December 2020 - openSUSE Factory - openSUSE Mailing Lists

System freeze with kernel 5.9.x series
by Frans de Boer 14 Dec '20

14 Dec '20

LS, There was a discussion before about intermittent screen freezes using TW and the 5.9.x kernel. Some blamed the Intel graphics, while I had experienced this same effect with AMD, NVIDEA and Intel and have reported that also in mentioned thread. I have not seen any message that the problem has been tracked and is/will be corrected. Today, I did an update to 5.9.12, started a rsync session (within the standard Plasma KDE environment) to download a whole nongnu repository and stopped all programs using the displays. I did this because I had noticed and reported that too, that the freeze problem occurs mainly when the network is rather busy and I stressed the display usage. I wanted to see if the network alone could freeze the system. The result, it was a DEEP FREEZE!!. Only a system reset would bring the system back to life. It is unclear how long it took to get a system wide freeze, - was not there to watch due to some late minute shopping - but it must have been anywhere between one to two hours before this occurred. There is no such issue with the 5.8.15 kernel detected. So - again - don't look at the visible effect, but rather look at the network portion within 5.9.x. Anyhow, this issue has plagued the OpenSuse kernel 5.9.x series long enough. I hope this issue is resolved when moving forward to the 5.10 kernel series. Regards, Frans. -- A: Yes, just like that A: Ja, net zo Q: Oh, Just like reading a book backwards Q: Oh, net als een boek achterstevoren lezen A: Because it upsets the natural flow of a story A: Omdat het de natuurlijke gang uit het verhaal haalt Q: Why is top-posting annoying? Q: Waarom is Top-posting zo irritant?

2 1

New Tumbleweed snapshot 20201213 released!
by Dominique Leuenberger 14 Dec '20

14 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: gstreamer-devtools (1.18.1 -> 1.18.2) gstreamer-editing-services (1.18.1 -> 1.18.2) kdevelop5 (5.6.0 -> 5.6.1) kernel-source (5.9.12 -> 5.9.14) patterns-yast (20191229 -> 20201210) python-gst (1.18.1 -> 1.18.2) xapps (1.6.10 -> 2.0.0) xreader (2.6.4 -> 2.8.0) === Details === ==== gstreamer-devtools ==== Version update (1.18.1 -> 1.18.2) Subpackages: libgstvalidate-1_0-0 typelib-1_0-GstValidate-1_0 - Update to version 1.18.2: + No changes. - Tweak _service file. ==== gstreamer-editing-services ==== Version update (1.18.1 -> 1.18.2) Subpackages: libges-1_0-0 typelib-1_0-GES-1_0 - Update to version 1.18.2: + Fix static build + ges_init(): Fix potential initialisation crash on error - Fix the _service file and spec to really use the tarball generated by service. ==== kdevelop5 ==== Version update (5.6.0 -> 5.6.1) Subpackages: kdevelop5-lang kdevplatform kdevplatform-lang libkdevplatform56 - Update to 5.6.1 * Fix support for gdb 10.x (kde#428688) * Fix an issue in the "Run test" feature with tests launched by the same executable (kde#377639) * Fix several crashes on exit while debugging (kde#425994, kde#425993, kde#425985) * The output view now highlights glibc assert messages by default * Less confusing behaviour of the "Stop" and "Stop all" toolbar buttons (it no longer has a delayed-dropdown) * Fix a set of oddities with initial parsing of project files * Fix a crash when closing KDevelop directly after opening a large project (kde#427387, kde#427386) * Fix a crash in some cases when launching an executable (kde#399511, kde#416874) * Improved support for changing the CMake_BUILD_TYPE in projects (kde#429605) * Fix a crash when the problem reporter plugin was turned off during runtime * Various other small bug fixes * Various smaller performance improvements ==== kernel-source ==== Version update (5.9.12 -> 5.9.14) Subpackages: kernel-default kernel-docs - drm/i915/gt: Declare gen9 has 64 mocs entries! (git-fixes). - commit c648a46 - Linux 5.9.14 (bsc#1012628). - usb: gadget: f_fs: Use local copy of descriptors for userspace copy (bsc#1012628). - USB: serial: kl5kusb105: fix memleak on open (bsc#1012628). - USB: serial: ch341: add new Product ID for CH341A (bsc#1012628). - USB: serial: ch341: sort device-id entries (bsc#1012628). - USB: serial: option: add Fibocom NL668 variants (bsc#1012628). - USB: serial: option: add support for Thales Cinterion EXS82 (bsc#1012628). - USB: serial: option: fix Quectel BG96 matching (bsc#1012628). - speakup: Reject setting the speakup line discipline outside of speakup (bsc#1012628). - ALSA: hda/realtek: Fix bass speaker DAC assignment on Asus Zephyrus G14 (bsc#1012628). - ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model (bsc#1012628). - ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294 (bsc#1012628). - ALSA: hda/realtek - Add new codec supported for ALC897 (bsc#1012628). - ALSA: hda/realtek - Fixed Dell AIO wrong sound tone (bsc#1012628). - ALSA: hda/generic: Add option to enforce preferred_dacs pairs (bsc#1012628). - ring-buffer: Update write stamp with the correct ts (bsc#1012628). - ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next() (bsc#1012628). - ring-buffer: Always check to put back before stamp when crossing pages (bsc#1012628). - ftrace: Fix updating FTRACE_FL_TRAMP (bsc#1012628). - ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency (bsc#1012628). - cifs: allow syscalls to be restarted in __smb_send_rqst() (bsc#1012628). - cifs: fix potential use-after-free in cifs_echo_request() (bsc#1012628). - cifs: refactor create_sd_buf() and and avoid corrupting the buffer (bsc#1012628). - cifs: add NULL check for ses->tcon_ipc (bsc#1012628). - gfs2: Upgrade shared glocks for atime updates (bsc#1012628). - gfs2: Fix deadlock between gfs2_{create_inode,inode_lookup} and delete_work_func (bsc#1012628). - s390/pci: fix CPU address in MSI for directed IRQ (bsc#1012628). - i2c: imx: Fix reset of I2SR_IAL flag (bsc#1012628). - i2c: imx: Check for I2SR_IAL after every byte (bsc#1012628). - i2c: imx: Don't generate STOP condition if arbitration has been lost (bsc#1012628). - tracing: Fix userstacktrace option for instances (bsc#1012628). - thunderbolt: Fix use-after-free in remove_unplugged_switch() (bsc#1012628). - drm/omap: sdi: fix bridge enable/disable (bsc#1012628). - drm/amdgpu/vcn3.0: stall DPG when WPTR/RPTR reset (bsc#1012628). - drm/amdgpu/vcn3.0: remove old DPG workaround (bsc#1012628). - drm/i915/gt: Retain default context state across shrinking (bsc#1012628). - drm/i915/gt: Limit frequency drop to RPe on parking (bsc#1012628). - drm/i915/gt: Program mocs:63 for cache eviction on gen9 (bsc#1012628). - KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity check (bsc#1012628). - scsi: mpt3sas: Fix ioctl timeout (bsc#1012628). - io_uring: fix recvmsg setup with compat buf-select (bsc#1012628). - dm writecache: advance the number of arguments when reporting max_age (bsc#1012628). - dm writecache: fix the maximum number of arguments (bsc#1012628). - powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE (bsc#1012628). - genirq/irqdomain: Add an irq_create_mapping_affinity() function (bsc#1012628). - powerpc/pseries: Pass MSI affinity to irq_create_mapping() (bsc#1012628). - dm: fix bug with RCU locking in dm_blk_report_zones (bsc#1012628). - dm: fix double RCU unlock in dm_dax_zero_page_range() error path (bsc#1012628). - dm: remove invalid sparse __acquires and __releases annotations (bsc#1012628). - x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes (bsc#1012628). - coredump: fix core_pattern parse error (bsc#1012628). - mm: list_lru: set shrinker map bit when child nr_items is not zero (bsc#1012628). - mm/swapfile: do not sleep with a spin lock held (bsc#1012628). - hugetlb_cgroup: fix offline of hugetlb cgroup with reservations (bsc#1012628). - Revert "amd/amdgpu: Disable VCN DPG mode for Picasso" (bsc#1012628). - iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs (bsc#1012628). - mm: memcg/slab: fix obj_cgroup_charge() return value handling (bsc#1012628). - lib/syscall: fix syscall registers retrieval on 32-bit platforms (bsc#1012628). - can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check (bsc#1012628). - gfs2: check for empty rgrp tree in gfs2_ri_update (bsc#1012628). - netfilter: ipset: prevent uninit-value in hash_ip6_add (bsc#1012628). - ASoC: wm_adsp: fix error return code in wm_adsp_load() (bsc#1012628). - gfs2: Fix deadlock dumping resource group glocks (bsc#1012628). - gfs2: Don't freeze the file system during unmount (bsc#1012628). - rtw88: debug: Fix uninitialized memory in debugfs code (bsc#1012628). - i2c: qcom: Fix IRQ error misassignement (bsc#1012628). - i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc() (bsc#1012628). - dm writecache: remove BUG() and fail gracefully instead (bsc#1012628). - Input: i8042 - fix error return code in i8042_setup_aux() (bsc#1012628). - netfilter: nf_tables: avoid false-postive lockdep splat (bsc#1012628). - netfilter: nftables_offload: set address type in control dissector (bsc#1012628). - netfilter: nftables_offload: build mask based from the matching bytes (bsc#1012628). - x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes (bsc#1012628). - Revert "geneve: pull IP header before ECN decapsulation" (bsc#1012628). - bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds (bsc#1012628). - commit 960bcea - Update patches.suse/tty-Fix-pgrp-locking-in-tiocspgrp.patch (bsc#1179745 CVE-2020-29661). - Update patches.suse/tty-Fix-session-locking.patch (bsc#1179745 CVE-2020-29660). Add CVE numbers. - commit 1329f77 - Update config files to disable CONFIG_DEBUG_SECTION_MISMATCH (bsc#1177403) - commit a0a476d - Linux 5.9.13 (bsc#1012628). - devlink: Hold rtnl lock while reading netdev attributes (bsc#1012628). - devlink: Make sure devlink instance and port are in same net namespace (bsc#1012628). - ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init (bsc#1012628). - net/af_iucv: set correct sk_protocol for child sockets (bsc#1012628). - net: openvswitch: fix TTL decrement action netlink message format (bsc#1012628). - net/tls: missing received data after fast remote close (bsc#1012628). - net/tls: Protect from calling tls_dev_del for TLS RX twice (bsc#1012628). - rose: Fix Null pointer dereference in rose_send_frame() (bsc#1012628). - sock: set sk_err to ee_errno on dequeue from errq (bsc#1012628). - tcp: Set INET_ECN_xmit configuration in tcp_reinit_congestion_control (bsc#1012628). - tun: honor IOCB_NOWAIT flag (bsc#1012628). - usbnet: ipheth: fix connectivity with iOS 14 (bsc#1012628). - vsock/virtio: discard packets only when socket is really closed (bsc#1012628). - mptcp: fix NULL ptr dereference on bad MPJ (bsc#1012628). - net/packet: fix packet receive on L3 devices without visible hard header (bsc#1012628). - netfilter: bridge: reset skb->pkt_type after NF_INET_POST_ROUTING traversal (bsc#1012628). - ipv4: Fix tos mask in inet_rtm_getroute() (bsc#1012628). - dt-bindings: net: correct interrupt flags in examples (bsc#1012628). - chelsio/chtls: fix panic during unload reload chtls (bsc#1012628). - ibmvnic: Ensure that SCRQ entry reads are correctly ordered (bsc#1012628). - ibmvnic: Fix TX completion error handling (bsc#1012628). - tipc: fix incompatible mtu of transmission (bsc#1012628). - inet_ecn: Fix endianness of checksum update when setting ECT(1) (bsc#1012628). - geneve: pull IP header before ECN decapsulation (bsc#1012628). - net: ip6_gre: set dev->hard_header_len when using header_ops (bsc#1012628). - dpaa_eth: copy timestamp fields to new skb in A-050385 workaround (bsc#1012628). - cxgb3: fix error return code in t3_sge_alloc_qset() (bsc#1012628). - net: pasemi: fix error return code in pasemi_mac_open() (bsc#1012628). - vxlan: fix error return code in __vxlan_dev_create() (bsc#1012628). - chelsio/chtls: fix a double free in chtls_setkey() (bsc#1012628). - net: mvpp2: Fix error return code in mvpp2_open() (bsc#1012628). - net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl (bsc#1012628). - net: openvswitch: ensure LSE is pullable before reading it (bsc#1012628). - net/sched: act_mpls: ensure LSE is pullable before reading it (bsc#1012628). - net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering (bsc#1012628). - net/mlx5: Fix wrong address reclaim when command interface is down (bsc#1012628). - net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled (bsc#1012628). - ALSA: usb-audio: US16x08: fix value count for level meters (bsc#1012628). - Input: xpad - support Ardwiino Controllers (bsc#1012628). - Input: i8042 - add ByteSpeed touchpad to noloop table (bsc#1012628). - Input: atmel_mxt_ts - fix lost interrupts (bsc#1012628). - tracing: Fix alignment of static buffer (bsc#1012628). - tracing: Remove WARN_ON in start_thread() (bsc#1012628). - uapi: fix statx attribute value overlap for DAX & MOUNT_ROOT (bsc#1012628). - drm/i915/gt: Fixup tgl mocs for PTE tracking (bsc#1012628). - commit 3dfd18b - tty: Fix ->session locking (bsc#1179745). - tty: Fix ->pgrp locking in tiocspgrp() (bsc#1179745). - commit 9455f8b - net/x25: prevent a couple of overflows (bsc#1178590). - commit 2a06597 ==== patterns-yast ==== Version update (20191229 -> 20201210) Subpackages: patterns-yast-x11_yast patterns-yast-yast2_basis patterns-yast-yast2_desktop patterns-yast-yast2_install_wf patterns-yast-yast2_server - Do not recomment yast2-fonts (bsc#1179866). - 20201210 ==== python-gst ==== Version update (1.18.1 -> 1.18.2) - Update to version 1.18.2: + No changes. ==== xapps ==== Version update (1.6.10 -> 2.0.0) Subpackages: libxapp1 typelib-1_0-XApp-1_0 xapps-common xapps-common-lang - Update to version 2.0.0. * Bump for favorites support * .gitignore: Ignore the new debian build folder. * favorites: expose xapp_favorites_rename (), it was mistakenly made private during some cleanup. * xapp-gtk3-module.c: Don't initialize favorites until they're needed. * xapp-gtk3-module.c: Register the favorites uri scheme immediately, rather than when XAppFavorites is instantiated. * xapp-favorites: Add missing pointer to the DestroyData. * l10n: Update POT - Updates since 1.6.10. * sn-watcher.c: Move invocation completion to the registration callback. * sn-item.c: use a different method of fetching the pixmap. * Make property-retrieval fully asynchronous. * mate-xapp-status-applet.py: Adapt to change brought by 9c4d5e92d2eb288. * build: Allow making a library-only build for flatpak packaging. * xapp-icon-chooser-button.c: Remove leftover debugging line. * xapp-sn-watcher: Create StatusNotifierItem proxies asynchronously, and don't try to load their properties. * xapp-sn-watcher: Add an app list to flag items that should have their tooltip replaced by the application name. * build: Make build of xapp-sn-watcher optional, defaulting to true. * xapp-sn-watcher: Add key to disable StatusNotifier support, but leave appindicator support enabled. * l10n: Update translations * Update docs * xapp-status-icon.c: Get rid of the dead 'shadow' region around menus, as they can interfere with clicking on the icon to close the menu. * xapp-status-icon: Add new properties for menu/button state handling and one for metadata (miscellaneous info to help define behavior in the status applets). * xapp-sn-watcher: Set status icon metadata for appindicator icons, to inform the applet to highlight/toggle the panel icon with either button click when opening the menu. * mate-xapp-status-applet.py: Use new properties to sync button toggle state with the menu state. * test-scripts: Update some scripts to demonstrate new property use. * sn-item: Remove support for XAyatanaLabel. * xapp-sn-watcher: Update clear the registration list before freeing the table of registered items. * xapp-status-icon.c: Add xapp_status_icon_popup_menu() and use a more reliable GtkMenu popup method. * xapp-status-icon.c: Fix inadvertant verison change in doc string. * Icons: Add symbolic icons for xreaders annotation features * xapp-status-icon: Add a get_visible method. * mate applet: Use markup for tooltips, and update test script to reflect this as well. * mate-xapp-status-applet: Fix set icon error handling when an icon name is missing. * xapp-status-icon: Add a get_visible method. * mate applet: Use markup for tooltips, and update test script to reflect this as well. * mate-xapp-status-applet: Fix set icon error handling when an icon name is missing. * Update documentation * README: Update link to docs * Update README.md * xapp-util.c: Initialize auto variables. * Icons: add pin/unpin symbolic (#90) * Icons: Add xapp-diaporama-symbolic * xapp-sn-watcher: Add autostart file, to start at session, to start at the session initialization phase. * Add a utility function to check for nvidia on-demand mode. * xapp-sn-watcher: Don't enable in MATE * l10n: Fix makepot picking up unwanted service file * Eliminate all appindicator-specific code from xapp-status-icon.c, Add a whitelist for xapp-sn-watcher to list ai icons that should left-click to activate. * l10n: Fix makepot picking up unwanted service file * Eliminate all appindicator-specific code from xapp-status-icon.c, Add a whitelist for xapp-sn-watcher to list ai icons that should left-click to activate. * xapp-sn-watcher: Add a whitelist to manage what desktop environments to start in. * Add option to specify path to pygobject override directory * Install icons and scripts using meson options * xapp-status-icon.c: Sync the visible state of the fallback GtkStatusIcon when it is first created. * xapp-status-icon.c: Fix the timeout duration for xapp_status_icon_any_monitors. * Remove use of deprecated g_type_class_add_private function. * xapp-monitor-blanker: Use G_DECLARE_FINAL_TYPE * xapp-status-icon.c: check if we have a fallback status icon before disconnecting signals from it. * xapp-status-icon.c: Only call gtk_status_icon_set_name() when explicitly requested. * Add StatusNotifier watcher. * mate applet: Set the new icon size property (this provides a hint to xapp-sn-watcher or any client app to provide a correct icon size in some situations). * status icon: Add support for scroll events * debian: Remove python2 deps. * debian/control: Add missing dbusmenu dependency. * Packaging: Re-add python-gi-dev as build-dep * xapp-sn-watcher: rewrite in C due to leaky dbus python bindings. - Removed xapps-python3.patch, fixed. - Removed gtkstatusicon-fix.patch, fixed - Add fix_sn-item_control_reaches_end_of_non-void_function.patch to fix Fix control reaches end of non-void function in sn-item.c ==== xreader ==== Version update (2.6.4 -> 2.8.0) Subpackages: libxreaderdocument3 libxreaderview3 xreader-lang xreader-plugin-comicsdocument xreader-plugin-djvudocument xreader-plugin-dvidocument xreader-plugin-epubdocument xreader-plugin-pdfdocument xreader-plugin-pixbufdocument xreader-plugin-psdocument xreader-plugin-tiffdocument xreader-plugin-xpsdocument - Update to version 2.8.0. * Get toolbar visibility from GtkRevealer when saving view metadata * Add g_assert_not_reached to sizing_mode_to_string * setting to hide/show menubar (WIP) * Update menubar toggle action on init * fix saving menubar visibility as default * Added logic to fix issue of Tab key toggling checkboxes * Fix mimetype handling and backend selection: * Clean up build files * Fix for #89. Added logic to allow for cursor position to change in multiline-text fields * Added keyboard shortcut for toolbar * Fix for #442. Added null check to stop segfault with annotations * Implemented ticket #241. Added show sidebar button to toolbar * Move the new sidebar button to be part of the navigation group on the left end of the toolbar. * Added keyboard shortcuts to history buttons * Favorites - rework startup page to display both favorites and recents, add favorites to the file menu. * Disable pixbuf support properly. * ev-window.c: Temporarily disable menu toggling using the alt key. * Implements ticket #279. Added Go To Page By Number to menu * Displays entire label in tooltip * Revert "Implements ticket #279. Added Go To Page By Number to menu" * l10n: Fix po/POTFILES.in * ev-window-title.c: Don't show "Recent Documents" in the landing page titlebar - it is no longer showing only recents. * l10n: Update POT - Removed fix_ev-window.c_error.patch, fixed. - Add fix_no_return_statement_ev-application.c.patch to fix /shell/ev-application.c error no return statement in function returning non-void.

