGuiApplication and delete TasksModel after we've set the environment - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Bump manifest version * [Download Job] Show referrer instead of data URL * Open KRunner KCM in System Settings * Add .gitignore to ignore generated .clang-format * Apply autoplay prevention evasion also for Video tags * [Options Page] Provide feedback when permission was already granted * Add Microsoft Edge environment * Port from Settings::environmentDescription().icon to qApp->windowIcon().name() * Use libTaskManager for identifying the browser * [Tabs Runner] Slightly better scoring * Install messaging host for Edge * [Options Page] Force http(s) links to open in new tab * [Reminder] Add Microsoft Edge store link * [convertpottojson] Handle lines ending with " * Add Microsoft Edge extension ID * Move conversion of data URL into QImage into base class * Tabs Runner: Use KApplicationTrader::isSubsequence * Port TabsRunner to DBus runner * Add browser history runner * Introduce AbstractKRunnerPlugin for wrapping DBusRunner * [Settings] Add browser icon name * [Tabs Runner] Rework handling of favicons * If include is define in .h remove it if it's defined in .cpp too (scripted) ==== plasma-nm5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: plasma-nm5-lang plasma-nm5-openconnect plasma-nm5-openvpn plasma-nm5-pptp plasma-nm5-vpnc - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * [applet] Make spacing for header items consistent - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here - Drop patches, now upstream: * 0001-Add-support-for-the-OpenVPN-parameter-compress.patch ==== plasma5-addons ==== Version update (5.20.5 -> 5.21.0) Subpackages: plasma5-addons-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Copy result by default - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here ==== plasma5-desktop ==== Version update (5.20.5 -> 5.21.0) Subpackages: plasma5-desktop-emojier plasma5-desktop-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * kcms/keyboard: migrate to repeat, not to accent * Correctly construct URL from local file * fix: Inconsistent effect when hover over the new Keyboard Layout applet (kde#432091) * fix: Wrong fontsize on Keyboard Layout applet (kde#431889) * Fix crash when deleting activity from activity manager (kde#426926,kde#427593) * fix: the first keyboard layout can't have variants (kde#432367) * Use ThickMargin to redirect mouse input to panel and update spacingAtMinSize value * Make the timeout for the applet actions dialog much shorter * migrate from desktops *and* panels (kde#432148) * migrate from MidButton to MiddleButton (kde#430418) * [Kickoff] Open leave menu on press * Fix drag directions for top and right panels (kde#429063) * [Kickoff] Turn off hovering to switch tabs by default * Fix display string for middle click containment action * fix: keyboard applet doesn't autoload on Wayland * [Kickoff] Reduce spacing between label and arrow alleviating elision problem * [Kickoff] Tweak padding around configure button * [Kickoff] Use RoundButton for now Right now Avatar isn't mature enough for keyboard navigation so it's best to work around touch issue for now * [applets/kickoff] Add a visible configure button * [applets/kickoff] Re-add Avatar to the focus chain * hotfix: re-add id to avatar in Kickoff * kickoff: use Kirigami.Avatar directly instead of wrapping in RoundButton * [Kickoff] Fix leave buttons not working * [Kickoff] Revamp LeaveButtons item * [Kickoff] Check for searchPage directly rather than root.state (kde#431894) * [Folder View] implement "two click rename" feature for double-click mode (kde#392731) * Enable 2 columns mode - Avoid hard dependency on plasma5-pa ==== plasma5-disks ==== Version update (5.20.5 -> 5.21.0) Subpackages: plasma5-disks-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Update .gitignore file * Add pre-commit hook for clang-format * Add .git-blame-ignore-revs file * Run clang-format * Add clang-format target * add test blob for internal smartctl timeout * use std::chrono for durations * bump smartctl timeout in helper (kde#428844) * add json fixture for bad smart status on failing disk * actually erase devices (kde#428746) * Remove unused implemented method * fix device type check for freebsd * replace open-fstat dance with lstat * fix device type check for freebsd * replace open-fstat dance with lstat * make O_PATH optional-ish * add missing include for freebsd * pass