openSUSE Factory September 2018

factory@lists.opensuse.org

73 participants
53 discussions

[opensuse-factory] WiFi lost aftet TW upgrade
by Vojtěch Zeisek 09 Sep '18

09 Sep '18

Hello, I upgraded (after almost a month) two different computers with TW (KDE). Both of them were/are since then unable to connect to WiFi. Connection to any encrypted WiFi network was refused with message "No credentials provided". Going to management of network connections showed that all networks have empty credentials fields. It looks like all WiFi passwords were lost. I don't know where and which format TW/KDE stores this data and if it is recoverable. It'd be nice, but not critical. On one computer, I removed one network from the list of saved networks, but re-connecting to it using usual way via NetworkManager applet didn't work. The WiFi was back in the list with missing credentials. I entered the password in the list of networks, restarted and it worked. On second computer, I'm still struggling. Regardless what I do (I re-enter password via applet or the list of networks), I'm unable to connect, the WiFi is in the list with missing credentials. I'm upgrading my installations without automatic installation of recommended packages. Any idea what could go wrong? V. -- Vojtěch Zeisek http://trapa.cz/cs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] recode dropped? OR: software.o.o claims recode for TW exists, but does not exist
by Andreas Vetter 08 Sep '18

08 Sep '18

Hi, I was looking for recode for 15.0. Since official repo does not have it, I was looking in software.o.o https://software.opensuse.org/package/recode No Official package for 15.0, but it says there is a official package for TW: The link to OBS goes to Factory, where is no package recode (any longer). The download link has a 32bit drop-down only (!), but this ends in a 404 Error. So 4 questions arise: Was recode dropped deliberately? If yes, { What is the recommended replacement - iconv? Whom do I have to contact about the stale package? } else { How should I proceed to get it back in TW and 15.0? } -- Mit freundlichen Gruessen, Andreas Vetter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] Tumbleweed - Review of the week 2018/36
by Dominique Leuenberger / DimStar 07 Sep '18

07 Sep '18

Dear Tumbleweed users and hackers, This week was not a record when it comes to the number of snapshots, but there was a steady flow. There were just a couple days where none of the staging projects was in a state to be merged into Tumbleweed – which in turn means we also did not produce a new snapshot to throw at openQA daily. So, with this in mind, the three snapshots (0831, 0903 and 0905) released during this week is actually a good number. One snapshot (0904) was discarded. Changes that are in the delivered snapshots: * dbus 1.12.10 * ucode-intel 20180807a * hexchat2.14.2 * PHP 7.2.9 * Virtualbox 5.2.18 There are still a good number of interesting changes upcoming: * glibc 2.28; the split of libxcrypt causes some build failures * OpenSSL 1.1.1 * Boost 1.68 * python 3.7 * ncurses 6.1-20180707: breaks Xen (deprecations added, Xen builds with -Werror) * Usage of the new System Role selection instead of the legacy ‘desktop selection’ Cheers, Dominique PS: for the next two weeks, Max Lin will be taking care of Tumbleweed

2 1

[opensuse-factory] broken firewall-config after tumbleweed update
by Manvendra Bhangui 07 Sep '18

07 Sep '18

Not sure which update has caused this. Today I ran yast to configure the firewall and found that it fails with the following error Traceback (most recent call last): File "/usr/bin/firewall-config", line 8093, in <module> app = FirewallConfig() File "/usr/bin/firewall-config", line 1386, in __init__ self.connection_changed() File "/usr/bin/firewall-config", line 1692, in connection_changed self.update_active_zones() File "/usr/bin/firewall-config", line 2464, in update_active_zones connection, zone ]) File "/usr/lib64/python3.6/site-packages/gi/overrides/Gtk.py", line 1245, in append return self._do_insert(parent, -1, row) File "/usr/lib64/python3.6/site-packages/gi/overrides/Gtk.py", line 1237, in _do_insert row, columns = self._convert_row(row) File "/usr/lib64/python3.6/site-packages/gi/overrides/Gtk.py", line 876, in _convert_row result.append(self._convert_value(cur_col, value)) File "/usr/lib64/python3.6/site-packages/gi/overrides/Gtk.py", line 894, in _convert_value return GObject.Value(self.get_column_type(column), value) File "/usr/lib64/python3.6/site-packages/gi/overrides/GObject.py", line 218, in __init__ self.set_value(py_value) File "/usr/lib64/python3.6/site-packages/gi/overrides/GObject.py", line 274, in set_value (py_value, type(py_value))) ValueError: Expected string but got False<class 'bool'> $ cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20180903" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20180903" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20180903" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" -- Regards Manvendra - http://www.indimail.org GPG Pub Key http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC7CBC760014D250C -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20180820 released!
by Dominique Leuenberger 07 Sep '18