1 0

[opensuse-factory] Announcement: Run openQA tests with isotovideo in your CI pipelines
by Oliver Kurz 14 Dec '20

14 Dec '20

To all users of openQA or anyone interested in running system-level tests in CI jobs, I would like to make you aware of a new approach for running system-level tests using "isotovideo", the main backend of openQA tests, within continuous integration (CI) services, for example github actions, travis CI, gitlab CI, etc. Following an updated section https://github.com/os-autoinst/os-autoinst#getting-started it is possible to run "openQA tests" using a simple, convenient container based on tests that can be provided for example in a git repository. An easy example is described in https://github.com/os-autoinst/os-autoinst-distri-example#local-testing-and… Find the latest example CI run directly following https://github.com/os-autoinst/os-autoinst-distri-example/actions I consider the above approach very suitable if one wants to run system level tests following the "openQA test API" in any project where direct feedback from CI jobs is appreciated but only a limited number of test scenarios are needed, no heavy visual tests are run where the openQA web UI would provide a more convenient interface, or when wanting to test changes to already existing openQA tests but in pull requests before they are merged. For more elaborate examples a complete openQA setup is more suitable. If you want to read more about openQA in general visit http://open.qa/ There is also a single HTML file document http://open.qa/docs/ as well as a PDF version http://open.qa/docs/current.pdf Have fun, Oliver

2 2

Tumbleweed - Review of the week 2020/50
by Dominique Leuenberger / DimStar 13 Dec '20

13 Dec '20

Dear Tumbleweed users and hackers, The weekly review for 2020/50 is a bit late, but technically, it is still week 50, so ‘just in time’. Since my last review, Tumbleweed has managed to publish 5 snapshots (1203, 1205, 1207, 1209 and 1211). The fact that they are 2-day intervals is pure co-incidence and by no means planned. 1204 simply never was published, as 1205 reached QA before all reviews could be completed and the snapshot was discarded. 1206 was not produced, as I skipped the check-ins last Sunday. 1208 was again a ‘too fast build compared to test time; and 1210 was discarded due to packaging / build issues around the kubernetes 1.20 updates. Anyway, the five snapshots that were published accumulated these changes: * KDE Plasma 5.20.4 * gdb 10.1: now with debuginfod support * Pulseaudio 14.0 * Mozilla Thunderbird 78.5.1 * Linux kernel 5.9.12 * SQLite 3.34.0 * Mesa 20.2.4 * NetworkManager 1.28.0 * QEmu 5.2.0 * Wine 6.0 rc1 * Kubernetes 1.20 The staging projects are currently filled with these updates/changes: * KDE Applications 20.12 (currently RC being tested) * icu 68.1: breaks a couple of builds (Staging:I) * brp-check-suse: a bug fix in how it detected dangling symlinks (it detected them, but did not fail as it was supposed to) * permissions package: prepares for easier listing, while supporting a full /usr merge * RPM 4.16: still a few packages build failures (Mozilla *, openblas) * Ruby 3.0: mainly YaST not ready for that switch. We are likely to stay on 2.7 as ‘default ruby’ version, but add rubygem packages for Ruby 3.0 by end of the year * First experiments with rpmlint 2.0 started in Staging:M * openssl 3.0: currently alpha 9 in Staging:O Cheers, Dominique

1 0

Package removal: sawfish
by Dominique Leuenberger / DimStar 12 Dec '20

12 Dec '20

Dear Tumbleweed users and hacker, 10 days ago I have filed a delete request against openSUSE:Factory/sawfish. The package has had the last successful build on 2019-10-11 16:52:05 and the first failed recored at 2020-05-30 21:01:20 Since then, no fixes were submitted, and the delete request did also not get any comments - implying that the package is abandoned Together with sawfish, this will also hit the package sawfish-pager (which does build at the moment, but without sawfish becomes useless). Is there anybody that would like sawfish to remain and wants to give a stab at fixing it? If so, please let me knwo - so we can stop the DR. Of course, even if deleted, the package can be re-added at any moment if/when it builds again. Cheers, Dominique

3 3

New Tumbleweed snapshot 20201211 released!
by Dominique Leuenberger 12 Dec '20

12 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: busybox-links drbd (9.0.25~0+git.bd41626d -> 9.0.26~0+git.9114a038) kcm5-fcitx libressl (3.2.2 -> 3.2.3) lightdm mdevctl (0.61 -> 0.78) openldap2 (2.4.55 -> 2.4.56) perl-Mojolicious (8.66 -> 8.67) polkit-default-privs (1550+20201119.2c1dce4 -> 1550+20201208.135bf51) postgresql13 qemu (5.1.0 -> 5.2.0) remmina (1.4.9 -> 1.4.10) rubygem-autoprefixer-rails (10.0.1.3 -> 10.1.0.0) rubygem-erubi (1.9.0 -> 1.10.0) rubygem-loofah (2.7.0 -> 2.8.0) rubygem-passenger (6.0.6 -> 6.0.7) rubygem-puma (5.0.4 -> 5.1.1) rubygem-tzinfo (2.0.2 -> 2.0.3) rubygem-zeitwerk (2.4.1 -> 2.4.2) scim supermin (5.1.20 -> 5.2.0) virtualbox (6.1.14 -> 6.1.16) virtualbox-kmp (6.1.14_k5.9.12_1 -> 6.1.16_k5.9.12_1) xdm yast2-network (4.3.30 -> 4.3.31) === Details === ==== busybox-links ==== Subpackages: busybox-coreutils busybox-findutils busybox-gawk busybox-grep busybox-gzip busybox-patch busybox-psmisc busybox-sed busybox-sendmail busybox-tar busybox-xz - busybox-adduser needs "nogroup" for system accounts, which have no group specified. ==== drbd ==== Version update (9.0.25~0+git.bd41626d -> 9.0.26~0+git.9114a038) Subpackages: drbd-kmp-default - bsc#1179708, compat to kernel v5.10 - Add patch compat_get_fs.patch Add patch remove_bdi_cap_stable_writes.patch - Update to 9.0.26 * fix a case of a disk unexpectedly becoming Outdated by moving the exchange of the initial packets into the body of the two-phase-commit that happens at a connect * fix adding of new volumes to resources with a primary node * reliably detect split brain situation on both nodes * fix an unexpected occurrence of NetworkFailure state in a tight drbdsetup disconnect; drbdsetup connect sequence * fix online verify to return to Established from VerifyS if the VerifyT node was temporarily Inconsistent during the run * fix a corner case where a node ends up Outdated after the crash and rejoin of a primary node * implement 'blockdev --setro' in DRBD * following upstream changes to DRBD up to Linux 5.9 and ensure compatibility with Linux 5.8 and 5.9 * fix a crash if during resync a discard operation fails on the resync-target node * fix online verify to not clamp disk states to UpToDate * fix promoting resync-target nodes; the problem was that it could modify the bitmap of an ongoing resync; which leads to alarming log messages * pause a resync if the sync-source node becomes inconsistent; an example is a cascading resync where the upstream resync aborts and leaves the sync-source node for the downstream resync with an inconsistent disk; note, the node at the end of the chain could still have an outdated disk (better than inconsistent) * allow force primary on a sync-target node by breaking the resync * minor fixes to the compat tests * fix for writes not getting mirrored over a connection while the primary transitions through the WFBitMapS state * completed missing logic of the new two-phase-commit based connect process; avoid connecting partitions with a primary in each; ensure consistent decisions if the connect attempt will be retried - Add patch compat-test-header.patch Add patch submit-bio-private-date.patch - Remove patch rely-on-sb-handlers.patch (187bddac0) Remove patch fix-err-of-wrong-return-type.patch (969310232) Remove patch compat_remove_pgprot_88dca4c.patch (ee025dc84) Remove patch compat_generic_make_request.patch (8615d6837) Remove patch blk_alloc_queue_make_request.patch (edaa9b0f/fb59b40e) Remove patch remove_congested_fn_congested_data.patch (34484003/9b80d46b) - Modify patch compat_remove_kernel_setsockopt.patch (518846b54) Modify patch compat_blk_queue_stack_limits.patch (edaa9b0f2) ==== kcm5-fcitx ==== Subpackages: kf5-kcm-fcitx kf5-kcm-fcitx-icons - fix-building-with-qt-5.12.patch does not work as it said, it should detect Qt version by itself - Add patch to build with Qt 5.12 which doesn't have QList::swapItemsAt. The patch is only applied if Qt < 5.13 is being used to build the package. * fix-building-with-qt-5.12.patch ==== libressl ==== Version update (3.2.2 -> 3.2.3) Subpackages: libcrypto46 libssl48 libtls20 - Update to release 3.2.3 * Fixed: Malformed ASN.1 in a certificate revocation list or a timestamp response token could lead to a NULL pointer dereference. ==== lightdm ==== Subpackages: liblightdm-gobject-1-0 lightdm-lang - Only build the qt4 subpackage up to Leap 15.2 / SLE 15 SP2 (boo#1179613) ==== mdevctl ==== Version update (0.61 -> 0.78) - Update to version 0.78: * Automatic version commit for tag 0.78 * use standard bash path * avoid other tags spilling into the .spec changelog * mdevctl: fix cleanup on error when creating and removing mdev * version support * Fix attributes getting applied via start-parent-mdevs * mdevctl: fix cleanup on error when writing to attribute * Remove never used 'available' option * Fix attribute validation jsc#SLE-15861, bsc#1179770 ==== openldap2 ==== Version update (2.4.55 -> 2.4.56) Subpackages: libldap-2_4-2 libldap-2_4-2-32bit libldap-data openldap2-client - updated to 2.4.56 OpenLDAP 2.4.56 Release (2020/11/10) Fixed slapd to remove assert in certificateListValidate (ITS#9383) Fixed slapd to remove assert in csnNormalize23 (ITS#9384) Fixed slapd to better parse ldapi listener URIs (ITS#9379) ==== perl-Mojolicious ==== Version update (8.66 -> 8.67) - updated to 8.67 see /usr/share/doc/packages/perl-Mojolicious/Changes 8.67 2020-12-04 - Deprecated Mojolicious::Routes::Route::route in favor of Mojolicious::Routes::Route::any. - Deprecated Mojolicious::Routes::Route::over in favor of Mojolicious::Routes::Route::requires. - Deprecated Mojolicious::Routes::Route::via in favor of Mojolicious::Routes::Route::methods. - Deprecated Mojolicious::Routes::Route::detour. - Added methods and requires methods to Mojolicious::Routes::Route. - Improved Mojolicious::Commands to throw an exception for invalid commands. ==== polkit-default-privs ==== Version update (1550+20201119.2c1dce4 -> 1550+20201208.135bf51) - Update to version 1550+20201208.135bf51: * libvirt: allow the active session to create read-only connections (bsc#1179126) * profiles: cleanup outdates keep_always entries ==== postgresql13 ==== Subpackages: libpq5 postgresql13-contrib postgresql13-docs postgresql13-llvmjit postgresql13-server - bsc#1178961: %ghost the symlinks to pg_config and ecpg. - boo#1179765: BuildRequire libpq5 and libecpg6 when not building them to avoid dangling symlinks in the devel package. ==== qemu ==== Version update (5.1.0 -> 5.2.0) Subpackages: qemu-arm qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-nfs qemu-block-rbd qemu-block-ssh qemu-chardev-baum qemu-guest-agent qemu-hw-display-qxl qemu-hw-usb-redirect qemu-hw-usb-smartcard qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-microvm qemu-ppc qemu-seabios qemu-sgabios qemu-skiboot qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-spice-app qemu-vgabios qemu-vhost-user-gpu qemu-x86 - Update to v5.2.0: See http://wiki.qemu.org/ChangeLog/5.2 Take note that ongoing feature deprecation is tracked at both http://wiki.qemu-project.org/Features/LegacyRemoval and in the deprecated.html file installed with the qemu package Some noteworthy changes: * Dropped system emulators: qemu-system-lm32, qemu-system-unicore32 * Dropped linux user emulator: qemu-ppc64abi32 * Added linux user emulator: qemu-extensaeb * Unicore32 and lm32 guest support dropped * New sub-packages (most due to ongoing modularization of QEMU): qemu-audio-spice, qemu-hw-chardev-spice, qemu-hw-display-virtio-vga, qemu-hw-display-virtio-gpu, qemu-hw-display-virtio-gpu-pci, qemu-ui-spice-core, qemu-ui-opengl, qemu-ivshmem-tools * x86: A new KVM feature which improves the handling of asynchronous page faults is available with -cpu ...,kvm-async-pf-int (requires Linux 5.8) * s390: More instructions emulated under TCG * PowerPC: nvdimm= machine option now functions correctly; misc improvements * ARM: new boards: mps2-an386 (Cortex-M4 based) and mps2-an500 (Cortex-M7 based), raspi3ap (the Pi 3 model A+), raspi0 (the Pi Zero) and raspi1ap (the Pi A+) * RISC-V: OpenSBI v0.8 included by default; Generic OpenSBI platform used when no -bios argument is supplied; Support for NUMA sockets on Virt and Spike Machines; Support for migrating machines; misc improvements * Misc NVMe improvements * The 'vhost-user-blk' export type has been added, allowing qemu-storage-daemon to act as a vhost-user-blk device backend * The SMBIOS OEM strings can now come from a file * 9pfs - misc performance related improvements * virtiofs - misc improvements * migration: The default migration bandwidth has been increased to 1Gbps (users are still encouraged to tune it to their own hardware); The new 'calc-dirty-rate' and 'query-dirty-rate' QMP commands can help determine the likelihood of precopy migration success; TLS+multifd now supported for higher bandwidth encrypted migration; misc minor features added * Misc minor block features added * Misc doc improvements * qemu-microvm subpackage change: the bios-microvm.bin is now SeaBIOS based, and the qboot based on is now qboot.rom * elf2dmp is no longer part of qemu-tools (it was never intended to be a packaged binary) * Some subpackages which were 'Requires' are now 'Recommends', allowing for a smaller qemu packaging footprint if needed * Patches dropped (included in release tarball, unless otherwise noted): docs-fix-trace-docs-build-with-sphinx-3..patch (fixed differently) hw-hyperv-vmbus-Fix-32bit-compilation.patch linux-user-properly-test-for-infinite-ti.patch Switch-order-of-libraries-for-mpath-supp.patch (fixed differently) Conditionalize-ui-bitmap-installation-be.patch (fixed differently) hw-usb-hcd-xhci-Fix-GCC-9-build-warning.patch (no longer using gcc9) hw-usb-dev-mtp-Fix-GCC-9-build-warning.patch (no longer using gcc9) roms-Makefile-enable-cross-compile-for-b.patch (fixed with different patch) libvhost-user-handle-endianness-as-manda.patch virtio-add-vhost-user-fs-ccw-device.patch Fix-s-directive-argument-is-null-error.patch build-Workaround-compilation-error-with-.patch build-Be-explicit-about-fcommon-compiler.patch intel-Avoid-spurious-compiler-warning-on.patch golan-Add-explicit-type-casts-for-nodnic.patch Do-not-apply-WORKAROUND_CFLAGS-for-host-.patch ensure-headers-included-are-compatible-w.patch Enable-cross-compile-prefix-for-C-compil.patch (fixed differently) hw-net-net_tx_pkt-fix-assertion-failure-.patch hw-net-xgmac-Fix-buffer-overflow-in-xgma.patch s390x-protvirt-allow-to-IPL-secure-guest.patch usb-fix-setup_len-init-CVE-2020-14364.patch * Patches added: meson-install-ivshmem-client-and-ivshmem.patch Revert-roms-efirom-tests-uefi-test-tools.patch Makefile-Don-t-check-pc-bios-as-pre-requ.patch roms-Makefile-add-cross-file-to-qboot-me.patch qboot-add-cross.ini-file-to-handle-aarch.patch usb-Help-compiler-out-to-avoid-a-warning.patch - In spec file, where reasonable, switch BuildRequires: XXX-devel to be pkgconfig(XXX') instead - No longer disable link time optimization for qemu for x86. It looks like either the build service, qemu code changes and/or the switch to meson have resolved issues previously seen there. We still see problems for other architectures however. - For the record, the following issues reported for SUSE SLE15-SP2 are either fixed in this current package, or are otherwise no longer an issue: bsc#1172384 bsc#1174386 bsc#1174641 bsc#1174863 bsc#1175370 bsc#1175441 bsc#1176494 CVE-2020-13361 CVE-2020-14364 CVE-2020-15863 CVE-2020-16092 CVE-2020-24352 and the following feature requests are satisfied by this package: jsc#SLE-13689 jsc#SEL-13780 jsc#SLE-13840 - To be more accurate, and to align with other qemu packaging practices, rename the qemu-s390 package to qemu-s390x. The old name (in the rpm namespace) is provided with a "Provides" directive, and an "Obsoletes" done against that name for prior qemu versions, as is standard practice (boo#1177764 jsc#SLE-17060) - Take this opportunity to remove some ancient Split-Provides mechanisms which can't conceivably be needed any more: qemu-block-curl provided: qemu:%_libdir/%name/block-curl.so qemu-guest-agent provided: qemu:%_bindir/qemu-ga qemu-tools provided: qemu:%_libexecdir/qemu-bridge-helper - Disable linux-user 'ls' test on 32 bit arm. It's failing with "Allocating guest commpage: Cannot allocate memory" error, which we should hunt down, but for now we don't want it to prevent the package from being built ==== remmina ==== Version update (1.4.9 -> 1.4.10) Subpackages: remmina-lang remmina-plugin-rdp remmina-plugin-secret remmina-plugin-vnc remmina-plugin-xdmcp - Update to release 1.4.10 * Resolve "RDP Black Screen on connection" !2123 @antenore * Correctly importing and exporting audiocapturemode, closes #2349 !2124 @antenore * [RFC] rdp: add Use base credential for RD gateway authentication !2125 @Fantu * Resolve "Auto accept changes to fingerprints and auto accept certificates" !2126 @antenore * "Fingerprinters" corrected to "fingerprints". !2127 @kingu * Implementing network type option !2128 @antenore * Improving the terminal colour file picker !2129 @antenore * Resolve "[RDP] Since v1.4.9 Audio is no longer working" !2130 @antenore * New connection strings corrected !2131 @kingu * Correct location of Terminal colour scheme setting !2132 @kingu * Fixing pulseaudio LD_LIBRARY_PATH and staging PA libraries !2136 @antenore * [RFC][v2] RDP: Add Use base credential for RD gateway authentication !2135 @Fantu * fix incorrect name date log sessions ssh !2137 @acendrou * Resolve "Strange padding in main window" !2138 @antenore * Remove legacy rfx code !2139 @antenore * Resolve "RDP export features does not properly include gatewayhostname" !2140 @antenore * RDP log filters keep previous value across connections !2143 @antenore * [RFC][v2] RDP: Add Use base credential for RD gateway authentication !2135 @Fantu * Emit warning if libkf5wallet missing but required by -DWITH_KF5WALLET=ON !2144 @giox069 * Do not activate performance optimisations based on network type unless explicitly requested. !2145 @antenore ==== rubygem-autoprefixer-rails ==== Version update (10.0.1.3 -> 10.1.0.0) - updated to version 10.1.0.0 * Fixed `Cannot read property 'proxyOf' of undefined` error (by Igor Kamyshev). * Added `dpcm` unit support to `min-resolution: 2dppx` (by Robert Eisele). * Fixed rational approximation in `min-resolution` (by Robert Eisele). ==== rubygem-erubi ==== Version update (1.9.0 -> 1.10.0) - updated to version 1.10.0 * Improve template parsing, mostly by reducing allocations (jeremyevans) * Do not ship tests in the gem, reducing gem size about 20% (jeremyevans) * Support :literal_prefix and :literal_postfix options for how to output literal tags (e.g. <%% code %>) (jaredcwhite) (#26, #27) ==== rubygem-loofah ==== Version update (2.7.0 -> 2.8.0) - updated to version 2.8.0 * Allow CSS properties `order`, `flex-direction`, `flex-grow`, `flex-wrap`, `flex-shrink`, `flex-flow`, `flex-basis`, `flex`, `justify-content`, `align-self`, `align-items`, and `align-content`. [[#197](https://github.com/flavorjones/loofah/issues/197)] (Thanks, [@miguelperez](https://github.com/miguelperez)!) ==== rubygem-passenger ==== Version update (6.0.6 -> 6.0.7) Subpackages: ruby2.7-rubygem-passenger rubygem-passenger-apache2 - updated to version 6.0.7 * Addresses regression introduced in 6.0.5 when attempting to establish database connection after fork and activerecord is not configured in the expected way. Closes GH-2281. * Addresses regression introduced in 5.1.5 where hook scripts would fail to run. As a result the PASSENGER_ERROR_PAGE and PASSENGER_CONFIG_MANIFEST env vars have been removed from the passenger hook script environment. * Match static rails assets on 8-digit content hash. Contributed by @mattozinga. * Allow skipping the Apache/Nginx sections of the `passenger-memory-stats` output, through the `--no-apache` and `--no-nginx` commandline options. Closes GH-2306. Contributed by Saverio Miroddi (@saveriomiroddi). * Fixes an issue where `passenger-memory-stats` would throw an error if a process went away while it was running. Closes GH-2305. * Fixes a formatting issue with apr-1 include flags on macOS. * Fixes a warning about BOOST_*_ENDIAN macros being deprecated by migrating to new suggested macros. * Fixes an occasional issue with the node loader where the startup handshake would fail to record progress. * Adds an option for specifying the address to bind ruby apps to, for sending requests directly to specific app instances: - Standalone: direct_instance_request_address - Nginx: passenger_direct_instance_request_address - Apache: PassengerDirectInstanceRequestAddress * Updated various library versions used in precompiled binaries (used for e.g. gem installs): - ccache: 4.0 (was: 3.7.10) - curl: 7.73.0 (was: 7.71.1) - git: 2.29.1 (was: 2.27.0) - gnupg: 2.2.23 (was: 2.2.21) - libgpg_error: 1.39 (was: 1.38) - ruby: 2.7.2 (was: 2.7.1) - libassuan 2.5.4 (was: 2.5.3) - libgcrypt 1.8.7 (was 1.8.6) - OpenSSL 1.1.1h (was 1.0.2u) - added apache-rpm-macros and apache2-utils to gem2rpm.yml file (otherwise the dependencies are missing when generating the spec file again) - use system apache rpm macros - require apache2-utils for build (apachectl) ==== rubygem-puma ==== Version update (5.0.4 -> 5.1.1) [#]# 5.1.1 / 2020-12-10 * Bugfixes * Fix over eager matching against banned header names ([#2510]) [#]# 5.1.0 / 2020-11-30 * Features * Phased restart availability is now always logged, even if it is not available. * Prints the loaded configuration if the environment variable `PUMA_LOG_CONFIG` is present ([#2472]) * Integrate with systemd's watchdog and notification features ([#2438]) * Adds max_fast_inline as a configuration option for the Server object ([#2406]) * You can now fork workers from worker 0 using SIGURG w/o fork_worker enabled [#2449] * Add option to bind to systemd activated sockets ([#2362]) * Add compile option to change the `QUERY_STRING` max length ([#2485]) * Bugfixes * Fix JRuby handling in Puma::DSL#ssl_bind ([#2489]) * control_cli.rb - all normal output should be to @stdout ([#2487]) * Catch 'Error in reactor loop escaped: mode not supported for this object: r' ([#2477]) * Ignore Rails' reaper thread (and any thread marked forksafe) for warning ([#2475]) * Ignore illegal (by Rack spec) response header ([#2439]) * Close idle connections immediately on shutdown ([#2460]) * Fix some instances of phased restart errors related to the `json` gem ([#2473]) * Remove use of `json` gem to fix phased restart errors ([#2479]) * Fix grouping regexp of ILLEGAL_HEADER_KEY_REGEX ([#2495])- ==== rubygem-tzinfo ==== Version update (2.0.2 -> 2.0.3) - updated to version 2.0.3 * Added support for handling "slim" format zoneinfo files that are produced by default by zic version 2020b and later. The POSIX-style TZ string is now used calculate DST transition times after the final defined transition in the file. [#120]. * Fixed `TimeWithOffset#getlocal` returning a `TimeWithOffset` with the `timezone_offset` still assigned when called with an offset argument on JRuby 9.3. * Rubinius is no longer supported. ==== rubygem-zeitwerk ==== Version update (2.4.1 -> 2.4.2) - updated to version 2.4.2 * Implements `Zeitwerk::Loader#on_load`, which allows you to configure blocks of code to be executed after a certain class or module have been loaded: ```ruby [#] config/environments/development.rb loader.on_load("SomeApiClient") do SomeApiClient.endpoint = "https://api.dev" [#] config/environments/production.rb loader.on_load("SomeApiClient") do SomeApiClient.endpoint = "https://api.prod" end ``` See the [documentation](https://github.com/fxn/zeitwerk/blob/master/README.md#the-on… for further details. ==== scim ==== Subpackages: scim-gtk scim-gtk-32bit scim-gtk3 scim-lang - Do not build the qt4 subpackage for Leap 15.3 or newer (boo#1179613). ==== supermin ==== Version update (5.1.20 -> 5.2.0) - update to 5.2.0: * rpm: extend the Multiple_matches exception * Use external command mv to rename old output directory (RHBZ#1670191). * rpm: do not unpack parameters * rpm: fix version comparison * rpm: provide a dummy supermin_rpm_get_arch implementation * ext2: Build symbolic links correctly (RHBZ#1770304). * Update gnulib to latest. - switch to release tarball, use keyring for gpg validation - run tests ==== virtualbox ==== Version update (6.1.14 -> 6.1.16) Subpackages: virtualbox-guest-tools virtualbox-guest-x11 - Add vb-6.1.16-modal-dialog-parent.patch in order to solve the file selector dialog mouse control issues - Fix build with RPM 4.16: Do not install files to buildroot during the build phase: - Do not forcibly require systemd: systemd_ordering is sufficient. - Add linux-5.10-r0drv-memobj-fix-r0.patch to fix build with kernel 5.10 - Add linux-5.10-address-space-fixes.patch to fix sharedfolders with 5.10 - Add linux-5.10-framebuffer-fixes.patch to fix framebuffer with 5.10 - Version bump to 6.1.16 (released October 16 2020 by Oracle) This is a maintenance release. The following items were fixed and/or added: File "fixes_for_5.9.patch" deleted - fixed upstream. VMM: Fixed random memory corruption and XMM register state corruption inside the VM when Hyper-V is used (bug #19695) VMM: Fixed VMSVGA 3D support with Linux guests when Hyper-V is used (bug #19884) GUI: Fixed some Qt related crashes on macOS Big Sur Oracle Cloud Infrastructure integration: Fixed network integration not working behind some proxies USB: Mask out remote wake capability to avoid unresponsive devices Audio: Fixed issues with audio playback after host goes to sleep (bug #18594) Serial: Keep transferring data if the status line monitoring fails Serial: Fixed blocking a re-connect when TCP mode is used (bug #19878) HPET: Fixed inability of guests to use the last timer VBoxManage: Fixed detection of system locale when running 'VBoxManage unattended install' without --locale (bug #19856) Linux host and guest: Support kernel version 5.9 (bug #19845) Linux guest: Workaround to improve resizing of 32-bit VMs with VMSVGA graphics controller, and do not try to use RandR version 1.3 due to bugs causing the X server to hang Linux guest: Fixed VBoxService crashing in the CPU hot-plug service under certain circumstances during a CPU hot-unplug event (bugs #19902 and #19903) Linux guest: Fixed Guest additions build for RHEL 8.3 beta (bug #19863) ==== virtualbox-kmp ==== Version update (6.1.14_k5.9.12_1 -> 6.1.16_k5.9.12_1) - Add vb-6.1.16-modal-dialog-parent.patch in order to solve the file selector dialog mouse control issues - Fix build with RPM 4.16: Do not install files to buildroot during the build phase: - Do not forcibly require systemd: systemd_ordering is sufficient. - Add linux-5.10-r0drv-memobj-fix-r0.patch to fix build with kernel 5.10 - Add linux-5.10-address-space-fixes.patch to fix sharedfolders with 5.10 - Add linux-5.10-framebuffer-fixes.patch to fix framebuffer with 5.10 - Version bump to 6.1.16 (released October 16 2020 by Oracle) This is a maintenance release. The following items were fixed and/or added: File "fixes_for_5.9.patch" deleted - fixed upstream. VMM: Fixed random memory corruption and XMM register state corruption inside the VM when Hyper-V is used (bug #19695) VMM: Fixed VMSVGA 3D support with Linux guests when Hyper-V is used (bug #19884) GUI: Fixed some Qt related crashes on macOS Big Sur Oracle Cloud Infrastructure integration: Fixed network integration not working behind some proxies USB: Mask out remote wake capability to avoid unresponsive devices Audio: Fixed issues with audio playback after host goes to sleep (bug #18594) Serial: Keep transferring data if the status line monitoring fails Serial: Fixed blocking a re-connect when TCP mode is used (bug #19878) HPET: Fixed inability of guests to use the last timer VBoxManage: Fixed detection of system locale when running 'VBoxManage unattended install' without --locale (bug #19856) Linux host and guest: Support kernel version 5.9 (bug #19845) Linux guest: Workaround to improve resizing of 32-bit VMs with VMSVGA graphics controller, and do not try to use RandR version 1.3 due to bugs causing the X server to hang Linux guest: Fixed VBoxService crashing in the CPU hot-plug service under certain circumstances during a CPU hot-unplug event (bugs #19902 and #19903) Linux guest: Fixed Guest additions build for RHEL 8.3 beta (bug #19863) ==== xdm ==== Subpackages: xdm-xsession - fixed %postun for older releases than factory/TW (see change right below, which broke it) ==== yast2-network ==== Version update (4.3.30 -> 4.3.31) - Clean the ifcfg file cached data before the connection configuration changes are written (bsc#1178950) - 4.3.31