device names to the helper * make O_PATH optional-ish * add missing include for freebsd * pass device names to the helper * add request queuing to kauth smartctl ==== plasma5-integration ==== Version update (5.20.5 -> 5.21.0) Subpackages: plasma5-integration-plugin plasma5-integration-plugin-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Revert held-key behaviour - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * x11integration: Force standalone Qt::Dialog resizable * Change default color scheme to BreezeLight * operator+/- is disabled for QFlags in qt6 * Add comment explaining the pkg-config file installed by IM module * [keyheld]: add tittleless i and s-cedilla * Add Philippine Peso to currency alternatives in plasma im module * Add some currency mappings to new key-held im module module * Add key-held behaviour * Use new standard shortcut for "Create Folder" * Enable hover effects by default * Use nullptr * Ignore files * Use Q_EMIT * initialize pointer/values * Fix typo + use direct * Now it depends against new version. Old code can be removed * kdirselectdialog: when creating a new dir that already exists, select it * QXdgDesktopPortalFileDialog: pass directory option to portal ==== plasma5-openSUSE ==== Subpackages: plasma5-defaults-openSUSE plasma5-theme-openSUSE plasma5-workspace-branding-openSUSE sddm-theme-openSUSE - Update to 5.21.0 - Update to 5.20.90 ==== plasma5-pa ==== Version update (5.20.5 -> 5.21.0) Subpackages: plasma5-pa-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * Allow to mute/unmute microphone with left-click in system tray * [StreamRestore] Fix equals check * Forward role() into PulseObjectFilterModel - Adjust dependencies to allow pipewire-pulseaudio as well - Use GSettings on Leap 15.3+ as well - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here ==== plasma5-thunderbolt ==== Version update (5.20.5 -> 5.21.0) Subpackages: plasma5-thunderbolt-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Update .gitignore file * Add pre-commit hook for clang-format * Add .git-blame-ignore-revs file * Run clang-format * Port another placeholder message to use Kirigami.PlaceholderMessage * Do not explicitely define Exec line for KCM ==== plasma5-workspace ==== Version update (5.20.5 -> 5.21.0) Subpackages: gmenudbusmenuproxy plasma5-session plasma5-session-wayland plasma5-workspace-lang plasma5-workspace-libs xembedsniproxy - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * fix restore size when float is used * show colors,icons and plasma style in plamo * [Notifications] Escape HTML in destUrl and fileName * [Notifications] When application responds to cancel request, stop kill timer * Fix condition for executable folders (kde#432653) * ksmserver: Filter out services with NoDisplay=true * Fix wallpaper paths in org.kde.slideshow package * Revert "Use subseq matching for service runner" (kde#431609,kde#432339) * [Notifications] Property is supposed to be "ProcessedItems" * remove phone specific wallpaper config ui * [applets/digital clock] Unbreak the time zone config dialog * Set add panel as an explicit menu of a panel action (kde#432250) * Wallpaper config: fix property imageModel that was missing in delegate (kde#431961) * Make ksmserver's lock screen detection automatic * [systemd] Move kwin to "wants" * [applets/systemmonitor] fix not hiding the title on vertical panels * [applets/digital clock] Restore scroll-to-change-displayed-timezone (kde#431977) * Don't crash if the panelview is not ready * [Notifications] Re-evaluate unread count when a notification is "read" * [keyboard applet] fix TypeError garbage in log * Fix condition for windowed widgets standalone mode (kde#432032) - Add patch to either get more info or work around logout not working sometimes (kde#432460): * 0001-ksmserver-Enable-debug-output-by-default.patch - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here - Refresh patches: * 0001-Revert-No-icons-on-the-desktop-by-default.patch * 0001-Set-GTK_BACKEND-x11-in-a-wayland-session.patch * 0001-Use-qdbus-qt5.patch ==== polkit-kde-agent-5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: polkit-kde-agent-5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * plasma-polkit-agent.service: fix After, BusName keys (kde#431963) - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Add pre-commit hook for clang-format * Update .gitignore file * Add .git-blame-ignore-revs file * Run clang-format * If include is define