07 Sep '18

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: Mesa (18.1.5 -> 18.1.6) Mesa-drivers (18.1.5 -> 18.1.6) libdrm (2.4.92 -> 2.4.93) libgit2 (0.27.3 -> 0.27.4) libstorage-ng (4.1.11 -> 4.1.15) mercurial (4.6.2 -> 4.7) nbd ntfs-3g_ntfsprogs (2016.2.22 -> 2017.3.23) ocfs2-tools osc (0.162.1 -> 0.163.0) purple-rocketchat (0.0+hg20180711 -> 0.0+hg20180817) rubygem-autoprefixer-rails (9.1.1 -> 9.1.2) spec-cleaner (1.1.0 -> 1.1.1) ucode-intel (20180703 -> 20180807) wayland (1.14.0 -> 1.15.0) xorg-x11-server (1.20.0 -> 1.20.1) === Details === ==== Mesa ==== Version update (18.1.5 -> 18.1.6) Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - update to 18.1.6 * autotools fixes for libglvnd, libgl naming, and pkgconfig * meson fixed its handling of stale symlinks wrt megadrivers * windows relaged fixes * some bug fixes for clover * plenty of egl, wayland, glx, and dri3 fixes * a couple of nir fixes * and on the driver side, radv, intel, vc4, etnaviv, swr, r600, amd, and nouveau all had a few fixes - supersedes archlinux_glvnd-fix-gl-dot-pc.patch - disabled build of libwayland-egl for factory/sle16/Leap 16 now being provided by Wayland itself and probably be removed from Mesa soon; see also https://build.opensuse.org/request/show/613048 ==== Mesa-drivers ==== Version update (18.1.5 -> 18.1.6) Subpackages: Mesa-dri Mesa-dri-nouveau Mesa-gallium Mesa-libva libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libvulkan_radeon libxatracker2 - update to 18.1.6 * autotools fixes for libglvnd, libgl naming, and pkgconfig * meson fixed its handling of stale symlinks wrt megadrivers * windows relaged fixes * some bug fixes for clover * plenty of egl, wayland, glx, and dri3 fixes * a couple of nir fixes * and on the driver side, radv, intel, vc4, etnaviv, swr, r600, amd, and nouveau all had a few fixes - supersedes archlinux_glvnd-fix-gl-dot-pc.patch - disabled build of libwayland-egl for factory/sle16/Leap 16 now being provided by Wayland itself and probably be removed from Mesa soon; see also https://build.opensuse.org/request/show/613048 ==== libdrm ==== Version update (2.4.92 -> 2.4.93) Subpackages: libdrm-devel libdrm2 libdrm_amdgpu1 libdrm_intel1 libdrm_nouveau2 libdrm_radeon1 - Upate to version 2.4.93: + amdgpu: make sure to set CLOEXEC on duplicated FDs + xf86drm: drmGetDevice2: error out if the fd has unknown subsys + xf86drm: introduce drm_device_has_rdev() helper + xf86drm: Fold drmDevice processing into process_device() helper + xf86drm: Allocate drmDevicePtr's on stack + xf86drm: introduce a get_real_pci_path() helper + xf86drm: Add drmDevice support for virtio_gpu + tests/drmdevices: install alongside other utilities + tests/drmdevice: add a couple of printf headers + drmdevice: convert the tabbed output into a tree + drmdevice: print the correct host1x information + amdgpu: Take a lock before removing devices from fd_tab hash table. + amdgpu/util_hash_table: Add helper function to count the number of entries in hash table + amdgpu: Destroy fd_hash table when the last device is removed. + intel: Introducing Whiskey Lake platform + intel: Introducing Amber Lake platform + xf86drm: Be sure to closedir before return + amdgpu: don't call add_handle_to_table for KMS BO exports + amdgpu: add amdgpu_bo_handle_type_kms_noimport + xf86drm: Fix error path in drmGetDevice2 + Always pass O_CLOEXEC when opening DRM file descriptors + Revert "amdgpu: don't call add_handle_to_table for KMS BO exports" + freedreno: add user ptr to fd_ringbuffer + freedreno: add fd_ringbuffer_new_object() + freedreno: small cleanup + freedreno: slight reordering + freedreno/msm: "stateobj" support ==== libgit2 ==== Version update (0.27.3 -> 0.27.4) - libgit2 0.27.4: * fix out-of-bounds reads when processing smart-protocol "ng" packets (bsc#1104641) ==== libstorage-ng ==== Version update (4.1.11 -> 4.1.15) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - Translated using Weblate (Catalan) - 4.1.15 - Translated using Weblate (Czech) - 4.1.14 - Translated using Weblate (Chinese (Taiwan)) - 4.1.13 - Translated using Weblate (Italian) - 4.1.12 ==== mercurial ==== Version update (4.6.2 -> 4.7) Subpackages: mercurial-lang - Mercurial 4.7 This is a regularly-scheduled quarterly feature release and has it's own release notes page which can be found here: [Full release notes](https://www.mercurial-scm.org/wiki/Release4.7) ==== nbd ==== - Add firewalld service file - Fix some rpmlint warnings: * 0001_fix_setgroup.patch (gh#NetworkBlockDevice/nbd#79) * Workaround macro-in-comment (rpmlint bug) ==== ntfs-3g_ntfsprogs ==== Version update (2016.2.22 -> 2017.3.23) Subpackages: ntfs-3g ntfsprogs - Rebuild configure to pick up the updated AC_HEADER_MAJOR - Use %license for COPYING, COPYING.LIB - Rename %soname to %sover to better reflect its use - Switch GCC version from 4.3 to 4.8 for SLES 11 - Update to version 2017.3.23 * Delegated processing of special reparse points to external plugins * Allowed kernel cacheing by lowntfs-3g when not using Posix ACLs * Enabled fallback to read-only mount when the volume is hibernated * Made a full check for whether an extended attribute is allowed * Moved secaudit and usermap to ntfsprogs (now ntfssecaudit and ntfsusermap) * Enabled encoding broken UTF-16 into broken UTF-8 * Autoconfigured selecting <sys/sysmacros.h> vs <sys/mkdev> * Allowed using the full library API on systems without extended attributes support * Fixed DISABLE_PLUGINS as the condition for not using plugins * Corrected validation of multi sector transfer protected records * Denied creating/removing files from $Extend * Returned the size of locale encoded target as the size of symlinks ==== ocfs2-tools ==== - fix pre/post/preun/postun scripts when systemd_enabled - insserv_prereq is only needed when !systemd_enabled - run fillup to actually provision /etc/sysconfig/o2cb ==== osc ==== Version update (0.162.1 -> 0.163.0) - 0.163.0 * add sendsysrq command (requires OBS 2.10) * add addcontainers command (requires OBS 2.10) * enable statistics for local builds * add new options to diff command: - -unexpand for local diffs only (bsc#1089025) - -meta for diffing meta files * add support for podman/buildag engine (docker variation) * support realname in .changes files * fix DISTURL checkout for package containers using a multibuild flavor * Disable ssl session resumption ==== purple-rocketchat ==== Version update (0.0+hg20180711 -> 0.0+hg20180817) Subpackages: libpurple-plugin-rocketchat pidgin-plugin-rocketchat - Update to version 0.0+hg20180817: * Allow to override build date with SOURCE_DATE_EPOCH. ==== rubygem-autoprefixer-rails ==== Version update (9.1.1 -> 9.1.2) - updated to version 9.1.2 * Fix `autoprefixer --info` in new Node.js. * Fix ExecJS runtime warning. ==== spec-cleaner ==== Version update (1.1.0 -> 1.1.1) - Version update to 1.1.1 bsc#1099674: * Fix help message not working * Make libexecdir opt-in rather than opt-out * Account for LICENCE string not just LICENSE * Warn about direct qmake/meson usage * Use https when mentioning bugzilla in header * Use tuples on some places rather than lists ==== ucode-intel ==== Version update (20180703 -> 20180807) - Update to 20180807 release, for the listed CPU chipsets this fixes CVE-2018-3640 (Spectre v3a) CVE-2018-3639 (Spectre v4). (bsc#1104134 bsc#1087082 bsc#1087083) Processor Identifier Version Products Model Stepping F-MO-S/PI Old->New - --- new platforms ---------------------------------------- WSM-EP/WS U1 6-2c-2/03 0000001f Xeon E/L/X56xx, W36xx NHM-EX D0 6-2e-6/04 0000000d Xeon E/L/X65xx/75xx BXT C0 6-5c-2/01 00000014 Atom T5500/5700 APL E0 6-5c-a/03 0000000c Atom x5-E39xx DVN B0 6-5f-1/01 00000024 Atom C3xxx - --- updated platforms ------------------------------------ NHM-EP/WS D0 6-1a-5/03 00000019->0000001d Xeon E/L/X/W55xx NHM B1 6-1e-5/13 00000007->0000000a Core i7-8xx, i5-7xx; Xeon L3426, X24xx WSM B1 6-25-2/12 0000000e->00000011 Core i7-6xx, i5-6xx/4xxM, i3-5xx/3xxM, Pentium G69xx, Celeon P45xx; Xeon L3406 WSM K0 6-25-5/92 00000004->00000007 Core i7-6xx, i5-6xx/5xx/4xx, i3-5xx/3xx, Pentium G69xx/P6xxx/U5xxx, Celeron P4xxx/U3xxx SNB D2 6-2a-7/12 0000002d->0000002e Core Gen2; Xeon E3 WSM-EX A2 6-2f-2/05 00000037->0000003b Xeon E7 IVB E2 6-3a-9/12 0000001f->00000020 Core Gen3 Mobile HSW-H/S/E3 Cx/Dx 6-3c-3/32 00000024->00000025 Core Gen4 Desktop; Xeon E3 v3 BDW-U/Y E/F 6-3d-4/c0 0000002a->0000002b Core Gen5 Mobile HSW-ULT Cx/Dx 6-45-1/72 00000023->00000024 Core Gen4 Mobile and derived Pentium/Celeron HSW-H Cx 6-46-1/32 00000019->0000001a Core Extreme i7-5xxxX BDW-H/E3 E/G 6-47-1/22 0000001d->0000001e Core i5-5xxxR/C, i7-5xxxHQ/EQ; Xeon E3 v4 SKL-U/Y D0 6-4e-3/c0 000000c2->000000c6 Core Gen6 Mobile BDX-DE V1 6-56-2/10 00000015->00000017 Xeon D-1520/40 BDX-DE V2/3 6-56-3/10 07000012->07000013 Xeon D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19 BDX-DE Y0 6-56-4/10 0f000011->0f000012 Xeon D-1557/59/67/71/77/81/87 APL D0 6-5c-9/03 0000002c->00000032 Pentium N/J4xxx, Celeron N/J3xxx, Atom x5/7-E39xx SKL-H/S/E3 R0 6-5e-3/36 000000c2->000000c6 Core Gen6; Xeon E3 v5 GLK B0 6-7a-1/01 00000022->00000028 Pentium Silver N/J5xxx, Celeron N/J4xxx KBL-U/Y H0 6-8e-9/c0 00000084->0000008e Core Gen7 Mobile CFL-U43e D0 6-8e-a/c0 00000084->00000096 Core Gen8 Mobile KBL-H/S/E3 B0 6-9e-9/2a 00000084->0000008e Core Gen7; Xeon E3 v6 CFL-H/S/E3 U0 6-9e-a/22 00000084->00000096 Core Gen8 CFL-H/S/E3 B0 6-9e-b/02 00000084->0000008e Core Gen8 Desktop ==== wayland ==== Version update (1.14.0 -> 1.15.0) Subpackages: libwayland-client0 libwayland-cursor0 libwayland-egl1 libwayland-server0 - devel package: add Provides/Obsoletes for libwayland-egl-devel for the devel files, which were previously built by Mesa; see also https://build.opensuse.org/request/show/613048 - Update wayland.keyring to contain Derek Foreman derekf(a)osg.samsung.com public key. - Update to new upstream release 1.15 * wl_subcompositor.get_subsurface is now documented to be double buffered. * wayland-scanner can now generate either public or private symbols. * libwayland-egl is now part of libwayland (and will presumably be removed Mesa soon) * The WAYLAND_DISPLAY environment variable can now contain absolute paths (where previously it was prefixed by XDG_RUNTIME_DIR) - anything that reads WAYLAND_DISPLAY outside of libwayland will have to deal with that change independently. - Remove unneeded fdupes dependency/handling - Add COPYING - Update to new upstream release 1.14 * wayland-util: do not export the wl_map_* API * wayland-server: Remove unused members from struct wl_client - Drop 0001-tests-Fix-new-ID-type-handling-in-argument_from_va_l.patch (integrated) - wayland support in Mesa 17 requires wayland >= 1.11 [fate#321223] - Add 0001-tests-Fix-new-ID-type-handling-in-argument_from_va_l.patch to resolve testsuite failure on s390x [boo#1029452] - Update to new upstream release 1.13.0 * Add some API for controlling the visibility of globals. - Drop wayland-wl_array_Set_data_to_invalid_address_after_free.patch (no longer needed) - Add wayland-wl_array_Set_data_to_invalid_address_after_free.patch: Crash fix patch from upstream git. - Update to new upstream release 1.12.0 * The core protocol documentation has received numerous refinements to improve its clarity and consistency. Along with this, many blank areas of the protocol documentation have been fleshed out. * A new wl_display_add_protocol logger API provides a new interactive way to debug requests; along with this are new APIs for examining clients and their resources. This is analogous to using WAYLAND_DEBUG=1, but more powerful since it allows run time review of log data such as through a UI view. * There have been improvements to how the protocol XML scanner handles version identification in protocol headers. This enables better detection and fallback handling when compositors and clients support differing versions of their protocols. - Update to new upstream release 1.11.0 * Final version bump. - Update to new upstream release 1.10.93 * Proxy wrappers were introduced, which help avoid race conditions in multi-threaded clients. A new "proxy wrapper" API is added for the client to use when sending requests which does not proxy events. This helps avoid one thread causing events to be dropped before they can be handled by other threads. * shm: When undergoing a resize operation while external users are holding references to it, the resize is deferred to prevent leading to a crash; Wayland now counts external and internal users differently to permit tracking this. * Support for cross-interface enum attributes is added. - Update to new upstream release 1.10.0 * Drag and drop actions are now added to the Wayland API * Frame events