1 0

fetchmsttfonts 11.4-45.2 -> 11.4-46.1
by Patrick Shanahan 12 Dec '20

12 Dec '20

something not kosher here: https://download.opensuse.org/repositories/graphics/openSUSE_Tumbleweed/ (1/2) Installing: fetchmsttfonts-11.4-46.1.noarch .............................................................................................[done] (2/2) Installing: rawtherapee-unstable-5.8~git.20201102.2549.g7fd570706-826.12.x86_64 .........................................................[done] Executing %posttrans scripts ..................................................................................................................[done] Running: fetchmsttfonts-11.4-46.1-fetchmsttfonts.sh.txt (fetchmsttfonts, /var/adm/update-scripts) EULA: Fetching ... done andale32.exe (https://sourceforge.net/projects/corefonts/files/the%20fonts/final/andale32…) Fetching ... failed ... deleted! arial32.exe (https://sourceforge.net/projects/corefonts/files/the%20fonts/final/arial32.…) Fetching ... failed ... deleted! ... tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode

5 14

Managing list offtopicness better.
by Simon Lees 12 Dec '20

12 Dec '20

Hi All, The board has noticed an again increasing amount of offtopic discussion on both the Project and Factory mailing lists, including some users having longer then needed conversations drawn out over a significant number of emails per thread. Our new mailing list setup has given us some more options with regards to this. In particular the board has decided that users who regularly take the list off topic from now will be placed under moderation for a period of time. To help facilitate this the board has asked the mailing list admin's to create a mailing list moderation team with enough people to reasonably cover all timezones, once this team is created it should be able to become self sustaining like the forum moderators for example. If you are passionate about this and believe you would be a good candidate feel free to contact the mailing list admins at admin(a)o.o as I believe they are looking for a couple more candidates especially in European timezones. As a reminder the project mailing list is for non technical project wide / community wide discussions. The factory list is strictly for development discussions, with a reminder that we have the support list and forums for user support, the user list for general discussion and an offtopic list for everything else. There are also many other lists for specific topics and languages you can find a link to them all below, the link below that covers all the other places you can interact with the community https://lists.opensuse.org/archives/ https://en.opensuse.org/openSUSE:Communication_channels -- Simon Lees (Simotek) http://simotek.net Emergency Update Team keybase.io/simotek SUSE Linux Adelaide Australia, UTC+10:30 GPG Fingerprint: 5B87 DB9D 88DC F606 E489 CEC5 0922 C246 02F0 014B

1 0

Announcement:New openQA features available: Custom hook scripts on "job done" + the auto-review workflow
by Oliver Kurz 11 Dec '20

11 Dec '20

To all users of openQA, good news everyone! openQA has gained a new feature called "Custom hook scripts on 'job done' based on result". With this every openQA instance can be configured to run custom scripts or applications whenever a openQA job finishes. Based on the result of the job different scripts can be called, for example for a "failed" or "incomplete" or "passed" job. Next to the already existing AMQP events (http://open.qa/docs/#_configuring_amqp_message_emission) in openQA this could be used to send notifications, trigger other steps of a bigger CI pipeline or run additional analysis steps on test results. Our common openSUSE instance openqa.opensuse.org is using this feature already and triggers the so called "auto-review"-workflow, see https://github.com/os-autoinst/scripts/#auto-review---automatically-detect-… for details. With this incomplete and failed jobs are automatically labeled with ticket links for "known issues" based on simple regex strings specified in tickets on progress.opensuse.org, our main issue tracker for test issues. Also, where specified accordingly in these tickets, jobs are automatically retriggered. With this we envision that the review of openQA test results can become much easier. Of course we are never tired to improve the workflows even further, work on new ideas and improve the overall quality even more. If you want to know more about openQA in general visit http://open.qa/ Have fun, Oliver for the SUSE QE Tools team