in .h remove it if it's defined in .cpp too (scripted) * Makes the polkit agent started by systemd when systemd boot is enabled. ==== poppler ==== Version update (21.01.0 -> 21.02.0) Subpackages: libpoppler-cpp0 libpoppler-glib8 poppler-tools - Update to 21.02.0: + core: - GfxCal*ColorSpace: introduce Bradford transform for chromatic adaptation - Fix memory leak if saving the file fails - Internal code improvements - Fix various issues handling broken files - Make checkedAdd work for long long in MSVC + qt5: - Properly export NewSignatureData class - Fix regression in QIODeviceOutStream + MSVC + qt6: - Properly export NewSignatureData class - Fix regression in QIODeviceOutStream + MSVC + utils: - pdftohtml: Fix error() parameter type ==== poppler-qt5 ==== Version update (21.01.0 -> 21.02.0) - Update to 21.02.0: + core: - GfxCal*ColorSpace: introduce Bradford transform for chromatic adaptation - Fix memory leak if saving the file fails - Internal code improvements - Fix various issues handling broken files - Make checkedAdd work for long long in MSVC + qt5: - Properly export NewSignatureData class - Fix regression in QIODeviceOutStream + MSVC + qt6: - Properly export NewSignatureData class - Fix regression in QIODeviceOutStream + MSVC + utils: - pdftohtml: Fix error() parameter type ==== powerdevil5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: powerdevil5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * [backlighthelper] Don't touch brightness when animation isn't running - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Autogenerate categories file * Clarify ambiguous settings entries in launchers * Clear ambiguity when searching for settings in launchers * Take into account logind sleep and idle inhibitions (kde#364067) * mobile: bind the power off key to "Turn Off Screen" * Expose screen locked state in policy agent * autostart: start powerdevil earlier in the phase 0 * Set NoDisplay=true in powerdevil autoatart * Remove use of XCB DPMS timeouts and handle it explicitly * If include is define in .h remove it if it's defined in .cpp too (scripted) * Do not explicitely define Exec lines for KCMs * Add gitignore file * Ignore player's from KDE Connect when suspending (kde#427209) * Remove XRandRBrightness * Honor animation brightness threshold also for sysfs helper (kde#426883) * Add systemd unit for powerdevil * Set correct type for autostart .desktop file * Show "you might need to reconnect charger" hint only when charging/fully charged * Take DESTDIR into account when running setcap ==== publicsuffix ==== Version update (20210128 -> 20210211) - Update to version 20210211: * Add mcpre.ru, mcdir.me to mchost.ru subsection (#1206) * Add awsglobalaccelerator.com (#1199) * Add northflank.app and code.run to PSL (#1198) * gTLD autopull: 2021-02-07 (#1203) ==== python-flufl.lock ==== Version update (3.2 -> 5.0.4) - The package Requires python-typing_extensions - Add missing python-typing_extensions BuildRequires for tests - Update to version 5.0.4 * https://gitlab.com/warsaw/flufl.lock/-/blob/5.0.4/docs/NEWS.rst - Removed LICENSE (part of the tarball now) - Added python-flufl.lock-fix-setup.patch ==== python-requests ==== - add 5711.patch from upstream instead to remove idna<3 pin ==== python-tornado6 ==== - back to version 6.1. Tornado pin in distributed is removed. - Dear bot, here are the patch names: * re-drop python-tornado6-httpclient-test.patch * re-drop skip-failing-tests.patch * re-drop tornado-testsuite_timeout.patch * refreshed ignore-resourcewarning-doctests.patch - Revert back to 6.0.4 for incompatibility with python-distributed. - Adds back patches: * python-tornado6-httpclient-test.patch * skip-failing-tests.patch * tornado-testsuite_timeout.patch ==== python38 ==== Subpackages: python38-curses python38-dbm python38-tk - Add Obsoletes for python3-base when primary interpreter is set to properly replace it during upgrades. (bsc#1181324) - Provide %have_<flavor> for all python flavors gh#openSUSE/python-rpm-macros#96 - Add %python3_default and %default_python3 for the primary python3 flavor ==== python38-core ==== Subpackages: libpython3_8-1_0 python38-base - Add Obsoletes for python3-base when primary interpreter is set to properly replace it during upgrades. (bsc#1181324) - Provide %have_<flavor> for all python flavors gh#openSUSE/python-rpm-macros#96 - Add %python3_default and %default_python3 for the primary python3 flavor ==== python38-documentation ==== - Add Obsoletes for python3-base when primary interpreter is set to properly replace it during upgrades. (bsc#1181324) - Provide %have_<flavor> for all python flavors gh#openSUSE/python-rpm-macros#96 - Add %python3_default and %default_python3 for the primary python3 flavor ==== qemu ==== Subpackages: qemu-arm qemu-audio-spice qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-nfs qemu-block-rbd qemu-block-ssh qemu-chardev-baum qemu-chardev-spice qemu-guest-agent qemu-hw-display-qxl qemu-hw-display-virtio-gpu qemu-hw-display-virtio-gpu-pci qemu-hw-display-virtio-vga qemu-hw-usb-redirect qemu-hw-usb-smartcard qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-microvm qemu-ppc qemu-s390x qemu-seabios qemu-sgabios qemu-skiboot qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-opengl qemu-ui-spice-app qemu-ui-spice-core qemu-vgabios qemu-vhost-user-gpu qemu-x86 - Switch the modules qemu-ui-display-gpu and qemu-ui-display-gpu-pci from being an x86 only Recommends, to a Recommends for all arch's except s390x (boo#1181350) - Fix qemu-hw-usb-smartcard to not be a Recommends for s390x - Minor spec file tweaks for compatibility with upcoming spec file formatter - Make note that this patch takes care of an OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933) hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch - Include upstream patches designated as stable material and reviewed for applicability to include here block-Separate-blk_is_writable-and-blk_s.patch hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch hw-net-lan9118-Fix-RX-Status-FIFO-PEEK-v.patch hw-timer-slavio_timer-Allow-64-bit-acces.patch net-Fix-handling-of-id-in-netdev_add-and.patch target-arm-Don-t-decode-insns-in-the-XSc.patch target-arm-Fix-MTE0_ACTIVE.patch target-arm-Introduce-PREDDESC-field-defi.patch target-arm-Update-PFIRST-PNEXT-for-pred_.patch target-arm-Update-REV-PUNPK-for-pred_des.patch target-arm-Update-ZIP-UZP-TRN-for-pred_d.patch tcg-Use-memset-for-large-vector-byte-rep.patch ui-vnc-Add-missing-lock-for-send_color_m.patch virtio-move-use-disabled-flag-property-t.patch - binutils v2.36 has changed the handling of the assembler's - mx86-used-note, resulting in a build failure. To compensate, we now explicitly specify -mx86-used-note=no in the seabios Makefile (boo#1181775) build-be-explicit-about-mx86-used-note-n.patch ==== rpm ==== Subpackages: librpmbuild9 - Use shipped config.sub/config.guess instead of stone-aged from libtool - auto-config-update-aarch64-ppc64le.diff: update grep regex ==== sendmail ==== Subpackages: libmilter1_0 - Fix up build dependencies. The construct: %%if %%{undefined systemd_requires}\n%%global with_sysvinit 1 does not work as intended. The OBS scheduler for example does not have all the macros coming from 'random' rpmmacro files/packages (systemd-rpm-macros in this case) present, as such for OBS, systemd_requires is undefined, which in turn pulls in insserv_prereq. The build itself then does not use it though, as at this time, the correct macros are known (inside the build VM). - As we're at it: replace systemd_requires with systemd_ordering: people installing sendmail into a container do not require systemd as a dependency there. But for people installing sendmail in a transaction together with systemd, we prefer systemd to be installed first. ==== systemsettings5 ==== Version update (5.20.5 -> 5.21.0) Subpackages: systemsettings5-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - Changes since 5.20.90: * [Sidebar view] Make Intro Page icons keyboard-triggerable * Include SystemSettingsExternalApp modules in the --list output as well * Fix headers missing for non-KCM modules * [Icon View] Don't open modules twice on clicking * Fix ExternalAppModules not showing up * [sidebar view] Fix sidebar header alignment and height - Drop patches, now upstream: * 0001-Fix-ExternalAppModules-not-showing-up.patch * 0002-Icon-View-Don-t-open-modules-twice-on-clicking.patch * 0003-Fix-headers-missing-for-non-KCM-modules.patch * 0004-Include-SystemSettingsExternalApp-modules-in-the-lis.patch - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Too many changes to list here - Add patches to fix the YaST item: * 0001-Fix-ExternalAppModules-not-showing-up.patch * 0002-Icon-View-Don-t-open-modules-twice-on-clicking.patch * 0003-Fix-headers-missing-for-non-KCM-modules.patch * 0004-Include-SystemSettingsExternalApp-modules-in-the-lis.patch ==== thunar ==== Version update (4.16.2 -> 4.16.3) Subpackages: libthunarx-3-0 thunar-lang - Update to version 4.16.3 * By default show all available volumes * Regression: Skip app info updates on sendto actions (bxo#xfce/thunar#502) * Regression: Toggle menu visibility on F10 if menu hidden (bxo#xfce/thunar#498) * Regression: "Shift" + "Select Trash in menu" has to trigger delete * Dont select previous file after delete/trash (bxo#xfce/thunar#477) * Increase min. size of "text" field in bulk renamer (bxo#xfce/thunar#474) * Translation Updates ==== unbound ==== Version update (1.13.0 -> 1.13.1) Subpackages: libunbound8 unbound-anchor - update to 1.13.1 Features - Merge PR #375 by fhriley: Add rpz_enable and rpz_disable commands to unbound-control. - Merge PR #391 from fhriley: Add start_time to reply callbacks so modules can compute the response time. - Fix #397: [Feature request] add new type always_null to local-zone similar to always_nxdomain. - Support for RFC5001: DNS Name Server Identifier (NSID) Option with the nsid: option in unbound.conf - Padding of queries and responses with DNS over TLS as specified in RFC7830 and RFC8467. - Merge PR #275 from Roland van Rijswijk-Deij: Add feature to return the original instead of a decrementing TTL ('serve-original-ttl') Bug Fixes - Fix #358: Squelch udp connect 'no route to host' errors on low verbosity. - Fix #360: for the additionally reported TCP Fast Open makes TCP connections fail, in that case we print a hint that this is happening with the error in the logs. - Fix #356: deadlock when listening tcp. - Fix unbound-dnstap-socket to not use log routine from interrupt handler and not print so frequently when invoked in sequence. - Fix on windows to ignore connection failure on UDP, unless verbose. - make depend. - Fix #371: unbound-control timeout when Unbound is not running. - Fix to squelch permission denied and other errors from remote host, they are logged at higher verbosity but not on low verbosity. - Merge PR #335 from fobser: Sprinkle in some static to prevent missing prototype warnings. - Merge PR #373 from fobser: Warning: arithmetic on a pointer to void is a GNU extension. - Fix missing prototypes in the code. - Fix error cases when udp-connect is set and send() returns an error (modified patch from Xin Li @delphij). - For #376: Fix that comm point event is not double removed or double added to event map. - iana portlist updated. - Fix #385: autoconf 2.70 impacts unbound build - Fix #379: zone loading over HTTP appears to have buffer issues. - Merge PR #395 from mptre: add missing null check. - Fix #387: client-subnet-always-forward seems to effectively bypass any caching? - For #391: use struct timeval* start_time for callback information. - For #391: fix indentation. - For #391: more double casts in python start time calculation. - Add comment documentation. - Fix clang analysis warning. - Fix so local zone types always_nodata and always_deny can be used from the config file. - Merge #399 from xiangbao227: The lock of lruhash table should unlocked after markdel entry. - Fix for #93: dynlibmodule link fix for Windows. - Fix for #93: dynlibmodule import library is named libunbound.dll.a. - Merge #402 from fobser: Implement IPv4-Embedded addresses according to RFC6052. - Fix #404: DNS query with small edns bufsize fail. - Fix declaration before statement and signed comparison warning in dns64. - Fix TTL of SOA record for negative answers (localzone and authzone data) to be the minimum of the SOA TTL and the SOA.MINIMUM. - Fix compile of unbound-dnstap-socket without dnstap installed. - Merge PR #355 from noloader: Make ICANN Update CA and DS Trust Anchor static data. - Ignore cache blacklisting when trying to reply with expired data from cache (#394). - Merge PR #408 from fobser: Prevent a few more yacc clashes. - Annotate that we ignore the return value of if_indextoname. - Fix to use correct type for label count in rpz routine. - Fix empty clause warning in config_file nsid parse. - Fix to use correct type for label count in ipdnametoaddr rpz routine. - Fix empty clause warning in edns pass for padding. - Fix for doxygen 1.8.20 compatibility. - Attempt to fix NULL keys in the reuse_tcp tree; relates to #411. - Fix dynlibmod link on rhel8 for -ldl inclusion. - Fix windows dependency on libssp.dll because of default stack protector in mingw. - Fix indentation of root anchor for use by windows install script. ==== xdg-desktop-portal-kde ==== Version update (5.20.5 -> 5.21.0) Subpackages: xdg-desktop-portal-kde-lang - Update to 5.21.0 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma/5/5.21.0 - No code changes since 5.20.90 - Update to 5.20.90 * New feature release * For more details please see: * https://kde.org/announcements/plasma/5/20.90/ - Changes since 5.20.5: * Add X-KDE-DBUS-Restricted-Interfaces=org.kde.kwin.Screenshot to desktop file * If include is define in .h remove it if it's defined in .cpp too (scripted) * FileChooser: escape slash character in user visible filter name (kde#427306) * mobile filechooser: Make sure to also return the right folder when the folder wasn't changed * Disable X11 session management * screencast: Improve the screencasting process * mobile filechooser: Use new required property API * mobile filechooser: Don't accept empty titles ==== xfce4-taskmanager ==== Version update (1.4.1 -> 1.4.2) Subpackages: xfce4-taskmanager-lang - Update to version 1.4.2 * Ellipsize memory and swap labels (gxo#apps/xfce4-taskmanager#32) ==== xtables-addons ==== Version update (3.12_k5.10.14_1 -> 3.15_k5.10.16_1) - Update to release 3.15 * xt_lscan: add --mirai option * Support for Linux 5.11 * xt_geoip_fetch was renamed to xt_geoip_query to better reflect its purpose ==== xterm ==== Version update (363 -> 366) Subpackages: xterm-bin - Updated to Patch#366 2021/02/10 * correct a compiler-warning fix in patch #352 which allowed sign-extension of coordinate values (report by "CismonX"). * correct upper-limit for selection buffer, accounting for combining characters (report/testcase by Tavis Ormandy). (CVE-2021-27135 bsc#1182091) * with alwaysHighlight true, xterm does not properly track focus. The screen->select FOCUS flag remains always on, which prevents bellIsUrgent from working, as the urgent WM_HINT flag is only set in setXUrgency() when the window is not focused. Fix this by updating screen->select in unselectwindow() regardless of the value of always_highlight (patch by Jiri Bohac). * improve fix for interaction between SRM and ENQ (report by Grant Taylor). * build-fix for --with-Xaw3dxft, needed when --with-toolbar is omitted (report by Jimmy Olgeni, Emanuel Haupt). - Updated to Patch #365 - 2021/02/03 * amend fix for ?word? selection in patch #364 to limit that to the insert-selectable action, which reads data from the screen. This restores the interactive behavior where double-clicking on a ?word? would make subsequent selection extensions by words as well as suppressing some boundary-checks (report by David Wolfskill, FreeBSD #253225). - Updated to Patch #364 - 2021/02/02 * add -fc option. * correct/improve limit-checks for SRM versus ENQ from patch #344 (report by Tom Szilagyi). * enable XftFont resource in Xaw3dxft configuration (patch by Tavis Ormandy). * improve quoting/escaping in build-scripts per shellcheck. * add libpcre2-posix to the packages tested for --with-pcre2 option, needed with Fedora (report by Tomas Korbar). * correct a typo in manual page, and note that KeepClipboard may not be compiled-in (report/patch by Sean C Farley). * corrected boundary-checks for ?word? selection used in onNClicks resources (report by Tavis Ormandy). * update to autoconf-2.52-20210101, to improve shellcheck warnings. * improve configure check for desktop categories.

1 0

Over 2500 packages updated and no announcements?
by Marco Calistri 17 Feb '21

17 Feb '21

Hello, I ran zypper ref && zypper dup and I'm still receiving over 2500 new packages. I've not seen the traditional "New Tumbleweed snapshot..." announcement for this heavy update. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210210 Kernel:5.10.12-1-default Desktop: XFCE (4.16.0)

11 14

Apache httpd configuration @ SUSE
by pgajdos 17 Feb '21

17 Feb '21

Hi, I got indicies that some people do not like SUSE httpd configuration mechanism, for example wrt diverging from other distros. What do you think? Your opinion is valuable. To recap, there are two levels: higher one represented by systemd service apache2 (and apache2@ for instances), as known as start_apache2, which takes sysconfig variables -- eventually set by yast httpd module -- into account. Lower level is represented by running just httpd, which is not influenced by sysconfig variables. This separation was driven by illogical behaviour when mixing these two approaches together. Both positive and negative feedback is welcome before we consider what we can do better. Petr -- Have a lot of fun!

9 11