group pointer events together * A buffer damage request, wl_surface.damage_buffer, allows applications a more convenient way to communicate portions of a surface needing to be re-rendered. * Shared memory buffers now do reference counting to allow compositors to delay releasing the memory pools. * New APIs are provided for getting and setting the socket file descriptor Wayland servers use to communicate with their clients. - Update to new upstream release 1.9.0 * This release brings fixes and modest refactoring. - License was changed from MIT X11 to MIT Expat upstream. - Update to new upstream release 1.8.1 * This is just a brown paper bag release. In rolling the wayland 1.8.0 distribution tarball some files were set to read-only. This rectifies that. There are no file content changes. - Update to new upstream release 1.8.0 * Wayland 1.8 splits the client and server header files into core and generated protocol. The core headers can be included as wayland-client-core.h and wayland-server-core.h. The scanner also now supports a --include-core-only option, which causes generated code to use only these core headers. - Update to new upstream release 1.7.0 * Documentation updates - Update to new upstream prerelease 1.6.92 * More documentation updates - Update to new upstream prerelease 1.6.91 * The codebase's doxygen documentation was revamped - Update to new upstream release 1.6.1 * Maintenance release for Wayland 1.6, with a handful of fixes pulled from the 1.7 tree that improve handling of several error situations between server and clients. - Update to new upstream release 1.6 * Add error enums to wl_surface. * Add keyboard repeat information to wl_keyboard protocol. * Error handling additions in libwayland-client: when a protocol error happens, the program can query more detailed information about the error. * New wl_display_add_socket_auto() in libwayland-server: automatically find a free socket name. * Add wl_display_roundtrip_queue(): blocking round-trip on a custom queue. * Stop exposing wl_display global. Turns out binding to the global would have triggered bugs, and there was no proper use for it. - Update to version 1.5.93 * Bug fixes - Update to version 1.5.92: * wayland-client: Initialize newly created wl_proxys to zero. * client: add display_wakeup_threads function. * Doc and test updates / fixes. - Update to new upstream release 1.5.0 * Use an internal event queue for wl_display events. This allows the client library to dispatch delete_id and error events immediately, even if the default queue is not dispatched. - Update to new upstream release 1.4.0 * SHM Buffer SIBGUS protection * Subsurfaces protocol moved to wayland - Remove wayland-1.3.93-resourcestest.patch - Version bump to 1.3.93: * Various bugfixes to another RC release - Add patch wayland-1.3.93-resourcestest.patch fixing tests from upstream git - Cleanup the spec with spec-cleaner - Always run tests do not conditionalize them. They wether fail or not - Add missing dep on xsltproc as per configure - Update to new upstream release 1.3.91 * protocol: add sub-surfaces to the core - Update to version 1.3.0: * More pixel formats for wl_shm, such as RGB565 * Multi resource support. * Support for language bindings * Release requests for wl_pointer, wl_keyboard and wl_touch - skip testsuite on QEMU Userspace build (fixes hang on ARMv6 build) - Update to new upstream release 1.2.1 * Bug fixes and documentation tweaks * Touch support for toytoolkit and other clients. - Update to new upstream release 1.2.0 * This release provides a stable wayland-server API and improved thread safety and relaxed thread-model assumptions in libwayland-client. * New features include color management, a subsurface protocol, output scaling (HiDPI), Rasperry Pi backend and renderer, and multi-seat support. - Update to new upstream release 1.1.0 * Optimize damage handling when moving surfaces in and out of planes * Touch screen calibration feature and client * Proper support for popup surfaces - Use a header location that does not change with every release - Update to new upstream release 1.0.6 * protocol: remove implicit attach semantics * client: Invoke new_id closure arguments as pointers instead of integers * client: Check reference count only for destroyed proxies * client: add wl_proxy_get_class() * scanner: Fix 'destroy)' typo in check for destroy request presence * scanner: remove list_length in favor of wl_list_length * connection.c: Align pointer extra storage correctly - Update to new upstream release 1.0.3 * a couple of documentation fixes * the test suite now cleans up its temporary files - Update to new upstream release 1.0.2 * new wl_display_dispatch_queue_pending() entry point that allows avoiding triple buffering in Mesa * avoid premature exit and potential memory corruption in wl_display_roundtrip() - Put all include files in a separate directory so that we see when downstream users forget to use pkgconfig - Add initial baselibs.conf With this we can provide 32bit x86_64.rpm - Update to new upstream release 1.0.1 * Supply a fix for out-of-order delete_id events, which allows to fix a crash that happens during EGLSurface destruction. - license update: HPND http://spdx.org/licenses/HPND#licenseText - Update to new upstream release 1.0 * more consistent error checking - Update to version 0.99.0 * responsible error handling * well-defined atomic update mechanism and event dispatching (thread safe) * Some API breakage - Initial package for build.opensuse.org (0.85) ==== xorg-x11-server ==== Version update (1.20.0 -> 1.20.1) Subpackages: xorg-x11-server-sdk xorg-x11-server-wayland - Update to version 1.20.1: This bugfix release fixes several issues in RANDR, Xwayland, glamor, the modesetting driver, and elsewhere. - Packaging changes: + Adapt patch N_Install-Avoid-failure-on-wrapper-installation.patch to work with the new version + Remove patch U_Xext-shm-Refuse-to-work-for-remote-clients.patch + Remove patch U_modesetting-use-drmmode_bo_import-for-rotate_fb.patch + Remove patch u_modesetting-Fix-cirrus-24bpp-breakage.patch + Remove patch U_exa-use-picturematchformat.patch - U_exa-use-picturematchformat.patch * Fix breakage of Xfce (bsc#1102979) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] Unable to install packages from home project repos
by John Paul Adrian Glaubitz 06 Sep '18