3 2

New Tumbleweed snapshot 20201209 released!
by Dominique Leuenberger 10 Dec '20

10 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: Mesa (20.2.3 -> 20.2.4) Mesa-drivers (20.2.3 -> 20.2.4) ModemManager (1.14.6 -> 1.14.8) NetworkManager (1.26.4 -> 1.28.0) apache2 apache2-prefork apache2-utils bind (9.16.7 -> 9.16.8) busybox cryptsetup firewalld (0.9.0 -> 0.9.1) fprintd (1.90.4 -> 1.90.6) gdb gdk-pixbuf (2.42.0 -> 2.42.2) gnome-chess (3.38.0 -> 3.38.1) gpgme gpgmeqt gtk3 (3.24.23+118 -> 3.24.24) hplip (3.20.6 -> 3.20.9) hwdata (0.341 -> 0.342) libical libical-glib libqb (2.0.1+20200729.416caf2 -> 2.0.2+20201203.def947e) libstorage-ng (4.3.71 -> 4.3.72) libvirt lvm2 lvm2-device-mapper memcached (1.6.7 -> 1.6.9) mutt (2.0.2 -> 2.0.3) net-snmp netcat-openbsd nodejs14 opensc (0.19.0 -> 0.21.0) php7 plymouth (0.9.5+git20200921+20778f2 -> 0.9.5+git20201026+53c83cc) poppler (20.10.0 -> 20.12.0) poppler-qt5 (20.10.0 -> 20.12.0) procps psmisc python-dkimpy (1.0.3 -> 1.0.5) rubygem-net-ssh (6.1.0 -> 6.2.0.rc1) smp_utils subversion sudo (1.9.3p1 -> 1.9.4) sysconfig sysvinit (2.97 -> 2.98) telepathy-glib telepathy-logger tigervnc vim (8.2.2039 -> 8.2.2105) vlan webkit2gtk3 xfsdump xorg-x11-server (1.20.9 -> 1.20.10) yast2-firstboot (4.3.8 -> 4.3.9) yast2-installation (4.3.22 -> 4.3.24) yast2-trans (84.87.20201130.b140fdb5f7 -> 84.87.20201205.6b65f14502) === Details === ==== Mesa ==== Version update (20.2.3 -> 20.2.4) Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - update to 20.2.4 * fourth (second to last) bugfix release for the 20.2 branch ==== Mesa-drivers ==== Version update (20.2.3 -> 20.2.4) Subpackages: Mesa-dri Mesa-dri-nouveau Mesa-gallium Mesa-libva libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libvulkan_radeon libxatracker2 - update to 20.2.4 * fourth (second to last) bugfix release for the 20.2 branch ==== ModemManager ==== Version update (1.14.6 -> 1.14.8) Subpackages: ModemManager-bash-completion ModemManager-lang libmm-glib0 - Update to version 1.14.8: + Build: - Fixed distcheck with new gtk-doc releases. - ModemManager-names.h was being included in the dist tarball, but then removed on the 'clean' target. Fix that, by only removing it on the 'maintainer-clean' target. Therefore, 'xsltproc' is now only needed in git builds, not needed when building from a dist tarball. + QMI: - Fix daemon crash when the device is removed during the initialization sequence. + Several other minor improvements and fixes. - Drop libxslt-tools BuildRequires: No longer needed. ==== NetworkManager ==== Version update (1.26.4 -> 1.28.0) Subpackages: NetworkManager-lang libnm0 typelib-1_0-NM-1_0 - Update to version 1.28.0: + Change the behavior of nm-initrd-generator so that the 'ip=off|none' kernel cmdline argument actually generates a connection which disables both ipv4 and ipv6. Previously the generated connection would disable ipv4 but ipv6 would be set to the 'auto' method. ==== apache2 ==== - Require /usr/bin/which instead of which: allow usage of busybox variant for containers. - apache2 main package recommends apache2-utils - break some long lines in the spec as requested by review team - maybe make spec acceptable for factory bot - modified sources % _multibuild - buildrequire netcfg for tests - remove Requires(post): firewalld hard dependency (this is already handled by the %firewalld_reload macro) - package reworked trough [bsc#1178478] - modified patches % apache2-mod_proxy_uwsgi-fix-crash.patch (refreshed) - modified sources % apache2-loadmodule.conf % apache2-manual.conf % apache2-script-helpers % apache2@.service % sysconfig.apache2 - deleted patches - deprecated-scripts-arch.patch (not needed) - httpd-2.0.54-envvars.dif (not needed) - httpd-2.1.3alpha-layout.dif (renamed to apache2-system-dirs-layout.patch) - httpd-2.2.0-apxs-a2enmod.dif (not needed) - httpd-2.4.9-bnc690734.patch (renamed to apache2-LimitRequestFieldSize-limits-headers.patch) - httpd-2.4.x-fate317766-config-control-two-protocol-options.diff (renamed to apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch) - httpd-2.x.x-logresolve.patch (renamed to apache2-logresolve-tmp-security.patch) - httpd-apachectl.patch (renamed to apache2-apachectl.patch) - httpd-implicit-pointer-decl.patch (not needed) - httpd-visibility.patch (not needed) - deleted sources - SUSE-NOTICE (outdated) - a2enflag (renamed to apache2-a2enflag) - a2enmod (renamed to apache2-a2enmod) - apache-22-24-upgrade (outdated) - apache2-README (outdated) - apache2-README.QUICKSTART (outedated) - apache2-find-directives (renamed to apache2-find_directives) - apache2-init.logrotate (not needed) - apache2.firewalld (renamed to firewalld.apache2) - apache2.logrotate (renamed to logrotate.apache2) - apache2.ssl.firewalld (renamed to firewalld-ssl.apache2) - apache2.ssl.susefirewall (renamed to susefirewall.apache2) - apache2.susefirewall (renamed to susefirewall-ssl.apache2) - favicon.ico (not needed) - rc.apache2 (not needed) - robots.txt (not needed) - sysconf_addword (not needed, in aaa_base) - added patches fix PATCH: https://marc.info/?l=apache-httpd-users&m=147448312531134&w=2 + apache-test-application-xml-type.patch fix these variables from the test + apache-test-turn-off-variables-in-ssl-var-lookup.patch fix [fate317766] backport of an upstream commit + apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch fix [bnc#690734] TODO, to be upstreamed + apache2-LimitRequestFieldSize-limits-headers.patch fix apachectl is frontend for start_apache2, suse specific + apache2-apachectl.patch fix [bnc#210904] perhaps to be upstreamed + apache2-logresolve-tmp-security.patch fix layout of system dirs configuration, may be upstreamed + apache2-system-dirs-layout.patch - added sources + _multibuild + apache2-a2enflag + apache2-a2enmod + apache2-find_directives + apache2-gensslcert + apache2-mod_example.c + apache2-start_apache2 + firewalld-ssl.apache2 + firewalld.apache2 + logrotate.apache2 + susefirewall-ssl.apache2 + susefirewall.apache2 ==== apache2-prefork ==== - Require /usr/bin/which instead of which: allow usage of busybox variant for containers. - apache2 main package recommends apache2-utils - break some long lines in the spec as requested by review team - maybe make spec acceptable for factory bot - modified sources % _multibuild - buildrequire netcfg for tests - remove Requires(post): firewalld hard dependency (this is already handled by the %firewalld_reload macro) - package reworked trough [bsc#1178478] - modified patches % apache2-mod_proxy_uwsgi-fix-crash.patch (refreshed) - modified sources % apache2-loadmodule.conf % apache2-manual.conf % apache2-script-helpers % apache2@.service % sysconfig.apache2 - deleted patches - deprecated-scripts-arch.patch (not needed) - httpd-2.0.54-envvars.dif (not needed) - httpd-2.1.3alpha-layout.dif (renamed to apache2-system-dirs-layout.patch) - httpd-2.2.0-apxs-a2enmod.dif (not needed) - httpd-2.4.9-bnc690734.patch (renamed to apache2-LimitRequestFieldSize-limits-headers.patch) - httpd-2.4.x-fate317766-config-control-two-protocol-options.diff (renamed to apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch) - httpd-2.x.x-logresolve.patch (renamed to apache2-logresolve-tmp-security.patch) - httpd-apachectl.patch (renamed to apache2-apachectl.patch) - httpd-implicit-pointer-decl.patch (not needed) - httpd-visibility.patch (not needed) - deleted sources - SUSE-NOTICE (outdated) - a2enflag (renamed to apache2-a2enflag) - a2enmod (renamed to apache2-a2enmod) - apache-22-24-upgrade (outdated) - apache2-README (outdated) - apache2-README.QUICKSTART (outedated) - apache2-find-directives (renamed to apache2-find_directives) - apache2-init.logrotate (not needed) - apache2.firewalld (renamed to firewalld.apache2) - apache2.logrotate (renamed to logrotate.apache2) - apache2.ssl.firewalld (renamed to firewalld-ssl.apache2) - apache2.ssl.susefirewall (renamed to susefirewall.apache2) - apache2.susefirewall (renamed to susefirewall-ssl.apache2) - favicon.ico (not needed) - rc.apache2 (not needed) - robots.txt (not needed) - sysconf_addword (not needed, in aaa_base) - added patches fix PATCH: https://marc.info/?l=apache-httpd-users&m=147448312531134&w=2 + apache-test-application-xml-type.patch fix these variables from the test + apache-test-turn-off-variables-in-ssl-var-lookup.patch fix [fate317766] backport of an upstream commit + apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch fix [bnc#690734] TODO, to be upstreamed + apache2-LimitRequestFieldSize-limits-headers.patch fix apachectl is frontend for start_apache2, suse specific + apache2-apachectl.patch fix [bnc#210904] perhaps to be upstreamed + apache2-logresolve-tmp-security.patch fix layout of system dirs configuration, may be upstreamed + apache2-system-dirs-layout.patch - added sources + _multibuild + apache2-a2enflag + apache2-a2enmod + apache2-find_directives + apache2-gensslcert + apache2-mod_example.c + apache2-start_apache2 + firewalld-ssl.apache2 + firewalld.apache2 + logrotate.apache2 + susefirewall-ssl.apache2 + susefirewall.apache2 ==== apache2-utils ==== - Require /usr/bin/which instead of which: allow usage of busybox variant for containers. - apache2 main package recommends apache2-utils - break some long lines in the spec as requested by review team - maybe make spec acceptable for factory bot - modified sources % _multibuild - buildrequire netcfg for tests - remove Requires(post): firewalld hard dependency (this is already handled by the %firewalld_reload macro) - package reworked trough [bsc#1178478] - modified patches % apache2-mod_proxy_uwsgi-fix-crash.patch (refreshed) - modified sources % apache2-loadmodule.conf % apache2-manual.conf % apache2-script-helpers % apache2@.service % sysconfig.apache2 - deleted patches - deprecated-scripts-arch.patch (not needed) - httpd-2.0.54-envvars.dif (not needed) - httpd-2.1.3alpha-layout.dif (renamed to apache2-system-dirs-layout.patch) - httpd-2.2.0-apxs-a2enmod.dif (not needed) - httpd-2.4.9-bnc690734.patch (renamed to apache2-LimitRequestFieldSize-limits-headers.patch) - httpd-2.4.x-fate317766-config-control-two-protocol-options.diff (renamed to apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch) - httpd-2.x.x-logresolve.patch (renamed to apache2-logresolve-tmp-security.patch) - httpd-apachectl.patch (renamed to apache2-apachectl.patch) - httpd-implicit-pointer-decl.patch (not needed) - httpd-visibility.patch (not needed) - deleted sources - SUSE-NOTICE (outdated) - a2enflag (renamed to apache2-a2enflag) - a2enmod (renamed to apache2-a2enmod) - apache-22-24-upgrade (outdated) - apache2-README (outdated) - apache2-README.QUICKSTART (outedated) - apache2-find-directives (renamed to apache2-find_directives) - apache2-init.logrotate (not needed) - apache2.firewalld (renamed to firewalld.apache2) - apache2.logrotate (renamed to logrotate.apache2) - apache2.ssl.firewalld (renamed to firewalld-ssl.apache2) - apache2.ssl.susefirewall (renamed to susefirewall.apache2) - apache2.susefirewall (renamed to susefirewall-ssl.apache2) - favicon.ico (not needed) - rc.apache2 (not needed) - robots.txt (not needed) - sysconf_addword (not needed, in aaa_base) - added patches fix PATCH: https://marc.info/?l=apache-httpd-users&m=147448312531134&w=2 + apache-test-application-xml-type.patch fix these variables from the test + apache-test-turn-off-variables-in-ssl-var-lookup.patch fix [fate317766] backport of an upstream commit + apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch fix [bnc#690734] TODO, to be upstreamed + apache2-LimitRequestFieldSize-limits-headers.patch fix apachectl is frontend for start_apache2, suse specific + apache2-apachectl.patch fix [bnc#210904] perhaps to be upstreamed + apache2-logresolve-tmp-security.patch fix layout of system dirs configuration, may be upstreamed + apache2-system-dirs-layout.patch - added sources + _multibuild + apache2-a2enflag + apache2-a2enmod + apache2-find_directives + apache2-gensslcert + apache2-mod_example.c + apache2-start_apache2 + firewalld-ssl.apache2 + firewalld.apache2 + logrotate.apache2 + susefirewall-ssl.apache2 + susefirewall.apache2 ==== bind ==== Version update (9.16.7 -> 9.16.8) Subpackages: bind-chrootenv bind-doc bind-utils libbind9-1600 libirs1601 libisccc1600 libisccfg1601 python3-bind - Added special make instruction for the "Administrator Reference Manual" which is built using python3-Sphinx [bsc#1177983, bind.spec] - Removed "Before=nss-lookup.target" from named.service as that leads to a systemd ordering cycle [bsc#1177491, bsc#1178626, bsc#1177991, vendor-files.tar.bz2] - Upgrade to version 9.16.8 New Features: * Add a new rndc command, "rndc dnssec -rollover", which triggers a manual rollover for a specific key. * Add a new rndc command, "rndc dumpdb -expired", which dumps the cache database, including expired RRsets that are awaiting cleanup, to the dump-file for diagnostic purposes. Bug Fixes: * named reported an invalid memory size when running in an environment that did not properly report the number of available memory pages and/or the size of each memory page. * With multiple forwarders configured, named could fail the REQUIRE(msg->state == (-1)) assertion in lib/dns/message.c, causing it to crash. This has been fixed. * named erroneously performed continuous key rollovers for KASP policies that used algorithm Ed25519 or Ed448 due to a mismatch between created key size and expected key size. * Updating contents of an RPZ zone which contained names spelled using varying letter case could cause some processing rules in that RPZ zone to be erroneously ignored. Local changes: * Add /usr/lib64/named to the files and directories in bind-chrootenv.conf. This directory contains plugins loaded after the chroot(). [bsc#1177913,bsc#1178078,bsc#1177603,bind-chrootenv.conf] - Removed "dnssec-enable" from named.conf as it has been obsoleted. Added a comment for reference which should be removed in the future. - Added a comment to the "dnssec-validation" in named.conf with a reference to forwarders which do not return signed responses. - Replaced named's dependency on time-sync with a dependency on time-set in named.service. [bsc#1177790,bsc#1175894,bsc#1177915,vendor-files.tar.bz2] ==== busybox ==== Subpackages: busybox-static - cpio-long-opt.patch: add more long options to cpio for IBS/unrpm ==== cryptsetup ==== Subpackages: cryptsetup-lang libcryptsetup12 libcryptsetup12-32bit libcryptsetup12-hmac - SLE marker: implements jsc#SLE-5911, bsc#1165580, jsc#SLE-145149 ==== firewalld ==== Version update (0.9.0 -> 0.9.1) Subpackages: firewalld-lang python3-firewall - Remove the patch which enforces usage of iptables instead of nftables: * 0001-firewall-backend-Switch-default-backend-to-iptables.patch - Add firewalld zone for the docker0 interface. This is the workaround for lack of nftables support in docker. Without that additional zone, containers have no Internet connectivity. (rhbz#1817022) - Update to 0.9.1: * Bugfixes: * docs(firewall-cmd): clarify lockdown whitelist command paths * fix(dbus): getActivePolicies shouldn't return a policy if a zone is not active * fix(policy): zone interface/source changes should affect all using zone ==== fprintd ==== Version update (1.90.4 -> 1.90.6) Subpackages: fprintd-lang fprintd-pam fprintd-pam-32bit - Update to version 1.90.5 The 1.90.5 release was unusable due to a number of inter-related issues with the DBus interface and authorization. We also found a number of problems with possible security implications. Currently fprintd will do interactive authorization even if this was not requested using the correct DBus method call flag. All API users MUST be updated to set the flag as it will be enabled in the future! Highlights: * Fix fprintd DBus configuration * Change details of what requires authorization * Fix various race conditions in pam_fprintd * Permit interactive authorization from fprintd utilities * Do not allow deletion while another operation is ongoing - Drop patch: * 0001-tests-Fix-test-not-failing-on-error.patch - Update to version 1.90.4 The 1.90.4 release caused a major regression, as it included a USB hub in UDEV the autosupend rule list. Highlights: * Remove USB hub from udev autosupend rules * synaptics: Add PID 0x00c9 which is used in some HP laptops ==== gdb ==== - Backport from master [jsc#13656]: * gdb-powerpc-remove-512-bytes-region-limit-if-2nd-dawr-is-avaliable.patch - Require 8GB diskspace for x86_64. ==== gdk-pixbuf ==== Version update (2.42.0 -> 2.42.2) Subpackages: gdk-pixbuf-lang gdk-pixbuf-query-loaders gdk-pixbuf-query-loaders-32bit gdk-pixbuf-thumbnailer libgdk_pixbuf-2_0-0 libgdk_pixbuf-2_0-0-32bit typelib-1_0-GdkPixbuf-2_0 - Update to version 2.42.2: + Requre Meson 0.55.3. + Improve the PNG save operation. + Fix leak in the error path of the XPM loader. + Fix loading GIF without a GCE rendering color 0. + Fix invalid LZW codes in the GIF loader (CVE-2020-29385). ==== gnome-chess ==== Version update (3.38.0 -> 3.38.1) Subpackages: gnome-chess-lang - Update to version 3.38.1: + Try to make all chess engines easier on Easy and Normal difficulty. + Fix claim draw dialog appearing every turn after threefold repetition. + Fix bogus "computer player is confused" errors in several situations: - When the engine is stalemated. - When starting a new game while the game is paused, if the engine has moved during pause. - When resigning immediately before the engine moves. + Fix file chooser defaulting to /run when game is saved for a second time under flatpak. + Fix detection of stalled chess engine in untimed games. + Fix claim draw dialog appearing before a forced draw. + Fix ChessScene removing invalid GSource. ==== gpgme ==== Subpackages: libgpgme11 libgpgmepp6 python3-gpg - Use python-rpm-macros to provide python3X-gpg for all present python3 flavors -- gh#openSUSE/python-rpm-macros#66 ==== gpgmeqt ==== - Use python-rpm-macros to provide python3X-gpg for all present python3 flavors -- gh#openSUSE/python-rpm-macros#66 ==== gtk3 ==== Version update (3.24.23+118 -> 3.24.24) Subpackages: gtk3-data gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-tigrigna gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-lang gtk3-schema gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Update to version 3.24.24: + GtkColorChooser: Update the default color palette. + GtkFontChooser: Fix family-only mode to return regular style. + GtkTreeView: Don't set focus-on-click for header buttons. + Accessibility: - Implement scrollSubstringTo. - Add a11y support to GtkPlug/GtkSocket. + Printing: Allow the lpr backend to print pdf and ps files. + Theme: - Update gesture graphics. - Update HighContrast css. + Wayland: Support the primary-selection-unstable-v1 protocol. + X11: Fix a crash with parent-relative backgrounds. + Broadway: Set modifier state of scroll events. + Build: Fix pc file generation on NixOS. + Updated translations. ==== hplip ==== Version update (3.20.6 -> 3.20.9) Subpackages: hplip-hpijs hplip-sane - Update to 3.20.9 Add support for the following printers: * HP Color LaserJet Managed MFP E57540dn * HP Color LaserJet Managed Flow MFP E57540c * HP Color LaserJet Enterprise MFP M578dn * HP Color LaserJet Enterprise MFP M578f * HP Color LaserJet Enterprise Flow MFP M578c * HP Color LaserJet Enterprise Flow MFP M578z * HP Color LaserJet Managed E55040dw * HP Color LaserJet Managed E55040dn * HP Color LaserJet Enterprise M554dn * HP Color LaserJet Enterprise M555dn * HP Color LaserJet Enterprise M555x - Modified patches: * Use-lsb_release-fallback-code-if-import-distro-fails.patch * hp_ipp.h-add-missing-prototypes.patch * hplip-remove-imageprocessor.diff * hplip-udev-rules-in-usr.patch + refresh using source service * add_missing_includes_and_define_GNU_SOURCE.patch + refresh, drop inexisting file and add GNU_SOURCE definition and missing include in common/utils.c * hplip-misc-missing-includes-and-definitions.patch + rediff to changed context - New build dependency on libavahi-devel ==== hwdata ==== Version update (0.341 -> 0.342) - Update to version 0.342: + Updated pci, usb and vendor ids. ==== libical ==== - Add 0001-Fix-build-with-icu-68.1.patch: fix build with icu 68.1. ==== libical-glib ==== - Add 0001-Fix-build-with-icu-68.1.patch: fix build with icu 68.1. ==== libqb ==== Version update (2.0.1+20200729.416caf2 -> 2.0.2+20201203.def947e) - Update to version 2.0.2+20201203.def947e (v2.0.2): - ipcs : Decrease log level. (#426) - cov: Quieten some covscan warnings (#427) - doxygen2man: Fix a couple of covscan-detected errors (#425) - ipcs: Add missing qb_list_del when freeing server (#423) (gh#ClusterLabs/libqb#422) - ipc: add qb_ipcc_auth_get() API call (#418) - doxygen2man: Remove horrible hack (#420) (gh#ClusterLabs/libqb#419) - doxygen2man: Add support for @code blocks (#417) - man: Tidy man pages (#416) - doxygen2man: Add option to read copyright line from the header file (#415) (gh#ClusterLabs/libqb#414) ==== libstorage-ng ==== Version update (4.3.71 -> 4.3.72) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - merge gh#openSUSE/libstorage-ng#785 - handle missing partition device nodes for multipath (bsc#1175981) - 4.3.72 ==== libvirt ==== Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - spec: Enable mdevctl support in the nodedev driver for SLE15 SP3 jsc#SLE-15861, bsc#1179770 - apparmor: Allow lxc processes to receive signals from libvirt lxc: Set default security model in XML parser config 0d05d51b-apparmor-lxc-fix.patch, cf4e7e62-lxc-def-secmodel.patch bsc#1179735 ==== lvm2 ==== Subpackages: liblvm2cmd2_03 - prepare usrmerge (boo#1029961) ==== lvm2-device-mapper ==== Subpackages: device-mapper libdevmapper-event1_03 libdevmapper1_03 libdevmapper1_03-32bit - prepare usrmerge (boo#1029961) ==== memcached ==== Version update (1.6.7 -> 1.6.9) - update to 1.6.9: * arm64: Re-add arm crc32c hw acceleration for extstore * restart mode: expose memory_file path in stats settings * 'shutdown graceful' command for raising SIGUSR1 * Introduce NAPI ID based worker thread selection (see doc/napi_ids.txt) * item crawler hash table walk mode * bugfixes - Trim history lesson from description. - Do not suppress errors from useradd. - Reduce hard dependency on systemd. ==== mutt ==== Version update (2.0.2 -> 2.0.3) Subpackages: mutt-doc mutt-lang - mutt 2.0.3: * Fix pager dropped input on SigWinch flag handling * Fix REPLY_TO environment variable handling * Fix undefined NULL pointer arithmetic * Fix exact-address recording of last value * Fix exact-address handling when addr->personal is set ==== net-snmp ==== Subpackages: libsnmp30 perl-SNMP snmp-mibs - Fix the python subpackage generation gh#openSUSE/python-rpm-macros#79 - Support multiple python 3 flavors in the python subpackage gh#openSUSE/python-rpm-macros#66 ==== netcat-openbsd ==== - Add port-select-on-connect.patch: if -s is given but not -p do not select port at bind() but at connect() time. ==== nodejs14 ==== Subpackages: npm14 - openssl_binary_detection.patch: fixes unit tests on SLE12 ==== opensc ==== Version update (0.19.0 -> 0.21.0) - OpenSC 0.21.0: * CVE-2020-26571: stack-based buffer overflow in the gemsafe GPK smart card software driver (boo#1177380) * CVE-2020-26572: stack-based buffer overflow in the TCOS smart card software driver (boo#1177378) * CVE-2020-26570: heap-based buffer overflow in the Oberthur smart card software driver (boo#1177364) * CardOS 5.x support boo#1179291 * Support for OAEP encryption, make SHA256 default * New separate debug level for PIN commands * Fix handling of card/reader insertion/removal events in pcscd * Fixes of removed readers handling * Fix Firefox crash because of invalid pcsc context * PKCS#11: Return CKR_TOKEN_NOT_RECOGNIZED for not recognized cards * Propagate ignore_user_content to PKCS#11 layer not to confuse applications * Minidriver: Fix check of ATR length (2-to 33 characters inclusive) * pkcs11-tool: allow using SW tokens * opensc-explorer asn1 accepts offsets and decode records * opensc-explorer cat accepts records * OpenPGP: Add new ec curves supported by GNUK * First steps supporting OpenPGP 3.4 * OpenPGP: Add support for EC key import * Rutoken: Add ATR for Rutoken ECP SC NFC * Improve detection of various CardOS 5 configurations * DNIe: Add new DNIe CA structure for the secure channel * ePass2003: Improve ECC support * ePass2003: Fix erase sequence * IAS-ECC: Fix support for Idemia Cosmo cards * IAS-ECC: PIN padding settings are now used from PKCS#15 info when available * IAS-ECC: Added PIN-pad support for PIN unblock * New driver for Gemalto IDPrime (only some types) * eDo: New driver with initial support for Polish eID card (e-dowód, eDO) * MCRD: Remove unused and broken RSA EstEID support * TCOS: Add missing encryption certificates * PIV: Add ATR of DOD Yubikey * fixed PIV global pin bug * CAC1: Support changing PIN with CAC Alt tokens - includes changes from 0.20.0 * CVE-2019-6502: memory leak in libopensc (boo#1122756) * CVE-2019-15946: out-of-bounds access of an ASN.1 Octet string (boo#1149747) * CVE-2019-15945: out-of-bounds access of an ASN.1 Bitstring (boo#1149746) * CVE-2019-19479: incorrect read operation during parsing of a SETCOS file attribute (boo#1158256) * CVE-2019-19480: improper free operation in sc_pkcs15_decode_prkdf_entry (boo#1158307) * Support RSA-PSS signature mechanisms using RSA-RAW * Added memory locking for secrets * added support for terminal colors * PC/SC driver: Fixed error handling in case of changing or removing the card reader * rename md_read_only to read_only and use it for PKCS#11 and Minidriver * allow global use of ignore_private_certificate * PKCS#11: Implement write protection (CKF_WRITE_PROTECTED) based on the card profile * PKCS#11: Add C_WrapKey and C_UnwrapKey implementations * PKCS#11: Handle CKA_ALWAYS_AUTHENTICATE when creating key objects * PKCS#11: Truncate long PKCS#11 labels with ... * PKCS#11: Fixed recognition of a token when being unplugged and reinserted * Minidriver: Register for CardOS5 cards * Minidriver: Add support for RSA-PSS * tools: Harmonize the use of option -r/--reader * goid-tool: GoID personalization with fingerprint * openpgp-tool: replace the options -L/--key-length with -t/--key-type * openpgp-tool: add options -C/--card-info and -K/--key-info * opensc-explorer: add command pin_info, extend random * pkcs11-register: Auto-configuration of applications for use of OpenSC PKCS#11 * pkcd11-register: Autostart * opensc-tool: Show ATR also for cards not recognized by OpenSC * pkcs11-spy: parse CKM_AES_GCM, EC Derive parameters * pkcs11-spy: Add support for CKA_OTP_* and CKM_*_PSS values * pkcs11-tool: Support for signature verification via --verify * pkcs11-tool: Add object type secrkey for --type option * pkcs11-tool: Implement Secret Key write object * pkcs11-tool: Add GOSTR3410-2012 support * pkcs11-tool: Add support for testing CKM_RSA_PKCS_OAEP * pkcs11-tool: Add extractable option to key import * pkcs11-tool: list more key access flags when listing keys * pkcs11-tool: Add support for CKA_ALLOWED_MECHANISMS when creating new objects and listing keys * pkcs15-crypt: *Handle keys with user consent * New separate CAC1 driver using the old CAC specification (#1502) * CardOS: Add support for 4K RSA keys in CardOS 5 * CardOS: Fixed decryption with CardOS 5 * Enable CoolKey driver to handle 2048-bit keys * EstEID: add support for a minimalistic, small and fast card profile based on IAS-ECC issued since December 2018 * GIDS Decipher fix (#1881) * GIDS: Allow RSA 4K support * MICARDO: Remove long expired EstEID 1.0/1.1 card support * MyEID: Add support for unwrapping a secret key with an RSA key or secret key * MyEID Add support for wrapping a secret key with a secret key * Support for MyEID 4K RSA * Support for OsEID * Gemalto GemSafe: add new PTeID ATRs, add support for 4K RSA keys * OpenPGP Card v3 ECC support * Add Rutoken ECP SC * Add Rutoken Lite * Add SmartCard-HSM 4K ATR * Add missing secp384r1 curve parameter * Stacros: Fix decipher with 2.3 * Stacros: Add ATR for 2nd gen. eGK * Stacros: Add new ATR for 3.5 * Stacros: Detect and allow Globalplatform PIN encoding * Fix TCOS IDKey support * TCOS: add encryption certificate for IDKey * Infocamere, Postecert, Cnipa: Remove profiles * Remove incomplete acos5 driver - drop patches now upstream: * opensc-0.19.0-piv_card_matching.patch * opensc-0.19.0-redundant_logging.patch * opensc-0.19.0-rsa-pss.patch ==== php7 ==== Subpackages: apache2-mod_php7 php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter - do not add mod_php to httpd.conf during %install (better fix for new apache2 from Apache development repo) + php-install-mod_php.patch - do not build php-cgi when not needed - only build extensions in cli ==== plymouth ==== Version update (0.9.5+git20200921+20778f2 -> 0.9.5+git20201026+53c83cc) Subpackages: libply-boot-client5 libply-splash-core5 libply-splash-graphics5 libply5 plymouth-dracut plymouth-plugin-label plymouth-plugin-two-step plymouth-scripts plymouth-theme-bgrt plymouth-theme-spinner - Update to version: 0.9.5+git20201026: Don't wait forever for a ping reply. ==== poppler ==== Version update (20.10.0 -> 20.12.0) Subpackages: libpoppler-cpp0 libpoppler-glib8 poppler-tools - Update to 20.12.0: + core: - Draw better circles for circle annotations - Fix annotation line width if no appearance stream or style are given - Tweak rendering of highlight annotations - Fix border rendering of some annotations - Fix rendering of some files. Issue #976 Issue #567 - PSOutputDev: provide options to set the rasterization color space and ICC profile - PSOutputDev: for splashModeCMYK8 and language level >=2 activate overprint emulation - PSOutputDev: use the DeviceN8 bitmap for rasterization with CMYK-output + overprint - Use the font name without subset tag when querying for a system font - Splash: Fix wrong x adjustment during clipping - Splash: Fix blitImage in uncolored tiling patterns - timeToDateString: We forgot the ' after the minutes - Move psLevel to PSOutputDev creation - Fix several issues in broken files + utils: - pdftops: provide options to set the rasterization color space and ICC profile - pdftops: for splashModeCMYK8 and language level >=2 activate overprint emulation ==== poppler-qt5 ==== Version update (20.10.0 -> 20.12.0) - Update to 20.12.0: + core: - Draw better circles for circle annotations - Fix annotation line width if no appearance stream or style are given - Tweak rendering of highlight annotations - Fix border rendering of some annotations - Fix rendering of some files. Issue #976 Issue #567 - PSOutputDev: provide options to set the rasterization color space and ICC profile - PSOutputDev: for splashModeCMYK8 and language level >=2 activate overprint emulation - PSOutputDev: use the DeviceN8 bitmap for rasterization with CMYK-output + overprint - Use the font name without subset tag when querying for a system font - Splash: Fix wrong x adjustment during clipping - Splash: Fix blitImage in uncolored tiling patterns - timeToDateString: We forgot the ' after the minutes - Move psLevel to PSOutputDev creation - Fix several issues in broken files + utils: - pdftops: provide options to set the rasterization color space and ICC profile - pdftops: for splashModeCMYK8 and language level >=2 activate overprint emulation ==== procps ==== Subpackages: libprocps8 - prepare usrmerge (boo#1029961) ==== psmisc ==== Subpackages: psmisc-lang - prepare usrmerge (boo#1029961) ==== python-dkimpy ==== Version update (1.0.3 -> 1.0.5) - update to 1.0.5 - Update dnsplug for DNS Python (dns) 2.0 compatibility (LP: #1888583) - Fix @param srv_id typos (LP: #1890532) - Correct dkim.verify processing to avoid errors when verifying messages with no DKIM signatures ==== rubygem-net-ssh ==== Version update (6.1.0 -> 6.2.0.rc1) New upstream release 6.2.0 rc1 * rsa-sha2-512, rsa-sha2-256 host_key algs [#771] * JRuby aes*-ctr suppport [#767] ==== smp_utils ==== Subpackages: libsmputils1-1 - Add missing ldconfig calls for libsmputils1-1. ==== subversion ==== Subpackages: libsvn_auth_gnome_keyring-1-0 libsvn_auth_kwallet-1-0 subversion-bash-completion subversion-perl subversion-server subversion-tools - use system apache rpm macros ==== sudo ==== Version update (1.9.3p1 -> 1.9.4) Subpackages: sudo-plugin-python - Update to 1.9.4 * The sudoers parser will now detect when an upper-case reserved word is used when declaring an alias. Now instead of "syntax error, unexpected CHROOT, expecting ALIAS" the message will be "syntax error, reserved word CHROOT used as an alias name". Bug #941. * Better handling of sudoers files without a final newline. The parser now adds a newline at end-of-file automatically which removes the need for special cases in the parser. * Fixed a regression introduced in sudo 1.9.1 in the sssd back-end where an uninitialized pointer could be freed on an error path. GitHub issue #67. * The core logging code is now shared between sudo_logsrvd and the sudoers plugin. * JSON log entries sent to syslog now use "minimal" JSON which skips all non-essential whitespace. * The sudoers plugin can now produce JSON-formatted logs. The "log_format" sudoers option can be used to select sudo or json format logs. The default is sudo format logs. * The sudoers plugin and visudo now display the column number in syntax error messages in addition to the line number. Bug #841. * If I/O logging is not enabled but "log_servers" is set, the sudoers plugin will now log accept events to sudo_logsrvd. Previously, the accept event was only sent when I/O logging was enabled. The sudoers plugin now sends reject and alert events too. * The sudo logsrv protocol has been extended to allow an AlertMessage to contain an optional array of InfoMessage, as AcceptMessage and RejectMessage already do. * Fixed a bug in sudo_logsrvd where receipt of SIGHUP would result in duplicate entries in the debug log when debugging was enabled. * The visudo utility now supports EDITOR environment variables that use single or double quotes in the command arguments. Bug #942. * The PAM session modules now run when sudo is set-user-ID root, which allows a module to determine the original user-ID. Bug #944. * Fixed a regression introduced in sudo 1.8.24 in the LDAP back-end where sudoNotBefore and sudoNotAfter were applied even when the SUDOERS_TIMED setting was not present in ldap.conf. Bug #945. * Sudo packages for macOS 11 now contain universal binaries that support both Intel and Apple Silicon CPUs. * For sudo_logsrvd, an empty value for the "pid_file" setting in sudo_logsrvd.conf will now disable the process ID file. - Remove sudo-1.9.3p1-pam_xauth.patch (upstreamed) ==== sysconfig ==== Subpackages: sysconfig-netconfig - Also support service(network) provides ==== sysvinit ==== Version update (2.97 -> 2.98) - Update to sysvinit 2.98: * Fixed time parsing in shutdown when there is a + in front of a 0 time offset. Commands with a postiive time offset (+1) would work but +0 fails. This has been corrected by Arkadiusz Miskiewicz. ==== telepathy-glib ==== Subpackages: libtelepathy-glib0 typelib-1_0-TelepathyGlib-0_12 - Drop python-xml BuildRequires: the installation is using python3. ==== telepathy-logger ==== Subpackages: libtelepathy-logger3 typelib-1_0-TelepathyLogger-0_2 - Build with python3 instead of python2: + Add 1.diff: tools: Fix the build with Python 3. + Drop python2-devel and python-xml BuildRequires. - Drop empty post/postun scriptlets that were calling glib2_gsettings_schema_post/postun: macros are now empty placeholder and the funcionality handled by file triggers. ==== tigervnc ==== Subpackages: libXvnc1 xorg-x11-Xvnc xorg-x11-Xvnc-module - x11vnc wrapper script: converted to python3 (boo#1179592) ==== vim ==== Version update (8.2.2039 -> 8.2.2105) Subpackages: gvim vim-data vim-data-common - Updated to version 8.2.2105, fixes the following problems * Viminfo is not written when creating a new file. * Terminal buffer disappears even when 'bufhidden' is "hide". (Sergey Vlasov) * Haskell filetype not optimally recognized. * Build failure with +profile but without +reltime. * GTK3: white border around text stands out. * Highlighting a character too much with incsearch. * Some test failures don't give a clear error. * Amiga: FEAT_ARP defined when it should not. * Amiga: obsolete code. * Amiga: obsolete function. * Search test contains unneeded sleeps. * Vim9: crash when aborting a user function call. * Vim9: "edit +4 fname" gives an error. (Naruhiko Nishino) * Vim9: lamba doesn't accept argument types. * Configure fails when building with the "implicit-function-declaration" error enabled, specifically on Mac. * Getting the selection may trigger TextYankPost autocmd. * Using mkview/loadview changes the jumplist. * Check for features implemented with "if". * Vim9: E1030 error when using empty string for term_sendkeys(). * <Cmd> does not handle CTRL-V. * Vim9: only one level of indexing supported. * terminal: cursor is on while redrawing, causing flicker. * Using map() and filter() on a range() is inefficient. * Vim9: assignment with += doesn't work. * Cursor position in popup terminal is wrong. * Transparent syntax item uses start/end of containing region. * The quickfix window is not updated after setqflist(). * Can't get the exit value in VimLeave or VimLeavePre autocommands. * Vim9: list assign doesn't except empty remainder list. * Vim9: list assign not well tested. * Vim9: for with unpack only works for local variables. * Vim9: using :normal from Vim9 script can't handle range. * Error for const argument to mapnew(). * Build failure with small features. * Illegal memory access when using :print on invalid text. (Dhiraj Mishra) * Vim9: cannot put a linebreak before or after "in" of ":for". * Vim9: no proper error message for using s:var in for loop. * Vim9: cannot handle a linebreak after "=" in assignment. * Vim9: can still use the depricated #{} dict syntax. * Vim9: crash when using ":silent!" and getting member fails. * CTRL-V U doesn't work to enter a Unicode character when modifyOtherKeys is effective. (Ken Takata) * Qt translation file is recognized as typescript. * Libvterm tests are only run on Linux. * Vim9: memory leak when statement is truncated. * Vim9: script test sometimes fails. * Vim9: dict does not accept a key in quotes. * Vim9: unpredictable errors for script tests. * Vim9: script test sometimes fails. * When an expression fails getting the next command may be wrong. * Vim9: crash when failed dict member is followed by concatenation. * Vim9: command modifiers not restored after assignment. * Vim9: using :silent! when calling a function prevents abortng that function. * Vim9: function argument of sort() and map() not tested. * Vim9: some checks are not tested. * Insufficient testing for function range and dict. * Vim9: memory leak when literal dict has an error and when an expression is not complete. * Vim9: not all error messages tested. * Vim9: unreachable code. * Build problem with Ruby 2.7. * Sound test is a bit flaky. ==== vlan ==== - prepare usrmerge (boo#1029961) ==== webkit2gtk3 ==== Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Add old-wayland-scanner.patch for 15.0/15.1: support older wayland-scanner. Also renumber patches to group 15.0/15.1-specific patches together. - Have the libwebkit2gtk package require libjavascriptcoregtk of the same version (boo#1171531). ==== xfsdump ==== - prepare usrmerge (boo#1029961) ==== xorg-x11-server ==== Version update (1.20.9 -> 1.20.10) Subpackages: xorg-x11-server-Xvfb xorg-x11-server-extra xorg-x11-server-sdk xorg-x11-server-wayland - Update to version 1.20.10: * Check SetMap request length carefully. * Fix XkbSetDeviceInfo() and SetDeviceIndicators() heap overflows * present/wnmd: Translate update region to screen space * modesetting: keep going if a modeset fails on EnterVT * modesetting: check the kms state on EnterVT * configure: Build hashtable for Xres and glvnd * xwayland: Create an xwl_window for toplevel only * xwayland: non-rootless requires the wl_shell protocol * glamor: Update pixmap's devKind when making it exportable * os: Fix instruction pointer written in xorg_backtrace * present/wnmd: Execute copies at target_msc-1 already * present/wnmd: Move up present_wnmd_queue_vblank * present: Add present_vblank::exec_msc field * present: Move flip target_msc adjustment out of present_vblank_create * xwayland: Remove pending stream reference when freeing * xwayland: use drmGetNodeTypeFromFd for checking if a node is a render one * xwayland: Do not discard frame callbacks on allow commits * present/wnmd: Remove dead check from present_wnmd_check_flip * xwayland: Check window pixmap in xwl_present_check_flip2 * present/wnmd: Can't use page flipping for windows clipped by children * xfree86: Take second reference for SavedCursor in xf86CursorSetCursor * glamor: Fix glamor_poly_fill_rect_gl xRectangle::width/height handling * include: Increase the number of max. input devices to 256. * Revert "linux: Make platform device probe less fragile" * Revert "linux: Fix platform device PCI detection for complex bus topologies" * Revert "linux: Fix platform device probe for DT-based PCI" - Remove included pachtes * U_xfree86_take_second_ref_for_xcursor.patch * U_Revert-linux-Fix-platform-device-probe-for-DT-based-.patch * U_Revert-linux-Fix-platform-device-PCI-detection-for-c.patch * U_Revert-linux-Make-platform-device-probe-less-fragile.patch * U_Fix-XkbSetDeviceInfo-and-SetDeviceIndicators-heap-ov.patch * U_Check-SetMap-request-length-carefully.patch - remove unneeded python2 script 'fdi2iclass.py' from xorg-x11-server-sources subpackage (boo#1179591) ==== yast2-firstboot ==== Version update (4.3.8 -> 4.3.9) - Fix: Starting YaST2 Control Center if the flag SHOW_Y2CC_CHECKBOX has been set in /etc/sysconfig/firstboot and the user has selected it while the firstboot installation workflow (bsc#1178834). - 4.3.9 ==== yast2-installation ==== Version update (4.3.22 -> 4.3.24) - Do not cleanup the libzypp cache when the system has low memory, incomplete cache confuses libzypp later (bsc#1179415) - 4.3.24 - Starting YAST2 Control Center if it has been set while an yast2-firstboot installation workflow (bsc#1178834). - 4.3.23 ==== yast2-trans ==== Version update (84.87.20201130.b140fdb5f7 -> 84.87.20201205.6b65f14502) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20201205.6b65f14502: * Translated using Weblate (Dutch) * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (Czech) * Translated using Weblate (Japanese) * Translated using Weblate (Catalan) * New POT for text domain 'update'. * New POT for text domain 'cluster'. * Translated using Weblate (Slovak) * Translated using Weblate (Czech) * Translated using Weblate (Slovak) * Translated using Weblate (Japanese) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * New POT for text domain 'storage'. * Translated using Weblate (Portuguese) * New POT for text domain 'users'. * Translated using Weblate (Czech) * Translated using Weblate (Slovak) * Translated using Weblate (Japanese) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * New POT for text domain 'control'.

1 0

nvidia-uvm module
by Jogchum Reitsma 10 Dec '20

10 Dec '20

Hi, I was wondering, is a build of the nvida-uvm module for kernel >= 5.9 on the horizon? For some projects I really need CUDA support, and for that this module is needed, I understand. regards, Jogchum

11 25

openSUSE Release Engineering Meeting 09.12.2020
by Lubos Kocman 10 Dec '20

10 Dec '20

All meeting minutes can be found here: https://etherpad.opensuse.org/p/ReleaseEngineering-meeting ## Participants rbrown,guillaumeg,skriesch,dleuenberger, ddemaio, michel, lkocman,maxlin, wengel !!! Please be aware that this meeting is hosted on https://meet.opensuse.org/ReleaseEngineeringMeeting ## Leap Lubos's Christmas break starts on 17th Dec. Demo of SR mirroring today after the openSUSE Rel-eng meeting. First Leap 15.3 build which is based on SLE 15 SP3 binaries. Adrian: remarks about our speed-up of build (temp. disabling of backports). * Leap 15.2 iso respin still pending https://github.com/openSUSE/software-o-o/pull/908 Public Arm survey results https://en.opensuse.org/Portal:15.3/Surveys/ARM_Usecases Meeting minutes for the review: https://etherpad.opensuse.org/p/ReleaseEngineering-20201202-arm The very first build of Leap 15.3 based on SLE 15 SP3 binaries https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.3&bui… ## openSUSE Tumbleweed * RPM 4.16 in Staging:A, together with brp-check-suse. * openblas: https://bugzilla.opensuse.org/show_bug.cgi?id=1179764 * postgresql: https://bugzilla.opensuse.org/show_bug.cgi?id=1179765 (fixes submitted) * Mozilla (FF and TB): https://bugzilla.opensuse.org/show_bug.cgi?id=1179766 The rest in Staging:A seems to settle * Ruby 3.0 scheduled for Dec 25; YaST is not ready for it, the rest seems ok * Active work won rpmlint 2.0 is ongoing; integration work is messy, due to its huge dep chain * DNS on openQA/ariel is stil set to GOOGLE ## Richard (Kubic/TW MicroOS) MicroOS is moving to selinux by default (but not Kubic, yet). Please join the selinux(a)lists.opensuse.org mailinglist for all discussions related to improving SELinux on openSUSE. SELinux will be configured automatically via an RPM package while we wait for SELinux support to be added in YaST. Kubic's 1.19 certification got approved, now kubernetes 1.20 is released so packaging that All MicroOS/Kubic appliance/vm/pi images will now show systemd service status during boot, so users can be sure things are still happening during long running service starts (eg. complex combustion scripts) MicroOS tasks being tracked on a public github project tracker - https://github.com/orgs/kubic-project/projects/4 . Everyone should please feel free to leave suggestions or (even better) work on the issues tracked there. ## Max * Working on Backports project for 15.3/15 SP3 * Understand rpmlint-backports from Wolfgang * Adjusted groups.yml, waiting for a new product build, new maintenance check-in or SP3 check-in triggered product rebuild always... * Finally we got a new Leap build! lkocman: kde4 drop by Antonio L., https://github.com/openSUSE/release-notes-openSUSE/pull/102 maxlin: ^ the goal should be to remove libqt4 btw ## Guillaume - Arm Tumbleweed: * is rolling no blocker. * BTI bug with statically linked binaries has been identified and will be fixed: https://bugzilla.suse.com/show_bug.cgi?id=1179450 Leap 15.3 ARM: * New openQA snapshot today, aarch64 setup looks good. * Priority of backports:15.3 increased (will result into more workers) * Armv7: So far survey results are showing that we have to keep ARMv7 on openSUSE Leap 15.3 https://survey.opensuse.org/index.php/125963 (See Leap section). Lubos to schedule meeting with Adrian, Dirk, Guillaume on next steps. RPi 400 is still a WIP. We already have patches for u-boot, waiting for internal review: https://github.com/openSUSE/u-boot/pull/14 WSL: WIP to have WSL on aarch64 onhttps://build.opensuse.org/project/show/home:Guillaume_G:WSL The goal is to haveWSL-DistroLauncher package built for aarch64. Lubos: no update either Will be done today: On this topic I have an agreement with WSL team to publish a blog post about how to get this working manually via wsl.exe import of aarch64 binary archive from OBS. Fedora recently published something like this, but for x86. WSL information: https://en.opensuse.org/openSUSE:WSL https://en.opensuse.org/WSL/Building_in_OBS ## Michel ppc64le, no updates Lubos requested additional HW resources for openqa, Hector (our Power TPM) is on it. Adrian: there is support for ppc VM in the script, but we need KVM for building images. Lubos to check with Hector. ## Sarah - s390x * IBM requires an additional approval by SUSE, because openSUSE is the open-source project of SUSE lkocman: anything that I could help with? * Today is a meeting about these topics and the topic NDA because of these dependencies. * Sarah can do this job official, if all is approved from both sides. She had to create an additional openSUSE account for work (skriesch). * We can use additional hardware capacity for tests in the LinuxONE Community Cloud after the agreement of both sides. Dimstar: Sarah (user skriesch) should be the same permissions for s390x as Michel has on ppc64le. The isolation of s390x resources SUSE/openSUSE was a problem in the past. ## Doug * Survey questions updated - https://etherpad.opensuse.org/p/meeting-poll-08-12 * Will be transitioning shop.o.o from spreadshirt to freewear.org * matomo (former piwik) is down. (heroes are looking at it) * opportunities, differentiation with announcement of centos change ## Dirk Not present Finished rewording of Distribution Architecture Policy and posted update (was: Tier1 Policy): https://en.opensuse.org/openSUSE:OpenSUSE_Distribution_Architectures_Policy Various Tumbleweed package updates: Reviewed https://github.com/openSUSE/software-o-o/pull/908 ## Gerald Not present ## Wolfgang (Package Hub) Submitted requests to update dependencies in SLE, especially for KDE Plasma 5 packages that needs updated dependencies Looking into unresolvables on other archs than x86_64 (e.g. s390x) Still problem that target build openSUSE:Backports:SLE-15-SP3 isn't included in many submit requests so we rebuild it for that target to see build results Adrian: user creates an SR which targets Backports. Request would first create a branch, and then would make request. We can't enable it without communication. Adrian thinks it might only work in the :Update setup. Wolfgang: people are currently confused, so communication is crucial. Now building for SLE-15-SP3 217 failed packages that are conflicting with packages from SLE, mainly Workstation Extension ( Lubos: all new package reuests for openSUSE Leap 15.3 have to be re- done for backports. Could we use new default targe (Backports)? Adrian: we shouldn't override it by default. Max: Is it possible to do all new package requests against Backports by default? Adrian: yes but we have to think it through. Adrian: we could perhaps redirect sr by default. And admins could instanciate it in case that we want to keep it in Leap project. ## Adrian - CtLG All that's needed should be done, including publishing. Max: we can enable publishing in :ToTest Will work on Leap 15.3 publishing these days. Afterwards Jump 15.2 project will be removed everywhere. lkocman: Any news from Marco on SR mirroring? Adrian/Max: SR redirection is already in place, should work for frozen projects as well. We need to see if there is any gap in between freezing Backports and Leap. ## Antonio Mainly working on a couple of things related to Leap 15.2/15.3: * bitmap/Type1 fonts and gtk issue (https://bugzilla.suse.com/show_bug.cgi?id=1174895 * Pipewire dependencies on the Firefox package (https://bugzilla.suse.com/show_bug.cgi?id=1178809 Dominique: Can you use boolean (Requires) dependencies? Note: we won't be able to do a version update of KDE Plasma on 15.3 due to only having Qt 5.12 while the next Plasma LTS release will require Qt 5.15 lkocman: this goes hand in hand with the "conservative" SLE 15 SP3 release. So okay with me. Max: KDE4, is currently build failing in Backports for x86_64. Do we want to put resources into fixing it? Antonio: What exactly does KDE4 mean? Max: Everything Antonio: we do not want to support that. Max: do we want to follow TW and drop entire KDE4? Antonio: I'll have a look to see if some big fix could help, otherwise I'll discuss it with Fabian. lkocman: Ask on factory and then maybe drop it