06 Sep '18

Hi! I have updated the Python Azure SDK for devel:languages:python:azure in a branch of my home project. Before submitting the updated packages to d:l:p:azure, I wanted to perform a test installation. For some reason, zypper is now declaring packages from my home repository as not installable when I try to install the SDK: suse-laptop:~ # zypper in python3-azure-sdk Loading repository data... Reading installed packages... Resolving package dependencies... Problem: python3-azure-sdk-4.0.0-4.1.noarch requires python3-azure-batch >= 5.0.0, but this requirement cannot be provided not installable providers: python3-azure-batch-5.0.0-4.1.noarch[home_glaubitz_branches_devel_languages_python_azure] Solution 1: do not install python3-azure-sdk-4.0.0-4.1.noarch Solution 2: break python3-azure-sdk-4.0.0-4.1.noarch by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): If I add python3-azure-batch-5.0.0-4.1.noarch to the zypper command line, it will complain about the next package. And I assume, if I manually pass all the 100+ packages to the command line, zypper will finally install them. Does anyone know how to resolve the issue "not installable providers"? Adrian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] What is the process to triguer builds of TW
by Normand 06 Sep '18

06 Sep '18

.I noticed today in OBS that * TW PowerPC project do not have pending builds, and ttm is reporting new_snapshot 20180904 same as current_snapshot. * for TW project, ttm is reporting new_snapshot 20180905 same as current_snapshot. What is the process to trigger a new snapshot for openSUSE:Factory and it's subprojects openSUSE:Factory:ARM and openSUSE:Factory:PowerPC ? Would it be possible to trigger them in parallel ? --- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] looking for volunteer projects to test reproducible builds
by Bernhard M. Wiedemann 05 Sep '18

05 Sep '18

https://en.opensuse.org/openSUSE:Reproducible_Builds now has instructions with the 4 rpm macros to put into a prjconf of a OBS project to allow for bit-identical reproducible builds of rpms. I would love to see some real-world adoption of those, so we can be more confident, when we enable it later for the main openSUSE distributions. Thus I'm looking for volunteer projects to test bit-identical reproducible builds. In detail these 4 rpm macros are: 1 %source_date_epoch_from_changelog Y is already active in Tumbleweed and 15.0 since 2017-05 so should not make a difference. 2 %clamp_mtime_to_source_date_epoch Y is the one most likely to cause trouble. We added a patch to python to fix it for .pyc files. But there is freepascal and maybe other formats that embed mtimes and might expect them to match what other files have in the filesystem. If you find+file such issues, be sure to CC me on the bug. 3+4 %use_source_date_epoch_as_buildtime Y %_buildhost reproducible those just override rpm header fields, so they will not affect the packaged software, but there might be surprised users or scripts that handle packages and look at Build Date or Build Host fields. Older distributions will probably just ignore these macros because its rpm does not know about it. Please tell me, if you are interested or need help debugging/fixing issues. If you are interested in the topic, you can also have a look at the linked resources in the wiki. E.g. theunreproduciblepackage is a fun place to start and see some surprising ways how package-builds were unreproducible. Ciao Bernhard M.

1 0

[opensuse-factory] New Tumbleweed snapshot 20180903 released!
by Dominique Leuenberger 05 Sep '18