2 1

(no subject)
by kiyomi.kakitsubata＠gmail.com 10 Dec '20

10 Dec '20

1 0

New Tumbleweed snapshot 20201207 released!
by Dominique Leuenberger 09 Dec '20

09 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: bash gcc10 (10.2.1+git958 -> 10.2.1+git1030) gcin gmp (6.2.0 -> 6.2.1) grep gstreamer-devtools (1.18.0 -> 1.18.1) plymouth === Details === ==== bash ==== Subpackages: bash-doc bash-lang - remove obsolete info macros - prepare usrmerge (boo#1029961) ==== gcc10 ==== Version update (10.2.1+git958 -> 10.2.1+git1030) Subpackages: cpp10 gcc10-info gcc10-locale libasan6 libatomic1 libgcc_s1 libgcc_s1-32bit libgfortran5 libgomp1 libitm1 liblsan0 libobjc4 libquadmath0 libstdc++6 libstdc++6-32bit libstdc++6-devel-gcc10 libstdc++6-locale libstdc++6-pp-gcc10 libstdc++6-pp-gcc10-32bit libtsan0 libubsan1 - Update to gcc-10 branch head (e563687cf9d3d1278f45aaebd), git1030 * Includes fix for firefox build [gcc#97918] - Do not specify alternate offload compiler location at configure time. - Update README.First-for.SuSE.packagers - Install offload compilers for gcc10-testresults build - Enable fortran for offload compilers. ==== gcin ==== Subpackages: gcin-gtk2 gcin-gtk3 gcin-qt5 libgcin-im-client1 - Do not build the qt4 subpackage for Leap 15.3 or newer (boo#1179613). ==== gmp ==== Version update (6.2.0 -> 6.2.1) Subpackages: libgmp10 libgmp10-32bit - GMP 6.2.1: * A possible overflow of type int is avoided for mpz_cmp on huge operands * Overflows are more carefully detected and reported for mpz_pow_ui * Fix a bug in longlong.h for aarch64 sub_ddmmss * mini-gmp: mpz_out_str and mpq_out_str now correctly handle out of range bases * C90 compliance * Support for more processors ==== grep ==== Subpackages: grep-lang - remove deprecated texinfo macros - silence egrep,fgrep packaging warnings ==== gstreamer-devtools ==== Version update (1.18.0 -> 1.18.1) Subpackages: libgstvalidate-1_0-0 typelib-1_0-GstValidate-1_0 - Update to 1.18.1: + Highlighted bugfixes in 1.18.1 - important security fixes - bug fixes and memory leak fixes - various stability and reliability improvements ==== plymouth ==== Subpackages: libply-boot-client5 libply-splash-core5 libply-splash-graphics5 libply5 plymouth-dracut plymouth-plugin-label plymouth-plugin-two-step plymouth-scripts plymouth-theme-bgrt plymouth-theme-spinner - Add plymouth-disable-fedora-logo.patch: Disable the image link which point to the fedora logo. this modification will also avoid the failure report from build checker. - Add plymouth-ignore-serial-console.patch: Don't output in serial console for openQA need to take serial in the test, and yast-installation prgram has a feature to install system through it (bnc#1051692 bnc#1164123 bnc#1170906). - Update plymouth.spec: prepare usrmerge (boo#1029961) - Update to version: 0.9.5+git20200921+20778f2: * boot-server: Handle client disconnecting while trigger pending. * boot-server: Ref count the connections. * drm: Honor modes selected by the user through video= kernel cmdline argument. * use resolution of higher res monitor for window size. * autogoo: use /proc/self/fd/0 instead of /dev/stdin. * main: Don't bail out of load_settings if "Theme" is missing. * main: switch log file when switching mode. * main: fix mode changing before splash is shown. * two-step: Center message text within labels if labels are centered. * drm/kms probe speedups. * drm: Do not unnecessarily get output info twice. * ply-device-manager: Only consume one udev event at a time. * two-step: Do not jump to end-animation on halt/reboot if it is disabled. * two-step: Add UseEndAnimation setting. * script: add Image.Crop(x, y, width, height). * ply-throbber: Do not redraw when we need to stop throbbing on free. * ply-keymap-icon: Do not draw on free. * ply-capslock-icon: Do not draw on free. * script: add missing unref() for system update func. * themes: Drop UseFirmwareBackground=true from spinner/bgrt firmware-upgrade settings. * Fix SetSystemUpdateFunction. * event-loop: Remove ply_trace calls around the disconnect handler. * ply-terminal-session: Not use grantpt when the system shut down. to avoid sytem hung up. * build-goo: Remove vestigial remnants of old GDM integration code. - Drop plymouth-avoid-umount-hanging-shutdown.patch: because has been merged to upstream. - Remove gnu-unifont-bitmap-fonts runtime dependency, it is not used anywhere. - Remove unused kernel-headers and module-init-tools build deps. - Make plymouth-scripts noarch, correct its runtime dependencies. - Clean up spec file. - Add plymouth-no-longer-modify-conf-to-drop-isopensuse-macro.patch: plymouth will use plymouthd.defaults instead of plymouth.conf and packge plymouthd.defaults in a seperet RPM. this can avoid change SUSE or openSUSE branding section with is_opensuse macro in the config file. means this modification can close the leaps gap (jsc#SLE-11637). - Update plymouth.spec: Dropping gdm transition because it has alreay deprecated by upstream. Removing git build dependency. - Drop plymouth-only_use_fb_for_cirrus_bochs.patch: openSUSE user are using emu-5.0.0 on MacOS-X with HVF acceleration, the Plymouth theme with script module fails to go to graphic mode with this patch(boo#1172028). - Avoid inconsistencies in library package names causing unresolvable dependencies, replace all soversion occurences with a macro. - Add patch plymouth-avoid-umount-hanging-shutdown.patch: To avoid grantpt() call nsslookup, it will hanging system unmount /var during shutdown period(bnc#1105688, bnc#1129386, bnc#1134660, bnc#1166601, bnc#1171971). - Update to version 0.9.5+git20190908+3abfab2: * two-step: Deal with buggy firmware which does not pre-rotate the bgrt image * configure: bump so name * Internationalization: Add zh_HK and zh_TW translations. * add delay time to 8 seconds to fit AMD graphic card. - Update plymouth.spec: Disable upstart-monitor compile because it only used in Ubuntu/Debian. - Update plymouth.spec: Use bcond_with for X11 renderer, cleanup syntax. - Update plymouth.spec: obsolete plymouth render plugin for Xwindows, Since this plugin will not be used in the production environment, and this modify will highly decrease the compilation of build requirements. - Update to version 0.9.4+git20190612+9359382: * two-step: Add support for firmware-splashes with rotation status bits set * Regenerate plymouth.pot to add the strings for the new firmware-upgrade mode. - Add dependency to dracut for plymouth-scripts(bnc#1138248). - BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to shortcut the build queues by allowing usage of systemd-mini - Change default openSUSE theme to bgrt - Update to version 0.9.4+git20190325+b9f2aac: * themes: Update spinner and bgrt background settings * Translations: Sync translations with zanata - Fix theme-bgrt dependencies (based on plugin-two-step with images from theme-spinner) - Update to version 0.9.4+git20181219.c8f1256: * ply-pixel-buffer: Fix right and bottom edge rendering of scaled buffers. * Add support for translating the user visible strings in some themes * Prefix Title and Subtitle theme config keywords with an underscore * Add new reboot and system-upgrade modes * main: Remove private ply_mode_t * two-step: Make ProgressBarShowPercentComplete a per mode setting * plymouthd.defaults: Change default ShowDelay to 0 * ply-boot-splash: Do not add ply_boot_splash_update_progress timeout multiple times * logging: Minor log-message fixes. Improve logging format. * themes: Update spinner and bgrt theme offline updates mode * two-step: Add a per mode setting to suppress messages. Add progress-bar support. Add MessageBelowAnimation option. Add per mode settings. Drop background_is_bgrt view_t member * ply-progress-bar: Allow caller to specify the widgets width and height. Allow choosing fore- and back-ground color. Redraw on percentage update. * boot-server: fix type confusion when allocating connection object * ply-device-manager: Handle change events for monitor hotplugging. Consume all events in one go. * drm: Stop limiting preferred-mode picking to UEFI systems. Reset mode on display-port connected outputs with a bad link-status. Implement handle_change_event. Ensure heads are mapped before flushing them. Allow calling create_heads_for_active_connectors multiple times. Allow calling ply_renderer_head_add_connector with existing connector_id. Limit backend->resources lifetime to within query_device. Store and keep all the outputs in the backend. Add get_output_info helper function Stop storing a pointer to drmModeConnector in ply_output_t Stop keeing a drmModeConnector instance around. Refactor ply_renderer_head_add_connector and ply_renderer_head_new - Rebase 0002-Install-label-ft-plugin-into-initrd-if-available.patch - Update to version 0.9.4+git20181219.c8f1256: * two-step: Use plymouth_strtod Use the locale agnostic plymouth_strtod helper which always uses a "." as decimal seperator. This fixes the various Alignment options not working with some locales. - Update to version 0.9.4+git20181209.f7d5bb1: * ply-keyboard: Fix compiler warning * When a renderer goes away on a udev remove event, free keyboards associated with the renderer, before freeing the renderer. * device-manager: free keyboards when deactivating a renderer * keyboard: add helper to get the keyboard's renderer, if applicable. - Update to version 0.9.4+git20181204.0cd0613: * drm: Pick a controller for unconfigured connectors * drm: Drop crtcs for clones for which we've picked different modes * drm: More connector enumeration refactoring * drm: Store tiled and rotation in ply_output_t * drm: Refactor create_heads_for_active_connectors * drm: Directly store the mode instead of the mode_index * drm: Drop unused encoder_id - Update to version 0.9.4+git20181129.a7ec3e6: * Add new BGRT theme, using the firmware boot splash as background * two-step: bgrt: Deal with quirky firmwares, Add ACPI BGRT extension support, Speed up background-tile drawing on HiDPI screens, Use a pixel-buffer instead of an image for the view's background * ply-pixel-buffer: Add ply_pixel_buffer_rotate_upright helper, Add ply_pixel_buffer_get/set_device_rotation helpers, Fix marking buffers as opaque when doing a solid fill, Fix fill_with_buffer fastpath when device_scale != 1. - Update to version 0.9.4+git20181122.aaa140b: Add a separator between different boot logs Fix race causing undesired creation of non-gfx devs Fix animation not starting on later added heads - Update to version 0.9.4+git20181111.118c5ca: Modify systemd-units: Add "ConditionVirtualization=!container" in all plymouth-*.service, also systemd-ask-password-plymouth.path. - Update to version 0.9.4+git20181105.f898586: bump to 0.9.4 - Update to version 0.9.3+git20181031.025ce59: drm: use preferred mode for outputs drm: Refactor ply_renderer_connector_get_rotation drm: Reset LUT/gamma table before the first drmModeSetCrtc call libply: Move kernel commandline parsing functions to libply/ply-utils throbber: Don't skip last frame when waiting for end. - Drop plymouth-throbber-Don-t-skip-last-frame-when-waiting-for-end.patch * Upstream has already accept Michal's modification. - plymouth-throbber-Don-t-skip-last-frame-when-waiting-for-end.patch * Make sure plymouthd stops throbber animation at the first opportunity after receiving quit command, instead of looping multiple times. (boo#1110199) - Update to version 0.9.3+git20180827.0a66272: * boot-server: free the argument and triggers * event-loop: fix leak in error path * script: fix various memory leaks * key-file: ply_key_file_get_value returns duplicated memory, fix memory leaks. * event-loop: fix leak in error path * boot-splash: fix memory leak in error path * populate-initrd: drop unused local variable - Update to version 0.9.3+git20180827.0a66272: ensure tty is closed on deactivate If plymouth doesn't get explicitly "activated" then when GDM tries to deactivate it, the deactivation request is a noop. One aspect of being active, though is having ownership and control of the terminal. This happens immediately, even before a splash is shown. The `deactivate` request needs to relinguish such control, unconditionally, since some display server is about to use the tty. - Update patch name base on quilt standerd Remove only_use_fb_for_cirrus_bochs.patch Add plymouth-only_use_fb_for_cirrus_bochs.patch Remove 0001-Some-greenish-openSUSE-colors.patch Add plymouth-some-greenish-openSUSE-colors.patch - Update to version 0.9.3+git20180807.7663b0c: * systemd-units: Add "ConditionVirtualization=!container" * README: add link to Code of Conduct * two-step: add unhandled splash mode case to switch * main: fix build * Fix miscellaneous compiler warnings * configure: Pass -Wno-cast-function-type if available * main: Fix getting detailed logs from systemd * main: Show details when ESC is pressed during splash_delay * drm: Remove unnecessary reset_scan_out_buffer_if_needed() call from ply_renderer_head_map() * main: Only activate renderers if the splash uses pixel-displays - Switch to new gitlab home in _service. - Refresh patches with quilt. - Use autosetup macro. - Drop plymouth-fix-window-size: The use of the smallest screen size is deliberate (boo#804607 bsc#894051). - Modify 0001-Add-label-ft-plugin.patch to fix problems with multiline text (bsc#1083695) * to prevent infinite loop newline characters need to be skipped - Use %license instead of %doc (bsc#1082318) - Update to version 0.9.3+git20171220.6e9e95d: * device-manager: drop superfluous create_pixel_displays_for_renderer call * x11: don't call gdk_display_get_name before gtk_init - Update to version 0.9.3+git20171130.fa66a5b: * INSTALL: Fix a spelling error in the command example * populate-initrd: handle themes with subdirs * device-manager: fall back to text mode if graphical devices fail * scripts: Use >&2 instead of /dev/stderr * terminal: add include for sysmacros.h * configure: bump to 0.9.4 * terminal-session: don't delete boot.log * Revert "Make boot.log world readable by default" - Rebase 0002-Install-label-ft-plugin-into-initrd-if-available.patch - Drop stop-graphical.patch: There are no conflicting these days, obsolete this patch to enable auto switch to TTY when display server not exist (boo#1066510). - Update plymouth.spec: Add COPYING file in plymouth package file list, This is for the law requirement (bsc#1043834). - Update to version 0.9.2+git20170424.6fd5c6b: * main: Look for config in runtime dir first * main: Look for theme in runtime dir first * Revert "Recreate boot log at each boot instead of appending" * x11: implement get_display_name * drm: implement get_display_name * configure: don't look for libudev when --without-udev is passed * renderer: export device name from plugin * device-manager: handle NULL renderer better - Remove 0001-device-manager-handle-NULL-renderer-better.patch (upstreamed). - Drop use-mkinitrd.patch: No longer needed, mkinitrd is just a wrapper for dracut now any way, hence this patch is currently pointless. - Remove patch which causes breakage with systemd-vconsole-setup (bsc#1020327): * 0001-let-it-become-a-real-daemon.patch - Add upstream patch to fix crash on boot: * 0001-device-manager-handle-NULL-renderer-better.patch - Replace removal of framebuffer driver and plymouth-ignore-cirrusdrm.patch with single patch: * only_use_fb_for_cirrus_bochs.patch - Update to version 0.9.2+git20161215.18dd755: * terminal: refresh geometry after drm device arrives * logger: stop using carriage returns * build-goo: don't install systemd units during distcheck * systemd-units: Fix uninstall script * configure: switch to tar.xz instead tar.bz2 * libply: fix HiDPI detection * libply, main: Add device scale setting * main: support plymouth.force-scale on the kernel command line * build-goo: make udev support build time optional * device-manager: dont pass terminal as renderer device - Update to version 0.9.2+git20160823.e4b7e49: * libply: fix HiDPI detection * libply, main: Add device scale setting * main: support plymouth.force-scale on the kernel command line - Refresh patch: * 0001-let-it-become-a-real-daemon.patch - Add systemd to buildrequires to properly detect systemd-ask-password - Sort out with spec-cleaner and move all buildrequires to main scope not to subpkgs, sometimes interpreted wrongly by rpm if it is split - Reduce patches list removing merged upstream (bit differently tho): * 0001-seats-guard-against-NULL-terminal.patch * fix-serial-consoles.patch * plymouth-boot-vga-framebuffer.patch - Refresh patches: * 0001-let-it-become-a-real-daemon.patch - Update to version 0.9.2+git20160620.0e65b86: * configure: tweak defaults to be more systemd friendly * text: don't draw if not animating * terminal: always open terminal in non-blocking mode * device-manager: probe existing DRM devices at startup * drm: don't pick up drm master implicitly * terminal: refresh geometry after drm device arrives * logger: stop using carriage returns * build-goo: don't install systemd units during distcheck * systemd-units: Fix uninstall script * configure: switch to tar.xz instead tar.bz2 - Remove framebuffer support bsc#980750 and bsc#982226 - Add 0003-fix_null_deref.patch as well - Avoid potential SEGV if label plugin fails to load - Add 0001-Add-label-ft-plugin.patch and 0002-Install-label-ft-plugin-into-initrd-if-available.patch: - Ability to output text in initrd, needed for encryption - boo#959986 - Update to version 0.9.2: + two-step: Add separate startup / shutdown animations. + device-manager: try fb device if drm device failed. + Port to GTK+ 3.0. + script support system update events. + Drop the obsolete log-viewer - Rebase patches: + plymouth-fix-window-size + stop-graphical.patch + 0001-Some-greenish-openSUSE-colors.patch + fix-serial-consoles.patch + 0001-seats-guard-against-NULL-terminal.patch + plymouth-ignore-cirrusdrm.patch + plymouth-boot-vga-framebuffer.patch + 0001-let-it-become-a-real-daemon.patch - Drop upstream fixed patches: + 0001-device-manager-only-call-ply_terminal_free.patch + 0001-splash-remove-pixel_pixel-in-sprite-lib-when-notifie.patch + 0001-splash-do-not-process-display-lists-if-it-is-empty.patch + 0001-libply-splash-core-also-monitor-for-file-removal-in-.patch + 0001-seat-be-a-little-more-forgiving-in-the-case-there-s-.patch + 0001-text-step-bar-use-correct-utf-8-multibyte-sequence-f.patch - Replace pkgconfig(gtk+-2.0) BuildRequires with pkgconfig(gtk+-3.0), following upstreams port to GTK+ 3.0. - Rename library subpackage from *2 to *4, followings upstreams soname bump. - Drop utils subpackage: the log-viewer, which was the only tool left, has been dropped. - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562) - Use is_opensuse to simplify if/else block - Add a direct dependency on systemd, since we need to know the path to systemd-tty-ask-password-agent, fixes part of bsc#943312 - fix bashisms in post/postun scripts - Update 0001-let-it-become-a-real-daemon.patch to call setsid only from the child process. - Add 0001-let-it-become-a-real-daemon.patch to make plymouth a real daemon, fixes part of bnc#889757. Patch by Werner. - Add plymouth-boot-vga-framebuffer.patch to fix boot_vga problem with framebuffer devices. (bnc#886211) - Modify plymouth-ignore-cirrusdrm.patch to return as early as possible. Patch by glin(a)suse.com - Invert the logic in plymouth-ignore-cirrusdrm.patch bnc#890516 - Add 0001-text-step-bar-use-correct-utf-8-multibyte-sequence-f.patch: fix incorrect UTF-8 code used for square (bnc#886148). - Add plymouth-ignore-cirrusdrm.patch: ignore cirrus drm and use fb instead (bnc#888590) - Add 0001-seat-be-a-little-more-forgiving-in-the-case-there-s-.patch: Be more forgiving with empty seat. - Update 0001-Some-greenish-openSUSE-colors.patch to also use SUSE colors on tribar (bnc#886148) - Add 0001-libply-splash-core-also-monitor-for-file-removal-in-.patch: handle new udev behaviour in seqnum removal. - Add 0001-splash-do-not-process-display-lists-if-it-is-empty.patch: fix crash when calling plymouth quit - Add 0001-seats-guard-against-NULL-terminal.patch: guard against NULL terminal. - Update stop-graphical.patch: add RemainAfterExit=true to plymouth-start.service, ensuring plymouthd is not restarted when switching between runlevels. - Add 0001-splash-remove-pixel_pixel-in-sprite-lib-when-notifie.patch: fix crash when pixel_display is removed. - Add 0001-device-manager-only-call-ply_terminal_free.patch: fix crash. - Add use-mkinitrd.patch: call mkinitrd -B, not dracut for now, otherwise initramfs is being created by plymouth-update-initrd, not initrd file. - Ensure we don't rebuild initrd twice when updating plymouth. - Ensure default theme is SLE/openSUSE (based on %suse_version) - Release 0.9.0 (3 additional fixes compared to previously packaged git snapshot): + Use udev for graphics device enumeration + Add new text plugin to replace the tribar one + Add background tiling and watermark support to two-step + Make various plymouth commands that change state be resilient to being called multiple times + Support going back to the initrd at shutdown + Keyfile parser improvements + Make plymouthd use better defaults when running on top of X11 + Fixes for systems using QXL + minor two-step plugin fixes + Use /sys/class/tty/console/active instead of parsing /proc/cmdline for consoles. + Documentation improvements + Drop driver specific renderers and use generic driver across the board. + Better debug message output + systemd integration fixes + upstart integration fixes + initrd scripts fixes + Misc fixes - Update fix-serial-consoles.patch to fix a crash in some rare cases. - Add fix-serial-consoles.patch to fix binary garbage on serial consoles. This is bnc#873859 - Remove plymouth-restore-suspend.patch: suspend package is being dropped, no longer needs to provide this old API. - Remove requires on suspend package. - Update to git snapshot as of 20140327 * Fixes bnc#872502 and bnc#872428 - Kill all mkinitrd stuff Remove suse-initrd-support - Tell zypper to regenerate initrd on installation/update via %post and %posttrans scripts - Add plymouth-manpages.patch to fix manpage installation (bnc#871419) - Drop plymouth.conf, it is no longer used, plymouthd.conf is nowadays. - Updated from git - carried over patches - Dropped 0001-Make-plymouthd-real-daemon-and-save-old-log.patch Because it is really not necesary - Add patch 0001-Make-plymouthd-real-daemon-and-save-old-log.patch all daemons should call setsid(2) to become a real daemons without controlling terminal. Beside this the old boot log will help for debugging and for support. - Add powerpc64le-linux support. - disable plymouth in initrd if the root volume is encrypted. This is a workaround until plymouth is able to handle the prompt correctly (bnc#834063). - version 0.8.8_git201309032142 - All device specific code has been removed because the kernel has been fixed in the meanwhile so plymouth no longer requires libdrm_intel, libdrm_radeon, libdrm_nouveau and can use the generic interface. This commit does not add any new features or bugfixes but removes a huge chunk of unnecessary code. - Pre require plymouth from plymouth-scripts; (bnc#806388). - Update to version 0.8.8_git201308011340 - Drop patch plymouth-correct-systemd-prefix.patch - Drop patch plymouth-close.patch - Drop patch plymouth-close-unredirect.patch - Drop patch plymouth-redirect-null.patch - Drop patch plymouth-exit-code.patch - Drop patch plymouth-terminal-session-close.patch - Add upstream patch plymouth-correct-systemd-prefix.patch to correct the systemd prefixes in some systemd files. This replaces the sed string. - Require pigz instead of gzip - ensure plugin requires are versioned. - own %{_localstatedir}/log/boot.log and %{_localstatedir}/spool/plymouth/boot.log (as %ghost s) - Add plymouth-close: do not try to close negative fd. - Add plymouth-close-unredirect.patch: do not leak fd when stopping redirection of /dev/console (bnc#811185) - Add plymouth-redirect-null.patch: redirect plymouth standard io to /dev/null (bnc#811185) - Add plymouth-exit-code.patch: ignore exit code in ExecStartPost. - Add plymouth-terminal-session-close.patch: do no try to close terminal session fd if already closed. - Not only reboot.service is prefixed with systemd- currently but also kexec,halt,poweroff. - Also ensure we express rpm dependencies correctly this package is not gonna work on systemd < 186. - Update to version 0.8.8_git201304161248 - drop plymouth-change-service-name.patch, replaced by a sed script that will account for all service files' future changes - drop patch plymouth-trace-lines, in upstream now - drop plymouth-udevadm-path.patch, generic solution in upstream now. - drop ply-sdunitdir.patch likewise. - drop plymouth-systemd-in-usr.patch likewise. - drop systemd-no-warning.patch, not needed with newer systemd - drop plymouth-sd-notforking.patch , not really needed anymore. - Changed %post scripts so only the rebuild of the initrd is omitted within the build environment - Added patch plymouth-correct-runtime-dir.patch to make the plymouthruntimedir equal to /run/plymouth and not /var/run/plymouth - Rename plymouth-sd-notforking.patch to fix typo in patch name - Add plymouth-change-service-name.patch: fix incorrect service names used for dependencies. Now use systemd-reboot.service (replacing reboot.service) and display-manager.service (replacing prefdm.service). - Make sure that the right version of the scripts is required by the main package. This to prevent that an update of the scripts is not installed (bnc#793400) - Removed obsolete patch plymouth-remove-pid-file.patch. Issue has been resolved upstream - fix path to systemd-tty-ask-password-agent for newer systemd - create the pid file again during boot, the existence of this is a condition for systemd-ask-password-plymouth.service. A proper fix might look different but that get's it going again. - Provide the scripts to integrate Plymouth in dracut as a separate package. - Added patch (plymouth-dracut-path.patch) to correct the paths inside the specific plymouth-dracut scripts - Update to an slightly newer git snapshot to fix regression from 0.8.8 - Version 0.8.8 * main: Try to own socket before anything else * main: silently succeed if plymouthd is started a second time * service: start plymouthd unconditionally * x11: make window fullscreen by default * x11: only create windows when necessary - plymoith-sd-notforking.patch: Make plymouthd to not use Service type "forking" - ply-sdunitdir.patch: Must install units in %{_unitdir} as returned by pkg-config not in a hardcoded location. - Remove the non required font file in /etc/fonts/conf.avail/ . - Adjusted the upstream patch to remove the pid file. The original one seems to cause issues with the DM killing plymouth - Fix the Pango installation within the initrd. This would resolve the error message that Pango cannot find any fonts - fix the libdir path in plymouth-set-default-theme (bnc#780085) - Update to version 0.8.7 + fix plymouth race at bootup breaking efi/vesa handoff + Systemd fixes - Add plymouth-remove-pid-file.patch: remove PID file usage (bnc#780976) (Thanks to fcrozat) - Remove upstream patches: plymouth-systemd-target.patch, 0001-ply-text-progress-bar-strip-quotes-if-present,patch, plymouth-fix-systemd-service.patch, plymouth-after-udev-settle due to upstream inclusion. - Add plymouth-after-udev-settle.patch: ensure plymouth is started after udev triggers has been started (git + name change due to systemd < 183 in openSUSE 12.2). - Ensure that the right Pango version is used for copying one of the pango modules - Add plymouth-fix-systemd-service.patch: remove dashes next to semi-colons, it confuses systemd. (bnc#774400) - Update suse-initrd-support to not start plymouth if kernel cmdline contains "shell" or "plymouth.enable=0" or "rd.plymouth=0". - remove suspend dependency on ARM - Ship /etc/os-release in the initrd so that the pretty name is displayed in text-splash mode - Give the text-splash some SUSE-typical green coloring - fix build for ARM - Move the openSUSE branding to its rightful place - Update to 0.8.6.1: + Fix systemd path file generation - Changes from 0.8.6: + fix flush_area fast-path + seed random number generator by default for script plugins + allow plymouth to be built without gtk dependency + cope with lack of /etc/os-release better + pull in systemd unit files (bnc#770890) + add support for new "updates" mode for doing package updates (only available for some plugins at the moment) - Add plymouth-restore-suspend.patch: revert commit removing suspend/resume support, needed for suspend package. - Add plymouth-systemd-target.patch: add missing symlinks to start plymouth on shutdown / reboot / kexec (bnc#770764). - Add plymouth-udevadm-path.patch: adapt to udevadm path on openSUSE. - Ensure systemctl daemon-reload is called in post / postun - Add systemd-no-warning.patch: remove Documentation tag not handled by systemd v44. - Update stop-graphical.patch to correct prevent plymouth.quit to start under runlevel 5 (handled by xdm initscript directly). - don't require intel_drm on ppc - run "/sbin/mkinitrd" and let it figure out by itself what initrds to update. bnc#769812 - Provides systemd units, instead of relying on systemd to ship them (bnc#769397). - Ensure plymouth--wait-quit.service conflicts with graphical.target. - Update to 0.8.5.1 + two-step splash plugin quit fixes + add generic driver to drm renderer plugin This allows new modesetting drivers to work with plymouth automatically + fixes for video cards that don't support 32bpp + add alignment and width features to label controls + new documentation + event loop fix + more serial console fixes + better systemd integration + new flush api to client library + Allow plymouth to build the drm renderer without the driver dependent libdrm_* libraries. - disable plymouth if init is not systemd (could be e.g. /bin/sh or sysvinit then) - if we provide bootsplash, we should also make sure to obsolete its version - Ensure that the openSUSE theme is default. (bnc#765277) - Remove unnecessary changes to the kernel options. Plymouth also accepts splash=silent. - Add plymouth-scripts Requires(post) to branding-openSUSE subpackage, to make sure that the %post scriptlet will work. - Make sure we export LIB and not lib in the %postun scriptlets of theme-solar and branding-openSUSE subpackages. - Ensure that label.so is being installed for the openSUSE branding (bnc#763574) - Update the installation/update from plymouth in a way that the initrd file for the current running kernel is updated. - Corrected a typo with regards to the location of a pango module when setting up the initrd. - Added a patch for openSUSE to enable the rebuild of the initrd with the plymouth-set-default-theme script. (bnc#757284) - Added plymouth to the requires of plymouth-scripts. This should resolve bug (bnc#757284) - Split x11 renderer into his own package; the x11 renderer allows users to test plymouth themes; having it available on the devel package will force people who just want to test a theme to install a lot of unwanted dependencies. Being on it's own package without explicit dependencies provides extra functionality to users who want to test themes without having to rebuild initrd and rebooting for testing. - bnc#761403 - Reduce the number of fonts that are included in the initrd. Also let mkinitrd sort out the dependencies for the required libs. - Use the same font as that grub2 is currently using for it's graphics mode. - Correct the theme name in the post install script of plymouth-branding-openSUSE - Updated the initrd patch to include the necessary files to have text support (e.g. LUKS passphrase question, etc) - Temporarily added a openSUSE plymouth theme (plymouth-branding-openSUSE) to have a better integration with 12.2. - Ensure that both grub and grub2 are adjusted with regards to the splash parameter. Running grub2-mkconfig to have the right configuration. - Installation of themes are not causing any reset of the selected default theme anymore. Now this only happens when a theme is installed and the default theme is set to TEXT. - Update to the official release of 0.8.4 * Bugfix: Use /dev/fb0 instead of /dev/fb, this resolves the issue of not showing the splash during shutdown - Add a small change in order to have plymouth activated with Grub2 - Make sure that the package libply-boot-client is always installed to prevent a system that will not boot - Replaced package core-libs with individual packages for each shared library (SLPP) - Proper provides/obsoletes pair for bootsplash - Could not resist to run spec-cleaner ;-) - Changed the parameters to plymouthd in the initrd to create the necessary pid-file for the systemd integration - Ensure that /bin/plymouth still is available as that the displaymanagers (KDM/GDM) are expecting this. This needs to be in place until the migration to /usr is completed. - Finalize the Plymouth integration on openSUSE. * Current default theme is Solar with the openSUSE Geecko * Plymouth bootsplash will run on tty7 during boot. * Install all files in /usr - Update to current git - Update to git snapshot from 12 Mar 2011. - Mostly minor fixes. - Updated to latest snapshot. - boot-server: improve debug output - pixel-buffer: Fix overflow in blend_two_pixel_values - boot-server: fix debug output when message is from init - Fixed an issue with the script plugin's Window attributes returning the size of the smallest display when multiple displays are used. - Fixed location of text.so and details.so in plymouth-scripts - fix the build failure: - own additional directories - fix rpmlint failures: - fix up package groups - those are just guessed sometimes - rename plymouth-graphics-libs to libply-splash-graphics2 (this one was fatal) - do not own /var/run/plymouth - probably still needs fixing (this was almost fatal) - do not include build date in binary, use mtime of source patchfile instead - Initial packaging.

1 0

New Tumbleweed snapshot 20201205 released!
by Dominique Leuenberger 08 Dec '20

08 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: ImageMagick (7.0.10.43 -> 7.0.10.45) MozillaThunderbird (78.5.0 -> 78.5.1) PackageKit apparmor (3.0.0 -> 3.0.1) autofs busybox fwupd (1.5.1 -> 1.5.2) glibmm2_4 (2.64.4 -> 2.64.5) gnome-shell (3.38.1 -> 3.38.2) gnome-shell-extensions (3.38.1 -> 3.38.2) kernel-source (5.9.11 -> 5.9.12) kvm_stat (5.9.8 -> 5.9.12) libapparmor (3.0.0 -> 3.0.1) libarchive (3.4.3 -> 3.5.0) libreoffice libvirt (6.9.0 -> 6.10.0) libyui-qt (2.56.3 -> 2.56.4) mutter (3.38.1 -> 3.38.2) nano (5.3 -> 5.4) open-vm-tools orca (3.38.0 -> 3.38.1) plasma5-disks (5.20.3 -> 5.20.4) plasma5-thunderbolt (5.20.3 -> 5.20.4) python-Pygments (2.7.2 -> 2.6.1) python-async_generator python-future python-gunicorn python-libvirt-python (6.9.0 -> 6.10.0) python-pycairo (1.19.1 -> 1.20.0) python-setproctitle (1.1.10 -> 1.2) python-sniffio rubygem-packaging_rake_tasks (1.4.11 -> 1.4.14) snapper spice-gtk (0.38 -> 0.39) sqlite3 (3.33.0 -> 3.34.0) unbound (1.12.0 -> 1.13.0) webkit2gtk3 yast2-storage-ng (4.3.24 -> 4.3.27) yast2-users (4.3.9 -> 4.3.10) === Details === ==== ImageMagick ==== Version update (7.0.10.43 -> 7.0.10.45) Subpackages: ImageMagick-config-7-SUSE ImageMagick-extra libMagick++-7_Q16HDRI4 libMagickCore-7_Q16HDRI8 libMagickWand-7_Q16HDRI8 - version update to 7.0.10.45 * added support for the farbfeld format (reference https://github.com/ImageMagick/ImageMagick/discussions/2664) * specify the bilateral neighbor as width/height rather than radius/sigma. * correct reading of first row in TIFF decoder. * correct rotation parameter for SVG transform. ==== MozillaThunderbird ==== Version update (78.5.0 -> 78.5.1) Subpackages: MozillaThunderbird-translations-common - Mozilla Thunderbird 78.5.1 MFSA 2020-53 (bsc#1179530) * CVE-2020-26970 (bmo#1677338) Stack overflow due to incorrect parsing of SMTP server response codes ==== PackageKit ==== Subpackages: PackageKit-backend-zypp PackageKit-gstreamer-plugin PackageKit-gtk3-module PackageKit-lang libpackagekit-glib2-18 typelib-1_0-PackageKitGlib-1_0 - Add PackageKit-zypp-cleanup-tmp-files.patch: Revert "Revert "zypp: Clean up temporary files when PK quits"" (bsc#1169739 gh#hughsie/PackageKit/commit#cf73b01a). ==== apparmor ==== Version update (3.0.0 -> 3.0.1) Subpackages: apparmor-abstractions apparmor-docs apparmor-parser apparmor-parser-lang apparmor-profiles apparmor-utils apparmor-utils-lang pam_apparmor pam_apparmor-32bit python3-apparmor - update to AppArmor 3.0.1 - minor additions to profiles and abstractions - some bugfixes in libapparmor, apparmor_parser and the aa-* utils - see https://gitlab.com/apparmor/apparmor/-/wikis/Release_Notes_3.0.1 for the detailed upstream changelog - removed upstream(ed) patches: - changes-since-3.0.0.diff - extra-profiles-fix-Pux.diff - utils-fix-hotkey-conflict.diff - Use apache provided variables for the module_directry: + Use %apache_libexecdir + Add apache-rpm-macros BuildRequires ==== autofs ==== - automount-fix-master-wait.patch: Fix options string for master wait (bsc#1178006) - autofs-nsswitch-usr-etc.patch: Use /usr/etc/nsswitch.conf if /etc/nsswitch.con is unavailable (bsc#1175238) ==== busybox ==== Subpackages: busybox-static - prepare usrmerge (boo#1029961) ==== fwupd ==== Version update (1.5.1 -> 1.5.2) Subpackages: fwupd-lang libfwupd2 libfwupdplugin1 typelib-1_0-Fwupd-2_0 - Update to version 1.5.2: + ata: Add OUI quirk for Toshiba + libfwupd: Restore recognizing gpg and pkcs7 types still + Register the SoupSession gtype when required + Switch from libsoup to libcurl + Fix sync method when called from threads without a context + Move ABI check to Github actions + Enable github workflows + libfwupd: Add fwupd_client_download_file() + libfwupd: Add fwupd_client_get_user_agent() + Only download the remote metadata as required + Add breaks for fwupdate 12-7 (Closes: #960688) + Install modules-load configs in the correct directory + vli: Do not be clever replugging the MSP430 device + vli: Make some trivial debugging more specific to help debug an issue + make gcab optional + Fall back to FAT32 internal partitions for detecting ESP + Add a flag to indicate if packages are supported + uefi: a new option for uefi configuration to use UEFI removable path + Add a section to man page on scripting + synaptics-mst: Improve reliability by waiting 2 seconds after writing data + hailuck: Add an plugin for the Pinebook Pro laptop + Allow setting global flags for FuHidDevice + Set the SMBIOS chassis type to portable if a DT battery exists + colorhug: Don't set the version format to triplet at startup + Allow components to set the icon from the metadata + colorhug: Fix detection of version on older firmware versions + bcm57xx: Fix reading vendor/device ids from firmware. + Remove HSI update and attestation suffixes + trivial: make dbxtool executable to fix snap build + Ignore an invalid vendor-id when adding releases for display + Notify the service manager when idle-quitting - Refresh fwupd-bsc1130056-change-shim-path.patch - Changes in BuildRequires: + Replace pkgconfig(libsoup-2.4) with pkgconfig(libcurl) + Replace pkgconfig(systemd) with pkgconfig(libsystemd) - fwupd-msr.conf and fwupd-platform-integrity.conf are moved to %{_modulesloaddir}. ==== glibmm2_4 ==== Version update (2.64.4 -> 2.64.5) Subpackages: libgiomm-2_4-1 libglibmm-2_4-1 - Update to version 2.64.5: + gmmproc: Fix compatibility with gtkmm 3.24.2. + Build: Meson build: Fix Cocoa (macOS) detection. ==== gnome-shell ==== Version update (3.38.1 -> 3.38.2) Subpackages: gnome-shell-calendar gnome-shell-lang - Update to version 3.38.2: + Handle @content properties in ease() functions. + Fix screencast indicator on Xorg. + Fix inline-replies in chat notifications. + Improve do-not-disturb support. + Fix mobile broadband support. + Improve app picker spacing on larger resolutions. + Plugged leaks. + Fixed crashes. + Misc. bug fixes and cleanups. + Updated translations. - Drop 98234acd5b48a58c2d112b5edb3dddb85e04a643.patch: Fixed upstream. ==== gnome-shell-extensions ==== Version update (3.38.1 -> 3.38.2) Subpackages: gnome-shell-classic gnome-shell-classic-session - Update to version 3.38.2: + window-list: Honor changes in skip-taskbar property. + window-list, workspace-indicator: - Improve previews in workspace thumbs. - Adjust to 3.38 changes. + auto-move: Improve behavior on multi-monitor setups. + windowNavigator: Adjust to 3.38 changes. + Misc. bug fixes. ==== kernel-source ==== Version update (5.9.11 -> 5.9.12) Subpackages: kernel-default kernel-docs - Linux 5.9.12 (bsc#1012628). - io_uring: get an active ref_node from files_data (bsc#1012628). - io_uring: order refnode recycling (bsc#1012628). - spi: bcm-qspi: Fix use-after-free on unbind (bsc#1012628). - spi: bcm2835: Fix use-after-free on unbind (bsc#1012628). - ipv4: use IS_ENABLED instead of ifdef (bsc#1012628). - IB/hfi1: Ensure correct mm is used at all times (bsc#1012628). - RDMA/i40iw: Address an mmap handler exploit in i40iw (bsc#1012628). - btrfs: fix missing delalloc new bit for new delalloc ranges (bsc#1012628). - btrfs: tree-checker: add missing return after error in root_item (bsc#1012628). - btrfs: tree-checker: add missing returns after data_ref alignment checks (bsc#1012628). - btrfs: don't access possibly stale fs_info data for printing duplicate device (bsc#1012628). - btrfs: fix lockdep splat when reading qgroup config on mount (bsc#1012628). - rtc: pcf2127: fix a bug when not specify interrupts property (bsc#1012628). - s390: fix fpu restore in entry.S (bsc#1012628). - mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback) (bsc#1012628). - smb3: Call cifs reconnect from demultiplex thread (bsc#1012628). - smb3: Avoid Mid pending list corruption (bsc#1012628). - smb3: Handle error case during offload read path (bsc#1012628). - cifs: fix a memleak with modefromsid (bsc#1012628). - powerpc/64s: Fix KVM system reset handling when CONFIG_PPC_PSERIES=y (bsc#1012628). - powerpc/64s/exception: KVM Fix for host DSI being taken in HPT guest MMU context (bsc#1012628). - KVM: PPC: Book3S HV: XIVE: Fix possible oops when accessing ESB page (bsc#1012628). - KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace (bsc#1012628). - KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint (bsc#1012628). - KVM: x86: Fix split-irqchip vs interrupt injection window request (bsc#1012628). - iommu/vt-d: Don't read VCCAP register unless it exists (bsc#1012628). - firmware: xilinx: Use hash-table for api feature check (bsc#1012628). - drm/amdgpu: fix SI UVD firmware validate resume fail (bsc#1012628). - io_uring: fix ITER_BVEC check (bsc#1012628). - trace: fix potenial dangerous pointer (bsc#1012628). - arm64: tegra: Correct the UART for Jetson Xavier NX (bsc#1012628). - arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 (bsc#1012628). - arm64: pgtable: Fix pte_accessible() (bsc#1012628). - arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect() (bsc#1012628). - drm/amdgpu: fix a page fault (bsc#1012628). - drm/amdgpu: update golden setting for sienna_cichlid (bsc#1012628). - drm/amd/amdgpu: fix null pointer in runtime pm (bsc#1012628). - drm/amd/display: Avoid HDCP initialization in devices without output (bsc#1012628). - HID: uclogic: Add ID for Trust Flex Design Tablet (bsc#1012628). - HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses (bsc#1012628). - HID: cypress: Support Varmilo Keyboards' media hotkeys (bsc#1012628). - HID: add support for Sega Saturn (bsc#1012628). - Input: i8042 - allow insmod to succeed on devices without an i8042 controller (bsc#1012628). - HID: hid-sensor-hub: Fix issue with devices with no report ID (bsc#1012628). - staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK (bsc#1012628). - HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices (bsc#1012628). - dmaengine: xilinx_dma: use readl_poll_timeout_atomic variant (bsc#1012628). - x86/xen: don't unbind uninitialized lock_kicker_irq (bsc#1012628). - kunit: fix display of failed expectations for strings (bsc#1012628). - HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge (bsc#1012628). - HID: Add Logitech Dinovo Edge battery quirk (bsc#1012628). - proc: don't allow async path resolution of /proc/self components (bsc#1012628). - nvme: free sq/cq dbbuf pointers when dbbuf set fails (bsc#1012628). - io_uring: handle -EOPNOTSUPP on path resolution (bsc#1012628). - net: stmmac: dwmac_lib: enlarge dma reset timeout (bsc#1012628). - vdpasim: fix "mac_pton" undefined error (bsc#1012628). - vhost: add helper to check if a vq has been setup (bsc#1012628). - vhost scsi: alloc cmds per vq instead of session (bsc#1012628). - vhost scsi: fix cmd completion race (bsc#1012628). - cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE (bsc#1012628). - dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst size (bsc#1012628). - scsi: libiscsi: Fix NOP race condition (bsc#1012628). - scsi: target: iscsi: Fix cmd abort fabric stop race (bsc#1012628). - lockdep: Put graph lock/unlock under lock_recursion protection (bsc#1012628). - perf/x86: fix sysfs type mismatches (bsc#1012628). - xtensa: uaccess: Add missing __user to strncpy_from_user() prototype (bsc#1012628). - x86/dumpstack: Do not try to access user space code of other tasks (bsc#1012628). - net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset (bsc#1012628). - bus: ti-sysc: Fix reset status check for modules with quirks (bsc#1012628). - bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw (bsc#1012628). - ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() (bsc#1012628). - phy: tegra: xusb: Fix dangling pointer on probe failure (bsc#1012628). - iwlwifi: mvm: use the HOT_SPOT_CMD to cancel an AUX ROC (bsc#1012628). - iwlwifi: mvm: properly cancel a session protection for P2P (bsc#1012628). - iwlwifi: mvm: write queue_sync_state only for sync (bsc#1012628). - KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup (bsc#1012628). - KVM: s390: remove diag318 reset code (bsc#1012628). - batman-adv: set .owner to THIS_MODULE (bsc#1012628). - usb: cdns3: gadget: fix some endian issues (bsc#1012628). - usb: cdns3: gadget: calculate TD_SIZE based on TD (bsc#1012628). - phy: qualcomm: usb: Fix SuperSpeed PHY OF dependency (bsc#1012628). - phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependency (bsc#1012628). - arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed (bsc#1012628). - bus: ti-sysc: suppress err msg for timers used as clockevent/source (bsc#1012628). - ARM: dts: dra76x: m_can: fix order of clocks (bsc#1012628). - scsi: ufs: Fix race between shutdown and runtime resume flow (bsc#1012628). - bnxt_en: fix error return code in bnxt_init_one() (bsc#1012628). - bnxt_en: fix error return code in bnxt_init_board() (bsc#1012628). - video: hyperv_fb: Fix the cache type when mapping the VRAM (bsc#1012628). - bnxt_en: Release PCI regions when DMA mask setup fails during probe (bsc#1012628). - block/keyslot-manager: prevent crash when num_slots=1 (bsc#1012628). - cxgb4: fix the panic caused by non smac rewrite (bsc#1012628). - dpaa2-eth: select XGMAC_MDIO for MDIO bus support (bsc#1012628). - s390/qeth: make af_iucv TX notification call more robust (bsc#1012628). - s390/qeth: fix af_iucv notification race (bsc#1012628). - s390/qeth: fix tear down of async TX buffers (bsc#1012628). - drm/mediatek: dsi: Modify horizontal front/back porch byte formula (bsc#1012628). - bonding: wait for sysfs kobject destruction before freeing struct slave (bsc#1012628). - ibmvnic: fix call_netdevice_notifiers in do_reset (bsc#1012628). - ibmvnic: notify peers when failover and migration happen (bsc#1012628). - powerpc/64s: Fix allnoconfig build since uaccess flush (bsc#1012628). - iommu: Check return of __iommu_attach_device() (bsc#1012628). - IB/mthca: fix return value of error branch in mthca_init_cq() (bsc#1012628). - i40e: Fix removing driver while bare-metal VFs pass traffic (bsc#1012628). - firmware: xilinx: Fix SD DLL node reset issue (bsc#1012628). - spi: imx: fix the unbalanced spi runtime pm management (bsc#1012628). - io_uring: fix shift-out-of-bounds when round up cq size (bsc#1012628). - aquantia: Remove the build_skb path (bsc#1012628). - nfc: s3fwrn5: use signed integer for parsing GPIO numbers (bsc#1012628). - net: ena: handle bad request id in ena_netdev (bsc#1012628). - net: ena: set initial DMA width to avoid intel iommu issue (bsc#1012628). - net: ena: fix packet's addresses for rx_offset feature (bsc#1012628). - ibmvnic: fix NULL pointer dereference in reset_sub_crq_queues (bsc#1012628). - ibmvnic: fix NULL pointer dereference in ibmvic_reset_crq (bsc#1012628). - ibmvnic: enhance resetting status check during module exit (bsc#1012628). - optee: add writeback to valid memory type (bsc#1012628). - x86/tboot: Don't disable swiotlb when iommu is forced on (bsc#1012628). - arm64: tegra: Wrong AON HSP reg property size (bsc#1012628). - efi/efivars: Set generic ops before loading SSDT (bsc#1012628). - efivarfs: revert "fix memory leak in efivarfs_create()" (bsc#1012628). - efi: EFI_EARLYCON should depend on EFI (bsc#1012628). - riscv: Explicitly specify the build id style in vDSO Makefile again (bsc#1012628). - RISC-V: Add missing jump label initialization (bsc#1012628). - RISC-V: fix barrier() use in <vdso/processor.h> (bsc#1012628). - net: stmmac: fix incorrect merge of patch upstream (bsc#1012628). - enetc: Let the hardware auto-advance the taprio base-time of 0 (bsc#1012628). - ptp: clockmatrix: bug fix for idtcm_strverscmp (bsc#1012628). - drm/nouveau: fix relocations applying logic and a double-free (bsc#1012628). - can: gs_usb: fix endianess problem with candleLight firmware (bsc#1012628). - platform/x86: thinkpad_acpi: Send tablet mode switch at wakeup time (bsc#1012628). - platform/x86: toshiba_acpi: Fix the wrong variable assignment (bsc#1012628). - RDMA/hns: Fix wrong field of SRQ number the device supports (bsc#1012628). - RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP (bsc#1012628). - RDMA/hns: Bugfix for memory window mtpt configuration (bsc#1012628). - can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags (bsc#1012628). - can: m_can: fix nominal bitiming tseg2 min for version >= 3.1 (bsc#1012628). - perf record: Synthesize cgroup events only if needed (bsc#1012628). - perf stat: Use proper cpu for shadow stats (bsc#1012628). - perf probe: Fix to die_entrypc() returns error correctly (bsc#1012628). - USB: core: Change %pK for __user pointers to %px (bsc#1012628). - usb: gadget: f_midi: Fix memleak in f_midi_alloc (bsc#1012628). - USB: core: Fix regression in Hercules audio card (bsc#1012628). - USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO built-in usb-audio card (bsc#1012628). - usb: gadget: Fix memleak in gadgetfs_fill_super (bsc#1012628). - irqchip/exiu: Fix the index of fwspec for IRQ type (bsc#1012628). - x86/mce: Do not overwrite no_way_out if mce_end() fails (bsc#1012628). - x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpb (bsc#1012628). - x86/resctrl: Remove superfluous kernfs_get() calls to prevent refcount leak (bsc#1012628). - x86/resctrl: Add necessary kernfs_put() calls to prevent refcount leak (bsc#1012628). - drm/amdgpu: add rlc iram and dram firmware support (bsc#1012628). - commit 46922da - rpm/kernel-{source,binary}.spec: do not include ghost symlinks (boo#1179082). - commit 76a9256 - Update config files. Refresh after SOUNDWIRE removal. - commit fa3b6ea - scripts/lib/SUSE/MyBS.pm: properly close prjconf Macros: section - commit 965157e - Update config files: make CONFIG_SOUNDWIRE=m (bsc#1179201) Also turned it off for unrelated platforms - commit afd1f81 - Update patches.kernel.org/5.9.11-181-sched-Fix-data-race-in-wakeup.patch (bsc#1012628 bsc#1175893). Add a bsc. - commit d5a5c02 - dt-bindings: pwm: Add binding for RPi firmware PWM bus (jsc#SLE-16543). - staging: vchiq: Release firmware handle on unbind (jsc#SLE-16543). - soc: bcm: raspberrypi-power: Release firmware handle on unbind (jsc#SLE-16543). - - pwm: Add Raspberry Pi Firmware based PWM bus (jsc#SLE-16543). - Update configs: Enable pwm driver on arm64/arm32 - supported.conf: Enable pwm driver - input: raspberrypi-ts: Release firmware handle when not needed (jsc#SLE-16543). - gpio: raspberrypi-exp: Release firmware handle on unbind (jsc#SLE-16543). - firmware: raspberrypi: Keep count of all consumers (jsc#SLE-16543). - firmware: raspberrypi: Introduce devm_rpi_firmware_get() (jsc#SLE-16543). - clk: bcm: rpi: Release firmware handle on unbind (jsc#SLE-16543). - commit e8d4edd ==== kvm_stat ==== Version update (5.9.8 -> 5.9.12) - Include the example service file in the package * install it in /usr/share/kvm_stat * this deals properly with bsc#1179469 ==== libapparmor ==== Version update (3.0.0 -> 3.0.1) Subpackages: libapparmor1 libapparmor1-32bit - update to AppArmor 3.0.1 - see https://gitlab.com/apparmor/apparmor/-/wikis/Release_Notes_3.0.1 for the detailed upstream changelog - drop upstream patch changes-since-3.0.0.diff ==== libarchive ==== Version update (3.4.3 -> 3.5.0) - Update to version 3.5.0 New features: * mtree digest reader support (#1347) * completed support for UTF-8 encoding conversion (#1389) * minor API enhancements (#1258, #1405) * support for system extended attributes (#1409) * support for decompression of symbolic links in zipx archives (#1435) Important bugfixes * fixed extraction of archives with hard links pointing to itself (#1381) * cpio fixes (#1387, #1388) * fixed uninitialized size in rar5_read_data (#1408) * fixed memory leaks in error case of archive_write_open() functions (#1456) - Drop libarchive-3.4.3-fix_test_write_disk_secure.patch, fixed upstream. ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit - Disable firebird integration for the time being (boo#1179203). ==== libvirt ==== Version update (6.9.0 -> 6.10.0) Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - Update to libvirt 6.10.0 - jsc#SLE-13688 - Many incremental improvements and bug fixes, see https://libvirt.org/news.html - Dropped patches: f035f53b-virt-guest-shutdown.patch ==== libyui-qt ==== Version update (2.56.3 -> 2.56.4) - Add folder-temp icon (related to jsc#SLE-16313). - 2.56.4 ==== mutter ==== Version update (3.38.1 -> 3.38.2) Subpackages: libmutter-7-0 mutter-data mutter-lang - Update to version 3.38.2: + Fix unwanted position changes on window resize. + Fix _NET_WM_FRAME_DRAWN timestamps. + Fix missed redraws of newly-mapped actors. + (Temporarily) make Xwayland listen on abstract namespace socket again. + Fix tiling to the correct monitor. + Fix background artifacts in magnifier. + Fix monitor tiling support on X11. + Fix device configuration not being picked up on X11. + Improve compatibility with Qt's wayland support. + Support tagging devices as primary GPU via udev. + Fix size hints with CSD. + Do not disable the X Security extension by default. + Fix unresponsive input after screen blank. + Improve tablet-mode-switch support. + Plugged memory leaks. + Fixed crashes. + Misc. bug fixes and cleanups. + Updated translations. ==== nano ==== Version update (5.3 -> 5.4) Subpackages: nano-lang - GNU nano 5.4: * Moving the cursor now skips over combining characters (an other zero-width characters) * Deleting a character deletes also any succeeding zero-width characters but backspacing deletes just one character at a time ==== open-vm-tools ==== Subpackages: libvmtools0 open-vm-tools-desktop - Enable build on aarch64 ==== orca ==== Version update (3.38.0 -> 3.38.1) Subpackages: orca-lang - Update to version 3.38.1: + Web: Fix crash when generating speech for childless math element. + General: Fix bug causing the new radio button group to not be presented when the group was first entered. + Updated translations. ==== plasma5-disks ==== Version update (5.20.3 -> 5.20.4) Subpackages: plasma5-disks-lang - Update to 5.20.4 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma-5.20.4 - No code changes since 5.20.3 ==== plasma5-thunderbolt ==== Version update (5.20.3 -> 5.20.4) Subpackages: plasma5-thunderbolt-lang - Update to 5.20.4 * New bugfix release * For more details please see: * https://kde.org/announcements/plasma-5.20.4 - No code changes since 5.20.3 ==== python-Pygments ==== Version update (2.7.2 -> 2.6.1) - Revert to 2.6.1 (higher version break python-Pelican). ==== python-async_generator ==== - fix pytest call for multiple python flavors gh#openSUSE/python-rpm-macros#66 ==== python-future ==== - Need dbm for more than one python3 flavor gh#openSUSE/python-rpm-macros#66 ==== python-gunicorn ==== - Neither pytest-cov nor standalone mock are true BuildRequirements ==== python-libvirt-python ==== Version update (6.9.0 -> 6.10.0) - Update to 6.10.0 - Add all new APIs and constants in libvirt 6.10.0 - jsc#SLE-13688 ==== python-pycairo ==== Version update (1.19.1 -> 1.20.0) - Update to 1.20.0 * Require Python 3.6+ #pr-201 * Require cairo 1.15.10+ #pr-204 * docs: support Sphinx 3.0 #pr-207 * meson: add ?tests? option to skip tests #pr-188 * Windows: build wheels #pr-197 * Add support for Python 3.9 and 3.10 #pr-198 #pr-202 * examples: add a Jupyter Notebook example #pr-181 * Raise an error early when being passed a file object not opened in binary mode #pr-205 * Add a pyproject.toml file #pr-206 - move header file in sitearch to devel package (rpmlint error) header is packaged twice: gh#pygobject/pycairo#98 - Move the pkgconfig file to the common package gh#openSUSE/python-rpm-macros#66 ==== python-setproctitle ==== Version update (1.1.10 -> 1.2) - Update to version 1.2 * added ``getthreadtitle()`` and ``setthreadtitle()``. * Initialisation of the module moved to the first usage: importing the module doesn't cause side effects. * Manage much longer command lines (#52) * Improved build on BSD, dropped ancient versions (issue #67). * Fixed build for Python 3.8 (#66, #72) * Added support for Python 3.9 * Dropped support for Python < 3.6 - Drop use-pkg-config.patch - Drop extra requirements ==== python-sniffio ==== - skip upcoming python36 flavor because there is no python36-curio ==== rubygem-packaging_rake_tasks ==== Version update (1.4.11 -> 1.4.14) - Do not check license in vector images (needed for jsc#SLE-16313). - 1.4.14 - Use the "--non-interactive" zypper option in the "build_dependencies:install" task if not running in a terminal (related to bsc#1179445) - 1.4.13 - Use "sudo" in the "build_dependencies:install" task only when running as non-root, "sudo" might not be installed when running as root (bsc#1179445) - 1.4.12 ==== snapper ==== Subpackages: libsnapper5 snapper-zypp-plugin - do not override passwd after getpwuid_r et.al. calls (gh#openSUSE/snapper#589) - state in man-pages that ext4 support is discontinued (gh#openSUSE/snapper#331) - use C++11 regexes instead of own regcomp/regexec wrapper class (see gh#openSUSE/snapper#583) ==== spice-gtk ==== Version update (0.38 -> 0.39) Subpackages: libspice-client-glib-2_0-8 libspice-client-glib-helper libspice-client-gtk-3_0-5 - Update to version 0.39. Issues addressed: + !33 - Remove PulseAudio backend + !34 - Remove support to CELT codec + !42 - Drop capabilities from usb-acl-helper binary + !45 - #123 - Install ACL helper in libexec directory + !48 - Add support to Wayland mouse in server mode + !49 - #126 - Read all SASL buffer + !54 - Add Copy & Paste support over Webdav + !58 - Improve input and display on HiDPI displays + !64 - Add support for Physical size display + !69 - Fix leak on Display's surface + !74 - Fix read overflow on (not seamless) migration code + !75 - Fix usb redirect on connect, see [rhbz#1874740] + !77 - Fixes buffer overflow in QUIC [CVE-2020-14355] - Be explicit about the configuration options - Drop these patches, which are in release tarball: Remove-celt-support.patch 0001-quic-Check-we-have-some-data-to-start-decoding-quic-.patch 0002-quic-Check-image-size-in-quic_decode_begin.patch 0003-quic-Check-RLE-lengths.patch 0004-quic-Avoid-possible-buffer-overflow-in-find_bucket.patch - Note: The Mar 9, 2020 spec file cleanup satisfies jsc#SLE-15520 ==== sqlite3 ==== Version update (3.33.0 -> 3.34.0) - SQLite 3.34.0: * Added the sqlite3_txn_state() interface for reporting on the current transaction state of the database connection. * Enhance recursive common table expressions to support two or more recursive terms as is done by SQL Server, since this helps make queries against graphs easier to write and faster to execute.\ * Improved error messages on CHECK constraint failures. * The .read dot-command now accepts a pipeline in addition to a filename. * Added options --data-only and --nosys to the .dump dot-command. * Added the --nosys option to the .schema dot-command. * Table name quoting works correctly for the .import dot-command. * The generate_series(START,END,STEP) table-valued function extension is now built into the CLI. * The .databases dot-command now show the status of each database file as determined by sqlite3_db_readonly() and sqlite3_txn_state(). * Added the --tabs command-line option that sets .mode tabs. * The --init option reports an error if the file named as its argument cannot be opened. The --init option also now honors the - -bail option. * Improved estimates for the cost of running a DISTINCT operator. * When doing an UPDATE or DELETE using a multi-column index where only a few of the earlier columns of the index are useful for the index lookup, postpone doing the main table seek until after all WHERE clause constraints have been evaluated, in case those constraints can be covered by unused later terms of the index, thus avoiding unnecessary main table seeks. * The new OP_SeekScan opcode is used to improve performance of multi-column index look-ups when later columns are constrained by an IN operator. * The BEGIN IMMEDIATE and BEGIN EXCLUSIVE commands now work even if one or more attached database files are read-only. * Enhanced FTS5 to support trigram indexes. * Improved performance of WAL mode locking primitives in cases where there are hundreds of connections all accessing the same database file at once. * Enhanced the carray() table-valued function to include a single-argument form that is bound using the auxiliary sqlite3_carray_bind() interface. * The substr() SQL function can now also be called "substring()" for compatibility with SQL Server. * The syntax diagrams are now implemented as Pikchr scripts and rendered as SVG for improved legibility and ease of maintenance. ==== unbound ==== Version update (1.12.0 -> 1.13.0) Subpackages: libunbound8 unbound-anchor - update to 1.13.0 Features - Pass the comm_reply information to the inplace_cb_reply* functions during the mesh state and update the documentation on that. - Fix #330: [Feature request] Add unencrypted DNS over HTTPS support. This adds the option http-notls-downstream: yesno to change that, and the dohclient test code has the -n option. - Merge PR #228 : infra-keep-probing option to probe hosts that are down. Add infra-keep-probing: yes option. Hosts that are down are probed more frequently. With the option turned on, it probes about every 120 seconds, eventually after exponential backoff, and that keeps that way. If traffic keeps up for the domain. It probes with one at a time, eg. one query is allowed to probe, other queries within that 120 second interval are turned away. - Merge PR #313 from Ralph Dolmans: Replace edns-client-tag with edns-client-string option. - Merge PR #283 : Stream reuse. This implements upstream stream reuse for performing several queries over the same TCP or TLS channel. - Fix to connect() to UDP destinations, default turned on, this lowers vulnerability to ICMP side channels. Option to toggle udp-connect, default is enabled. Bug Fixes - Fix #319: potential memory leak on config failure, in rpz config. - Fix dnstap socket and the chroot not applied properly to the dnstap socket path. - Fix warning in libnss compile, nss_buf2dsa is not used without DSA. - Fix #323: unbound testsuite fails on mock build in systemd-nspawn if systemd support is build. - Fix for python reply callback to see mesh state reply_list member, it only removes it briefly for the commpoint call so that it does not drop it and attempt to modify the reply list during reply. - Fix that if there are on reply callbacks, those are called per reply and a new message created if that was modified by the call. - Free up auth zone parse region after use for lookup of host - Merge PR #326 from netblue30: DoH: implement content-length header field. - DoH content length, simplify code, remove declaration after statement and fix cast warning. - Fix that if there are reply callbacks for the given rcode, those are called per reply and a new message created if that was modified by the call. - Fix that the out of order TCP processing does not limit the number of outstanding queries over a connection. - Fix python documentation warning on functions.rst inplace_cb_reply. - Log ip address when http session recv fails, eg. due to tls fail. - Fix to set the tcp handler event toggle flag back to default when the handler structure is reused. - Clean the fix for out of order TCP processing limits on number of queries. It was tested to work. - Fix that http settings have colon in set_option, for http-endpoint, http-max-streams, http-query-buffer-size, http-response-buffer-size, and http-nodelay. - Fix memory leak of https port string when reading config. - local-zone regional allocations outside of chunk - Merge PR #324 from James Renken: Add modern X.509v3 extensions to unbound-control TLS certificates. - Fix for PR #324 to attach the x509v3 extensions to the client certificate. - Fix #327: net/if.h check fails on some darwin versions; contribution by Joshua Root. - Fix #320: potential memory corruption due to size miscomputation upton custom region alloc init. - Fix #333: Unbound Segmentation Fault w/ log_info Functions From Python Mod. - Fix that minimal-responses does not remove addresses from a priming query response. - In man page note that tls-cert-bundle is read before permission drop and chroot. - Fix #341: fixing a possible memory leak. - Fix memory leak after fix for possible memory leak failure. - Fix #343: Fail to build --with-libnghttp2 with error: 'SSIZE_MAX' undeclared. - Fix for #303 CVE-2020-28935 : Fix that symlink does not interfere with chown of pidfile. - Fix #347: IP_DONTFRAG broken on Apple xcode 12.2. - Fix #350: with the AF_NETLINK permission, to fix 1.12.0 error: failed to list interfaces: getifaddrs: Address family not supported by protocol. - Merge #351 from dvzrv: Add AF_NETLINK to set of allowed socket address families. - iana portlist updated. - Fix crash when TLS connection is closed prematurely, when reuse tree comparison is not properly identical to insertion. - Fix padding of struct regional for 32bit systems. - with udp-connect ignore connection refused with UDP timeouts. - Fix udp-connect on FreeBSD, do send calls on connected UDP socket. - Better fix for reuse tree comparison for is-tls sockets. Where the tree key identity is preserved after cleanup of the TLS state. - Fix memory leak for edns client tag opcode config element. - Attempt fix for libevent state in tcp reuse cases after a packet is written. - Fix readagain and writeagain callback functions for comm point cleanup. - Fix to omit UDP receive errors from log, if verbosity low. These happen because of udp-connect. - For #352: contrib/metrics.awk for Prometheus style metrics output. - Fix that after failed read, the readagain cannot activate. - Clear readagain upon decommission of pending tcp structure. - Fix compile warning for type cast in http2_submit_dns_response. - Fix when use free buffer to initialize rbtree for stream reuse. - Fix compile warnings for windows. - Fix compile warnings in rpz initialization. - Fix contrib/metrics.awk for FreeBSD awk compatibility. - Fix assertion failure on double callback when iterator loses interest in query at head of line that then has the tcp stream not kept for reuse. - Fix stream reuse and tcp fast open. ==== webkit2gtk3 ==== Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - 0001-ICU-68.1-no-longer-exposes-FALSE-and-TRUE-macros-by-.patch: ICU 68.1 no longer exposes FALSE and TRUE macros by default. ==== yast2-storage-ng ==== Version update (4.3.24 -> 4.3.27) - Fix unit tests (related to jsc#SLE-11308). - 4.3.27 - Partitioner: added management of tmpfs file systems (related to jsc#SLE-11308). - 4.3.26 - Use Yast::Kernel.propose_hibernation? (related to jsc#SLE-12280). - 4.3.25 ==== yast2-users ==== Version update (4.3.9 -> 4.3.10) - In the public key selector, allow to choose any device that contains any filesystem except swap and squashfs (bsc#1178509). - 4.3.10