05 Sep '18

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: akonadi-server attr (2.4.47 -> 2.4.48) bash-completion (2.7 -> 2.8) bzip2 dbus-1 (1.12.6 -> 1.12.10) dbus-1-x11 (1.12.6 -> 1.12.10) grub2 hexchat (2.14.1 -> 2.14.2) kcmutils kdevelop5 krita libHX (3.22 -> 3.23) libqt5-qtbase pam postfix python-kiwi (9.16.6 -> 9.16.12) rpm-config-SUSE rtl8812au (5.2.20_k4.18.5_1 -> 5.2.20.2_k4.18.5_1) schily (2018.05.25 -> 2018.08.24) valgrind xfce4-branding-openSUSE xmlgraphics-commons (2.1 -> 2.3) xmlgraphics-fop === Details === ==== akonadi-server ==== Subpackages: akonadi-server-lang akonadi-server-sqlite libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiPrivate5 libKF5AkonadiWidgets5 libKF5AkonadiXml5 - Add upstream patch to fix crashes under certain circumstances, e.g. when searching: (kde#397239) * Fix-crash-when-NotificationCollector-does-not-have-Connection.patch ==== attr ==== Version update (2.4.47 -> 2.4.48) Subpackages: libattr1 libattr1-32bit - Replace unspecific boilerplate summary from years ago. - Remove obsolete Obsolete lines - Drop static subpackage, nothing in TW depends on it Deb/RH do not provide it either - Rely on simple upstream make install target - Run tests - Update to 2.4.48: * Provide default xattr.conf * Update buildsystem to reflect current autotools state * Small test updates * Remove various deprecated sections like attr/attr.h - Update keyring, Mike Frysinger released this version - Add patch to have tests working with newer perls: * 0001-attr-2.4.48-test-suite-perl.patch ==== bash-completion ==== Version update (2.7 -> 2.8) - Update to version 2.8: * Comma separated opt arg completion improvements * Protect _known_hosts_real from user input treated as options * Protect shopt reset from non-default $IFS * Add support for .lz4 extension to file-roller (#158) * Add support for .lzo extension (--lzop) to tar (#155) * Bump copyright years to -2018 * README.md: Whitespace cleanup * Whitespace * __expand_tilde_by_ref: Eval tilde expansion only, simplify * __load_completion: Code cleanup * __load_completion: Load "xspec" completions dynamically too * _avaiable_interfaces: Get rid of eval * _expand: Reuse __expand_tilde_by_ref and _tilde logic, clean up * _known_hosts_real: Add option to filter IPv4 and IPv6 addresses * _known_hosts_real: Document -a better * alias: Fix completion followed by = (#146) * apt-get: Complete *.deb on install if argument contains a slash * aptitude-curses: Use aptitude completion * aptitude: Add keep to commands list (Debian: #867587) * bzip2, gzip, and other compressors: Use _tilde instead of _expand * ccze: New completion * cryptsetup: Update option lists * curl: Fix -x etc option argument hostname completion * dd, find, gcc: Remove unnecessary tilde expansion * dd: Omit space only when offering one completion ending with = * dpkg-query: Fix -W/--show completion * dpkg: Add -V/--verify arg completion * dpkg: Complete --vextract on deb files * dpkg: Fix man page section in comment * ebtables: new completion (#150) * flake8: Various option arg completion improvements * geoiplookup: New completion * getconf: New completion * groupdel: Parse and handle long options * info, man, rsync: Defer _expand invocation * iptables: Avoid stderr trashing when invoked as non-root * iptables: Parse options from --help output * iptables: Use invoked command instead of hardcoded "iptables" * java: Complete *.war * kldunload: Increase robustness of compgen filters (#185) * kldunload: Show modules with digits * ktutil: Don't leak i and command environment variables * lftp: Support ~/.local/... bookmark location (#144) * lowriter,localc etc: Use corresponding oo* completions * lspci: New completion * lsscsi: New completion * lsusb: New completion * make-changelog.py: Use python3 * make: Pass script to sed as parameter instead of using process substitution * man: Don't use $MANPATH directly (#161) * mkdir: Complete files without appending space * mkdir: Complete on files in addition to dirs * mplayer: Disable user config when parsing options * nproc: New completion * oggdec: New completion * openssl: Add completion for the genpkey, pkey, pkeyparam, and pkeyutl commands * perltidy: New completion * ping*,ssh,scp,sftp,tracepath6: Filter IPv4/IPv6 literal addresses * pv: New completion * pycodestyle: New completion * pylint: Install for pylint-2 and pylint-3 too * pylint: Invoke python3 to search for modules if command contains 3 * python: Support completing dotted module hierarchies * radvdump: New completion * reportbug: Add -A/--attach arg completion * reportbug: Don't hardcode option lists, split option args at = * rfkill: Rename to _rfkill to avoid conflict with util-linux >= 2.31 * ri: Fix integrated ri 1.8 class completion * ssh,ssh-add,ssh-keygen: Complete pkcs11 options with *.so * ssh-keygen: Add -E arg completion * ssh: Add -J/ProxyJump completion * ssh: Declare $prefix closer to use * test suite: Add basic hid2hci and munin-node-configure test cases * test suite: Add bunch of man and MANPATH test cases * test suite: Add bunch of missing basic test cases * test suite: Add info and pinfo option test cases * test suite: Drop no longer needed fedoradev /usr/bin/which workaround * test suite: Enable wine in ubuntu14 * test suite: Install aptitude in ubuntu14 container * test suite: Limit amount of info and pinfo test output * test suite: Limit amount of output from process name completion * test suite: Limit number of screen -T completion matches * test suite: Make man test subject names less generic * test suite: Skip fedoradev GPG checks at least for now * test suite: Some more mplayer and mencoder coverage * test suite: Support overriding default match buffer size (#141) * test suite: man cleanup * test/docker: Tweak work dir, add bash as default cmd * test/unit: Whitespace tweaks * test: Add "postconf -" test case * test: Add assert_complete_homedir, use in dpkg and ls * test: Add files to test older ri with * test: Add some _expand unit tests * test: Add some comments regarding bash init in library.exp * test: Fix getting username in non-login shells * test: Ignore duplicates in find_unique_completion_pair list * test: Remove things moved to library.exp from bashrc * test: Try to skip postconf variable test on broken postfix configs altogether * test: Use prebuilt docker hub bash-completion images * test: Work around broken centos/fedora postfix config in non-IPv6 setup * test: dpkg,ls,_tilde: Skip gracefully if no uniq user for completion is found * test: run bash with --norc to avoid system bashrc * tox: Avoid stderr spewage when -e invoked without tox.ini * tox: Complete comma separated -e arguments * tox: Include ALL in -e completions * tox: New completion (#163) * tox: Remove spurious executable bits * unzip, zipinfo: Associate *.gar (#165) * uscan: Don't leak cword and words environment variables * vpnc: Add some option argument (non)completions * vpnc: Improve config completions * xdg-mime,xdg-settings: Fix inclusion in tarball * xdg-mime: New completion * xdg-settings: New completion * xine etc, ogg123, mplayer -audiofile: Associate with *.oga * xm: Don't leak args and commands environment variables ==== bzip2 ==== Subpackages: libbz2-1 libbz2-1-32bit libbz2-devel - Replace the URL. The bzip.org owner changed. - Remove the URL from the 'Source' line. The 1.0.6 version is not available. - Run spec-cleaner. ==== dbus-1 ==== Version update (1.12.6 -> 1.12.10) Subpackages: libdbus-1-3 libdbus-1-3-32bit - Update to 1.12.10 * Changelog for 1.12.10 ? Prevent reading up to 3 bytes beyond the end of a truncated message. This could in principle be an information leak or denial of service on the system bus, but is not believed to be exploitable to crash the system bus or leak interesting information in practice. (fd.o #107332, Simon McVittie) ? Fix build with gcc 8 -Werror=cast-function-type (fd.o #107349, Simon McVittie) ? Fix warning from gcc 8 about suspicious use of strncpy() when populating struct sockaddr_un (fd.o #107350, Simon McVittie) ? Fix a minor memory leak when a DBusServer listens on a new address (fd.o #107194, Simon McVittie) ? Fix an invalid NULL argument to rmdir() if a nonce-tcp DBusServer runs out of memory (fd.o #107194, Simon McVittie) ? Don't use misleading errno-derived error names if getaddrinfo() or getnameinfo() fails with a code other than EAI_SYSTEM (fd.o #106395, Simon McVittie) ? Skip tests that require working TCP if we are in a container environment where 127.0.0.1 cannot be resolved (fd.o #106812, Simon McVittie) * Changelog for 1.12.8 ? The Devhelp documentation index is now in version 2 format (fd.o #106186, Simon McVittie) ? Give the dbus-daemon man page some scarier warnings about <allow_anonymous/> and non-local TCP, which are insecure and should not be used, particularly for the standard system and session buses (fd.o #106004, Simon McVittie) ? Fix installation of Ducktype documentation with newer yelp-build versions (fd.o #106171, Simon McVittie) ==== dbus-1-x11 ==== Version update (1.12.6 -> 1.12.10) - Update to 1.12.10 * Changelog for 1.12.10 ? Prevent reading up to 3 bytes beyond the end of a truncated message. This could in principle be an information leak or denial of service on the system bus, but is not believed to be exploitable to crash the system bus or leak interesting information in practice. (fd.o #107332, Simon McVittie) ? Fix build with gcc 8 -Werror=cast-function-type (fd.o #107349, Simon McVittie) ? Fix warning from gcc 8 about suspicious use of strncpy() when populating struct sockaddr_un (fd.o #107350, Simon McVittie) ? Fix a minor memory leak when a DBusServer listens on a new address (fd.o #107194, Simon McVittie) ? Fix an invalid NULL argument to rmdir() if a nonce-tcp DBusServer runs out of memory (fd.o #107194, Simon McVittie) ? Don't use misleading errno-derived error names if getaddrinfo() or getnameinfo() fails with a code other than EAI_SYSTEM (fd.o #106395, Simon McVittie) ? Skip tests that require working TCP if we are in a container environment where 127.0.0.1 cannot be resolved (fd.o #106812, Simon McVittie) * Changelog for 1.12.8 ? The Devhelp documentation index is now in version 2 format (fd.o #106186, Simon McVittie) ? Give the dbus-daemon man page some scarier warnings about <allow_anonymous/> and non-local TCP, which are insecure and should not be used, particularly for the standard system and session buses (fd.o #106004, Simon McVittie) ? Fix installation of Ducktype documentation with newer yelp-build versions (fd.o #106171, Simon McVittie) ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - Fix overflow in sector count calculation (bsc#1105163) * grub2-msdos-fix-overflow.patch ==== hexchat ==== Version update (2.14.1 -> 2.14.2) Subpackages: hexchat-lang - update to 2.14.2 * remove shift+click binding to close tabs * re-add option to build against legacy perl * add appstream metainfo for plugins * add build option to set perl binary * add option to build without appstream * fix not unminimizing when restoring from tray * fix translations containing invalid text events * fix server passwords starting with : * update libraries on windows, fixing CVE-2018-15120 (and emoji!) ==== kcmutils ==== Subpackages: libKF5KCMUtils5 libKF5KCMUtils5-lang - Add patch to fix default size of kcms (kde#389585): * 0001-Use-custom-QScrollArea-with-size-hint-not-limited-by.patch ==== kdevelop5 ==== Subpackages: kdevelop5-lang kdevplatform kdevplatform-lang libkdevplatform52 - Add requirements for kdevplatform-devel which are not detected automatically. - Add kdevplatform-reduce-dependencies.diff to prevent adding unneeded requirements to the kdevplatform-devel package. - Run spec-cleaner ==== krita ==== Subpackages: krita-lang - Add fix-build-with-dcraw-0.19.patch to fix compilation with the latest libraw - Remove unnecessary libkdcraw-devel BuildRequires, krita doesn't use it anymore since a while ==== libHX ==== Version update (3.22 -> 3.23) Subpackages: libHX28 libHX28-32bit - Update to new upstream release 3.23 * opt parser: Support long option abbreviations. * io: Deprecate use of readdir_, use readdir. ==== libqt5-qtbase ==== Subpackages: libQt5Concurrent5 libQt5Core5 libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5OpenGL5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-sqlite libQt5Test5 libQt5Widgets5 libQt5Xml5 libqt5-qtbase-platformtheme-gtk3 - Pass CFLAGS and CXXFLAGS to configure explicitly to ensure that they are used ==== pam ==== Subpackages: pam-32bit pam-devel - Add libdb as build-time dependency to enable pam_userdb module. This module is useful for implementing virtual user support for vsftpd and possibly other daemons, too. [bsc#929711, fate#322538] ==== postfix ==== Subpackages: postfix-doc - Add zlib-devel as buildrequires, previously included from openssl-devel ==== python-kiwi ==== Version update (9.16.6 -> 9.16.12) - Bump version: 9.16.11 ? 9.16.12 - Follow up fix for skip_cleanup use make sure doc_travis tox target has created the manual pages such that the environment contains this data - Bump version: 9.16.10 ? 9.16.11 - Use skip_cleanup for deploy stage in travis We need the tox build environment to run the deployment - Bump version: 9.16.9 ? 9.16.10 - Follow up fix for deploy target Integration of man pages must be done as part of the sdist setup because the travis pypi deployment only uses the sdist target to bundle the sources - Bump version: 9.16.8 ? 9.16.9 - Fixed deploy target As part of the deploy process in travis a bundle to pypi is uploaded. The bundle is missing the compiled manual pages because the doc_travis stage did not create them. - Bump version: 9.16.7 ? 