3 3

Grub2 choses semi-random graphics mode
by ASSI 08 Dec '20

08 Dec '20

While troubleshooting some other issue, I've ran into this problem again that's been bugging me for a while: depending on exactly how I boot up my system it'll come up with different graphics modes in Grub2. If I either enter the BIOS setup before or enter the Grub2 command line and then exit to the menu, it will (most often) chose the native resolution of my monitor (1920x1080), otherwise it'll be stuck at 1024x768. On another system it is flipping between 800x600, 1280x1024 and whatever the native resolution of the display is (2560x1600 and lately 3840x2160). In the 4k mode a few lines on the bottom of the screen are blank (where the explanation for the keys to edit the command line go) in the graphical menu, but that's no problem so far. Now, I can force the resolution in the grub defaults file, but I'd rather have it chose the correct resolution in "auto" mode all the time. Both are Haswell IGP if that matters. I am using secure boot, so no joy with videoinfo on the grub command line… Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf rackAttack: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds

3 4

Tumbleweed Subscription
by Cameron R. Cumberland 08 Dec '20

08 Dec '20

-- Cameron R. Cumberland 柯智明只要努力,就能成功 With hard work, success is possible.

1 0

New package submission: gh
by Emily Roberts 08 Dec '20

08 Dec '20

Hello, I'm sending this email out to tell you about a new package I'm submitting to Factory from devel:tools:scm. I'm submitting gh, the official cli for GitHub. The application can interface with GitHub-specific features that git alone cannot. The package is comparable to hub, but has an entirely new codebase programmed in Go, has the official support of GitHub, and is marketed as an official interface to their platform, as opposed to a wrapper. Considering this, gh is a very worthwhile and important addition to the openSUSE distribution. The maintenance workload is minimal. So far in maintaining the package, an upgrade only requires running the service file to update the source archive and the go modules included in vendor.tar.gz. Aside from the switch from tar_scm to obs_scm for fetching the source from the official repo, there have been no significant issues. I would be happy to take on maintainership myself, as a newbie it will probably help me be able to maintain further packages in future. I will be submitting a SR for this package to Factory shortly after this message is sent. OBS: https://build.opensuse.org/package/show/devel:tools:scm/gh <https://build.opensuse.org/package/show/devel:tools:scm/gh> Upstream: https://cli.github.com/ <https://cli.github.com/> Git repo: https://github.com/cli/cli <https://github.com/cli/cli> - Emily (nopeinomicon)

11 23

testing systemd-homed
by Damian Ivanov 08 Dec '20

08 Dec '20

Hi, I have very positive experience using systemd-homed on Fedora. Is it time to enable it on openSUSE so people can test it? Br, Damian

1 0

New package introduction into Factory: Radicale
by Szőts Ákos 08 Dec '20

08 Dec '20

Dear list members, As per [1], I would like a new package to be included in Factory, Radicale. Radicale [2] is a small but powerful CalDAV (calendars, to-do lists) and CardDAV (contacts) server written in Python. Its development [3] is ongoing and in the last 8 years, since I'm maintaining its .spec file and using it on my local computer, served me well. As far as I can tell, it's mature enough since in the previous years I had no noticeable hiccups with it. Maintenance of the package is nice since the author responds to tickets and quickly fixes the urgent ones. Previously applied patches went upstream and are no longer needed to be carried on. It was requested by multiple parties that this package should be upstreamed to Factory, therefore I think it's worth to share this software with greater audience :). Its developer project is at network at [4]. After sending this e-mail, I'll create a submit request for inclusion to Factory. Thank you and all the best, Ákos [1]: https://en.opensuse.org/ openSUSE:How_to_contribute_to_Factory#How_to_add_a_new_package_to_Factory [2]: https://radicale.org [3]: https://github.com/Kozea/Radicale [4]: https://build.opensuse.org/package/show/network/Radicale

1 0

openSUSE Feature Requests Review 20201207
by Lubos Kocman 07 Dec '20

07 Dec '20

Virtual meeting takes place on Mondays 14:00 UTC https://meet.opensuse.org/FeatureRequests All meeting minutes can be found here https://etherpad.opensuse.org/p/FeatureReview-meeting More information: https://en.opensuse.org/Portal:Jump/Policy/CommunitySLEChangeRequests openSUSE TAM Board: https://jira.suse.com/secure/RapidBoard.jspa?rapidView=1664&view=detail Visible to Leap contributors who requested access. Attendees: lkocman, Dominique, Neal To Do https://jira.suse.com/browse/OPENSUSE-13 Raspberry Pi 400 Support (TODO) In Progress * https://jira.suse.com/browse/OPENSUSE-6 - Add python 3.8 support Pinged SLE RM for an update. It seems that we'll have 3.9 instead. Target seems to be Leap 15.3 Beta. * https://jira.suse.com/browse/OPENSUSE-3 - DNF for SLE and Leap Next Pending PM feedback. * https://jira.suse.com/browse/OPENSUSE-9 - add authselect for managing auth stack configuration Neal will reach out to security team. Testing All of these are already merged, but simply blocked on having a successful Leap 15.3 build based on SLE 15 SP3 binaries: https://openqa.opensuse.org/group_overview/50 (last build was still based on SP2: Update). All of these should be hopefully resolved until next meeting. * https://jira.suse.com/browse/OPENSUSE-5 - Update Remmina to 1.4.8 Leap 15.3 keeps old remmina fork. I'll figure out why. * https://jira.suse.com/browse/OPENSUSE-7 - Please update glibc to 2.29 or newer Updated to 2.31, can be seen here https://build.opensuse.org/package/show/openSUSE:Leap:15.3/glibc * https://jira.suse.com/browse/OPENSUSE-4 - Hardware enablement printing/scanners: Update Sane-backend to 1.0.29 * https://jira.suse.com/browse/OPENSUSE-8 - Update Apparmor to 2.13.4 * https://jira.suse.com/browse/OPENSUSE-10 - Update libcdio required by python-pycdio 2.1.0 and whipper Done https://jira.suse.com/browse/OPENSUSE-11 - rpm: enable pythondistdeps (Rejected, we would not be able to rebuild all python rpms, and we'd be simply stuck with hybrid anyway) Discussion Neal mentioned that SR redirection doesn't seem to work properly for some of SLE packages. We found out that we have these same packages available in Both SP2:GA and SP3 Backports. lubos: We're looking into it. Email was sent to right people.

1 0

AppArmor 3.0.1 - profile for /usr/lib/dovecot/script-login broken?
by Arjen de Korte 07 Dec '20

07 Dec '20

The update from Apparmor 3.0.0 -> 3.0.1 seems to break here on the rule for /usr/lib/dovecot/script-login: dec 07 10:33:59 mail apparmor.systemd[2552]: profile dovecot: has merged rule /usr/lib/dovecot/script-login with conflicting x modifiers dec 07 10:33:59 mail apparmor.systemd[2552]: ERROR merging rules for profile dovecot, failed to load dec 07 10:33:59 mail apparmor.systemd[2711]: profile dovecot: has merged rule /usr/lib/dovecot/script-login with conflicting x modifiers dec 07 10:33:59 mail apparmor.systemd[2711]: ERROR merging rules for profile dovecot, failed to load dec 07 10:33:59 mail apparmor.systemd[2513]: Error: At least one profile failed to load dec 07 10:33:59 mail systemd[1]: apparmor.service: Main process exited, code=exited, status=1/FAILURE dec 07 10:33:59 mail systemd[1]: apparmor.service: Failed with result 'exit-code'. dec 07 10:33:59 mail systemd[1]: Failed to start Load AppArmor profiles. I tried to disable this rule, but no joy: apparmor fails to load and thereby effectively took the server offline, since both dovecot and postfix were waiting for apparmor to start. :-(

1 1

FYI - repo complains that signature will run out in 13 days.
by Stakanov 07 Dec '20

07 Dec '20

Well for whom it may concern. A 13 is a number that is lucky: recupero dei metadati del repository 'Emulators:Wine' --------------------------------------------------------[-] La chiave gpg usata per firmare il file 'repomd.xml' scadrà tra 13 giorni. Repository: Emulators:Wine Nome della chiave: Emulators OBS Project <Emulators(a)build.opensuse.org> Impronta digitale della chiave: 31CFB0B6 5659B5D4 0DEEC98D DFA175A7 5104960E Chiave creata: mar 09 ott 2018 12:05:24 CEST Scadenza chiave: gio 17 dic 2020 11:05:24 CET (scade entro 13 giorni) Nome rpm: gpg-pubkey-5104960e-5bbc7d64 Which means in plain English: the gpg signature used to sign the file repomd.xml will decay / run out in 13 days. Repo: Emulators:Wine

3 2

Submit request for package qgis for inclusion in Leap 15.3
by Manfred Schwarb 06 Dec '20

06 Dec '20

Hi, qgis is quite a popular application and even the de-facto standard open source GIS software, I guess. So it would be great to have it in Leap, also. Maintainers seem to be in favor of an inclusion, too. So I put some SR's for target openSUSE:Backports:SLE-15-SP3, for qgis and its prerequisites grass and python-OWSLib: https://build.opensuse.org/request/show/853446 https://build.opensuse.org/request/show/853447 https://build.opensuse.org/request/show/853448 Thanks for consideration, Manfred

1 0

building rpms from source, while offline...
by L A Walsh 06 Dec '20

06 Dec '20

On 2020/11/08 16:59, Simon Lees wrote: > On 11/8/20 7:50 PM, L A Walsh wrote: > >> On 2020/11/07 02:51, Simon Lees wrote: >> >>> In a supported up to date system we provide all the tools required to >>> view and install source rpm's, >>> >> --- >> But not build? >> > > Not without additional effort, there are a number of macro's and > definitions here ( > https://build.opensuse.org/projects/openSUSE:Factory/prjconf ) for > example that you would need to teach rpm about if you were going to do a > build outside open build service. > ---- Where do I install these macros+definitions. While I have built _an_ rpm-4.15.1, it required quite a few changes in the spec file since the paths in the specs don't work when building from source. Most of them were related to where rpm built from (build/rpm-4.15.1), and where it was installed to (buildroot/rpm-4.15.1-7.2.x86_64) for generating and installable image. The macros, as they were were more than a little bit confused, as they failed in finding the rpm-build sources (based mostly in /lib, not /usr/lib) - and where to store them (mostly under /usr/lib, except for /lib/rpm which is moved to /usr/share/something(rpm?). At the very least, there should be an installable package to provide the macros needed to build the sources locally. It doesn't help, nor do I believe it satisfies the GPL to require a online, vendor-specific build service to make use of the provided sources. At the very least, the sources need to be usable to rebuild the product, "*offline*". That SUSE provides the OBS, is _great_, but it doesn't replace the ability to build the binaries from sources on a local machine. > Unfortunetly if you don't have a standard setup there might not be so > much we can do to help. > Much of my problems stem from my having had a standard setup with SUSE continuing to move away from such standards... :-(

1 0