9.16.8 - Update pxe server setup documentation Delete the suggested modifications to /etc/sysconfig/atftpd and trust the defaults provided by the package - Added support for system wide config file If there is no user specific config file we are also looking for a system wide /etc/kiwi.yml file - use more meaningful variable names - Fix baseStripUnusedLibs config method This commit arguments handling of the baseStripUnusedLibs that was not prepared to handle quoted variable containing a list. Fixes #798 - Added doc chapter for remote live boot - Added support for pxe live boot via AOE The live ISO should support a network reference. We are using the Ata Over Ethernet protocol to achieve this. In combination with pxe boot of the kernel/initrd a live iso can boot from the network using the following parameter example: root=live:AOEINTERFACE:e0.1 rd.kiwi.live.pxe Export of the live iso file via AOE can be achieved using the vblade toolkit which needs to be available on the exporting system and compatible with the live operating system. This Fixes #796 - Run schema validation/update per XSL stylesheets - Added XSL stylesheet to auto update schema Drop oem-ataraid-scan from oemconfig if specified - Update vagrant doc chapter redirect links - Drop oem-ataraid-scan from schema Along with the change we pin generateDS version to 2.29.14 because the newer version (2.29.19) creates broken python syntax for elements with a value list for their content like it's the case for the packagemanager element. The tool uses the name k.packagemanager.content as class name which is invalid for python. - Delete dmraid aka: softraid soft/fakeraid support In fate#323743 the decision was made to drop dmraid from the distribution. Along with the low business case for those controllers and the support for linux softraid via mdadm we also drop the support in kiwi for oem-ataraid-scan - Fixed unresolvables in EC2 integration build For some reason libyui-ncurses-pkg8 is gone now - Fixed unresolvables in integration builds For some reason libyui-ncurses-pkg8 is gone now - Bump version: 9.16.6 ? 9.16.7 - update vagrant doc chapter per review by Tom - Added vagrant setup chapter in the docs Document steps to create a vagrant box for the libvirt provider. Also provide information on provider support This Fixes #792 - Use xattr 0.9.3 Latest xattr is broken on pip - Fixed make obs_test_status The helper script .obs_test_status looks up the build results from the integration tests. With the introduction of multibuild integration tests the script has to apply some modifications to get the correct results This is related to Issue #791 ==== rpm-config-SUSE ==== - Break build cycle with rpm ==== rtl8812au ==== Version update (5.2.20_k4.18.5_1 -> 5.2.20.2_k4.18.5_1) - Add new supported hardware to the preamble file - Update to version 5.2.20.2 * Update phydm to improve TP stability * Support WiFi-HAL for Android 8 * Build with kernel 4.19 - Drop patch allow-reproducible-builds.patch which was merged upstream by gordboy - Fix build with Leap 15 by parsing correctly the lp150 suffix ==== schily ==== Version update (2018.05.25 -> 2018.08.24) Subpackages: libdeflt1_0 librmt1_0 libschily1_0 spax star - Update to new upstream release 2018.08.24 * star: SELinux support has been added. * star: dotdot atacks are now also detected if they are based on DOS filesystem semantics. * star: Added a new check for the exit code of the compress program. * star: A hard EOF on input now results in a non-zero exit code. * star: Now defaults to use "ssh" for the remote tape interface. * star: There is now a way to make -no-fsync the default behavior to avoid slow operation on platforms with slow buffer cache. * librmt: added a way to configure the remote shell and the remote tape server path. * star: support for unlimited file path length. * libschily: a new set of gt*() and fgt*() functions with gettext() support have been added. * Bourne Shell: avoid a core dump with missing HOME. * libfind: added a new primary "-call" that allows to call back into the program instead of calling exec(). * libfind: new primaries -newerat, -newermt, -newerct. - Remove schily-2018-05-25_star_detect_gzip_failures.patch, schily-2018-05-25_star_use_ssh_by_default.patch, schily-2018-05-25_star_no_fsync.patch, schily-2018-05-25_star_selinux.patch (merged upstream) - Remove schily-2018-05-25_star_mk.patch (no longer needed) - Drop Conflicts against cpio-mt/tar-rmt, since update-alternatives is used as an arbitraring mechanism. - Add Provides: mt, rmt. ==== valgrind ==== - Filter out -m64 from optflags, breaks build of 32 bit parts - Cleanup, remove suse_version < 1100 conditionals - Use %license for COPYING, COPYING.DOCS - Fix missing debuginfo with current binutils, boo#1103239 0001-Accept-read-only-PT_LOAD-segments-and-.rodata.patch ==== xfce4-branding-openSUSE ==== Subpackages: exo-branding-openSUSE libgarcon-branding-openSUSE libxfce4ui-branding-openSUSE midori-branding-openSUSE openSUSE-xfce-icon-theme thunar-volman-branding-openSUSE xfce4-notifyd-branding-openSUSE xfce4-panel-branding-openSUSE xfce4-power-manager-branding-openSUSE xfce4-session-branding-openSUSE xfce4-settings-branding-openSUSE xfdesktop-branding-openSUSE xfwm4-branding-openSUSE - xfce4-panel-branding-openSUSE: * add statusnotifier plugin * add notification plugin (from xfce4-notifyd) - revert last change, branding package has been fixed - fix openSUSE splash screen ==== xmlgraphics-commons ==== Version update (2.1 -> 2.3) - Do not run target maven_artifacts as it just copies file from a->b and fails with newer ant - Update to version 2.3: * no changelog available ==== xmlgraphics-fop ==== - Fix building with ant >= 1.9.12 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Number of serial devices
by Peter Suetterlin 04 Sep '18

04 Sep '18

Hi list, I just noticed the serial_8250 driver in the opensuse kernel is set to support AND initialize/create 32 serial ports. Is this still useful on a nowadays desktop machine? And even if CONFIG_SERIAL_8250_NR_UARTS=32 is set, why not set CONFIG_SERIAL_8250_RUNTIME_UARTS to something more reasonable? (It's also set to 32). I know I can override it with 8250.nr_uarts kernel parameter, but it would be more logical that this is used by someone who really has a lot of serial ports. (I ran across it because wine automatically sets links in ~/.wine/dosdevices/ for serial hardware. So I end up with com1-com34, where com33 and com34 are the actually useful ones, being the ttyUSB? units almost anyone likely uses nowadays...) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

15 46

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

openSUSE Factory September 2018